To verify a ssh signature we first call ssh-keygen -Y find-principal to
look up the signing principal by their public key from the
allowedSignersFile. If the key is found then we do a verify. Otherwise
we only validate the signature but can not verify the signers identity.
Verification uses the gpg.ssh.allowedSignersFile (see ssh-keygen(1) "ALLOWED
SIGNERS") which contains valid public keys and a principal (usually
user@domain). Depending on the environment this file can be managed by
the individual developer or for example generated by the central
repository server from known ssh keys with push access. This file is usually
stored outside the repository, but if the repository only allows signed
commits/pushes, the user might choose to store it in the repository.
To revoke a key put the public key without the principal prefix into
gpg.ssh.revocationKeyring or generate a KRL (see ssh-keygen(1)
"KEY REVOCATION LISTS"). The same considerations about who to trust for
verification as with the allowedSignersFile apply.
Using SSH CA Keys with these files is also possible. Add
"cert-authority" as key option between the principal and the key to mark
it as a CA and all keys signed by it as valid for this CA.
See "CERTIFICATES" in ssh-keygen(1).
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user.signingkey is not set and a ssh signature is requested we call
gpg.ssh.defaultKeyCommand (typically "ssh-add -L") and use the first key we get
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implements the actual sign_buffer_ssh operation and move some shared
cleanup code into a strbuf function
Set gpg.format = ssh and user.signingkey to either a ssh public key
string (like from an authorized_keys file), or a ssh key file.
If the key file or the config value itself contains only a public key
then the private key needs to be available via ssh-agent.
gpg.ssh.program can be set to an alternative location of ssh-keygen.
A somewhat recent openssh version (8.2p1+) of ssh-keygen is needed for
this feature. Since only ssh-keygen is needed it can this way be
installed seperately without upgrading your system openssh packages.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] 9674c1991d/scripts/verify-git-tag (L43)
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gpg --verify usage example within the 'gpg.program' variable
reference provides an incorrect example of the gpg --verify command
arguments.
The command argument order, when providing both a detached signature
and data, should be signature first and data second:
https://gnupg.org/documentation/manuals/gnupg/Operational-GPG-Commands.html
Signed-off-by: Robert Morgan <robert.thomas.morgan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tabs happen to appear in columns where they don't stand out too
much, so the diff here is non-obvious. Some of these are rendered
differently by AsciiDoc and Asciidoctor (although the difference might
be invisible!), which is how I found a few of them. The remainder were
found using `git grep "[a-zA-Z.,)]$TAB[a-zA-Z]"`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fabian Stelzer
Hans Jerry Illikainen
Junio C Hamano
Robert Morgan
Martin Ågren
Nguyễn Thái Ngọc Duy