The git command "commit" supports a number of hooks that support
changing the behavior of the commit command. The git-p4.py program only
has one existing hook, "p4-pre-submit". This command occurs early in
the process. There are no hooks in the process flow for modifying
the P4 changelist text programmatically.
Adds 3 new hooks to git-p4.py to the submit option.
The new hooks are:
* p4-prepare-changelist - Execute this hook after the changelist file
has been created. The hook will be executed even if the
--prepare-p4-only option is set. This hook ignores the --no-verify
option in keeping with the existing behavior of git commit.
* p4-changelist - Execute this hook after the user has edited the
changelist. Do not execute this hook if the user has selected the
--prepare-p4-only option. This hook will honor the --no-verify,
following the conventions of git commit.
* p4-post-changelist - Execute this hook after the P4 submission process
has completed successfully. This hook takes no parameters and is
executed regardless of the --no-verify option. It's return value will
not be checked.
The calls to the new hooks: p4-prepare-changelist, p4-changelist,
and p4-post-changelist should all be called inside the try-finally
block.
Signed-off-by: Ben Keene <seraphire@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new command line option --no-verify:
Add a new command line option "--no-verify" to the Submit command of
git-p4.py. This option will function in the spirit of the existing
--no-verify command line option found in git commit. It will cause the
P4 Submit function to ignore the existing p4-pre-submit.
Change the execution of the existing trigger p4-pre-submit to honor the
--no-verify option. Before exiting on failure of this hook, display
text to the user explaining which hook has failed and the impact
of using the --no-verify option.
Change the call of the p4-pre-submit hook to use the new run_git_hook
function. This is in preparation of additional hooks to be added.
Signed-off-by: Ben Keene <seraphire@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mainly refers to enforcing indentation on additional lines of
items of lists.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous git-p4 unshelve support would check for changes
in Perforce to the files being unshelved since the original
shelve, and would complain if any were found.
This was to ensure that the user wouldn't end up with both the
shelved change delta, and some deltas from other changes in their
git commit.
e.g. given fileA:
the
quick
brown
fox
change1: s/the/The/ <- p4 shelve this change
change2: s/fox/Fox/ <- p4 submit this change
git p4 unshelve 1 <- FAIL
This change teaches the P4Unshelve class to always create a parent
commit which matches the P4 tree (for the files being unshelved) at
the point prior to the P4 shelve being created (which is reported
in the p4 description for a shelved changelist).
That then means git-p4 can always create a git commit matching the
P4 shelve that was originally created, without any extra deltas.
The user might still need to use the --origin option though - there
is no way for git-p4 to work out the versions of all of the other
*unchanged* files in the shelve, since this information is not recorded
by Perforce.
Additionally this fixes handling of shelved 'move' operations.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch detection code looks for branches under refs/remotes/p4/...
and can end up getting confused if there are unshelved changes in
there as well. This happens in the function p4BranchesInGit().
Instead, put the unshelved changes into refs/remotes/p4-unshelved/<N>.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `p4-pre-submit` hook is executed before git-p4 submits code.
If the hook exits with non-zero value, submit process not start.
Signed-off-by: Chen Bin <chenbin.sh@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" updates.
* ld/git-p4-updates:
git-p4: auto-size the block
git-p4: narrow the scope of exceptions caught when parsing an int
git-p4: raise exceptions from p4CmdList based on error from p4 server
git-p4: better error reporting when p4 fails
git-p4: add option to disable syncing of p4/master with p4
git-p4: disable-rebase: allow setting this via configuration
git-p4: add options --commit and --disable-rebase
Add an option to the git-p4 submit command to disable syncing
with Perforce.
This is useful for the case where a git-p4 mirror has been setup
on a server somewhere, running from (e.g.) cron, and developers
then clone from this. Having the local cloned copy also sync
from Perforce just isn't useful.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just lets you set the --disable-rebase option with the
git configuration options git-p4.disableRebase. If you're
using this option, you probably want to set it all the time
for a given repo.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a daily work with multiple local git branches, the usual way to
submit only a specified commit was to cherry-pick the commit on
master then run git-p4 submit. It can be very annoying to switch
between local branches and master, only to submit one commit. The
proposed new way is to select directly the commit you want to
submit.
Add option --commit to command 'git-p4 submit' in order to submit
only specified commit(s) in p4.
On a daily work developping software with big compilation time, one
may not want to rebase on his local git tree, in order to avoid long
recompilation.
Add option --disable-rebase to command 'git-p4 submit' in order to
disable rebase after submission.
Thanks-to: Cedric Borgese <cedric.borgese@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Romain Merland <merlorom@yahoo.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency, use backquotes when referring to environment
variables, as is done in other man pages.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to "unshelve" a shelved P4 commit into
a git commit.
For example:
$ git p4 unshelve 12345
The resulting commit ends up in the branch:
refs/remotes/p4/unshelved/12345
If that branch already exists, it is renamed - for example
the above branch would be saved as p4/unshelved/12345.1.
git-p4 checks that the shelved changelist is based on files
which are at the same Perforce revision as the origin branch
being used for the unshelve (HEAD by default). If they are not,
it will refuse to unshelve. This is to ensure that the unshelved
change does not contain other changes mixed-in.
The reference branch can be changed manually with the "--origin"
option.
The change adds a new Unshelve command class. This just runs the
existing P4Sync code tweaked to handle a shelved changelist.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--update-shelve can now be specified multiple times on the
command-line, to update multiple shelved changelists in a single
submit.
This then means that a git patch series can be mirrored to a
sequence of shelved changelists, and (relatively easily) kept in
sync as changes are made in git.
Note that Perforce does not really support overlapping shelved
changelists where one change touches the files modified by
another. Trying to do this will result in merge conflicts.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent updates to "git p4" was not usable for older p4 but it
could be made to work with minimum changes. Do so.
* ls/p4-retry-thrice:
git-p4: do not pass '-r 0' to p4 commands
git-p4 crashes when used with a very old p4 client version
that does not support the '-r <number>' option in its commands.
Allow making git-p4 work with old p4 clients by setting git-p4.retries to 0.
Alternatively git-p4.retries could be made opt-in.
But since only very old, barely maintained p4 versions don't support
the '-r' option, the setting-retries-to-0 workaround would do.
The "-r retries" option is present in Perforce 2012.2 Command Reference,
but absent from Perforce 2012.1 Command Reference.
Signed-off-by: Igor Kushnir <igorkuo@gmail.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
P4 commands can fail due to random network issues. P4 users can counter
these issues by using a retry flag supported by all p4 commands [1].
Add an integer Git config value `git-p4.retries` to define the number of
retries for all p4 invocations. If the config is not defined then set
the default retry count to 3.
[1] https://www.perforce.com/perforce/doc.current/manuals/cmdref/global.options.html
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds new option "--update-shelve CHANGELIST" which updates
an existing shelved changelist.
The original changelist must have been created by the current user.
This allows workflow something like:
hack hack hack
git commit
git p4 submit --shelve
$mail interested parties about shelved changelist
make corrections
git commit --amend
git p4 submit --update-shelve $CHANGELIST
$mail interested parties about shelved changelist
etc
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --shelve command line argument which invokes p4 shelve instead
of submitting changes. After shelving the changes are reverted from the
p4 workspace.
Signed-off-by: Vinicius Kursancew <viniciusalexandre@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
This is an application of the newly added CodingGuidelines to HEAD and
variants like FETCH_HEAD. It was obtained with:
perl -pi -e "s/'([A-Z_]*HEAD)'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
Wrap with backticks (monospaced font) unwrapped or single-quotes wrapped
(italic type) environment variables which are followed by the word
"environment". It was obtained with:
perl -pi -e "s/\'?(\\\$?[0-9A-Z\_]+)\'?(?= environment ?)/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change GIT_* variables that where in italic style to monospaced font
according to the guideline. It was obtained with
perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Map a P4 user to a specific name and email address in Git with the
"git-p4.mapUser" config. The config value must be a string adhering
to the format "p4user = First Lastname <email@address.com>".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
A changelist that contains only excluded files due to a client spec was
imported as an empty commit. Fix that issue by ignoring these commits.
Add option "git-p4.keepEmptyCommits" to make the previous behavior
available.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Pete Harlan
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git p4" to send large blobs outside the repository by
talking to Git LFS.
* ls/p4-lfs:
git-p4: add Git LFS backend for large file system
git-p4: add support for large file systems
git-p4: check free space during streaming
git-p4: add file streaming progress in verbose mode
git-p4: return an empty list if a list config has no values
git-p4: add gitConfigInt reader
git-p4: add optional type specifier to gitConfig reader
Perforce repositories can contain large (binary) files. Migrating these
repositories to Git generates very large local clones. External storage
systems such as Git LFS [1], Git Fat [2], Git Media [3], git-annex [4]
try to address this problem.
Add a generic mechanism to detect large files based on extension,
uncompressed size, and/or compressed size.
[1] https://git-lfs.github.com/
[2] https://github.com/jedbrown/git-fat
[3] https://github.com/alebedev/git-media
[4] https://git-annex.branchable.com/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Conflicts:
Documentation/git-p4.txt
git-p4.py
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce keeps the encoding of a path as given by the originating OS.
Git expects paths encoded as UTF-8. Add a config to tell git-p4 what
encoding Perforce had used for the paths. This encoding is used to
transcode the paths to UTF-8. As an example, Perforce on Windows often
uses “cp1252” to encode path names.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply running "p4 changes" on a large branch can result in a "too
many rows scanned" error from the Perforce server. It is better to
use a sequence of smaller calls to "p4 changes", using the "-m"
option to limit the size of each call.
Signed-off-by: Lex Spoon <lex@lexspoon.org>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clone subcommand has long had support for excluding
subdirectories, but sync has not. This is a nuisance,
since as soon as you do a sync, any changed files that
were initially excluded start showing up.
Move the "exclude" command-line option into the parent
class; the actual behavior was already present there so
it simply had to be exposed.
Signed-off-by: Luke Diamand <luke@diamand.org>
Reviewed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast noticed the docs have a mix of styles when
it comes to options with multiple spellings. Standardize
the couple in git-p4.txt that are odd.
Instead of:
-n, --dry-run::
Do this:
-n::
--dry-run::
See
http://thread.gmane.org/gmane.comp.version-control.git/219936/focus=219945
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo ("remote remote-tracking") going back to the big cleanup
in 2010 (8b3f3f84 etc). Also, remove some more occurrences of
"tracking" and "remote tracking" in favor of "remote-tracking".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation to change "GIT" which was a poor-man's small
caps to "Git". The latter was the intended spelling.
Also change "git" spelled in all-lowercase to "Git" when it refers
to the system as the whole or the concept it embodies, as opposed to
the command the end users would type.
* ta/doc-no-small-caps:
Documentation: StGit is the right spelling, not StGIT
Documentation: describe the "repository" in repository-layout
Documentation: add a description for 'gitfile' to glossary
Documentation: do not use undefined terms git-dir and git-file
Documentation: the name of the system is 'Git', not 'git'
Documentation: avoid poor-man's small caps GIT
It finds its upstream and applies the commit properly, but
the sync step will fail unless it is told which branch to
work on.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is legal to sync a branch with a different name than
refs/remotes/p4/master, and to do so even when master does
not exist.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a clone or sync, --branch says where the newly imported
branch should go, or which existing branch to sync up. It
takes an argument, which is currently either something that
starts with "refs/", or if not, "refs/heads/p4" is prepended.
Putting it in heads seems like a bad default; these should
go in remotes/p4/ in most situations. Make that the new default,
and be more liberal in the form of the branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that the example on how to use git-p4.branchList
works if typed directly. In particular, it does not make sense
to set a config variable until the git repository has been
initialized.
Reported-by: Olivier Delalleau <shish@keba.be>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --branch argument to "git p4 clone", one
might specify a destination for p4 changes different from
the default refs/remotes/p4/master. Both cases should
create a master branch and checkout files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
