Change the log formatting function to know about "git describe" output
such as "v2.8.0-4-g867ad08", in addition to just plain "867ad08".
There are still many valid refnames that we don't link to
e.g. v2.10.0-rc1~2^2~1 is also a valid way to refer to
v2.8.0-4-g867ad08, but I'm not supporting that with this commit,
similarly it's trivially possible to create some refnames like
"æ/var-gf6727b0" or which won't be picked up by this regex.
There's surely room for improvement here, but I just wanted to address
the very common case of sticking "git describe" output into commit
messages without trying to link to all possible refnames, that's going
to be a rather futile exercise given that this is free text, and it
would be prohibitively expensive to look up whether the references in
question exist in our repository.
There was on-list discussion about how we could do better than this
patch. Junio suggested to update parse_commits() to call a new
"gitweb--helper" command which would pass each of the revision
candidates through "rev-parse --verify --quiet". That would cut down
on our false positives (e.g. we'll link to "deadbeef"), and also allow
us to be more aggressive in selecting candidate revisions.
That may be too expensive to work in practice, or it may
not. Investigating that would be a good follow-up to this patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the minimum length of an abbreviated object identifier in the
commit message gitweb tries to turn into link from 8 hexchars to 7.
This arbitrary minimum length of 8 was introduced in bfe2191 ("gitweb:
SHA-1 in commit log message links to "object" view", 2006-12-10), but
the default abbreviation length is 7, and has been for a long time.
It's still possible to reference SHA-1s down to 4 characters in length,
see v1.7.4-1-gdce9648's MINIMUM_ABBREV, but I can't see how to make
git actually produce that, so I doubt anyone is putting that into log
messages in practice, but people definitely do put 7 character SHA-1s
into log messages.
I think it's fairly dubious to link to things matching [0-9a-fA-F]
here as opposed to just [0-9a-f], that dates back to the initial
version of gitweb from 161332a ("first working version",
2005-08-07). Git will accept all-caps SHA-1s, but didn't ever produce
them as far as I can tell.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a typo'd MIME type in a comment. The Content-Type is
application/xhtml+xml, not application/xhtm+xml.
Fixes up code originally added in 53c4031 ("gitweb: Strip
non-printable characters from syntax highlighter output", 2011-09-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "const char *" to "char *" in struct trailer_item and in the
return value of apply_command (since those strings are owned strings).
Change "struct conf_info *" to "const struct conf_info *" (since that
struct is not modified).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we auto-follow tags in a fetch, we look at all of the
tags advertised by the remote and fetch ones where we don't
already have the tag, but we do have the object it peels to.
This involves a lot of calls to has_sha1_file(), some of
which we can reasonably expect to fail. Since 45e8a74
(has_sha1_file: re-check pack directory before giving up,
2013-08-30), this may cause many calls to
reprepare_packed_git(), which is potentially expensive.
This has gone unnoticed for several years because it
requires a fairly unique setup to matter:
1. You need to have a lot of packs on the client side to
make reprepare_packed_git() expensive (the most
expensive part is finding duplicates in an unsorted
list, which is currently quadratic).
2. You need a large number of tag refs on the server side
that are candidates for auto-following (i.e., that the
client doesn't have). Each one triggers a re-read of
the pack directory.
3. Under normal circumstances, the client would
auto-follow those tags and after one large fetch, (2)
would no longer be true. But if those tags point to
history which is disconnected from what the client
otherwise fetches, then it will never auto-follow, and
those candidates will impact it on every fetch.
So when all three are true, each fetch pays an extra
O(nr_tags * nr_packs^2) cost, mostly in string comparisons
on the pack names. This was exacerbated by 47bf4b0
(prepare_packed_git_one: refactor duplicate-pack check,
2014-06-30) which uses a slightly more expensive string
check, under the assumption that the duplicate check doesn't
happen very often (and it shouldn't; the real problem here
is how often we are calling reprepare_packed_git()).
This patch teaches fetch to use HAS_SHA1_QUICK to sacrifice
accuracy for speed, in cases where we might be racy with a
simultaneous repack. This is similar to the fix in 0eeb077
(index-pack: avoid excessive re-reading of pack directory,
2015-06-09). As with that case, it's OK for has_sha1_file()
occasionally say "no I don't have it" when we do, because
the worst case is not a corruption, but simply that we may
fail to auto-follow a tag that points to it.
Here are results from the included perf script, which sets
up a situation similar to the one described above:
Test HEAD^ HEAD
----------------------------------------------------------
5550.4: fetch 11.21(10.42+0.78) 0.08(0.04+0.02) -99.3%
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark error messages for translation passed to error() and die()
functions.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages for translation printed to stderr.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test introduced in this commit succeeds without the patch to Git.pm
if Mail::Address is installed, but fails otherwise because our in-house
parser does not accept any text after the email address. They succeed
both with and without Mail::Address after this commit.
Mail::Address accepts extra text and considers it as part of the name,
iff the address is surrounded with <...>. The implementation mimics
this behavior as closely as possible.
This mostly restores the behavior we had before b1c8a11 (send-email:
allow multiple emails using --cc, --to and --bcc, 2015-06-30), but we
keep the possibility to handle comma-separated lists.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bare repositories, get_worktrees() still returns the main repository,
so git worktree list can show it. ignore it in find_shared_symref so we
can still check out the main branch.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn internals were previously not aware of repository
layout differences for users of the "git worktree" command.
Introduce this awareness by using "git rev-parse --git-path"
instead of relying on outdated uses of GIT_DIR and friends.
Thanks-to: Duy Nguyen <pclouds@gmail.com>
Reported-by: Mathieu Arnold <mat@freebsd.org>
Signed-off-by: Eric Wong <e@80x24.org>
Reducing the scope of where we change the record separator ($/)
avoids bugs in calls which rely on the input record separator
further down, such as the 'chomp' usage in command_oneline.
This is necessary for a future change to git-svn, but exists in
Git.pm since it seems useful for gitweb and our other Perl
scripts, too.
Signed-off-by: Eric Wong <e@80x24.org>
The --fork-point option looks in the reflog to try to find
where a derived branch forked from a base branch. However,
if the reflog for the base branch is totally empty (as it
commonly is right after cloning, which does not write a
reflog entry), then our for_each_reflog call will not find
any entries, and we will come up with no merge base, even
though there may be one with the current tip of the base.
We can fix this by just adding the current tip to
our list of collected entries.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d64ea0f83b ("git-compat-util: add xstrdup_or_null helper",
2015-01-12) added a handy wrapper that allows us to get a duplicate
of a string or NULL if the original is NULL, but a handful of
codepath predate its introduction or just weren't aware of it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to gpg2's doc/DETAILS:
For each signature only one of the codes GOODSIG, BADSIG,
EXPSIG, EXPKEYSIG, REVKEYSIG or ERRSIG will be emitted.
gpg1 ("classic") behaves the same (although doc/DETAILS differs).
Currently, we parse gpg's status output for GOODSIG, BADSIG and
trust information and translate that into status codes G, B, U, N
for the %G? format specifier.
git-verify-* returns success in the GOODSIG case only. This is
somewhat in disagreement with gpg, which considers the first 5 of
the 6 above as VALIDSIG, but we err on the very safe side.
Introduce additional status codes E, X, Y, R for ERRSIG, EXPSIG,
EXPKEYSIG, and REVKEYSIG so that a user of %G? gets more information
about the absence of a 'G' on first glance.
Requested-by: Alex <agrambot@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned message was marked for translation by 0c99171
("get_short_sha1: mark ambiguity error for translation", 2016-09-26).
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like a lot of old commit-traversal code, this keeps a
commit_list in commit-date order, and and inserts parents
into the list. This means each insertion is potentially
linear, and the whole thing is quadratic (though the exact
runtime depends on the relationship between the commit dates
and the parent topology).
These days we have a priority queue, which can do the same
thing with a much better worst-case time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A low-level function verify_packfile() was meant to show errors
that were detected without dying itself, but under some conditions
it didn't and died instead, which has been fixed.
* jk/verify-packfile-gently:
verify_packfile: check pack validity before accessing data
"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting. The command has been taught to read the
default set of configuration variables to correct this.
* jc/worktree-config:
worktree: honor configuration variables
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
The original command line syntax for "git merge", which was "git
merge <msg> HEAD <parent>...", has been deprecated for quite some
time, and "git gui" was the last in-tree user of the syntax. This
is finally fixed, so that we can move forward with the deprecation.
* rs/git-gui-use-modern-git-merge-syntax:
git-gui: stop using deprecated merge syntax
An author name, that spelled a backslash-quoted double quote in the
human readable part "My \"double quoted\" name", was not unquoted
correctly while applying a patch from a piece of e-mail.
* kd/mailinfo-quoted-string:
mailinfo: unescape quoted-pair in header fields
t5100-mailinfo: replace common path prefix with variable
Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.
* jc/blame-abbrev:
blame: use DEFAULT_ABBREV macro
The "graph" API used in "git log --graph" miscounted the number of
output columns consumed so far when drawing a padding line, which
has been fixed; this did not affect any existing code as nobody
tried to write anything after the padding on such a line, though.
* jk/graph-padding-fix:
graph: fix extra spaces in graph_padding_line
The code that parses the format parameter of for-each-ref command
has seen a micro-optimization.
* sg/ref-filter-parse-optim:
ref-filter: strip format option after a field name only once while parsing
This is based on the existing gnome-keyring helper, but instead of
libgnome-keyring (which was specific to GNOME and is deprecated), it
uses libsecret which can support other implementations of XDG Secret
Service API.
Passes t0303-credential-external.sh.
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Reviewed-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The <tree-ish> parameter is actually optional (see man page).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach mergetool to pass "-O<orderfile>" down to `git diff` when
specified on the command-line.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach mergetool to get the list of files to edit via `diff` so that we
gain support for diff.orderFile.
Suggested-by: Luis Gutierrez <luisgutz@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to follow the program's flow by isolating all
logic into functions. Isolate the main execution code path into
a single unit instead of having prompt_after_failed_merge()
interrupt it partyway through.
The use of a main() function is borrowing a convention from C,
Python, Perl, and many other languages. This helps readers more
familiar with other languages understand the purpose of each
function when diving into the codebase with fresh eyes.
Signed-off-by: David Aguilar <davvid@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike the url variable a user cannot override the the path variable,
as it is part of the content together with the gitlink at the given
path. To avoid confusion do not mention the .path variable in the config
section and rely on the documentation provided in gitmodules[5].
Enhance the description of submodule.<name>.url and mention its two use
cases separately.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit 2f8952250a ("regex: add regexec_buf() that can work on a
non NUL-terminated string", 2016-09-21) changed description of
NO_REGEX build config variable to be more neutral, and actually say
that it is about support for REG_STARTEND. Change description in
configure.ac to match.
Change also the test message and variable name to match. The test
just checks that REG_STARTEND is #defined.
Issue-found-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a common mistake to say "git blame --reverse OLD path",
expecting that the command line is dwimmed as if asking how lines
in path in an old revision OLD have survived up to the current
commit.
* jc/blame-reverse:
blame: dwim "blame --reverse OLD" as "blame --reverse OLD.."
blame: improve diagnosis for "--reverse NEW"
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
The command-line completion script (in contrib/) learned to
complete "git cmd ^mas<HT>" to complete the negative end of
reference to "git cmd ^master".
* cp/completion-negative-refs:
completion: support excluding refs
The ./configure script generated from configure.ac was taught how
to detect support of SSL by libcurl better.
* dp/autoconf-curl-ssl:
./configure.ac: detect SSL in libcurl using curl-config
When we started cURL to talk to imap server when a new enough
version of cURL library is available, we forgot to explicitly add
imap(s):// before the destination. To some folks, that didn't work
and the library tried to make HTTP(s) requests instead.
* ak/curl-imap-send-explicit-scheme:
imap-send: Tell cURL to use imap:// or imaps://
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of
the time third parameter is redundant. A new QSORT() macro lets us
omit it.
* rs/qsort:
show-branch: use QSORT
use QSORT, part 2
coccicheck: use --all-includes by default
remove unnecessary check before QSORT
use QSORT
add QSORT
This avoids "." and "..", as we already do, but also leaves
room for index-pack to store extra data in the quarantine
area (e.g., for passing back any analysis to be read by the
pre-receive hook).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The presence of the GIT_QUARANTINE_PATH variable lets any
called programs know that they're operating in a temporary
object directory (and where that directory is).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
