In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
According to sys/paramh.h it's a "BSD name" for values defined in
<limits.h>. Besides PATH_MAX seems to be more commonly used.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change unpack_entry_gently and its helper functions to use offsets
rather than addresses and left counts to supply pack position
information. In most cases this makes the code easier to follow,
and it reduces the number of local variables in a few functions.
It also better prepares this code for mapping partial segments of
packs and altering what regions of a pack are mapped while unpacking
an entry.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we're always incrementing both the offset and the pointer we
aren't gaining anything by keeping both. Instead just use the
offset since that's what we were given and what we are expected
to return. Also using offset is likely to make it easier to remap
the pack in the future should partial mapping of very large packs
get implemented.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH 3/5] Cleanup unpack_entry_gently and friends to use type_name array.
This change allows combining all of the non-delta entries into a
single case, as well as to remove an unnecessary local variable
in unpack_entry_gently.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH 2/5] Reuse compression code in unpack_compressed_entry.
This cleans up the code by reusing a perfectly good decompression
implementation at the expense of 1 extra byte of memory allocated in
temporary memory while the delta is being decompressed and applied
to the base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This function was moved above unpack_delta_entry so we can call it
from within unpack_delta_entry without a forward declaration.
This change looks worse than it is. Its really just a relocation
of unpack_non_delta_entry to earlier in the file and renaming the
function to unpack_compressed_entry. No other changes were made.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove workaround in git_blobdiff for error in git-diff (showing
reversed diff for diff of blobs), corrected in commit f82cd3c
Fix "git diff blob1 blob2" showing the diff in reverse. which
is post 1.4.2-rc2 commit.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (34 commits)
gitweb: git_annotate didn't expect negative numeric timezone
git-svn: add the 'dcommit' command
git-svn: recommend rebase for syncing against an SVN repo
git-svn: establish new connections on commit after fork
describe: fix off-by-one error in --abbrev=40 handling
git-svn(1): improve asciidoc markup
gitview.txt: improve asciidoc markup
git(7): put the synopsis in a verse style paragraph
gitk(1): expand the manpage to look less like a template
git-blame(1): mention options in the synopsis and advertise pickaxe
git-ls-remote(1): document --upload-pack
git-apply(1): document missing options and improve existing ones
update-index -g
n is in fact unused, and is later shadowed.
use name[len] in switch directly, instead of creating a shadowed variable.
builtin-grep.c: remove unused debugging piece.
remove ugly shadowing of loop indexes in subloops.
missing 'static' keywords
git_dir holds pointers to local strings, hence MUST be const.
avoid to use error that shadows the function name, use err instead.
...
This is a high-level wrapper around the 'commit-diff' command
and used to produce cleaner history against the mirrored repository
through rebase/reset usage.
It's basically a more polished version of this:
for i in `git rev-list --no-merges remotes/git-svn..HEAD | tac`; do
git-svn commit-diff $i~1 $i
done
git reset --hard remotes/git-svn
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Does this make sense to other git-svn users out there?
pull can give funky history unless you understand how git-svn works
internally, which users should not be expected to do.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
SVN seems to have a problem with https:// repositories from
time-to-time when doing multiple, sequential commits. This
problem is not consistently reproducible without the patch,
but it should go away entirely with this patch...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove $git_temp variable which held location for temporary files
needed by git_diff_print, and removed creating $git_temp directory.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove git_diff_print subroutine, used to print diff in previous
versions of "diff" actions, namely git_commitdiff,
git_commitdiff_plain, git_blobdiff, git_blobdiff_plain.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_blobdiff and git_blobdiff_plain are now collapsed into one
subroutine git_blobdiff, with format (currently 'html' which is
default format corresponding to git_blobdiff, and 'plain'
corresponding to git_blobdiff_plain) specified in argument.
blobdiff_plain format is now generated either by git-diff-tree
or by git-diff. Added X-Git-Url: header. From-file and to-file name
in header are corrected.
Note that for now commitdiff_plain does not detect renames
and copying, while blobdiff_plain does.
While at it, set expires to "+1d" for non-textual hash ids.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is second part of removing gitweb dependency on external
diff (used in git_diff_print).
Get rid of git_diff_print invocation in git_blobdiff, and use either
git-diff-tree (when both hash_base and hash_parent_base are provided)
patch format or git-diff patch format (when only hash and hash_parent
are provided) for output.
Supported URI schemes, and output formats:
* New URI scheme: both hash_base and hash_parent_base (trees-ish
containing blobs versions we want to compare) are provided.
Also either filename is provided, or hash (of blob) is provided
(we try to find filename then).
For this scheme we have copying and renames detection, mode changes,
file types etc., and information extended diff header is correct.
* Old URI scheme: hash_parent_base is not provided, we use hash and
hash_parent to directly compare blobs using git-diff. If no filename
is given, blobs hashes are used in place of filenames.
This scheme has always "blob" as file type, it cannot detect mode
changes, and we rely on CGI parameters to provide name of the file.
Added git_to_hash subroutine, which transforms symbolic name or list
of symbolic name to hash or list of hashes using git-rev-parse.
To have "blob" instead of "unknown" (or "file" regardless of the type)
in "gitweb diff header" for legacy scheme, file_type function now
returns its argument if it is not octal string.
Added support for fake "2" status code in git_patchset_body. Such code
is generated by git_blobdiff in legacy scheme case.
ATTENTION: The order of arguments (operands) to git-diff is reversed
(sic!) to have correct diff in the legacy (no hash_parent_base) case.
$hash_parent, $hash ordering is commented out, as it gives reversed
patch (at least for git version 1.4.1.1) as compared to output in new
scheme and output of older gitweb version.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change replacing hashes as from-file/to-file with filenames from
difftree to adding invisible (except underlining on hover/mouseover)
hyperlink to from-file/to-file blob. /dev/null as from-file or
to-file is not changed (is not hyperlinked).
This makes two-file from-file/to-file unified diff header parsing in
git_patchset_body more generic, and not only for legacy blobdiffs.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Parse two-line from-file/to-file unified diff header in
git_patchset_body directly, instead of leaving pretty-printing to
format_diff_line function. Hashes as from-file/to-file are replaced
by proper from-file and to-file names (from $diffinfo); in the future
we can put hyperlinks there. This makes possible to do blobdiff with
only blobs hashes.
The lines in two-line unified diff header have now class "from_file"
and "to_file"; the style is chosen to match previous output (classes
"rem" and "add" because of '-' and '+' as first character of patch
line).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Preparation for converting git_blobdiff and git_blobdiff_plain
to use git-diff-tree patch format to generate patches.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for hash_parent_base in input validation part and in
href() function. Add proper hash_parent_base to all calls to blobdiff
and blobdiff_plain action URLs. Use hash_parent_base as hash_base for
blobs of hash_parent.
To be used in future rewrite of git_blobdiff and git_blobdiff_plain.
While at it, move project before action in ordering CGI parameters in
href().
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use git_get_rev_name_tags function for X-Git-Tag: header in
git_commitdiff('plain'), i.e. for commitdiff_plain action.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git_get_rev_name_tags function, for later use in
git_commitdiff('plain') for X-Git-Tag: header.
This function, contrary to the call to
git_get_following_references($hash, "tags");
_does_ strip "tags/" and returns bare tag name.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Return on first ref found when git_get_preceding_references
is called in scalar context
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Adds git_get_following_references function, based on code which was
used in git_commitdiff_plain to generate X-Git-Tag: header,
and companion git_get_preceding_references function.
Both functions return array of all references of given type (as
returned by git_get_references) following/preceding given commit in
array (list) context, and last following/first preceding ref in scalar
context.
Stripping ref (list of refs) of "$type/" (e.g. "tags/") is left to
caller.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change output of patch(set) in git_commitdiff from slurping whole diff
in @patchset array before processing, to passing file descriptor to
git_patchset_body.
Advantages: faster, incremental output, smaller memory footprint.
Disadvantages: cannot react when there is error during closing file
descriptor.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In format_diff_line, instead of skipping errors/incomplete lines,
for example
"\ No newline at end of file"
in HTML pretty-printing of diff, use "incomplete" class for div.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Get rid of git_diff_print invocation in git_commitdiff and therefore
external diff (/usr/bin/diff) invocation, and use only git-diff-tree
to generate patch.
git_commitdiff and git_commitdiff_plain are collapsed into one
subroutine git_commitdiff, with format (currently 'html' which is
default format corresponding to git_commitdiff, and 'plain'
corresponding to git_commitdiff_plain) specified in argument.
Separate patch (diff) pretty-printing into git_patchset_body.
It is used in git_commitdiff.
Separate patch (diff) line formatting from git_diff_print into
format_diff_line function. It is used in git_patchset_body.
While at it, add $hash parameter to git_difftree_body, according to
rule that inner functions should use parameter passing, and not global
variables.
CHANGES TO OUTPUT:
* "commitdiff" now products patches with renaming and copying
detection (git-diff-tree is invoked with -M and -C options).
Empty patches (mode changes and pure renames and copying)
are not written currently. Former version broke renaming and
copying, and didn't notice mode changes, like this version.
* "commitdiff" output is now divided into several div elements
of class "log", "patchset" and "patch".
* "commitdiff_plain" now only generates X-Git-Tag: line only if there
is tag pointing to the current commit. Former version which wrote
first tag following current commit was broken[*1*]; besides we are
interested rather in tags _preceding_ the commit, and _heads_
following the commit. X-Git-Url: now is current URL; former version
tried[*2*] to output URL to HTML version of commitdiff.
* "commitdiff_plain" is generated by git-diff-tree, and has therefore
has git specific extensions to diff format: "git diff" header and
optional extended header lines.
FOOTNOTES
[*1*] First it generated rev-list starting from HEAD even if hash_base
parameter was set, second it wasn't corrected according to changes
made in git_get_references (formerly read_info_ref) output, third even
for older version of read_info_ref output it didn't work for multiple
tags pointing to the current commit (rare).
[*2*] It wrote URL for commitdiff without hash_parent, which produces
diff to first parent and is not the same as current diff if it is diff
of merge commit to non-first parent.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use list continuation to have better wrapping. This accounts for most of
the changes because it reindents a lot of text without applying other
changes.
Use cross-referencing for interlinking and the gitlink macro for pointing
to other tools in the git suite.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a short description and document a few selected options additionally to
the different "entities" in the standard calling convention. Advertise
other git repository browsers. Lastly, climb Mount Ego.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Inspired by the cvs annotate documentation improve and expand the man page
to also mention the limitations of file annotations. Since people coming
from the SVN/CVS world might first look here, also briefly advertise how
the pickaxe interface makes it easy to go beyond these limitation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and mention that '.' will list the local repo references.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I often find myself typing this but the common abbreviation "g" for
"again" has not been supported so far for some unknown reason.
Signed-off-by: Junio C Hamano <junkio@cox.net>
date.c::approxidate_alpha() counts the number of alphabets
while moving the pointer but does not use the count.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-apply.c defines a local variable 'c' which is used only
once and then later gets shadowed by another instance of 'c'.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-mv.c and git.c has a nested loop that is governed by a
variable 'i', but they shadow it with another instance of 'i'.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
