* bc/master-diff-hunk-header-fix:
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
t4018-diff-funcname: test syntax of builtin xfuncname patterns
t4018-diff-funcname: test syntax of builtin xfuncname patterns
make "git remote" report multiple URLs
diff hunk pattern: fix misconverted "\{" tex macro introducers
diff: fix "multiple regexp" semantics to find hunk header comment
diff: use extended regexp to find hunk headers
diff: use extended regexp to find hunk headers
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Conflicts:
builtin-merge-recursive.c
t/t7201-co.sh
xdiff-interface.h
* maint: (41 commits)
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
Remove empty directories in recursive merge
Documentation: clarify the details of overriding LESS via core.pager
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
builtin-prune.c: prune temporary packs in <object_dir>/pack directory
Do not perform cross-directory renames when creating packs
Use dashless git commands in setgitperms.perl
git-remote: do not use user input in a printf format string
make "git remote" report multiple URLs
Start draft release notes for 1.6.0.3
git-repack uses --no-repack-object, not --no-repack-delta.
...
Conflicts:
RelNotes
Currently, trying to use git-commit with unmerged files in the index
will show the message "Error building trees", which can be a bit
obscure to the end user. This patch makes the error message clearer, and
consistent with what git-write-tree reports in a similar situation.
Signed-off-by: Rafael Garcia-Suarez <rgarciasuarez@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
First, it adds less code than removes, second this allows us to use
recuce_heads() for parents, so that the parents of a merge will be
always the same with or without a conflict.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This outputs the current branch on which a commit was created, just for
reference. For example:
Created commit 6d42875 on master: Fix submodule invalid command error
This also reminds the committer when he is on a detached HEAD:
Created commit 02a7172 on detached HEAD: Also do this for 'git commit --amend'
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems (like e.g. OpenSolaris) define pid_t as long,
therefore all our sprintf that use %i/%d cause a compiler warning
beacuse of the implicit long->int cast. To make sure that
we fit the limits, we display pids as PRIuMAX and cast them explicitly
to uintmax_t.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows "git commit --author=$name" to accept a name that is not in
the required "A U Thor <author@example.xz>" format, and use that to look
up an author name that matches from existing commits.
When using this feature, it is the user's responsibility to give a name
that uniquely matches the name s/he wants, as the logic returns the name
from the first matching commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command like:
git log --pretty=format:%ad --date=short
the date option was ignored. This patch causes it to use whatever
format was specified by --date (or by --relative-date, etc), just
as the non-user formats would do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git commit -F file" and "git tag -F file" from a
subdirectory, we should take it as relative to the directory we started
from, not relative to the top-level directory.
This adds a helper function "parse_options_fix_filename()" to make it more
convenient to fix this class of issues. Ideally, parse_options() should
support a new type of option, "OPT_FILENAME", to do this uniformly, but
this patch is meant to go to 'maint' to fix it minimally.
One thing to note is that value for "commit template file" that comes from
the command line is taken as relative to $cwd just like other parameters,
but when it comes from the configuration varilable 'commit.template', it
is taken as relative to the working tree root as before. I think this
difference actually is sensible (not that I particularly think
commit.template itself is sensible).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We recently let the user know explicitly that an empty
commit message will abort the commit. However, this adds yet
another line to the template; let's rephrase and re-wrap so
that this fits back on two lines.
This patch also makes the "fatal: empty commit message?"
warning a bit less scary, since this is now a "feature"
instead of an error. However, we retain the non-zero exit
status to indicate to callers that nothing was committed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This treats aborting a commit more like a feature.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes exit()/die() calls and builtin-specific messages
from launch_editor(), so that it can be used as a general libgit.a
function to launch an editor.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit noticed that two variables were not static which should
have been, and that adding "\n\n" is better than adding '\n' twice.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves rerere()-related functions into a newly created
rerere.c file.
The setup_rerere() function is needed by both rerere() and cmd_rerere(),
so this function is moved to rerere.c and declared non-static (and "extern")
in newly created rerere.h file.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* qq/maint:
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
Conflicts:
Documentation/gitattributes.txt
When the COMMIT_EDITMSG cannot be opened, give more information to the user
by giving the 'errno' information.
Signed-off-by: Cristian Peraferrer <corellian.c@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new argument teaches Git to not look for any untracked files,
saving cycles on slow file systems, or large repos.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This lets you specify how you want untracked files to be listed.
The possible options are:
normal - Show untracked files and directories
all - Show all untracked files
The 'all' mode is used, if the mode is not specified.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
The scripted version of git-commit internally used git-commit-tree which
omitted duplicated parents given from the command line. This prevented a
nonsensical octopus merge from getting created even when you said "git
merge A B" while you are already on branch A.
However, when git-commit was rewritten in C, this sanity check was lost.
This resurrects it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding files through git commit --interactive, and 'quit'
afterwards, the message in the editor of the commit message indicates
that many (maybe all) files are deleted from the tree. Dismissing that
and running git commit afterwards does the right thing. This commit
fixes git commit --interactive to properly update the index before
commiting.
Reported by Jiří Paleček through
http://bugs.debian.org/480429
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/add-unreadable:
Add a config option to ignore errors for git-add
Add a test for git-add --ignore-errors
Add --ignore-errors to git-add to allow it to skip files with read errors
Extend interface of add_files_to_cache to allow ignore indexing errors
Make the exit code of add_file_to_index actually useful
* sb/committer:
commit: Show committer if automatic
commit: Show author if different from committer
Preparation to call determine_author_info from prepare_to_commit
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the programs which used the function (as add_file_to_cache).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
wt-status.h: declare global variables as extern
builtin-commit.c: add -u as short name for --untracked-files
git-repack: re-enable parsing of -n command line option
* maint-1.5.4:
wt-status.h: declare global variables as extern
builtin-commit.c: add -u as short name for --untracked-files
git-repack: re-enable parsing of -n command line option
This makes the C code consistent with the documentation and the old shell
code.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit sequence used to do
if (file_exists(p->path))
add_file_to_cache(p->path, 0);
where both "file_exists()" and "add_file_to_cache()" needed to do a
lstat() on the path to do their work.
This cuts down 'lstat()' calls for the partial commit case by two
for each path we know about (because we do this twice per path).
Just move the lstat() to the caller instead (that's all that
"file_exists()" really does), and pass the stat information down to the
add_to_cache() function.
This essentially makes 'add_to_index()' the core function that adds a path
to the index, getting the index pointer, the pathname and the stat
information as arguments. There are then shorthand helper functions that
use this core function:
- 'add_to_cache()' is just 'add_to_index()' with the default index
- 'add_file_to_cache/index()' is the same, but does the lstat() call
itself, so you can pass just the pathname if you don't already have the
stat information available.
So old users of the 'add_file_to_xyzzy()' are essentially left unchanged,
and this just exposes the more generic helper function that can take
existing stat information into account.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To warn the user in case he/she might be using an unintended
committer identity.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That would help reassure anybody while committing other's changes.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder functions definitions such that determine_author_info is
defined before prepare_to_commit. No code changes.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
git-submodule: Avoid 'fatal: cannot describe' message
Force the medium pretty format on calls to git log
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
Its documentation was removed by 6c96753 (Documentation/git-commit: rewrite
to make it more end-user friendly, 2006-12-08), even though it is referenced
from a few places, including builtin-commit.c (as part of the commentary in
the commit message template).
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attached patch introduces a single bit "use_terminator" in "struct
rev_info", which is normally false (i.e. most formats use separator
semantics) but by flipping it to true, you can ask for terminator
semantics just like oneline format does.
The function get_commit_format(), which is what parses "--pretty=" option,
now takes a pointer to "struct rev_info" and updates its commit_format and
use_terminator fields. It used to return the value of type "enum
cmit_fmt", but all the callers assigned it to rev->commit_format.
There are only two cases the code turns use_terminator on. Obviously, the
traditional oneline format (--pretty=oneline) is one of them, and the new
case is --pretty=tformat:... that acts like --pretty=format:... but flips
the bit on.
With this, "--pretty=tformat:%H %s" acts like --pretty=oneline.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will always unpack into our own internal index, but we will take the
source from wherever specified, and we will optionally write the result
to a specified index (optionally, because not everybody even _wants_ any
result: the index diffing really wants to just walk the tree and index
in parallel).
This ends up removing a fair number more lines than it adds, for the
simple reason that we can now skip all the crud that tried to be
oh-so-careful about maintaining our position in the index as we were
traversing and modifying it. Since we don't actually modify the source
index any more, we can just update the 'o->pos' pointer without worrying
about whether an index entry got removed or replaced or added to.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a very mechanical conversion, and makes everybody set it to
'&the_index' before calling, but at least it makes it more explicit
where we work with the index.
The next stage would be to split that index usage up into a 'source' and
a 'destination' index, so that we can unpack into a different index than
we started out from.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
* pb/prepare-commit-msg:
git-commit: add a prepare-commit-msg hook
git-commit: Refactor creation of log message.
git-commit: set GIT_EDITOR=: if editor will not be launched
git-commit: support variable number of hook arguments
* maint:
commit: discard index after setting up partial commit
filter-branch: handle filenames that need quoting
diff: Fix miscounting of --check output
hg-to-git: fix parent analysis
mailinfo: feed only one line to handle_filter() for QP input
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Add "const" qualifier to "char *excludes_file".
Add "const" qualifier to "char *editor_program".
Add "const" qualifier to "char *pager_program".
config: add 'git_config_string' to refactor string config variables.
diff.c: remove useless check for value != NULL
fast-import: check return value from unpack_entry()
Validate nicknames of remote branches to prohibit confusing ones
diff.c: replace a 'strdup' with 'xstrdup'.
diff.c: fixup garding of config parser from value=NULL
There may still be some entries from the original index that
should be discarded before we show the status. In
particular, if a file was added in the index but not
included in the partial commit, it would still show up in
the status listing as staged for commit.
Ultimately the correct fix is to keep the two states in
separate index_state variables. Then we can avoid having
to reload the cache from the temporary file altogether, and
just point wt_status_print at the correct index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/in-core-index:
lazy index hashing
Create pathname-based hash-table lookup into index
read-cache.c: introduce is_racy_timestamp() helper
read-cache.c: fix a couple more CE_REMOVE conversion
Also use unpack_trees() in do_diff_cache()
Make run_diff_index() use unpack_trees(), not read_tree()
Avoid running lstat(2) on the same cache entry.
index: be careful when handling long names
Make on-disk index representation separate from in-core one
After doing a merge --squash, and commit afterwards, the commit message
template SQUASH_MSG in the git directory is not removed, which means that
the content of SQUASH_MSG is used as default commit message for all
subsequent commits. So have git commit remove the file SQUASH_MSG from
the git directory upon a successful commit.
The problem was discovered by Frédéric Brière, reported through
http://bugs.debian.org/464656
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return an error from unpack_trees() instead of calling die(), and exit
with an error in read-tree, builtin-commit, and diff-lib. merge-recursive
already expected an error return from unpack_trees, so it doesn't need to
be changed. The merge function can return negative to abort.
This will be used in builtin-checkout -m.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
The prepare-commit-msg hook is run whenever a "fresh" commit message
is prepared, just before it is shown in the editor (if it is).
Its purpose is to modify the commit message in-place.
It takes one to three parameters. The first is the name of the file that
the commit log message. The second is the source of the commit message,
and can be: "message" (if a -m or -F option was given); "template" (if a
-t option was given or the configuration option commit.template is set);
"merge" (if the commit is a merge or a .git/MERGE_MSG file exists);
"squash" (if a .git/SQUASH_MSG file exists); or "commit", followed by
a commit SHA1 as the third parameter (if a -c, -C or --amend option
was given).
If its exit status is non-zero, git-commit will abort. The hook is
not suppressed by the --no-verify option, so it should not be used
as a replacement for the pre-commit hook.
The sample prepare-commit-msg comments out the `Conflicts:` part of
a merge's commit message; other examples are commented out, including
adding a Signed-off-by line at the bottom of the commit messsage,
that the user can then edit or discard altogether.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves the code of run_commit, up to writing the trees, editing
the message and running the commit-msg hook to prepare_log_message. It also
renames the latter to prepare_to_commit.
This simplifies a little the code for the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparatory patch that provides a simple way for the future
prepare-commit-msg hook to discover if the editor will be launched.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version might not have handled this correctly
either, but the version rewritten in C definitely does not grok
this and complains $tag is not a commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In certain rare cases, the creation of the commit object
and update of HEAD can succeed, but then installing the
updated index will fail. This is most likely caused by a
full disk or exceeded disk quota. When this happens the
new index file will be removed, and the repository will
be left with the original now-out-of-sync index. The
user can recover with a "git reset HEAD" once the disk
space issue is resolved.
We should detect this failure and offer the user some
helpful guidance.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts the index explicitly on read and write to its on-disk
format, allowing the in-core format to contain more flags, and be
simpler.
In particular, the in-core format is now host-endian (as opposed to the
on-disk one that is network endian in order to be able to be shared
across machines) and as a result we can dispense with all the
htonl/ntohl on accesses to the cache_entry fields.
This will make it easier to make use of various temporary flags that do
not exist in the on-disk format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When creating the commit object, be a whole lot more careful about making
sure that the parent lines really are valid parent lines. Check things
like MERGE_HEAD having proper SHA1 lines in it, and double-check that all
the parents exist and are actually commits.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to prepare index files for the temporary and next
index file was closing file descriptor it obtained from the
lockfile API by hand, without letting the API know that the fd
should not be doubly closed.
This is not usually a problem (except it may get EBADFD) but if
we opened another fd for an entirely unrelated purpose (say, an
fd used to mmap a packfile) between the time we close the fd to
the index file and the time we commit or rollback the lockfile
(causing it to also try closing the recorded fd), the lockfile
API will close an incorrect file descriptor that is still used
for an entirely unrelated purpose.
There's four close(fd) calls in prepare_index() and they're all
incorrect. The open fd's are cleaned up in rollback_index_files() and
shouldn't be closed manually. The patch below gets rid of the extra
close() calls and should fix the problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 16335fdd7a.
We are calling overlay_tree_on_cache() which does use CE_UPDATE
flag to mark duplicated entries, which is the same as the
codepath in git-ls-files with its --with-tree option.
Because the pathname ce->name is given to path_list_insert()
which does not allow duplicates, there is no breakage either way
from the correctness point of view in this codepath, unlike the
one in ls-files. But avoiding unnecessary processing with a
single bit check is certainly better.
2888605c64 (builtin-commit: fix
partial-commit support) mindlessly cut and pasted from
builtin-ls-files.c, and included a part that was meant to
exclude redundant path after "ls-files --with-tree" overlayed
the HEAD commit on top of the index. This logic does not apply
to what git-commit does and should not have been copied, even
though it would not hurt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git commit paths" to create a partial commit, we
used to carefully build the temporary index so that we do not
lose the cached stat information. The rewrite of the command in
C lost it by carelessly using read_tree().
This resurrects the earlier behaviour to keep the cached stat
information as much as possible by using one-tree merge logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although we traditionally stripped away excess blank lines, trailing
whitespaces and lines that begin with "#" from the commit log message,
sometimes the message just has to be the way user wants it.
For instance, a commit message template can contain lines that begin with
"#", the message must be kept as close to its original source as possible
if you are converting from a foreign SCM, or maybe the message has a shell
script including its comments for future reference.
The cleanup modes are default, verbatim, whitespace and strip. The
default mode depends on if the message is being edited and will either
strip whitespace and comments (if editor active) or just strip the
whitespace (for where the message is given explicitely).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag no_edit meant "we have got final message from the user
and will not editing it any further", but there were quite a few
places that needed to check !no_edit. Rename the variable to
use_editor and reverse the logic everywhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When amending initial commit without editor, the command
incorrectly barfed because the check to see if there is anything
to commit referenced the non-existent HEAD^1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prepare_log_message() function serves two purposes:
- Prepares the commit log message template, to be given to the end
user;
- Return true if there is something committable;
7168624c35 (Do not generate full commit
log message if it is not going to be used) cheated to omit the former
when we know the log message template is not going to be used. However,
its replacement logic to see if there is something committable was
botched. When amending, it should compare the index with the parent of
the HEAD, not the current HEAD. Otherwise you cannot run --amend to
fix only the message without changing the tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables -B -M to the summary output after a commit is made so that
it is in line with what is shown in git-status and commit log template.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because print_summary() forgot to call diff_setup_done() after futzing with
diff output options, it failed to activate recursive diff, which resulted in
an incorrect summary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After tentatively applying a patch from a contributor, you can get a
replacement patch with corrected code and unusable commit log message.
In such a case, this sequence ought to give you an editor based on the
message in the earlier commit, to let you describe an incremental
improvement:
git reset --hard HEAD^ ;# discard the earlier one
git am <corrected-patch
git commit --amend -c HEAD@{1}
Unfortunately, --amend insisted reusing the message from the commit
being amended, ignoring the -c option. This corrects it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When recording a merge that conflicted and ends up in no changes after
manual resolution, commit callchain looked like this:
cmd_commit() ->
prepare_log_message() ->
run_status() ->
wt_status_print()
This invocation of run_status() is asked to find out if there is a
committable change, but it unconditionally gave instructions such as
"use git-add" at the same time. When in merge, we do allow an empty
change to be recorded, so after showing this message the code still went
ahead and made a commit.
This introduces "nowarn" parameter to run_status() to avoid these
useless messages. If we are not allowed to create an empty commit, we
already call run_status() again in the original codepath, and the
message will be shown from that call anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version relied on the nice "auto-strip the terminating LF"
behaviour shell gives to "var=$(cmd)" construct, but we have to roll
that ourselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier fix to the said commit was incomplete; it mixed up the
meaning of the flag parameter passed to the internal fmt_ident()
function, so this corrects it.
git_author_info() and git_committer_info() can be told to issue a
warning when no usable user information is found, and optionally can be
told to error out. Operations that actually use the information to
record a new commit or a tag will still error out, but the caller to
leave reflog record will just silently use bogus user information.
Not warning on misconfigured user information while writing a reflog
entry is somewhat debatable, but it is probably nicer to the users to
silently let it pass, because the only information you are losing is who
checked out the branch.
* git_author_info() and git_committer_info() used to take 1 (positive
int) to error out with a warning on misconfiguration; this is now
signalled with a symbolic constant IDENT_ERROR_ON_NO_NAME.
* These functions used to take -1 (negative int) to warn but continue;
this is now signalled with a symbolic constant IDENT_WARN_ON_NO_NAME.
* fmt_ident() function implements the above error reporting behaviour
common to git_author_info() and git_committer_info(). A symbolic
constant IDENT_NO_DATE can be or'ed in to the flag parameter to make
it return only the "Name <email@address.xz>".
* fmt_name() is a thin wrapper around fmt_ident() that always passes
IDENT_ERROR_ON_NO_NAME and IDENT_NO_DATE.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old git-commit.sh script allowed the commit-msg hook to not only
prevent a commit from proceding, but also to edit the commit message
on the fly and allow it to proceed. So here we teach builtin-commit
to do the same.
This is based on Wincent's patch, but redone with a clarified logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the moment the --no-verify switch to "git commit" instructs it to
skip over the pre-commit hook. Here we teach "git commit --no-verify"
to skip over the commit-msg hook as well. This brings the behaviour
of builtin-commit back in line with git-commit.sh.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git-status was recently changed to output relative
paths. Setting this variable to false restores the old behavior for
any old-timers that prefer it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wc/add-i:
git-add -i: add help text for list-and-choose UI
add -i: allow prefix highlighting for "Add untracked" as well.
Highlight keyboard shortcuts in git-add--interactive
Document all help keys in "git add -i" patch mode.
Add "--patch" option to git-add--interactive
add -i: Fix running from a subdirectory
builtin-add: fix command line building to call interactive
git-add -i: allow multiple selection in patch subcommand
Add path-limiting to git-add--interactive
Teach builtin-add to pass multiple paths to git-add--interactive
It does not usually make sense to record a commit that has the exact
same tree as its sole parent commit and that is why git-commit prevents
you from making such a mistake, but when data from foreign scm is
involved, it is a different story. We are equipped to represent such an
(perhaps insane, perhaps by mistake, or perhaps done on purpose) empty
change, and it is better to represent it bypassing the safety valve for
native use.
This is primarily for use by foreign scm interface scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally, it should not be allowed to generate an empty commit. A merge
commit generated with git 'merge -s ours' does not change the tree (along
the first parent), but merges are not "empty" even if they do not change
the tree. Hence, we should be careful not to forbid this case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status shares the same usage information as git commit since it
shows what would be committed if the same options are given. However,
when displaying the usage information for git status it should say it
is for git status not git commit.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce fmt_name() specifically meant for formatting the name and
email pair, to add signed-off-by value. This reverts parts of
13208572fb (builtin-commit: fix --signoff)
so that an empty datestamp string given to fmt_ident() by mistake will
error out as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are three types of cleanups here:
1. remove newline from die message (die/report adds it
already)
2. typo: s/merger/merge/
3. the old "* no commit message? aborting commit." is now
prepended with "fatal: ", making the asterisk look a
little funny. Let's just remove it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like when it is already specified through -C, -F or -m to git-commit.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The editor program to let the user edit the log message used to
get GIT_INDEX_FILE environment variable pointing at the right
file, but this was lost when git-commit was rewritten in C.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the pathspec interactive_add() passes to the underlying
git-add--interactive helper. When the command was run from a
subdirectory, cmd_add() already has gone up to the toplevel of the work
tree, and the helper will be spawned from there. The pathspec given on
the command line from the user needs to be adjusted for this.
This adds "validate_pathspec()" function in the callchain, but it does
not validate yet. The function can be changed to barf if there are
unmatching pathspec given by the user, but that is not strictly
necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to use a few functions refactored to use in the built-in
commit series.
* kh/commit: (28 commits)
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
builtin-commit: Clean up an unused variable and a debug fprintf().
Call refresh_cache() when updating the user index for --only commits.
builtin-commit: Add newline when showing which commit was created
builtin-commit: resurrect behavior for multiple -m options
builtin-commit --s: add a newline if the last line was not a S-o-b
builtin-commit: fix --signoff
git status: show relative paths when run in a subdirectory
builtin-commit: Refresh cache after adding files.
builtin-commit: fix reflog message generation
launch_editor(): read the file, even when EDITOR=:
...
run_diff_index() and the entire diff machinery is hard coded to output
to stdout, so just redirect that and restore it when done.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
