Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
At the start of a rebase, ORIG_HEAD is updated to the tip of the
branch being rebased. Unfortunately reset_head() always uses the
current value of HEAD for this which is incorrect if the rebase is
started with "git rebase <upstream> <branch>" as in that case
ORIG_HEAD should be updated to <branch>. This only affects the "apply"
backend as the "merge" backend does not yet use reset_head() for the
initial checkout. Fix this by passing in orig_head when calling
reset_head() and add some regression tests.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
move_to_original_branch() passes the message intended for the branch
reflog as `orig_head_msg`. Fix this by adding a `branch_msg` member to
struct reset_head_opts and add a regression test. Note that these
reflog messages do not respect GIT_REFLOG_ACTION. They are not alone
in that and will be fixed in a future series.
The "merge" backend already has tests that check both the branch and
HEAD reflogs.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a confusingly large number of parameters which
makes it difficult to remember which order to pass them in. The
following commits will add a couple more parameters which makes the
problem worse. To address this change the function to take a struct of
options. Using a struct means that it is no longer necessary to
remember which order to pass the parameters in and anyone reading the
code can easily see which value is passed to each parameter.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If ORIG_HEAD is not set by passing RESET_ORIG_HEAD then there is no
need to pass anything for reflog_orig_head. In addition to the callers
fixed in this commit move_to_original_branch() also passes
reflog_orig_head without setting ORIG_HEAD. That caller is mistakenly
passing the message it wants to put in the branch reflog which is not
currently possible so we delay fixing that caller until we can pass
the message as the branch reflog.
A later commit will make it a BUG() to pass reflog_orig_head without
RESET_ORIG_HEAD, that changes cannot be done here as it needs to wait
for move_to_original_branch() to be fixed first.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default_reflog parameter of create_autostash() is passed to
reset_head(). However as creating a stash does not involve updating
any refs the parameter is not used by reset_head(). Removing the
parameter from create_autostash() simplifies the callers.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is only needed when a ref is going to be updated and
the caller does not pass an explicit reflog message. Callers that are
only discarding uncommitted changes in the working tree such as such
as "rebase --skip" or create_autostash() do not update any refs so
should not have to worry about passing this parameter.
This change is not intended to have any user visible changes. The
pointer comparison between `oid` and `&head_oid` checks that the
caller did not pass an oid to be checked out. As no callers pass
RESET_HEAD_RUN_POST_CHECKOUT_HOOK without passing an oid there are
no changes to when the post-checkout hook is run. As update_ref() only
updates the ref if the oid passed to it differs from the current ref
there are no changes to when HEAD is updated.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use of the action parameter is to setup the error messages
for unpack_trees(). All but two cases pass either "checkout" or
"reset". The case that passes "reset --hard" would be better passing
"reset" so that the error messages match the builtin reset command
like all the other callers that are doing a reset. The case that
passes "Fast-forwarded" is only updating HEAD and so the parameter is
unused in that case as it does not call unpack_trees(). The value to
pass to setup_unpack_trees_porcelain() can be determined by checking
whether flags contains RESET_HEAD_HARD without the caller having to
specify it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is heavily indented and it will be convenient later in the
series to have it in its own function.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pre-rebase hook away from run-command.h to and over to the
new hook.h library.
Since this hook needs arguments introduce a run_hooksl() wrapper, like
run_hooks(), but it takes varargs.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
"git rebase <upstream> <tag>" failed when aborted in the middle, as
it mistakenly tried to write the tag object instead of peeling it
to HEAD.
* pw/rebase-of-a-tag-fix:
rebase: dereference tags
rebase: use lookup_commit_reference_by_name()
rebase: use our standard error return value
t3407: rework rebase --quit tests
t3407: strengthen rebase --abort tests
t3407: use test_path_is_missing
t3407: rename a variable
t3407: use test_cmp_rev
t3407: use test_commit
t3407: run tests in $TEST_DIRECTORY
A rebase started with 'git rebase <A> <B>' is conceptually to first
checkout <B> and run 'git rebase <A>' starting from that state. 'git
rebase --abort' in the middle of such a rebase should take us back to
the state we checked out <B>.
This used to work, even when <B> is a tag that points at a commit,
until Git 2.20.0 when the command was reimplemented in C. The command
now complains that the tag object itself cannot be checked out, which
may be technically correct but is not what the user asked to do.
Fix this old regression by using lookup_commit_reference_by_name()
when parsing <B>. The scripted version did not need to peel the tag
because the commands it passed the tag to (e.g 'git reset') peeled the
tag themselves.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
peel_committish() appears to have been copied from the scripted rebase
but it duplicates the functionality of
lookup_commit_reference_by_name() so lets use that instead.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses −1 to signal an error. The builtin rebase converts these to
+1 all over the place using !! (presumably because the in the scripted
version an error was signalled by +1). This is confusing and clutters
the code, we only need to convert the value when the function returns.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
"git rebase" by default skips changes that are equivalent to
commits that are already in the history the branch is rebased onto;
give messages when this happens to let the users be aware of
skipped commits, and also teach them how to tell "rebase" to keep
duplicated changes.
* js/advise-when-skipping-cherry-picked:
sequencer: advise if skipping cherry-picked commit
The hard work was already done with 'git merge' and the ORT strategy.
Just add extra tests to see that we get the expected results in the
non-conflict cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before spawning the auto maintenance, we need to make sure that we
release all open file handles to all the `.pack` files (and MIDX files
and commit-graph files and...) so that the maintenance process has the
freedom to delete those files.
So far, we did this manually every time before calling
`run_auto_maintenance()`. With the new `close_object_store` flag, we can
do that implicitly in that function, which is more robust because future
callers won't be able to forget to close the object store.
Note: this changes behavior slightly, as we previously _always_ closed
the object store, but now we only close the object store when actually
running the auto maintenance. In practice, this should not matter (if
anything, it might speed up operations where auto maintenance is
disabled).
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We no longer support `--preserve-merges`, therefore it does not make
sense to keep mentioning that option, even in code comments.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we no longer have a `--preserve-merges` backend, this comment
needs to be adjusted.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was only used by the `--preserve-merges` backend, which we just
removed.
Helped-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option was deprecated in favor of `--rebase-merges` some time ago,
and now we retire it.
To assist users to transition away, we do not _actually_ remove the
option, but now we no longer implement the functionality. Instead, we
offer a helpful error message suggesting which option to use.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Silently skipping commits when rebasing with --no-reapply-cherry-picks
(currently the default behavior) can cause user confusion. Issue
warnings when this happens, as well as advice on how to preserve the
skipped commits.
These warnings and advice are displayed only when using the (default)
"merge" rebase backend.
Update the git-rebase docs to mention the warnings and advice.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `ort` instead of `recursive` as the default merge strategy.
* en/ort-becomes-the-default:
Update docs for change of default merge backend
Change default merge backend from recursive to ort
The die() routine adds a "fatal: " prefix, there is no reason to add
another one. Fixes code added in e65123a71d (builtin rebase: support
`git rebase <upstream> <switch-to>`, 2018-09-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few reasons to switch the default:
* Correctness
* Extensibility
* Performance
I'll provide some summaries about each.
=== Correctness ===
The original impetus for a new merge backend was to fix issues that were
difficult to fix within recursive's design. The success with this goal
is perhaps most easily demonstrated by running the following:
$ git grep -2 KNOWN_FAILURE t/ | grep -A 4 GIT_TEST_MERGE_ALGORITHM
$ git grep test_expect_merge_algorithm.failure.success t/
$ git grep test_expect_merge_algorithm.success.failure t/
In order, these greps show:
* Seven sets of submodule tests (10 total tests) that fail with
recursive but succeed with ort
* 22 other tests that fail with recursive, but succeed with ort
* 0 tests that pass with recursive, but fail with ort
=== Extensibility ===
Being able to perform merges without touching the working tree or index
makes it possible to create new features that were difficult with the
old backend:
* Merging, cherry-picking, rebasing, reverting in bare repositories...
or just on branches that aren't checked out.
* `git diff AUTO_MERGE` -- ability to see what changes the user has
made to resolve conflicts so far (see commit 5291828df8 ("merge-ort:
write $GIT_DIR/AUTO_MERGE whenever we hit a conflict", 2021-03-20)
* A --remerge-diff option for log/show, used to show diffs for merges
that display the difference between what an automatic merge would
have created and what was recorded in the merge. (This option will
often result in an empty diff because many merges are clean, but for
the non-clean ones it will show how conflicts were fixed including
the removal of conflict markers, and also show additional changes
made outside of conflict regions to e.g. fix semantic conflicts.)
* A --remerge-diff-only option for log/show, similar to --remerge-diff
but also showing how cherry-picks or reverts differed from what an
automatic cherry-pick or revert would provide.
The last three have been implemented already (though only one has been
submitted upstream so far; the others were waiting for performance work
to complete), and I still plan to implement the first one.
=== Performance ===
I'll quote from the summary of my final optimization for merge-ort
(while fixing the testcase name from 'no-renames' to 'few-renames'):
Timings
Infinite
merge- merge- Parallelism
recursive recursive of rename merge-ort
v2.30.0 current detection current
---------- --------- ----------- ---------
few-renames: 18.912 s 18.030 s 11.699 s 198.3 ms
mega-renames: 5964.031 s 361.281 s 203.886 s 661.8 ms
just-one-mega: 149.583 s 11.009 s 7.553 s 264.6 ms
Speedup factors
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
few-renames: 1 1.05 1.6 95
mega-renames: 1 16.5 29 9012
just-one-mega: 1 13.6 20 565
And, for partial clone users:
Factor reduction in number of objects needed
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
mega-renames: 1 1 1 181.3
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- cmd_rebase populates rebase_options.strategy with newly allocated
strings, hence we need to free those strings at the end of cmd_rebase
to avoid a leak.
- In some cases: get_replay_opts() is called, which prepares replay_opts
using data from rebase_options. We used to simply copy the pointer
from rebase_options.strategy, however that would now result in a
double-free because sequencer_remove_state() is eventually used to
free replay_opts.strategy. To avoid this we xstrdup() strategy when
adding it to replay_opts.
The original leak happens because we always populate
rebase_options.strategy, but we don't always enter the path that calls
get_replay_opts() and later sequencer_remove_state() - in other words
we'd always allocate a new string into rebase_options.strategy but
only sometimes did we free it. We now make sure that rebase_options
and replay_opts both own their own copies of strategy, and each copy
is free'd independently.
This was first seen when running t0021 with LSAN, but t2012 helped catch
the fact that we can't just free(options.strategy) at the end of
cmd_rebase (as that can cause a double-free). LSAN output from t0021:
LSAN output from t0021:
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa71eb8 in xstrdup wrapper.c:29:14
#2 0x61b1cc in cmd_rebase builtin/rebase.c:1779:22
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6b3fad in main common-main.c:52:11
#8 0x7f267b512349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 4 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
Plug various leans reported by LSAN.
* ah/plugleaks:
builtin/rm: avoid leaking pathspec and seen
builtin/rebase: release git_format_patch_opt too
builtin/for-each-ref: free filter and UNLEAK sorting.
mailinfo: also free strbuf lists when clearing mailinfo
builtin/checkout: clear pending objects after diffing
builtin/check-ignore: clear_pathspec before returning
builtin/bugreport: don't leak prefixed filename
branch: FREE_AND_NULL instead of NULL'ing real_ref
bloom: clear each bloom_key after use
ls-files: free max_prefix when done
wt-status: fix multiple small leaks
revision: free remainder of old commit list in limit_list
options.git_format_patch_opt can be populated during cmd_rebase's setup,
and will therefore leak on return. Although we could just UNLEAK all of
options, we choose to strbuf_release() the individual member, which matches
the existing pattern (where we're freeing invidual members of options).
Leak found when running t0021:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9ac296 in xrealloc wrapper.c:126:8
#2 0x93b13d in strbuf_grow strbuf.c:98:2
#3 0x93bd3a in strbuf_add strbuf.c:295:2
#4 0x60ae92 in strbuf_addstr strbuf.h:304:2
#5 0x605f17 in cmd_rebase builtin/rebase.c:1759:3
#6 0x4cd91d in run_builtin git.c:467:11
#7 0x4cb5f3 in handle_builtin git.c:719:3
#8 0x4ccf47 in run_argv git.c:808:4
#9 0x4caf49 in cmd_main git.c:939:19
#10 0x69dbfe in main common-main.c:52:11
#11 0x7f66dae91349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 24 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
Remove the rebase.useBuiltin setting and the now-obsolete
GIT_TEST_REBASE_USE_BUILTIN test flag.
This was left in place after my d03ebd411c (rebase: remove the
rebase.useBuiltin setting, 2019-03-18) to help anyone who'd used the
experimental flag and wanted to know that it was the default, or that
they should transition their test environment to use the builtin
rebase unconditionally.
It's been more than long enough for those users to get a headsup about
this. So remove all the scaffolding that was left inplace after
d03ebd411c. I'm also removing the documentation entry, if anyone
still has this left in their configuration they can do some source
archaeology to figure out what it used to do, which makes more sense
than exposing every git user reading the documentation to this legacy
configuration switch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a variety of questions users might ask while resolving
conflicts:
* What changes have been made since the previous (first) parent?
* What changes are staged?
* What is still unstaged? (or what is still conflicted?)
* What changes did I make to resolve conflicts so far?
The first three of these have simple answers:
* git diff HEAD
* git diff --cached
* git diff
There was no way to answer the final question previously. Adding one
is trivial in merge-ort, since it works by creating a tree representing
what should be written to the working copy complete with conflict
markers. Simply write that tree to .git/AUTO_MERGE, allowing users to
answer the fourth question with
* git diff AUTO_MERGE
I avoided using a name like "MERGE_AUTO", because that would be
merge-specific (much like MERGE_HEAD, REBASE_HEAD, REVERT_HEAD,
CHERRY_PICK_HEAD) and I wanted a name that didn't change depending on
which type of operation the merge was part of.
Ensure that paths which clean out other temporary operation-specific
files (e.g. CHERRY_PICK_HEAD, MERGE_MSG, rebase-merge/ state directory)
also clean out this AUTO_MERGE file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users (myself included) would prefer to have this feature off by
default because it can silently drop commits.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specifies a base commit to switch to, check if it actually
references a commit right away to avoid getting confused later on when
it turns out to be an invalid object.
Reported-by: LeSeulArtichaut <leseulartichaut@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
"git rebase -i" did not store ORIG_HEAD correctly.
* pw/rebase-i-orig-head:
rebase -i: simplify get_revision_ranges()
rebase -i: use struct object_id when writing state
rebase -i: use struct object_id rather than looking up commit
rebase -i: stop overwriting ORIG_HEAD buffer
Now that all the external users of head_hash have been converted to
use a opts->orig_head instead we can stop returning head_hash from
get_revision_ranges().
Because we want to pass the full object names back to the caller in
`revisions` the find_unique_abbrev_r() call that was used to initialize
`head_hash` is replaced with oid_to_hex().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than passing a string around pass the struct object_id that the
string was created from call oid_hex() when we write the file.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a struct object_id containing the oid that we want to
set ORIG_HEAD to so use that rather than converting it to a string and
then calling get_oid() on that string.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jean-Noël Avila
Phillip Wood
Emily Shaffer
Derrick Stolee
Johannes Schindelin
Josh Steadmon
Ævar Arnfjörð Bjarmason
Elijah Newren
Andrzej Hunt
brian m. carlson
Alex Henrie
René Scharfe