If non UTF-8 characters are detected in paths then replace them with
a placeholder instead of throwing a UnicodeDecodeError
exception. This restores the original (implicit) implementation that
was broken in 00a9403.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a path with non-ASCII characters is detected then print the
encoding and the encoded string in verbose mode.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce keeps the encoding of a path as given by the originating OS.
Git expects paths encoded as UTF-8. Add a config to tell git-p4 what
encoding Perforce had used for the paths. This encoding is used to
transcode the paths to UTF-8. As an example, Perforce on Windows often
uses “cp1252” to encode path names.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --detect-labels enabled, git-p4 will try to create tags
using git fast-import by writing a "tag" clause to the
fast-import stream.
If the commit that the tag references has not yet actually
been processed by fast-import, then the tag can't be created
and git-p4 fails to import the P4 label.
Teach git-p4 to use fast-import "marks" when creating tags
which reference commits created during the current run of the
program.
Commits created before the current run are still referenced
in the old way using a normal git commit.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If p4 reports a tag for a commit that git-p4 does not know
about (e.g. because it references a P4 changelist that was
imported prior to the point at which the repo was cloned into
git), make sure that the error is correctly caught and handled.
rather than just crashing.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce depot may record paths in mixed cases, e.g. "p4 files" may
show that there are these two paths:
//depot/Path/to/file1
//depot/pATH/to/file2
and with "p4" or "p4v", these end up in the same directory, e.g.
//depot/Path/to/file1
//depot/Path/to/file2
which is the desired outcome on case insensitive systems.
If git-p4 is used with client spec "//depot/Path/...", however, then
all files not matching the case in the client spec are ignored (in
the example above "//depot/pATH/to/file2").
Fix this by using the path case that appears first in lexicographical
order when core.ignorecase is set to true. This behavior is consistent
with "p4" and "p4v".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More Perforce row number limit workaround for "git p4".
* ld/p4-changes-block-size:
git-p4: fixing --changes-block-size handling
git-p4: add tests for non-numeric revision range
git-p4: test with limited p4 server results
git-p4: additional testing of --changes-block-size
The --changes-block-size handling was intended to help when
a user has a limited "maxscanrows" (see "p4 group"). It used
"p4 changes -m $maxchanges" to limit the number of results.
Unfortunately, it turns out that the "maxscanrows" and "maxresults"
limits are actually applied *before* the "-m maxchanges" parameter
is considered (experimentally).
Fix the block-size handling so that it gets blocks of changes
limited by revision number ($Start..$Start+$N, etc). This limits
the number of results early enough that both sets of tests pass.
Note that many other Perforce operations can fail for the same
reason (p4 print, p4 files, etc) and it's probably not possible
to workaround this. In the real world, this is probably not
usually a problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "$EDITOR" and "$GIT_EDITOR" that can hold the path to the
command and initial options (e.g. "/path/to/emacs -nw"), 'git p4'
did not let the shell interpolate the contents of the environment
variable that name the editor "$P4EDITOR" (and "$EDITOR", too).
Make it in line with the rest of Git, as well as with Perforce.
* ld/p4-editor-multi-words:
git-p4: tests: use test-chmtime in place of touch
git-p4: fix handling of multi-word P4EDITOR
git-p4: add failing test for P4EDITOR handling
Fixing bug with UTF-16 files when they are retrieved by git-p4. It
was always getting the tip version of the file and the history of
the file was lost.
Signed-off-by: Miguel Torroja <miguel.torroja@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-p4 to pass the P4EDITOR variable to the
shell for expansion, so that any command-line arguments are
correctly handled. Without this, git-p4 can only launch the
editor if P4EDITOR is solely the path to the binary, without
any arguments.
This also adjusts t9805, which relied on the previous behaviour.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git p4 attempts to better handle branches in Perforce.
* va/p4-client-path:
git-p4: improve client path detection when branches are used
t9801: check git-p4's branch detection with client spec enabled
"git p4" learned "--changes-block-size <n>" to read the changes in
chunks from Perforce, instead of making one call to "p4 changes"
that may trigger "too many rows scanned" error from Perforce.
* ls/p4-changes-block-size:
git-p4: use -m when running p4 changes
Perforce allows client side file/directory remapping through
the use of the client view definition that is part of the
user's client spec.
To support this functionality while branch detection is
enabled it is important to determine the branch location in
the workspace such that the correct files are patched before
Perforce submission. Perforce provides a command that
facilitates this process: p4 where.
This patch does two things to fix improve file location
detection when git-p4 has branch detection and use of client
spec enabled:
1. Enable usage of "p4 where" when Perforce branches exist
in the git repository, even when client specification is
used. This makes use of the already existing function
p4Where.
2. Allow identifying partial matches of the branch's depot
path while processing the output of "p4 where". For
robustness, paths will only match if ending in "/...".
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply running "p4 changes" on a large branch can result in a "too
many rows scanned" error from the Perforce server. It is better to
use a sequence of smaller calls to "p4 changes", using the "-m"
option to limit the size of each call.
Signed-off-by: Lex Spoon <lex@lexspoon.org>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a Perforce server is configured to automatically set +l
(exclusive lock) on add of certain file types, git p4 submit will
fail during getP4OpenedType, as the regex doesn't expect the
trailing '*exclusive*' from p4 opened:
//depot/file.png#1 - add default change (binary+l) *exclusive*
Signed-off-by: Blair Holloway <blair_holloway@playstation.sony.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clone subcommand has long had support for excluding
subdirectories, but sync has not. This is a nuisance,
since as soon as you do a sync, any changed files that
were initially excluded start showing up.
Move the "exclude" command-line option into the parent
class; the actual behavior was already present there so
it simply had to be exposed.
Signed-off-by: Luke Diamand <luke@diamand.org>
Reviewed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use git-p4 with the "--prepare-p4-only" option, then
it prints the p4 command line to use. However, the command
line was incorrect: the changelist specification must be
supplied on standard input, not as an argument to p4.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b4073bb3 (git-p4: Do not include diff in spec file when just
preparing p4, 2014-05-24) broke git p4 submit, here is a proper
fix, including proper handling for windows end of lines.
Signed-off-by: Maxime Coste <frrrwww@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff information render the spec file unusable as is by p4,
do not include it when run with --prepare-p4-only so that the
given file can be directly passed to p4.
With --prepare-p4-only, git-p4 already tells the user it can use
p4 submit with the generated spec file. This fails because of the
diff being present in the file. Not including the diff fixes that.
Without --prepare-p4-only, keeping the diff makes sense for a
quick review of the patch before submitting it. And does not cause
problems with p4 as we remove it programmatically.
Signed-off-by: Maxime Coste <frrrwww@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes a regression in 1.9.0 with an obviously correct single-liner.
* cl/p4-use-diff-tree:
git-p4: format-patch to diff-tree change breaks binary patches
When applying binary patches a full index is required. format-patch
already handles this, but diff-tree needs '--full-index' argument
to always output full index. When git-p4 runs git-apply to test
the patch, git-apply rejects the patch due to abbreviated blob
object names. This is the error message git-apply emits in this
case:
error: cannot apply binary patch to '<filename>' without full index line
error: <filename>: patch does not apply
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git p4 rebase' fails with the following message if there is a file
named HEAD in the current directory:
fatal: ambiguous argument 'HEAD': both revision and filename
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Take the suggestion above and explicitly state that HEAD should be
treated as a revision.
Signed-off-by: Vlad Dogaru <vdogaru@ixiacom.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "p4 where" fails, for whatever reason, the error message tries to
show an undefined variable. This minor bug applies only when using a
client spec, and was introduced recently in 9d57c4a (git p4: implement
view spec wildcards with "p4 where", 2013-08-30).
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9d7d446 (git p4: submit files with wildcards, 2012-04-29)
fixed problems with handling files that had p4 wildcard
characters, like "@" and "*". But it missed one case, that of
RCS keyword scrubbing, which uses "p4 fstat" to extract type
information. Fix it by calling wildcard_encode() on the raw
filename.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating the submit template for p4 uses tempfile.mkstemp(),
which by default puts files in /tmp. For a test that fails,
possibly on purpose, this is not cleaned up. Run with TMPDIR
pointing into the trash directory so the temp files go away
with the test results.
To do this required some other minor changes. First, the editor
is launched using system(editor + " " + template_file), using
shell expansion to build the command string. This doesn't work
if editor has a space in it. And is generally unwise as it's
easy to fool the shell into doing extra work. Exec the args
directly, without shell expansion.
Second, without shell expansion, the trick of "P4EDITOR=:" used
in the tests doesn't work. Use a real command, true, as the
non-interactive editor for testing.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Damien Gérard highlights an interesting problem. Some p4
repositories end up with symlinks that have an empty target. It
is not possible to create this with current p4, but they do
indeed exist.
The effect in git p4 is that "p4 print" on the symlink returns an
empty string, confusing the curret symlink-handling code.
Such broken repositories cause problems in p4 as well, even with
no git involved. In p4, syncing to a change that includes a
bogus symlink causes errors:
//depot/empty-symlink - updating /home/me/p4/empty-symlink
rename: /home/me/p4/empty-symlink: No such file or directory
and leaves no symlink.
In git, replicate the p4 behavior by ignoring these bad symlinks.
If, in a later p4 revision, the symlink happens to point to
something non-null, the symlink will be replaced properly.
Add a big test for all this too.
This happens to be a regression introduced by 1292df1 (git-p4:
Fix occasional truncation of symlink contents., 2013-08-08) and
appeared first in 1.8.5. But it shows up only in p4 repositories
of dubious character, so can wait for a proper release.
Tested-by: Damien Gérard <damien@iwi.me>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git format-patch can vary with user preferences. In
particular setting diff.noprefix will break the "git apply" that
is done as part of "git p4 submit".
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Crestez Dan Leonard <cdleonard@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" does not support many of the view wildcards, such as * and
%%n. It only knows the common ... mapping, and exclusions.
Redo the entire wildcard code around the idea of directly querying
the p4 server for the mapping. For each commit, invoke "p4 where"
with committed file paths as args and use the client mapping to
decide where the file goes in git.
This simplifies a lot of code, and adds support for all wildcards
supported by p4. Downside is that there is probably a 20%-ish
slowdown with this approach.
[pw: redo code and tests]
Signed-off-by: Kazuki Saitoh <ksaitoh560@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Symlink contents in p4 print sometimes have a trailing
new line character, but sometimes it doesn't. git-p4
should only remove the last character if that character
is '\n'.
Signed-off-by: Alex Juncu <ajuncu@ixiacom.com>
Signed-off-by: Alex Badea <abadea@ixiacom.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The generic chdir() helper sets the PWD environment
variable, as that is what is used by p4 to know its
current working directory. Normally the shell would
do this, but in git-p4, we must do it by hand.
However, when the path contains a symbolic link,
os.getcwd() will return the physical location. If the
p4 client specification includes symlinks, setting PWD
to the physical location causes p4 to think it is not
inside the client workspace. It complains, e.g.
Path /vol/bar/projects/foo/... is not under client root /p/foo
One workaround is to use AltRoots in the p4 client specification,
but it is cleaner to handle it directly in git-p4.
Other uses of chdir still require setting PWD to an
absolute path so p4 features like P4CONFIG work. See
bf1d68f (git-p4: use absolute directory for PWD env
var, 2011-12-09).
[ pw: tweak patch and commit message ]
Thanks-to: John Keeping <john@keeping.me.uk>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve "git p4" on Cygwin.
* pw/git-p4-on-cygwin: (21 commits)
git p4: introduce gitConfigBool
git p4: avoid shell when calling git config
git p4: avoid shell when invoking git config --get-all
git p4: avoid shell when invoking git rev-list
git p4: avoid shell when mapping users
git p4: disable read-only attribute before deleting
git p4 test: use test_chmod for cygwin
git p4: cygwin p4 client does not mark read-only
git p4 test: avoid wildcard * in windows
git p4 test: use LineEnd unix in windows tests too
git p4 test: newline handling
git p4: scrub crlf for utf16 files on windows
git p4: remove unreachable windows \r\n conversion code
git p4 test: translate windows paths for cygwin
git p4 test: start p4d inside its db dir
git p4 test: use client_view in t9806
git p4 test: avoid loop in client_view
git p4 test: use client_view to build the initial client
git p4: generate better error message for bad depot path
git p4: remove unused imports
...
With small updates to remove dependency on newer features of
Python, keep git-p4 usable with older Python.
* bc/git-p4-for-python-2.4:
INSTALL: git-p4 does not support Python 3
git-p4.py: support Python 2.4
git-p4.py: support Python 2.5
Make the intent of "--bool" more obvious by returning a direct True
or False value. Convert a couple non-bool users with obvious bool
intent.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invoke git rev-list directly, avoiding the shell, in
P4Submit and P4Sync. The overhead of starting extra
processes is significant in cygwin; this speeds things
up on that platform.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extra quoting and double-% are unneeded, just to work
around the shell. Instead, avoid the shell indirection.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On windows, p4 marks un-edited files as read-only. Not only are
they read-only, but also they cannot be deleted. Remove the
read-only attribute before deleting in both the copy and rename
cases.
This also happens in the RCS cleanup code, where a file is marked
to be deleted, but must first be edited to remove adjust the
keyword lines. Make sure it is editable before patching.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Files of type utf16 are handled with "p4 print" instead of the
normal "p4 -G print" interface due to how the latter does not
produce correct output. See 55aa571 (git-p4: handle utf16
filetype properly, 2011-09-17) for details.
On windows, though, "p4 print" can not be told which line
endings to use, as there is no underlying client, and always
chooses crlf, even for utf16 files. Convert the \r\n into \n
when importing utf16 files.
The fix for this is complex, in that the problem is a property
of the NT version of p4. There are old versions of p4 that
were compiled directly for cygwin that should not be subjected
to text replacement. The right check here, then, is to look
at the p4 version, not the OS version. Note also that on cygwin,
platform.system() is "CYGWIN_NT-5.1" or similar, not "Windows".
Add a function to memoize the p4 version string and use it to
check for "/NT", indicating the Windows build of p4.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replacing \r\n with \n on windows was added in c1f9197 (Replace
\r\n with \n when importing from p4 on Windows, 2007-05-24), to
work around an oddity with "p4 print" on windows. Text files
are printed with "\r\r\n" endings, regardless of whether they
were created on unix or windows, and regardless of the client
LineEnd setting.
As of d2c6dd3 (use p4CmdList() to get file contents in Python
dicts. This is more robust., 2007-05-23), git-p4 uses "p4 -G
print", which generates files in a raw format. As the native
line ending format if p4 is \n, there will be no \r\n in the
raw text.
Actually, it is possible to generate a text file so that the
p4 representation includes embedded \r\n, even though this is not
normal on either windows or unix. In that case the code would
have mistakenly stripped them out, but now they will be left
intact.
More information on how p4 deals with line endings is here:
http://kb.perforce.com/article/63
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depot paths must start with //. Exit with a better explanation
when a bad depot path is supplied.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found by "pyflakes" checker tool.
Modules shelve, getopt were unused.
Module os.path is exported by os.
Reformat one-per-line as is PEP008 suggested style.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fed2369 (git-p4: Search for parent commit on branch creation,
2012-01-25) uses temporary branches to help find the parent of a
new p4 branch. The temp branches are of the form "git-p4-tmp/%d"
for some p4 change number. Mistakenly, this string was made
using os.path.join() instead of just string concatenation. On
windows, this turns into a backslash (\), which is not allowed in
git branch names.
Reported-by: Casey McGinty <casey.mcginty@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.4 lacks the following features:
subprocess.check_call
struct.pack_into
Take a cue from 460d1026 and provide an implementation of the
CalledProcessError exception. Then replace the calls to
subproccess.check_call with calls to subprocess.call that check the return
status and raise a CalledProcessError exception if necessary.
The struct.pack_into in t/9802 can be converted into a single struct.pack
call which is available in Python 2.4.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.5 and older do not accept None as the first argument to
translate() and complain with:
TypeError: expected a character buffer object
As suggested by Pete Wyckoff, let's just replace the call to translate()
with a regex search which should be more clear and more portable.
This allows git-p4 to be used with Python 2.5.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It finds its upstream and applies the commit properly, but
the sync step will fail unless it is told which branch to
work on.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is legal to sync a branch with a different name than
refs/remotes/p4/master, and to do so even when master does
not exist.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --branch was used to build a repository with no
refs/remotes/p4/master, future syncs will not know
which branch to sync. Notice this situation and
print a helpful error message.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was set in a couple of places, both of which were very
far away from its use. Move it a bit closer to importChanges(),
and add some comments.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a clone or sync, --branch says where the newly imported
branch should go, or which existing branch to sync up. It
takes an argument, which is currently either something that
starts with "refs/", or if not, "refs/heads/p4" is prepended.
Putting it in heads seems like a bad default; these should
go in remotes/p4/ in most situations. Make that the new default,
and be more liberal in the form of the branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --branch argument to "git p4 clone", one
might specify a destination for p4 changes different from
the default refs/remotes/p4/master. Both cases should
create a master branch and checkout files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is code to create a symbolic reference from p4/HEAD to
p4/master. This allows saying "git show p4" as a shortcut
to "git show p4/master", for example.
But this reference was only created on the second "git p4 sync"
(or first sync after a clone). Make it work on the initial
clone or sync.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is four lines of code used in only one place. Simplify by
including it where it is used.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error messages that arise during the "p4 print" phase of
generating commits were silently ignored. Catch them,
abort the fast-import, and exit.
Without this fix, the sync/clone appears to work, but files that
are inaccessible by the p4d server will still be imported to git,
although without the proper contents. Instead the errant files
will contain a p4 error message, such as "Librarian checkout
//depot/path failed".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the "p4 move" command was added in 8e9497c (git p4:
add support for 'p4 move' in P4Submit, 2012-07-12), which checks
to make sure that the client and server support the command.
But older versions of p4d may not handle the "-k" argument, and
newer p4d allow disabling "p4 move" with a configuration setting.
Check for both these cases by testing a p4 move command on bogus
filenames and looking for strings in the error messages.
Reported-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Group the two calls to "p4 describe" into a new helper function,
and try to validate the p4 results. The current behavior when p4
describe fails is to die with a python backtrace. The new behavior
will print the full response.
This does not solve any particular problem, but adds more
checking in hopes of narrowing down odd behavior seen on
at least two occasions.
Based-on-patch-by: Matt Arsenault <arsenm2@gmail.com>
Reported-by: Arthur <a.foulon@amesys.fr>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This bug was introduced in cb585a9 (git-p4: keyword
flattening fixes, 2011-10-16). The newline character
is indeed special, and $File$ expansions should not try
to match across multiple lines.
Based-on-patch-by: Chris Goard <cgoard@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Jeff King <peff@peff.net>
Add '--conflict' option to git-p4 subcommand to specify what action
to take when conflicts are found during 'p4 submit'.
* pw/p4-submit-conflicts:
git-p4: add submit --conflict option and config varaiable
git p4: add submit --prepare-p4-only option
git p4: add submit --dry-run option
git p4: accept -v for --verbose
git p4: revert deleted files after submit cancel
git p4: rearrange submit template construction
git p4: test clean-up after failed submit, fix added files
git p4: standardize submit cancel due to unchanged template
git p4: move conflict prompt into run, add [q]uit input
git p4: remove submit failure options [a]pply and [w]rite
git p4: gracefully fail if some commits could not be applied
git p4 test: remove bash-ism of combined export/assignment
This allows specifying what to do when a conflict
happens when applying a commit to p4, automating the
interactive prompt.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option can be used to prepare the client workspace for
submission, only. It does not invoke the final "p4 submit".
A message describes how to proceed, either submitting the
changes or reverting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option, "git p4 submit --dry-run" can be used to verify
what commits and labels would be moved into p4.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short form "-v" is common in many git commands as an
alias for "--verbose".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can decide not to continue with a submission,
by not saving the p4 submit template, then answering "no" to
the "Submit anyway?" prompt. In this case, be sure to
return the p4 client to its initial state.
Deleted files were not reverted; fix this and test all cases.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put all items in order as they appear, and add comments.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test a variety of cases where a patch failed to apply to
p4 and had to be cleaned up.
If the patch failed to apply cleanly, do not try to remove
to-be-added files, as they have not really been added yet.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When editing the submit template, if no change was made to it,
git p4 offers a prompt "Submit anyway?". Answering "no" cancels
the submit.
Previously, a "no" answer behaves like a "[s]kip" answer to the
failed-patch prompt, in that it proceeded to try to apply the
rest of the commits. Instead, put users back into the new
"[s]kip / [c]ontinue" loop so that they can decide. This makes
both cases of patch failure behave identically.
The return code of git p4 after a "no" answer is now the same
as that for a "skip" due to failed patch; update a test to
understand this.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a commit to the p4 workspace fails, a prompt
asks what to do next. This belongs up in run() instead
of in applyCommit(), where run() can notice, for instance,
that the prompt is unnecessary because this is the last commit.
Offer two options about how to continue at conflict: [s]kip or
[q]uit. Having an explicit "quit" option gives git p4 a chance
to clean up, show the applied-commit summary, and do tag export.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a patch failed to apply, these interactive options offered
to:
1) apply the patch anyway, leaving reject (.rej) files around, or,
2) write the patch to a file (patch.txt)
In both cases it suggested to invoke "git p4 submit --continue",
an unimplemented option.
While manually fixing the rejects and submitting the result might
work, there are many steps that must be done to the job properly:
* apply patch
* invoke p4 add and delete
* change executable bits
* p4 sync -f renamed/copied files
* extract commit message into p4 change description and
move Jobs lines out of description section
* set changelist owner for --preserve-user
Plus the following manual sync/rebase will cause conflicts too,
which must be resolved once again.
Drop these workflows. Instead users should do a sync/rebase in
git, fix the conflicts there, and do a clean "git p4 submit".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit fails to apply cleanly to the p4 tree, an interactive
prompt asks what to do next. In all cases (skip, apply, write),
the behavior after the prompt had a few problems.
Change it so that it does not claim erroneously that all commits
were applied. Instead list the set of the patches under
consideration, and mark with an asterisk those that were
applied successfully. Like this example:
Applying 592f1f9 line5 in file1 will conflict
...
Unfortunately applying the change failed!
What do you want to do?
[s]kip this patch / [a]pply the patch forcibly and with .rej files / [w]rite the patch to a file (patch.txt) s
Skipping! Good luck with the next patches...
//depot/file1#4 - was edit, reverted
Applying b8db1c6 okay_commit_after_skip
...
Change 6 submitted.
Applied only the commits marked with '*':
592f1f9 line5 in file1 will conflict
* b8db1c6 okay_commit_after_skip
Do not try to sync and rebase unless all patches were applied.
If there was a conflict during the submit, there is sure to be one
at the rebase. Let the user to do the sync and rebase manually.
This changes how a couple tets in t9810-git-p4-rcs.sh behave:
- git p4 now does not leave files open and edited in the
client
- If a git commit contains a change to a file that was
deleted in p4, the test used to check that the sync/rebase
loop happened after the failure to apply the change. Since
now sync/rebase does not happen after failure, do not test
this. Normal rebase machinery, outside of git p4, will let
rebase --skip work.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bug report in http://stackoverflow.com/questions/11893688
observes that files are mapped into the wrong locations in
git when both --use-client-spec and --branch-detection are enabled.
Fix this by changing the relative path prefix to match discovered
branches when using a client spec.
The problem was likely introduced with ecb7cf9 (git-p4: rewrite view
handling, 2012-01-02).
Signed-off-by: Pete Wyckoff <pw@padd.com>
Tested-by: Matthew Korich <matthew@korich.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having to remember to do it after each call to
stripRepoPath, make it part of that function.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This instance variable is needed during commit() to map
files from p4 to their relative locations in git. Set
it when initializing P4Sync to avoid passing it to every
commit() call.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For -M option (detectRenames) in P4Submit, use 'p4 move' rather
than 'p4 integrate'. Check Perforce server for exisitence of
'p4 move' and use it if present, otherwise revert to 'p4 integrate'.
[pw: wildcard-encode src/dest, add/update tests, tweak code]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
P4Submit.applyCommit()
To avoid recalculating the same diffOpts for each commit, move it
out of applyCommit() and into the top-level run(). Also fix a bug
in that code which interpreted the value of detectRenames as a
string rather than as a boolean.
[pw: fix documentation, rearrange code a bit]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
P4 has a feature called "jobs" that allows linking changes
to a bug tracking system or other tasks. When submitting
code, a job name can be specified to mark that this change
is associated with a particular job.
Teach git-p4 to find an optional "Jobs:" line in git commit
messages and use them to make a Jobs section in the p4
change specifitation.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Luke Diamand
* ld/git-p4-tags-and-labels:
git p4: fix bug when enabling tag import/export via config variables
git p4: fix bug when verbose enabled with tag export
git p4: add test for tag import/export enabled via config
Use Python's True, not true. Causes failure when enabling tag
import or export in "git p4" using a config option rather than
the command line.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrong variable name used when verbose enabled, causes failure.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option. They
are stored in %xx notation, and when checked out, p4 converts
them back to normal.
When adding files with wildcards in git, the submit path must
be careful to use the encoded names in some places, and it
must use "-f" to add them. All other p4 commands that operate
on the client directory expect encoded filenames as arguments.
Support for wildcards in the clone/sync path was added in
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19),
but that change did not handle the submit path.
There was a problem with wildcards in the sync path too. Commit
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19)
handled files with p4 wildcards that were added or modified in
p4. Do this for deleted files, and also in branch detection
checks, too.
Reported-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way rename works is with a "p4 integrate", optionally
followed by a "p4 edit" if the change is not a 100% rename.
Contents are generated by applying a patch, not doing a file
system rename. Copy is similar.
In this case, p4 does not fix the permissions back to read-only.
Make sure this happens by calling "p4 sync -f".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to auto-create the client directory, added in 0591cfa
(git-p4: ensure submit clientPath exists before chdir,
2011-12-09), works when the client directory never existed.
But if the directory is summarily removed without telling p4,
the sync operation will not bring back all the files. Always
do "sync -f" if the client directory is newly created.
Reported-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verbose flag is common to all classes, or at least should be.
Make it a member of the base Command class, rather than
reimplementing for each class. Make option parsing mirror this.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
p4 itself treats an empty value for P4EDITOR as the same as
having P4EDITOR unset. Do the same for "git p4".
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one is already in 'next' but was somewhat lacking.
The configuration "git-p4.validLabelRegexp" is now called
"labelExportRegexp", and its default covers lowercase alphabets as
well.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing label import code looks at each commit being
imported, and then checks for labels at that commit. This
doesn't work in the real world though because it will drop
labels applied on changelists that have already been imported,
a common pattern.
This change adds a new --import-labels option. With this option,
at the end of the sync, git p4 gets sets of labels in p4 and git,
and then creates a git tag for each missing p4 label.
This means that tags created on older changelists are
still imported.
Tags that could not be imported are added to an ignore
list.
The same sets of git and p4 tags and labels can also be used to
derive a list of git tags to export to p4. This is enabled with
--export-labels in 'git p4 submit'.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In messages to the user and comments, change "git-p4" to "git p4".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Schneider
Luke Diamand
Junio C Hamano
Miguel Torroja
Vitor Antunes
Lex Spoon
Blair Holloway
Maxime Coste
Tolga Ceylan
Vlad Dogaru
Pete Wyckoff
Crestez Dan Leonard
Kazuki Saitoh
Alexandru Juncu
Ondřej Bílka
Veres Lajos
Miklós Fazekas
Brandon Casey
Eric S. Raymond
Gary Gibbons