If you do something like
- git add .
- git status
- git commit
- git show (or git diff HEAD)
one would expect to have analogous output from git status and git show
(or similar diff-related programs). This is generally not the case, as
git status has hard coded values for diff related options.
With this commit the hard coded settings are dropped from the status
command in favour for values provided by git_diff_ui_config.
What follows are some remarks on the concrete options which were hard
coded in git status:
diffopt.detect_rename
Since the very beginning of git status in a3e870f2e2 ("Add "commit"
helper script", 2005-05-30), git status always used rename detection,
whereas with commands like show and log one had to activate it with a
command line option. After 5404c116aa ("diff: activate diff.renames by
default", 2016-02-25) the default behaves the same by coincidence, but
changing diff.renames to other values can break the consistency between
git status and other commands again. With this commit one control the
same default behaviour with diff.renames.
diffopt.rename_limit
Similarly one has the option diff.renamelimit to adjust this limit for
all commands but git status. With this commit git status will also honor
those.
diffopt.break_opt
Unlike the other two options this cannot be configured by a
configuration option yet. This commit will also change the default
behaviour to not use break rewrites. But as rename detection is most
likely on, this is dangerous to be activated anyway as one can see
here:
https://public-inbox.org/git/xmqqegqaahnh.fsf@gitster.dls.corp.google.com/
Signed-off-by: Eckhard S. Maaß <eckhard.s.maass@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary purpose of three tests in 't4001-diff-rename.sh' is to
check rename detection in 'git status', but all three do so by running
'git status' upstream of a pipe, hiding its exit code. Consequently,
the test could continue even if 'git status' exited with error.
Use an intermediate file between 'git status' and 'test_i18ngrep' to
catch a potential failure of the former.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the documentation of diff-tree, it is stated that the -l option
"prevents rename/copy detection from running if the number of
rename/copy targets exceeds the specified number". The documentation
does not mention any special handling for the number 0, but the
implementation before commit 9f7e4bfa3b ("diff: remove silent clamp of
renameLimit", 2017-11-13) treated 0 as a special value indicating that
the rename limit is to be a very large number instead.
The commit 9f7e4bfa3b changed that behavior, treating 0 as 0. Revert
this behavior to what it was previously. This allows existing scripts
and tools that use "-l0" to continue working. The alternative (to have
"-l0" suppress rename detection) is probably much less useful, since
users can just refrain from specifying -M and/or -C to have the same
effect.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff -M" used to work better when two originally identical
files A and B got renamed to X/A and X/B by pairing A to X/A and B
to X/B, but this was broken in the 2.0 timeframe.
* sg/diff-multiple-identical-renames:
diffcore: fix iteration order of identical files during rename detection
If the two paths 'dir/A/file' and 'dir/B/file' have identical content
and the parent directory is renamed, e.g. 'git mv dir other-dir', then
diffcore reports the following exact renames:
renamed: dir/B/file -> other-dir/A/file
renamed: dir/A/file -> other-dir/B/file
While technically not wrong, this is confusing not only for the user,
but also for git commands that make decisions based on rename
information, e.g. 'git log --follow other-dir/A/file' follows
'dir/B/file' past the rename.
This behavior is a side effect of commit v2.0.0-rc4~8^2~14
(diffcore-rename.c: simplify finding exact renames, 2013-11-14): the
hashmap storing sources returns entries from the same bucket, i.e.
sources matching the current destination, in LIFO order. Thus the
iteration first examines 'other-dir/A/file' and 'dir/B/file' and, upon
finding identical content and basename, reports an exact rename.
Other hashmap users are apparently happy with the current iteration
order over the entries of a bucket. Changing the iteration order
would risk upsetting other hashmap users and would increase the memory
footprint of each bucket by a pointer to the tail element.
Fill the hashmap with source entries in reverse order to restore the
original exact rename detection behavior.
Reported-by: Bill Okara <billokara@gmail.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying machinery is well-tested, but the configuration option
itself was tested only in t3400-rebase.sh.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add basic use cases and corner cases tests for
"git diff -M --summary/stat".
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "renamed: %s -> %s" message which appears as part of
git-status(1) output. Two tests in t4001-diff-rename.sh explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
We no longer have "runstatus", but running "status" is no longer that
expensive anyway; it is a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are several candidates for a rename source, and one of them
has an identical basename to the rename target, take that one.
Noticed by Govind Salinas, posted by Shawn O. Pearce, partial patch
by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The speed of the built-in diff generator is nice; but the function names
shown by `diff -p' are /really/ nice. And I hate having to choose. So,
we hack xdiff to find the function names and print them.
xdiff has grown a flag to say whether to dig up the function names. The
builtin_diff function passes this flag unconditionally. I suppose it
could parse GIT_DIFF_OPTS, but it doesn't at the moment. I've also
reintroduced the `function name' into the test suite, from which it was
removed in commit 3ce8f089.
The function names are parsed by a particularly stupid algorithm at the
moment: it just tries to find a line in the `old' file, from before the
start of the hunk, whose first character looks plausible. Still, it's
most definitely a start.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes up a couple of minor issues with the real built-in
diff to be more usable:
- Omit ---/+++ header unless we emit diff output;
- Detect and punt binary diff like GNU does;
- Honor GIT_DIFF_OPTS minimally (only -u<number> and
--unified=<number> are currently supported);
- Omit line count of 1 from "@@ -l,k +m,n @@" hunk header
(i.e. when k == 1 or n == 1)
- Adjust testsuite for the lack of -p support.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds more cruft to diff --git header to record the blob SHA1 and
the mode the patch/diff is intended to be applied against, to help the
receiving end fall back on a three-way merge. The new header looks
like this:
diff --git a/apply.c b/apply.c
index 7be5041..8366082 100644
--- a/apply.c
+++ b/apply.c
@@ -14,6 +14,7 @@
// files that are being modified, but doesn't apply the patch
// --stat does just a diffstat, and doesn't actually apply
+// --show-index-info shows the old and new index info for...
...
Upon receiving such a patch, if the patch did not apply cleanly to the
target tree, the recipient can try to find the matching old objects in
her object database and create a temporary tree, apply the patch to
that temporary tree, and attempt a 3-way merge between the patched
temporary tree and the target tree using the original temporary tree
as the common ancestor.
The patch lifts the code to compute the hash for an on-filesystem
object from update-index.c and makes it available to the diff output
routine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clearly even Junio felt git "rename" header lines should say "from/to"
instead of "old/new", since he wrote the documentation that way.
This way it also matches "copy".
git-apply will accept both versions, at least for a while.
This introduces the diff-core, the layer between the diff-tree
family and the external diff interface engine. The calls to the
interface diff-tree family uses (diff_change and diff_addremove)
have not changed and will not change. The purpose of the
diff-core layer is to provide an infrastructure to transform the
set of differences sent from the applications, before sending
them to the external diff interface.
The recently introduced rename detection code has been rewritten
to use the diff-core facility. When applications send in
separate creates and deletes, matching ones are transformed into
a single rename-and-edit diff, and sent out to the external diff
interface as such.
This patch also enhances the rename detection code further to be
able to detect copies. Currently this happens only as long as
copy sources appear as part of the modified files, but there
already is enough provision for callers to report unmodified
files to diff-core, so that they can be also used as copy source
candidates. Extending the callers this way will be done in a
separate patch.
Please see and marvel at how well this works by trying out the
newly added t/t4003-diff-rename-1.sh test script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add '-R' flag to diff-tree, and change the test subdirectory
shell files to be executable (something that Junio couldn't
get me to do through the pure patch with my current patch
handling infrastructure).
This cleans up the way calls are made into the diff core from diff-tree
family and diff-helper. Earlier, these programs had "if
(generating_patch)" sprinkled all over the place, but those ugliness are
gone and handled uniformly from the diff core, even when not generating
patch format.
This also allowed diff-cache and diff-files to acquire -R
(reverse) option to generate diff in reverse. Users of
diff-tree can swap two trees easily so I did not add -R there.
[ Linus' note: I'll add -R to "diff-tree" too, since a "commit
diff" doesn't have another tree to switch around: the other
tree is always the parent(s) of the commit ]
Also -M<digits-as-mantissa> suggestion made by Linus has been
implemented.
Documentation updates are also included.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This rips out the rename detection engine from diff-helper and moves it
to the diff core, and updates the internal calling convention used by
diff-tree family into the diff core. In order to give the same option
name to diff-tree family as well as to diff-helper, I've changed the
earlier diff-helper '-r' option to '-M' (stands for Move; sorry but the
natural abbreviation 'r' for 'rename' is already taken for 'recursive').
Although I did a fair amount of test with the git-diff-tree with
existing rename commits in the core GIT repository, this should still be
considered beta (preview) release. This patch depends on the diff-delta
infrastructure just committed.
This implements almost everything I wanted to see in this series of
patch, except a few minor cleanups in the calling convention into diff
core, but that will be a separate cleanup patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Sunshine
Eckhard S. Maaß
SZEDER Gábor
Jonathan Tan
Junio C Hamano
SZEDER Gábor
Matthieu Moy
Antoine Pelisse
Ævar Arnfjörð Bjarmason
Johannes Schindelin
Mark Wooding
Junio C Hamano
Linus Torvalds