Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
"git rebase -i" with a recent update started showing an incorrect
count when squashing more than 10 commits.
* jk/rebase-i-squash-count-fix:
rebase--interactive: count squash commits above 10 correctly
"git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* jk/blame-fixes:
blame: output porcelain "previous" header for each file
blame: handle --no-abbrev
blame: fix alignment with --abbrev=40
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* jk/archive-zip-userdiff-config:
archive-zip: load userdiff config
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
Leakage of lockfiles in the config subsystem has been fixed.
* nd/config-misc-fixes:
config.c: handle lock file in error case in git_config_rename_...
config.c: rename label unlock_and_out
config.c: handle error case for fstat() calls
Recent update to the default abbreviation length that auto-scales
lacked documentation update, which has been corrected.
* jc/abbrev-autoscale-config:
config.abbrev: document the new default that auto-scales
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* jc/compression-config:
compression: unify pack.compression configuration parsing
Update the procedure to generate "tags" for developer support.
* jk/make-tags-find-sources-tweak:
Makefile: exclude contrib from FIND_SOURCE_FILES
Makefile: match shell scripts in FIND_SOURCE_FILES
Makefile: exclude test cruft from FIND_SOURCE_FILES
Makefile: reformat FIND_SOURCE_FILES
Some platforms no longer understand "latin-1" that is still seen in
the wild in e-mail headers; replace them with "iso-8859-1" that is
more widely known when conversion fails from/to it.
* jc/latin-1:
utf8: accept "latin-1" as ISO-8859-1
utf8: refactor code to decide fallback encoding
"git fsck --connectivity-check" was not working at all.
* jk/fsck-connectivity-check-fix:
fsck: lazily load types under --connectivity-only
fsck: move typename() printing to its own function
t1450: use "mv -f" within loose object directory
fsck: check HAS_OBJ more consistently
fsck: do not fallback "git fsck <bogus>" to "git fsck"
fsck: tighten error-checks of "git fsck <head>"
fsck: prepare dummy objects for --connectivity-check
fsck: report trees as dangling
t1450: clean up sub-objects in duplicate-entry test
Rewrite a scripted porcelain "git difftool" in C.
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
"git show-ref HEAD" used with "--verify" because the user is not
interested in seeing refs/remotes/origin/HEAD, and used with
"--head" because the user does not want HEAD to be filtered out,
i.e. "git show-ref --head --verify HEAD", did not work as expected.
* vp/show-ref-verify-head:
show-ref: remove a stale comment
show-ref: remove dead `if (verify)' check
show-ref: detect dangling refs under --verify as well
show-ref: move --quiet handling into show_one()
show-ref: allow -d to work with --verify
show-ref: accept HEAD with --verify
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
A crashing bug introduced in v2.11 timeframe has been found (it is
triggerable only in fast-import) and fixed.
* jk/clear-delta-base-cache-fix:
clear_delta_base_cache(): don't modify hashmap while iterating
"git tag" and "git verify-tag" learned to put GPG verification
status in their "--format=<placeholders>" output format.
* st/verify-tag:
t/t7004-tag: Add --format specifier tests
t/t7030-verify-tag: Add --format specifier tests
builtin/tag: add --format argument for tag -v
builtin/verify-tag: add --format to verify-tag
ref-filter: add function to print single ref_array_item
gpg-interface, tag: add GPG_VERIFY_OMIT_STATUS flag
The sequencer machinery has been further enhanced so that a later
set of patches can start using it to reimplement "rebase -i".
* js/sequencer-i-countdown-3: (38 commits)
sequencer (rebase -i): write out the final message
sequencer (rebase -i): write the progress into files
sequencer (rebase -i): show the progress
sequencer (rebase -i): suggest --edit-todo upon unknown command
sequencer (rebase -i): show only failed cherry-picks' output
sequencer (rebase -i): show only failed `git commit`'s output
sequencer: use run_command() directly
sequencer: update reading author-script
sequencer (rebase -i): differentiate between comments and 'noop'
sequencer (rebase -i): implement the 'drop' command
sequencer (rebase -i): allow rescheduling commands
sequencer (rebase -i): respect strategy/strategy_opts settings
sequencer (rebase -i): respect the rebase.autostash setting
sequencer (rebase -i): run the post-rewrite hook, if needed
sequencer (rebase -i): record interrupted commits in rewritten, too
sequencer (rebase -i): copy commit notes at end
sequencer (rebase -i): set the reflog message consistently
sequencer (rebase -i): refactor setting the reflog message
sequencer (rebase -i): allow fast-forwarding for edit/reword
sequencer (rebase -i): implement the 'reword' command
...
Code cleanup.
* js/exec-path-coverity-workaround:
git_exec_path: do not return the result of getenv()
git_exec_path: avoid Coverity warning about unfree()d result
"git submodule push" learned "--recurse-submodules=only option to
push submodules out without pushing the top-level superproject.
* bw/push-submodule-only:
push: add option to push only submodules
submodules: add RECURSE_SUBMODULES_ONLY value
transport: reformat flag #defines to be more readable
An error message with an ASCII control character like '\r' in it
can alter the message to hide its early part, which is problematic
when a remote side gives such an error message that the local side
will relay with a "remote: " prefix.
* jk/vreport-sanitize:
vreport: sanitize ASCII control chars
Revert "vreportf: avoid intermediate buffer"
AsciiDoc uses a configuration file to implement macros like linkgit,
while Asciidoctor uses Ruby extensions. Implement a Ruby extension that
implements the linkgit macro for Asciidoctor in the same way that
asciidoc.conf does for AsciiDoc. Adjust the Makefile to use it by
default.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch to dynamic allocation with strbuf, so we can avoid dealing
with magic numbers in the code and reduce the cognitive burden from
the programmers. The original code is correct, but programmers no
longer have to count bytes needed for static allocation to know that.
As a side effect of this change, we also reduce the snprintf()
calls, that may silently truncate results if the programmer is not
careful.
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
string_list_clear() handles empty lists just fine, so remove the
redundant check.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-completion.bash about the 'diff' option to 'git diff
--submodule=', which was added in Git 2.11.
Signed-off-by: Peter Law <PeterJCLaw@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patch generated by Coccinelle and contrib/coccinelle/object_id.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patch generated by Coccinelle and contrib/coccinelle/object_id.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exchange the values of graph->columns and graph->new_columns using the
macro SWAP instead of hand-rolled code. The result is shorter and
easier to read.
This transformation was not done by the semantic patch swap.cocci
because there's an unrelated statement between the second and the last
step of the exchange, so it didn't match the expected pattern.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro SWAP to exchange the value of pairs of variables instead
of swapping them manually with the help of a temporary variable. The
resulting code is shorter and easier to read.
The two cases were not transformed by the semantic patch swap.cocci
because it's extra careful and handles only cases where the types of all
variables are the same -- and here we swap two ints and use an unsigned
temporary variable for that. Nevertheless the conversion is safe, as
the value range is preserved with and without the patch.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch swap.cocci to convert hand-rolled swaps to use
the macro SWAP. The resulting code is shorter and easier to read, the
object code is effectively unchanged.
The patch for object.c had to be hand-edited in order to preserve the
comment before the change; Coccinelle tried to eat it for some reason.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the exported macro SWAP instead of the file-scoped macro swap and
remove the latter's definition.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a macro for exchanging the values of variables. It allows users
to avoid repetition and takes care of the temporary variable for them.
It also makes sure that the storage sizes of its two parameters are the
same. Its memcpy(1) calls are optimized away by current compilers.
Also add a conservative semantic patch for transforming only swaps of
variables of the same type.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as
8ed0a740dd42bd0724aebed6e3b07c4ea2a2d5e8. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git-p4 on Windows, with multiple git-p4.mapUser entries in
git config - no user mappings are applied to the generated repository.
Reproduction Steps:
1. Add multiple git-p4.mapUser entries to git config on a Windows
machine
2. Attempt to clone a p4 repository
None of the user mappings will be applied.
This issue is actually caused by gitConfigList, using split(os.linesep)
to convert the output of git config --get-all into a list. On Windows,
os.linesep is equal to '\r\n' - however git.exe returns configuration
with a line seperator of '\n'.
This leads to the list returned by gitConfigList containing only one
element - which contains the full output of git config --get-all in
string form, which causes problems for the code introduced to
getUserMapFromPerforceServer in 10d08a149d ("git-p4: map a P4 user to
Git author name and email address", 2016-03-01)
This issue should be caught by the test introduced in 10d08a1, however
would require running on Windows to reproduce.
Using splitlines solves this issue, by splitting config on all
typical delimiters ('\n', '\r\n' etc.)
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
