Those filed hold variables, settings and information set by the
configuration process run by './configure'; in Autotools-based
build system that kind of stuff should only be removed by
"make distclean". Having it removed by "make clean" is not only
inconsistent, but causes real confusion for that part of the Git
audience that is used to the Autotools semantics; for example,
an autotools old-timer that has run:
./configure --prefix /opt/git
in the past, without running "make distclean" afterwards, would
expect a "make install" issued after a "make clean" to rebuild and
install git in '/opt/git'; but with the current behaviour, the
"make clean" invocation removes (among the other things) the file
'config.mak.autogen', so that the "make install" falls back to the
default prefix of '$HOME', thus installing git in the user's home
directory -- definitely unexpected.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow "./config.status --recheck; ./config.status" to work
correctly as a mean of reconfiguring the tree with the same configure
argument used in the previous "./configure" invocation.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are merely useless now, but would get in the way of future changes.
No semantic change is intended.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are merely useless now, but would get in the way of future changes.
No semantic change is intended.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name fits better with the macro signature, and underlines the
similarities with the autoconf-provided macro AC_SUBST (which will be
made even more pronounced in planned future commits).
Once again, no semantic change is intended, and indeed no change to the
generated configure script is expected.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change one-argument GIT_CONF_APPEND_LINE([VAR=VAL]) to
GIT_CONF_APPEND_LINE([VAR], [VAL]), that is more similar to the usual
AC_SUBST macro; this is only a preparatory change in view of future
refactorings.
No semantic change is intended. In fact, the generated configure file
doesn't change at all.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three ways to specify an external diff command:
GIT_EXTERNAL_DIFF in the environment, diff.external in the
config, or a "diff" gitattribute. The current order of
precedence is:
1. gitattribute
2. GIT_EXTERNAL_DIFF
3. diff.external
Usually our rule is that environment variables should take
precedence over on-disk config (i.e., option 2 should come
before option 1). However, this situation is trickier than
some, because option 1 is more specific to the individual
file than option 2 (which affects all files), so it might be
preferable. So the current behavior can be seen as
implementing "do the specific thing if we can, but fall back
to this general thing".
This is probably not what we would do if we were writing git
from scratch, but it has been this way for several years,
and is not worth changing. So let's at least document that
this is the way it's supposed to work with a test.
While we're there, let's also make sure that diff.external
(which was not previously tested at all) works by running it
through the same tests as GIT_EXTERNAL_DIFF.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn insists on creating the "master" head (unless it exists) on every
"fetch". It is useful that it gets created initially, when no head exists
- users expect this git convention of having a "master" branch on initial
clone.
However creating it when there already is another head does not provide any
value - the ref is never updated, so it just gets stale after a while. Also,
some users find it annoying that it gets recreated, especially when they would
like the git branch names to follow SVN repository branch names. More
background in http://thread.gmane.org/gmane.comp.version-control.git/115030
Make git-svn skip the "master" creation if HEAD already points at a valid head.
This means "master" does get created on initial "clone" but does not get
recreated once a user deletes it.
Also, make post_fetch_checkout work with any head that is pointed to by HEAD,
not just "master".
Also, use fatal error handling consistent with the rest of the program for
post_fetch_checkout.
Signed-off-by: Marcin Owsiany <marcin@owsiany.pl>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We can just feed our URL straight to git-credential and it
will parse it for us, saving us some code.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-credential command requires that you feed it a
broken-down credential, which means that the client needs to
parse a URL itself. Since we have our own URL-parsing
routines, we can easily allow the caller to just give us the
URL as-is, saving them some code.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a credential to git-credential, we omit fields
that do not have a true value. This will skip empty or
undefined fields (which we want), but will also accidentally
skip usernames or passwords which happen to have a non-true
value (e.g., "0"). Be more careful by checking for non-zero
length.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text in git-credential(1) was copied from
technical/api-credentials, so it still talks about the
input/output format as coming from git to the helper. Since
the surrounding text already indicates that this format is
used for reading and writing with git credential, we can
just remove the extraneous confusing bits.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon seeing a type-change filepair, "diff --no-ext-diff" does not
show the usual "deletion followed by addition" split patch and does
not run the external diff driver either.
This is because the logic to disable external diff was placed at a
wrong level in the callchain. run_diff_cmd() decides to show the
split patch only when external diff driver is not configured or
specified via GIT_EXTERNAL_DIFF environment, but this is done before
checking if --no-ext-diff was given. To make things worse,
run_diff_cmd() checks --no-ext-diff and disables the output for such
a filepair completely, as the callchain below it (e.g. builtin_diff)
does not want to handle typechange filepairs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d28436736a078a429213003a9472e8caeb86c286, which
was done without realizing that the updated command line argument
order was lost by mistake.
79a9312 (commit-tree: update the command line parsing, 2011-11-09)
updated the command line parser to understand the usual "flags first
and then non-flag arguments" order, in addition to the original and
a bit unusual "tree comes first and then zero or more -p <parent>".
Unfortunately, ba3c69a (commit: teach --gpg-sign option, 2011-10-05)
broke it by mistake. Resurrect it, and protect the feature with a
test from future breakages.
Noticed by Keshav Kini
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionnally, pages named Foo:Bar are page 'Bar' in namespace 'Foo'.
However, it is also possible to call a page Foo:Bar if 'Foo' is not a
namespace. In this case, the actual name of the page is 'Foo:Bar', in the
main namespace. Since we can't tell with only the filename, query the
wiki for a namespace 'Foo' in these cases, but deal with the case where
no such namespace is found.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the code less bulky and easier to read. Also do not overlook
failures like e.g. git failing because of unexpected signals.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, 'echo X | dd bs=1k seek=1' creates a file with 2050 bytes
on Windows instead of the expected 1026 bytes, so that a test fails. Since
the actual contents of the file are irrelevant as long as there is at
least one zero byte so that the diff machinery recognizes it as binary,
use printf to generate it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most one-level indents were 1 HT (horizontal tab) followed by 1 SP.
Remove the SP.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --shortstat test depends on the same scenario as the --stat
test. Use the part of the same expected result for the --stat test
to avoid duplicating it manually.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not hide possible git errors by masking its process
exit status.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The nested quoting is not needed in this cases, thus the previous
version did work just fine. Nevertheless the usage is misleading,
so just achieve nested quoting by using double quotes instead. Lower
the probability of breakage in the future and make the code easier
to read.
NOTE: Just dropping the single quotes around the sed arguments would
have also been possible.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some wiki, including https://git.wiki.kernel.org/ have invalid revision
numbers (i.e. the actual revision numbers are non-contiguous). Don't die
when encountering one.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initial phases of push and pull with git-remote-mediawiki can be long on
a large wiki. Let the user know what's going on.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When notes are created to record a push, it normally doesn't exist yet.
However, when a push is interrupted and then restarted, it may happen
that a commit already has notes attached, and we want to reflect the newly
created remote revision, hence use 'git notes add -f' to override the
existing one
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The algorithm to find a path from the local revision to the remote one
was calling "git rev-list" and parsing its output N times. Run rev-list
only once, and fill a hashtable with the result to optimize the body of
the loop.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to use git-remote-mediawiki on a tree with both .mw files
and other files. Before git-remote-mediawiki learnt how to export
mediafiles, such mixed trees allowed the user to maintain both the wiki
and other files for the same project in the same repository. With the
newly added support for exporting mediafiles, pushing such mixed trees
would upload unrelated files as mediafiles, which may not be desired.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $HOME is unset, home_config_paths fails and returns NULL pointers
for user_config and xdg_config. Valgrind complains with Syscall param
access(pathname) points to unaddressable byte(s).
Don't call blindly access() on these variables, but test them for
NULL-ness before.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "status" command recently learned to describe the
in-progress operation in its long output format (e.g.,
rebasing, am, etc). This message gets its own slot in the
color table, even though it is not configurable. As a
result, if the user has set color.status.header to a
non-default value, this message will not match (and cannot
be made to match, as there is no config option).
It is probably more sane to just color it like the rest of
the text (i.e., just use color.status.header). This would
not allow users to customize the color of this message
independently, but they cannot do that with the current code
anyway, and if somebody wants to build customizable
colorization later, this patch does not make it much harder
to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
The streaming index-pack introduced in 1.7.11 had a data corruption
bug, and this should fix it.
* jk/index-pack-streaming-fix:
index-pack: loop while inflating objects in unpack_data
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
Tightens dependency rules to avoid unnecessary recompilation, and
cleans up our Makefile in general.
* jn/makefile-cleanup:
Makefile: document ground rules for target-specific dependencies
Makefile: move GIT-VERSION-FILE dependencies closer to use
Makefile: build instaweb similar to other scripts
Makefile: update scripts when build-time parameters change
Makefile: do not replace @@GIT_VERSION@@ in shell scripts
Makefile: split prefix flags from GIT-CFLAGS
Makefile: be silent when only GIT_USER_AGENT changes
Makefile: split GIT_USER_AGENT from GIT-CFLAGS
Makefile: do not replace @@GIT_USER_AGENT@@ in scripts
Makefile: apply dependencies consistently to sparse/asm targets
Makefile: do not have git.o depend on common-cmds.h
Makefile: fold XDIFF_H and VCSSVN_H into LIB_H
Makefile: fold MISC_H into LIB_H
Makefile: sort LIB_H list
A handful of files and directories we create had tighter than
necessary permission bits when the user wanted to have group
writability (e.g. by setting "umask 002").
* ar/clone-honor-umask-at-top:
add: create ADD_EDIT.patch with mode 0666
rerere: make rr-cache fanout directory honor umask
Restore umasks influence on the permissions of work tree created by clone
"git apply" learned to wiggle the base version and perform three-way
merge when a patch does not exactly apply to the version you have.
* jc/apply-3way:
apply: tests for the --3way option
apply: document --3way option
apply: allow rerere() to work on --3way results
apply: register conflicted stages to the index
apply: --3way with add/add conflict
apply: move verify_index_match() higher
apply: plug the three-way merge logic in
apply: fall back on three-way merge
apply: accept -3/--3way command line option
apply: move "already exists" logic to check_to_create()
apply: move check_to_create_blob() closer to its sole caller
apply: further split load_preimage()
apply: refactor "previous patch" logic
apply: split load_preimage() helper function out
apply: factor out checkout_target() helper function
apply: refactor read_file_or_gitlink()
apply: clear_image() clears things a bit more
apply: a bit more comments on PATH_TO_BE_DELETED
apply: fix an incomplete comment in check_patch()
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
- (glossary) the quotes around the Wikipedia URL prevented its
linkification in frontends that support it; remove them
- (manual) newer version (SHA-1) == following, older == preceding, not
the other way around
- trivial typo and wording fixes
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git p4" to notice "Jobs:" in the log message and relay it to
Perforce to trigger its "jobs" support.
# By Pete Wyckoff
* pw/git-p4-jobs:
git p4: notice Jobs lines in git commit messages
git p4 test: refactor marshal_dump
git p4: remove unused P4Submit interactive setting
The error message from "git push $there :bogo" mentioned we tried
and failed to guess what ref is being deleted based on the LHS of
the refspec, which we don't.
# By Jeff King
* jk/push-delete-ref-error-message:
push: don't guess at qualifying remote refs on deletion
If "git am" fails to apply something, the end user may need to know
where to find the patch that failed to apply, so that the user can
do other things (e.g. trying "GNU patch" on it, running "diffstat"
to see what it tried to change, etc.) The input to "am" may have
contained more than one patch, or the message may have been MIME
encoded, and knowing what the user fed to "am" does not help very
much for this purpose.
Also introduce advice.amworkdir configuration to allow people who
learned where to look to squelch this message.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
