Since 88a21979c (fetch/pull: recurse into submodules when necessary) all
fetched commits are examined if they contain submodule changes (unless
configuration or command line options inhibit that). If a newly recorded
submodule commit is not present in the submodule, a fetch is run inside
it to download that commit.
Checking new refs was done in an else branch where it wasn't executed for
tags. This normally isn't a problem because tags are only fetched with
the branches they live on, then checking the new commits in the fetched
branches for submodule commits will also process all tags. But when a
specific tag is fetched (or the refspec contains refs/tags/) commits only
reachable by tags won't be searched for submodule commits, which is a bug.
Fix that by moving the code outside the if/else construct to handle new
tags just like any other ref. The performance impact of adding tags that
most of the time lie on a branch which is checked anyway for new submodule
commit should be minimal, as since 6859de4 (fetch: avoid quadratic loop
checking for updated submodules) all ref-tips are collected first and then
fed to a single rev-list.
Spotted-by: Jeff King <peff@peff.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git am empty" test uses the construct
git am empty-file && false || :
which unconditionally returns true. Use test_must_fail instead, which
also has the benefit of noticing if "git am" has segfaulted.
While at it, tighten the test to check that the diagnostic appears on
stderr and not stdout.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.8.5~2 (am: don't infloop for an empty input file, 2012-02-25)
added a check for the human-readable message "Patch format detection
failed." but we forgot to suppress that check when running tests with
git configured to write output in another language.
Noticed by running tests with GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When v1.7.9.2~28^2 (2012-02-02) marked "Your branch is behind" and
friends for translation, it forgot to adjust tests not to check those
messages when tests are being run with git configured to write its
output in another language.
With this patch applied, t2020 and t6040 pass again with
GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We give the username and password to curl by sticking them
in a buffer of the form "user:pass" and handing the result
to CURLOPT_USERPWD. Since curl 7.19.1, there is a split
mechanism, where you can specify each element individually.
This has the advantage that a username can contain a ":"
character. It also is less code for us, since we can hand
our strings over to curl directly. And since curl 7.17.0 and
higher promise to copy the strings for us, we we don't even
have to worry about memory ownership issues.
Unfortunately, we have to keep the ugly code for old curl
around, but as it is now nicely #if'd out, we can easily get
rid of it when we decide that 7.19.1 is "old enough".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a credential to give to curl, we must copy it
into a "user:pass" buffer and then hand the buffer to curl.
Old versions of curl did not copy the buffer, and we were
expected to keep it valid. Newer versions of curl will copy
the buffer.
Our solution was to use a strbuf and detach it, giving
ownership of the resulting buffer to curl. However, this
meant that we were leaking the buffer on newer versions of
curl, since curl was just copying it and throwing away the
string we passed. Furthermore, when we replaced a
credential (e.g., because our original one was rejected), we
were also leaking on both old and new versions of curl.
This got even worse in the last patch, which started
replacing the credential (and thus leaking) on every http
request.
Instead, let's use a static buffer to make the ownership
more clear and less leaky. We already keep a static "struct
credential", so we are only handling a single credential at
a time, anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, the private functions in this file were not very
much documented; even though what each of them do is reasonably
self explanatory, the ownership rules for various buffers and
data structures were not very obvious.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These point into a single line in the patch text we read from
the input, and they are not used to modify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The highlightning of combined diffs is currently disabled. This is
because output from a combined diff is much harder to highlight because
it is not obvious which removed and added lines should be compared.
Current code requires that the number of added lines is equal to the
number of removed lines and only skips first +/- character, treating
second +/- as a line content, Thus, it is not possible to simply use
existing algorithm unchanged for combined diffs.
Let's start with a simple case: only highlight changes that come from
one parent, i.e. when every removed line has a corresponding added line
for the same parent. This way the highlightning cannot get wrong. For
example, following diffs would be highlighted:
- removed line for first parent
+ added line for first parent
context line
-removed line for second parent
+added line for second parent
or
- removed line for first parent
-removed line for second parent
+ added line for first parent
+added line for second parent
but following output will not:
- removed line for first parent
-removed line for second parent
+added line for second parent
++added line for both parents
In other words, we require that pattern of '-'-es in pre-image matches
pattern of '+'-es in post-image.
Further changes may introduce more intelligent approach that better
handles combined diffs.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading diff output is sometimes very hard, even if it's colored,
especially if lines differ only in few characters. This is often true
when a commit fixes a typo or renames some variables or functions.
This commit teaches gitweb to highlight characters that are different
between old and new line with a light green/red background. This should
work in the similar manner as in Trac or GitHub.
The algorithm that compares lines is based on contrib/diff-highlight.
Basically, it works by determining common prefix/suffix of corresponding
lines and highlightning only the middle part of lines. For more
information, see contrib/diff-highlight/README.
Combined diffs are not supported but a following commit will change it.
Since we need to pass esc_html()'ed or esc_html_hl_regions()'ed lines to
format_diff_lines(), so it was taught to accept preformatted lines
passed as a reference.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now lines are formatted closer to place where we actually use HTML
formatted output.
This means that we put raw lines in the @chunk accumulator, rather than
formatted lines. Because we still need to know class (type) of line
when accumulating data to post-process and print, process_diff_line()
subroutine was retired and replaced by diff_line_class() used in
git_patchset_body() and new restructured format_diff_line() used in
print_diff_chunk().
As a side effect, we have to pass \%from and \%to down to callstack.
This is a preparation patch for diff refinement highlightning. It's not
meant to change gitweb output.
[jn: wrote commit message]
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This renames print_sidebyside_diff_chunk() to print_diff_chunk() and
makes use of it for both side-by-side and inline diffs. Now diff lines
are always accumulated before they are printed. This opens the
possibility to preprocess diff output before it's printed, which is
needed for diff refinement highlightning (implemented in incoming
patches).
If print_diff_chunk() was left as is, the new function
print_inline_diff_lines() could reorder diff lines. It first prints all
context lines, then all removed lines and finally all added lines. If
the diff output consisted of mixed added and removed lines, gitweb would
reorder these lines. This is true for combined diff output, for
example:
- removed line for first parent
+ added line for first parent
-removed line for second parent
++added line for both parents
would be rendered as:
- removed line for first parent
-removed line for second parent
+ added line for first parent
++added line for both parents
To prevent gitweb from reordering lines, print_diff_chunk() calls
print_diff_lines() as soon as it detects that both added and removed
lines are present and there was a class change, and at the end of chunk.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, print_sidebyside_diff_chunk() does two things: it
accumulates diff lines and prints them. Accumulation may be used to
perform additional operations on diff lines, so it makes sense to split
these two things. Thus, whole code that formats and prints diff lines
in the 'side-by-side' manner is moved out of print_sidebyside_diff_chunk()
to a separate subroutine and two conditions that control printing
diff liens are merged.
Thanks to that, we can easily (in later patches) replace call to that
subroutine with a call to more generic print_diff_lines() that will
control whether 'inline' or 'side-by-side' diff should be printed.
As a side effect, context lines are printed just before printing added
and removed lines, and at the end of chunk (previously, they were
printed immediately on the class change). However, this doesn't change
gitweb output.
The outcome of this patch is that print_sidebyside_diff_chunk() is now
much shorter and easier to read.
While at it, drop the '# assume that it is change' comment. According
to Jakub Narębski:
What I meant here when I was writing it that they are lines that
changed between two versions, like '!' in original (not unified)
context format.
We can omit this comment.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change, esc_html_hl_regions() accepts options and passes them
down to esc_html(). This may be needed if a caller wants to pass
-nbsp=>1 to esc_html().
The idea and implementation example of this change was described in
337da8d2 (gitweb: Introduce esc_html_match_hl and esc_html_hl_regions,
2012-02-27). While other suggestions may be more useful in some cases,
there is no need to implement them at the moment. The
esc_html_hl_regions() interface may be changed later if it's needed.
[mk: extracted from larger patch and wrote commit message]
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $end is equal to or less than $begin, esc_html_hl_regions()
generates an empty <span> element. It normally shouldn't be visible in
the web browser, but it doesn't look good when looking at page source.
It also minimally increases generated page size for no special reason.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $s->[0] and $s->[1] variables look a bit cryptic. Let's rename them
to $begin and $end so that it's clear what they do.
Suggested-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between v1.7.1 and v1.7.2, 582aa00bdffb switched the default "diff"
invocation not to use XDF_NEED_MINIMAL, but this breaks "git blame"
rather badly.
Allow the command line option to ask for an extra careful matching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I tentatively named the release notes "1.7.11" but this may have to
be renamed to "1.8" or some other name later. Let's see how well
we would do during this cycle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack everything into one big pack with "git repack
-Ad", any unreferenced objects in to-be-deleted packs are
exploded into loose objects, with the intent that they will
be examined and possibly cleaned up by the next run of "git
prune".
Since the exploded objects will receive the mtime of the
pack from which they come, if the source pack is old, those
loose objects will end up pruned immediately. In that case,
it is much more efficient to skip the exploding step
entirely for these objects.
This patch teaches pack-objects to receive the expiration
information and avoid writing these objects out. It also
teaches "git gc" to pass the value of gc.pruneexpire to
repack (which in turn learns to pass it along to
pack-objects) so that this optimization happens
automatically during "git gc" and "git gc --auto".
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The print_feed_meta() subroutine generates links for feeds with and
without merges, in RSS and Atom formats. However because %href_params
was not properly reset, it generated links with "--no-merges" for all
except the very first link.
Before:
<link rel="alternate" title="[..] - Atom feed" href="/?p=.git;a=atom;opt=--no-merges" type="application/atom+xml" />
<link rel="alternate" title="[..] - Atom feed (no merges)" href="/?p=.git;a=atom;opt=--no-merges" type="application/atom+xml" />
After:
<link rel="alternate" title="[..] - Atom feed" href="/?p=.git;a=atom" type="application/atom+xml" />
<link rel="alternate" title="[..] - Atom feed (no merges)" href="/?p=.git;a=atom;opt=--no-merges" type="application/atom+xml" />
Signed-off-by: Sebastian Pipping <sebastian@pipping.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Speed up prepare_revision_walk() by adding commits without sorting
to the commit_list and at the end sort the list in one go. Thanks
to mergesort() working behind the scenes, this is a lot faster for
large numbers of commits than the current insert sort.
Also introduce and use commit_list_reverse(), to keep the ordering
of commits sharing the same commit date unchanged. That's because
commit_list_insert_by_date() sorts commits with descending date,
but adds later entries with the same date entries last, while
commit_list_insert() always inserts entries at the top. The
following commit_list_sort_by_date() keeps the order of entries
sharing the same date.
Jeff's test case, in a repo with lots of refs, was to run:
# make a new commit on top of HEAD, but not yet referenced
sha1=`git commit-tree HEAD^{tree} -p HEAD </dev/null`
# now do the same "connected" test that receive-pack would do
git rev-list --objects $sha1 --not --all
With a git.git with a ref for each revision, master needs (best of
five):
real 0m2.210s
user 0m2.188s
sys 0m0.016s
And with this patch:
real 0m0.480s
user 0m0.456s
sys 0m0.020s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the insertion sort in commit_list_sort_by_date() with a
call to the generic mergesort function. This sets the stage for
using commit_list_sort_by_date() for larger lists, as shown in
the next patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a generic bottom-up mergesort implementation for singly linked
lists. It was inspired by Simon Tatham's webpage on the topic[1], but
not so much by his implementation -- for no good reason, really, just a
case of NIH.
[1] http://www.chiark.greenend.org.uk/~sgtatham/algorithms/listsort.html
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The allocations made by unpack_nondirectories() using create_ce_entry()
are never freed.
In the non-merge case, we duplicate them using add_entry() and later
only look at the first allocated element (src[0]), perhaps even only
by mistake. Split out the actual addition from add_entry() into the
new helper do_add_entry() and call this non-duplicating function
instead of add_entry() to avoid the leak.
Valgrind reports this for the command "git archive v1.7.9" without
the patch:
==13372== LEAK SUMMARY:
==13372== definitely lost: 230,986 bytes in 2,325 blocks
==13372== indirectly lost: 0 bytes in 0 blocks
==13372== possibly lost: 98 bytes in 1 blocks
==13372== still reachable: 2,259,198 bytes in 3,243 blocks
==13372== suppressed: 0 bytes in 0 blocks
And with the patch applied:
==13375== LEAK SUMMARY:
==13375== definitely lost: 65 bytes in 1 blocks
==13375== indirectly lost: 0 bytes in 0 blocks
==13375== possibly lost: 0 bytes in 0 blocks
==13375== still reachable: 2,364,417 bytes in 3,245 blocks
==13375== suppressed: 0 bytes in 0 blocks
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
src[0] points to the index entry in the merge case and to the first
tree to unpack in the non-merge case. We only want to mark the index
entry, so check first if we're merging.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the base argument has a "/" chararacter, then only iterate over the
reference subdir whose name is the part up to the last "/".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Store references hierarchically in a tree that matches the
pseudo-directory structure of the reference names. Add a new kind of
ref_entry (with flag REF_DIR) to represent a whole subdirectory of
references. Sort ref_dirs one subdirectory at a time.
NOTE: the dirs can now be sorted as a side-effect of other function
calls. Therefore, it would be problematic to do something from a
each_ref_fn callback that could provoke the sorting of a directory
that is currently being iterated over (i.e., the directory containing
the entry that is being processed or any of its parents).
This is a bit far-fetched, because a directory is always sorted just
before being iterated over. Therefore, read-only accesses cannot
trigger the sorting of a directory whose iteration has already
started. But if a callback function would add a reference to a parent
directory of the reference in the iteration, then try to resolve a
reference under that directory, a re-sort could be triggered and cause
the iteration to work incorrectly.
Nevertheless...add a comment in refs.h warning against modifications
during iteration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the more usual indexing idiom for clarity.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This purely textual change is in preparation for storing references
hierarchically, when the old ref_array structure will represent one
"directory" of references. Rename functions that deal with this
structure analogously, and also rename the structure's "refs" member
to "entries".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is obviously silly by itself, but it is a step towards
adding a second member to the union.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return 0 (instead of -1) for zero-length components. Move the
interpretation of zero-length components as illegal to
check_refname_format().
This will make it easier to extend check_refname_format() to also
check whether directory names are valid.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function free_ref_entry(). This function will become nontrivial
when ref_entry (soon) becomes polymorphic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save a bunch of lines of code and a couple of strlen() calls.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It costs a bit of boilerplate, but it means that the function can be
ignorant of how cached refs are stored.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract function do_for_each_ref_in_arrays() from do_for_each_ref().
The new function will be a useful building block for storing refs
hierarchically.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract function do_for_each_ref_in_array() from do_for_each_ref().
The new function will be a useful building block for storing refs
hierarchically.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set and clear current_ref within do_one_ref() instead of setting it
here and leaving it to somebody else to clear it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder definitions in file: first check_refname_format() and helper
functions, then the functions for managing the ref_entry and ref_array
data structures, then ref_cache, then the more "business-logicky"
stuff. No code is changed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the default pager and editor chosen at compile time in the
git-var(1) manpage so users curious about what command _this_ copy of
git will fall back to when EDITOR, VISUAL, and PAGER are unset can
find the answer quickly.
In builds leaving those settings uncustomized, this patch makes the
manpage continue to say "usually vi" and "usually less" so the
formatted documentation is usable for a wide audience including users
of custom builds that change those settings. If you would like your
copy of the docs to be less noncommittal, you will need to set
DEFAULT_PAGER=less and DEFAULT_EDITOR=vi explicitly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is main test case for the original problem that triggered this
patch series. We create a repo with 50k tags and then test whether
git-clone over the smart HTTP protocol succeeds.
Note that we construct the repo in a slightly different way than the
original script used to reproduce the problem. This is because the
original script just created 50k tags all pointing to the same commit,
so if there was a bug where remote-curl.c was not passing all the refs
to fetch-pack we wouldn't know. The clone would succeed even if only one
tag was passed, because all the other tags were pointing at the same SHA
and would be considered present.
Instead we create a repo with 50k independent (dangling) commits and
then tag each of those commits with a unique tag. This way if one of the
tags is not given to fetch-pack, later stages of the clone would
complain about it.
This allows us to test both that the command line overflow was fixed, as
well as that it was fixed in a way that doesn't leave out any of the
refs.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These test cases focus only on testing the parsing of refs on stdin,
without bothering with the rest of the fetch-pack machinery. We pass in
the refs using different combinations of command line and stdin and then
we watch fetch-pack's stdout to see whether it prints all the refs we
specified (but we ignore their order).
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can throw an arbitrary number of refs at fetch-pack using
its --stdin option, we use it in the remote-curl helper to bypass the
OS command line length limit.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax for the use of mark references in fast-import
demands either a SP (space) or LF (end-of-line) after
a mark reference. Fast-import does not complain when garbage
appears after a mark reference in some cases.
Factor out parsing of mark references and complain if
errant characters are found. Also be a little more careful
when parsing "inline" and SHA1s, complaining if extra
characters appear or if the form of the dataref is unrecognized.
Buggy input can cause fast-import to produce the wrong output,
silently, without error. This makes it difficult to track
down buggy generators of fast-import streams. An example is
seen in the last line of this commit command:
commit refs/heads/S2
committer Name <name@example.com> 1112912893 -0400
data <<COMMIT
commit message
COMMIT
from :1M 100644 :103 hello.c
It is missing a newline and should be:
[...]
from :1
M 100644 :103 hello.c
What fast-import does is to produce a commit with the same
contents for hello.c as in refs/heads/S2^. What the buggy
program was expecting was the contents of blob :103. While
the resulting commit graph looked correct, the contents in
some commits were wrong.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if we even have a parameter before checking its value. Running
this command without any arguments may not make a lot of sense, but
reacting with a segmentation fault is unduly harsh.
While we're at it, avoid casting argv by declaring it const right away.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
