Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
The cache_tree_verify() method is run when GIT_TEST_CHECK_CACHE_TREE
is enabled, which it is by default in the test suite. The logic must
be adjusted for the presence of these directory entries.
For now, leave the test as a simple check for whether the directory
entry is sparse. Do not go any further until needed.
This allows us to re-enable GIT_TEST_CHECK_CACHE_TREE in
t1092-sparse-checkout-compatibility.sh. Further,
p2000-sparse-operations.sh uses the test suite and hence this is enabled
for all tests. We need to integrate with it before we run our
performance tests with a sparse-index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cache-tree extension was previously disabled with sparse indexes.
However, the cache-tree is an important performance feature for commands
like 'git status' and 'git add'. Integrate it with sparse directory
entries.
When writing a sparse index, completely clear and recalculate the cache
tree. By starting from scratch, the only integration necessary is to
check if we hit a sparse directory entry and create a leaf of the
cache-tree that has an entry_count of one and no subtrees.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have a full index, then we can convert it to a sparse index by
replacing directories outside of the sparse cone with sparse directory
entries. The convert_to_sparse() method does this, when the situation is
appropriate.
For now, we avoid converting the index to a sparse index if:
1. the index is split.
2. the index is already sparse.
3. sparse-checkout is disabled.
4. sparse-checkout does not use cone mode.
Finally, we currently limit the conversion to when the
GIT_TEST_SPARSE_INDEX environment variable is enabled. A mode using Git
config will be added in a later change.
The trickiest thing about this conversion is that we might not be able
to mark a directory as a sparse directory just because it is outside the
sparse cone. There might be unmerged files within that directory, so we
need to look for those. Also, if there is some strange reason why a file
is not marked with CE_SKIP_WORKTREE, then we should give up on
converting that directory. There is still hope that some of its
subdirectories might be able to convert to sparse, so we keep looking
deeper.
The conversion process is assisted by the cache-tree extension. This is
calculated from the full index if it does not already exist. We then
abandon the cache-tree as it no longer applies to the newly-sparse
index. Thus, this cache-tree will be recalculated in every
sparse-full-sparse round-trip until we integrate the cache-tree
extension with the sparse index.
Some Git commands use the index after writing it. For example, 'git add'
will update the index, then write it to disk, then read its entries to
report information. To keep the in-memory index in a full state after
writing, we re-expand it to a full one after the write. This is wasteful
for commands that only write the index and do not read from it again,
but that is only the case until we make those commands "sparse aware."
We can compare the behavior of the sparse-index in
t1092-sparse-checkout-compability.sh by using GIT_TEST_SPARSE_INDEX=1
when operating on the 'sparse-index' repo. We can also compare the two
sparse repos directly, such as comparing their indexes (when expanded to
full in the case of the 'sparse-index' repo). We also verify that the
index is actually populated with sparse directory entries.
The 'checkout and reset (mixed)' test is marked for failure when
comparing a sparse repo to a full repo, but we can compare the two
sparse-checkout cases directly to ensure that we are not changing the
behavior when using a sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This method will be helpful to use outside of cache-tree.c in a later
feature. The implementation is subtle due to subtree_name_cmp() sorting
by length and then lexicographically.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verify_cache() method takes an array of cache entries and a count,
but these are always provided directly from a struct index_state. Use
a pointer to the full structure instead.
There is a subtle point when istate->cache_nr is zero that subtracting
one will underflow. This triggers a failure in t0000-basic.sh, among
others. Use "i + 1 < istate->cache_nr" to avoid these strange
comparisons. Convert i to be unsigned as well, which also removes the
potential signed overflow in the unlikely case that cache_nr is over 2.1
billion entries. The 'funny' variable has a maximum value of 11, so
making it unsigned does not change anything of importance.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the method safer by allocating a cache_tree member for the given
index_state if it is not already present. This is preferrable to a
BUG() statement or returning with an error because future callers will
want to populate an empty cache-tree using this method.
Callers can also remove their conditional allocations of cache_tree.
Also drop local variables that can be found directly from the 'istate'
parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change reduced time spent in strlen() while comparing
consecutive paths in verify_cache(), but we can do better. The
conditional checks the existence of a directory separator at the correct
location, but only after doing a string comparison. Swap the order to be
logically equivalent but perform fewer string comparisons.
To test the effect on performance, I used a repository with over three
million paths in the index. I then ran the following command on repeat:
git -c index.threads=1 commit --amend --allow-empty --no-edit
Here are the measurements over 10 runs after a 5-run warmup:
Benchmark #1: v2.30.0
Time (mean ± σ): 854.5 ms ± 18.2 ms
Range (min … max): 825.0 ms … 892.8 ms
Benchmark #2: Previous change
Time (mean ± σ): 833.2 ms ± 10.3 ms
Range (min … max): 815.8 ms … 849.7 ms
Benchmark #3: This change
Time (mean ± σ): 815.5 ms ± 18.1 ms
Range (min … max): 795.4 ms … 849.5 ms
This change is 2% faster than the previous change and 5% faster than
v2.30.0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the name length field of cache entries instead of calculating its
value anew.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commands such as "git reset --hard" rebuild the in-memory representation
of the cache tree index extension by parsing tree objects starting at a
known root tree. The performance of this operation can vary widely
depending on the width and depth of the repository's working directory
structure. Measure the time in this operation using trace2 regions in
prime_cache_tree().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we write or read the cache tree index extension, it can be good to
isolate how much of the file I/O time is spent constructing this
in-memory tree from the existing index or writing it out again to the
new index file. Use trace2 regions to indicate that we are spending time
on this operation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches a trace_performance_enter()/trace_performance_leave() pair
added by 0d1ed59 (unpack-trees: add performance tracing, 2018-08-18).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow hash_object_file() to work on arbitrary repos by introducing a
git_hash_algo parameter. Change callers which have a struct repository
pointer in their scope to pass on the git_hash_algo from the said repo.
For all other callers, pass on the_hash_algo, which was already being
used internally at hash_object_file(). This functionality will be used
in the following patch to make check_object_signature() be able to work
on arbitrary repos (which, in turn, will be used to fix an
inconsistency at object.c:parse_object()).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify_one() takes a struct repository argument but uses the_hash_algo
internally. Replace it with the provided repo's git_hash_algo, for
consistency. For now, this is mainly a cosmetic change, as all callers
of this function currently only pass the_repository to it.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive machiery is one of the most complex parts of
the system that accumulated cruft over time. This large series
cleans up the implementation quite a bit.
* en/merge-recursive-cleanup: (26 commits)
merge-recursive: fix the fix to the diff3 common ancestor label
merge-recursive: fix the diff3 common ancestor label for virtual commits
merge-recursive: alphabetize include list
merge-recursive: add sanity checks for relevant merge_options
merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_*
merge-recursive: split internal fields into a separate struct
merge-recursive: avoid losing output and leaking memory holding that output
merge-recursive: comment and reorder the merge_options fields
merge-recursive: consolidate unnecessary fields in merge_options
merge-recursive: move some definitions around to clean up the header
merge-recursive: rename merge_options argument to opt in header
merge-recursive: rename 'mrtree' to 'result_tree', for clarity
merge-recursive: use common name for ancestors/common/base_list
merge-recursive: fix some overly long lines
cache-tree: share code between functions writing an index as a tree
merge-recursive: don't force external callers to do our logging
merge-recursive: remove useless parameter in merge_trees()
merge-recursive: exit early if index != head
Ensure index matches head before invoking merge machinery, round N
merge-recursive: remove another implicit dependency on the_repository
...
The cache-tree code has been taught to be less aggressive in
attempting to see if a tree object it computed already exists in
the repository.
* jt/cache-tree-avoid-lazy-fetch-during-merge:
cache-tree: do not lazy-fetch tentative tree
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
The cache-tree datastructure is used to speed up the comparison
between the HEAD and the index, and when the index is updated by
a cherry-pick (for example), a tree object that would represent
the paths in the index in a directory is constructed in-core, to
see if such a tree object exists already in the object store.
When the lazy-fetch mechanism was introduced, we converted this
"does the tree exist?" check into an "if it does not, and if we
lazily cloned, see if the remote has it" call by mistake. Since
the whole point of this check is to repair the cache-tree by
recording an already existing tree object opportunistically, we
shouldn't even try to fetch one from the remote.
Pass the OBJECT_INFO_SKIP_FETCH_OBJECT flag to make sure we only
check for existence in the local object store without triggering the
lazy fetch mechanism.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
[jc: rewritten the proposed log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths to walk tree objects have been audited for integer
overflows and hardened.
* jk/tree-walk-overflow:
tree-walk: harden make_traverse_path() length computations
tree-walk: add a strbuf wrapper for make_traverse_path()
tree-walk: accept a raw length for traverse_path_len()
tree-walk: use size_t consistently
tree-walk: drop oid from traverse_info
setup_traverse_info(): stop copying oid
write_tree_from_memory() appeared to be a merge-recursive special that
basically duplicated write_index_as_tree(). The two have a different
signature, but the bigger difference was just that write_index_as_tree()
would always unconditionally read the index off of disk instead of
working on the current in-memory index. So:
* split out common code into write_index_as_tree_internal()
* rename write_tree_from_memory() to write_inmemory_index_as_tree(),
make it call write_index_as_tree_internal(), and move it to
cache-tree.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the previous commit shows, the presence of an oid in each level of
the traverse_info is confusing and ultimately not necessary. Let's drop
it to make it clear that it will not always be set (as well as convince
us that it's unused, and let the compiler catch any merges with other
branches that do add new uses).
Since the oid is part of name_entry, we'll actually stop embedding a
name_entry entirely, and instead just separately hold the pathname, its
length, and the mode.
This makes the resulting code slightly more verbose as we have to pass
those elements around individually. But it also makes it more clear what
each code path is going to use (and in most of the paths, we really only
care about the pathname itself).
A few of these conversions are noisier than they need to be, as they
also take the opportunity to rename "len" to "namelen" for clarity
(especially where we also have "pathlen" or "ce_len" alongside).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In MS Visual C, the `DEBUG` constant is set automatically whenever
compiling with debug information.
This is clearly not what was intended in `cache-tree.c` nor in
`builtin/blame.c`, so let's use a less ambiguous name there.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.
* bc/tree-walk-oid:
cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
tree-walk: store object_id in a separate member
match-trees: use hashcpy to splice trees
match-trees: compute buffer offset correctly when splicing
tree-walk: copy object ID before use
When parsing a tree, we read the object ID directly out of the tree
buffer. This is normally fine, but such an object ID cannot be used with
oidcpy, which copies GIT_MAX_RAWSZ bytes, because if we are using SHA-1,
there may not be that many bytes to copy.
Instead, store the object ID in a separate struct member. Since we can
no longer efficiently compute the path length, store that information as
well in struct name_entry. Ensure we only copy the object ID into the
new buffer if the path length is nonzero, as some callers will pass us
an empty path with no object ID following it, and we will not want to
read past the end of the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining callers of has_sha1_file() actually have an object_id
already. They can use the "object" variant, rather than dereferencing
the hash themselves.
The code changes here were completely generated by the included
coccinelle patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We indent with TABs and sometimes for fine alignment, TABs followed by
spaces, but never all spaces (unless the indentation is less than 8
columns). Indenting with spaces slips through in some places. Fix
them.
Imported code and compat/ are left alone on purpose. The former should
remain as close as upstream as possible. The latter pretty much has
separate maintainers, it's up to them to decide.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a partial clone that will lazily be hydrated from the
originating repository, we generally want to avoid "does this
object exist (locally)?" on objects that we deliberately omitted
when we created the clone. The cache-tree codepath (which is used
to write a tree object out of the index) however insisted that the
object exists, even for paths that are outside of the partial
checkout area. The code has been updated to avoid such a check.
* jt/cache-tree-allow-missing-object-in-partial-clone:
cache-tree: skip some blob checks in partial clone
In a partial clone, whenever a sparse checkout occurs, the existence of
all blobs in the index is verified, whether they are included or
excluded by the .git/info/sparse-checkout specification. This
significantly degrades performance because a lazy fetch occurs whenever
the existence of a missing blob is checked.
This is because cache_tree_update() checks the existence of all objects
in the index, whether or not CE_SKIP_WORKTREE is set on them. Teach
cache_tree_update() to skip checking CE_SKIP_WORKTREE objects when the
repository is a partial clone. This improves performance for sparse
checkout and also other operations that use cache_tree_update().
Instead of completely removing the check, an argument could be made that
the check should instead be replaced by a check that the blob is
promised, but for performance reasons, I decided not to do this.
If the user needs to verify the repository, it can be done using fsck
(which will notify if a tree points to a missing and non-promised blob,
whether the blob is included or excluded by the sparse-checkout
specification).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added faster equality-comparison functions for hashes in
14438c4497 (introduce hasheq() and oideq(), 2018-08-28). A
few topics were in-flight at the time, and can now be
converted. This covers all spots found by "make coccicheck"
in master (the coccicheck results were tweaked by hand for
style).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The unpack_trees() API used in checking out a branch and merging
walks one or more trees along with the index. When the cache-tree
in the index tells us that we are walking a tree whose flattened
contents is known (i.e. matches a span in the index), as linearly
scanning a span in the index is much more efficient than having to
open tree objects recursively and listing their entries, the walk
can be optimized, which is done in this topic.
* nd/unpack-trees-with-cache-tree:
Document update for nd/unpack-trees-with-cache-tree
cache-tree: verify valid cache-tree in the test suite
unpack-trees: add missing cache invalidation
unpack-trees: reuse (still valid) cache-tree from src_index
unpack-trees: reduce malloc in cache-tree walk
unpack-trees: optimize walking same trees with cache-tree
unpack-trees: add performance tracing
trace.h: support nested performance tracing
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sure that cache-tree is consistent with the index. The main
purpose is to catch potential problems by saving the index in
unpack_trees() but the line in write_index() would also help spot
missing invalidation in other code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're going to optimize unpack_trees() a bit in the following
patches. Let's add some tracing to measure how long it takes before
and after. This is the baseline ("git checkout -" on webkit.git, 275k
files on worktree)
performance: 0.056651714 s: read cache .git/index
performance: 0.183101080 s: preload index
performance: 0.008584433 s: refresh index
performance: 0.633767589 s: traverse_trees
performance: 0.340265448 s: check_updates
performance: 0.381884638 s: cache_tree_update
performance: 1.401562947 s: unpack_trees
performance: 0.338687914 s: write index, changed mask = 2e
performance: 0.411927922 s: traverse_trees
performance: 0.000023335 s: check_updates
performance: 0.423697246 s: unpack_trees
performance: 0.423708360 s: diff-index
performance: 2.559524127 s: git command: git checkout -
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts update_main_cache_tree() and write_cache_as_tree() in the
same group of "index compat" functions that assume the_index
implicitly, which should only be used within builtin/ or t/helper.
sequencer.c is also updated to not use these functions. As of now, no
files outside builtin/ use these functions anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing an object ID against that of the empty tree, use the
is_empty_tree_oid function to ensure that we abstract over the hash
algorithm properly. In addition, this is more readable than a plain
oidcmp.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In various places throughout the codebase, we need to read data into a
struct object_id from a pack or other unsigned char buffer. Add an
inline function that does this based on the current hash algorithm in
use, and use it in several places.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the remaining portions of cache-tree.c to use struct object_id.
Convert several instances of 20 to use the_hash_algo instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert write_index_as_tree and write_cache_as_tree to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split-index mode had a few corner case bugs fixed.
* tg/split-index-fixes:
travis: run tests with GIT_TEST_SPLIT_INDEX
split-index: don't write cache tree with null oid entries
read-cache: fix reading the shared index for other repos
Junio C Hamano
Derrick Stolee
René Scharfe
Matheus Tavares
Jonathan Tan
Elijah Newren
Jeff King
Christian Couder
Jeff Hostetler
brian m. carlson
Nguyễn Thái Ngọc Duy
Stefan Beller