When pretend_object_file() is invoked with an object that does not exist
(as is the typical case), there is no need to fetch anything from the
promisor remote, because the caller already knows what the object is
supposed to contain. Therefore, suppress the fetch. (The
OBJECT_INFO_QUICK flag is added for the same reason.)
This was noticed at $DAYJOB when "blame" was run on a file that had
uncommitted modifications.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can already ask blame for full sha1s with "-l" or with
"--abbrev=40". But for consistency with other parts of Git,
we should support "--no-abbrev".
Worse, blame already accepts --no-abbrev, but it's totally
broken. When we see --no-abbrev, the abbrev variable is set
to 0, which is then used as a printf precision. For regular
sha1s, that means we print nothing at all (which is very
wrong). For boundary commits we decrement it to "-1", which
printf interprets as "no limit" (which is almost correct,
except it misses the 39-length magic explained in the
previous commit).
Let's detect --no-abbrev and behave as if --abbrev=40 was
given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The blame command internally adds 1 to any requested sha1
abbreviation length, and then subtracts it when outputting a
boundary commit. This lets regular and boundary sha1s line
up visually, but it misses one corner case.
When the requested length is 40, we bump the value to 41.
But since we only have 40 characters, that's all we can show
(fortunately the truncation is done by a printf precision
field, so it never tries to read past the end of the
buffer). So a normal sha1 shows 40 hex characters, and a
boundary sha1 shows "^" plus 40 hex characters. The result
is misaligned.
The "-l" option to show long sha1s gets around this by
skipping the "abbrev" variable entirely and just always
using GIT_SHA1_HEXSZ. This avoids the "+1" issue, but it
does mean that boundary commits only have 39 characters
printed. This is somewhat odd, but it does look good
visually: the results are aligned and left-justified. The
alternative would be to allocate an extra column that would
contain either an extra space or the "^" boundary marker.
As this is by definition the human-readable view, it's
probably not that big a deal either way (and of course
--porcelain, etc, correctly produce correct 40-hex sha1s).
But for consistency, this patch teaches --abbrev=40 to
produce the same output as "-l" (always left-aligned, with
40-hex for normal sha1s, and "^" plus 39-hex for
boundaries).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3b75ee9 ("blame: allow to blame paths freshly added to the index",
2016-07-16) git blame also looks at the index to determine if there is a
file that was freshly added to the index.
cache_name_pos returns -pos - 1 in case there is no match is found, or
if the name matches, but the entry has a stage other than 0. As git
blame should work for unmerged files, it uses strcmp to determine
whether the name of the returned position matches, in which case the
file exists, but is merely unmerged, or if the file actually doesn't
exist in the index.
If the repository is empty, or if the file would lexicographically be
sorted as the last file in the repository, -cache_name_pos - 1 is
outside of the length of the active_cache array, causing git blame to
segfault. Guard against that, and die() normally to restore the old
behaviour.
Reported-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complement existing --show-email option with fallback
configuration variable, with tests.
Signed-off-by: Quentin Neill <quentin.neill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular,
- indent with tabs
- cuddle test description and opening body quote with test_expect_foo
- normalize test descriptions and case
- remove whitepsace following redirection operator
- use standardized filenames (such as "actual", "expected")
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option -e (or --show-email) to git-blame that will display
the author's email instead of name on each line. This option works
for both git-blame and git-annotate.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just I am old fashioned. Source inclusion in bourne shell is
"." (dot), not "source" -- that's csh.
[jc: yes I know bash groks it, but I am old fashioned.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jonathan Tan
Matthew DeVore
Jeff King
Thomas Gummerer
Quentin Neill
Eric Sunshine
Josh Stone
Kevin Ballard
Junio C Hamano
Junio C Hamano
Fredrik Kuivinen