Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
This field has not been used since the function was introduced in
b559263216 (exclude: split pathname matching code into a separate
function, 2012-10-15), though there was a brief period where it was
erroneously used and then reverted in ed4958477b (dir: fix pattern
matching on dirs, 2021-09-24) and 5ceb663e92 (dir: fix
directory-matching bug, 2021-11-02).
It's possible we'd eventually add a flag that makes it useful here, but
there are only a handful of callers. It would be easy to add back if
necessary, and in the meantime this makes the function interface less
misleading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a non-bare repository, the behavior of Git when the
core.worktree configuration variable points at a directory that has
a repository as its subdirectory, regressed in Git 2.27 days.
* gg/worktree-from-the-above:
dir: minor refactoring / clean-up
dir: traverse into repository
Narrow the scope of the `nested_repo` variable and conditional return
statement to the block where the variable is set.
Signed-off-by: Goss Geppert <ggossdev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8d92fb2927 (dir: replace exponential algorithm with a linear one,
2020-04-01) traversing into a repository's directory tree when the
traversal began outside the repository's standard location has failed
because the encountered repository was identified as a nested foreign
repository.
Prior to this commit, the failure to traverse into a repository's
default worktree location was observable from a user's perspective under
either of the following conditions (there may be others):
1) Set the `core.worktree` location to a parent directory of the
default worktree; or
2) Use the `--git_dir` option while the working directory is outside
the repository's default worktree location
Under either of these conditions, symptoms of the failure to traverse
into the repository's default worktree location include the inability to
add files to the index or get a list of untracked files via ls-files.
This commit adds a check to determine whether a nested repository that
is encountered in recursing a path is actually `the_repository`. If so,
we simply treat the directory as if it doesn't contain a nested
repository.
The commit includes test-cases to reduce the likelihood of future
regressions.
Signed-off-by: Goss Geppert <ggossdev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preliminary code refactoring around transport and bundle code.
* ds/bundle-uri:
bundle.h: make "fd" version of read_bundle_header() public
remote: allow relative_url() to return an absolute url
remote: move relative_url()
http: make http_get_file() external
fetch-pack: move --keep=* option filling to a function
fetch-pack: add a deref_without_lazy_fetch_extended()
dir API: add a generalized path_match_flags() function
connect.c: refactor sending of agent & object-format
Fixes real problems noticed by gcc 12 and works around false
positives.
* js/ci-gcc-12-fixes:
dir.c: avoid "exceeds maximum object size" error with GCC v12.x
nedmalloc: avoid new compile error
compat/win32/syslog: fix use-after-realloc
Technically, the pointer difference `end - start` _could_ be negative,
and when cast to an (unsigned) `size_t` that would cause problems. In
this instance, the symptom is:
dir.c: In function 'git_url_basename':
dir.c:3087:13: error: 'memchr' specified bound [9223372036854775808, 0]
exceeds maximum object size 9223372036854775807
[-Werror=stringop-overread]
CC ewah/bitmap.o
3087 | if (memchr(start, '/', end - start) == NULL
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While it is a bit far-fetched to think that `end` (which is defined as
`repo + strlen(repo)`) and `start` (which starts at `repo` and never
steps beyond the NUL terminator) could result in such a negative
difference, GCC has no way of knowing that.
See also https://gcc.gnu.org/bugzilla//show_bug.cgi?id=85783.
Let's just add a safety check, primarily for GCC's benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
Add a path_match_flags() function and have the two sets of
starts_with_dot_{,dot_}slash() functions added in
63e95beb08 (submodule: port resolve_relative_url from shell to C,
2016-04-15) and a2b26ffb1a (fsck: convert gitmodules url to URL
passed to curl, 2020-04-18) be thin wrappers for it.
As the latter of those notes the fsck version was copied from the
initial builtin/submodule--helper.c version.
Since the code added in a2b26ffb1a was doing really doing the same as
win32_is_dir_sep() added in 1cadad6f65 (git clone <url>
C:\cygwin\home\USER\repo' is working (again), 2018-12-15) let's move
the latter to git-compat-util.h is a is_xplatform_dir_sep(). We can
then call either it or the platform-specific is_dir_sep() from this
new function.
Let's likewise change code in various other places that was hardcoding
checks for "'/' || '\\'" with the new is_xplatform_dir_sep(). As can
be seen in those callers some of them still concern themselves with
':' (Mac OS classic?), but let's leave the question of whether that
should be consolidated for some other time.
As we expect to make wider use of the "native" case in the future,
define and use two starts_with_dot_{,dot_}slash_native() convenience
wrappers. This makes the diff in builtin/submodule--helper.c much
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Untracked cache was originally designed to only work with
"--untracked-files=normal", and is bypassed when
"--untracked-files=all" is requested, but this causes performance
issues for UI tooling that wants to see "all" on a frequent basis.
On the other hand, the conditions that altogether prevented
applicability to the "all" mode no longer seem to apply, after
several major refactors in recent years; this possibility was
discussed in
81153d02-8e7a-be59-e709-e90cd5906f3a@jeffhostetler.com and
CABPp-BFiwzzUgiTj_zu+vF5x20L0=1cf25cHwk7KZQj2YkVzXw@mail.gmail.com,
and somewhat confirmed experimentally by several users using a
version of this patch to use untracked cache with -uall for about a
year.
When 'git status' runs without using the untracked cache, on a large
repo, on windows, with fsmonitor, it can run very slowly. This can
make GUIs that need to use "-uall" (and therefore currently bypass
untracked cache) unusable when fsmonitor is enabled, on such large
repos.
To partially address this, align the supported directory flags for the
stored untracked cache data with the git config. If a user specifies
an '--untracked-files=' commandline parameter that does not align with
their 'status.showuntrackedfiles' config value, then the untracked
cache will be ignored - as it is for other unsupported situations like
when a pathspec is specified.
If the previously stored flags no longer match the current
configuration, but the currently-applicable flags do match the current
configuration, then discard the previously stored untracked cache
data.
For most users there will be no change in behavior. Users who need
'--untracked-files=all' to perform well will now have the option of
setting "status.showuntrackedfiles" to "all" for better / more
consistent performance.
Users who need '--untracked-files=all' to perform well for their
tooling AND prefer to avoid the verbosity of "all" when running
git status explicitly without options... are out of luck for now (no
change).
Users who have the "status.showuntrackedfiles" config set to "all"
and yet frequently explicitly call
'git status --untracked-files=normal' (and use the untracked cache)
are the only ones who will be disadvantaged by this change. Their
"--untracked-files=normal" calls will, after this change, no longer
use the untracked cache.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree" has been made to be aware of the sparse-index
feature.
* vd/sparse-read-tree:
read-tree: make three-way merge sparse-aware
read-tree: make two-way merge sparse-aware
read-tree: narrow scope of index expansion for '--prefix'
read-tree: integrate with sparse index
read-tree: expand sparse checkout test coverage
read-tree: explicitly disallow prefixes with a leading '/'
status: fix nested sparse directory diff in sparse index
sparse-index: prevent repo root from becoming sparse
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
The untracked cache newly computed weren't written back to the
on-disk index file when there is no other change to the index,
which has been corrected.
* tk/empty-untracked-cache:
untracked-cache: write index when populating empty untracked cache
t7519: populate untracked cache before test
t7519: avoid file to index mtime race for untracked cache
Prevent the repository root from being collapsed into a sparse directory by
treating an empty path as "inside the sparse-checkout". When collapsing a
sparse index (e.g. in 'git sparse-checkout reapply'), the root directory
typically could not become a sparse directory due to the presence of in-cone
root-level files and directories. However, if no such in-cone files or
directories were present, there was no explicit check signaling that the
"repository root path" (an empty string, in the case of
'convert_to_sparse(...)') was in-cone, and a sparse directory index entry
would be created from the repository root directory.
The documentation in Documentation/git-sparse-checkout.txt explicitly states
that the files in the root directory are expected to be in-cone for a
cone-mode sparse-checkout. Collapsing the root into a sparse directory entry
violates that assumption, as sparse directory entries are expected to be
outside the sparse cone and have SKIP_WORKTREE enabled. This invalid state
in turn causes issues with commands that interact with the index, e.g.
'git status'.
Treating an empty (root) path as in-cone prevents the creation of a root
sparse directory in 'convert_to_sparse(...)'. Because the repository root is
otherwise never compared with sparse patterns (in both cone-mode and
non-cone sparse-checkouts), the new check does not cause additional changes
to how sparse patterns are applied.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is expected that an empty/unpopulated untracked cache structure can
be written to the index - by update-index, or by a "git status" call
that sees the untracked cache should be enabled and is not, but is
running with options that make the untracked cache non-applicable in
that run (eg a pathspec).
Currently, if that happens, then subsequent "git status" calls end up
populating the untracked cache, but not writing the index (not saving
their work) - so the performance outcome is almost identical to the
cache being altogether disabled.
This continues until the index gets written with the untracked cache
populated, for some *other* reason, such as a working tree change.
Detect the condition where an empty untracked cache exists in the
index and we will collect the list of untracked paths, and queue an
index write under that condition, so that the collected untracked
paths can be written out to the untracked cache extension in the
index.
This change depends on previous fixes to t7519 for the "ignore .git
changes when invalidating UNTR" test case to pass - before this fix,
the test never actually did anything as it was not set up correctly.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hash_object_file() function to take an "enum
object_type".
Since a preceding commit all of its callers are passing either
"{commit,tree,blob,tag}_type", or the result of a call to type_name(),
the parse_object() caller that would pass NULL is now using
stream_object_signature().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_FORCE_UNTRACKED_CACHE environment variable writes the untracked
cache more frequently than the core.untrackedCache config variable. This
is due to how read_directory() handles the creation of an untracked
cache.
Before this change, Git would not create the untracked cache extension
for an index that did not already have one. Users would need to run a
command such as 'git update-index --untracked-cache' before the index
would actually contain an untracked cache.
In particular, users noticed that the untracked cache would not appear
even with core.untrackedCache=true. Some users reported setting
GIT_FORCE_UNTRACKED_CACHE=1 in their engineering system environment to
ensure the untracked cache would be created.
The decision to not write the untracked cache without an environment
variable tracks back to fc9ecbeb9 (dir.c: don't flag the index as dirty
for changes to the untracked cache, 2018-02-05). The motivation of that
change is that writing the index is expensive, and if the untracked
cache is the only thing that needs to be written, then it is more
expensive than the benefit of the cache. However, this also means that
the untracked cache never gets populated, so the user who enabled it via
config does not actually get the extension until running 'git
update-index --untracked-cache' manually or using the environment
variable.
We have had a version of this change in the microsoft/git fork for a few
major releases now. It has been working well to get users into a good
state. Yes, that first index write is slow, but the remaining index
writes are much faster than they would be without this change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
When in cone mode sparse-checkout, it is unclear how 'git
sparse-checkout add <dir1> ...' should behave if the existing
sparse-checkout file does not match the cone mode patterns. Change the
behavior to fail with an error message about the existing patterns.
Also, all cone mode patterns start with a '/' character, so add that
restriction. This is necessary for our example test 'cone mode: warn on
bad pattern', but also requires modifying the example sparse-checkout
file we use to test the warnings related to recognizing cone mode
patterns.
This error checking would cause a failure further down the test script
because of a test that adds non-cone mode patterns without cleaning them
up. Perform that cleanup as part of the test now.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Then core.sparseCheckoutCone is enabled, the sparse-checkout patterns are
used to populate two hashsets that accelerate pattern matching. If the user
modifies the sparse-checkout file outside of the 'sparse-checkout' builtin,
then strange patterns can happen, triggering some error checks.
One of these error checks is possible to hit when some special characters
exist in a line. A warning message is correctly written to stderr, but then
there is additional logic that attempts to remove the line from the hashset
and free the data. This leads to a segfault in the 'git sparse-checkout
list' command because it iterates over the contents of the hashset, which is
now invalid.
The fix here is to stop trying to remove from the hashset. In addition,
we disable cone mode sparse-checkout because of the malformed data. This
results in the pattern-matching working with a possibly-slower
algorithm, but using the patterns as they are in the sparse-checkout
file.
This also changes the behavior of commands such as 'git sparse-checkout
list' because the output patterns will be the contents of the
sparse-checkout file instead of the list of directories. This is an
existing behavior for other types of bad patterns.
Add a test that triggers the segfault without the code change.
Reported-by: John Burnett <johnburnett@johnburnett.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_dir_recurse(), and its non-static wrapper called
remove_dir_recursively(), both take flags for modifying its behavior.
As with the previous commits, we would generally like to protect
the original_cwd, but we want to forced user commands (e.g. 'git rm -rf
...') or other special cases to remove it. Add a flag for this purpose.
After reading through every caller of remove_dir_recursively() in the
current codebase, there was only one that should be adjusted and that
one only in a very unusual circumstance. Add a pair of new testcases to
highlight that very specific case involving submodules && --git-dir &&
--work-tree.
Acked-by: Derrick Stolee <stolee@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern git often tries to avoid leaving empty directories around when
removing files. Originally, it did not bother. This behavior started
with commit 80e21a9ed8 (merge-recursive::removeFile: remove empty
directories, 2005-11-19), stating the reason simply as:
When the last file in a directory is removed as the result of a
merge, try to rmdir the now-empty directory.
This was reimplemented in C and renamed to remove_path() in commit
e1b3a2cad7 ("Build-in merge-recursive", 2008-02-07), but was still
internal to merge-recursive.
This trend towards removing leading empty directories continued with
commit d9b814cc97 (Add builtin "git rm" command, 2006-05-19), which
stated the reasoning as:
The other question is what to do with leading directories. The old
"git rm" script didn't do anything, which is somewhat inconsistent.
This one will actually clean up directories that have become empty
as a result of removing the last file, but maybe we want to have a
flag to decide the behaviour?
remove_path() in dir.c was added in 4a92d1bfb7 (Add remove_path: a
function to remove as much as possible of a path, 2008-09-27), because
it was noted that we had two separate implementations of the same idea
AND both were buggy. It described the purpose of the function as
a function to remove as much as possible of a path
Why remove as much as possible? Well, at the time we probably would
have said something like:
* removing leading directories makes things feel tidy
* removing leading directories doesn't hurt anything so long as they
had no files in them.
But I don't believe those reasons hold when the empty directory happens
to be the current working directory we inherited from our parent
process. Leaving the parent process in a deleted directory can cause
user confusion when subsequent processes fail: any git command, for
example, will immediately fail with
fatal: Unable to read current working directory: No such file or directory
Other commands may similarly get confused. Modify remove_path() so that
the empty leading directories it also deletes does not include the
current working directory we inherited from our parent process. I have
looked through every caller of remove_path() in the current codebase to
make sure that all should take this change.
Acked-by: Derrick Stolee <stolee@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f6526728f9.
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts the change from ed49584 (dir: fix pattern matching on dirs,
2021-09-24), which claimed to fix a directory-matching problem without a
test case. It turns out to _create_ a bug, but it is a bit subtle.
The bug would have been revealed by the first of two tests being added to
t0008-ignores.sh. The first uses a pattern "/git/" inside the a/.gitignores
file, which matches against 'a/git/foo' but not 'a/git-foo/bar'. This test
would fail before the revert.
The second test shows what happens if the test instead uses a pattern "git/"
and this test passes both before and after the revert.
The difference in these two cases are due to how
last_matching_pattern_from_list() checks patterns both if they have the
PATTERN_FLAG_MUSTBEDIR and PATTERN_FLAG_NODIR flags. In the case of "git/",
the PATTERN_FLAG_NODIR is also provided, making the change in behavior in
match_pathname() not affect the end result of
last_matching_pattern_from_list().
Reported-by: Glen Choo <chooglen@google.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three commands recently learned to avoid updating paths outside
the sparse checkout even if they are missing the SKIP_WORKTREE bit. This
is done using path_in_sparse_checkout(), which checks whether a given
path matches the current list of sparsity rules, similar to what
clear_ce_flags() does when we run "git sparse checkout init" or "git
sparse-checkout reapply". However, clear_ce_flags() uses a recursive
approach, applying the match results from parent directories on paths
that get the UNDECIDED result, whereas path_in_sparse_checkout() only
attempts to match the full path and immediately considers UNDECIDED as
NOT_MATCHED. This makes the function miss matches with leading
directories. For example, if the user has the sparsity patterns "!/a"
and "b/", add, rm, and mv will fail to update the path "a/b/c" and end
up displaying a warning about it being outside the sparse checkout even
though it isn't. This problem only occurs in full pattern mode as the
pattern matching functions never return UNDECIDED for cone mode.
To fix this, replicate the recursive behavior of clear_ce_flags() in
path_in_sparse_checkout(), falling back to the parent directory match
when a path gets the UNDECIDED result. (If this turns out to be too
expensive in some cases, we may want to later add some form of caching
to accelerate multiple queries within the same directory. This is not
implemented in this patch, though.) Also add two tests for each affected
command (add, rm, and mv) to check that they behave correctly with the
recursive pattern matching. The first test would previously fail without
this patch while the second already succeeded. It is added mostly to
make sure that we are not breaking the existing pattern matching for
directories that are really sparse, and also as a protection against any
future regressions.
Two other existing tests had to be changed as well: one test in t3602
checks that "git rm -r <dir>" won't remove sparse entries, but it didn't
allow the non-sparse entries inside <dir> to be removed. The other one,
in t7002, tested that "git mv" would correctly display a warning message
for sparse paths, but it accidentally expected the message to include
two non-sparse paths as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
Within match_pathname(), one successful matching category happens when
the pattern is equal to its non-wildcard prefix. At this point, we have
checked that the input 'pathname' matches the pattern up to the prefix
length, and then we subtraced that length from both 'patternlen' and
'namelen'.
In the case of a directory match, this prefix match should be
sufficient. However, the success condition only cared about _exact_
equality here. Instead, we should allow any path that agrees on this
prefix in the case of PATTERN_FLAG_MUSTBEDIR.
This case was not tested before because of the way unpack_trees() would
match a parent directory before visiting the contained paths. This
approach is changing, so we must change this comparison.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When matching a path against a list of patterns, the ones that require a
directory match previously did not work when a filename is specified.
This was fine when all pattern-matching was done within methods such as
unpack_trees() that check a directory before recursing into the
contained files. However, other commands will start matching individual
files against pattern lists without that recursive approach.
The last_matching_pattern_from_list() logic performs some checks on the
filetype of a path within the index when the PATTERN_FLAG_MUSTBEDIR flag
is set. This works great when setting SKIP_WORKTREE bits within
unpack_trees(), but doesn't work well when passing an arbitrary path
such as a file within a matching directory.
We extract the logic around determining the file type, but attempt to
avoid checking the filesystem if the parent directory already matches
the sparse-checkout patterns. The new path_matches_dir_pattern() method
includes a 'path_parent' parameter that is used to store the parent
directory of 'pathname' between multiple pattern matching tests. This is
loaded lazily, only on the first pattern it finds that has the
PATTERN_FLAG_MUSTBEDIR flag.
If we find that a path has a parent directory, we start by checking to
see if that parent directory matches the pattern. If so, then we do not
need to query the index for the type (which can be expensive). If we
find that the parent does not match, then we still must check the type
from the index for the given pathname.
Note that this does not affect cone mode pattern matching, but instead
the more general -- and slower -- full pattern set. Thus, this does not
affect the sparse index.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
We currently store each submodule gitdir in ".git/modules/<name>", but
this has problems with some submodule naming schemes, as described in a
comment in submodule_name_to_gitdir() in this patch.
Extract the determination of the location of a submodule's gitdir into
its own function submodule_name_to_gitdir(). For now, the problem
remains unsolved, but this puts us in a better position for finding a
solution.
This was motivated, at $DAYJOB, by a part of Android's repo hierarchy
[1]. In particular, there is a repo "build", and several repos of the
form "build/<name>".
This is based on earlier work by Brandon Williams [2].
[1] https://android.googlesource.com/platform/
[2] https://lore.kernel.org/git/20180808223323.79989-2-bmwill@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we integrate the sparse index into more builtins, we occasionally
need to check the sparse-checkout patterns to see if a path is within
the sparse-checkout cone. Create some helper methods that help
initialize the patterns and check for pattern matching to make this
easier.
The existing callers of commands like get_sparse_checkout_patterns() use
a custom 'struct pattern_list' that is not necessarily the one in the
'struct index_state', so there are not many previous uses that could
adopt these helpers. There are just two in builtin/add.c and
sparse-index.c that can use path_in_sparse_checkout().
We add a path_in_cone_mode_sparse_checkout() as well that will only
return false if the path is outside of the sparse-checkout definition
_and_ the sparse-checkout patterns are in cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions can be useful to other parts of Git. Let's move them to
dir.c, while renaming them to be make their functionality more explicit.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduced the function fspathhash() for calculating path hashes while
respecting the configuration option core.ignorecase. Call it instead of
open-coding it; the resulting code is shorter and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
Optimization for repositories with many alternate object store.
* ew/many-alternate-optim:
oidtree: a crit-bit tree for odb_loose_cache
oidcpy_with_padding: constify `src' arg
make object_directory.loose_objects_subdir_seen a bitmap
avoid strlen via strbuf_addstr in link_alt_odb_entry
speed up alt_odb_usable() with many alternates
When we have sparse directory entries in the index, we want to compare
that directory against sparse-checkout patterns. Those pattern matching
algorithms are built expecting a file path, not a directory path. This
is especially important in the "cone mode" patterns which will match
files that exist within the "parent directories" as well as the
recursive directory matches.
If path_matches_pattern_list() is given a directory, we can add a fake
filename ("-") to the directory and get the same results as before,
assuming we are in cone mode. Since sparse index requires cone mode
patterns, this is an acceptable assumption.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With many alternates, the duplicate check in alt_odb_usable()
wastes many cycles doing repeated fspathcmp() on every existing
alternate. Use a khash to speed up lookups by odb->path.
Since the kh_put_* API uses the supplied key without
duplicating it, we also take advantage of it to replace both
xstrdup() and strbuf_release() in link_alt_odb_entry() with
strbuf_detach() to avoid the allocation and copy.
In a test repository with 50K alternates and each of those 50K
alternates having one alternate each (for a total of 100K total
alternates); this speeds up lookup of a non-existent blob from
over 16 minutes to roughly 2.7 seconds on my busy workstation.
Note: all underlying git object directories were small and
unpacked with only loose objects and no packs. Having to load
packs increases times significantly.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the dir_init() function and replace it with a DIR_INIT
macro. In many cases in the codebase we need to initialize things with
a function for good reasons, e.g. needing to call another function on
initialization. The "dir_init()" function was not one such case, and
could trivially be replaced with a more idiomatic macro initialization
pattern.
The only place where we made use of its use of memset() was in
dir_clear() itself, which resets the contents of an an existing struct
pointer. Let's use the new "memcpy() a 'blank' struct on the stack"
idiom to do that reset.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix-up to a topic that is already in 'master'.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
Revert "dir: update stale description of treat_directory()"
Revert "dir: introduce readdir_skip_dot_and_dotdot() helper"
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Jeff King
Goss Geppert
Johannes Schindelin
Ævar Arnfjörð Bjarmason
Tao Klerks
Victoria Dye
Derrick Stolee
Derrick Stolee
Elijah Newren
Matheus Tavares
Jonathan Tan
Atharva Raykar
René Scharfe
Eric Wong