If you want to reuse the rerere cache in another repository, and set
a symbolic link to it, you do not want to have the two repositories
interfer with each other by accessing the _same_ MERGE_RR.
For example, if you use contrib/git-new-workdir to set up a second
working directory, and you have a conflict in one working directory,
but commit in the other working directory first, the wrong "resolution"
will be recorded.
The easy solution is to move MERGE_RR out of the rr-cache/ directory,
which also corresponds with the notion that rr-cache/ contains cached
resolutions, not some intermediate temporary states.
Noticed by Kalle Olavi Niemitalo.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test created an initial commit, made .git/objects unwritable and then
exercised various codepaths to create loose commit, tree and blob objects
to make sure the commands notice failures from these attempts.
However, the initial commit was not preceded with test_tick, which made
its object name depend on the timestamp. The names of all the later tree
and blob objects the test tried to create were static. If the initial
commit's object name happened to begin with the same two hexdigits as the
tree or blob objects the test later attempted to create, the fan-out
directory in which these tree or blob would be created is already created
when the initial commit was made, and the object creation succeeds, and
commands being tested should not notice any failure --- in short, the test
was bogus.
This makes the fan-out directories also unwritable, and adds test_tick
before the commit object creation to make the test repeatable.
The contents of the file to create a blob from "a" to "60" is to force the
name of the blob object to begin with "1b", which shares the fan-out
directory with the initial commit that is created with the test. This was
useful when diagnosing the breakage of this test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
using git-init as directory name confused 'make remove-dashes', so just
drop the 'git-' prefix.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
06cbe85 (Make core.sharedRepository more generic, 2008-04-16) broke the
traditional setting of core.sharedRepository to true, which was to make
the repository group writable: with umask 022, it would clear the
permission bits for 'other'. (umask 002 did not exhibit this behaviour
since pre-chmod() check in adjust_shared_perm() fails in that case.)
The call to adjust_shared_perm() should only loosen the permission.
If the user has umask like 022 or 002 that allow others to read, the
resulting files should be made readable and writable by group, without
restricting the readability by others.
This patch fixes the adjust_shared_perm() mode tweak based on Junio's
suggestion and adds the appropriate tests to t/t1301-shared-repo.sh.
Cc: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a conflicting file contains a line that begin with "=======", rerere
failed to parse conflict markers. This result to a wrong preimage file and
an unexpected error for the user. The boundary between ours and theirs
not just begin with 7 equals, but is followed by either a SP or a LF.
This patch enforces parsing rules so that markers match in the right order,
and when ambiguous, the command does not autoresolve the conflicted file.
Especially because we are introducing rerere.autoupdate configuration
(which is off by default for safety) that automatically stages the
resolution made by rerere, it is necessary to make sure that we do not
autoresolve when there is any ambiguity.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7ebd52a (Merge branch 'dz/apply-again', 2008-07-01) taught "git-apply" to
grok a (non-git) patch that is a concatenation of separate patches that
touch the same file number of times, by recording the postimage of patch
application of previous round and using it as the preimage for later
rounds.
This "incremental" mode of patch application fundamentally contradicts
with the way git rename/copy patches are designed. When a git patch talks
about a file A getting modified, and a new file B created out of A, like
this:
diff --git a/A b/A
--- a/A
+++ b/A
... change text here ...
diff --git a/A b/B
copy from A
copy to B
--- a/A
+++ b/B
... change text here ...
the second change to produce B does not depend on what is done to A with
the first change in any way. This is explicitly done so for reviewability
of individual patches.
With this commit, we do not look at 'fn_table' that records the postimage
of previous round when applying a patch to produce a new file out of an
existing file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/apply-root:
git-apply --directory: make --root more similar to GNU diff
apply --root: thinkofix.
Teach "git apply" to prepend a prefix with "--root=<root>"
When setting the GIT_SVN_LC_ALL variable, default to the $LANG
environment variable, when the $LC_ALL override is not set.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently this test simply exits without providing any
feedback at all. Tell user if the test is being skipped
and provide a hint as to how the test may be enabled.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing release notes for 1.5.6.3
git-submodule - Fix bugs in adding an existing repo as a module
bash: offer only paths after '--'
Remove unnecessary pack-*.keep file after successful git-clone
make deleting a missing ref more quiet
On some setups, apache will say:
apache2: Could not reliably determine the server's fully qualified
domain name, using $(IP_address) for ServerName
Avoid this message polluting tests output by setting a ServerName in
apache configuration.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When USE_CURL_MULTI is undefined, git http-push doesn't work, so it's
useless to test it.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push test has been broken by 4a7aaccd adding a space character
in the place where the test is being run.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git http-push doesn't handle packed-refs, and now the new builtin-clone
created packed refs, the http-push test fails.
Mark the current failure as such, and also catch third test's failure
that went unreported because git push doesn't return an error code when
it says:
No refs in common and none specified; doing nothing.
Which it does when http-push can't get a list of refs recursively from
$URL/refs/.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unpacked objects should receive the timestamp of the pack they were
unpacked from. Check.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once a clone is successful we no longer need to hold onto the
.keep file created by the transport. Delete the file so we
can later repack the complete repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user specifies a ref by a reflog entry older than
one we have (e.g., "HEAD@{20 years ago"}), we issue a
warning and give them the "from" value of the oldest reflog
entry. That is, we say "we don't know what happened before
this entry, but before this we know we had some particular
SHA1".
However, the oldest reflog entry is often a creation event
such as clone or branch creation. In this case, the entry
claims that the ref went from "00000..." (the null sha1) to
the new value, and the reflog lookup returns the null sha1.
While this is technically correct (the entry tells us that
the ref didn't exist at the specified time) it is not
terribly useful to the end user. What they probably want
instead is "the oldest useful sha1 that this ref ever had".
This patch changes the behavior such that if the oldest ref
would return the null sha1, it instead returns the first
value the ref ever had.
We never discovered this problem in the test scripts because
we created "fake" reflogs that had only a specified segment
of history. This patch updates the tests with a creation
event at the beginning of history.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git attempts to delete a ref, but the unlink of the ref
file fails, we print a message to stderr. This is usually a
good thing, but if the error is ENOENT, then it indicates
that the ref has _already_ been deleted. And since that's
our goal, it doesn't make sense to complain to the user.
This harmonizes the error reporting behavior for the
unpacked and packed cases; the packed case already printed
nothing on ENOENT, but the unpacked printed unconditionally.
Additionally, send-pack would, when deleting the tracking
ref corresponding to a remote delete, print "Failed to
delete" on any failure. This can be a misleading
message, since we actually _did_ delete at the remote side,
but we failed to delete locally. Rather than make the
message more precise, let's just eliminate it entirely; the
delete_ref routine already takes care of printing out a much
more specific message about what went wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A root commit couldn't be cherry-picked. But its semantics can be
defined as simply merging two trees by overlaying disjoint parts
and merging overlapping files without any common ancestor. You
should be able to rebase originally independent branches on top of
another branch by using this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
Make sure that applying the stash to a new branch after a conflicting
change doesn't result in an error when you try to commit.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Applying a patch in the directory that is different from what the patch
records is done with --directory option in GNU diff. The --root option we
introduced previously does the same, and we can call it the same way to
give users more familiar feel.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test failed on AIX (and likely other OS, such as apparently OSX)
where wc -l outputs whitespace.
Also, avoid unnecessary eval in conflict_count().
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no test for this before, so the testsuite passed, even in case
the merge summary was missing from the merge commit message.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a patch modifies the last line of a file that previously had no
terminating '\n', it looks like
-old text
\ No newline at end of file
+new text
Hence, a '\' line does not signal the end of the hunk. This modifies
'git apply --recount' to take this into account.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When left-right traversal counts the commits in a diverged history, it
leaves the flags in the commits smudged, and we need to clear them before
we return. Otherwise the caller cannot inspect other branches with this
function again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we match a lightweight (non-annotated tag) as the name to
output and --long was requested we do not have a tag, nor do
we have a tagged object to display. Instead we must use the
object we were passed as input for the long format display.
Reported-by: Mark Burton <markb@ordern.com>
Backtraced-by: Mikael Magnusson <mikachu@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a new option 'e' to the 'add -p' command loop that lets you edit
the current hunk in your favourite editor.
If the resulting patch applies cleanly, the edited hunk will
immediately be marked for staging. If it does not apply cleanly, you
will be given an opportunity to edit again. If all lines of the hunk
are removed, then the edit is aborted and the hunk is left unchanged.
Applying the changed hunk(s) relies on Johannes Schindelin's new
--recount option for git-apply.
Note that the "real patch" test intentionally uses
(echo e; echo n; echo d) | git add -p
even though the 'n' and 'd' are superfluous at first sight. They
serve to get out of the interaction loop if git add -p wrongly
concludes the patch does not apply.
Many thanks to Jeff King <peff@peff.net> for lots of help and
suggestions.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The end of a string is string[length-1], not string[length+1].
I pointed it out during the review, but I forgot about it when applying the
patch. This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git apply --root=<root>", all file names in the patch are prepended
with <root>. If a "-p" value was given, the paths are stripped _before_
prepending <root>.
Wished for by HPA.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkdiff:
Fix t4017-diff-retval for white-space from wc
Update sample pre-commit hook to use "diff --check"
diff --check: detect leftover conflict markers
Teach "diff --check" about new blank lines at end
checkdiff: pass diff_options to the callback
check_and_emit_line(): rename and refactor
diff --check: explain why we do not care whether old side is binary
The old shell version used show-branch --independent to filter for the
ones that cannot be reached from any other reference.
The new C version uses reduce_heads() from commit.c for this, so
add test to ensure it works as expected.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old shell version handled only 25 refs but we no longer have this
limitation. Add a test to make sure this limitation will not be
introduced again in the future.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test if the given strategies are used and test the case when multiple
strategies are configured using a space separated list.
Also test if the best strategy is picked if none is specified. This is
done by adding a simple test case where recursive detects a rename, but
resolve does not, and verify that finally merge will pick up the
previous.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need test results to be committed if we're fixing a test.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes, the easiest way to fix up a patch is to edit it directly, even
adding or deleting lines. Now, many people are not as divine as certain
benevolent dictators as to update the hunk headers correctly at the first
try.
So teach the tool to do it for us.
[jc: with tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with a lot of people who backport patches all day long, every
once in a while I get a patch that modifies the same file more than once
inside the same patch. git-apply either fails if the second change relies
on the first change or silently drops the first change if the second change
is independent.
The silent part is the scary scenario for us. Also this behaviour is
different from the patch-utils.
I have modified git-apply to create a table of the filenames of files it
modifies such that if a later patch chunk modifies a file in the table it
will buffer the previously changed file instead of reading the original file
from disk.
Logic has been put in to handle creations/deletions/renames/copies. All the
relevant tests of git-apply succeed.
A new test has been added to cover the cases I addressed.
The fix is relatively straight-forward.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "diff --check" to detect and complain if the change
adds lines that look like leftover conflict markers.
We should be able to remove the old Perl script used in the sample
pre-commit hook and modernize the script with this facility.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a patch adds new blank lines at the end, "git apply --whitespace"
warns. This teaches "diff --check" to do the same.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --check" should return non-zero when there was any whitespace
error but the code only paid attention to the error status of the last
new line in the patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we did a sanity check by doing for-each-ref
using each possible format atom. However, we never checked
the actual output produced by that atom, which recently let
an obvious bug go undetected for some time.
While we're at it, also clean up a few '!' into
test_must_fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Resetting a selected set of index entries is done with
"git reset -- paths" syntax, but we did not allow -- to be omitted
even when the command is unambiguous.
This updates the command to follow the general rule:
* When -- appears, revs come before it, and paths come after it;
* When there is no --, earlier ones are revs and the rest are paths, and
we need to guess. When lack of -- marker forces us to guess, we
protect from user errors and typoes by making sure what we treat as
revs do not appear as filenames in the work tree, and what we treat as
paths do appear as filenames in the work tree, and by erroring out if
that is not the case. We tell the user to disambiguate by using -- in
such a case.
which is employed elsewhere in the system.
When this rule is applied to "reset", because we can have only zero or one
rev to the command, the check can be slightly simpler than other programs.
We have to check only the first one or two tokens after the command name
and options, and when they are:
-- A:
no explicit rev given; "A" and whatever follows it are paths.
A --:
explicit rev "A" given and whatever follows the "--" are paths.
A B:
"A" could be rev or path and we need to guess. "B" could
be missing but if exists that (and everything that follows) would
be paths.
So we apply the guess only in the last case and only to "A" (not "B" and
what comes after it).
* As long as "A" is unambiguously a path, index entries for "A", "B" (and
everything that follows) are reset to the HEAD revision.
* If "A" is unambiguously a rev, on the other hand, the index entries for
"B" (and everything that follows) are reset to the "A" revision.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perldiag(1) has following to say about this:
"Can't do inplace edit without backup"
(F) You're on a system such as MS-DOS that gets confused if
you try reading from a deleted (but still opened) file. You
have to say -i.bak, or some such.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sr/tests:
Hook up the result aggregation in the test makefile.
A simple script to parse the results from the testcases
Modify test-lib.sh to output stats to t/test-results/*
Conflicts:
t/test-lib.sh
* jh/clone-packed-refs:
Teach "git clone" to pack refs
Prepare testsuite for a "git clone" that packs refs
Move pack_refs() and friends into libgit
Incorporate fetched packs in future object traversal
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose someone fetches git-svn-ified commits from another repo and then
attempts to use 'git-svn init --rewrite-root=foo bar'. Using git svn rebase
after that will fail badly:
* For each commit tried by working_head_info, rebuild is called indirectly.
* rebuild will iterate over all commits and skip all of them because the
URL does not match. Because of that no rev_map file is generated at all.
* Thus, rebuild will run once for every commit. This takes ages.
* In the end there still isn't any rev_map file and thus working_head_info
fails.
Addressing this behaviour fixes an apparently not too uncommon problem with
providing git-svn mirrors of Subversion repositories. Some repositories are
accessed using different URLs depending on whether the user has push
privileges or not. In the latter case, an anonymous URL is often used that
differs from the push URL. Providing a mirror that is usable in both cases
becomes a lot more possible with this change.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Extend parse-options test suite
api-parse-options.txt: Introduce documentation for parse options API
parse-options.c: fix documentation syntax of optional arguments
api-builtin.txt: update and fix typo
This patch serves two purposes:
1. test-parse-option.c should be a more complete
example for the parse-options API, and
2. there have been no tests for OPT_CALLBACK,
OPT_DATE, OPT_BIT, OPT_SET_INT and OPT_SET_PTR
before.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an argument for an option is optional, short options don't need a
space between the option and the argument, and long options need a "=".
Otherwise, arguments are misinterpreted.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/test:
enable whitespace checking of test scripts
avoid trailing whitespace in zero-change diffstat lines
avoid whitespace on empty line in automatic usage message
mask necessary whitespace policy violations in test scripts
fix whitespace violations in test scripts
The test used "diff-files -q" which is not about reporting if there is
a difference at all. Instead, make sure that the path remains as
conflicting in the index after rerere autoresolves it, as we will be
adding rerere.autoupdate configuration with the next patch.
Add description of GIT_SKIP_TESTS variable, taken almost verbatim
(adjusting for conventions in t/README) from the commit message in
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the arguments to test_must_fail() begin with a variable assignment,
test_must_fail() attempts to execute the variable assignment as a command.
This fails, and so test_must_fail returns with a successful status value
without running the command it was intended to test.
For example, the following script:
#!/bin/sh
test_must_fail () {
"$@"
test $? -gt 0 -a $? -le 129
}
foo='wo adrian'
test_must_fail foo='yo adrian' sh -c 'echo foo: $foo'
always exits zero and prints the message:
test.sh: line 3: foo=yo adrian: command not found
Test 16 calls test_must_fail in such a way and therefore has not been
testing whether git 'do[es] not fire editor in the presence of conflicts'.
A workaround is to set and export the variable in a normal way, not
using one-shot notation. Because this would affect the remainder of
the process, the test is done inside a subshell.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5515-fetch-merge-logic removes many, but not all, refs between each test.
This is done by removing the corresponding refs/foo/* files in the .git/refs
hierarchy. However, once "git clone" starts producing packed refs, these refs
will no longer be in the .git/refs hierarchy, but rather listed in
.git/packed-refs. This patch teaches t5515-fetch-merge-logic to remove the
refs using "git update-ref -d" which properly handles packed refs.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the --import-marks and --export-marks to fast-export. These import
and export the marks used to for all revisions exported in a similar fashion
to what fast-import does. The format is the same as fast-import, so you can
create a bidirectional importer / exporter by using the same marks file on
both sides.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a shell script (t/t9700-perl-git.sh) that sets up a git repository
and a perl script (t/t9700/test.pl) that runs the actual tests.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is for running external test scripts in other programming
languages that provide continuous output about their tests. Using
test_expect_success (like "test_expect_success 'description' 'perl
test-script.pl'") doesn't suffice here because test_expect_success
eats stdout in non-verbose mode, which is not fixable without major
file descriptor trickery.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --long-tests option to test-lib.sh, which enables tests to
selectively run more exhaustive (longer running, potentially
brute-force) tests. Such exhaustive tests would only be useful if one
works on the specific module that is being tested -- for a general "cd
t/; make" to check whether everything is OK, such exhaustive tests
shouldn't be run by default since the longer it takes to run the
tests, the less often they are actually run.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_explicit is called for each push refspec to try to
fully resolve the source and destination sides of the
refspec. Currently, we look at each refspec and report
errors on both the source and the dest side before aborting.
It makes sense to report errors for each refspec, since an
error in one is independent of an error in the other.
However, reporting errors on the 'dst' side of a refspec if
there has been an error on the 'src' side does not
necessarily make sense, since the interpretation of the
'dst' side depends on the 'src' side (for example, when
creating a new unqualified remote ref, we use the same type
as the src ref).
This patch lets match_explicit return early when the src
side of the refspec is bogus. We still look at all of the
refspecs before aborting the push, though.
At the same time, we clean up the call signature, which
previously took an extra "errs" flag. This was pointless, as
we didn't act on that flag, but rather just passed it back
to the caller. Instead, we now use the more traditional
"return -1" to signal an error, and the caller aggregates
the error count.
This change fixes two bugs, as well:
- the early return avoids a segfault when passing a NULL
matched_src to guess_ref()
- the check for multiple sources pointing to a single dest
aborted if the "err" flag was set. Presumably the intent
was not to bother with the check if we had no
matched_src. However, since the err flag was passed in
from the caller, we might abort the check just because a
previous refspec had a problem, which doesn't make
sense.
In practice, this didn't matter, since due to the error
flag we end up aborting the push anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the git-svn-author test to check that extra newlines aren't inserted
into commit messages as they take a round trip from git to svn and back.
We test both with and without the --add-author-from option to git-svn.
git-svn: test that svn repo doesn't have extra newlines.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all of the policy violations have been cleaned up,
we can turn this on and start checking incoming patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we produce a diffstat line even though no
lines have changed (e.g., because of an exact rename). In
this case, there is no +/- "graph" after the number of
changed lines. However, we output the space separator
unconditionally, meaning that these lines contained a
trailing space character.
This isn't a huge problem, but in cleaning up the output we
are able to eliminate some trailing whitespace from a test
vector.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When outputting a usage message with a blank line in the
header, we would output a line with four spaces. Make this
truly a blank line.
This helps us remove trailing whitespace from a test vector.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of these violations are necessary parts of the tests
(which are generally checking the behavior of trailing
whitespace, or contain diff fragments with empty lines).
Our solution is two-fold:
1. Process input with whitespace problems using tr. This
has the added bonus that it becomes very obvious where
the bogus whitespace is intended to go.
2. Move large diff fragments into their own supplemental
files. This gets rid of the whitespace problem, since
supplemental files are not checked, and it also makes
the test script a bit easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These violations are simply wrong, but were never caught
because whitespace policy checking is turned off in the test
scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test did "reset --hard" (where the HEAD commit has an empty
blob at path "empty") followed by "> empty", expecting that
the index does not notice the file _changed_ since git wrote
it out upon "reset" if the redirection is done quickly enough.
There was no need to do the emptying, and it gave a wrong result
if "reset --hard" happened on time T and then ">empty" happened on
the next second T+1. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* om/remote-fix:
"remote prune": be quiet when there is nothing to prune
remote show: list tracked remote branches with -n
remote prune: print the list of pruned branches
builtin-remote: split show_or_prune() in two separate functions
remote show: fix the -n option
Only ignore whitespace errors in t/tNNNN-*.sh and the t/tNNNN
subdirectories. Other files (like test libraries) should still be
checked.
Also fix a whitespace error in t/test-lib.sh.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is really too quiet which make it unconfortable to use.
Also implement a --dry-run option, in place of the original -n one, to
list stale tracking branches that will be pruned, but do not actually
prune them.
Add a test case for --dry-run.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perl version accepted a -n flag, to show local informations only
without querying remote heads, that seems to have been lost in the C
revrite.
This restores the older behaviour and add a test case.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code forgot to convert the blob contents into work tree
representation before writing it out. Also fixes leaks -- earlier
the updated blobs were never freed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new argument teaches Git to not look for any untracked files,
saving cycles on slow file systems, or large repos.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This lets you specify how you want untracked files to be listed.
The possible options are:
normal - Show untracked files and directories
all - Show all untracked files
The 'all' mode is used, if the mode is not specified.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
If you work on a repo with core.autocrlf == true, you would expect
every text file to have CRLF EOLs. However, if you by some operation,
get a conflict, then the conflicted file has LF EOLs.
Now, of course you'd go about resolving the files conflict, and then 'git
add <file>'. When you do that, you'll get the warning saying that LF will
be replaced by CRLF. Then you commit. The end result is that you have a
workingdir with a mix of LF and CRLF files, which after some more
operations may trigger a "whole file changed" diff, due to the workingdir
file now having LF EOLs.
An LF only conflict file results in the resolved file being in LF,
the commit is in LF and a warning saying that LF will be replaced
by CRLF, and the working dir ends up with a mix of CRLF and LF files.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attributes can be specified at three different places: the internal
table of default values, the file $GIT_DIR/info/attributes and files
named .gitattributes in the work tree. Since bare repositories don't
have a work tree, git should ignore any .gitattributes files there.
This patch makes git do that, so the only way left for a user to specify
attributes in a bare repository is the file info/attributes (in addition
to changing the defaults and recompiling).
In addition, git-check-attr is now allowed to run without a work tree.
Like any user of the code in attr.c, it ignores the .gitattributes files
when run in a bare repository. It can still read from info/attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paths marked with this attribute are not output to git-archive
output.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, cat-file --batch / --batch-check would silently exit if it
was passed a non-existent SHA1 on stdin. Now it prints "<SHA1>
missing" as in all other cases (and as advertised in the
documentation).
Note that cat-file --batch-check (but not --batch) will still output
"error: unable to find <SHA1>" on stderr if a non-existent SHA1 is
passed, but this does not affect parsing its stdout.
Also, type <= 0 was previously using the potentially uninitialized
type variable (relying on it being 0); it is now being initialized.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously timestamps were removed unconditionally (though this didn't
seem to break this test). Now they are only removed if $no_ts is
non-empty.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes 'make' output the aggregated results at the end of each build.
The 'git-test-result' file is removed both before and after each build.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a simple script that aggregates key:value pairs in a file.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is needed order to aggregate data on the test run later on.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The <pattern> given "git describe --match" was used only to filter tag
objects, and not to filter lightweight tags. This fixes it.
[jc: made the log to clarify this is a bugfix, not an enhancement, with
additional test]
Signed-off-by: Michael Dressel <MichaelTiloDressel@t-online.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The double slashes "//" result from url./$TRASH/. expansion and the
current directory, which even in cygwin contains "/" as first
character. In cygwin such strings have special meaning: UNC path.
Accessing an UNC path built for test purpose usually fails.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One particular test wants to check the behaviour of the command
when these variables are not set, but the later tests should have
the reliable committer identity for repeatable tests.
Move the "unset" of the variables inside a subshell in the test
that wants to unset them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of git-commit internally used git-commit-tree which
omitted duplicated parents given from the command line. This prevented a
nonsensical octopus merge from getting created even when you said "git
merge A B" while you are already on branch A.
However, when git-commit was rewritten in C, this sanity check was lost.
This resurrects it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving the old sha1 is already optional when changing a ref, and it's
quite handy when running update-ref manually. So make it optional for
deleting a ref too.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/remote:
Make "git-remote rm" delete refs acccording to fetch specs
Make "git-remote prune" delete refs according to fetch specs
Remove unused remote_prefix member in builtin-remote
A remote may be configured to fetch into tracking branches that
do not match the remote name. For example a user may have created
extra remotes that will fetch to the same tracking branch namespace,
but from different URLs:
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = refs/heads/*:refs/remotes/origin/*
[remote "alt"]
url = git://repo.or.cz/alt-git.git
fetch = refs/heads/*:refs/remotes/origin/*
When running `git remote prune alt` we expect stale branches to
be removed from "refs/remotes/origin/*" and not from the unused
namespace of "refs/remotes/alt/*".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, some tests will fail because they compare command output
of subprocesses (such as git) with $PWD -- but subprocesses have the
physical path as their working directory, whereas $PWD contains the
symlinked path. This fixes it.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves the am test cases in t4150-am.sh and the
am subdirectory test cases from t/t4150-am-subdir.sh into
t/4151-am.sh.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add t/t4151-am.sh that does basic testing of git-am functionality,
including:
* am applies patch correctly
* am changes committer and keeps author
* am --signoff adds Signed-off-by: line
* am stays in branch
* am --signoff does not add Signed-off-by: line if already there
* am without --keep removes Re: and [PATCH] stuff
* am --keep really keeps the subject
* am -3 falls back to 3-way merge
* am pauses on conflict
* am --skip works
* am --resolved works
* am takes patches from a Pine mailbox
* am fails on mail without patch
* am fails on empty patch
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other signals are also common, for example SIGTERM and SIGHUP.
This patch modifies the lock file mechanism to catch more signals.
It also modifies http-push.c which was missing SIGTERM.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is unfortunate that "git init --bare" does not work and the only reason
why "init" did not learn its own "--bare" option is because "git --bare
init" already does the job (and as an option to the git 'potty', it is
more generic solution).
This teaches "git init" its own "--bare" option, so that both "git --bare init"
and "git init --bare" works mostly the same way.
[jc: rewrote the log message and added test]
Signed-off-by: Luciano Rocha <strange@nsk.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sync with builtin-fetch--tool.c where append_fetch_head()
honors update_local_ref() return value.
This fixes non fast forward fetch exit status,
http://bugzilla.altlinux.org/show_bug.cgi?id=15037
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are broken filesystems that cannot have a file whose name is "nul"
anywhere on it. Rename the test file to make ourselves more portable.
Noticed by Mark Levedahl.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit cfabd6eee1745cfec58cfcb794ce8847e43b888a. I had
implemented it without understanding what --full-history does. Consider
this history:
C--M--N
/ / /
A--B /
\ /
D-/
where B and C modify a path, X, in the same way so that the result is
identical, and D does not modify it at all. With the path limiter X and
without --full-history this is simplified to
A--B
i.e. only one of the paths via B or C is chosen. I had assumed that
--full-history would keep both paths like this
C--M
/ /
A--B
removing the path via D; but in fact it keeps the entire history.
Currently, git does not have the capability to simplify to this
intermediary case. However, the other extreme to keep the entire history
is not wanted either in usual cases. I think we can expect that histories
like the above are rare, and in the usual cases we want a simplified
history. So let's remove --full-history again.
(Concerning t7003, subsequent tests depend on what the test case sets up,
so we can't just back out the entire test case.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
* js/mailinfo:
mailsplit: minor clean-up in read_line_with_nul()
mailinfo: apply the same fix not to lose NULs in BASE64 and QP codepaths
mailsplit and mailinfo: gracefully handle NUL characters
* jc/add-n-u:
Make git add -n and git -u -n output consistent
"git-add -n -u" should not add but just report
Conflicts:
builtin-add.c
builtin-mv.c
cache.h
read-cache.c
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
* jc/apply-whitespace:
builtin-apply: do not declare patch is creation when we do not know it
builtin-apply: accept patch to an empty file
builtin-apply: typofix
* ar/batch-cat:
change quoting in test t1006-cat-file.sh
builtin-cat-file.c: use parse_options()
git-svn: Speed up fetch
Git.pm: Add hash_and_insert_object and cat_blob
Git.pm: Add command_bidi_pipe and command_close_bidi_pipe
git-hash-object: Add --stdin-paths option
Add more tests for git hash-object
Move git-hash-object tests from t5303 to t1007
git-cat-file: Add --batch option
git-cat-file: Add --batch-check option
git-cat-file: Make option parsing a little more flexible
git-cat-file: Small refactor of cmd_cat_file
Add tests for git cat-file
* cc/bisect:
bisect: use a detached HEAD to bisect
bisect: trap critical errors in "bisect_start"
bisect: fix left over "BISECT_START" file when starting with junk rev
bisect: add test cases to check that "git bisect start" is atomic
* ap/svn:
git-svn: add test for --add-author-from and --use-log-author
git-svn: add documentation for --add-author-from option.
git-svn: Add --add-author-from option.
git-svn: add documentation for --use-log-author option.
* js/cvsexportcommit:
cvsexportcommit: introduce -W for shared working trees (between Git and CVS)
cvsexportcommit: chomp only removes trailing whitespace
Conflicts:
git-cvsexportcommit.perl
* js/ignore-submodule:
Ignore dirty submodule states during rebase and stash
Teach update-index about --ignore-submodules
diff options: Introduce --ignore-submodules
* mo/cvsserver:
Documentation: Fix skipped section level
git-cvsserver: add ability to guess -kb from contents
implement gitcvs.usecrlfattr
git-cvsserver: add mechanism for managing working tree and current directory
The function fgets() has a big problem with NUL characters: it reads
them, but nobody will know if the NUL comes from the file stream, or
was appended at the end of the line.
So implement a custom read_line_with_nul() function.
Noticed by Tommy Thorn.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/repack:
Documentation/git-repack.txt: document new -A behaviour
let pack-objects do the writing of unreachable objects as loose objects
add a force_object_loose() function
builtin-gc.c: deprecate --prune, it now really has no effect
git-gc: always use -A when manually repacking
repack: modify behavior of -A option to leave unreferenced objects unpacked
Conflicts:
builtin-pack-objects.c
* sp/ignorecase:
t0050: Fix merge test on case sensitive file systems
t0050: Add test for case insensitive add
t0050: Set core.ignorecase case to activate case insensitivity
t0050: Test autodetect core.ignorecase
git-init: autodetect core.ignorecase
Make git recognize a new environment variable that prevents it from
chdir'ing up into specified directories when looking for a GIT_DIR.
Useful for avoiding slow network directories.
For example, I use git in an environment where homedirs are automounted
and "ls /home/nonexistent" takes about 9 seconds. Setting
GIT_CEILING_DIRS="/home" allows "git help -a" (for bash completion) and
"git symbolic-ref" (for my shell prompt) to run in a reasonable time.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
normalize_absolute_path removes several oddities form absolute paths,
giving nice clean paths like "/dir/sub1/sub2". Also add a test case
for this utility, based on a new test program (in the style of test-sha1).
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a more appropriate location according to t/README.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first test in this series tests "git clone -l -s --reference B A C",
where repo B is a superset of repo A (A has one commit, B has the same
commit plus another). In this case, all objects to be cloned are already
present in B.
However, we should also test the case where the "--reference" repo is a
_subset_ of the source repo (e.g. "git clone -l -s --reference A B C"),
i.e. some objects are not available in the "--reference" repo, and will
have to be found in the source repo.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this case, the reference repository has some useful loose objects,
but not all useful objects, and we make sure that we can find the
objects we fetch from the repository we're cloning in the new
repository, instead of potentially being distracted by the reference
repository.
Doing the wrong thing in a builtin-clone implementation would lead to
this looking for an object in the wrong place, not finding it (because
it's only in the right place), and crashing.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing fails during "pull --rebase", you cannot just clean up the
working directory and call "pull --rebase" again, since the remote branch
was already fetched.
Therefore, die early when the working directory is dirty.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git bisect" was first written, it was not possible to
checkout a detached HEAD. The detached feature appeared latter.
That's why before this patch the "git bisect" process used a
"bisect" branch to checkout new revisions to be tested (and also
a "new-bisect" one to check if the checkouts could work).
This patch makes "git bisect" checkout revisions to be tested on
a detached HEAD. This simplifies the code a bit.
The tests to check that "git bisect" does not start if a
"bisect" or a "new-bisect" branch exists are removed as they
are not relevant any more.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, when using "git bisect start" with mistaken revs
or when the checkout of the branch we want to test failed, we exited
after having written files like ".git/BISECT_START",
".git/BISECT_NAMES" and after having written "refs/bisect/bad" and
"refs/bisect/good-*" refs.
With this patch we trap all errors that can happen when writing the
new state and when we are in "bisect_next". So that we can try to
clean up everything in case of problems, using "bisect_clean_state".
This patch also contains a "bisect_write" cleanup to make it exit
on error and return 0 otherwise.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, when using for example:
$ git bisect start <stuff1> <stuff2>
with <stuff1> or <stuff2> that cannot be parsed as a revision, we
could leave a ".git/BISECT_START" file, from a previous
"git bisect start", alone.
This patch makes sure that it does not happen by removing the
"BISECT_START" file in "bisect_clean_state" and then always writing
it again at the end of "bisect_start".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds some test cases to check that "git bisect start"
doesn't leave us in a bad state, especially when it fails.
These test cases show that "git bisect start" is not atomic when it
fails and leave some files like .git/BISECT_START, and in some
cases some refs, over.
The test failures should be fixed in latter commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/add-unreadable:
Add a config option to ignore errors for git-add
Add a test for git-add --ignore-errors
Add --ignore-errors to git-add to allow it to skip files with read errors
Extend interface of add_files_to_cache to allow ignore indexing errors
Make the exit code of add_file_to_index actually useful
* jk/maint-send-email-compose:
send-email: rfc2047-quote subject lines with non-ascii characters
send-email: specify content-type of --compose body
Conflicts:
t/t9001-send-email.sh
Due to 065096c (git-send-email.perl: Handle shell metacharacters in
$EDITOR properly, 2008-05-04) which is a backward incompatible change (but
it makes handling of EDITOR consistent with other parts of the system),
the test script t9001 had to be adjusted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always use 'utf-8' as the encoding, since we currently
have no way of getting the information from the user.
This also refactors the quoting of recipient names, since
both processes can share the rfc2047 quoting code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the compose message contains non-ascii characters, then
we assume it is in utf-8 and include the appropriate MIME
headers. If the user has already included a MIME-Version
header, then we assume they know what they are doing and
don't add any headers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of the test is not really to test the ability of the
filesystem to keep the given x-bit, but to check is merge-recursive
correctly handles it.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit with error if cd into the "trash directory" failed (error
already reported, so just exit).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see no context nor deleted line in the patch, we used to declare
that the patch creates a new file. But some people create an empty file
and then apply a patch to it. Similarly, a patch that delete everything
is not a deletion patch either.
This commit corrects these two issues. Together with the previous commit,
it allows a diff between an empty file and a line-ful file to be treated
as both creation patch and "add stuff to an existing empty file",
depending on the context. A new test t4126 demonstrates the fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a case sensitive filesystem, "git reset --hard" might refuse to
overwrite a file whose name differs only by case, even if
core.ignorecase is set. It is not clear which circumstances cause this
behavior. This commit simply works around the problem by removing
the case changing file before running "git reset --hard".
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The in-place mode of sed used in t7502-commit is a non-POSIX extension.
That call of sed is replaced by a more portable version using a temporary file.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is not initialized and you do not want to change the
defaults from .gitmodules anyway, you can now say
$ git submodule update --init <name>
When "update" is called without --init on an uninitialized submodule,
a hint to use --init is printed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "gitcvs.allbinary" is set to "guess", then any file that has
not been explicitly marked as binary or text using the "crlf" attribute
and the "gitcvs.usecrlfattr" config will guess binary based on the contents
of the file.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult
the "crlf" for each file to determine if it should mark the file
as binary (-kb).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a CVS checkout, it is easy to import the CVS history by
calling "git cvsimport". However, interacting with the CVS repository
using "git cvsexportcommit" was cumbersome, since that script assumes
separate working directories for Git and CVS.
Now, you can call cvsexportcommit with the -W option. This will
automatically discover the GIT_DIR, and it will check out the parent
commit before exporting the commit.
The intended workflow is this:
$ CVSROOT=$URL cvs co module
$ cd module
$ git cvsimport
hack, hack, hack, making two commits, cleaning them up using rebase -i.
$ git cvsexportcommit -W -c -p -u HEAD^
$ git cvsexportcommit -W -c -p -u HEAD
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing or stashing, chances are that you do not care about
dirty submodules, since they are not updated by those actions anyway.
So ignore the submodules' states.
Note: the submodule states -- as committed in the superproject --
will still be stashed and rebased, it is _just_ the state of the
submodule in the working tree which is ignored.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Somewhere in the process of finishing up builtin-clone, the update of
the working tree was lost. This was due to not using the option "merge"
for unpack_trees().
Breakage noticed by Kevin Ballard.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/committer:
commit: Show committer if automatic
commit: Show author if different from committer
Preparation to call determine_author_info from prepare_to_commit
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Conflicts:
t/t9115-git-svn-dcommit-funky-renames.sh
* mv/format-cc:
Add tests for sendemail.cc configuration variable
git-send-email: add a new sendemail.cc configuration variable
git-format-patch: add a new format.cc configuration variable
The output of 'tar tv' varies from system to system. In
particular, the t5000 was expecting to parse the date from
something like:
-rw-rw-r-- root/root 0 2008-05-13 04:27 file
but FreeBSD's tar produces this:
-rw-rw-r-- 0 root root 0 May 13 04:27 file
Instead of relying on tar's output, let's just extract the
file using tar and stat the result using perl.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some shells (notably /bin/sh on FreeBSD 6.1), the
construct
foo && ! bar | baz
is true if
foo && baz
whereas for most other shells (such as bash) is true if
foo && ! baz
We can work around this by specifying
foo && ! (bar | baz)
which works everywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a minimalistic set of tests to recently added --add-author-from
option and existing --use-log-author option to git-svn.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/core-optim:
Optimize symlink/directory detection
Avoid some unnecessary lstat() calls
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
Make git-add behave more sensibly in a case-insensitive environment
When adding files to the index, add support for case-independent matches
Make unpack-tree update removed files before any updated files
Make branch merging aware of underlying case-insensitive filsystems
Add 'core.ignorecase' option
Make hash_name_lookup able to do case-independent lookups
Make "index_name_exists()" return the cache_entry it found
Move name hashing functions into a file of its own
Make unpack_trees_options bit flags actual bitfields
Before this patch, when "git rev-parse --verify" was passed at least one
good rev and then anything, it would output something for the good rev
even if it would latter exit on error.
With this patch, we only output something if everything is ok.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, something like:
$ git rev-parse --verify HEAD --default master
did not work, while:
$ git rev-parse --default master --verify HEAD
worked.
This patch fixes that, so that they both work (assuming
HEAD and master can be parsed).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch documents the current behavior of "git rev-parse --verify".
This command is tested both with and without the "--quiet" and
"--default" options.
This shows some problems with the current behavior that will be fixed
in latter patches:
- in case of errors, there should be no good rev output on
stdout,
- with "--default" one test case is broken
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add should recognize if a file is added with a different case and add
the file using its original name.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case insensitive file handling is only active when
core.ignorecase = true. Hence, we need to set it to give the tests
in t0050 a chance to succeed. Setting core.ignorecase explicitly
allows to test some aspects of case handling even on case sensitive file
systems.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify if core.ignorecase is automatically set to 'true' during
repository initialization if the file system is case insensitive,
and unset or 'false' otherwise.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous behavior of the -A option was to retain any previously
packed objects which had become unreferenced, and place them into the newly
created pack file. Since git-gc, when run automatically with the --auto
option, calls repack with the -A option, this had the effect of retaining
unreferenced packed objects indefinitely. To avoid this scenario, the
user was required to run git-gc with the little known --prune option or
to manually run repack with the -a option.
This patch changes the behavior of the -A option so that unreferenced
objects that exist in any pack file being replaced, will be unpacked into
the repository. The unreferenced loose objects can then be garbage collected
by git-gc (i.e. git-prune) based on the gc.pruneExpire setting.
Also add new tests for checking whether unreferenced objects which were
previously packed are properly left in the repository unpacked after
repacking.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change cd67e4d4 introduced a new configuration parameter that told
pull to automatically perform a rebase instead of a merge. This
change provides a configuration option to enable this feature
automatically when creating a new branch.
If the variable branch.autosetuprebase applies for a branch that's
being created, that branch will have branch.<name>.rebase set to true.
Signed-off-by: Dustin Sallings <dustin@spy.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this, git svn clone -s http://svn.gnome.org/svn/gtk+
is successful.
Also modified the funky rename test for this, which _does_
include escaped '+' signs for HTTP URLs. SVN seems to accept
either "+" or "%2B" in filenames and directories (just not the
main URL), so I'll leave it alone for now.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* py/diff-submodule:
is_racy_timestamp(): do not check timestamp for gitlinks
diff-lib.c: rename check_work_tree_entity()
diff: a submodule not checked out is not modified
Add t7506 to test submodule related functions for git-status
t4027: test diff for submodule with empty directory
Before this patch no error was printed when "git rev-list --bisect-vars"
failed. This can happen when bad and good revs are mistaken.
This patch prints an error message on stderr that describe the likely
failure cause.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--batch is similar to --batch-check, except that the contents of each object is
also printed. The output's form is:
<sha1> SP <type> SP <size> LF
<contents> LF
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows multiple objects to be specified on stdin. For each
object specified, a line of the following form is printed:
<sha1> SP <type> SP <size> LF
If the object does not exist in the repository, a line of the following form is
printed:
<object> SP missing LF
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lh/git-file:
Teach GIT-VERSION-GEN about the .git file
Teach git-submodule.sh about the .git file
Teach resolve_gitlink_ref() about the .git file
Add platform-independent .git "symlink"
* lh/branch-merged:
Add tests for `branch --[no-]merged`
git-branch.txt: compare --contains, --merged and --no-merged
git-branch: add support for --merged and --no-merged
If a branch named "bisect" or "new-bisect" already was created in the
repo by other means than git bisect, doing a git bisect used to override
the branch without a warning. Now if the branch "bisect" or
"new-bisect" already exists, and it was not created by git bisect itself,
git bisect start fails with an appropriate error message. Additionally,
if checking out a new bisect state fails due to a merge problem, git
bisect cleans up the temporary branch "new-bisect".
The accidental override has been noticed by Andres Salomon, reported
through
http://bugs.debian.org/478647
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to help prevent regressions in the future, rename the trash directory
for all tests to contain spaces. This patch also corrects two failures that
were caused or exposed by this change.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This form is not portable across all shells, so replace instances of:
export FOO=bar
with:
FOO=bar
export FOO
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, this function correctly handles cases where the pwd contains
spaces, quotes, and other troublesome metacharacters.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the git-send-perl semantics for launching an editor when
$GIT_EDITOR (or friends) contains shell metacharacters to match
launch_editor() in builtin-tag.c. If we use the current approach
(sh -c '$0 $@' "$EDITOR" files ...), we see it fails when $EDITOR has
shell metacharacters:
$ sh -x -c '$0 $@' "$VISUAL" "foo"
+ "$FAKE_EDITOR" foo
"$FAKE_EDITOR": 1: "$FAKE_EDITOR": not found
Whereas builtin-tag.c will invoke sh -c "$EDITOR \"$@\"".
Thus, this patch changes git-send-email.perl to use the same method as the
C utilities, and additionally updates t/t9001-send-email.sh to test for
this bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an element of the configuration key name other than the first or last
contains a backslash, it is not escaped on output, but is treated as an
escape sequence on input. Thus, the backslash is lost when re-loading
the configuration.
This patch corrects this by having backslashes escaped properly, and
introduces a new test for this bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also update t/t3407-rebase-abort.sh to expose the bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because we do not even check the timestamp to determie if a gitlink
is up to date or not, triggering the racy-timestamp check for gitlinks
does not make sense.
This fixes the recently added test in t7506.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
948dd34 (diff-index: careful when inspecting work tree items, 2008-03-30)
made the work tree check careful not to be fooled by a new directory that
exists at a place the index expects a blob. For such a change to be a
typechange from blob to submodule, the new directory has to be a
repository.
However, if the index expects a submodule there, we should not insist the
work tree entity to be a repository --- a simple directory that is not a
full fledged repository (even an empty directory would do) should be
considered an unmodified subproject, because that is how a superproject
with a submodule is checked out sparsely by default.
This makes the function check_work_tree_entity() even more careful not to
report a submodule that is not checked out as removed. It fixes the
recently added test in t4027.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of rename limiting is to bound the amount of time
we spend figuring out inexact renames. Currently we use a
single value, diff.renamelimit, for all situations. However,
it is probably the case that a user is willing to spend more
time finding renames during a merge than they are while
looking at git-log.
This patch provides a way of setting those values separately
(though for backwards compatibility, merge still falls back
on the diff renamelimit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a nice side effect it also fixes t2002-checkout-cache-u.sh on FreeBSD 4,
/bin/sh of which has problems interpreting "! command" construction.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone [options] $src $dst excess-garbage" simply ignored
excess-garbage without giving any diagnostic message. Fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
