We generally avoid git on the left-hand side of a pipe, because it loses
the exit code of the command (and thus we'd miss things like segfaults
or unexpected failures). In the cases in t7001, we wouldn't expect
failures (they are just inspecting the repository state, and are not the
main point of the test), but it doesn't hurt to be careful.
In all but one case here we're piping "ls-files --stage" to cut off the
pathname (since we compare entries before and after moving). Let's pull
that into a helper function to avoid repeating the slightly awkward
replacement.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'on all' in the title of the test 'write-tree on all' was unclear;
remove it.
* Add a baseline 'test_all_match git write-tree' before making any
changes to the index, providing a reference point for the 'write-tree'
prior to any modifications.
* Add a comparison of the output of 'git status --porcelain=v2' to test
the working tree after 'write-tree' exits.
* Ensure SKIP_WORKTREE files weren't materialized on disk by using
"test_path_is_missing".
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just started piping the file paths via `stdin` instead of passing
them via the command-line, to avoid running into command-line
limitations.
However, since we now pipe the file paths, we need to take care of
special characters.
This fixes https://github.com/git-for-windows/git/issues/2293
Signed-off-by: Nico Rieck <nico.rieck@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid running into command line limitations, some of Git's commands
support the `--stdin` option.
Let's use exactly this option in the three rev-list/log invocations in
gitk that would otherwise possibly run the danger of trying to invoke a
too-long command line.
While it is easy to redirect either stdin or stdout in Tcl/Tk scripts,
what we need here is both. We need to capture the output, yet we also
need to pipe in the revs/files arguments via stdin (because stdin does
not have any limit, unlike the command line). To help this, we use the
neat Tcl feature where you can capture stdout and at the same time feed
a fixed string as stdin to the spawned process.
One non-obvious aspect about this change is that the `--stdin` option
allows to specify revs, the double-dash, and files, but *no* other
options such as `--not`. This is addressed by prefixing the "negative"
revs with `^` explicitly rather than relying on the `--not` option
(thanks for coming up with that idea, Max!).
This fixes https://github.com/git-for-windows/git/issues/1987
Analysis-and-initial-patch-by: Max Kirillov <max@max630.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation at e75d1da38a claimed support, but it was never present
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier change broke "doc-diff", which has been corrected.
* fc/doc-use-datestamp-in-commit:
doc-diff: drop SOURCE_DATE_EPOCH override
doc: doc-diff: specify date
Test updates.
* ar/config-count-tests-updates:
t1300: add tests for missing keys
t1300: check stderr for "ignores pairs" tests
t1300: drop duplicate test
The tracing mechanism learned to notice and report when
auto-discovered bare repositories are being used, as allowing so
without explicitly stating the user intends to do so (with setting
GIT_DIR for example) can be used with social engineering as an
attack vector.
* gc/trace-bare-repo-setup:
setup: trace bare repository setups
'git notes append' was taught '--separator' to specify string to insert
between paragraphs.
* tl/notes-separator:
notes.c: introduce "--[no-]stripspace" option
notes.c: append separator instead of insert by pos
notes.c: introduce '--separator=<paragraph-break>' option
t3321: add test cases about the notes stripspace behavior
notes.c: use designated initializers for clarity
notes.c: cleanup 'strbuf_grow' call in 'append_edit'
The documentation was misleading about the interaction between
GIT_DEFAULT_HASH and "git clone", which has been clarified to
stress that the variable is to be ignored by the command.
* jc/doc-clarify-git-default-hash-variable:
doc: GIT_DEFAULT_HASH is and will be ignored during "clone"
Teach the recently invented "password expiry time" trait to the
wincred credential helper.
* mh/credential-password-expiry-wincred:
credential/wincred: store password_expiry_utc
Error messages given when working on an unborn branch that is
checked out in another worktree have been improved.
* rj/branch-unborn-in-other-worktrees:
branch: avoid unnecessary worktrees traversals
branch: rename orphan branches in any worktree
branch: description for orphan branch errors
branch: use get_worktrees() in copy_or_rename_branch()
branch: test for failures while renaming branches
The '--all' option of git-push built-in cmd support to push all branches
(refs under refs/heads) to remote. Under the usage, a user can easlily
work in some scenarios, for example, branches synchronization and batch
upload.
The '--all' was introduced for a long time, meanwhile, git supports to
customize the storage location under "refs/". when a new git user see
the usage like, 'git push origin --all', we might feel like we're
pushing _all_ the refs instead of just branches without looking at the
documents until we found the related description of it or '--mirror'.
To ensure compatibility, we cannot rename '--all' to another name
directly, one way is, we can try to add a new option '--heads' which be
identical with the functionality of '--all' to let the user understand
the meaning of representation more clearly. Actually, We've more or less
named options this way already, for example, in 'git-show-ref' and 'git
ls-remote'.
At the same time, we fix a related issue about the wrong help
information of '--all' option in code and add some test cases in
t5523, t5543 and t5583.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 47cfc9bd (attr: add flag `--source` to work with tree-ish,
2023-01-14) taught "git check-attr" the "--source=<tree>" option to
allow it to read attribute files from a tree-ish, but did so only
for the command. Just like "check-attr" users wanted a way to use
attributes from a tree-ish and not from the working tree files,
users of other commands (like "git diff") would benefit from the
same.
Undo most of the UI change the commit made, while keeping the
internal logic to read attributes from a given tree-ish. Expose the
internal logic via a new "--attr-source=<tree>" command line option
given to "git", so that it can be used with any git command that
runs as part of the main git process.
Additionally, add an environment variable GIT_ATTR_SOURCE that is set
when --attr-source is passed in, so that subprocesses use the same value
for the attributes source tree.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 34ae3b70 (name-rev: deprecate --stdin in favor of --annotate-stdin),
we renamed --stdin to --annotate-stdin for the sake of a clearer name
for the option, and added text that indicates --stdin is deprecated. The
next step is to hide --stdin completely.
Make the option hidden. Also, update documentation to remove all
mentions of --stdin.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is $(git show -s --raw --pretty=format:%at HEAD) in this test
that is meant to grab the author time of the commit. We used to
have a bug in the command line option parser of the diff family of
commands, where "show -s --raw" was identical to "show -s".
With the "-s" bug fixed, "show -s --raw" would mean the same thing
as "show --raw", i.e. show the output from the diff machinery in the
"raw" format. And this test will start failing, so fix it before
that happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original doc-diff script set SOURCE_DATE_EPOCH to make asciidoc's
output deterministic. Otherwise, the mtime of the source files would end
up in the footer of the manpage, causing noisy and uninteresting diff
hunks.
But this has been unused since 28fde3a1f4 (doc: set actual revdate for
manpages, 2023-04-13), as the footer uses the externally-specified
GIT_DATE instead (that needs to be set consistently, too, which it now
is as of the previous commit).
Asciidoc sets several automatic attributes based on the mtime (or manual
epoch), so it's still possible to write a document that would need
SOURCE_DATE_EPOCH set to be deterministic. But if we wrote such a thing,
it's probably a mistake, and we're better off having doc-diff loudly
show it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sergey Organov noticed and reported "--patch --no-patch --raw"
behaves differently from just "--raw". It turns out that there are
a few interesting bugs in the implementation and documentation.
* First, the documentation for "--no-patch" was unclear that it
could be read to mean "--no-patch" countermands an earlier
"--patch" but not other things. The intention of "--no-patch"
ever since it was introduced at d09cd15d (diff: allow --no-patch
as synonym for -s, 2013-07-16) was to serve as a synonym for
"-s", so "--raw --patch --no-patch" should have produced no
output, but it can be (mis)read to allow showing only "--raw"
output.
* Then the interaction between "-s" and other format options were
poorly implemented. Modern versions of Git uses one bit each to
represent formatting options like "--patch", "--stat" in a single
output_format word, but for historical reasons, "-s" also is
represented as another bit in the same word. This allows two
interesting bugs to happen, and we have both X-<.
(1) After setting a format bit, then setting NO_OUTPUT with "-s",
the code to process another "--<format>" option drops the
NO_OUTPUT bit to allow output to be shown again. However,
the code to handle "-s" only set NO_OUTPUT without unsetting
format bits set earlier, so the earlier format bit got
revealed upon seeing the second "--<format>" option. This is
the problem Sergey observed.
(2) After setting NO_OUTPUT with "-s", code to process
"--<format>" option can forget to unset NO_OUTPUT, leaving
the command still silent.
It is tempting to change the meaning of "--no-patch" to mean
"disable only the patch format output" and reimplement "-s" as "not
showing anything", but it would be an end-user visible change in
behavior. Let's fix the interactions of these bits to first make
"-s" work as intended.
The fix is conceptually very simple.
* Whenever we set DIFF_FORMAT_FOO because we saw the "--foo"
option (e.g. DIFF_FORMAT_RAW is set when the "--raw" option is
given), we make sure we drop DIFF_FORMAT_NO_OUTPUT. We forgot to
do so in some of the options and caused (2) above.
* When processing "-s" option, we should not just set
DIFF_FORMAT_NO_OUTPUT bit, but clear other DIFF_FORMAT_* bits.
We didn't do so and retained format bits set by options
previously seen, causing (1) above.
It is even more tempting to lose NO_OUTPUT bit and instead take
output_format word being 0 as its replacement, but that would break
the mechanism "git show" uses to default to "--patch" output, where
the distinction between telling the command to be silent with "-s"
and having no output format specified on the command line matters,
and an explicit output format given on the command line should not
be "combined" with the default "--patch" format.
So, while we cannot lose the NO_OUTPUT bit, as a follow-up work, we
may want to replace it with OPTION_GIVEN bit, and
* make "--patch", "--raw", etc. set DIFF_FORMAT_$format bit and
DIFF_FORMAT_OPTION_GIVEN bit on for each format. "--no-raw",
etc. will set off DIFF_FORMAT_$format bit but still record the
fact that we saw an option from the command line by setting
DIFF_FORMAT_OPTION_GIVEN bit.
* make "-s" (and its synonym "--no-patch") clear all other bits
and set only the DIFF_FORMAT_OPTION_GIVEN bit on.
which I suspect would make the code much cleaner without breaking
any end-user expectations.
Once that is in place, transitioning "--no-patch" to mean the
counterpart of "--patch", just like "--no-raw" only defeats an
earlier "--raw", would be quite simple at the code level. The
social cost of migrating the end-user expectations might be too
great for it to be worth, but at least the "GIVEN" bit clean-up
alone may be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The array of dirstat_file contained in the dirstat_dir structure is
not freed after the processing ends. Unfortunately, the member that
points at the array, .files, is incremented as the gather_dirstat()
function recursively walks it, and this needs to be plugged by
remembering the beginning of the array before gather_dirstat() mucks
with it and freeing it after we are done.
We can mark t4047 as leak-free. t4000, which is marked as
leak-free, now can exercise dirstat in it, which will happen next.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d208bfd (credential: new attribute password_expiry_utc, 2023-02-18)
introduced this attribute.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we changed the manual page formatting machinery to use the
dates from the commit the documentation source was taken from,
instead of the date the manual page was produced. When "doc-diff"
compares two commits from different dates, the different dates from
the two commits would result in unnecessary differences in the
output because of the change.
Compensate by setting a fixed date when "doc-diff" formats the pages
to be compared to work around this issue.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The titles of manual pages (formatted with AsciiDoc) used to be
chomped at unreasonably short limit, which has been removed; this
makes the formatted output match that of asciidoctor.
* fc/doc-man-lift-title-length-limit:
doc: manpage: remove maximum title length
Our custom callout formatter is no longer used in the documentation
formatting toolchain, as the upstream default ones give better
output these days.
* fc/doc-drop-custom-callout-format:
doc: remove custom callouts format
Doc update to clarify how text and eol attributes interact to
specify the end-of-line conversion.
* ah/doc-attributes-text:
docs: rewrite the documentation of the text and eol attributes
Explain to users that the step to untrack a file will not also prevent them
from getting added in the future.
Signed-off-by: Sohom Datta <sohom.datta@learner.manipal.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" learned to give the e-mail headers to the validate
hook by passing an extra argument from the command line.
* ms/send-email-feed-header-to-validate-hook:
send-email: expose header information to git-send-email's sendemail-validate hook
send-email: refactor header generation functions
DocBook Stylesheets limit the size of the manpage titles for some
reason.
Even some of the longest git commands have no trouble fitting in 80
character terminals, so it's not clear why we would want to limit titles
to 20 characters, especially when modern terminals are much bigger.
For example:
--- a/git-credential-cache--daemon.1
+++ b/git-credential-cache--daemon.1
@@ -1,4 +1,4 @@
-GIT-CREDENTIAL-CAC(1) Git Manual GIT-CREDENTIAL-CAC(1)
+GIT-CREDENTIAL-CACHE--DAEMON(1) Git Manual GIT-CREDENTIAL-CACHE--DAEMON(1)
NAME
git-credential-cache--daemon - Temporarily store user credentials in
@@ -24,4 +24,4 @@ DESCRIPTION
GIT
Part of the git(1) suite
-Git omitted 2023-05-02 GIT-CREDENTIAL-CAC(1)
+Git omitted 2023-05-02 GIT-CREDENTIAL-CACHE--DAEMON(1)
Moreover, asciidoctor manpage backend doesn't limit the title length, so
we probably want to do the same for docbook backends for consistency.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two sentences are confusing because the description of the text
attribute sounds exactly the same as the description of the text=auto
attribute:
"Setting the text attribute on a path enables end-of-line normalization"
"When text is set to "auto", the path is marked for automatic
end-of-line conversion"
Unless the reader is already familiar with the two variants, there's a
high probability that they will think that "end-of-line normalization"
is the same thing as "automatic end-of-line conversion".
It's also not clear that the phrase "When the file has been committed
with CRLF, no conversion is done" in the paragraph for text=auto does
not apply equally to the bare text attribute which is described earlier.
Moreover, it falsely implies that normalization is only suppressed if
the file has been committed. In fact, running `git add` on a CRLF file,
adding the text=auto attribute to the file, and running `git add` again
does not do anything to the line endings either.
On top of that, in several places the documentation for the eol
attribute sounds like either it does not affect normalization on checkin
or it forces normalization on checkin. It also sounds like setting eol
(or setting a config variable) is required to turn on conversion on
checkout, but the text attribute can turn on conversion on checkout by
itself if eol is unspecified.
Rephrase the documentation of text, text=auto, eol, eol=crlf, and eol=lf
to be clear about how they are the same, how they are different, and in
what cases conversion is performed.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests in t2019-checkout-ambiguous-ref.sh redirect two invocations of
"git checkout" to files "stdout" and "stderr". Several assertions are
made using file "stderr". File "stdout", however, is unused.
Don't redirect standard output of "git checkout" to file "stdout" in
t2019-checkout-ambiguous-ref.sh to avoid creating unnecessary files.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three tests in file t1502-rev-parse-parseopt.sh use three redirections
with invocation of "git rev-parse --parseopt --". All three tests
redirect standard output to file "out" and file "spec" to standard
input. Two of the tests redirect standard output a second time to file
"actual", and the third test redirects standard error to file "err".
These tests check contents of files "actual" and "err", but don't use
the files named "out" for assertions. The two tests that redirect to
standard output twice might also be confusing to the reader.
Don't redirect standard output of "git rev-parse" to file "out" in
t1502-rev-parse-parseopt.sh to avoid creating unnecessary files.
Acked-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 'fsck error and recovery on invalid object type' in file
t1450-fsck.sh redirects output of a failing "git fsck" invocation to
files "out" and "err" to assert presence of error messages in the output
of the command. Commit 31deb28f5e (fsck: don't hard die on invalid
object types, 2021-10-01) changed the way assertions in this test are
performed. The test doesn't compare the whole standard error with
prepared file "err.expect" and it doesn't assert that standard output is
empty.
Don't create unused files "err.expect" and "out" in test 'fsck error and
recovery on invalid object type'.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three tests in t1300-config.sh check that "git config --get" barfs when
syntax errors are present in the config file. The tests redirect
standard output and standard error of "git config --get" to files,
"actual" and "error" correspondingly. They assert presence of an error
message in file "error". However, these tests don't use file "actual"
for assertions.
Don't redirect standard output of "git config --get" to file "actual" in
t1300-config.sh to avoid creating unnecessary files.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three tests in t1300-config.sh check that "git config --get" barfs when
the config file contains various syntax errors: key=value pair without
equals sign, broken section line, and broken value string. The sample
config files include a comment describing the kind of broken syntax.
This description seems to have been copy-pasted from the "broken section
line" sample to the other two samples.
Fix descriptions of broken config file syntax in samples used in
t1300-config.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 'credential config with partial URLs' in t0300-credentials.sh
contains three "git credential fill" invocations. For two of the
invocations, the test asserts presence or absence of string "yep" in the
standard output. For the third test it checks for an error message in
standard error.
Don't redirect standard output of "git credential" to file "stdout" in
t0300-credentials.sh to avoid creating an unnecessary file when only
standard error is checked.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to render callouts for manpages comes from 17 years ago:
776e994af5 (Properly render asciidoc "callouts" in git man pages.,
2006-04-28), and it was needed back then, but DocBook Stylesheets added
support for that in 2008 [1], since 1.74.0 it hasn't been necessary.
What's worse: the format of the upstream callouts is much nicer than our
hacked version.
Compare this:
$ git diff (1)
$ git diff --cached (2)
$ git diff HEAD (3)
1. Changes in the working tree not yet staged for the next
commit.
2. Changes between the index and your last commit; what you
would be committing if you run git commit without -a
option.
3. Changes in the working tree since your last commit; what
you would be committing if you run git commit -a
To this:
$ git diff (1)
$ git diff --cached (2)
$ git diff HEAD (3)
1. Changes in the working tree not yet staged for the next commit.
2. Changes between the index and your last commit; what you would
be committing if you run git commit without -a option.
3. Changes in the working tree since your last commit; what you
would be committing if you run git commit -a
Let's drop our unnecessary inferior custom format and use the official
one.
[1] https://sourceforge.net/p/docbook/code/7842/
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of the default "negotiator", used to find common
ancestor over the network for object tranfer, used to be recursive;
it was updated to be iterative to conserve stackspace usage.
* hx/negotiator-non-recursive:
negotiator/skipping: fix some problems in mark_common()
negotiator/default: avoid stack overflow
The implementation of credential helpers used fgets() over fixed
size buffers to read protocol messages, causing the remainder of
the folded long line to trigger unexpected behaviour, which has
been corrected.
* tb/credential-long-lines:
contrib/credential: embiggen fixed-size buffer in wincred
contrib/credential: avoid fixed-size buffer in libsecret
contrib/credential: .gitignore libsecret build artifacts
contrib/credential: remove 'gnome-keyring' credential helper
contrib/credential: avoid fixed-size buffer in osxkeychain
t/lib-credential.sh: ensure credential helpers handle long headers
credential.c: store "wwwauth[]" values in `credential_read()`
Jeff King
Shuqi Liang
Junio C Hamano
Nico Rieck
Johannes Schindelin
Josh Soref
Teng Long
John Cai
M Hickford
Felipe Contreras
Sohom Datta
Alex Henrie
Andrei Rybak