Fix a formatting regression in 1b81d8cb19 (help: use command-list.txt
for the source of guides, 2018-05-20). Adjust the output of "git help
--guides" and any other future single-section commands so that a
newline isn't inserted before the only section being printed.
This changes the output from:
$ git help --guides
The Git concept guides are:
[...]
To:
$ git help --guides
The Git concept guides are:
[...]
That we started printing an extra "\n" in 1b81d8cb19 wasn't intended,
but an emergent effect of moving all of the printing of "git help"
output to code that was ready to handle printing N sections.
With 1b81d8cb19 we started using the "print_cmd_by_category()"
function added earlier in the same series, or in cfb22a02ab (help:
use command-list.h for common command list, 2018-05-10).
Fixing this formatting nit is easy enough. Let's have all of the
output that would like to be "\n"-separated from other lines emit its
own "\n". We then adjust "print_cmd_by_category()" to only print a
"\n" to delimit the sections it's printing out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to only emit git's own usage information under
--all. This also allows us to extend the "test_section_spacing" tests
added in a preceding commit to test "git help --all"
output.
Previously we could not do that, as the tests might find a git-*
command in the "$PATH", which would make the output differ from one
setup to another.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the listing of commands and aliases from
list_all_cmds_help(). This will make a subsequent functional change
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code in "help.c" that used printf_ln() without format
specifiers to use puts() instead, as other existing code in the file
does. Let's also change related code to use puts() instead of the
equivalent of calling "printf" with a "%s\n" format.
This formatting-only change will make a subsequent functional change
easier to read, as it'll be changing code that's consistently using
the same functions to do the same things.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three callsites of git_prompt() helper function that ask a
"yes/no" question to the end user, but one of them in help.c that
asks if the suggested auto-correction is OK, which is given when the
user makes a possible typo in a Git subcommand name, is formatted
differently from the others.
Update the format string to make the prompt string look more
consistent.
Signed-off-by: Kashav Madan <kshvmdn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git_config() call was added in dbfae68969 (help: reuse
print_columns() for help -a, 2012-04-13) to read the column config
we'd always use the resulting "colopts" variable.
Then in 63eae83f8f (help: add "-a --verbose" to list all commands
with synopsis, 2018-05-20) we started only using the "colopts" config
under "--all" if "--no-verbose" was also given, but the "git_config()"
call was not moved inside the "verbose" branch of the code.
This change effectively does that, we'll only call list_commands()
under "--all --no-verbose", so let's have it look up the config it
needs. See 26c7d06783 (help -a: improve and make --verbose default, 2018-09-29) for another case in help.c where we look up config.
The get_colopts() function is named for consistency with the existing
get_alias() function added in 26c7d06783.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While help.autocorrect can be set to 0 to decline auto-execution of
possibly mistyped commands, it still spends cycles to compute the
suggestions, and it wastes screen real estate.
Update help.autocorrect to accept the string "never" to just exit
with error upon mistyped commands to help users who prefer to never
see suggested corrections at all.
While at it, introduce "immediate" as a more readable way to
immediately execute the auto-corrected command, which can be done
with negative value.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building with SKIP_DASHED_BUILT_INS=YesPlease, the built-in
commands are no longer present in the `PATH` as hardlinks to `git`.
As a consequence, `load_command_list()` needs to be taught to find the
names of the built-in commands from elsewhere.
This only affected the output of `git --list-cmds=main`, but not the
output of `git help -a` because the latter includes the built-in
commands by virtue of them being listed in command-list.txt.
The bug was detected via a patch series that turns the merge strategies
included in Git into built-in commands: `git merge -s help` relies on
`load_command_list()` to determine the list of available merge
strategies.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
There are two functions to get a single config string:
- git_config_get_string()
- git_config_get_string_const()
One might naively think that the first one allocates a new string and
the second one just points us to the internal configset storage. But
in fact they both allocate a new copy; the second one exists only to
avoid having to cast when using it with a const global which we never
intend to free.
The documentation for the function explains that clearly, but it seems
I'm not alone in being surprised by this. Of 17 calls to the function,
13 of them leak the resulting value.
We could obviously fix these by adding the appropriate free(). But it
would be simpler still if we actually had a non-allocating way to get
the string. There's git_config_get_value() but that doesn't quite do
what we want. If the config key is present but is a boolean with no
value (e.g., "[foo]bar" in the file), then we'll get NULL (whereas the
string versions will print an error and die).
So let's introduce a new variant, git_config_get_string_tmp(), that
behaves as these callers expect. We need a new name because we have new
semantics but the same function signature (so even if we converted the
four remaining callers, topics in flight might be surprised). The "tmp"
is because this value should only be held onto for a short time. In
practice it's rare for us to clear and refresh the configset,
invalidating the pointer, but hopefully the "tmp" makes callers think
about the lifetime. In each of the converted cases here the value only
needs to last within the local function or its immediate caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1b81d8cb19 (help: use command-list.txt for the source of guides,
2018-05-20), all man5/man7 guides listed in command-list.txt appear in
the output of 'git help -g'.
However, 'git help -g' still prefixes this list with "The common Git
guides are:", which makes one wonder if there are others!
In the same spirit, the man page for 'git help' describes the '--guides'
option as listing 'useful' guides, which is not false per se but can
also be taken to mean that there are other guides that exist but are not
useful.
Instead of 'common' and 'useful', use 'Git concept guides' in both
places. To keep the code in line with this change, rename
help.c::list_common_guides_help to list_guides_help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It may be useful to know which shell Git was built to try to point to,
in the event that shell-based Git commands are failing. $SHELL_PATH is
set during the build and used to launch the manpage viewer, as well as
by git-compat-util.h, and it's used during tests. 'git version
--build-options' is encouraged for use in bug reports, so it makes sense
to include this information there.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Knowing which version of Git a user has and how it was built allows us
to more precisely pin down the circumstances when a certain issue
occurs, so teach bugreport how to tell us the same output as 'git
version --build-options'.
It's not ideal to directly call 'git version --build-options' because
that output goes to stdout. Instead, wrap the version string in a helper
within help.[ch] library, and call that helper from within the bugreport
library.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting in 3ac68a93fd, help.o began to depend on builtin/branch.o,
builtin/clean.o, and builtin/config.o. This meant that help.o was
unusable outside of the context of the main Git executable.
To make help.o usable by other commands again, move list_config_help()
into builtin/help.c (where it makes sense to assume other builtin libraries
are present).
When command-list.h is included but a member is not used, we start to
hear a compiler warning. Since the config list is generated in a fairly
different way than the command list, and since commands and config
options are semantically different, move the config list into its own
header and move the generator into its own script and build rule.
For reasons explained in 976aaedc (msvc: add a Makefile target to
pre-generate the Visual Studio solution, 2019-07-29), some build
artifacts we consider non-source files cannot be generated in the
Visual Studio environment, and we already have some Makefile tweaks
to help Visual Studio to use generated command-list.h header file.
Do the same to a new generated file, config-list.h, introduced by
this change.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Announce that calling help_unknown_ref() exits the program.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the code to show args with potential typo that cannot be
interpreted as a commit-ish.
* jk/help-unknown-ref-fix:
help_unknown_ref(): check for refname ambiguity
help_unknown_ref(): duplicate collected refnames
When the user asks to merge "foo" and we suggest "origin/foo" instead,
we do so by simply chopping off "refs/remotes/" from the front of the
suggested ref. This is usually fine, but it's possible that the
resulting name is ambiguous (e.g., you have "refs/heads/origin/foo",
too).
Let's use shorten_unambiguous_ref() to do this the right way, which
should usually yield the same "origin/foo", but "remotes/origin/foo" if
necessary.
Note that in this situation there may be other options (e.g., we could
suggest "heads/origin/foo" as well). I'll leave that up for debate; the
focus here is just to avoid giving advice that does not actually do what
we expect.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git merge" sees an unknown refname, we iterate through the refs to
try to suggest some possible alternates. We do so with for_each_ref(),
and in the callback we add some of the refnames we get to a
string_list that is declared with NODUP, directly adding a pointer into
the refname string our callback received.
But the for_each_ref() machinery does not promise that the refname
string will remain valid, and as a result we may print garbage memory.
The code in question dates back to its inception in e56181060e (help:
add help_unknown_ref(), 2013-05-04). But back then, the refname strings
generally did remain stable, at least immediately after the
for_each_ref() call. Later, in d1cf15516f (packed_ref_iterator_begin():
iterate using `mmapped_ref_iterator`, 2017-09-25), we started
consistently re-using a separate buffer for packed refs.
The fix is simple: duplicate the strings we intend to collect. We
already call string_list_clear(), so the memory is correctly freed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6532f3740b ("completion: allow to customize the completable
command list", 2018-05-20) tried to allow multiple space-separated
entries in completion.commands. To do this, it copies each parsed token
into a strbuf so that the result is NUL-terminated.
However, for tokens starting with "-", it accidentally passes the
original non-terminated string, meaning that only the final one worked.
Switch to using the strbuf.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally code that is checking config before we've decided to do
setup_git_directory() would use read_early_config(), which uses
discover_git_directory() to tentatively see if we're in a repo,
and if so to add it to the config sequence.
But list_cmds() uses the caching configset mechanism which
rightly does not use read_early_config(), because it has no
idea if it's being called early.
Call setup_git_directory_gently() so we can pick up repo-level
config (like completion.commands).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"longest" is used to determine how many extra spaces we need to print
to keep the command description aligned. For the longest command, we
should print no extra space instead of one, or we'll get unaligned
output like this (notice the "checkout" line):
grow, mark and tweak your common history
branch List, create, or delete branches
checkout Switch branches or restore working tree files
commit Record changes to the repository
diff Show changes between commits, commit and ...
merge Join two or more development histories together
rebase Reapply commits on top of another base tip
tag Create, list, delete or verify a tag ...
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take pains to determine the longest command beforehand, so that we
can align the category column after printing the command names.
However, then we re-use that value when printing the aliases. If any
alias name is longer than the longest command name, we consequently try
to add a negative number of spaces (but `mput_char()` does not expect
any negative values and simply decrements until the value is 0, i.e.
it tries to add close to 2**31 spaces).
Let's fix this by adjusting the `longest` variable before printing the
aliases.
This fixes https://github.com/git-for-windows/git/issues/1975.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you type "git help" (or just "git") you are greeted with a list
with commonly used commands and their short description and are
suggested to use "git help -a" or "git help -g" for more details.
"git help -av" would be more friendly and inline with what is shown
with "git help" since it shows list of commands with description as
well, and commands are properly grouped.
"help -av" does not show everything "help -a" shows though. Add
external command section in "help -av" for this. While at there, add a
section for aliases as well (until now aliases have no UI, just "git
config").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sideband code learned to optionally paint selected keywords at
the beginning of incoming lines on the receiving end.
* hn/highlight-sideband-keywords:
sideband: do not read beyond the end of input
sideband: highlight keywords in remote sideband output
The http-backend (used for smart-http transport) used to slurp the
whole input until EOF, without paying attention to CONTENT_LENGTH
that is supplied in the environment and instead expecting the Web
server to close the input stream. This has been fixed.
* mk/http-backend-content-length:
t5562: avoid non-portable "export FOO=bar" construct
http-backend: respect CONTENT_LENGTH for receive-pack
http-backend: respect CONTENT_LENGTH as specified by rfc3875
http-backend: cleanup writing to child process
The colorization is controlled with the config setting "color.remote".
Supported keywords are "error", "warning", "hint" and "success". They
are highlighted if they appear at the start of the line, which is
common in error messages, eg.
ERROR: commit is missing Change-Id
The Git push process itself prints lots of non-actionable messages
(eg. bandwidth statistics, object counters for different phases of the
process). This obscures actionable error messages that servers may
send back. Highlighting keywords in the sideband draws more attention
to those messages.
The background for this change is that Gerrit does server-side
processing to create or update code reviews, and actionable error
messages (eg. missing Change-Id) must be communicated back to the user
during the push. User research has shown that new users have trouble
seeing these messages.
The highlighting is done on the client rather than server side, so
servers don't have to grow capabilities to understand terminal escape
codes and terminal state. It also consistent with the current state
where Git is control of the local display (eg. prefixing messages with
"remote: ").
The highlighting can be configured using color.remote.<KEYWORD>
configuration settings. Since the keys are matched case insensitively,
we match the keywords case insensitively too.
Finally, this solution is backwards compatible: many servers already
prefix their messages with "error", and they will benefit from this
change without requiring a server update. By contrast, a server-side
solution would likely require plumbing the TERM variable through the
git protocol, so it would require changes to both server and client.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push passes to another commands, as described in
https://public-inbox.org/git/20171129032214.GB32345@sigill.intra.peff.net/
As it gets complicated to correctly track the data length, instead transfer
the data through parent process and cut the pipe as the specified length is
reached. Do it only when CONTENT_LENGTH is set, otherwise pass the input
directly to the forked commands.
Add tests for cases:
* CONTENT_LENGTH is set, script's stdin has more data, with all combinations
of variations: fetch or push, plain or compressed body, correct or truncated
input.
* CONTENT_LENGTH is specified to a value which does not fit into ssize_t.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
The new help option --config-for-completion is a machine friendlier
version of --config where all the placeholders and wildcards are
dropped, leaving only the good, completable prefixes for
git-completion.bash to consume.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.
This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
By default we show porcelain, external commands and a couple others
that are also popular. If you are not happy with this list, you can
now customize it a new config variable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The help command currently hard codes the list of guides and their
summary in C. Let's move this list to command-list.txt. This lets us
extract summary lines from Documentation/git*.txt. This also
potentially lets us list guides in git.txt, but I'll leave that for
now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lists all recognized commands [1] by category. The group order
follows closely git.txt.
[1] We may actually show commands that are not built (e.g. if you set
NO_PERL you don't have git-instaweb but it's still listed here). I
ignore the problem because on Linux a git package could be split
anyway. The "git-core" package may not contain git-instaweb even if
it's built because it may end up in a separate package. We can't know
anyway.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to select any group of commands by a category defined
in command-list.txt. This is an internal/hidden option so we don't
have to be picky about the category name or worried about exposing too
much.
This will be used later by git-completion.bash to retrieve certain
command groups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is part of the effort to break down and provide commands by
category in machine-readable form. This could be helpful later on when
completion script switches to use --list-cmds for selecting
completable commands. It would be much easier for the user to choose
to complete _all_ commands instead of the default selection by passing
different values to --list-cmds in git-completino.bash.
While at there, replace "git help -a" in git-completion.bash with
--list-cmds since it's better suited for this task.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added code generation for all_cmd_desc[] which
includes almost everything we need to generate common command list.
Convert help code to use that array instead and drop common_cmds[] array.
The description of each common command group is removed from
command-list.txt. This keeps this file format simpler. common-cmds.h
will not be generated correctly after this change due to the
command-list.txt format change. But it does not matter and
common-cmds.h will be removed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
In particular when local tags are used (or tags that are pushed to some
fork) to build Git, it is very hard to figure out from which particular
revision a particular Git executable was built. It gets worse when those
tags are deleted, or even updated.
Let's just report an exact, unabbreviated commit name in our build
options.
We need to be careful, though, to report when the current commit cannot
be determined, e.g. when building from a tarball without any associated
Git repository. This could be the case also when extracting Git's source
code into an unrelated Git worktree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful for bug reports to include information about the
environment in which the bug occurs. "git version --build-options" can
help to supplement this information. In addition to the size of 'long'
already reported by --build-options, also report the host's CPU type.
Example output:
$ git version --build-options
git version 2.9.3.windows.2.826.g06c0f2f
cpu: x86_64
sizeof-long: 4
New Makefile variable HOST_CPU supports cross-compiling.
Suggested-by: Adric Norris <landstander668@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
When help.autoCorrect is enabled, an invalid git command prints a
warning and a continuation message, which differs depending on
whether or not the value of help.autoCorrect is positive or
negative.
With help.autoCorrect = 15:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'
in 1.5 seconds automatically...
With help.autoCorrect < 0:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'
The continuation message's phrasing is awkward. This commit cleans it up.
As a bonus, we now use full-sentence strings which make translation easier.
With help.autoCorrect = 15:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing in 1.5 seconds, assuming that you meant 'log'.
With help.autoCorrect < 0:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git $cmd -h" for builtin commands calls the implementation of the
command (i.e. cmd_$cmd() function) without doing any repository
set-up, and the commands that expect RUN_SETUP is done by the Git
potty needs to be prepared to show the help text without barfing.
* jk/consistent-h:
t0012: test "-h" with builtins
git: add hidden --list-builtins option
version: convert to parse-options
diff- and log- family: handle "git cmd -h" early
submodule--helper: show usage for "-h"
remote-{ext,fd}: print usage message on invalid arguments
upload-archive: handle "-h" option early
credential: handle invalid arguments earlier
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason
Kashav Madan
Azeem Bande-Ali
Drew DeVault
Johannes Schindelin
Junio C Hamano
Jeff King
Philippe Blain
Emily Shaffer
Elijah Newren
René Scharfe
Nguyễn Thái Ngọc Duy
Han-Wen Nienhuys
Max Kirillov
Stefan Beller
Eric Sunshine
Marc Branchaud