Adjust several files to be more explicit about their dependency on
replace-objects to accommodate this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions were all defined in a separate ident.c already, so
create ident.h and move the declarations into that file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'cat-file' gains mailmap support for its '--batch-check' and '-s'
options.
* sa/cat-file-mailmap--batch-check:
cat-file: add mailmap support to --batch-check option
cat-file: add mailmap support to -s option
Even though the cat-file command with `--batch-check` option does not
complain when `--use-mailmap` option is given, the latter option is
ignored. Compute the size of the object after replacing the idents and
report it instead.
In order to make `--batch-check` option honour the mailmap mechanism we
have to read the contents of the commit/tag object.
There were two ways to do it:
1. Make two calls to `oid_object_info_extended()`. If `--use-mailmap`
option is given, the first call will get us the type of the object
and second call will only be made if the object type is either a
commit or tag to get the contents of the object.
2. Make one call to `oid_object_info_extended()` to get the type of the
object. Then, if the object type is either of commit or tag, make a
call to `repo_read_object_file()` to read the contents of the object.
I benchmarked the following command with both the above approaches and
compared against the current implementation where `--use-mailmap`
option is ignored:
`git cat-file --use-mailmap --batch-all-objects --batch-check --buffer
--unordered`
The results can be summarized as follows:
Time (mean ± σ)
default 827.7 ms ± 104.8 ms
first approach 6.197 s ± 0.093 s
second approach 1.975 s ± 0.217 s
Since, the second approach is faster than the first one, I implemented
it in this patch.
The command git cat-file can now use the mailmap mechanism to replace
idents with canonical versions for commit and tag objects. There are
several options like `--batch`, `--batch-check` and `--batch-command`
that can be combined with `--use-mailmap`. But the documentation for
`--batch`, `--batch-check` and `--batch-command` doesn't say so. This
patch fixes that documentation.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `-s` option does not complain when
`--use-mailmap` option is given, the latter option is ignored. Compute
the size of the object after replacing the idents and report it instead.
In order to make `-s` option honour the mailmap mechanism we have to
read the contents of the commit/tag object. Make use of the call to
`oid_object_info_extended()` to get the contents of the object and store
in `buf`. `buf` is later freed in the function.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "USE_THE_INDEX_COMPATIBILITY_MACROS" into that setting
and a more narrow "USE_THE_INDEX_VARIABLE". In the case of these
built-ins we only need "the_index" variable, but not the compatibility
wrapper for functions we're not using.
Let's then have some users of "USE_THE_INDEX_COMPATIBILITY_MACROS" use
this more narrow and descriptive define.
For context: The USE_THE_INDEX_COMPATIBILITY_MACROS macro was added to
test-tool.h in f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in db9d67f2e9 (builtin/cat-file.c: support NUL-delimited
input with `-z`, 2022-07-22), before that change the SYNOPSIS and "-h"
output were the same, but not afterwards.
That change followed a similar earlier divergence in
473fa2df08 (Documentation: add --batch-command to cat-file synopsis,
2022-04-07). Subsequent commits will fix this sort of thing more
systematically, but let's fix this one as a one-off.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Operating modes like "--batch" of "git cat-file" command learned to
take NUL-terminated input, instead of one-item-per-line.
* tb/cat-file-z:
builtin/cat-file.c: support NUL-delimited input with `-z`
t1006: extract --batch-command inputs to variables
"git cat-file" learned an option to use the mailmap when showing
commit and tag objects.
* sa/cat-file-mailmap:
cat-file: add mailmap support
ident: rename commit_rewrite_person() to apply_mailmap_to_header()
ident: move commit_rewrite_person() to ident.c
revision: improve commit_rewrite_person()
When callers are using `cat-file` via one of the stdin-driven `--batch`
modes, all input is newline-delimited. This presents a problem when
callers wish to ask about, e.g. tree-entries that have a newline
character present in their filename.
To support this niche scenario, introduce a new `-z` mode to the
`--batch`, `--batch-check`, and `--batch-command` suite of options that
instructs `cat-file` to treat its input as NUL-delimited, allowing the
individual commands themselves to have newlines present.
The refactoring here is slightly unfortunate, since we turn loops like:
while (strbuf_getline(&buf, stdin) != EOF)
into:
while (1) {
int ret;
if (opt->nul_terminated)
ret = strbuf_getline_nul(&input, stdin);
else
ret = strbuf_getline(&input, stdin);
if (ret == EOF)
break;
}
It's tempting to think that we could use `strbuf_getwholeline()` and
specify either `\n` or `\0` as the terminating character. But for input
on platforms that include a CR character preceeding the LF, this
wouldn't quite be the same, since `strbuf_getline(...)` will trim any
trailing CR, while `strbuf_getwholeline(&buf, stdin, '\n')` will not.
In the future, we could clean this up further by introducing a variant
of `strbuf_getwholeline()` that addresses the aforementioned gap, but
that approach felt too heavy-handed for this pair of uses.
Some tests are added in t1006 to ensure that `cat-file` produces the
same output in `--batch`, `--batch-check`, and `--batch-command` modes
with and without the new `-z` option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cat-file is used by tools like GitLab to get commit tag contents
that are then displayed to users. This content which has author,
committer or tagger information, could benefit from passing through the
mailmap mechanism before being sent or displayed.
This patch adds --[no-]use-mailmap command line option to the git
cat-file command. It also adds --[no-]mailmap option as an alias to
--[no-]use-mailmap.
This patch also introduces new test cases to test the mailmap mechanism in
git cat-file command.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak where "cat-file" will leak the "path" member. See
e5fba602e5 (textconv: support for cat_file, 2010-06-15) for the code
that introduced the offending get_oid_with_context() call (called
get_sha1_with_context() at the time).
As a result we can mark several tests as passing with SANITIZE=leak
using "TEST_PASSES_SANITIZE_LEAK=true".
As noted in dc944b65f1 (get_sha1_with_context: dynamically allocate
oc->path, 2017-05-19) callers must free the "path" member. That same
commit added the relevant free() to this function, but we weren't
catching cases where we'd return early.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 440c705ea6 (cat-file: add
--batch-command mode, 2022-02-18). The free_cmds() function was only
called on "queued_nr" if we had a "flush" command. As the "without
flush for blob info" test added in the same commit shows we can't rely
on that, so let's call free_cmds() again at the end.
Since "nr" follows the usual pattern of being set to 0 if we've
free()'d the memory already it's OK to call it twice, even in cases
where we are doing a "flush".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize away strbuf_expand() call with a hardcoded formatting logic
specific for the default format in the --batch and --batch-check
options of "git cat-file".
* jc/cat-file-batch-default-format-optim:
cat-file: skip expanding default format
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
When format is passed into --batch, --batch-check, --batch-command,
the format gets expanded. When nothing is passed in, the default format
is set and the expand_format() gets called.
We can save on these cycles by hardcoding how to print the
information when nothing is passed as the format, or when the default
format is passed. There is no need for the fully expanded format with
the default. Since batch_object_write() happens on every object provided
in batch mode, we get a nice performance improvement.
git rev-list --all > /tmp/all-obj.txt
git cat-file --batch-check </tmp/all-obj.txt
with HEAD^:
Time (mean ± σ): 57.6 ms ± 1.7 ms [User: 51.5 ms, System: 6.2 ms]
Range (min … max): 54.6 ms … 64.7 ms 50 runs
with HEAD:
Time (mean ± σ): 49.8 ms ± 1.7 ms [User: 42.6 ms, System: 7.3 ms]
Range (min … max): 46.9 ms … 55.9 ms 56 runs
If nothing is provided as a format argument, or if the default format is
passed, skip expanding of the format and print the object info with a
default format.
See https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the read_object_with_reference() function to take an "enum
object_type". It was not prepared to handle an arbitrary "const
char *type", as it was itself calling type_from_string().
Let's change the only caller that passes in user data to use
type_from_string(), and convert the rest to use e.g. "OBJ_TREE"
instead of "tree_type".
The "cat-file" caller is not on the codepath that
handles"--allow-unknown", so the type_from_string() there is safe. Its
use of type_from_string() doesn't functionally differ from that of the
pre-image.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new flag --batch-command that accepts commands and arguments
from stdin, similar to git-update-ref --stdin.
At GitLab, we use a pair of long running cat-file processes when
accessing object content. One for iterating over object metadata with
--batch-check, and the other to grab object contents with --batch.
However, if we had --batch-command, we wouldn't need to keep both
processes around, and instead just have one --batch-command process
where we can flip between getting object info, and getting object
contents. Since we have a pair of cat-file processes per repository,
this means we can get rid of roughly half of long lived git cat-file
processes. Given there are many repositories being accessed at any given
time, this can lead to huge savings.
git cat-file --batch-command
will enter an interactive command mode whereby the user can enter in
commands and their arguments that get queued in memory:
<command1> [arg1] [arg2] LF
<command2> [arg1] [arg2] LF
When --buffer mode is used, commands will be queued in memory until a
flush command is issued that execute them:
flush LF
The reason for a flush command is that when a consumer process (A)
talks to a git cat-file process (B) and interactively writes to and
reads from it in --buffer mode, (A) needs to be able to control when
the buffer is flushed to stdout.
Currently, from (A)'s perspective, the only way is to either
1. kill (B)'s process
2. send an invalid object to stdin.
1. is not ideal from a performance perspective as it will require
spawning a new cat-file process each time, and 2. is hacky and not a
good long term solution.
With this mechanism of queueing up commands and letting (A) issue a
flush command, process (A) can control when the buffer is flushed and
can guarantee it will receive all of the output when in --buffer mode.
--batch-command also will not allow (B) to flush to stdout until a flush
is received.
This patch adds the basic structure for adding command which can be
extended in the future to add more commands. It also adds the following
two commands (on top of the flush command):
contents <object> LF
info <object> LF
The contents command takes an <object> argument and prints out the object
contents.
The info command takes an <object> argument and prints out the object
metadata.
These can be used in the following way with --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
flush LF
info <object> LF
flush LF
When used without --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
info <object> LF
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch introduces a new --batch-command flag. Including --batch
and --batch-check, we will have a total of three batch modes. print_contents
is the only boolean on the batch_options sturct used to distinguish
between the different modes. This makes the code harder to read.
To reduce potential confusion, replace print_contents with an enum to
help readability and clarity.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will add an enum on the batch_options struct that
indicates which type of batch operation will be used: --batch,
--batch-check and the soon to be --batch-command that will read
commands from stdin. --batch-command mode might get confused with
the cmdmode flag.
There is value in renaming cmdmode in any case. cmdmode refers to how
the result output of the blob will be transformed, either according to
--filter or --textconv. So transform_mode is a more descriptive name
for the flag.
Rename cmdmode to transform_mode in cat-file.c
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo in my recent 03dc51fe849 (cat-file: fix remaining usage
bugs, 2021-10-09).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix up whitespace issues around "(... | ...)" in the SYNOPSIS and
usage. These were introduced in ab/cat-file series. See
e145efa605 (Merge branch 'ab/cat-file' into next, 2022-01-05). In
particular 57d6a1cf96, 5a40417876 and 97fe725075 in that series.
We'll now correctly emit this usage output:
$ git cat-file -h
usage: git cat-file <type> <object>
or: git cat-file (-e | -p) <object>
or: git cat-file (-t | -s) [--allow-unknown-type] <object>
[...]
Before this the last line of that would be inconsistent with the
preceding "(-e | -p)":
or: git cat-file ( -t | -s ) [--allow-unknown-type] <object>
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the cat_one_file() logic that calls get_oid_with_context()
under --textconv and --filters to use the GET_OID_ONLY_TO_DIE flag,
thus improving the error messaging emitted when e.g. <path> is missing
but <rev> is not.
To service the "cat-file" use-case we need to introduce a new
"GET_OID_REQUIRE_PATH" flag, otherwise it would exit early as soon as
a valid "HEAD" was resolved, but in the "cat-file" case being changed
we always need a valid revision and path.
This arguably makes the "<bad rev>:<bad path>" and "<bad
rev>:<good (in HEAD) path>" use cases worse, as we won't quote the
<path> component at the user anymore, but let's just use the existing
logic "git log" et al use for now. We can improve the messaging for
those cases as a follow-up for all callers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage output emitted on "git cat-file -h" to group related
options, making it clear to users which options go with which other
ones.
The new output is:
Check object existence or emit object contents
-e check if <object> exists
-p pretty-print <object> content
Emit [broken] object attributes
-t show object type (one of 'blob', 'tree', 'commit', 'tag', ...)
-s show object size
--allow-unknown-type allow -s and -t to work with broken/corrupt objects
Batch objects requested on stdin (or --batch-all-objects)
--batch[=<format>] show full <object> or <rev> contents
--batch-check[=<format>]
like --batch, but don't emit <contents>
--batch-all-objects with --batch[-check]: ignores stdin, batches all known objects
Change or optimize batch output
--buffer buffer --batch output
--follow-symlinks follow in-tree symlinks
--unordered do not order objects before emitting them
Emit object (blob or tree) with conversion or filter (stand-alone, or with batch)
--textconv run textconv on object's content
--filters run filters on object's content
--path blob|tree use a <path> for (--textconv | --filters ); Not with 'batch'
The old usage was:
<type> can be one of: blob, tree, commit, tag
-t show object type
-s show object size
-e exit with zero when there's no error
-p pretty-print object's content
--textconv for blob objects, run textconv on object's content
--filters for blob objects, run filters on object's content
--batch-all-objects show all objects with --batch or --batch-check
--path <blob> use a specific path for --textconv/--filters
--allow-unknown-type allow -s and -t to work with broken/corrupt objects
--buffer buffer --batch output
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
--follow-symlinks follow in-tree symlinks (used with --batch or --batch-check)
--unordered do not order --batch-all-objects output
While shorter, I think the new one is easier to understand, as
e.g. "--allow-unknown-type" is grouped with "-t" and "-s", as it can
only be combined with those options. The same goes for "--buffer",
"--unordered" etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the migration of --batch-all-objects to OPT_CMDMODE() in the
preceding commit one bug with combining it and other OPT_CMDMODE()
options was solved, but we were still left with e.g. --buffer silently
being discarded when not in batch mode.
Fix all those bugs, and in addition emit errors telling the user
specifically what options can't be combined with what other options,
before this we'd usually just emit the cryptic usage text and leave
the users to work it out by themselves.
This change is rather large, because to do so we need to untangle the
options processing so that we can not only error out, but emit
sensible errors, and e.g. emit errors about options before errors
about stray argc elements (as they might become valid if the option
were removed).
Some of the output changes ("error:" to "fatal:" with
usage_msg_opt[f]()), but none of the exit codes change, except in
those cases where we silently accepted bad option combinations before,
now we'll error out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage of OPT_CMDMODE() in "cat-file"[1] was added in parallel with
the development of[3] the --batch-all-objects option[4], so we've
since grown[5] checks that it can't be combined with other command
modes, when it should just be made a top-level command-mode
instead. It doesn't combine with --filters, --textconv etc.
By giving parse_options() information about what options are mutually
exclusive with one another we can get the die() message being removed
here for free, we didn't even use that removed message in some cases,
e.g. for both of:
--batch-all-objects --textconv
--batch-all-objects --filters
We'd take the "goto usage" in the "if (opt)" branch, and never reach
the previous message. Now we'll emit e.g.:
$ git cat-file --batch-all-objects --filters
error: option `filters' is incompatible with --batch-all-objects
1. b48158ac94 (cat-file: make the options mutually exclusive, 2015-05-03)
2. https://lore.kernel.org/git/xmqqtwspgusf.fsf@gitster.dls.corp.google.com/
3. https://lore.kernel.org/git/20150622104559.GG14475@peff.net/
4. 6a951937ae (cat-file: add --batch-all-objects option, 2015-06-22)
5. 321459439e (cat-file: support --textconv/--filters in batch mode, 2016-09-09)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no benefit to defining this at a distance, and it makes the
code harder to read as you've got to scroll up to see the usage that
corresponds to the options.
In subsequent commits I'll make use of usage_msg_opt(), which will be
quite noisy if I have to use the long "cat_file_usage" variable,
there's no other command being defined in this file, so let's rename
it to just "usage".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were various inaccuracies in the previous SYNOPSIS output,
e.g. "--path" is not something that can optionally go with any options
except --textconv or --filters, as the output implied.
The opening line of the DESCRIPTION section is also "In its first
form[...]", which refers to "git cat-file <type> <object>", but the
SYNOPSIS section wasn't showing that as the first form!
That part of the documentation made sense in
d83a42f34a (Documentation: minor grammatical fixes in
git-cat-file.txt, 2009-03-22) when it was introduced, but since then
various options that were added have made that intro make no sense in
the context it was in. Now the two will match again.
The usage output here is not properly aligned on "master" currently,
but will be with my in-flight 4631cfc20b (parse-options: properly
align continued usage output, 2021-09-21), so let's indent things
correctly in the C code in anticipation of that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "cat-file --batch-all-objects" iterates over each object, it knows
where to find each one. But when we look up details of the object, we
don't use that information at all.
This patch teaches it to use the pack/offset pair when we're iterating
over objects in a pack. This yields a measurable speed improvement
(timings on a fully packed clone of linux.git):
Benchmark #1: ./git.old cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
Time (mean ± σ): 8.128 s ± 0.118 s [User: 7.968 s, System: 0.156 s]
Range (min … max): 8.007 s … 8.301 s 10 runs
Benchmark #2: ./git.new cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
Time (mean ± σ): 4.294 s ± 0.064 s [User: 4.167 s, System: 0.125 s]
Range (min … max): 4.227 s … 4.457 s 10 runs
Summary
'./git.new cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"' ran
1.89 ± 0.04 times faster than './git.old cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
The implementation is pretty simple: we just call packed_object_info()
instead of oid_object_info_extended() when we can. Most of the changes
are just plumbing the pack/offset pair through the callstack. There is
one subtlety: replace lookups are not handled by packed_object_info().
But since those are disabled for --batch-all-objects, and since we'll
only have pack info when that option is in effect, we don't have to
worry about that.
There are a few limitations to this optimization which we could address
with further work:
- I didn't bother recording when we found an object loose. Technically
this could save us doing a fruitless lookup in the pack index. But
opening and mmap-ing a loose object is so expensive in the first
place that this doesn't matter much. And if your repository is large
enough to care about per-object performance, most objects are going
to be packed anyway.
- This works only in --unordered mode. For the sorted mode, we'd have
to record the pack/offset pair as part of our oid-collection. That's
more code, plus at least 16 extra bytes of heap per object. It would
probably still be a net win in runtime, but we'd need to measure.
- For --batch, this still helps us with getting the object metadata,
but we still do a from-scratch lookup for the object contents. This
probably doesn't matter that much, because the lookup cost will be
much smaller relative to the cost of actually unpacking and printing
the objects.
For small objects, we could probably swap out read_object_file() for
using packed_object_info() with a "object_info.contentp" to get the
contents. But we'd still need to deal with streaming for larger
objects. A better path forward here is to teach the initial
oid_object_info_extended() / packed_object_info() calls to retrieve
the contents of smaller objects while they are already being
accessed. That would save the extra lookup entirely. But it's a
non-trivial feature to add to the object_info code, so I left it for
now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we originally added --batch-all-objects, it stuffed everything into
an oid_array(), and then iterated over that array with a callback to
write the actual output.
When we later added --unordered, that code path writes immediately as we
discover each object, but just calls the same batch_object_cb() as our
entry point to the writing code. That callback has a narrow interface;
it only receives the oid, but we know much more about each object in the
unordered write (which we'll make use of in the next patch). So let's
just call batch_object_write() directly. The callback wasn't saving us
much effort.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're enumerating all objects in the object database, it doesn't
make sense to respect refs/replace. The point of this option is to
enumerate all of the objects in the database at a low level. By
definition we'd already show the replacement object's contents (under
its real oid), and showing those contents under another oid is almost
certainly working against what the user is trying to do.
Note that you could make the same argument for something like:
git show-index <foo.idx |
awk '{print $2}' |
git cat-file --batch
but there we can't know in cat-file exactly what the user intended,
because we don't know the source of the input. They could be trying to
do low-level debugging, or they could be doing something more high-level
(e.g., imagine a porcelain built around cat-file for its object
accesses). So in those cases, we'll have to rely on the user specifying
"git --no-replace-objects" to tell us what to do.
One _could_ make an argument that "cat-file --batch" is sufficiently
low-level plumbing that it should not respect replace-objects at all
(and the caller should do any replacement if they want it). But we have
been doing so for some time. The history is a little tangled:
- looking back as far as v1.6.6, we would not respect replace refs for
--batch-check, but would for --batch (because the former used
sha1_object_info(), and the replace mechanism only affected actual
object reads)
- this discrepancy was made even weirder by 98e2092b50 (cat-file:
teach --batch to stream blob objects, 2013-07-10), where we always
output the header using the --batch-check code, and then printed the
object separately. This could lead to "cat-file --batch" dying (when
it notices the size or type changed for a non-blob object) or even
producing bogus output (in streaming mode, we didn't notice that we
wrote the wrong number of bytes).
- that persisted until 1f7117ef7a (sha1_file: perform object
replacement in sha1_object_info_extended(), 2013-12-11), which then
respected replace refs for both forms.
So it has worked reliably this way for over 7 years, and we should make
sure it continues to do so. That could also be an argument that
--batch-all-objects should not change behavior (which this patch is
doing), but I really consider the current behavior to be an unintended
bug. It's a side effect of how the code is implemented (feeding the oids
back into oid_object_info() rather than looking at what we found while
reading the loose and packed object storage).
The implementation is straight-forward: we just disable the global
read_replace_refs flag when we're in --batch-all-objects mode. It would
perhaps be a little cleaner to change the flag we pass to
oid_object_info_extended(), but that's not enough. We also read objects
via read_object_file() and stream_blob_to_fd(). The former could switch
to its _extended() form, but the streaming code has no mechanism for
disabling replace refs. Setting the global flag works, and as a bonus,
it's impossible to have any "oops, we're sometimes replacing the object
and sometimes not" bugs in the output (like the ones caused by
98e2092b50 above).
The tests here cover the regular-input and --batch-all-objects cases,
for both --batch-check and --batch. There is a test in t6050 that covers
the regular-input case with --batch already, but this new one goes much
further in actually verifying the output (plus covering --batch-check
explicitly). This is perhaps a little overkill and the tests would be
simpler just covering --batch-check, but I wanted to make sure we're
checking that --batch output is consistent between the header and the
content. The global-flag technique used here makes that easy to get
right, but this is future-proofing us against regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two "if (opt->all_objects)" blocks next
to each other, merge them into one to provide better
readability.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --batch code to print an object assumes we found out the type of
the object from calling oid_object_info_extended(). This is true for
the default format, but even in a custom format, we manually modify
the object_info struct to ask for the type.
This assumption was broken by 845de33a5b (cat-file: avoid noop calls
to sha1_object_info_extended, 2016-05-18). That commit skips the call
to oid_object_info_extended() entirely when --batch-all-objects is in
use, and the custom format does not include any placeholders that
require calling it.
Or when the custom format only include placeholders like %(objectname) or
%(rest), oid_object_info_extended() will not get the type of the object.
This results in an error when we try to confirm that the type didn't
change:
$ git cat-file --batch=batman --batch-all-objects
batman
fatal: object 000023961a changed type!?
and also has other subtle effects (e.g., we'd fail to stream a blob,
since we don't realize it's a blob in the first place).
We can fix this by flipping the order of the setup. The check for "do
we need to get the object info" must come _after_ we've decided
whether we need to look up the type.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When displaying cat-file usage, the fact that a <format> can
be specified is only visible when lookling at the --batch and
--batch-check options which are shown like this:
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
It seems more coherent and improves discovery to also show it
on the usage line.
In the documentation the DESCRIPTION tells us that "The output
format can be overridden using the optional <format> argument",
but we can't see the <format> argument in the SYNOPSIS above
the description which is confusing.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have the codebase wired up to pass any additional metadata
to filters, let's collect the additional metadata that we'd like to
pass.
The two main places we pass this metadata are checkouts and archives.
In these two situations, reading HEAD isn't a valid option, since HEAD
isn't updated for checkouts until after the working tree is written and
archives can accept an arbitrary tree. In other situations, HEAD will
usually reflect the refname of the branch in current use.
We pass a smaller amount of data in other cases, such as git cat-file,
where we can really only logically know about the blob.
This commit updates only the parts of the checkout code where we don't
use unpack_trees. That function and callers of it will be handled in a
future commit.
In the archive code, we leak a small amount of memory, since nothing we
pass in the archiver argument structure is freed.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a variety of situations where a filter process can make use of
some additional metadata. For example, some people find the ident
filter too limiting and would like to include the commit or the branch
in their smudged files. This information isn't available during
checkout as HEAD hasn't been updated at that point, and it wouldn't be
available in archives either.
Let's add a way to pass this metadata down to the filter. We pass the
blob we're operating on, the treeish (preferring the commit over the
tree if one exists), and the ref we're operating on. Note that we won't
pass this information in all cases, such as when renormalizing or when
we're performing diffs, since it doesn't make sense in those cases.
The data we currently get from the filter process looks like the
following:
command=smudge
pathname=git.c
0000
With this change, we'll get data more like this:
command=smudge
pathname=git.c
refname=refs/tags/v2.25.1
treeish=c522f061d551c9bb8684a7c3859b2ece4499b56b
blob=7be7ad34bd053884ec48923706e70c81719a8660
0000
There are a couple things to note about this approach. For operations
like checkout, treeish will always be a commit, since we cannot check
out individual trees, but for other operations, like archive, we can end
up operating on only a particular tree, so we'll provide only a tree as
the treeish. Similar comments apply for refname, since there are a
variety of cases in which we won't have a ref.
This commit wires up the code to print this information, but doesn't
pass any of it at this point. In a future commit, we'll have various
code paths pass the actual useful data down.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller sets the object_info.delta_base_sha1 to a non-NULL pointer,
we'll write the oid of the object's delta base to it. But we can
increase our type safety by switching this to a real object_id struct.
All of our callers are just pointing into the hash member of an
object_id anyway, so there's no inconvenience.
Note that we do still keep it as a pointer-to-struct, because the NULL
sentinel value tells us whether the caller is even interested in the
information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren
Junio C Hamano
Siddharth Asthana
Ævar Arnfjörð Bjarmason
Taylor Blau
John Cai
Jean-Noël Avila
Jeff King
ZheNing Hu
Christian Couder
Denton Liu
brian m. carlson
Nguyễn Thái Ngọc Duy