* maint:
Start preparing 1.5.6.4 release notes
git fetch-pack: do not complain about "no common commits" in an empty repo
rebase-i: keep old parents when preserving merges
t7600-merge: Use test_expect_failure to test option parsing
Fix buffer overflow in prepare_attr_stack
Fix buffer overflow in git diff
Fix buffer overflow in git-grep
git-cvsserver: fix call to nonexistant cleanupWorkDir()
Documentation/git-cherry-pick.txt et al.: Fix misleading -n description
Conflicts:
RelNotes
The manual page of git-cherry-pick and git-revert asserts that -n works
primarily on the working tree, while in fact the primary object it operates
on is the index, and the changes only "accidentally" propagate to the
working tree. This e.g. leads innocent #git IRC folks to believe that you
can use -n to prepare changes for git-add -i staging.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-add -i ranges expect number-number. But for the supremely lazy, typing in
that second number when selecting "from patch 7 to the end" is wasted effort.
So treat an empty second number in a range as "until the last item".
Signed-off-by: Ciaran McCreesh <ciaran.mccreesh@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes "submodule add" much more strict in the arguments it
takes, and is intended to address confusion as recently noted on the
git-list. With this change, the required syntax is:
$ git submodule add URL path
Specifically, this eliminates the form
$ git submodule add URL
which was confused by more than one person as
$ git submodule add path
With this patch, the URL locating the submodule's origin repository can be
either an absolute URL, or (if it begins with ./ or ../) can express the
submodule's repository location relative to the superproject's origin.
This patch also eliminates a third form of URL, which was relative to the
superproject's top-level directory (not its repository). Any URL that was
neither absolute nor matched ./*|../* was assumed to point to a
subdirectory of the superproject as the location of the submodule's origin
repository. This URL form was confusing and does not seem to correspond
to an important use-case. Specifically, no-one has identified the need to
clone from a repository already in the superproject's tree, but if this is
needed it is easily done using an absolute URL: $(pwd)/relative-path. So,
no functionality is lost with this patch. (t6008-rev-list-submodule.sh did
rely upon this relative URL, fixed by using $(pwd).)
Following this change, there are exactly four variants of
submodule-add, as both arguments have two flavors:
URL can be absolute, or can begin with ./|../ and thus names the
submodule's origin relative to the superproject's origin.
Note: With this patch, "submodule add" discerns an absolute URL as
matching /*|*:*: e.g., URL begins with /, or it contains a :. This works
for all valid URLs, an absolute path in POSIX, as well as an absolute path
on Windows).
path can either already exist as a valid git repo, or will be cloned from
the given URL. The first form here eases creation of a new submodule in
an existing superproject as the submodule can be added and tested in-tree
before pushing to the public repository. However, the more usual form is
the second, where the repo is cloned from the given URL.
This specifically addresses the issue of
$ git submodule add a/b/c
attempting to clone from a repository at "a/b/c" to create a new module
in "c". This also simplifies description of "relative URL" as there is now
exactly *one* form: a URL relative to the parent's origin repo.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The document says that a fetch with a configured remote stores what are
fetched in the remote tracking branches "Unlike the longhand form", but
there is no longhand form "fetch" demonstrated earlier.
This adds a missing demonstration of the longhand form, and a new
paragraph to explain why some people might want to fetch before pull.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invoking git-am or git-mailsplit without mbox or Maildir results in
reading an mbox from stdin. Mention this in the synopsis and usage
strings.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.6.3
git-am: Do not exit silently if committer is unset
t0004: fix timing bug
git-mailinfo: document the -n option
Fix backwards-incompatible handling of core.sharedRepository
* ph/parseopt-step-blame:
revisions: refactor handle_revision_opt into parse_revision_opt.
git-shortlog: migrate to parse-options partially.
git-blame: fix lapsus
git-blame: migrate to incremental parse-option [2/2]
git-blame: migrate to incremental parse-option [1/2]
revisions: split handle_revision_opt() from setup_revisions()
parse-opt: add PARSE_OPT_KEEP_ARGV0 parser option.
parse-opt: fake short strings for callers to believe in.
parse-opt: do not print errors on unknown options, return -2 intead.
parse-opt: create parse_options_step.
parse-opt: Export a non NORETURN usage dumper.
parse-opt: have parse_options_{start,end}.
git-blame --reverse
builtin-blame.c: allow more than 16 parents
builtin-blame.c: move prepare_final() into a separate function.
rev-list --children
revision traversal: --children option
The pretty format %an does not respect .mailmap, but gives the exact
author name recorded in the commit. Sometimes it is more desirable,
however, to look if the email has another name mapped to it in .mailmap.
This commit adds %aN (and %cN for the committer name) to do exactly that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/apply-root:
git-apply --directory: make --root more similar to GNU diff
apply --root: thinkofix.
Teach "git apply" to prepend a prefix with "--root=<root>"
"git-branch --merged" is a handy way to list all the branches that have
already been merged to the current branch, but it did not allow checking
against anything but the current branch. Having to switch branches only
to list the branches that are merged with another branch made the feature
practically useless.
This updates the option parser so that "git branch --merged next" is
accepted when you are on 'master' branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing release notes for 1.5.6.3
git-submodule - Fix bugs in adding an existing repo as a module
bash: offer only paths after '--'
Remove unnecessary pack-*.keep file after successful git-clone
make deleting a missing ref more quiet
Various *_HEAD pseudo refs were not documented in any central place.
Especially since we may be teaching rebase and am to record ORIG_HEAD,
it would be a good time to do so.
While at it, reword the explanation on r1..r2 notation to reduce
confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed as git-sh-setup is no longer in the path.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation suggests using "git stash apply" in the
--keep-index workflow even though doing so will lead to clutter
in the stash. And given that the changes are about to be
committed anyway "git stash pop" is more sensible.
Additionally the text preceeding the example claims that it
works for "two or more commits", but the example itself is
really tailored for just two. Expanding it just a little
makes it clear how the procedure generalizes to N commits.
Finally the example is annotated with some commentary to
explain things on a line-by-line basis.
Merge has always set ORIG_HEAD but never mentioned it, while we
recently added it to am and rebase. These facts should be reflected
in the documentation.
git-reset also sets ORIG_HEAD, but that fact is already mentioned in
the very first example so no changes were needed there.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'qq/maint' (early part):
git-svn.perl: workaround assertions in svn library 1.5.0
mailinfo: feed the correct line length to decode_transfer_encoding()
git-clone: remove leftover debugging fprintf().
Fix "config_error_nonbool" used with value instead of key
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
Applying a patch in the directory that is different from what the patch
records is done with --directory option in GNU diff. The --root option we
introduced previously does the same, and we can call it the same way to
give users more familiar feel.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* qq/maint:
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
Conflicts:
Documentation/gitattributes.txt
The document gives overall definition of states in DESCRIPTION, describes
various aspects of git operations that can be influenced in EFFECTS, and
finally gives examples in the EXAMPLE section. Archive creation however
was somehow documented after the EXAMPLE section, not insode EFFECTS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New users sometimes import a project and then immediately
try to use the imported repository as a central shared repository.
This provides pointers about setting up a bare repository for that
in the parts of the documentation dealing with CVS migration.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it explicit that the --pretty formats 'medium' and 'email' use the
author date (and ignore the committer date).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think that some of these uses of italics were meant to be
rendered in quotation marks, anyway.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Italicize those git subcommand names already in teletype we missed.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some manual pages use teletype font to set command names. We
change them to use italics, instead. This creates a visual
distinction between names of commands and command lines that
can be typed at the command line. It is also more consistent
with other man pages outside Git.
In this patch, the commands named are non-git commands like bash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name `gitk` is sometimes meant to be entered at the command
prompt, but most uses are just referring to the program with that
name (not the incantation to start it).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
