Currently stash shells out to reflog in order to delete refs. In an
effort to reduce how much we shell out to a subprocess, libify the
functionality that stash needs into reflog.c.
Add a reflog_delete function that is pretty much the logic in the while
loop in builtin/reflog.c cmd_reflog_delete(). This is a function that
builtin/reflog.c and builtin/stash.c can both call.
Also move functions needed by reflog_delete and export them.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C it isn't required to specify that all members of a struct are
zero'd out to 0, NULL or '\0', just providing a "{ 0 }" will
accomplish that.
Let's also change code that provided N zero'd fields to just
provide one, and change e.g. "{ NULL }" to "{ 0 }" for
consistency. I.e. even if the first member is a pointer let's use "0"
instead of "NULL". The point of using "0" consistently is to pick one,
and to not have the reader wonder why we're not using the same pattern
everywhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original code from 08cdfb1337 (pack-objects --keep-unreachable,
2007-09-16), we add each object to the packing list with type
`obj->type`, where `obj` comes from `lookup_unknown_object()`. Unless we
had already looked up and parsed the object, this will be `OBJ_NONE`.
That's fine, since oe_set_type() sets the type_valid bit to '0', and we
determine the real type later on.
So the only thing we need from the object lookup is access to the
`flags` field so that we can mark that we've added the object with
`OBJECT_ADDED` to avoid adding it again (we can just pass `OBJ_NONE`
directly instead of grabbing it from the object).
But add_object_entry() already rejects duplicates! This has been the
behavior since 7a979d99ba (Thin pack - create packfile with missing
delta base., 2006-02-19), but 08cdfb1337 didn't take advantage of it.
Moreover, to do the OBJECT_ADDED check, we have to do a hash lookup in
`obj_hash`.
So we can drop the lookup_unknown_object() call completely, *and* the
OBJECT_ADDED flag, too, since the spot we're touching here is the only
location that checks it.
In the end, we perform the same number of hash lookups, but with the
added bonus that we don't waste memory allocating an OBJ_NONE object (if
we were traversing, we'd need it eventually, but the whole point of this
code path is not to traverse).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases it's useful for efficiency reasons to get the type of an
object before deciding whether to parse it, but we still want an object
struct. E.g., in reachable.c, bitmaps give us the type, but we just want
to mark flags on each object. Likewise, we may loop over every object
and only parse tags in order to peel them; checking the type first lets
us avoid parsing the non-tags.
But our lookup_blob(), etc, functions make getting an object struct
annoying: we have to call the right function for every type. And we
cannot just use the generic lookup_object(), because it only returns an
already-seen object; it won't allocate a new object struct.
Let's provide a function that dispatches to the correct lookup_*
function based on a run-time type. In fact, reachable.c already has such
a helper, so we'll just make that public.
I did change the return type from "void *" to "struct object *". While
the former is a clever way to avoid casting inside the function, it's
less safe and less informative to people reading the function
declaration.
The next commit will add a new caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lookup_unknown_object() system is not often used and is somewhat
confusing. Let's try to explain it a bit more (which is especially
important as I'm adding a related but slightly different function in the
next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" learns to discover common ancestor with the receiving
end over protocol v2.
* jt/push-negotiation:
send-pack: support push negotiation
fetch: teach independent negotiation (no packfile)
fetch-pack: refactor command and capability write
fetch-pack: refactor add_haves()
fetch-pack: refactor process_acks()
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at least
one application wherein this is useful. Therefore, make it possible for
this negotiation step to be done independently. A subsequent commit will
use this for one such application - push negotiation.
This feature is for protocol v2 only. (An implementation for protocol v0
would require a separate implementation in the fetch, transport, and
transport helper code.)
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for the
client to say "done". In practice, the client will never say it; instead
it will cease requests once it is satisfied.
In the client, the main change lies in the transport and transport
helper code. fetch_refs_via_pack() performs everything needed - protocol
version and capability checks, and the negotiation itself.
There are 2 code paths that do not go through fetch_refs_via_pack() that
needed to be individually excluded: the bundle transport (excluded
through requiring smart_options, which the bundle transport doesn't
support) and transport helpers that do not support takeover. If or when
we support independent negotiation for protocol v0, we will need to
modify these 2 code paths to support it. But for now, report failure if
independent negotiation is requested in these cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to specify the repository to use. Rename the function to
repo_clear_commit_marks to document its new scope. No functional change
intended.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing a new commit-graph in every 'git maintenance run
--auto' process (when maintenance.commit-graph.enalbed is configured to
be true), only write when there are "enough" commits not in a
commit-graph file.
This count is controlled by the maintenance.commit-graph.auto config
option.
To compute the count, use a depth-first search starting at each ref, and
leaving markers using the SEEN flag. If this count reaches the limit,
then terminate early and start the task. Otherwise, this operation will
peel every ref and parse the commit it points to. If these are all in
the commit-graph, then this is typically a very fast operation. Users
with many refs might feel a slow-down, and hence could consider updating
their limit to be very small. A negative value will force the step to
run every time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "fetch.writeCommitGraph" configuration is set in a shallow
repository and a fetch moves the shallow boundary, we wrote out
broken commit-graph files that do not match the reality, which has
been corrected.
* tb/fix-persistent-shallow:
commit.c: don't persist substituted parents when unshallowing
Since 37b9dcabfc (shallow.c: use '{commit,rollback}_shallow_file',
2020-04-22), Git knows how to reset stat-validity checks for the
$GIT_DIR/shallow file, allowing it to change between a shallow and
non-shallow state in the same process (e.g., in the case of 'git fetch
--unshallow').
However, when $GIT_DIR/shallow changes, Git does not alter or remove any
grafts (nor substituted parents) in memory.
This comes up in a "git fetch --unshallow" with fetch.writeCommitGraph
set to true. Ordinarily in a shallow repository (and before 37b9dcabfc,
even in this case), commit_graph_compatible() would return false,
indicating that the repository should not be used to write a
commit-graphs (since commit-graph files cannot represent a shallow
history). But since 37b9dcabfc, in an --unshallow operation that check
succeeds.
Thus even though the repository isn't shallow any longer (that is, we
have all of the objects), the in-core representation of those objects
still has munged parents at the shallow boundaries. When the
commit-graph write proceeds, we use the incorrect parentage, producing
wrong results.
There are two ways for a user to work around this: either (1) set
'fetch.writeCommitGraph' to 'false', or (2) drop the commit-graph after
unshallowing.
One way to fix this would be to reset the parsed object pool entirely
(flushing the cache and thus preventing subsequent reads from modifying
their parents) after unshallowing. That would produce a problem when
callers have a now-stale reference to the old pool, and so this patch
implements a different approach. Instead, attach a new bit to the pool,
'substituted_parent', which indicates if the repository *ever* stored a
commit which had its parents modified (i.e., the shallow boundary
prior to unshallowing).
This bit needs to be sticky because all reads subsequent to modifying a
commit's parents are unreliable when unshallowing. Modify the check in
'commit_graph_compatible' to take this bit into account, and correctly
avoid generating commit-graphs in this case, thus solving the bug.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to push changes over "dumb" HTTP had a bad interaction
with the commit reachability code due to incorrect allocation of
object flag bits, which has been corrected.
* bc/http-push-flagsfix:
http-push: ensure unforced pushes fail when data would be lost
The bit fields in struct object have an unfortunate layout. Here's what
pahole reports on x86_64 GNU/Linux:
struct object {
unsigned int parsed:1; /* 0: 0 4 */
unsigned int type:3; /* 0: 1 4 */
/* XXX 28 bits hole, try to pack */
/* Force alignment to the next boundary: */
unsigned int :0;
unsigned int flags:29; /* 4: 0 4 */
/* XXX 3 bits hole, try to pack */
struct object_id oid; /* 8 32 */
/* size: 40, cachelines: 1, members: 4 */
/* sum members: 32 */
/* sum bitfield members: 33 bits, bit holes: 2, sum bit holes: 31 bits */
/* last cacheline: 40 bytes */
};
Notice the 1+3+29=33 bits in bit fields and 28+3=31 bits in holes.
There are holes inside the flags bit field as well -- while some object
flags are used for more than one purpose, 22, 23 and 24 are still free.
Use 23 and 24 instead of 27 and 28 for TOPO_WALK_EXPLORED and
TOPO_WALK_INDEGREE. This allows us to reduce FLAG_BITS by one so that
all bitfields combined fit into a single 32-bit slot:
struct object {
unsigned int parsed:1; /* 0: 0 4 */
unsigned int type:3; /* 0: 1 4 */
unsigned int flags:28; /* 0: 4 4 */
struct object_id oid; /* 4 32 */
/* size: 36, cachelines: 1, members: 4 */
/* last cacheline: 36 bytes */
};
With this tight packing the size of struct object is reduced by 10%.
Other architectures probably benefit as well.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we push using the DAV-based protocol, the client is the one that
performs the ref updates and therefore makes the checks to see whether
an unforced push should be allowed. We make this check by determining
if either (a) we lack the object file for the old value of the ref or
(b) the new value of the ref is not newer than the old value, and in
either case, reject the push.
However, the ref_newer function, which performs this latter check, has
an odd behavior due to the reuse of certain object flags. Specifically,
it will incorrectly return false in its first invocation and then
correctly return true on a subsequent invocation. This occurs because
the object flags used by http-push.c are the same as those used by
commit-reach.c, which implements ref_newer, and one piece of code
misinterprets the flags set by the other.
Note that this does not occur in all cases. For example, if the example
used in the tests is changed to use one repository instead of two and
rewind the head to add a commit, the test passes and we correctly reject
the push. However, the example provided does trigger this behavior, and
the code has been broken in this way since at least Git 2.0.0.
To solve this problem, let's move the two sets of object flags so that
they don't overlap, since we're clearly using them at the same time.
The new set should not conflict with other usage because other users are
either builtin code (which is not compiled into git http-push) or
upload-pack (which we similarly do not use here).
Reported-by: Michael Ward <mward@smartsoftwareinc.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14ba97f8 (alloc: allow arbitrary repositories for alloc functions,
2018-05-15) introduced parsed_object_pool->commit_count to keep count of
commits per repository and was used to assign commit->index.
However, commit-slab code requires commit->index values to be unique
and a global count would be correct, rather than a per-repo count.
Let's introduce a static counter variable, `parsed_commits_count` to
keep track of parsed commits so far.
As commit_count has no use anymore, let's also drop it from the struct.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default file history simplification of "git log -- <path>" or
"git rev-list -- <path>" focuses on providing the smallest set of
commits that first contributed a change. The revision walk greatly
restricts the set of walked commits by visiting only the first
TREESAME parent of a merge commit, when one exists. This means
that portions of the commit-graph are not walked, which can be a
performance benefit, but can also "hide" commits that added changes
but were ignored by a merge resolution.
The --full-history option modifies this by walking all commits and
reporting a merge commit as "interesting" if it has _any_ parent
that is not TREESAME. This tends to be an over-representation of
important commits, especially in an environment where most merge
commits are created by pull request completion.
Suppose we have a commit A and we create a commit B on top that
changes our file. When we merge the pull request, we create a merge
commit M. If no one else changed the file in the first-parent
history between M and A, then M will not be TREESAME to its first
parent, but will be TREESAME to B. Thus, the simplified history
will be "B". However, M will appear in the --full-history mode.
However, suppose that a number of topics T1, T2, ..., Tn were
created based on commits C1, C2, ..., Cn between A and M as
follows:
A----C1----C2--- ... ---Cn----M------P1---P2--- ... ---Pn
\ \ \ \ / / / /
\ \__.. \ \/ ..__T1 / Tn
\ \__.. /\ ..__T2 /
\_____________________B \____________________/
If the commits T1, T2, ... Tn did not change the file, then all of
P1 through Pn will be TREESAME to their first parent, but not
TREESAME to their second. This means that all of those merge commits
appear in the --full-history view, with edges that immediately
collapse into the lower history without introducing interesting
single-parent commits.
The --simplify-merges option was introduced to remove these extra
merge commits. By noticing that the rewritten parents are reachable
from their first parents, those edges can be simplified away. Finally,
the commits now look like single-parent commits that are TREESAME to
their "only" parent. Thus, they are removed and this issue does not
cause issues anymore. However, this also ends up removing the commit
M from the history view! Even worse, the --simplify-merges option
requires walking the entire history before returning a single result.
Many Git users are using Git alongside a Git service that provides
code storage alongside a code review tool commonly called "Pull
Requests" or "Merge Requests" against a target branch. When these
requests are accepted and merged, they typically create a merge
commit whose first parent is the previous branch tip and the second
parent is the tip of the topic branch used for the request. This
presents a valuable order to the parents, but also makes that merge
commit slightly special. Users may want to see not only which
commits changed a file, but which pull requests merged those commits
into their branch. In the previous example, this would mean the
users want to see the merge commit "M" in addition to the single-
parent commit "C".
Users are even more likely to want these merge commits when they
use pull requests to merge into a feature branch before merging that
feature branch into their trunk.
In some sense, users are asking for the "first" merge commit to
bring in the change to their branch. As long as the parent order is
consistent, this can be handled with the following rule:
Include a merge commit if it is not TREESAME to its first
parent, but is TREESAME to a later parent.
These merges look like the merge commits that would result from
running "git pull <topic>" on a main branch. Thus, the option to
show these commits is called "--show-pulls". This has the added
benefit of showing the commits created by closing a pull request or
merge request on any of the Git hosting and code review platforms.
To test these options, extend the standard test example to include
a merge commit that is not TREESAME to its first parent. It is
surprising that that option was not already in the example, as it
is instructive.
In particular, this extension demonstrates a common issue with file
history simplification. When a user resolves a merge conflict using
"-Xours" or otherwise ignoring one side of the conflict, they create
a TREESAME edge that probably should not be TREESAME. This leads
users to become frustrated and complain that "my change disappeared!"
In my experience, showing them history with --full-history and
--simplify-merges quickly reveals the problematic merge. As mentioned,
this option is expensive to compute. The --show-pulls option
_might_ show the merge commit (usually titled "resolving conflicts")
more quickly. Of course, this depends on the user having the correct
parent order, which is backwards when using "git pull master" from a
topic branch.
There are some special considerations when combining the --show-pulls
option with --simplify-merges. This requires adding a new PULL_MERGE
object flag to store the information from the initial TREESAME
comparisons. This helps avoid dropping those commits in later filters.
This is covered by a test, including how the parents can be simplified.
Since "struct object" has already ruined its 32-bit alignment by using
33 bits across parsed, type, and flags member, let's not make it worse.
PULL_MERGE is used in revision.c with the same value (1u<<15) as
REACHABLE in commit-graph.c. The REACHABLE flag is only used when
writing a commit-graph file, and a revision walk using --show-pulls
does not happen in the same process. Care must be taken in the future
to ensure this remains the case.
Update Documentation/rev-list-options.txt with significant details
around this option. This requires updating the example in the
History Simplification section to demonstrate some of the problems
with TREESAME second parents.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we do a bitmap-aware revision traversal, we create an object_list
for each of the "haves" and "wants" tips. After creating the result
bitmaps these are no longer needed or used, but we never free the list
memory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of create_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables. It also
matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of lookup_unknown_object() that aren't just
passing us the "hash" member of a "struct object_id". Let's take the
whole struct, which gets us closer to removing all raw sha1 variables.
It also matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current --topo-order algorithm requires walking all
reachable commits up front, topo-sorting them, all before
outputting the first value. This patch introduces a new
algorithm which uses stored generation numbers to
incrementally walk in topo-order, outputting commits as
we go. This can dramatically reduce the computation time
to write a fixed number of commits, such as when limiting
with "-n <N>" or filling the first page of a pager.
When running a command like 'git rev-list --topo-order HEAD',
Git performed the following steps:
1. Run limit_list(), which parses all reachable commits,
adds them to a linked list, and distributes UNINTERESTING
flags. If all unprocessed commits are UNINTERESTING, then
it may terminate without walking all reachable commits.
This does not occur if we do not specify UNINTERESTING
commits.
2. Run sort_in_topological_order(), which is an implementation
of Kahn's algorithm. It first iterates through the entire
set of important commits and computes the in-degree of each
(plus one, as we use 'zero' as a special value here). Then,
we walk the commits in priority order, adding them to the
priority queue if and only if their in-degree is one. As
we remove commits from this priority queue, we decrement the
in-degree of their parents.
3. While we are peeling commits for output, get_revision_1()
uses pop_commit on the full list of commits computed by
sort_in_topological_order().
In the new algorithm, these three steps correspond to three
different commit walks. We run these walks simultaneously,
and advance each only as far as necessary to satisfy the
requirements of the 'higher order' walk. We know when we can
pause each walk by using generation numbers from the commit-
graph feature.
Recall that the generation number of a commit satisfies:
* If the commit has at least one parent, then the generation
number is one more than the maximum generation number among
its parents.
* If the commit has no parent, then the generation number is one.
There are two special generation numbers:
* GENERATION_NUMBER_INFINITY: this value is 0xffffffff and
indicates that the commit is not stored in the commit-graph and
the generation number was not previously calculated.
* GENERATION_NUMBER_ZERO: this value (0) is a special indicator
to say that the commit-graph was generated by a version of Git
that does not compute generation numbers (such as v2.18.0).
Since we use generation_numbers_enabled() before using the new
algorithm, we do not need to worry about GENERATION_NUMBER_ZERO.
However, the existence of GENERATION_NUMBER_INFINITY implies the
following weaker statement than the usual we expect from
generation numbers:
If A and B are commits with generation numbers gen(A) and
gen(B) and gen(A) < gen(B), then A cannot reach B.
Thus, we will walk in each of our stages until the "maximum
unexpanded generation number" is strictly lower than the
generation number of a commit we are about to use.
The walks are as follows:
1. EXPLORE: using the explore_queue priority queue (ordered by
maximizing the generation number), parse each reachable
commit until all commits in the queue have generation
number strictly lower than needed. During this walk, update
the UNINTERESTING flags as necessary.
2. INDEGREE: using the indegree_queue priority queue (ordered
by maximizing the generation number), add one to the in-
degree of each parent for each commit that is walked. Since
we walk in order of decreasing generation number, we know
that discovering an in-degree value of 0 means the value for
that commit was not initialized, so should be initialized to
two. (Recall that in-degree value "1" is what we use to say a
commit is ready for output.) As we iterate the parents of a
commit during this walk, ensure the EXPLORE walk has walked
beyond their generation numbers.
3. TOPO: using the topo_queue priority queue (ordered based on
the sort_order given, which could be commit-date, author-
date, or typical topo-order which treats the queue as a LIFO
stack), remove a commit from the queue and decrement the
in-degree of each parent. If a parent has an in-degree of
one, then we add it to the topo_queue. Before we decrement
the in-degree, however, ensure the INDEGREE walk has walked
beyond that generation number.
The implementations of these walks are in the following methods:
* explore_walk_step and explore_to_depth
* indegree_walk_step and compute_indegrees_to_depth
* next_topo_commit and expand_topo_walk
These methods have some patterns that may seem strange at first,
but they are probably carry-overs from their equivalents in
limit_list and sort_in_topological_order.
One thing that is missing from this implementation is a proper
way to stop walking when the entire queue is UNINTERESTING, so
this implementation is not enabled by comparisions, such as in
'git rev-list --topo-order A..B'. This can be updated in the
future.
In my local testing, I used the following Git commands on the
Linux repository in three modes: HEAD~1 with no commit-graph,
HEAD~1 with a commit-graph, and HEAD with a commit-graph. This
allows comparing the benefits we get from parsing commits from
the commit-graph and then again the benefits we get by
restricting the set of commits we walk.
Test: git rev-list --topo-order -100 HEAD
HEAD~1, no commit-graph: 6.80 s
HEAD~1, w/ commit-graph: 0.77 s
HEAD, w/ commit-graph: 0.02 s
Test: git rev-list --topo-order -100 HEAD -- tools
HEAD~1, no commit-graph: 9.63 s
HEAD~1, w/ commit-graph: 6.06 s
HEAD, w/ commit-graph: 0.06 s
This speedup is due to a few things. First, the new generation-
number-enabled algorithm walks commits on order of the number of
results output (subject to some branching structure expectations).
Since we limit to 100 results, we are running a query similar to
filling a single page of results. Second, when specifying a path,
we must parse the root tree object for each commit we walk. The
previous benefits from the commit-graph are entirely from reading
the commit-graph instead of parsing commits. Since we need to
parse trees for the same number of commits as before, we slow
down significantly from the non-path-based query.
For the test above, I specifically selected a path that is changed
frequently, including by merge commits. A less-frequently-changed
path (such as 'README') has similar end-to-end time since we need
to walk the same number of commits (before determining we do not
have 100 hits). However, get the benefit that the output is
presented to the user as it is discovered, much the same as a
normal 'git log' command (no '--topo-order'). This is an improved
user experience, even if the command has the same runtime.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code restructuring and a small fix to transport protocol v2 during
fetching.
* jt/fetch-pack-negotiator:
fetch-pack: introduce negotiator API
fetch-pack: move common check and marking together
fetch-pack: make negotiation-related vars local
fetch-pack: use ref adv. to prune "have" sent
fetch-pack: directly end negotiation if ACK ready
fetch-pack: clear marks before re-marking
fetch-pack: split up everything_local()
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
There are several commit walks in the codebase. Group them together into
a new commit-reach.c file and corresponding header. After we group these
walks into one place, we can reduce duplicate logic by calling
equivalent methods.
The can_all_from_reach_with_flags method is used in a stateful way by
upload-pack.c. The parameters are very flexible, so we will be able to
use its commit walking logic for many other callers.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several commit walks in the codebase. Group them together into
a new commit-reach.c file and corresponding header. After we group these
walks into one place, we can reduce duplicate logic by calling
equivalent methods.
The method declarations in commit.h are not touched by this commit and
will be moved in a following commit. Many consumers need to point to
commit-reach.h and that would bloat this commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
A filter line in a request to upload-pack filters out objects regardless
of whether they are directly referenced by a "want" line or not. This
means that cloning with "--filter=blob:none" (or another filter that
excludes blobs) from a repository with at least one ref pointing to a
blob (for example, the Git repository itself) results in output like the
following:
error: missing object referenced by 'refs/tags/junio-gpg-pub'
and if that particular blob is not referenced by a fetched tree, the
resulting clone fails fsck because there is no object from the remote to
vouch that the missing object is a promisor object.
Update both the protocol and the upload-pack implementation to include
all explicitly specified "want" objects in the packfile regardless of
the filter specification.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-alloc:
alloc: allow arbitrary repositories for alloc functions
object: allow create_object to handle arbitrary repositories
object: allow grow_object_hash to handle arbitrary repositories
alloc: add repository argument to alloc_commit_index
alloc: add repository argument to alloc_report
alloc: add repository argument to alloc_object_node
alloc: add repository argument to alloc_tag_node
alloc: add repository argument to alloc_commit_node
alloc: add repository argument to alloc_tree_node
alloc: add repository argument to alloc_blob_node
object: add repository argument to grow_object_hash
object: add repository argument to create_object
repository: introduce parsed objects field
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
Introduce the new files fetch-negotiator.{h,c}, which contains an API
behind which the details of negotiation are abstracted. Currently, only
one algorithm is available: the existing one.
This patch is written to be easily reviewed: static functions are
moved verbatim from fetch-pack.c to negotiator/default.c, and it can be
seen that the lines replaced by negotiator->X() calls are present in the
X() functions respectively.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" needs to allocate tons of "struct object_entry"
while doing its work, and shrinking its size helps the performance
quite a bit.
* nd/pack-objects-pack-struct:
ci: exercise the whole test suite with uncommon code in pack-objects
pack-objects: reorder members to shrink struct object_entry
pack-objects: shrink delta_size field in struct object_entry
pack-objects: shrink size field in struct object_entry
pack-objects: clarify the use of object_entry::size
pack-objects: don't check size when the object is bad
pack-objects: shrink z_delta_size field in struct object_entry
pack-objects: refer to delta objects by index instead of pointer
pack-objects: move in_pack out of struct object_entry
pack-objects: move in_pack_pos out of struct object_entry
pack-objects: use bitfield for object_entry::depth
pack-objects: use bitfield for object_entry::dfs_state
pack-objects: turn type and in_pack_type to bitfields
pack-objects: a bit of document about struct object_entry
read-cache.c: make $GIT_TEST_SPLIT_INDEX boolean
This is another candidate for commit-slab. Keep Junio's observation in
code so we can search it later on when somebody wants to improve the
code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the global variable 'commit_graft_prepared' into the object
pool and convert the function prepare_commit_graft to work
an arbitrary repositories.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
John Cai
Ævar Arnfjörð Bjarmason
Taylor Blau
Jeff King
Junio C Hamano
Jonathan Tan
René Scharfe
Derrick Stolee
brian m. carlson
Abhishek Kumar
Denton Liu
Derrick Stolee
Elijah Newren
Stefan Beller
Nguyễn Thái Ngọc Duy