Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests-more:
merge: add missing strbuf_release()
ls-files: add missing string_list_clear()
ls-files: fix a trivial dir_clear() leak
tests: fix test-oid-array leak, test in SANITIZE=leak
tests: fix a memory leak in test-oidtree.c
tests: fix a memory leak in test-parse-options.c
tests: fix a memory leak in test-prio-queue.c
Mostly preliminary clean-up in the hook API.
* ab/config-based-hooks-1:
hook-list.h: add a generated list of hooks, like config-list.h
hook.c users: use "hook_exists()" instead of "find_hook()"
hook.c: add a hook_exists() wrapper and use it in bugreport.c
hook.[ch]: move find_hook() from run-command.c to hook.c
Makefile: remove an out-of-date comment
Makefile: don't perform "mv $@+ $@" dance for $(GENERATED_H)
Makefile: stop hardcoding {command,config}-list.h
Makefile: mark "check" target as .PHONY
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
We strbuf_reset() this "struct strbuf" in a loop earlier, but never
freed it. Plugs a memory leak that's been here ever since this code
got introduced in 1c7b76be7d6 (Build in merge, 2008-07-07).
This takes us from 68 failed tests in "t7600-merge.sh" to 59 under
SANITIZE=leak, and makes "t7604-merge-custom-message.sh" pass!
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change several commands to remove ignored files by default when they are
in the way. Since some commands (checkout, merge) take a
--no-overwrite-ignore option to allow the user to configure this, and it
may make sense to add that option to more commands (and in the case of
merge, actually plumb that configuration option through to more of the
backends than just the fast-forwarding special case), add little
comments about where such flags would be used.
Incidentally, this fixes a test failure in t7112.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new hook_exists() function instead of find_hook() where the
latter was called in boolean contexts. This make subsequent changes in
a series where we further refactor the hook API clearer, as we won't
conflate wanting to get the path of the hook with checking for its
existence.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the find_hook() function from run-command.c to a new hook.c
library. This change establishes a stub library that's pretty
pointless right now, but will see much wider use with Emily Shaffer's
upcoming "configuration-based hooks" series.
Eventually all the hook related code will live in hook.[ch]. Let's
start that process by moving the simple find_hook() function over
as-is.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
Code clean up to migrate callers from older advice_config[] based
API to newer advice_if_enabled() and advice_enabled() API.
* ab/retire-advice-config:
advice: move advice.graftFileDeprecated squashing to commit.[ch]
advice: remove use of global advice_add_embedded_repo
advice: remove read uses of most global `advice_` variables
advice: add enum variants for missing advice variables
Allow 'git merge' to operate without expanding a sparse index, at least
not immediately. The index still will be expanded in a few cases:
1. If the merge strategy is 'recursive', then we enable
command_requires_full_index at the start of the merge_recursive()
method. We expect sparse-index users to also have the 'ort' strategy
enabled.
2. With the 'ort' strategy, if the merge results in a conflicted file,
then we expand the index before updating the working tree. The loop
that iterates over the worktree replaces index entries and tracks
'origintal_cache_nr' which can become completely wrong if the index
expands in the middle of the operation. This safety valve is
important before that loop starts. A later change will focus this
to only expand if we indeed have a conflict outside of the
sparse-checkout cone.
3. Other merge strategies are executed as a 'git merge-X' subcommand,
and those strategies are currently protected with the
'command_requires_full_index' guard.
Some test updates are required, including a mistaken 'git checkout -b'
that did not specify the base branch, causing merges to be fast-forward
merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before spawning the auto maintenance, we need to make sure that we
release all open file handles to all the `.pack` files (and MIDX files
and commit-graph files and...) so that the maintenance process has the
freedom to delete those files.
So far, we did this manually every time before calling
`run_auto_maintenance()`. With the new `close_object_store` flag, we can
do that implicitly in that function, which is more robust because future
callers won't be able to forget to close the object store.
Note: this changes behavior slightly, as we previously _always_ closed
the object store, but now we only close the object store when actually
running the auto maintenance. In practice, this should not matter (if
anything, it might speed up operations where auto maintenance is
disabled).
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `ort` instead of `recursive` as the default merge strategy.
* en/ort-becomes-the-default:
Update docs for change of default merge backend
Change default merge backend from recursive to ort
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d540b70c85 (merge: cleanup messages like commit, 2019-04-17) adds
a way to change part of the helper text using a single call to
strbuf_add_commented_addf but with two formats with varying number
of parameters.
this trigger a warning in old versions of Xcode (ex 8.0), so use
instead two independent calls with a matching number of parameters
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few reasons to switch the default:
* Correctness
* Extensibility
* Performance
I'll provide some summaries about each.
=== Correctness ===
The original impetus for a new merge backend was to fix issues that were
difficult to fix within recursive's design. The success with this goal
is perhaps most easily demonstrated by running the following:
$ git grep -2 KNOWN_FAILURE t/ | grep -A 4 GIT_TEST_MERGE_ALGORITHM
$ git grep test_expect_merge_algorithm.failure.success t/
$ git grep test_expect_merge_algorithm.success.failure t/
In order, these greps show:
* Seven sets of submodule tests (10 total tests) that fail with
recursive but succeed with ort
* 22 other tests that fail with recursive, but succeed with ort
* 0 tests that pass with recursive, but fail with ort
=== Extensibility ===
Being able to perform merges without touching the working tree or index
makes it possible to create new features that were difficult with the
old backend:
* Merging, cherry-picking, rebasing, reverting in bare repositories...
or just on branches that aren't checked out.
* `git diff AUTO_MERGE` -- ability to see what changes the user has
made to resolve conflicts so far (see commit 5291828df8 ("merge-ort:
write $GIT_DIR/AUTO_MERGE whenever we hit a conflict", 2021-03-20)
* A --remerge-diff option for log/show, used to show diffs for merges
that display the difference between what an automatic merge would
have created and what was recorded in the merge. (This option will
often result in an empty diff because many merges are clean, but for
the non-clean ones it will show how conflicts were fixed including
the removal of conflict markers, and also show additional changes
made outside of conflict regions to e.g. fix semantic conflicts.)
* A --remerge-diff-only option for log/show, similar to --remerge-diff
but also showing how cherry-picks or reverts differed from what an
automatic cherry-pick or revert would provide.
The last three have been implemented already (though only one has been
submitted upstream so far; the others were waiting for performance work
to complete), and I still plan to implement the first one.
=== Performance ===
I'll quote from the summary of my final optimization for merge-ort
(while fixing the testcase name from 'no-renames' to 'few-renames'):
Timings
Infinite
merge- merge- Parallelism
recursive recursive of rename merge-ort
v2.30.0 current detection current
---------- --------- ----------- ---------
few-renames: 18.912 s 18.030 s 11.699 s 198.3 ms
mega-renames: 5964.031 s 361.281 s 203.886 s 661.8 ms
just-one-mega: 149.583 s 11.009 s 7.553 s 264.6 ms
Speedup factors
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
few-renames: 1 1.05 1.6 95
mega-renames: 1 16.5 29 9012
just-one-mega: 1 13.6 20 565
And, for partial clone users:
Factor reduction in number of objects needed
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
mega-renames: 1 1 1 181.3
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two locations in the code that referred to 'merge-recursive'
but which were also applicable to 'merge-ort'. Update them to more
general wording.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
merge_name() calls dwim_ref(), which allocates a new string into
found_ref. Therefore add a free() to avoid leaking found_ref.
LSAN output from t0021:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa8beb8 in xstrdup wrapper.c:29:14
#2 0x954054 in expand_ref refs.c:671:12
#3 0x953cb6 in repo_dwim_ref refs.c:644:22
#4 0x5d3759 in dwim_ref refs.h:162:9
#5 0x5d3759 in merge_name builtin/merge.c:517:6
#6 0x5d3759 in collect_parents builtin/merge.c:1214:5
#7 0x5cf60d in cmd_merge builtin/merge.c:1458:16
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6bdbfd in main common-main.c:52:11
#13 0x7f0430502349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 16 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', once it is determined that
we have to create a merge commit, calls 'create_autostash' if
'--autostash' is given.
As explained in a03b55530a, and made more abvious by the tests added in
that commit, the autostash is then applied if the merge succeeds, either
directly or by committing (after conflict resolution or if '--no-commit'
was given), or if the merge is aborted with 'git merge --abort'. In some
other cases, like the user calling 'git reset --merge' or 'git merge
--quit', the autostash is not applied, but saved in the stash list.
However, there exists a scenario that creates an autostash but does not
apply nor save it to the stash list: if the chosen merge strategy
completely fails to handle the merge, i.e. 'try_merge_strategy' returns
2.
Apply the autostash in that case also. An easy way to test that is to
try to merge more than two commits but explicitely ask for the 'recursive'
merge strategy.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', in the fast-forward case,
calls 'create_autostash' before calling 'checkout_fast_forward' if
'--autostash' is given.
However, if 'checkout_fast_forward' fails, the autostash is not applied
to the working tree, nor saved in the stash list, since the code simply
calls 'goto done'.
Be more helpful to the user by applying the autostash in that case.
An easy way to test a failing fast-forward is when we are merging a
branch that has a tracked file that conflicts with an untracked file in
the working tree.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable 'best_strategy' holds the name of the merge strategy that
resulted in fewer conflicts, if several strategies were tried. When
that's the case but the best strategy was not the first one tried, we
inform the user which strategy was the "best" one before recreating the
merge and leaving the conflicted files in the tree.
This informational message is missing the word "strategy", so it shows
something like:
Using the recursive to prepare resolving by hand.
Fix that.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning about pulling without specifying how to reconcile divergent
branches says that after setting pull.rebase to true, --ff-only can
still be passed on the command line to require a fast-forward. Make that
actually work.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[en: updated tests; note 3 fixes and 1 new failure]
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These strings have not been modified in any translation, nor should they
be.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite of git-merge from shell to C in 1c7b76be7d (Build in merge,
2008-07-07) accidentally transformed the message:
Already up-to-date. (nothing to squash)
to:
(nothing to squash)Already up-to-date.
due to reversed printf() arguments. This problem has gone unnoticed
despite being touched over the years by 7f87aff22c (Teach/Fix pull/fetch
-q/-v options, 2008-11-15) and bacec47845 (i18n: git-merge basic
messages, 2011-02-22), and tangentially by bef4830e88 (i18n: merge: mark
messages for translation, 2016-06-17) and 7560f547e6 (treewide: correct
several "up-to-date" to "up to date", 2017-08-23).
Fix it by restoring the message to its intended order. While at it, help
translators out by avoiding "sentence Lego".
[es: rewrote commit message]
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the various "Already up to date" messages resulting from merge
attempts share identical phrasing, they use a mix of punctuation ranging
from "." to "!" and even "Yeeah!", which leads to extra work for
translators. Ease the job of translators by settling upon "." as
punctuation for all such messages.
While at it, take advantage of printf_ln() to further ease the
translation task so translators need not worry about line termination,
and fix a case of missing line termination in the (unused)
merge_ort_nonrecursive() function.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
This function sets all the relevant flags to disabled state, so that
no code that checks only one of them get it wrong.
Then we call this new function everywhere where diff merges output
suppression is needed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425b (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a53 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
The run_auto_gc() method is used in several places to trigger a check
for repo maintenance after some Git commands, such as 'git commit' or
'git fetch'.
To allow for extra customization of this maintenance activity, replace
the 'git gc --auto [--quiet]' call with one to 'git maintenance run
--auto [--quiet]'. As we extend the maintenance builtin with other
steps, users will be able to select different maintenance activities.
Rename run_auto_gc() to run_auto_maintenance() to be clearer what is
happening on this call, and to expose all callers in the current diff.
Rewrite the method to use a struct child_process to simplify the calls
slightly.
Since 'git fetch' already allows disabling the 'git gc --auto'
subprocess, add an equivalent option with a different name to be more
descriptive of the new behavior: '--[no-]maintenance'. Update the
documentation to include these options at the same time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check for existence and delete CHERRY_PICK_HEAD through ref functions.
This will help cherry-pick work with alternate ref storage backends.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a merge with a single strategy, the result of evaluate_result() is
effectively not used and therefore is not needed, so avoid altogether.
On Windows, this optimization can halve the time required to perform a
recursive merge of a single commit with the LLVM repo.
Signed-off-by: Andrew Ng <andrew.ng@sony.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "am", "commit", "merge" and "rebase", when they are run with
the "--quiet" option, to pass "--quiet" down to "gc --auto".
* jc/auto-gc-quiet:
auto-gc: pass --quiet down from am, commit, merge and rebase
auto-gc: extract a reusable helper from "git fetch"
These commands take the --quiet option for their own operation, but
they forget to pass the option down when they invoke "git gc --auto"
internally.
Teach them to do so using the run_auto_gc() helper we added in the
previous step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
