The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous changes did the necessary improvements to unpack-trees.c and
diff-lib.c in order to modify a sparse index based on its comparision
with a tree. The only remaining work is to remove some
ensure_full_index() calls and add tests that verify that the index is
not expanded in our interesting cases. Include 'switch' and 'restore' in
these tests, as they share a base implementation with 'checkout'.
Here are the relevant performance results from
p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.18: git checkout -f - (full-v3) 0.49(0.43+0.03) 0.47(0.39+0.05) -4.1%
2000.19: git checkout -f - (full-v4) 0.45(0.37+0.06) 0.42(0.37+0.05) -6.7%
2000.20: git checkout -f - (sparse-v3) 0.76(0.71+0.07) 0.04(0.03+0.04) -94.7%
2000.21: git checkout -f - (sparse-v4) 0.75(0.72+0.04) 0.05(0.06+0.04) -93.3%
It is important to compare the full index case to the sparse index case,
as the previous results for the sparse index were inflated by the index
expansion. For index v4, this is an 88% improvement.
On an internal repository with over two million paths at HEAD and a
sparse-checkout definition containing ~60,000 of those paths, 'git
checkout' went from 3.5s to 297ms with this change. The theoretical
optimum where only those ~60,000 paths exist was 275ms, so the extra
sparse directory entries contribute a 22ms overhead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
Plug various leans reported by LSAN.
* ah/plugleaks:
builtin/rm: avoid leaking pathspec and seen
builtin/rebase: release git_format_patch_opt too
builtin/for-each-ref: free filter and UNLEAK sorting.
mailinfo: also free strbuf lists when clearing mailinfo
builtin/checkout: clear pending objects after diffing
builtin/check-ignore: clear_pathspec before returning
builtin/bugreport: don't leak prefixed filename
branch: FREE_AND_NULL instead of NULL'ing real_ref
bloom: clear each bloom_key after use
ls-files: free max_prefix when done
wt-status: fix multiple small leaks
revision: free remainder of old commit list in limit_list
Pathspec-limited checkouts (like `git checkout *.txt`) are performed by
a code path that doesn't yet support parallel checkout because it calls
checkout_entry() directly, instead of unpack_trees(). Let's add parallel
checkout support for this code path too.
The transient cache entries allocated in checkout_merged() are now
allocated in a mem_pool which is only discarded after parallel checkout
finishes. This is done because the entries need to be valid when
run_parallel_checkout() is called.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow make_transient_cache_entry() to optionally receive a mem_pool
struct in which it should allocate the entry. This will be used in the
following patch, to store some transient entries which should persist
until parallel checkout finishes.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
add_pending_object() populates rev.pending, we need to take care of
clearing it once we're done.
This code is run close to the end of a checkout, therefore this leak
seems like it would have very little impact. See also LSAN output
from t0020 below:
Direct leak of 2048 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9acc46 in xrealloc wrapper.c:126:8
#2 0x83e3a3 in add_object_array_with_path object.c:337:3
#3 0x8f672a in add_pending_object_with_path revision.c:329:2
#4 0x8eaeab in add_pending_object_with_mode revision.c:336:2
#5 0x8eae9d in add_pending_object revision.c:342:2
#6 0x5154a0 in show_local_changes builtin/checkout.c:602:2
#7 0x513b00 in merge_working_tree builtin/checkout.c:979:3
#8 0x512cb3 in switch_branches builtin/checkout.c:1242:9
#9 0x50f8de in checkout_branch builtin/checkout.c:1646:9
#10 0x50ba12 in checkout_main builtin/checkout.c:2003:9
#11 0x5086c0 in cmd_checkout builtin/checkout.c:2055:8
#12 0x4cd91d in run_builtin git.c:467:11
#13 0x4cb5f3 in handle_builtin git.c:719:3
#14 0x4ccf47 in run_argv git.c:808:4
#15 0x4caf49 in cmd_main git.c:939:19
#16 0x69e43e in main common-main.c:52:11
#17 0x7f5dd1d50349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 2048 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries in the checkout builtin, ensure
that we have a full index to avoid any unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparatory API changes for parallel checkout.
* mt/parallel-checkout-part-1:
entry: add checkout_entry_ca() taking preloaded conv_attrs
entry: move conv_attrs lookup up to checkout_entry()
entry: extract update_ce_after_write() from write_entry()
entry: make fstat_output() and read_blob_entry() public
entry: extract a header file for entry.c functions
convert: add classification for conv_attrs struct
convert: add get_stream_filter_ca() variant
convert: add [async_]convert_to_working_tree_ca() variants
convert: make convert_attrs() and convert structs public
The declarations of entry.c's public functions and structures currently
reside in cache.h. Although not many, they contribute to the size of
cache.h and, when changed, cause the unnecessary recompilation of
modules that don't really use these functions. So let's move them to a
new entry.h header. While at it let's also move a comment related to
checkout_entry() from entry.c to entry.h as it's more useful to describe
the function there.
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the method safer by allocating a cache_tree member for the given
index_state if it is not already present. This is preferrable to a
BUG() statement or returning with an error because future callers will
want to populate an empty cache-tree using this method.
Callers can also remove their conditional allocations of cache_tree.
Also drop local variables that can be found directly from the 'istate'
parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segmentation fault.
The bug is caused by dereferencing `new_branch_info->commit` when it is
`NULL`, which is the case when the tree-ish argument is actually a tree,
not a commit-ish. This was introduced in 5602b500c3 (builtin/checkout:
fix `git checkout -p HEAD...` bug, 2020-10-07), where we tried to ensure
that the special tree-ish `HEAD...` is handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to specify the repository to use. Rename the function to
repo_clear_commit_marks to document its new scope. No functional change
intended.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" learned to use checkout.guess configuration variable
and enable/disable its "--[no-]guess" option accordingly.
* dl/checkout-guess:
checkout: learn to respect checkout.guess
Documentation/config/checkout: replace sq with backticks
"git checkout -p A...B [-- <path>]" did not work, even though the
same command without "-p" correctly used the merge-base between
commits A and B.
* dl/checkout-p-merge-base:
t2016: add a NEEDSWORK about the PERL prerequisite
add-patch: add NEEDSWORK about comparing commits
Doc: document "A...B" form for <tree-ish> in checkout and switch
builtin/checkout: fix `git checkout -p HEAD...` bug
The current behavior of git checkout/switch is that --guess is currently
enabled by default. However, some users may not wish for this to happen
automatically. Instead of forcing users to specify --no-guess manually
each time, teach these commands the checkout.guess configuration
variable that gives users the option to set a default behavior.
Teach the completion script to recognize the new config variable and
disable DWIM logic if it is set to false.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running `git checkout -p` with a merge-base rev results in an error:
$ git checkout -p HEAD...
usage: git diff-index [-m] [--cached] [<common-diff-options>] <tree-ish> [<path>...]
common diff options:
-z output diff-raw with lines terminated with NUL.
-p output patch format.
-u synonym for -p.
--patch-with-raw
output both a patch and the diff-raw format.
--stat show diffstat instead of patch.
--numstat show numeric diffstat instead of patch.
--patch-with-stat
output a patch and prepend its diffstat.
--name-only show only names of changed files.
--name-status show names and status of changed files.
--full-index show full object name on index lines.
--abbrev=<n> abbreviate object names in diff-tree header and diff-raw.
-R swap input file pairs.
-B detect complete rewrites.
-M detect renames.
-C detect copies.
--find-copies-harder
try unchanged files as candidate for copy detection.
-l<n> limit rename attempts up to <n> paths.
-O<file> reorder diffs according to the <file>.
-S<string> find filepair whose only one side contains the string.
--pickaxe-all
show all files diff when -S is used and hit is found.
-a --text treat all files as text.
Cannot close git diff-index --cached --numstat --summary HEAD... -- () at <redacted>/libexec/git-core/git-add--interactive line 183.
This happens because checkout passes the literal argument (in the
example, `HEAD...`) to diff-index which does not recognise merge-base
revs.
Fix this by using the hex of the found commit instead of the given name.
Note that "HEAD" is handled specially in run_add_interactive() so it's
explicitly not changed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git restore/checkout --no-overlay" with wildcarded pathspec
mistakenly removed matching paths in subdirectories, which has been
corrected.
* rs/checkout-no-overlay-pathspec-fix:
checkout, restore: make pathspec recursive
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
The pathspec given to git checkout and git restore is used with both
tree_entry_interesting (via read_tree_recursive) and match_pathspec
(via ce_path_match). The latter effectively only supports recursive
matching regardless of the value of the pathspec flag "recursive",
which is unset here.
That causes different match results for pathspecs with wildcards, and
can lead checkout and restore in no-overlay mode to remove entries
instead of modifying them. Enable recursive matching for both checkout
and restore to make matching consistent.
Setting the flag in checkout_main() technically also affects git switch,
but since that command doesn't accept pathspecs at all this has no
actual consequence.
Reported-by: Sergii Shkarnikov <sergii.shkarnikov@globallogic.com>
Initial-test-by: Sergii Shkarnikov <sergii.shkarnikov@globallogic.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We unconditionally write a branch name into a newly allocated buffer in
new_branch_info->path, via setup_branch_path(). We then check to see if
the branch exists; if not, we set that field to NULL, leaking the
memory. We should take care to free() it when doing so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code simplification and test coverage enhancement.
* bc/filter-process:
t2060: add a test for switch with --orphan and --discard-changes
builtin/checkout: simplify metadata initialization
When we try to create a branch "foo" based on "origin/master" and give
git commit -b an extra unsupported argument "bar", it confusingly
reports:
$ git checkout -b foo origin/master bar
fatal: 'bar' is not a commit and a branch 'foo' cannot be created from it
$ git checkout --track -b foo origin/master bar
fatal: 'bar' is not a commit and a branch 'foo' cannot be created from it
That's wrong, because it very well understands that "origin/master" is
supposed to be the start point for the new branch and not "bar". Check
if we got a commit and show more fitting messages in that case instead:
$ git checkout -b foo origin/master bar
fatal: Cannot update paths and switch to branch 'foo' at the same time.
$ git checkout --track -b foo origin/master bar
fatal: '--track' cannot be used with updating paths
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call init_checkout_metadata in reset_tree, we want to pass the
object ID of the commit in question so that it can be passed to filters,
or if there is no commit, the tree. We anticipated this latter case,
which can occur elsewhere in the checkout code, but it cannot occur
here. The only case in which we do not have a commit object is when
invoking git switch with --orphan. Moreover, we can only hit this code
path without a commit object additionally with either --force or
--discard-changes.
In such a case, there is no point initializing the checkout metadata
with a commit or tree because (a) there is no commit, only the empty
tree, and (b) we will never use the data, since no files will be smudged
when checking out a branch with no files. Pass the all-zeros object ID
in this case, since we just need some value which is a valid pointer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git restore --staged --worktree" now defaults to take the contents
out of "HEAD", instead of erring out.
* es/restore-staged-from-head-by-default:
restore: default to HEAD when combining --staged and --worktree
In error messages that "git switch" mentions its option to create a
new branch, "-b/-B" options were shown, where "-c/-C" options
should be, which has been corrected.
* dl/switch-c-option-in-error-message:
switch: fix errors and comments related to -c and -C
By default, files are restored from the index for --worktree, and from
HEAD for --staged. When --worktree and --staged are combined, --source
must be specified to disambiguate the restore source[1], thus making it
cumbersome to restore a file in both the worktree and the index.
However, HEAD is also a reasonable default for --worktree when combined
with --staged, so make it the default anytime --staged is used (whether
combined with --worktree or not).
[1]: Due to an oversight, the --source requirement, though documented,
is not actually enforced.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d787d311db (checkout: split part of it to new command 'switch',
2019-03-29), the `git switch` command was created by extracting the
common functionality of cmd_checkout() in checkout_main(). However, in
b7b5fce270 (switch: better names for -b and -B, 2019-03-29), the branch
creation and force creation options for 'switch' were changed to -c and
-C, respectively. As a result of this, error messages and comments that
previously referred to `-b` and `-B` became invalid for `git switch`.
For error messages that refer to `-b` and `-B`, use a format string
instead so that `-c` and `-C` can be printed when `git switch` is
invoked.
Reported-by: Robert Simpson
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide commit metadata for checkout code paths that use unpack_trees
and friends. When we're checking out a commit, use the commit
information, but don't provide commit information if we're checking out
from the index, since there need not be any particular commit associated
with the index, and even if there is one, we can't know what it is.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have the codebase wired up to pass any additional metadata
to filters, let's collect the additional metadata that we'd like to
pass.
The two main places we pass this metadata are checkouts and archives.
In these two situations, reading HEAD isn't a valid option, since HEAD
isn't updated for checkouts until after the working tree is written and
archives can accept an arbitrary tree. In other situations, HEAD will
usually reflect the refname of the branch in current use.
We pass a smaller amount of data in other cases, such as git cat-file,
where we can really only logically know about the blob.
This commit updates only the parts of the checkout code where we don't
use unpack_trees. That function and callers of it will be handled in a
future commit.
In the archive code, we leak a small amount of memory, since nothing we
pass in the archiver argument structure is freed.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we're going to want to use the branch info in
checkout_worktree, so let's pass the whole struct branch_info down, not
just the revision name. We hoist the definition of struct branch_info
so it's in scope.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for inserting a C string into a strbuf. Use it
throughout the source to get rid of magic string length constants and
explicit strlen() calls.
Like strbuf_addstr(), implement it as an inline function to avoid the
implicit strlen() calls to cause runtime overhead.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout X" did not correctly fail when X is not a local
branch but could name more than one remote-tracking branches
(i.e. to be dwimmed as the starting point to create a corresponding
local branch), which has been corrected.
* am/checkout-file-and-ref-ref-ambiguity:
checkout: don't revert file on ambiguous tracking branches
parse_branchname_arg(): extract part as new function
"git restore --staged" did not correctly update the cache-tree
structure, resulting in bogus trees to be written afterwards, which
has been corrected.
* nd/switch-and-restore:
restore: invalidate cache-tree when removing entries with --staged
When "git restore --staged <path>" removes a path that's in the index,
it marks the entry with CE_REMOVE, but we don't do anything to
invalidate the cache-tree. In the non-staged case, we end up in
checkout_worktree(), which calls remove_marked_cache_entries(). That
actually drops the entries from the index, as well as invalidating the
cache-tree and untracked-cache.
But with --staged, we never call checkout_worktree(), and the CE_REMOVE
entries remain. Interestingly, they are dropped when we write out the
index, but that means the resulting index is inconsistent: its
cache-tree will not match the actual entries, and running "git commit"
immediately after will create the wrong tree.
We can solve this by calling remove_marked_cache_entries() ourselves
before writing out the index. Note that we can't just hoist it out of
checkout_worktree(); that function needs to iterate over the CE_REMOVE
entries (to drop their matching worktree files) before removing them.
One curiosity about the test: without this patch, it actually triggers a
BUG() when running git-restore:
BUG: cache-tree.c:810: new1 with flags 0x4420000 should not be in cache-tree
But in the original problem report, which used a similar recipe,
git-restore actually creates the bogus index (and the commit is created
with the wrong tree). I'm not sure why the test here behaves differently
than my out-of-suite reproduction, but what's here should catch either
symptom (and the fix corrects both cases).
Reported-by: Torsten Krah <krah.tm@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For easier understanding, here are the existing good scenarios:
1) Have *no* file 'foo', *no* local branch 'foo' and a *single*
remote branch 'foo'
2) `git checkout foo` will create local branch foo, see [1]
and
1) Have *a* file 'foo', *no* local branch 'foo' and a *single*
remote branch 'foo'
2) `git checkout foo` will complain, see [3]
This patch prevents the following scenario:
1) Have *a* file 'foo', *no* local branch 'foo' and *multiple*
remote branches 'foo'
2) `git checkout foo` will successfully... revert contents of
file `foo`!
That is, adding another remote suddenly changes behavior significantly,
which is a surprise at best and could go unnoticed by user at worst.
Please see [3] which gives some real world complaints.
To my understanding, fix in [3] overlooked the case of multiple remotes,
and the whole behavior of falling back to reverting file was never
intended:
[1] introduces the unexpected behavior. Before, there was fallback
from not-a-ref to pathspec. This is reasonable fallback. After, there
is another fallback from ambiguous-remote to pathspec. I understand
that it was a copy&paste oversight.
[2] noticed the unexpected behavior but chose to semi-document it
instead of forbidding, because the goal of the patch series was
focused on something else.
[3] adds `die()` when there is ambiguity between branch and file. The
case of multiple tracking branches is seemingly overlooked.
The new behavior: if there is no local branch and multiple remote
candidates, just die() and don't try reverting file whether it
exists (prevents surprise) or not (improves error message).
[1] Commit 70c9ac2f ("DWIM "git checkout frotz" to "git checkout -b frotz origin/frotz"" 2009-10-18)
https://public-inbox.org/git/7vaazpxha4.fsf_-_@alter.siamese.dyndns.org/
[2] Commit ad8d5104 ("checkout: add advice for ambiguous "checkout <branch>"", 2018-06-05)
https://public-inbox.org/git/20180502105452.17583-1-avarab@gmail.com/
[3] Commit be4908f1 ("checkout: disambiguate dwim tracking branches and local files", 2018-11-13)
https://public-inbox.org/git/20181110120707.25846-1-pclouds@gmail.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is done for the next commit to avoid crazy 7x tab code padding.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected.
2) It is not allowed to pass pathspec in both args and file.
`you must specify path(s) to restore` block was moved down to be able to
test for `pathspec.nr` instead, because testing for `argc` is no longer
correct.
`git switch` does not support the new options because it doesn't expect
`<pathspec>` arguments.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares
Derrick Stolee
Junio C Hamano
Andrzej Hunt
brian m. carlson
Ævar Arnfjörð Bjarmason
Johannes Schindelin
René Scharfe
Denton Liu
Jonathan Tan
Jeff King
Elijah Newren
Eric Sunshine
brian m. carlson
Alexandr Miloslavskiy