Extract the following functions from builtin/add.c to pathspec.c, in
preparation for reuse by a new git check-ignore command:
- fill_pathspec_matches()
- find_used_pathspec()
The functions being extracted are not changed in any way, except
removal of the 'static' qualifier.
Also add comments documenting these newly public functions,
including clarifications that they operate on the index.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git_terminal_prompt can cleanly interact with /dev/tty on
Solaris, enable HAVE_DEV_TTY so that this code path is used for
credential reading instead of relying on the crippled getpass().
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
block-sha1/ is fast on most known platforms. Clarify the Makefile to
be less misleading about that.
Early versions of block-sha1/ explicitly relied on fast htonl() and
fast 32-bit loads with arbitrary alignment. Now it uses those on some
arches but the default behavior is byte-at-a-time access for the sake
of arches like ARM, Alpha, and their kin and it is still pretty fast
on these arches (fast enough to supersede the mozilla SHA1
implementation and the hand-written ARM assembler implementation that
were bundled before).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I invoke "make block-sha1/sha1.s", 'make' runs $(CC) -S without
specifying where it should put its output and the output ends up in
./sha1.s. Confusing.
Add an -o option to the .s rule to fix this. We were already doing
that for most compiler invocations but had forgotten it for the
assembler listings.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Cygwin implementation of pread() is not thread-safe since, just
like the emulation provided by compat/pread.c, it uses a sequence of
seek-read-seek calls. In order to avoid failues due to thread-safety
issues, commit b038a61 disables threading when NO_PREAD is defined.
(ie when using the emulation code in compat/pread.c).
We introduce a new build variable, NO_THREAD_SAFE_PREAD, which allows
use to disable the threaded index-pack code on cygwin, in addition to
the above NO_PREAD case.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 20fc9bc (Set HTTP user agent to git/GIT_VERSION, 2006-04-04),
http.o started recording GIT_VERSION, but http.o wasn't added
to the list of files that depends on GIT-VERSION-FILE.
Fix this, so mofications to GIT-VERSION-FILE will result in an
updated user-agent string.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
Your build platform may support hardlinks but you may prefer not to use
them, e.g. when installing to DESTDIR to make a tarball and untarring on
a filesystem that has poor support for hardlinks.
The Makefile in git-gui project may need to learn to honor the same
setting; it unconditionally creates git-citool by hardlinking git-gui.
* jc/install-no-hardlinks:
Makefile: NO_INSTALL_HARDLINKS
This puts delta resolving on each base on a separate thread, one base
cache per thread. Per-thread data is grouped in struct thread_local.
When running with nr_threads == 1, no pthreads calls are made. The
system essentially runs in non-thread mode.
An experiment on a Xeon 24 core machine with git.git shows that
performance does not increase proportional to the number of cores. So
by default, we use maximum 3 cores. Some numbers with --threads from 1
to 16:
1..4
real 0m8.003s 0m5.307s 0m4.321s 0m3.830s
user 0m7.720s 0m8.009s 0m8.133s 0m8.305s
sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s
5..8
real 0m3.727s 0m3.604s 0m3.332s 0m3.369s
user 0m9.361s 0m9.817s 0m9.525s 0m9.769s
sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s
9..12
real 0m3.036s 0m3.139s 0m3.177s 0m2.961s
user 0m8.977s 0m10.205s 0m9.737s 0m10.073s
sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s
13..16
real 0m2.985s 0m2.894s 0m2.975s 0m2.971s
user 0m9.825s 0m10.573s 0m10.833s 0m11.361s
sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s
On an Intel dual core and linux-2.6.git
1..4
real 2m37.789s 2m7.963s 2m0.920s 1m58.213s
user 2m28.415s 2m52.325s 2m50.176s 2m41.187s
sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s
Thanks Ramsay Jones for troubleshooting and support on MinGW platform.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Your filesystem may support hardlinks, but you may choose not to use them
when installing git-foo builtins and favor symblic links or copies for
whatever reason.
The installation procedure of git-gui/ directory is not touched with this
patch and git-citool still ends up being a hardlink to git-gui, but it
needs to be addressed separately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tend to keep long lists sorted (extensions are not taken into
account), which helps spot a name easily by eye. Rearrange a few
items so these lists remain sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
Use word-at-a-time comparison to find end of line or NUL (end of buffer),
borrowed from the linux-kernel discussion.
By Thomas Rast
* tr/xdiff-fast-hash:
xdiff: choose XDL_FAST_HASH code on sizeof(long) instead of __WORDSIZE
xdiff: load full words in the inner loop of xdl_hash_record
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
Trivially shrinks the on-disk size of the index file to save both I/O and
checksum overhead.
The topic should give a solid base to build on further updates, with the
code refactoring in its earlier parts, and the backward compatibility
mechanism in its later parts.
* jc/index-v4:
index-v4: document the entry format
unpack-trees: preserve the index file version of original
update-index: upgrade/downgrade on-disk index version
read-cache.c: write prefix-compressed names in the index
read-cache.c: read prefix-compressed names in index on-disk version v4
read-cache.c: move code to copy incore to ondisk cache to a helper function
read-cache.c: move code to copy ondisk to incore cache to a helper function
read-cache.c: report the header version we do not understand
read-cache.c: make create_from_disk() report number of bytes it consumed
read-cache.c: allow unaligned mapping of the index file
cache.h: hide on-disk index details
varint: make it available outside the context of pack
A column option string consists of many token separated by either
a space or a comma. A token belongs to one of three groups:
- enabling: always, never and auto
- layout mode: currently plain (which does not layout at all)
- other future tuning flags
git-column can be used to pipe output to from a command that wants
column layout, but not to mess with its own output code. Simpler output
code can be changed to use column layout code directly.
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also marks most common commands' synopsis for translation
so that "git help" gives a friendly listing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
Setting up a revision traversal with many starting points was inefficient
as these were placed in a date-order priority queue one-by-one.
By René Scharfe (3) and Junio C Hamano (1)
* rs/commit-list-sort-in-batch:
mergesort: rename it to llist_mergesort()
revision: insert unsorted, then sort in prepare_revision_walk()
commit: use mergesort() in commit_list_sort_by_date()
add mergesort() for linked lists
Make it easier for distros to document custom pager and editor they
used when building their binary releases in "git var" documentation.
By Jonathan Nieder
* jn/debian-customizes-default-editor:
var doc: advertise current DEFAULT_PAGER and DEFAULT_EDITOR settings
var doc: default editor and pager are configurable at build time
Translation markers may be present in header files too. Make sure we
don't miss any.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a generic bottom-up mergesort implementation for singly linked
lists. It was inspired by Simon Tatham's webpage on the topic[1], but
not so much by his implementation -- for no good reason, really, just a
case of NIH.
[1] http://www.chiark.greenend.org.uk/~sgtatham/algorithms/listsort.html
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the default pager and editor chosen at compile time in the
git-var(1) manpage so users curious about what command _this_ copy of
git will fall back to when EDITOR, VISUAL, and PAGER are unset can
find the answer quickly.
In builds leaving those settings uncustomized, this patch makes the
manpage continue to say "usually vi" and "usually less" so the
formatted documentation is usable for a wide audience including users
of custom builds that change those settings. If you would like your
copy of the docs to be less noncommittal, you will need to set
DEFAULT_PAGER=less and DEFAULT_EDITOR=vi explicitly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redo the hashing loop in xdl_hash_record in a way that loads an entire
'long' at a time, using masking tricks to see when and where we found
the terminating '\n'.
I stole inspiration and code from the posts by Linus Torvalds around
https://lkml.org/lkml/2012/3/2/452https://lkml.org/lkml/2012/3/5/6
His method reads the buffers in sizeof(long) increments, and may thus
overrun it by at most sizeof(long)-1 bytes before it sees the final
newline (or hits the buffer length check). I considered padding out
all buffers by a suitable amount to "catch" the overrun, but
* this does not work for mmap()'d buffers: if you map 4096+8 bytes
from a 4096 byte file, accessing the last 8 bytes results in a
SIGBUS on my machine; and
* it would also be extremely ugly because it intrudes deep into the
unpacking machinery.
So I adapted it to not read beyond the buffer at all. Instead, it
reads the final partial word byte-by-byte and strings it together.
Then it can use the same logic as before to finish the hashing.
So far we enable this only on x86_64, where it provides nice speedup
for diff-related work:
Test origin/next tr/xdiff-fast-hash
-----------------------------------------------------------------------------
4000.1: log -3000 (baseline) 0.07(0.05+0.02) 0.08(0.06+0.02) +14.3%
4000.2: log --raw -3000 (tree-only) 0.37(0.33+0.04) 0.37(0.32+0.04) +0.0%
4000.3: log -p -3000 (Myers) 1.75(1.65+0.09) 1.60(1.49+0.10) -8.6%
4000.4: log -p -3000 --histogram 1.73(1.62+0.09) 1.58(1.49+0.08) -8.7%
4000.5: log -p -3000 --patience 2.11(2.00+0.10) 1.94(1.80+0.11) -8.1%
Perhaps other platforms could also benefit. However it does NOT work
on big-endian systems!
[jc: minimum style and compilation fixes]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the testing of the 1.7.10 rc series on Solaris for OpenCSW, it
was discovered that t7006-pager was failing due to finding a bad "sh"
in PATH after a call to execvp("sh", ...). This call was setup by
run_command.c:prepare_shell_cmd.
The PATH in use at the time saw /opt/csw/bin given precedence to
traditional Solaris paths such as /usr/bin and /usr/xpg4/bin. A
package named schilyutils (Joerg Schilling's utilities) was installed
on the build system and it delivered a modified version of the
traditional Solaris /usr/bin/sh as /opt/csw/bin/sh. This version of
sh suffers from many of the same problems as /usr/bin/sh.
The command-specific pager test failed due to the broken "sh" handling
^ as a pipe character. It tried to fork two processes when it
encountered "sed s/^/foo:/" as the pager command. This problem was
entirely dependent on the PATH of the user at runtime.
Possible fixes for this issue are:
1. Use the standard system() or popen() which both launch a POSIX
shell on Solaris as long as _POSIX_SOURCE is defined.
2. The git wrapper could prepend SANE_TOOL_PATH to PATH thus forcing
all unqualified commands run to use the known good tools on the
system.
3. The run_command.c:prepare_shell_command() could use the same
SHELL_PATH that is in the #! line of all all scripts and not rely
on PATH to find the sh to run.
Option 1 would preclude opening a bidirectional pipe to a filter
script and would also break git for Windows as cmd.exe is spawned from
system() (cf. v1.7.5-rc0~144^2, "alias: use run_command api to execute
aliases, 2011-01-07).
Option 2 is not friendly to users as it would negate their ability to
use tools of their choice in many cases. Alternately, injecting
SANE_TOOL_PATH such that it takes precedence over /bin and /usr/bin
(and anything with lower precedence than those paths) as
git-sh-setup.sh does would not solve the problem either as the user
environment could still allow a bad sh to be found. (Many OpenCSW
users will have /opt/csw/bin leading their PATH and some subset would
have schilyutils installed.)
Option 3 allows us to use a known good shell while still honouring the
users' PATH for the utilities being run. Thus, it solves the problem
while not negatively impacting either users or git's ability to run
external commands in convenient ways. Essentially, the shell is a
special case of tool that should not rely on SANE_TOOL_PATH and must
be called explicitly.
With this patch applied, any code path leading to
run_command.c:prepare_shell_cmd can count on using the same sane shell
that all shell scripts in the git suite use. Both the build system
and run_command.c will default this shell to /bin/sh unless
overridden.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
Starting with commit v1.7.8-165-g0579f91, grep.h includes
thread-utils.h, so the latter has to be added to LIB_H.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file 'po/git.pot' is generated using the command 'make pot'
against git v1.7.9-209-gb6b3b (Update draft release notes to 1.7.10).
Since po/git.pot is tracked, remove the entry from .gitignore, and
not delete the file again when doing 'make distclean'.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Adam Spiers
Junio C Hamano
Ramsay Jones
Ben Walton
Jonathan Nieder
Erik Faye-Lund
Nguyễn Thái Ngọc Duy
René Scharfe
Thomas Rast
Pete Wyckoff
Heiko Voigt
Jiang Xin
Dmitry V. Levin