hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that shortlog supports reading from trailers, it can be useful to
combine counts from multiple trailers, or between trailers and authors.
This can be done manually by post-processing the output from multiple
runs, but it's non-trivial to make sure that each name/commit pair is
counted only once.
This patch teaches shortlog to accept multiple --group options on the
command line, and pull data from all of them. That makes it possible to
run:
git shortlog -ns --group=author --group=trailer:co-authored-by
to get a shortlog that counts authors and co-authors equally.
The implementation is mostly straightforward. The "group" enum becomes a
bitfield, and the trailer key becomes a list. I didn't bother
implementing the multi-group semantics for reading from stdin. It would
be possible to do, but the existing matching code makes it awkward, and
I doubt anybody cares.
The duplicate suppression we used for trailers now covers authors and
committers as well (though in non-trailer single-group mode we can skip
the hash insertion and lookup, since we only see one value per commit).
There is one subtlety: we now care about the case when no group bit is
set (in which case we default to showing the author). The caller in
builtin/log.c needs to be adapted to ask explicitly for authors, rather
than relying on shortlog_init(). It would be possible with some
gymnastics to make this keep working as-is, but it's not worth it for a
single caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trailers don't necessarily contain name/email identity values, so
shortlog has so far treated them as opaque strings. However, since many
trailers do contain identities, it's useful to treat them as such when
they can be parsed. That lets "-e" work as usual, as well as mailmap.
When they can't be parsed, we'll continue with the old behavior of
treating them as a single string (there's no new test for that here,
since the existing tests cover a trailer like this).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is actually useful for parsing any identity, whether from
stdin or not. We'll need it for handling trailers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation is vague about what happens with
--group=trailer:signed-off-by when we see a commit with:
Signed-off-by: One
Signed-off-by: Two
Signed-off-by: One
We clearly should credit both "One" and "Two", but should "One" get
credited twice? The current code does so, but mostly because that was
the easiest thing to do. It's probably more useful to count each commit
at most once. This will become especially important when we allow
values from multiple sources in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a project uses commit trailers, this patch lets you use
shortlog to see who is performing each action. For example,
running:
git shortlog -ns --group=trailer:reviewed-by
in git.git shows who has reviewed. You can even use a custom
format to see things like who has helped whom:
git shortlog --format="...helped %an (%ad)" \
--group=trailer:helped-by
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding more grouping types, let's refactor the
committer/author grouping code and add a user-facing option that binds
them together. In particular:
- the main option is now "--group", to make it clear
that the various group types are mutually exclusive. The
"--committer" option is an alias for "--group=committer".
- we keep an enum rather than a binary flag, to prepare
for more values
- we prefer switch statements to ternary assignment, since
other group types will need more custom code
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already match "committer", and we're about to start
matching more things. Let's use a more neutral variable to
avoid confusion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse-options machinery learned to refrain from enclosing
placeholder string inside a "<bra" and "ket>" pair automatically
without PARSE_OPT_LITERAL_ARGHELP. Existing help text for option
arguments that are not formatted correctly have been identified and
fixed.
* rs/parse-opt-lithelp:
parse-options: automatically infer PARSE_OPT_LITERAL_ARGHELP
shortlog: correct option help for -w
send-pack: specify --force-with-lease argument help explicitly
pack-objects: specify --index-version argument help explicitly
difftool: remove angular brackets from argument help
add, update-index: fix --chmod argument help
push: use PARSE_OPT_LITERAL_ARGHELP instead of unbalanced brackets
Parseopt wraps argument help strings in a pair of angular brackets by
default, to tell users that they need to replace it with an actual
value. This is useful in most cases, because most option arguments
are indeed single values of a certain type. The option
PARSE_OPT_LITERAL_ARGHELP needs to be used in option definitions with
arguments that have multiple parts or are literal strings.
Stop adding these angular brackets if special characters are present,
as they indicate that we don't deal with a simple placeholder. This
simplifies the code a bit and makes defining special options slightly
easier.
Remove the flag PARSE_OPT_LITERAL_ARGHELP in the cases where the new
and more cautious handling suffices.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap the placeholders in the option help string for -w in pairs of
angular brackets to document that users need to replace them with actual
numbers. Use the flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt
from adding another pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag --contains no-such-commit" gave a full list of options
after giving an error message.
* ps/contains-id-error-message:
parse-options: do not show usage upon invalid option value
Usually, the usage should be shown only if the user does not know what
options are available. If the user specifies an invalid value, the user
is already aware of the available options. In this case, there is no
point in displaying the usage anymore.
This patch applies to "git tag --contains", "git branch --contains",
"git branch --points-at", "git for-each-ref --contains" and many more.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are outside a repo and have any arguments left after
option-parsing, `setup_revisions()` will try to do its job and
something like this will happen:
$ git shortlog v2.16.0..
BUG: environment.c:183: git environment hasn't been setup
Aborted (core dumped)
The usage is wrong, but we could obviously handle this better. Note that
commit abe549e179 (shortlog: do not require to run from inside a git
repository, 2008-03-14) explicitly enabled `git shortlog` to run from
outside a repo, since we do not need a repo for parsing data from stdin.
Disallow left-over arguments when run from outside a repo.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been missing since we learned to print usage, way back in
4e27fb06f (add commit count options to git-shortlog, 2006-10-06).
While at it, drop the [] around "<path>...". This matches `git log -h`
and Documentation/git-{short}log.txt. It formally makes it look like we
do not allow `git shortlog --`, but we gain readability and consistency.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shortlog command parsed the output of
git-log, and the logic went something like this:
1. Read stdin looking for "author" lines.
2. Parse the identity into its name/email bits.
3. Apply mailmap to the name/email.
4. Reformat the identity into a single buffer that is our
"key" for grouping entries (either a name by default,
or "name <email>" if --email was given).
The first part happens in read_from_stdin(), and the other
three steps are part of insert_one_record().
When we do an internal traversal, we just swap out the stdin
read in step 1 for reading the commit objects ourselves.
Prior to 2db6b83d18 (shortlog: replace hand-parsing of
author with pretty-printer, 2016-01-18), that made sense; we
still had to parse the ident in the commit message.
But after that commit, we use pretty.c's "%an <%ae>" to get
the author ident (for simplicity). Which means that the
pretty printer is doing a parse/format under the hood, and
then we parse the result, apply the mailmap, and format the
result again.
Instead, we can just ask pretty.c to do all of those steps
for us (including the mailmap via "%aN <%aE>", and not
formatting the address when --email is missing).
And then we can push steps 2-4 into read_from_stdin(). This
speeds up "git shortlog -ns" on linux.git by about 3%, and
eliminates a leak in insert_one_record() of the namemailbuf
strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The string after_subject is added to a strbuf by pp_title_line() if
it's not NULL. Adding an empty string has the same effect as not
adding anything, but the latter is easier, so don't bother changing
the context member from NULL to "".
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly
when it's needed instead of letting log_write_email_headers() prepare
it in a static buffer in advance. This simplifies storage ownership and
code flow.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some situations you may want to group the commits not by author,
but by committer instead.
For example, when I just wanted to look up what I'm still missing from
linux-next in the current merge window, I don't care so much about who
wrote a patch, as what git tree it came from, which generally boils
down to "who committed it".
So make git shortlog take a "-c" or "--committer" option to switch
grouping to that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert two more qsort(3) calls to QSORT to reduce code size and for
better safety and consistency.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands in the "log/diff" family have had an FILE* pointer in the
data structure they pass around for a long time, but some codepaths
used to always write to the standard output. As a preparatory step
to make "git format-patch" available to the internal callers, these
codepaths have been updated to consistently write into that FILE*
instead.
* js/log-to-diffopt-file:
mingw: fix the shortlog --output=<file> test
diff: do not color output when --color=auto and --output=<file> is given
t4211: ensure that log respects --output=<file>
shortlog: respect the --output=<file> setting
format-patch: use stdout directly
format-patch: avoid freopen()
format-patch: explicitly switch off color when writing to files
shortlog: support outputting to streams other than stdout
graph: respect the diffopt.file setting
line-log: respect diffopt's configured output file stream
log-tree: respect diffopt's configured output file stream
log: prepare log/log-tree to reuse the diffopt.close_file attribute
Thanks to the diff option parsing, we already know about this option.
We just have to make use of it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will be needed to avoid freopen() in `git format-patch`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need for these option variables to be static,
except that they are referenced by the options array itself,
which is static. But having all of this static is simply
unnecessary and confusing (and inconsistent with most other
commands, which either use a static global option list or a
true function-local one).
Note that in some cases we may need to actually initialize
the variables (since we cannot rely on BSS to do so). This
is a net improvement to readability, though, as we can use
the more verbose initializers for our string_lists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git shortlog" used to accumulate various pieces of information
regardless of what was asked to be shown in the final output. It
has been optimized by noticing what need not to be collected
(e.g. there is no need to collect the log messages when showing
only the number of changes).
* jk/shortlog:
shortlog: don't warn on empty author
shortlog: optimize out useless string list
shortlog: optimize out useless "<none>" normalization
shortlog: optimize "--summary" mode
shortlog: replace hand-parsing of author with pretty-printer
shortlog: use strbufs to read from stdin
shortlog: match both "Author:" and "author" on stdin
Git tries to avoid creating a commit with an empty author
name or email. However, commits created by older, less
strict versions of git may still be in the history. There's
not much point in issuing a warning to stderr for an empty
author. The user can't do anything about it now, and we are
better off to simply include it in the shortlog output as an
empty name/email, and let the caller process it however they
see fit.
Older versions of shortlog differentiated between "author
header not present" (which complained) and "author
name/email are blank" (which included the empty ident in the
output). But since switching to format_commit_message, we
complain to stderr about either case (linux.git has a blank
author deep in its history which triggers this).
We could try to restore the older behavior (complaining only
about the missing header), but in retrospect, there's not
much point in differentiating these cases. A missing
author header is bogus, but as for the "blank" case, the
only useful behavior is to add it to the "empty name"
collection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in "--summary" mode, then we do not care about the
actual list of subject onelines associated with each author.
We care only about the number. So rather than store a
string-list for each author full of "<none>", let's just
keep a count.
This drops my best-of-five for "git shortlog -ns HEAD" on
linux.git from:
real 0m5.194s
user 0m5.028s
sys 0m0.168s
to:
real 0m5.057s
user 0m4.916s
sys 0m0.144s
That's about 2.5%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in --summary mode, we will always pass <none> to
insert_one_record, which will then do some normalization
(e.g., cutting out "[PATCH]"). There's no point in doing so
if we aren't going to use the result anyway.
This drops my best-of-five for "git shortlog -ns HEAD" on
linux.git from:
real 0m5.257s
user 0m5.104s
sys 0m0.156s
to:
real 0m5.194s
user 0m5.028s
sys 0m0.168s
That's only 1%, but arguably the result is clearer to read,
as we're able to group our variable declarations inside the
conditional block. It also opens up further optimization
possibilities for future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user asked us only to show counts for each author,
rather than the individual summary lines, then there is no
point in us generating the summaries only to throw them
away. With this patch, I measured the following speedup for
"git shortlog -ns HEAD" on linux.git (best-of-five):
[before]
real 0m5.644s
user 0m5.472s
sys 0m0.176s
[after]
real 0m5.257s
user 0m5.104s
sys 0m0.156s
That's only ~7%, but it's so easy to do, there's no good
reason not to. We don't have to touch any downstream code,
since we already fill in the magic string "<none>" to handle
commits without a message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gathering the author and oneline subject for each
commit, we hand-parse the commit headers to find the
"author" line, and then continue past to the blank line at
the end of the header.
We can replace this tricky hand-parsing by simply asking the
pretty-printer for the relevant items. This also decouples
the author and oneline parsing, opening up some new
optimizations in further commits.
One reason to avoid the pretty-printer is that it might be
less efficient than hand-parsing. However, I measured no
slowdown at all running "git shortlog -ns HEAD" on
linux.git.
As a bonus, we also fix a memory leak in the (uncommon) case
that the author field is blank.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use fixed-size buffers with fgets(), which
could lead to incorrect results in the unlikely event that a
line had something like "Author:" at exactly its 1024th
character.
But it's easy to convert this to a strbuf, and because we
can reuse the same buffer through the loop, we don't even
pay the extra allocation cost.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shortlog could read both the normal "git
log" output as well as "git log --format=raw". However, when
it was converted to C by b8ec592 (Build in shortlog,
2006-10-22), the trailing colon became mandatory, and we no
longer matched the raw output.
Given the amount of intervening time without any bug
reports, it's probable that nobody cares. But it's
relatively easy to fix, and the end result is hopefully more
readable than the original.
Note that this no longer matches "author: ", which we did
before, but that has never been a format generated by git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of git's traversals are robust against minor breakages
in commit data. For example, "git log" will still output an
entry for a commit that has a broken encoding or missing
author, and will not abort the whole operation.
Shortlog, on the other hand, will die as soon as it sees a
commit without an author, meaning that a repository with
a broken commit cannot get any shortlog output at all.
Let's downgrade this fatal error to a warning, and continue
the operation.
We simply ignore the commit and do not count it in the total
(since we do not have any author under which to file it).
Alternatively, we could output some kind of "<empty>" record
to collect these bogus commits. It is probably not worth it,
though; we have already warned to stderr, so the user is
aware that such bogosities exist, and any placeholder we
came up with would either be syntactically invalid, or would
potentially conflict with real data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"--" is used to separate pathspecs from the rev specs, and not rev
specs from the options, as the shortlog_usage string currently
indicates. In correcting this usage string, make it consistent with
the log_usage string.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
Elijah Newren
Jeff King
Denton Liu
Junio C Hamano
Nguyễn Thái Ngọc Duy
René Scharfe
Paul-Sebastian Ungureanu
Martin Ågren
Brandon Williams
Linus Torvalds
Johannes Schindelin
brian m. carlson
Alex Henrie
Christian Couder
Jonathan Nieder
Stefan Beller
Alexey Shumkin
Ramkumar Ramachandra