When you have a lot of submodules checked out, the time penalty to check
for dirty submodules can easily imply a multiplication of the total time
by the factor 20. This makes the difference between almost instantaneous
(< 2 seconds) and unbearably slow (> 50 seconds) here, since the disk
caches are constantly overloaded.
To this end, the submodule.*.ignore config option was introduced, but it
is per-submodule.
This commit introduces a global config setting to set a default
(porcelain) value for the --ignore-submodules option, keeping the
default at 'none'. It can be overridden by the submodule.*.ignore
setting and by the --ignore-submodules option.
Incidentally, this commit fixes an issue with the overriding logic:
multiple --ignore-submodules options would not clear the previously
set flags.
While at it, fix a typo in the documentation for submodule.*.ignore.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is parsed for "submodule.<name>.ignore" entries
before looking for them in .git/config. Thus settings found in .git/config
will override those from .gitmodules, thereby allowing the local developer
to ignore settings given by the remote side while also letting upstream
set defaults for those users who don't have special needs.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote HTTP server fails (e.g. returns 404 or 500) when we
posted the RPC to it, we won't have sent anything to the background
Git process that is supposed to handle the stream. Because we
didn't send anything, its waiting for input from remote-curl, and
remote-curl cannot read its response payload because doing so would
lead to a deadlock.
Send the background task EOF on its input before we try to read
its response back, that way it will break out of its read loop
and terminate.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ref-format --branch requires access to the repository
to resolve refs like @{-1}.
Noticed by Nguyễn Thái Ngọc Duy.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for each subcommand should be easier to read and manipulate
this way.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows WEBrick to support all the logging functionality
in a manner consistent with the other web servers.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since there are WEBrick configuration settings (including the
upcoming AccessLog support) that cannot be represented in YAML
and require Ruby anyways, the YAML config file is an unnecessary
layer of complexity.
Additionally, the shell script wrapper to start WEBrick is
unecessary since our generated Ruby script can be made
executable in the same manner with /usr/bin/env.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This has been broken since commit be5347b ("httpd logs in a
"$httpd_only" subdirectory").
Since WEBrick has no other way of preserving environment
variables needed for gitweb, we create a shell script wrapper
that sets the environment variables as our CGI interpreter
to run gitweb.cgi.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This change allows git-svn to handle an URL with colons in the path
[ew: rewritten to use uri_decode() function]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is a shorthand similar to --system but instead uses
the config file of the current repository.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
contrib/svn-fe: Add the svn-fe target to .gitignore
contrib/svn-fe: Fix IncludePath
Fix DIFF_QUEUE_CLEAR refactoring
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
* pt/git-gui:
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
git-rebase calls out to merge strategies, but did not support merge
strategy options so far. Add this, in the same style used in
git-merge.
Sadly we have to do the full quoting/eval dance here, since
merge-recursive supports the --subtree=<path> option which potentially
contains whitespace.
This patch does not cover git rebase -i, which does not call any merge
strategy directly except in --preserve-merges, and even then only for
merges.
[jc: with a trivial fix-up for 'expr']
Signed-off-by: Mike Lundy <mike@fluffypenguin.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the path "../../vcs-svn" while compiling it in the Makefile
and change svn-fe.c to include svndump.h.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current description in the pull man page does not say much more
than that “git pull” is fetch + merge. Though that is all a person
needs to know in the end, it would be useful to summarize a bit about
what those commands do for new readers.
Most of this description is taken from the “git merge” docs.
Now that we explain how to back out of a failed merge (reset --merge),
we can tone down the warning against that a bit.
Except, as Thomas noticed, there’s a risk with that because people
might read this version of the manpage online and then conclude that
it is safe to try a merge with uncommitted changes, only to find that
their “git reset” doesn't support --merge yet. Or worse, verify that
their git-reset has --merge by a quick test (1b5b465 is in 1.6.2) but
then find that it does not help with backing out of a merge (e11d7b5
is only in 1.7.0!). So keep the warning.
With clarifications from Ævar, Thomas, and Junio.
Noticed-by: Geoff Russell <geoffrey.russell@gmail.com>
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When printing an error message saying a ref was requested that we do not
have, only print that ref, rather than the ref and everything sent to us
on the same packet line (e.g. protocol support specifications).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flags --start, --stop, and --restart can be used without the "--".
Document this feature.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Run $post_dispatch_hook->() not $pre_dispatch_hook->() after each
request.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parser tried to clean up the object flags it used while finding
commits with matching string, but was not doing a very good job at it.
This caused "checkout -b new ':/token'", which internally tries to parse
':/token' twice as an object name, to fail when the commit in question
was reachable from only one ref.
The mask bits given to pop_most_recent_commit(&list, MASK) means "I have
already been on the list to be processed, so please do not place me again
even if I am found to be a parent of some other commit on the list." So
mark them when we add them to the list at the beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Teach git-ls-files a new option --debug that just tacks all available
data from the cache onto each file's line.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
test-lib: Remove 3 year old no-op --no-python option
test-lib: Ignore --quiet under a TAP harness
Documentation/rev-parse: quoting is required with --parseopt
Documentation: reporting bugs
Fix git rebase --continue to work with touched files
Document ls-files -t as semi-obsolete.
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Creating a variable nr here to use throughout the function only to change
refspec_nr to nr at the end, having not used refspec_nr the entire time,
is rather pointless. Instead, simply increment refspec_nr.
While at it, use ALLOC_GROW() instead of xrealloc().
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitolite's contrib/gitweb/gitweb.conf includes:
$ENV{GL_USER} = $cgi->remote_user || "gitweb";
which is useful for setups where a user has to be authenticated
to access certain repos. Perhaps other typical configurations
change per session in other ways, too.
v1.7.2-rc2~6 (gitweb: Move evaluate_gitweb_config out of run_request,
2010-07-05) broke such configurations for a speedup, by loading
the configuration once per FastCGI process.
Probably in the end there should be a way to specify in the
configuration whether a particular installation wants the speedup or
the flexibility. But for now it is easier to just undo the relevant
change.
This partially reverts commit 869d58813b24c74e84c9388041eafcef40cb51e4.
Reported-by: Julio Lajara <julio.lajara@alum.rpi.edu>
Analysis-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the rest of the script to more closely follow the test
style guide. Guarding setup commands with test_expect_success
makes it easy to see the scope in which some particular data is
used; removal of whitespace after >redirection operators is just
for consistency.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: fix size and position of window panes on startup
git-gui: mc cannot be used before msgcat has been loaded
git-gui: use textconv filter for diff and blame
git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32
git-gui: fix shortcut creation on cygwin
git-gui: fix PATH environment for mingw development environment
git-gui: fix usage of _gitworktree when creating shortcut for windows
git-gui: fix "Explore Working Copy" for Windows again
git-gui: fix usage of themed widgets variable
git-gui: Handle failure of core.worktree to identify the working directory.
git-gui: check whether systems nice command works or disable it
When calling rev-parse --parseopt, as in the (now fixed) documented
example
eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
the outermost quoting is required, as otherwise all runs of arbitrary
whitespace inside the resulting 'set -- ...' call would be collapsed
into a single space.
This was exposed as a result of our new use of cat <<\EOF since
47e9cd2 (parseopt: wrap rev-parse --parseopt usage for eval
consumption, 2010-06-12), but has always been a problem when handling
arguments containing e.g. newlines.
Point this out in the documentation, and in particular correct the
example that did not have the quotes.
Noticed-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It introduced a macro to reduce repeated assignments to three fields,
but an unrelated and incorrect change snuck in by mistake, which broke
commands like "git diff-files -p --submodule".
Noticed by Sven Verdoolaege.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The themed panedwindow needs to have the sash position set after the
widget has been mapped therefore apply this setting in the Map event
binding. To avoid visible redraws as the application is constructed
the main window should be withdrawn until all the widgets have been added
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
If someone attempts to use an older version that Tk 8.4 the error was
masked by the lack of a mc command.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Create a checkbox "Use Textconv For Diffs and Blame" in git-gui options.
If checked and if the driver for the concerned file exists, git-gui calls diff
and blame with --textconv option
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
On Windows the Control-C binding is used to copy and is mapped to the Tk
virtual event <<Copy>>. In the initial git-gui dialog this is also bound
as an accelerator for the Clone menu item. The effect is that both bindings
run, copying the text but resetting the clone page or switching to the clone
page when the user tries to copy text from one of the entry fields.
This patch avoids this by using Control-L instead for Windows only.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
When the user tried to create a desktop icon with git gui on cygwin
wscript was complaining about an unknown option and displaying the
non-native path as such.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
When creating a desktop shortcut from the gui the shortcut directly
starts wish with the git-gui script. In the msysgit development
environment some dll's reside in the mingw/bin directory which causes
that git can not start because libiconv2.dll is not found.
When using such a link the error is even more cryptic stating:
"child killed: unknown signal"
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
It has already been fixed in commit 454efb47 (git-gui (Win): make
"Explore Working Copy" more robust, 2009-04-01), but has been broken in
commit 21985a11 (git-gui: handle non-standard worktree locations,
2010-01-23) by accidentally replacing too much with a new variable.
The problem can be reproduced when starting git-gui from within a
subdirectory. The solution is to convert the path name, explorer.exe is
invoked with, to a platform native name.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Introduce a new option 'svn.pathnameencoding' that instructs git svn to
recode pathnames to a given encoding. It can be used by windows users
and by those who work in non-utf8 locales to avoid corrupted file names
with non-ascii characters.
[rp: renamed the option and added manpage documentation]
Signed-off-by: Dmitry Statyvka <dstatyvka@tmsoft-ltd.kiev.ua>
Signed-off-by: Robert Pollak <robert.pollak@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Move highlight config out of guess_file_syntax() so that it can be
extended/overridden by system/user configuration.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
