When our pickaxe code feeds file contents to regexec(), it implicitly
assumes that the file contents are read into implicitly NUL-terminated
buffers (i.e. that we overallocate by 1, appending a single '\0').
This is not so.
In particular when the file contents are simply mmap()ed, we can be
virtually certain that the buffer is preceding uninitialized bytes, or
invalid pages.
Note that the test we add here is known to be flakey: we simply cannot
know whether the byte following the mmap()ed ones is a NUL or not.
Typically, on Linux the test passes. On Windows, it fails virtually
every time due to an access violation (that's a segmentation fault for
you Unix-y people out there). And Windows would be correct: the
regexec() call wants to operate on a regular, NUL-terminated string,
there is no NUL in the mmap()ed memory range, and it is undefined
whether the next byte is even legal to access.
When run with --valgrind it demonstrates quite clearly the breakage, of
course.
Being marked with `test_expect_failure`, this test will sometimes be
declare "TODO fixed", even if it only passes by mistake.
This test case represents a Minimal, Complete and Verifiable Example of
a breakage reported by Chris Sidi.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
die is not a standard shell function. Use
a different shell code for the example.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subdirectory 'sub' is created early in the test file. Later, a test
case removes it during its clean-up actions. However, this test case is
protected by POSIXPERM. Consequently, 'sub' remains when the POSIXPERM
prerequisite is not satisfied. Later, a recently introduced test case
creates 'sub' again. Use -p with mkdir so that it does not fail if 'sub'
already exists.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mailinfo currently handles multi-line headers, but it does not handle
multi-line in-body headers. Teach it to handle such headers, for
example, for this input:
From: author <author@example.com>
Date: Fri, 9 Jun 2006 00:44:16 -0700
Subject: a very long
broken line
Subject: another very long
broken line
interpret the in-body subject to be "another very long broken line"
instead of "another very long".
An existing test (t/t5100/msg0015) has an indented line immediately
after an in-body header - it has been modified to reflect the new
functionality.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While marking individual messages for translation, consolidate some
messages "option 'foo' requires a value" that is used for many
options into one by introducing a helper function to die with the
message with the option name embedded in it, and ask the translators
to localize that single message instead.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an alias for --subject-prefix='RFC PATCH', which is used
commonly in some development communities to deserve such a
short-hand.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two functions in parse_branchname_arg(), verify_non_filename and
check_filename, need correct prefix in order to reconstruct the paths
and check for their existence. With NULL prefix, they just check paths
at top dir instead.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally we err on the safe side: if something can be seen as both an
SHA1 and a pathspec, we stop and scream. In checkout, there is one
exception added in 859fdab (git-checkout: improve error messages, detect
ambiguities. - 2008-07-23), to allow the common case "git checkout
branch". Let's document this exception.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_scissors_line takes a struct strbuf * when a char * would
suffice. Make it take char *.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check_header function contains logic specific to in-body headers,
although it is invoked during both the processing of actual headers and
in-body headers. Separate out the in-body header part into its own
function.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message cleanup.
* ah/misc-message-fixes:
unpack-trees: do not capitalize "working"
git-merge-octopus: do not capitalize "octopus"
git-rebase--interactive: fix English grammar
cat-file: put spaces around pipes in usage string
am: put spaces around pipe in usage string
Update a few tests that used to use GIT_CURL_VERBOSE to use the
newer GIT_TRACE_CURL.
* ep/use-git-trace-curl-in-tests:
t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var
t5550-http-fetch-dumb.sh: use the GIT_TRACE_CURL environment var
test-lib.sh: preserve GIT_TRACE_CURL from the environment
t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var
A test spawned a short-lived background process, which sometimes
prevented the test directory from getting removed at the end of the
script on some platforms.
* js/t6026-clean-up:
t6026-merge-attr: clean up background process at end of test case
"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one. Teach the command
to forbid removal of HEAD.
* jc/forbid-symbolic-ref-d-HEAD:
symbolic-ref -d: do not allow removal of HEAD
Having a submodule whose ".git" repository is somehow corrupt
caused a few commands that recurse into submodules loop forever.
* jc/submodule-anchor-git-dir:
submodule: avoid auto-discovery in prepare_submodule_repo_env()
The test framework left the number of tests and success/failure
count in the t/test-results directory, keyed by the name of the
test script plus the process ID. The latter however turned out not
to serve any useful purpose. The process ID part of the filename
has been removed.
* jk/test-lib-drop-pid-from-results:
test-lib: drop PID from test-results/*.count
"diff-highlight" script (in contrib/) learned to work better with
"git log -p --graph" output.
* bh/diff-highlight-graph:
diff-highlight: avoid highlighting combined diffs
diff-highlight: add multi-byte tests
diff-highlight: ignore test cruft
diff-highlight: add support for --graph output
diff-highlight: add failing test for handling --graph output
diff-highlight: add some tests
Clarify various ways to specify the "revision ranges" in the
documentation.
* po/range-doc:
doc: revisions: sort examples and fix alignment of the unchanged
doc: revisions: show revision expansion in examples
doc: revisions - clarify reachability examples
doc: revisions - define `reachable`
doc: gitrevisions - clarify 'latter case' is revision walk
doc: gitrevisions - use 'reachable' in page description
doc: revisions: single vs multi-parent notation comparison
doc: revisions: extra clarification of <rev>^! notation effects
doc: revisions: give headings for the two and three dot notations
doc: show the actual left, right, and boundary marks
doc: revisions - name the left and right sides
doc: use 'symmetric difference' consistently
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
The ref-store abstraction was introduced to the refs API so that we
can plug in different backends to store references.
* mh/ref-store: (38 commits)
refs: implement iteration over only per-worktree refs
refs: make lock generic
refs: add method to rename refs
refs: add methods to init refs db
refs: make delete_refs() virtual
refs: add method for initial ref transaction commit
refs: add methods for reflog
refs: add method iterator_begin
files_ref_iterator_begin(): take a ref_store argument
split_symref_update(): add a files_ref_store argument
lock_ref_sha1_basic(): add a files_ref_store argument
lock_ref_for_update(): add a files_ref_store argument
commit_ref_update(): add a files_ref_store argument
lock_raw_ref(): add a files_ref_store argument
repack_without_refs(): add a files_ref_store argument
refs: make peel_ref() virtual
refs: make create_symref() virtual
refs: make pack_refs() virtual
refs: make verify_refname_available() virtual
refs: make read_raw_ref() virtual
...
"git am" has been taught to make an internal call to "git apply"'s
innards without spawning the latter as a separate process.
* cc/apply-am: (41 commits)
builtin/am: use apply API in run_apply()
apply: learn to use a different index file
apply: pass apply state to build_fake_ancestor()
apply: refactor `git apply` option parsing
apply: change error_routine when silent
usage: add get_error_routine() and get_warn_routine()
usage: add set_warn_routine()
apply: don't print on stdout in verbosity_silent mode
apply: make it possible to silently apply
apply: use error_errno() where possible
apply: make some parsing functions static again
apply: move libified code from builtin/apply.c to apply.{c,h}
apply: rename and move opt constants to apply.h
builtin/apply: rename option parsing functions
builtin/apply: make create_one_file() return -1 on error
builtin/apply: make try_create_file() return -1 on error
builtin/apply: make write_out_results() return -1 on error
builtin/apply: make write_out_one_result() return -1 on error
builtin/apply: make create_file() return -1 on error
builtin/apply: make add_index_file() return -1 on error
...
Mark messages passed to die() in die_initial_contact().
Update test to reflect changes.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark message commit_utf8_warn for translation.
Update tests to reflect changes.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git blame" and "git annotate" the --compaction-heuristic and
--indent-heuristic options that are now supported by "git diff".
Also teach them to honor the `diff.compactionHeuristic` and
`diff.indentHeuristic` configuration options.
It would be conceivable to introduce separate configuration options for
"blame" and "annotate"; for example `blame.compactionHeuristic` and
`blame.indentHeuristic`. But it would be confusing to users if blame
output is inconsistent with diff output, so it makes more sense for them
to respect the same configuration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new callback function, parse_opt_unknown_cb(), which returns -2 to
indicate that the corresponding option is unknown. This can be used to
add "-h" documentation for an option that will be handled externally to
parse_options().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some groups of added/deleted lines in diffs can be slid up or down,
because lines at the edges of the group are not unique. Picking good
shifts for such groups is not a matter of correctness but definitely has
a big effect on aesthetics. For example, consider the following two
diffs. The first is what standard Git emits:
--- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl
+++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl
@@ -231,6 +231,9 @@ if (!defined $initial_reply_to && $prompting) {
}
if (!$smtp_server) {
+ $smtp_server = $repo->config('sendemail.smtpserver');
+}
+if (!$smtp_server) {
foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) {
if (-x $_) {
$smtp_server = $_;
The following diff is equivalent, but is obviously preferable from an
aesthetic point of view:
--- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl
+++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl
@@ -230,6 +230,9 @@ if (!defined $initial_reply_to && $prompting) {
$initial_reply_to =~ s/(^\s+|\s+$)//g;
}
+if (!$smtp_server) {
+ $smtp_server = $repo->config('sendemail.smtpserver');
+}
if (!$smtp_server) {
foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) {
if (-x $_) {
This patch teaches Git to pick better positions for such "diff sliders"
using heuristics that take the positions of nearby blank lines and the
indentation of nearby lines into account.
The existing Git code basically always shifts such "sliders" as far down
in the file as possible. The only exception is when the slider can be
aligned with a group of changed lines in the other file, in which case
Git favors depicting the change as one add+delete block rather than one
add and a slightly offset delete block. This naive algorithm often
yields ugly diffs.
Commit d634d61ed6 improved the situation somewhat by preferring to
position add/delete groups to make their last line a blank line, when
that is possible. This heuristic does more good than harm, but (1) it
can only help if there are blank lines in the right places, and (2)
always picks the last blank line, even if there are others that might be
better. The end result is that it makes perhaps 1/3 as many errors as
the default Git algorithm, but that still leaves a lot of ugly diffs.
This commit implements a new and much better heuristic for picking
optimal "slider" positions using the following approach: First observe
that each hypothetical positioning of a diff slider introduces two
splits: one between the context lines preceding the group and the first
added/deleted line, and the other between the last added/deleted line
and the first line of context following it. It tries to find the
positioning that creates the least bad splits.
Splits are evaluated based only on the presence and locations of nearby
blank lines, and the indentation of lines near the split. Basically, it
prefers to introduce splits adjacent to blank lines, between lines that
are indented less, and between lines with the same level of indentation.
In more detail:
1. It measures the following characteristics of a proposed splitting
position in a `struct split_measurement`:
* the number of blank lines above the proposed split
* whether the line directly after the split is blank
* the number of blank lines following that line
* the indentation of the nearest non-blank line above the split
* the indentation of the line directly below the split
* the indentation of the nearest non-blank line after that line
2. It combines the measured attributes using a bunch of
empirically-optimized weighting factors to derive a `struct
split_score` that measures the "badness" of splitting the text at
that position.
3. It combines the `split_score` for the top and the bottom of the
slider at each of its possible positions, and selects the position
that has the best `split_score`.
I determined the initial set of weighting factors by collecting a corpus
of Git histories from 29 open-source software projects in various
programming languages. I generated many diffs from this corpus, and
determined the best positioning "by eye" for about 6600 diff sliders. I
used about half of the repositories in the corpus (corresponding to
about 2/3 of the sliders) as a training set, and optimized the weights
against this corpus using a crude automated search of the parameter
space to get the best agreement with the manually-determined values.
Then I tested the resulting heuristic against the full corpus. The
results are summarized in the following table, in column `indent-1`:
| repository | count | Git 2.9.0 | compaction | compaction-fixed | indent-1 | indent-2 |
| --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- |
| afnetworking | 109 | 89 (81.7%) | 37 (33.9%) | 37 (33.9%) | 2 (1.8%) | 2 (1.8%) |
| alamofire | 30 | 18 (60.0%) | 14 (46.7%) | 15 (50.0%) | 0 (0.0%) | 0 (0.0%) |
| angular | 184 | 127 (69.0%) | 39 (21.2%) | 23 (12.5%) | 5 (2.7%) | 5 (2.7%) |
| animate | 313 | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) |
| ant | 380 | 356 (93.7%) | 152 (40.0%) | 148 (38.9%) | 15 (3.9%) | 15 (3.9%) | *
| bugzilla | 306 | 263 (85.9%) | 109 (35.6%) | 99 (32.4%) | 14 (4.6%) | 15 (4.9%) | *
| corefx | 126 | 91 (72.2%) | 22 (17.5%) | 21 (16.7%) | 6 (4.8%) | 6 (4.8%) |
| couchdb | 78 | 44 (56.4%) | 26 (33.3%) | 28 (35.9%) | 6 (7.7%) | 6 (7.7%) | *
| cpython | 937 | 158 (16.9%) | 50 (5.3%) | 49 (5.2%) | 5 (0.5%) | 5 (0.5%) | *
| discourse | 160 | 95 (59.4%) | 42 (26.2%) | 36 (22.5%) | 18 (11.2%) | 13 (8.1%) |
| docker | 307 | 194 (63.2%) | 198 (64.5%) | 253 (82.4%) | 8 (2.6%) | 8 (2.6%) | *
| electron | 163 | 132 (81.0%) | 38 (23.3%) | 39 (23.9%) | 6 (3.7%) | 6 (3.7%) |
| git | 536 | 470 (87.7%) | 73 (13.6%) | 78 (14.6%) | 16 (3.0%) | 16 (3.0%) | *
| gitflow | 127 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) |
| ionic | 133 | 89 (66.9%) | 29 (21.8%) | 38 (28.6%) | 1 (0.8%) | 1 (0.8%) |
| ipython | 482 | 362 (75.1%) | 167 (34.6%) | 169 (35.1%) | 11 (2.3%) | 11 (2.3%) | *
| junit | 161 | 147 (91.3%) | 67 (41.6%) | 66 (41.0%) | 1 (0.6%) | 1 (0.6%) | *
| lighttable | 15 | 5 (33.3%) | 0 (0.0%) | 2 (13.3%) | 0 (0.0%) | 0 (0.0%) |
| magit | 88 | 75 (85.2%) | 11 (12.5%) | 9 (10.2%) | 1 (1.1%) | 0 (0.0%) |
| neural-style | 28 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) |
| nodejs | 781 | 649 (83.1%) | 118 (15.1%) | 111 (14.2%) | 4 (0.5%) | 5 (0.6%) | *
| phpmyadmin | 491 | 481 (98.0%) | 75 (15.3%) | 48 (9.8%) | 2 (0.4%) | 2 (0.4%) | *
| react-native | 168 | 130 (77.4%) | 79 (47.0%) | 81 (48.2%) | 0 (0.0%) | 0 (0.0%) |
| rust | 171 | 128 (74.9%) | 30 (17.5%) | 27 (15.8%) | 16 (9.4%) | 14 (8.2%) |
| spark | 186 | 149 (80.1%) | 52 (28.0%) | 52 (28.0%) | 2 (1.1%) | 2 (1.1%) |
| tensorflow | 115 | 66 (57.4%) | 48 (41.7%) | 48 (41.7%) | 5 (4.3%) | 5 (4.3%) |
| test-more | 19 | 15 (78.9%) | 2 (10.5%) | 2 (10.5%) | 1 (5.3%) | 1 (5.3%) | *
| test-unit | 51 | 34 (66.7%) | 14 (27.5%) | 8 (15.7%) | 2 (3.9%) | 2 (3.9%) | *
| xmonad | 23 | 22 (95.7%) | 2 (8.7%) | 2 (8.7%) | 1 (4.3%) | 1 (4.3%) | *
| --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- |
| totals | 6668 | 4391 (65.9%) | 1496 (22.4%) | 1491 (22.4%) | 150 (2.2%) | 144 (2.2%) |
| totals (training set) | 4552 | 3195 (70.2%) | 1053 (23.1%) | 1061 (23.3%) | 86 (1.9%) | 88 (1.9%) |
| totals (test set) | 2116 | 1196 (56.5%) | 443 (20.9%) | 430 (20.3%) | 64 (3.0%) | 56 (2.6%) |
In this table, the numbers are the count and percentage of human-rated
sliders that the corresponding algorithm got *wrong*. The columns are
* "repository" - the name of the repository used. I used the diffs
between successive non-merge commits on the HEAD branch of the
corresponding repository.
* "count" - the number of sliders that were human-rated. I chose most,
but not all, sliders to rate from those among which the various
algorithms gave different answers.
* "Git 2.9.0" - the default algorithm used by `git diff` in Git 2.9.0.
* "compaction" - the heuristic used by `git diff --compaction-heuristic`
in Git 2.9.0.
* "compaction-fixed" - the heuristic used by `git diff
--compaction-heuristic` after the fixes from earlier in this patch
series. Note that the results are not dramatically different than
those for "compaction". Both produce non-ideal diffs only about 1/3 as
often as the default `git diff`.
* "indent-1" - the new `--indent-heuristic` algorithm, using the first
set of weighting factors, determined as described above.
* "indent-2" - the new `--indent-heuristic` algorithm, using the final
set of weighting factors, determined as described below.
* `*` - indicates that repo was part of training set used to determine
the first set of weighting factors.
The fact that the heuristic performed nearly as well on the test set as
on the training set in column "indent-1" is a good indication that the
heuristic was not over-trained. Given that fact, I ran a second round of
optimization, using the entire corpus as the training set. The resulting
set of weights gave the results in column "indent-2". These are the
weights included in this patch.
The final result gives consistently and significantly better results
across the whole corpus than either `git diff` or `git diff
--compaction-heuristic`. It makes only about 1/30 as many errors as the
former and about 1/10 as many errors as the latter. (And a good fraction
of the remaining errors are for diffs that involve weirdly-formatted
code, sometimes apparently machine-generated.)
The tools that were used to do this optimization and analysis, along
with the human-generated data values, are recorded in a separate project
[1].
This patch adds a new command-line option `--indent-heuristic`, and a
new configuration setting `diff.indentHeuristic`, that activate this
heuristic. This interface is only meant for testing purposes, and should
be finalized before including this change in any release.
[1] https://github.com/mhagger/diff-slider-tools
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4c7f181 (make color.ui default to 'auto', 2013-06-10), the
default for color.* when nothing is set is 'auto' and we still claimed
that the default was 'false'. Be more precise by saying explicitly
that the default is to follow color.ui, and recall that the default is
'auto' to avoid one indirection for the reader.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit-tree" stopped reading commit.gpgsign configuration
variable that was meant for Porcelain "git commit" in Git 2.9; we
forgot to update "git gui" to look at the configuration to match
this change.
* js/git-gui-commit-gpgsign:
git-gui: respect commit.gpgsign again
Lifts calls to exit(2) and die() higher in the callchain in
sequencer.c files so that more helper functions in it can be used
by callers that want to handle error conditions themselves.
* js/sequencer-wo-die:
sequencer: ensure to release the lock when we could not read the index
sequencer: lib'ify checkout_fast_forward()
sequencer: lib'ify fast_forward_to()
sequencer: lib'ify save_opts()
sequencer: lib'ify save_todo()
sequencer: lib'ify save_head()
sequencer: lib'ify create_seq_dir()
sequencer: lib'ify read_populate_opts()
sequencer: lib'ify read_populate_todo()
sequencer: lib'ify read_and_refresh_cache()
sequencer: lib'ify prepare_revs()
sequencer: lib'ify walk_revs_populate_todo()
sequencer: lib'ify do_pick_commit()
sequencer: lib'ify do_recursive_merge()
sequencer: lib'ify write_message()
sequencer: do not die() in do_pick_commit()
sequencer: lib'ify sequencer_pick_revisions()
"git fetch http::/site/path" did not die correctly and segfaulted
instead.
* jk/fix-remote-curl-url-wo-proto:
remote-curl: handle URLs without protocol
Message cleanup.
* ah/misc-message-fixes:
unpack-trees: do not capitalize "working"
git-merge-octopus: do not capitalize "octopus"
git-rebase--interactive: fix English grammar
cat-file: put spaces around pipes in usage string
am: put spaces around pipe in usage string
Update Japanese translation for "git-gui".
* sy/git-gui-i18n-ja:
git-gui: update Japanese information
git-gui: update Japanese translation
git-gui: add Japanese language code
git-gui: apply po template to Japanese translation
git-gui: consistently use the same word for "blame" in Japanese
git-gui: consistently use the same word for "remote" in Japanese
"git pack-objects --include-tag" was taught that when we know that
we are sending an object C, we want a tag B that directly points at
C but also a tag A that points at the tag B. We used to miss the
intermediate tag B in some cases.
* jk/pack-tag-of-tag:
pack-objects: walk tag chains for --include-tag
t5305: simplify packname handling
t5305: use "git -C"
t5305: drop "dry-run" of unpack-objects
t5305: move cleanup into test block
Otherwise for people who use autotools-based configure in main worktree,
the performance testing results will be inconsistent as work and build
trees could be using e.g. different optimization levels.
See e.g.
http://public-inbox.org/git/20160818175222.bmm3ivjheokf2qzl@sigill.intra.peff.net/
for example.
NOTE config.status has to be copied because otherwise without it the build
would want to run reconfigure this way loosing just copied config.mak.autogen.
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
