spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of a range-diff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert a range-diff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --range-diff=<refspec>" to insert a
range-diff into the commentary section of a lone patch rather than
requiring a cover letter.
Implementation note: Generating a range-diff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the range-diff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of an interdiff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert an interdiff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --interdiff=<prev>" to insert an
interdiff into the commentary section of a lone patch rather than
requiring a cover letter. The interdiff is indented to avoid confusing
git-am and human readers into considering it part of the patch proper.
Implementation note: Generating an interdiff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the interdiff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In patches generated by git-format-patch, the area below the "---" line
following the commit message and before the actual 'diff' can be used
for commentary which the patch author wants to convey to readers of the
patch itself but not include in the commit message proper.
By default, the commentary area is empty, however, the --notes option
causes it to be populated with notes associated with the commit. In the
future, other options may be added which also insert content into the
commentary section.
To accommodate this, factor out the logic which delimits commentary
blocks from the commit message so that it can be re-used for upcoming
optional inserted content.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a repository argument to allow the callers of parse_tag_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
Avoid unchecked snprintf() to make future code auditing easier.
* jk/snprintf-truncation:
fmt_with_err: add a comment that truncation is OK
shorten_unambiguous_ref: use xsnprintf
fsmonitor: use internal argv_array of struct child_process
log_write_email_headers: use strbufs
http: use strbufs instead of fixed buffers
Commit 76f5df305b (log: decorate grafted commits with "grafted" -
2011-08-18) lets us decorate grafted commits but I forgot about the
color.decorate.* config.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.
This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard coding the name-to-id mapping in C code, keep it in an
array and use a common function to do the parsing. This reduces code
and also allows us to list all possible color slots later.
This starts using C99 designated initializers more for convenience
(the first designated initializers have been introduced in builtin/clean.c
for some time without complaints)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --cover --attach" created a broken MIME multipart
message for the cover letter, which has been fixed by keeping the
cover letter as plain text file.
* bc/format-patch-cover-no-attach:
format-patch: make cover letters always text/plain
The functionality of "$GIT_DIR/info/grafts" has been superseded by
the "refs/replace/" mechanism for some time now, but the internal
code had support for it in many places, which has been cleaned up
in order to drop support of the "grafts" mechanism.
* js/deprecate-grafts:
Remove obsolete script to convert grafts to replace refs
technical/shallow: describe why shallow cannot use replace refs
technical/shallow: stop referring to grafts
filter-branch: stop suggesting to use grafts
Deprecate support for .git/info/grafts
Add a test for `git replace --convert-graft-file`
replace: introduce --convert-graft-file
replace: prepare create_graft() for converting graft files wholesale
replace: "libify" create_graft() and callees
replace: avoid using die() to indicate a bug
commit: Let the callback of for_each_mergetag return on error
argv_array: offer to split a string by whitespace
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
Instead of relying on commit->util to store the source string, let the
user provide a commit-slab to store the source strings in.
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we write a MIME attachment, we write the mime headers
into fixed-size buffers. These are likely to be big enough
in practice, but technically the input could be arbitrarily
large (e.g., if the caller provided a lot of content in the
extra_headers string), in which case we'd quietly truncate
it and generate bogus output. Let's convert these buffers to
strbufs.
The memory ownership here is a bit funny. The original fixed
buffers were static, and we merely pass out pointers to them
to be used by the caller (and in one case, we even just
stuff our value into the opt->diffopt.stat_sep value).
Ideally we'd actually pass back heap buffers, and the caller
would be responsible for freeing them.
This patch punts on that cleanup for now, and instead just
marks the strbufs as static. That means we keep ownership in
this function, making it not a complete leak. This also
takes us one step closer to fixing it in the long term
(since we can eventually use strbuf_detach() to hand
ownership to the caller, once it's ready).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting a series of patches using --attach and --cover-letter,
the cover letter lacks the closing MIME boundary, violating RFC 2046.
Certain clients, such as Thunderbird, discard the message body in such a
case.
Since the cover letter is just one part and sending it as
multipart/mixed is not very useful, always emit it as text/plain,
avoiding the boundary problem altogether.
Reported-by: Patrick Hemmer <git@stormcloud9.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is yet another patch to be filed under the keyword "libification".
There is one subtle change in behavior here, where a `git log` that has
been asked to show the mergetags would now stop reporting the mergetags
upon the first failure, whereas previously, it would have continued to the
next mergetag, if any.
In practice, that change should not matter, as it is 1) uncommon to
perform octopus merges using multiple tags as merge heads, and 2) when the
user asks to be shown those tags, they really should be there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--show-all" revision option shows UNINTERESTING
commits. Some of these commits may be unparsed when we try
to show them (since we may or may not need to walk their
parents to fulfill the request).
Commit 3131b71301 (Add "--show-all" revision walker flag for
debugging, 2008-02-09) resolved this by just skipping
pretty-printing for commits without their object contents
cached, saying:
Because we now end up listing commits we may not even have been parsed
at all "show_log" and "show_commit" need to protect against commits
that don't have a commit buffer entry.
That was the easy fix to avoid the pretty-printer segfaulting,
but:
1. It doesn't work for all formats. E.g., --oneline
prints the oid for each such commit but not a trailing
newline, leading to jumbled output.
2. It only affects some commits, depending on whether we
happened to parse them or not (so if they were at the
tip of an UNINTERESTING starting point, or if we
happened to traverse over them, you'd see more data).
3. It unncessarily ties the decision to show the verbose
header to whether the commit buffer was cached. That
makes it harder to change the logic around caching
(e.g., if we could traverse without actually loading
the full commit objects).
These days it's safe to feed such a commit to the
pretty-print code. Since be5c9fb904 (logmsg_reencode: lazily
load missing commit buffers, 2013-01-26), we'll load it on
demand in such a case. So let's just always show the verbose
headers.
This does change the behavior of plumbing, but:
a. The --show-all option was explicitly introduced as a
debugging aid, and was never documented (and has rarely
even been mentioned on the list by git devs).
b. Avoiding the commits was already not deterministic due
to (2) above. So the caller might have seen full
headers for these commits anyway, and would need to be
prepared for it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of hash_sha1_file to use
struct object_id and adjust all function calls.
Rename this function to hash_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The resolve_ref_unsafe() function may return NULL even with
a REF_ISSYMREF flag if a symref points to a broken ref. As a
result, it's possible for the decoration code's "is this
branch the current HEAD" check to segfault when it passes
the NULL to starts_with().
This is unlikely in practice, since we can only reach this
code if we already resolved HEAD to a matching sha1 earlier.
But it's possible if HEAD racily becomes broken, or if
there's a transient filesystem error.
We can fix this by returning early in the broken case, since
NULL could not possibly match any of our branch names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to get rid of some write-only variables, among them seven
SHA1 buffers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Junio C Hamano
Jeff King
Eric Sunshine
brian m. carlson
Stefan Beller
Nguyễn Thái Ngọc Duy
Johannes Schindelin
Derrick Stolee
Brandon Williams
Patryk Obara
Rafael Ascensão
René Scharfe