When deleting/pruning references, remove any directories that are made
empty by the deletion of loose references or of reflogs. Otherwise such
empty directories can survive forever and accumulate over time. (Even
'pack-refs', which is smart enough to remove the parent directories of
loose references that it prunes, leaves directories that were already
empty.)
And now that files_transaction_commit() takes care of deleting the
parent directories of loose references that it prunes, we don't have to
do that in prune_ref() anymore.
This change would be unwise if the *creation* of these directories could
race with our deletion of them. But the earlier changes in this patch
series made the creation paths robust against races, so now it is safe
to tidy them up more aggressively.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "flags" parameter that tells the function whether to remove
empty parent directories of the loose reference file, of the reflog
file, or both. The new functionality is not yet used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's bad manners and surprising and therefore error-prone.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the standard nomenclature.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was hardly doing anything anymore, and had only one caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is simpler to derive the path to the file that must be deleted from
"lock->ref_name" than from the lock_file object.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now files_log_ref_write() doesn't do anything beyond call
log_ref_write_1(), so inline the latter into the former.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing the name of the reflog file into a strbuf that is
supplied by the caller but not needed there, write it into a local
temporary buffer and remove the strbuf parameter entirely.
And while we're adjusting the function signature, reorder the arguments
to move the input parameters before the output parameters.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unnecessary to pass a strbuf holding the reflog path up and down
the call stack now that it is hardly needed by the callers. Remove the
places where log_ref_write_1() uses it, in preparation for making it
internal to log_ref_setup().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will most often be called by log_ref_write_1(), which
wants to append to the reflog file. In that case, it is silly to close
the file only for the caller to reopen it immediately. So, in the case
that the file was opened, pass the open file descriptor back to the
caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change log_ref_setup() to use raceproof_create_file() to create the new
logfile. This makes it more robust against a race against another
process that might be trying to clean up empty directories while we are
trying to create a new logfile.
This also means that it will only call create_leading_directories() if
open() fails, which should be a net win. Even in the cases where we are
willing to create a new logfile, it will usually be the case that the
logfile already exists, or if not then that the directory containing the
logfile already exists. In such cases, we will save some work that was
previously done unconditionally.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of this function (especially how it handles errors) is
quite different depending on whether we are willing to create the reflog
vs. whether we are only trying to open an existing reflog. So separate
the code paths.
This also simplifies the next steps.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function doesn't do anything beyond call files_log_ref_write(), so
replace it with the latter at its call sites.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Don't capitalize error strings
* Report true paths of affected files
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides shortening the code, this saves an unnecessary call to
safe_create_leading_directories_const() in almost all cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of coding the retry loop inline, use raceproof_create_file() to
make lock acquisition safe against directory creation/deletion races.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`lflags` is set a single time then never changed, so just inline it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of refname_is_safe() was changed in
e40f355 "refname_is_safe(): insist that the refname already be normalized", 2016-04-27
without a corresponding update to its docstring. The function is in fact
stricter than documented, because it now insists that the result of
normalizing the part of a refname following "refs/" is identical to that
part of the original refname. Fix the docstring.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stray symbolic link in $GIT_DIR/refs/ directory could make name
resolution loop forever, which has been corrected.
* jk/ref-symlink-loop:
files_read_raw_ref: prevent infinite retry loops in general
files_read_raw_ref: avoid infinite loop on broken symlinks
Limit the number of retries to 3. That should be adequate to
prevent any races, while preventing the possibility of
infinite loops if the logic fails to handle any other
possible error modes correctly.
After the fix in the previous commit, there's no known way
to trigger an infinite loop, but I did manually verify that
this fixes the test in that commit even when the code change
is not applied.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our ref resolution first runs lstat() on any path we try to
look up, because we want to treat symlinks specially (by
resolving them manually and considering them symrefs). But
if the results of `readlink` do _not_ look like a ref, we
fall through to treating it like a normal file, and just
read the contents of the linked path.
Since fcb7c76 (resolve_ref_unsafe(): close race condition
reading loose refs, 2013-06-19), that "normal file" code
path will stat() the file and if we see ENOENT, will jump
back to the lstat(), thinking we've seen inconsistent
results between the two calls. But for a symbolic ref, this
isn't a race: the lstat() found the symlink, and the stat()
is looking at the path it points to. We end up in an
infinite loop calling lstat() and stat().
We can fix this by avoiding the retry-on-inconsistent jump
when we know that we found a symlink. While we're at it,
let's add a comment explaining why the symlink case gets to
this code in the first place; without that, it is not
obvious that the correct solution isn't to avoid the stat()
code path entirely.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-store abstraction was introduced to the refs API so that we
can plug in different backends to store references.
* mh/ref-store: (38 commits)
refs: implement iteration over only per-worktree refs
refs: make lock generic
refs: add method to rename refs
refs: add methods to init refs db
refs: make delete_refs() virtual
refs: add method for initial ref transaction commit
refs: add methods for reflog
refs: add method iterator_begin
files_ref_iterator_begin(): take a ref_store argument
split_symref_update(): add a files_ref_store argument
lock_ref_sha1_basic(): add a files_ref_store argument
lock_ref_for_update(): add a files_ref_store argument
commit_ref_update(): add a files_ref_store argument
lock_raw_ref(): add a files_ref_store argument
repack_without_refs(): add a files_ref_store argument
refs: make peel_ref() virtual
refs: make create_symref() virtual
refs: make pack_refs() virtual
refs: make verify_refname_available() virtual
refs: make read_raw_ref() virtual
...
Alternate refs backends might still use files to store per-worktree
refs. So provide a way to iterate over only the per-worktree references
in a ref_store. The other backend can set up a files ref_store and
iterate using the new DO_FOR_EACH_PER_WORKTREE_ONLY flag when iterating.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of including a files-backend-specific struct ref_lock, change
the generic ref_update struct to include a void pointer that backends
can use for their own arbitrary data.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the last caller of function get_files_ref_store(), so
remove it.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternate refs backends might not need the refs/heads directory and so
on, so we make ref db initialization part of the backend.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the file-based backend, delete_refs has some special optimization
to deal with packed refs. In other backends, we might be able to make
ref deletion faster by putting all deletions into a single
transaction. So we need a special backend function for this.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ronnie Sahlberg <rsahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the file-based backend, the reflog piggybacks on the ref lock.
Since other backends won't have the same sort of ref lock, ref backends
must also handle reflogs.
Signed-off-by: Ronnie Sahlberg <rsahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now it only supports the main reference store.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reference backends will be able to customize this function to implement
reference reading.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref_recursively() can handle references in arbitrary files
reference stores, so use it to resolve "gitlink" (i.e., submodule)
references. Aside from removing redundant code, this allows submodule
lookups to benefit from the much more robust code that we use for
reading non-submodule references. And, since the code is now agnostic
about reference backends, it will work for any future references
backend (so move its definition to refs.c).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that resolve_packed_ref() can work with an arbitrary
files_ref_store, there is no need to have a separate
resolve_gitlink_packed_ref() function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move resolve_gitlink_ref() and related functions lower in the file to
avoid the need for forward declarations in the next step.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
