"git stash" has kept an escape hatch to use the scripted version
for a few releases, which got stale. It has been removed.
* tg/retire-scripted-stash:
stash: remove the stash.useBuiltin setting
stash: get git_stash_config at the top level
Revamping of the advise API to allow more systematic enumeration of
advice knobs in the future.
* hw/advise-ng:
tag: use new advice API to check visibility
advice: revamp advise API
advice: change "setupStreamFailure" to "setUpstreamFailure"
advice: extract vadvise() from advise()
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently it's very easy for the advice library's callers to miss
checking the visibility step before printing an advice. Also, it makes
more sense for this step to be handled by the advice library.
Add a new advise_if_enabled function that checks the visibility of
advice messages before printing.
Add a new helper advise_enabled to check the visibility of the advice
if the caller needs to carry out complicated processing based on that
value.
A list of advice_settings is added to cache the config variables names
and values, it's intended to replace advice_config[] and the global
variables once we migrate all the callers to use the new APIs.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around test breakages caused by custom regex engine used in
libasan, when address sanitizer is used with more recent versions
of gcc and clang.
* jk/asan-build-fix:
Makefile: use compat regex with SANITIZE=address
Recent versions of the gcc and clang Address Sanitizer produce test
failures related to regexec(). This triggers with gcc-10 and clang-8
(but not gcc-9 nor clang-7). Running:
make CC=gcc-10 SANITIZE=address test
results in failures in t4018, t3206, and t4062.
The cause seems to be that when built with ASan, we use a different
version of regexec() than normal. And this version doesn't understand
the REG_STARTEND flag. Here's my evidence supporting that.
The failure in t4062 is an ASan warning:
expecting success of 4062.2 '-G matches':
git diff --name-only -G "^(0{64}){64}$" HEAD^ >out &&
test 4096-zeroes.txt = "$(cat out)"
=================================================================
==672994==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7fa76f672000 at pc 0x7fa7726f75b6 bp 0x7ffe41bdda70 sp 0x7ffe41bdd220
READ of size 4097 at 0x7fa76f672000 thread T0
#0 0x7fa7726f75b5 (/lib/x86_64-linux-gnu/libasan.so.6+0x4f5b5)
#1 0x562ae0c9c40e in regexec_buf /home/peff/compile/git/git-compat-util.h:1117
#2 0x562ae0c9c40e in diff_grep /home/peff/compile/git/diffcore-pickaxe.c:52
#3 0x562ae0c9cc28 in pickaxe_match /home/peff/compile/git/diffcore-pickaxe.c:166
[...]
In this case we're looking in a buffer which was mmap'd via
reuse_worktree_file(), and whose size is 4096 bytes. But libasan's
regex tries to look at byte 4097 anyway! If we tweak Git like this:
diff --git a/diff.c b/diff.c
index 8e2914c031..cfae60c120 100644
--- a/diff.c
+++ b/diff.c
@@ -3880,7 +3880,7 @@ static int reuse_worktree_file(struct index_state *istate,
*/
if (ce_uptodate(ce) ||
(!lstat(name, &st) && !ie_match_stat(istate, ce, &st, 0)))
- return 1;
+ return 0;
return 0;
}
to use a regular buffer (with a trailing NUL) instead of an mmap, then
the complaint goes away.
The other failures are actually diff output with an incorrect funcname
header. If I instrument xdiff to show the funcname matching like so:
diff --git a/xdiff-interface.c b/xdiff-interface.c
index 8509f9ea22..f6c3dc1986 100644
--- a/xdiff-interface.c
+++ b/xdiff-interface.c
@@ -197,6 +197,7 @@ struct ff_regs {
struct ff_reg {
regex_t re;
int negate;
+ char *printable;
} *array;
};
@@ -218,7 +219,12 @@ static long ff_regexp(const char *line, long len,
for (i = 0; i < regs->nr; i++) {
struct ff_reg *reg = regs->array + i;
- if (!regexec_buf(®->re, line, len, 2, pmatch, 0)) {
+ int ret = regexec_buf(®->re, line, len, 2, pmatch, 0);
+ warning("regexec %s:\n regex: %s\n buf: %.*s",
+ ret == 0 ? "matched" : "did not match",
+ reg->printable,
+ (int)len, line);
+ if (!ret) {
if (reg->negate)
return -1;
break;
@@ -264,6 +270,7 @@ void xdiff_set_find_func(xdemitconf_t *xecfg, const char *value, int cflags)
expression = value;
if (regcomp(®->re, expression, cflags))
die("Invalid regexp to look for hunk header: %s", expression);
+ reg->printable = xstrdup(expression);
free(buffer);
value = ep + 1;
}
then when compiling with ASan and gcc-10, running the diff from t4018.66
produces this:
$ git diff -U1 cpp-skip-access-specifiers
warning: regexec did not match:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: private:
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ private:
void DoSomething();
int ChangeMe;
};
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
That first regex should match (and is negated, so it should be telling
us _not_ to match "private:"). But it wouldn't if regexec() is looking
at the whole buffer, and not just the length-limited line we've fed to
regexec_buf(). So this is consistent again with REG_STARTEND being
ignored.
The correct output (compiling without ASan, or gcc-9 with Asan) looks
like this:
warning: regexec matched:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
[...more lines that we end up not using...]
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: class RIGHT : public Baseclass
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ class RIGHT : public Baseclass
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
So it really does seem like libasan's regex engine is ignoring
REG_STARTEND. We should be able to work around it by compiling with
NO_REGEX, which would use our local regexec(). But to make matters even
more interesting, this isn't enough by itself.
Because ASan has support from the compiler, it doesn't seem to intercept
our call to regexec() at the dynamic library level. It actually
recognizes when we are compiling a call to regexec() and replaces it
with ASan-specific code at that point. And unlike most of our other
compat code, where we might have git_mmap() or similar, the actual
symbol name in the compiled compat/regex code is regexec(). So just
compiling with NO_REGEX isn't enough; we still end up in libasan!
We can work around that by having the preprocessor replace regexec with
git_regexec (both in the callers and in the actual implementation), and
we truly end up with a call to our custom regex code, even when
compiling with ASan. That's probably a good thing to do anyway, as it
means anybody looking at the symbols later (e.g., in a debugger) would
have a better indication of which function is which. So we'll do the
same for the other common regex functions (even though just regexec() is
enough to fix this ASan problem).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, `parse_pathspec_file()` was tested indirectly by invoking
git commands with properly crafted inputs. As demonstrated by the
previous bugfix, testing complicated black boxes indirectly can lead to
tests that silently test the wrong thing.
Introduce direct tests for `parse_pathspec_file()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effort to move "git-add--interactive" to C continues.
* js/add-p-in-c:
built-in add -p: show helpful hint when nothing can be staged
built-in add -p: only show the applicable parts of the help text
built-in add -p: implement the 'q' ("quit") command
built-in add -p: implement the '/' ("search regex") command
built-in add -p: implement the 'g' ("goto") command
built-in add -p: implement hunk editing
strbuf: add a helper function to call the editor "on an strbuf"
built-in add -p: coalesce hunks after splitting them
built-in add -p: implement the hunk splitting feature
built-in add -p: show different prompts for mode changes and deletions
built-in app -p: allow selecting a mode change as a "hunk"
built-in add -p: handle deleted empty files
built-in add -p: support multi-file diffs
built-in add -p: offer a helpful error message when hunk navigation failed
built-in add -p: color the prompt and the help text
built-in add -p: adjust hunk headers as needed
built-in add -p: show colored hunks by default
built-in add -i: wire up the new C code for the `patch` command
built-in add -i: start implementing the `patch` functionality in C
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ebb7baf0 ("Makefile: add a hdr-check target", 2018-09-19)
implemented hdr-check target, it wanted to leave some header files
exempt from the stricter check the target implements, and added
GEN_HDRS macro.
This however is probably a bad move for two reasons:
- If we value the header cleanliness check, we eventually want to
teach our header generating scripts to produce clean headers.
Keeping the blanket "generated headers can be left as dirty as we
want" exception does not nudge us in the right direction.
- There is a list of generated header files, GENERATED_H, which is
used to keep track of dependencies. Presence of GEN_HDRS that is
too similarly named would confuse developers who are adding new
generated header files which list to add theirs.
- Even though unicode-width.h could be generated using a contrib/
script, as far as our build infrastructure is concerned, it is a
source file that is tracked in the source control system. Its
presence in GEN_HDRS list is doubly misleading.
Get rid of GEN_HDRS, which is used only once to list the headers we
do not run hdr-check test on, and instead explicitly list that the
ones, either tracked or generated, that we exempt from the test.
This allows GENERATED_H to be the sole "here are build artifact
header files that are expendable" list, so use it in the clean
target to $(RM) them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous steps, we re-implemented the main loop of `git add -i`
in C, and most of the commands.
Notably, we left out the actual functionality of `patch`, as the
relevant code makes up more than half of `git-add--interactive.perl`,
and is actually pretty independent of the rest of the commands.
With this commit, we start to tackle that `patch` part. For better
separation of concerns, we keep the code in a separate file,
`add-patch.c`. The new code is still guarded behind the
`add.interactive.useBuiltin` config setting, and for the moment,
it can only be called via `git add -p`.
The actual functionality follows the original implementation of
5cde71d64a (git-add --interactive, 2006-12-10), but not too closely
(for example, we use string offsets rather than copying strings around,
and after seeing whether the `k` and `j` commands are applicable, in the
C version we remember which previous/next hunk was undecided, and use it
rather than looking again when the user asked to jump).
As a further deviation from that commit, We also use a comma instead of
a slash to separate the available commands in the prompt, as the current
version of the Perl script does this, and we also add a line about the
question mark ("print help") to the help text.
While it is tempting to use this conversion of `git add -p` as an excuse
to work on `apply_all_patches()` so that it does _not_ want to read a
file from `stdin` or from a file, but accepts, say, an `strbuf` instead,
we will refrain from this particular rabbit hole at this stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI updates.
* js/azure-pipelines-msvc:
ci: also build and test with MS Visual Studio on Azure Pipelines
ci: really use shallow clones on Azure Pipelines
tests: let --immediate and --write-junit-xml play well together
test-tool run-command: learn to run (parts of) the testsuite
vcxproj: include more generated files
vcxproj: only copy `git-remote-http.exe` once it was built
msvc: work around a bug in GetEnvironmentVariable()
msvc: handle DEVELOPER=1
msvc: ignore some libraries when linking
compat/win32/path-utils.h: add #include guards
winansi: use FLEX_ARRAY to avoid compiler warning
msvc: avoid using minus operator on unsigned types
push: do not pretend to return `int` from `die_push_simple()`
When the %.cocci.patch target was defined in 63f0a758a0 (add coccicheck
make target, 2016-09-15), it included a mechanism to suppress the noisy
output, similar to the $(QUIET_<x>) family of variables.
In the case where one wants to inspect the output hidden by
$(QUIET_<x>), one could define $(V) for verbose output. In the
%.cocci.patch target, this was not implemented.
Move the output suppression into the $(QUIET_SPATCH) variable which is
used like the other $(QUIET_<x>) variables. While we're at it, change
the number of spaces printed from 5 to 4, like the other variables
there.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rename detection logic sorts a list of rename source candidates
by similarity to pick the best candidate, which means that a tie
between sources with the same similarity is broken by the original
location in the original candidate list (which is sorted by path).
Force the sorting by similarity done with a stable sort, which is
not promised by system supplied qsort(3), to ensure consistent
results across platforms.
* js/diff-rename-force-stable-sort:
diffcore_rename(): use a stable sort
Move git_sort(), a stable sort, into into libgit.a
Dev support.
* dl/honor-cflags-in-hdr-check:
ci: run `hdr-check` as part of the `Static Analysis` job
Makefile: emulate compile in $(HCO) target better
pack-bitmap.h: remove magic number
promisor-remote.h: include missing header
apply.h: include missing header
Coccinelle checks are done on more source files than before now.
* dl/cocci-everywhere:
Makefile: run coccicheck on more source files
Makefile: strip leading ./ in $(FIND_SOURCE_FILES)
Makefile: define THIRD_PARTY_SOURCES
Makefile: strip leading ./ in $(LIB_H)
... because we can, now. Technically, we actually build using `MSBuild`,
which is however pretty close to building interactively in Visual
Studio.
As there is no convenient way to run Git's test suite in Visual Studio,
we unpack a Portable Git to run it, using the just-added test helper to
allow running test scripts in parallel.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `qsort()` function is not guaranteed to be stable, i.e. it does not
promise to maintain the order of items it is told to consider equal. In
contrast, the `git_sort()` function we carry in `compat/qsort.c` _is_
stable, by virtue of implementing a merge sort algorithm.
In preparation for using a stable sort in Git's rename detection, move
the stable sort into `libgit.a` so that it is compiled in
unconditionally, and rename it to `git_stable_qsort()`.
Note: this also makes the hack obsolete that was introduced in
fe21c6b285 (mingw: reencode environment variables on the fly (UTF-16
<-> UTF-8), 2018-10-30), where we included `compat/qsort.c` directly in
`compat/mingw.c` to use the stable sort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when testing headers using `make hdr-check`, headers are
directly compiled. Although this seems to test the headers, this is too
strict since we treat the headers as C sources. As a result, this will
cause warnings to appear that would otherwise not, such as a static
variable definition intended for later use throwing a unused variable
warning.
In addition, on platforms that can run `make hdr-check` but require
custom flags, this target was failing because none of them were being
passed to the compiler. For example, on MacOS, the NO_OPENSSL flag was
being set but it was not being passed into compiler so the check was
failing.
Fix these problems by emulating the compile process better, including
test compiling dummy *.hcc C sources generated from the *.h files and
passing $(ALL_CFLAGS) into the compiler for the $(HCO) target so that
these custom flags can be used.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Before, when running the "coccicheck" target, only the source files
which were being compiled would have been checked by Coccinelle.
However, just because we aren't compiling a source file doesn't mean we
have to exclude it from analysis. This will allow us to catch more
mistakes, in particular ones that affect Windows-only sources since
Coccinelle currently runs only on Linux.
Make the "coccicheck" target run on all C sources except for those that
are taken from some third-party source. We don't want to patch these
files since we want them to be as close to upstream as possible so that
it'll be easier to pull in upstream updates.
When running a build on Arch Linux with no additional flags provided,
after applying this patch, the following sources are now checked:
* block-sha1/sha1.c
* compat/access.c
* compat/basename.c
* compat/fileno.c
* compat/gmtime.c
* compat/hstrerror.c
* compat/memmem.c
* compat/mingw.c
* compat/mkdir.c
* compat/mkdtemp.c
* compat/mmap.c
* compat/msvc.c
* compat/pread.c
* compat/precompose_utf8.c
* compat/qsort.c
* compat/setenv.c
* compat/sha1-chunked.c
* compat/snprintf.c
* compat/stat.c
* compat/strcasestr.c
* compat/strdup.c
* compat/strtoimax.c
* compat/strtoumax.c
* compat/unsetenv.c
* compat/win32/dirent.c
* compat/win32/path-utils.c
* compat/win32/pthread.c
* compat/win32/syslog.c
* compat/win32/trace2_win32_process_info.c
* compat/win32mmap.c
* compat/winansi.c
* ppc/sha1.c
This also results in the following source now being excluded:
* compat/obstack.c
Instead of generating $(FOUND_C_SOURCES) from a
`$(shell $(FIND_SOURCE_FILES))` invocation, an alternative design was
considered which involved converting $(FIND_SOURCE_FILES) into
$(SOURCE_FILES) which would hold a list of filenames from the
$(FIND_SOURCE_FILES) invocation. We would simply filter `%.c` files into
$(ALL_C_SOURCES). $(SOURCE_FILES) would then be passed directly to the
etags, ctags and cscope commands. We can see from the following
invocation
$ git ls-files '*.[hcS]' '*.sh' ':!*[tp][0-9][0-9][0-9][0-9]*' ':!contrib' | wc -c
12779
that the number of characters in this list would pose a problem on
platforms with short command-line length limits (such as CMD which has a
max of 8191 characters). As a result, we don't perform this change.
However, we can see that the same issue may apply when running
Coccinelle since $(COCCI_SOURCES) is also a list of filenames:
if ! echo $(COCCI_SOURCES) | xargs $$limit \
$(SPATCH) --sp-file $< $(SPATCH_FLAGS) \
>$@+ 2>$@.log; \
This is justified since platforms that support Coccinelle generally have
reasonably long command-line length limits and so we are safe for the
foreseeable future.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, $(FIND_SOURCE_FILES) has two modes: if `git ls-files` is
present, it will use that to enumerate the files in the repository; else
it will use `$(FIND) .` to enumerate the files in the directory.
There is a subtle difference between these two methods, however. With
ls-files, filenames don't have a leading `./` while with $(FIND), they
do. This does not currently pose a problem but in a future patch, we
will be using `filter-out` to process the list of files with the
assumption that there is no prefix.
Unify the two possible invocations in $(FIND_SOURCE_FILES) by using sed
to remove the `./` prefix in the $(FIND) case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some files in our codebase are borrowed from other projects, and
minimally updated to suit our own needs. We'd sometimes need to tell
our own sources and these third-party sources apart for management
purposes (e.g. we may want to be less strict about coding style and
other issues on third-party files).
Define the $(MAKE) variable THIRD_PARTY_SOURCES that can be used to
match names of third-party sources.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'progress.c' has seen a few fixes recently [1], and, unfortunately,
some of those fixes required further fixes [2]. It seems it's time to
have a few tests focusing on the subtleties of the progress display.
Add the 'test-tool progress' subcommand to help testing the progress
display, reading instructions from standard input and turning them
into calls to the display_progress() and display_throughput()
functions with the given parameters.
The progress display is, however, critically dependent on timing,
because it's only updated once every second or, if the toal is known
in advance, every 1%, and there is the throughput rate as well. These
make the progress display far too undeterministic for testing as-is.
To address this, add a few testing-specific variables and functions to
'progress.c', allowing the the new test helper to:
- Disable the triggered-every-second SIGALRM and set the
'progress_update' flag explicitly based in the input instructions.
This way the progress line will be updated deterministically when
the test wants it to be updated.
- Specify the time elapsed since start_progress() to make the
throughput rate calculations deterministic.
Add the new test script 't0500-progress-display.sh' to check a few
simple cases with and without throughput, and that a shorter progress
line properly covers up the previously displayed line in different
situations.
[1] See commits 545dc345eb (progress: break too long progress bar
lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous
progress update dynamically, 2019-04-12).
[2] 1aed1a5f25 (progress: avoid empty line when breaking the progress
line, 2019-05-19)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, $(LIB_H) is generated from two modes: if `git ls-files` is
present, it will use that to enumerate the files in the repository; else
it will use `$(FIND) .` to enumerate the files in the directory.
There is a subtle difference between these two methods, however. With
ls-files, filenames don't have a leading `./` while with $(FIND), they
do. This results in $(CHK_HDRS) having to substitute out the leading
`./` before it uses $(LIB_H).
Unify the two possible values in $(LIB_H) by using patsubst to remove the
`./` prefix at its definition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
e87de7cab4 ("grep: un-break building with PCRE < 8.32", 2017-05-25)
added a restriction for JIT support that is no longer needed after
pcre_jit_exec() calls were removed.
Reorganize the definitions in grep.h so that JIT support could be
detected early and NO_LIBPCRE1_JIT could be used reliably to enforce
JIT doesn't get used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few important config settings that are not loaded
during git_default_config. These are instead loaded on-demand.
Centralize these config options to a single scan, and store
all of the values in a repo_settings struct. The values for
each setting are initialized as negative to indicate "unset".
This centralization will be particularly important in a later
change to introduce "meta" config settings that change the
defaults for these config settings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support building Git with Visual Studio
The bits about .git/branches/* have been dropped from the series.
We may want to drop the support for it, but until that happens, the
tests should rely on the existence of the support to pass.
* js/visual-studio: (23 commits)
git: avoid calling aliased builtins via their dashed form
bin-wrappers: append `.exe` to target paths if necessary
.gitignore: ignore Visual Studio's temporary/generated files
.gitignore: touch up the entries regarding Visual Studio
vcxproj: also link-or-copy builtins
msvc: add a Makefile target to pre-generate the Visual Studio solution
contrib/buildsystems: add a backend for modern Visual Studio versions
contrib/buildsystems: handle options starting with a slash
contrib/buildsystems: also handle -lexpat
contrib/buildsystems: handle libiconv, too
contrib/buildsystems: handle the curl library option
contrib/buildsystems: error out on unknown option
contrib/buildsystems: optionally capture the dry-run in a file
contrib/buildsystems: redirect errors of the dry run into a log file
contrib/buildsystems: ignore gettext stuff
contrib/buildsystems: handle quoted spaces in filenames
contrib/buildsystems: fix misleading error message
contrib/buildsystems: ignore irrelevant files in Generators/
contrib/buildsystems: ignore invalidcontinue.obj
Vcproj.pm: urlencode '<' and '>' when generating VC projects
...
When compiling with Visual Studio, the projects' names are identical to
the executables modulo the extensions. Read: there will exist both a
directory called `git` as well as an executable called `git.exe` in the
end. Which means that the bin-wrappers *need* to target the `.exe` files
lest they try to execute directories.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the dir-iterator API and apply it to the local clone
optimization codepath.
* mt/dir-iterator-updates:
clone: replace strcmp by fspathcmp
clone: use dir-iterator to avoid explicit dir traversal
clone: extract function from copy_or_link_directory
clone: copy hidden paths at local clone
dir-iterator: add flags parameter to dir_iterator_begin
dir-iterator: refactor state machine model
dir-iterator: use warning_errno when possible
dir-iterator: add tests for dir-iterator API
clone: better handle symlinked files at .git/objects/
clone: test for our behavior on odd objects/* content
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
Extend the test coverage a bit.
* cc/test-oidmap:
t0016: add 'remove' subcommand test
test-oidmap: remove 'add' subcommand
test-hashmap: remove 'hash' command
oidmap: use sha1hash() instead of static hash() function
t: add t0016-oidmap.sh
t/helper: add test-oidmap.c
Create t/helper/test-dir-iterator.c, which prints relevant information
about a directory tree iterated over with dir-iterator.
Create t/t0066-dir-iterator.sh, which tests that dir-iterator does
iterate through a whole directory tree as expected.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
[matheus.bernardino: update to use test-tool and some minor aesthetics]
Helped-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support to build with MSVC has been updated.
* jh/msvc:
msvc: ignore .dll and incremental compile output
msvc: avoid debug assertion windows in Debug Mode
msvc: do not pretend to support all signals
msvc: add pragmas for common warnings
msvc: add a compile-time flag to allow detailed heap debugging
msvc: support building Git using MS Visual C++
msvc: update Makefile to allow for spaces in the compiler path
msvc: fix detect_msys_tty()
msvc: define ftello()
msvc: do not re-declare the timespec struct
msvc: mark a variable as non-const
msvc: define O_ACCMODE
msvc: include sigset_t definition
msvc: fix dependencies of compat/msvc.c
mingw: replace mingw_startup() hack
obstack: fix compiler warning
cache-tree/blame: avoid reusing the DEBUG constant
t0001 (mingw): do not expect a specific order of stdout/stderr
Mark .bat files as requiring CR/LF endings
mingw: fix a typo in the msysGit-specific section
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
As fetch_objects() is now used only in promisor-remote.c
and should't be used outside it, let's move it into
promisor-remote.c, make it static there, and remove
fetch-object.{c,h}.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The promisor-remote.{c,h} files will contain functions to
manage many promisor remotes.
We expect that there will not be a lot of promisor remotes,
so it is ok to use a simple linked list to manage them.
Helped-by: Jeff King <peff@peff.net>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, Git can be built using the Microsoft toolchain, via:
make MSVC=1 [DEBUG=1]
Third party libraries are built from source using the open source
"vcpkg" tool set. See https://github.com/Microsoft/vcpkg
On a first build, the vcpkg tools and the third party libraries are
automatically downloaded and built. DLLs for the third party libraries
are copied to the top-level (and t/helper) directory to facilitate
debugging. See compat/vcbuild/README.
A series of .bat files are invoked by the Makefile to find the location
of the installed version of Visual Studio and the associated compiler
tools (essentially replicating the environment setup performed by a
"Developer Command Prompt"). This should find the most recent VS2015 or
VS2017 installation. Output from these scripts are used by the Makefile
to define compiler and linker pathnames and -I and -L arguments.
The build produces .pdb files for both debug and release builds.
Note: This commit was squashed from an organic series of commits
developed between 2016 and 2018 in Git for Windows' `master` branch.
This combined commit eliminates the obsolete commits related to fetching
NuGet packages for third party libraries. It is difficult to use NuGet
packages for C/C++ sources because they may be built by earlier versions
of the MSVC compiler and have CRT version and linking issues.
Additionally, the C/C++ NuGet packages that we were using tended to not
be updated concurrently with the sources. And in the case of cURL and
OpenSSL, this could expose us to security issues.
Helped-by: Yue Lin Ho <b8732003@student.nsysu.edu.tw>
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Thomas Gummerer
Heba Waly
Bert Wesarg
Jeff King
Alexandr Miloslavskiy
ryenus
Johannes Schindelin
Derrick Stolee
Denton Liu
SZEDER Gábor
Carlo Marcelo Arenas Belón
Daniel Ferreira
Christian Couder
Jeff Hostetler