Add strbuf_utf8_align() which will align a given string into a strbuf
as per given align_type and width. If the width is greater than the
string length then no alignment is performed.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the recent change to ignore the UTF8 BOM at the beginning of
.gitignore files, we now have two codepaths that do such a skipping
(the other one is for reading the configuration files).
Introduce utf8_bom[] constant string and skip_utf8_bom() helper
and teach .gitignore code how to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our is_hfs_dotgit function relies on the hackily-implemented
next_hfs_char to give us the next character that an HFS+
filename comparison would look at. It's hacky because it
doesn't implement the full case-folding table of HFS+; it
gives us just enough to see if the path matches ".git".
At the end of next_hfs_char, we use tolower() to convert our
32-bit code point to lowercase. Our tolower() implementation
only takes an 8-bit char, though; it throws away the upper
24 bits. This means we can't have any false negatives for
is_hfs_dotgit. We only care about matching 7-bit ASCII
characters in ".git", and we will correctly process 'G' or
'g'.
However, we _can_ have false positives. Because we throw
away the upper bits, code point \u{0147} (for example) will
look like 'G' and get downcased to 'g'. It's not known
whether a sequence of code points whose truncation ends up
as ".git" is meaningful in any language, but it does not
hurt to be more accurate here. We can just pass out the full
32-bit code point, and compare it manually to the upper and
lowercase characters we care about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not allow paths with a ".git" component to be added to
the index, as that would mean repository contents could
overwrite our repository files. However, asking "is this
path the same as .git" is not as simple as strcmp() on some
filesystems.
HFS+'s case-folding does more than just fold uppercase into
lowercase (which we already handle with strcasecmp). It may
also skip past certain "ignored" Unicode code points, so
that (for example) ".gi\u200ct" is mapped ot ".git".
The full list of folds can be found in the tables at:
https://www.opensource.apple.com/source/xnu/xnu-1504.15.3/bsd/hfs/hfscommon/Unicode/UCStringCompareData.h
Implementing a full "is this path the same as that path"
comparison would require us importing the whole set of
tables. However, what we want to do is much simpler: we
only care about checking ".git". We know that 'G' is the
only thing that folds to 'g', and so on, so we really only
need to deal with the set of ignored code points, which is
much smaller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move strbuf_addchars() to strbuf.c, where it belongs, and make it
available for other callers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main loop in strbuf_utf8_replace() could summed up as:
while ('src' is still valid) {
1) advance 'src' to copy ANSI escape sequences
2) advance 'src' to copy/replace visible characters
}
The problem is after #1, 'src' may have reached the end of the string
(so 'src' points to NUL) and #2 will continue to copy that NUL as if
it's a normal character. Because the output is stored in a strbuf,
this NUL accounted in the 'len' field as well. Check after #1 and
break the loop if necessary.
The test does not look obvious, but the combination of %>>() should
make a call trace like this
show_log()
pretty_print_commit()
format_commit_message()
strbuf_expand()
format_commit_item()
format_and_pad_commit()
strbuf_utf8_replace()
where %C(auto)%d would insert a color reset escape sequence in the end
of the string given to strbuf_utf8_replace() and show_log() uses
fwrite() to send everything to stdout (including the incorrect NUL
inserted by strbuf_utf8_replace)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the logic to compute the display width needed for utf8
strings and allow us to more easily maintain the tables used in
that logic.
We may want to let the users choose if codepoints with ambiguous
widths are treated as a double or single width in a follow-up patch.
* tb/unicode-6.3-zero-width:
utf8: make it easier to auto-update git_wcwidth()
utf8.c: use a table for double_width
The function git_wcwidth() returns for a given unicode code point the
width on the display:
-1 for control characters,
0 for combining or other non-visible code points
1 for e.g. ASCII
2 for double-width code points.
This table had been originally been extracted for one Unicode
version, probably 3.2.
We now use two tables these days, one for zero-width and another for
double-width. Make it easier to update these tables to a later
version of Unicode by factoring out the table from utf8.c into
unicode_width.h and add the script update_unicode.sh to update the
table based on the latest Unicode specification files.
Thanks to Peter Krefting <peter@softwolves.pp.se> and Kevin Bracey
<kevin@bracey.fi> for helping with their Unicode knowledge.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor git_wcwidth() and replace the if-else-if chain.
Use the table double_width which is scanned by the bisearch() function,
which is already used to find combining code points.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unicode 6.3 defines more code points as combining or accents. For
example, the character "ö" could be expressed as an "o" followed by
U+0308 COMBINING DIARESIS (aka umlaut, double-dot-above). We should
consider that such a sequence of two codepoints occupies one display
column for the alignment purposes, and for that, git_wcwidth()
should return 0 for them. Affected codepoints are:
U+0358..U+035C
U+0487
U+05A2, U+05BA, U+05C5, U+05C7
U+0604, U+0616..U+061A, U+0659..U+065F
Earlier unicode standards had defined these as "reserved".
Only the range 0..U+07FF has been checked to see which codepoints
need to be marked as 0-width while preparing for this commit; more
updates may be needed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We treat these as unsigned everywhere and compare against unsigned
values, so declare them using the typedef we already have for this.
While we're here, fix the indentation as well.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
iconv(3) returns "(size_t) -1" on error. Make sure that we cast the
"-1" properly when checking for this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems experience failures in t4205-*.sh (tests 18-20, 27)
which all relate to the use of truncation with the %< padding
placeholder. This capability was added in the commit a7f01c6b
("pretty: support truncating in %>, %< and %><", 19-04-2013).
The truncation support was implemented with the assistance of a
new strbuf function (strbuf_utf8_replace). This function contains
the following code:
strbuf_attach(sb_src, strbuf_detach(&sb_dst, NULL),
sb_dst.len, sb_dst.alloc);
Unfortunately, this code is subject to unspecified behaviour. In
particular, the order of evaluation of the argument expressions
(along with the associated side effects) is not specified by the
C standard. Note that the second argument expression is a call to
strbuf_detach() which, as a side effect, sets the 'len' and 'alloc'
fields of the sb_dst argument to zero. Depending on the order of
evaluation of the argument expressions to the strbuf_attach call,
this can lead to assigning an empty string to 'sb_src'.
In order to remove the undesired behaviour, we replace the above
line of code with:
strbuf_swap(sb_src, &sb_dst);
strbuf_release(&sb_dst);
which achieves the desired effect without provoking unspecified
behaviour.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is pretty useful in `%<(100)%s%Cred%>(20)% an' where %s does not
use up all 100 columns and %an needs more than 20 columns. By
replacing %>(20) with %>>(20), %an can steal spaces from %s.
%>> understands escape sequences, so %Cred does not stop it from
stealing spaces in %<(100).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%>(N,trunc) truncates the right part after N columns and replace the
last two letters with "..". ltrunc does the same on the left. mtrunc
cuts the middle out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "format-patch" quoted a non-ascii strings on the header files,
it incorrectly applied rfc2047 and chopped a single character in
the middle of it.
* ks/rfc2047-one-char-at-a-time:
format-patch: RFC 2047 says multi-octet character may not be split
Some platforms and users spell UTF-8 differently; retry with the
most official "UTF-8" when the system does not understand the
user-supplied encoding name that are the common alternative
spellings of UTF-8.
* jk/utf-8-can-be-spelled-differently:
utf8: accept alternate spellings of UTF-8
Even though an earlier attempt (bafc478..41dd00bad) cleaned
up RFC 2047 encoding, pretty.c::add_rfc2047() still decides
where to split the output line by going through the input
one byte at a time, and potentially splits a character in
the middle. A subject line may end up showing like this:
".... fö?? bar". (instead of ".... föö bar".)
if split incorrectly.
RFC 2047, section 5 (3) explicitly forbids such beaviour
Each 'encoded-word' MUST represent an integral number of
characters. A multi-octet character may not be split across
adjacent 'encoded- word's.
that means that e.g. for
Subject: .... föö bar
encoding
Subject: =?UTF-8?q?....=20f=C3=B6=C3=B6?=
=?UTF-8?q?=20bar?=
is correct, and
Subject: =?UTF-8?q?....=20f=C3=B6=C3?= <-- NOTE ö is broken here
=?UTF-8?q?=B6=20bar?=
is not, because "ö" character UTF-8 encoding C3 B6 is split here across
adjacent encoded words.
To fix the problem, make the loop grab one _character_ at a time and
determine its output length to see where to break the output line. Note
that this version only knows about UTF-8, but the logic to grab one
character is abstracted out in mbs_chrlen() function to make it possible
to extend it to other encodings with the help of iconv in the future.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The iconv implementation on many platforms will accept
variants of UTF-8, including "UTF8", "utf-8", and "utf8",
but some do not. We make allowances in our code to treat
them all identically, but we sometimes hand the string from
the user directly to iconv. In this case, the platform iconv
may or may not work.
There are really four levels of platform iconv support for
these synonyms:
1. All synonyms understood (e.g., glibc).
2. Only the official "UTF-8" understood (e.g., Windows).
3. Official "UTF-8" not understood, but some other synonym
understood (it's not known whether such a platform exists).
4. Neither "UTF-8" nor any synonym understood (e.g.,
ancient systems, or ones without utf8 support
installed).
This patch teaches git to fall back to using the official
"UTF-8" spelling when iconv_open fails (and the encoding was
one of the synonym spellings). This makes things more
convenient to users of type 2 systems, as they can now use
any of the synonyms for the log output encoding.
Type 1 systems are not affected, as iconv already works on
the first try.
Type 4 systems are not affected, as both attempts already
fail.
Type 3 systems will not benefit from the feature, but
because we only use "UTF-8" as a fallback, they will not be
regressed (i.e., you can continue to use "utf8" if your
platform supports it). We could try all the various
synonyms, but since such systems are not even known to
exist, it's not worth the effort.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a new helper that prints a message and counts its display width
to align the help messages parse-options produces.
* jx/utf8-printf-width:
Add utf8_fprintf helper that returns correct number of columns
Since command usages can be translated, they may include utf-8
encoded strings, and the output in console may not align well any
more. This is because strlen() is different from strwidth() on utf-8
strings.
A wrapper utf8_fprintf() can help to return the correct number of
columns required.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line to be wrapped has a solid run of non space characters
whose length exactly is the wrap width, "git shortlog -w" failed to
add a newline after such a line.
* sp/shortlog-missing-lf:
strbuf_add_wrapped*(): Remove unused return value
shortlog: fix wrapping lines of wraplen
Since shortlog isn't using the return value anymore (see previous
commit), the functions can be changed to void.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Various rfc2047 quoting issues around a non-ASCII name on the From:
line in the output from format-patch have been corrected.
* js/format-2047:
format-patch tests: check quoting/encoding in To: and Cc: headers
format-patch: fix rfc2047 address encoding with respect to rfc822 specials
format-patch: make rfc2047 encoding more strict
format-patch: introduce helper function last_line_length()
format-patch: do not wrap rfc2047 encoded headers too late
format-patch: do not wrap non-rfc2047 headers too early
utf8: fix off-by-one wrapping of text
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Conflicts:
builtin/mailinfo.c
Fixes many rfc2047 quoting issues in the output from format-patch.
* js/format-2047:
format-patch tests: check quoting/encoding in To: and Cc: headers
format-patch: fix rfc2047 address encoding with respect to rfc822 specials
format-patch: make rfc2047 encoding more strict
format-patch: introduce helper function last_line_length()
format-patch: do not wrap rfc2047 encoded headers too late
format-patch: do not wrap non-rfc2047 headers too early
utf8: fix off-by-one wrapping of text
Callers of reencode_string() that re-encodes a string from one
encoding to another all used ad-hoc way to bypass the case where the
input and the output encodings are the same. Some did strcmp(),
some did strcasecmp(), yet some others when converting to UTF-8 used
is_encoding_utf8().
Introduce same_encoding() helper function to make these callers use
the same logic. Notably, is_encoding_utf8() has a work-around for
common misconfiguration to use "utf8" to name UTF-8 encoding, which
does not match "UTF-8" hence strcasecmp() would not consider the
same. Make use of it in this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wrapping logic in strbuf_add_wrapped_text() does currently not allow
lines that entirely fill the allowed width, instead it wraps the line one
character too early.
For example, the text "This is the sixth commit." formatted via
"%w(11,1,2)" (wrap at 11 characters, 1 char indent of first line, 2 char
indent of following lines) results in four lines: " This is", " the",
" sixth", " commit." This is wrong, because " the sixth" is exactly
11 characters long, and thus allowed.
Fix this by allowing the (width+1) character of a line to be a valid
wrapping point if it is a whitespace character.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function strbuf_add_wrapped_text takes a NUL-terminated
string. This makes it annoying to wrap strings we have as a
pointer and a length.
Refactoring strbuf_add_wrapped_text and all of its
sub-functions to handle fixed-length strings turned out to
be really ugly. So this implementation is lame; it just
strdups the text and operates on the NUL-terminated version.
This should be fine as the strings we are wrapping are
generally pretty short. If it becomes a problem, we can
optimize later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
is_utf8() works by calling utf8_width() for each character at the
supplied location. In strbuf_add_wrapped_text(), we do that anyway
while wrapping the lines. So instead of checking the encoding
beforehand, optimistically assume that it's utf-8 and wrap along
until an invalid character is hit, and when that happens start over.
This pays off if the text consists only of valid utf-8 characters.
The following command was run against the Linux kernel repo with
git 1.7.0:
$ time git log --format='%b' v2.6.32 >/dev/null
real 0m2.679s
user 0m2.580s
sys 0m0.100s
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m4.342s
user 0m4.230s
sys 0m0.110s
And with this patch series:
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m3.741s
user 0m3.630s
sys 0m0.110s
So the cost of wrapping is reduced to 70% in this case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch before the previous one made sure that all callers of
strbuf_add_wrapped_text() supply a strbuf. Replace all calls of
strbuf_write() with regular strbuf functions and remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch made sure that strbuf_add_wrapped_text() (and thus
strbuf_add_indented_text(), too) always get a strbuf. Make use of
this fact by adding strbuf_addchars(), a small helper that adds a
char the specified number of times to a strbuf, and use it to replace
print_spaces().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_add_wrapped_text() is called only from print_wrapped_text()
without a strbuf (in which case it writes its results to stdout).
At its only callsite, supply a strbuf, call strbuf_add_wrapped_text()
directly and remove the wrapper function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak
Junio C Hamano
Jeff King
René Scharfe
Nguyễn Thái Ngọc Duy
Torsten Bögershausen
John Keeping
Ramsay Jones
Kirill Smelkov
Jiang Xin
Steffen Prohaska
Jan H. Schönherr
René Scharfe