The "simple-ipc" did not compile without pthreads support, but the
build procedure was not properly account for it.
* jh/simple-ipc-sans-pthread:
simple-ipc: correct ifdefs when NO_PTHREADS is defined
Simple IPC always requires threads (in addition to various
platform-specific IPC support). Fix the ifdefs in the Makefile
to define SUPPORTS_SIMPLE_IPC when appropriate.
Previously, the Unix version of the code would only verify that
Unix domain sockets were available.
This problem was reported here:
https://lore.kernel.org/git/YKN5lXs4AoK%2FJFTO@coredump.intra.peff.net/T/#m08be8f1942ea8a2c36cfee0e51cdf06489fdeafc
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portability fix for command line completion script (in contrib/).
* si/zsh-complete-comment-fix:
work around zsh comment in __git_complete_worktree_paths
[PATCH]: contrib/completion/git-completion.bash, there is a construct
where comment lines are placed between the command that is on
the upstream of a pipe and the command that is on the downstream
of a pipe in __git_complete_worktree_paths function.
Unfortunately, this script is also used by Zsh completion, but
Zsh mishandles this construct when "interactive_comments" option is not
set (by default it is off on macOS), resulting in a breakage:
$ git worktree remove [TAB]
$ git worktree remove __git_complete_worktree_paths:7: command not found: #
Move the comment, even though it explains what happens on the
downstream of the pipe and logically belongs where it is right
now, before the entire pipeline, to work around this problem.
Signed-off-by: Sardorbek Imomaliev <sardorbek.imomaliev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git subtree" updates.
* ls/subtree: (30 commits)
subtree: be stricter about validating flags
subtree: push: allow specifying a local rev other than HEAD
subtree: allow 'split' flags to be passed to 'push'
subtree: allow --squash to be used with --rejoin
subtree: give the docs a once-over
subtree: have $indent actually affect indentation
subtree: don't let debug and progress output clash
subtree: add comments and sanity checks
subtree: remove duplicate check
subtree: parse revs in individual cmd_ functions
subtree: use "^{commit}" instead of "^0"
subtree: don't fuss with PATH
subtree: use "$*" instead of "$@" as appropriate
subtree: use more explicit variable names for cmdline args
subtree: use git-sh-setup's `say`
subtree: use `git merge-base --is-ancestor`
subtree: drop support for git < 1.7
subtree: more consistent error propagation
subtree: don't have loose code outside of a function
subtree: t7900: add porcelain tests for 'pull' and 'push'
...
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
Don't silently ignore a flag that's invalid for a given subcommand. The
user expected it to do something; we should tell the user that they are
mistaken, instead of surprising the user.
It could be argued that this change might break existing users. I'd
argue that those existing users are already broken, and they just don't
know it. Let them know that they're broken.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git subtree split' lets you specify a rev other than HEAD. 'git push'
lets you specify a mapping between a local thing and a remot ref. So
smash those together, and have 'git subtree push' let you specify which
local thing to run split on and push the result of that split to the
remote ref.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'push' does a 'split' internally, but it doesn't pass flags through to the
'split'. This is silly, if you need to pass flags to 'split', then it
means that you can't use 'push'!
So, have 'push' accept 'split' flags, and pass them through to 'split'.
Add tests for this by copying split's tests with minimal modification.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides being a genuinely useful thing to do, this also just makes sense
and harmonizes which flags may be used when. `git subtree split
--rejoin` amounts to "automatically go ahead and do a `git subtree
merge` after doing the main `git subtree split`", so it's weird and
arbitrary that you can't pass `--squash` to `git subtree split --rejoin`
like you can `git subtree merge`. It's weird that `git subtree split
--rejoin` inherits `git subtree merge`'s `--message` but not `--squash`.
Reconcile the situation by just having `split --rejoin` actually just
call `merge` internally (or call `add` instead, as appropriate), so it
can get access to the full `merge` behavior, including `--squash`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just went through the docs looking for anything inaccurate or that can
be improved.
In the '-h' text, in the man page synopsis, and in the man page
description: Normalize the ordering of the list of sub-commands: 'add',
'merge', 'split', 'pull', 'push'. This allows us to kinda separate the
lower-level add/merge/split from the higher-level pull/push.
'-h' text:
- correction: Indicate that split's arg is optional.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
man page:
- correction: State that all subcommands take options (it seemed to
indicate that only 'split' takes any options other than '-P').
- correction: 'split' only guarantees that the results are identical if
the flags are identical.
- correction: The flag is named '--ignore-joins', not '--ignore-join'.
- completeness: Clarify that 'push' always operates on HEAD, and that
'split' operates on HEAD if no local commit is given.
- clarity: In the description, when listing commands, repeat what their
arguments are. This way the reader doesn't need to flip back and
forth between the command description and the synopsis and the full
description to understand what's being said.
- clarity: In the <variables> used to give command arguments, give
slightly longer, descriptive names. Like <local-commit> instead of
just <commit>.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
- style: In the synopsis, list options before the subcommand. This
makes things line up and be much more readable when shown
non-monospace (such as in `make html`), and also more closely matches
other man pages (like `git-submodule.txt`).
- style: Use the correct syntax for indicating the options ([<options>]
instead of [OPTIONS]).
- style: In the synopsis, separate 'pull' and 'push' from the other
lower-level commands. I think this helps readability.
- style: Code-quote things in prose that seem like they should be
code-quoted, like '.gitmodules', flags, or full commands.
- style: Minor wording improvements, like more consistent mood (many
of the command descriptions start in the imperative mood and switch
to the indicative mode by the end). That sort of thing.
- style: Capitalize "ID".
- style: Remove the "This option is only valid for XXX command" remarks
from each option, and instead rely on the section headings.
- style: Since that line is getting edited anyway, switch "behaviour" to
American "behavior".
- style: Trim trailing whitespace.
`todo`:
- style: Trim trailing whitespace.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the $indent variable is just used to track how deeply we're
nested, and the debug log is indented by things like
debug " foo"
That is: The indentation-level is hard-coded. It used to be that the
code couldn't recurse, so the indentation level could be known
statically, so it made sense to just hard-code it in the
output. However, since 315a84f9aa ("subtree: use commits before rejoins
for splits", 2018-09-28), it can now recurse, and the debug log is
misleading.
So fix that. Indent according to $indent.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, debug output (triggered by passing '-d') and progress output
stomp on each other. The debug output is just streamed as lines to
stderr, and the progress output is sent to stderr as '%s\r'. When
writing to a file, it is awkward to read and difficult to distinguish
between the debug output and a progress line. When writing to a
terminal the debug lines hide progress lines.
So, when '-d' has been passed, spit out progress as 'progress: %s\n',
instead of as '%s\r', so that it can be detected, and so that the debug
lines don't overwrite the progress when written to a terminal.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For each function in subtree, add a usage comment saying what the
arguments are, and add an `assert` checking the number of arguments.
In figuring out each thing's arguments in order to write those comments
and assertions, it turns out that find_existing_splits is written as if
it takes multiple 'revs', but it is in fact only ever passed a single
'rev':
unrevs="$(find_existing_splits "$dir" "$rev")" || exit $?
So go ahead and codify that by documenting and asserting that it takes
exactly two arguments, one dir and one rev.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`cmd_add` starts with a check that the directory doesn't yet exist.
However, the `main` function performs the exact same check before
calling `cmd_add`. So remove the check from `cmd_add`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main argument parser goes ahead and tries to parse revs to make
things simpler for the sub-command implementations. But, it includes
enough special cases for different sub-commands. And it's difficult
having having to think about "is this info coming from an argument, or a
global variable?". So the main argument parser's effort to make things
"simpler" ends up just making it more confusing and complicated.
Begone with the 'revs' global variable; parse 'rev=$(...)' as needed in
individual 'cmd_*' functions.
Begone with the 'default' global variable. Its would-be value is
knowable just from which function we're in.
Begone with the 'ensure_single_rev' function. Its functionality can be
achieved by passing '--verify' to 'git rev-parse'.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are synonyms. Both are used in the file. ^{commit} is clearer, so
"standardize" on that.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts needing to fuss with with adding $(git --exec-prefix) PATH
before loading git-sh-setup is a thing of the past. As far as I can
tell, it's been a thing of the past since since Git v1.2.0 (2006-02-12),
or more specifically, since 77cb17e940 (Exec git programs without using
PATH, 2006-01-10). However, it stuck around in contrib scripts and in
third-party scripts for long enough that it wasn't unusual to see.
Originally `git subtree` didn't fuss with PATH, but when people
(including the original subtree author) had problems, because it was a
common thing to see, it seemed that having subtree fuss with PATH was a
reasonable solution.
Here is an abridged history of fussing with PATH in subtree:
2987e6add3 (Add explicit path of git installation by 'git --exec-path', Gianluca Pacchiella, 2009-08-20)
As pointed out by documentation, the correct use of 'git-sh-setup' is
using $(git --exec-path) to avoid problems with not standard
installations.
-. git-sh-setup
+. $(git --exec-path)/git-sh-setup
33aaa697a2 (Improve patch to use git --exec-path: add to PATH instead, Avery Pennarun, 2009-08-26)
If you (like me) are using a modified git straight out of its source
directory (ie. without installing), then --exec-path isn't actually correct.
Add it to the PATH instead, so if it is correct, it'll work, but if it's
not, we fall back to the previous behaviour.
-. $(git --exec-path)/git-sh-setup
+PATH=$(git --exec-path):$PATH
+. git-sh-setup
9c632ea29c ((Hopefully) fix PATH setting for msysgit, Avery Pennarun, 2010-06-24)
Reported by Evan Shaw. The problem is that $(git --exec-path) includes a
'git' binary which is incompatible with the one in /usr/bin; if you run it,
it gives you an error about libiconv2.dll.
+OPATH=$PATH
PATH=$(git --exec-path):$PATH
. git-sh-setup
+PATH=$OPATH # apparently needed for some versions of msysgit
df2302d774 (Another fix for PATH and msysgit, Avery Pennarun, 2010-06-24)
Evan Shaw tells me the previous fix didn't work. Let's use this one
instead, which he says does work.
This fix is kind of wrong because it will run the "correct" git-sh-setup
*after* the one in /usr/bin, if there is one, which could be weird if you
have multiple versions of git installed. But it works on my Linux and his
msysgit, so it's obviously better than what we had before.
-OPATH=$PATH
-PATH=$(git --exec-path):$PATH
+PATH=$PATH:$(git --exec-path)
. git-sh-setup
-PATH=$OPATH # apparently needed for some versions of msysgit
First of all, I disagree with Gianluca's reading of the documentation:
- I haven't gone back to read what the documentation said in 2009, but
in my reading of the 2021 documentation is that it includes "$(git
--exec-path)/" in the synopsis for illustrative purposes, not to say
it's the proper way.
- After being executed by `git`, the git exec path should be the very
first entry in PATH, so it shouldn't matter.
- None of the scripts that are part of git do it that way.
But secondly, the root reason for fussing with PATH seems to be that
Avery didn't know that he needs to set GIT_EXEC_PATH if he's going to
use git from the source directory without installing.
And finally, Evan's issue is clearly just a bug in msysgit. I assume
that msysgit has since fixed the issue, and also msysgit has been
deprecated for 6 years now, so let's drop the workaround for it.
So, remove the line fussing with PATH. However, since subtree *is* in
'contrib/' and it might get installed in funny ways by users
after-the-fact, add a sanity check to the top of the script, checking
that it is installed correctly.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"$*" is for when you want to concatenate the args together,
whitespace-separated; and "$@" is for when you want them to be separate
strings.
There are several places in subtree that erroneously use $@ when
concatenating args together into an error message.
For instance, if the args are argv[1]="dead" and argv[2]="beef", then
the line
die "You must provide exactly one revision. Got: '$@'"
surely intends to call 'die' with the argument
argv[1]="You must provide exactly one revision. Got: 'dead beef'"
however, because the line used $@ instead of $*, it will actually call
'die' with the arguments
argv[1]="You must provide exactly one revision. Got: 'dead"
argv[2]="beef'"
This isn't a big deal, because 'die' concatenates its arguments together
anyway (using "$*"). But that doesn't change the fact that it was a
mistake to use $@ instead of $*, even though in the end $@ still ended
up doing the right thing.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it painfully obvious when reading the code which variables are
direct parsings of command line arguments.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
subtree currently defines its own `say` implementation, rather than
using git-sh-setups's implementation. Change that, don't re-invent the
wheel.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing a slow `rev_is_descendant_of_branch $a $b` function
in shell, just use the fast `git merge-base --is-ancestor $b $a`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suport for Git versions older than 1.7.0 (older than February 2010) was
nice to have when git-subtree lived out-of-tree. But now that it lives
in git.git, it's not necessary to keep around. While it's technically
in contrib, with the standard 'git' packages for common systems
(including Arch Linux and macOS) including git-subtree, it seems
vanishingly likely to me that people are separately installing
git-subtree from git.git alongside an older 'git' install (although it
also seems vanishingly likely that people are still using >11 year old
git installs).
Not that there's much reason to remove it either, it's not much code,
and none of my changes depend on a newer git (to my knowledge, anyway;
I'm not actually testing against older git). I just figure it's an easy
piece of fat to trim, in the journey to making the whole thing easier to
hack on.
"Ignore space change" is probably helpful when viewing this diff.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that every $(subshell) that calls a function (as opposed to an
external executable) is followed by `|| exit $?`. Similarly, ensure that
every `cmd | while read; do ... done` loop is followed by `|| exit $?`.
Both of those constructs mean that it can miss `die` calls, and keep
running when it shouldn't.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shove all of the loose code inside of a main() function.
This comes down to personal preference more than anything else. A
preference that I've developed over years of maintaining large Bash
scripts, but still a mere personal preference.
In this specific case, it's also moving the `set -- -h`, the `git
rev-parse --parseopt`, and the `. git-sh-setup` to be closer to all
the rest of the argument parsing, which is a readability win on its
own, IMO.
"Ignore space change" is probably helpful when viewing this diff.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pull' and 'push' subcommands deserve their own sections in the tests.
Add some basic tests for them.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a dumb test, but it's surprisingly easy to break.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7900-subtree.sh defines a helper function named last_commit_message.
However, it only returns the subject line of the commit message, not the
entire commit message. So rename it, to make the name less confusing.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as I can tell, this test isn't actually testing anything, because
someone forgot to tack on `--name-only` to `git log`. This seems to
have been the case since the test was first written, back in fa16ab36ad
("test.sh: make sure no commit changes more than one file at a time.",
2009-04-26), unless `git log` used to do that by default and didn't need
the flag back then?
Convincing myself that it's not actually testing anything was tricky,
the code is a little hard to reason about. It can be made a lot simpler
if instead of trying to parse all of the info from a single `git log`,
we're OK calling `git log` from inside of a loop. And it's my opinion
that tests are not the place for clever optimized code.
So, fix and simplify the test, so that it's actually testing something
and is simpler to reason about.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7900-subtree.sh defines its own `check_equal A B` function, instead of
just using `test A = B` like all of the other tests. Don't be special,
get rid of `check_equal` in favor of `test`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unclear what the purpose of t7900-subtree.sh's
`subtree_test_create_repo` helper function is. It wraps test-lib.sh's,
`test_create_repo` but follows that up by setting log.date=relative. Why
does it set log.date=relative?
My first guess was that at one point the tests required that, but no
longer do, and that the function is now vestigial. I even wrote a patch
to get rid of it and was moments away from `git send-email`ing it.
However, by chance when looking for something else in the history, I
discovered the true reason, from e7aac44ed2 (contrib/subtree: ignore
log.date configuration, 2015-07-21). It's testing that setting
log.date=relative doesn't break `git subtree`, as at one point in the past
that did break `git subtree`.
So, add a comment about this, to avoid future such confusion.
And while at it, go ahead and (1) touch up the function to avoid a
pointless subshell and (2) update the one test that didn't use it.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The formatting in t7900-subtree.sh isn't even consistent throughout the
file. Fix that; make it consistent throughout the file.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test-lib.sh's `test_count`, instead instead of having
t7900-subtree.sh do its own book-keeping with `subtree_test_count` that
has to be explicitly incremented by calling `next_test`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the tests had been converted to support
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`, but `contrib/subtree/t/`
hadn't.
Convert it. Most of the mentions of 'master' can just be replaced with
'HEAD'.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $subcommand case statement in _git_stash() is quite repetitive.
Consolidate the cases together into one catch-all case to reduce the
repetition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of the $__git_cmd_idx variable in e94fb44042
(git-completion.bash: pass $__git_subcommand_idx from __git_main(),
2021-03-24), completion functions were able to know the index at which
the git command is listed, allowing them to skip options that are given
to the underlying git itself, not the corresponding command (e.g.
`-C asdf` in `git -C asdf branch`).
While most of the changes here are self-explanatory, some bear further
explanation.
For the __git_find_on_cmdline() and __git_find_last_on_cmdline() pair of
functions, these functions are only ever called in the context of a git
command completion function. These functions will only care about words
after the command so we can safely ignore the words before this.
For _git_worktree(), this change is technically a no-op (once the
__git_find_last_on_cmdline change is also applied). It was in poor style
to have hard-coded on the index right after `worktree`. In case
`git worktree` were to ever learn to accept options, the current
situation would be inflexible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), the $__git_subcommand_idx variable was
introduced. Naming it after the index of the subcommand is needlessly
confusing as, when this variable is used, it is in the completion
functions for commands (e.g. _git_remote()) where for `git remote add`,
the `remote` is referred to as the command and `add` is referred to as
the subcommand.
Rename this variable so that it's obvious it's about git commands. While
we're at it, shorten up its name so that it's still readable without
being a handful to type.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), a line was introduced which contained
multiple statements. This is difficult to read so break it into multiple
lines.
While we're at it, follow this convention for the rest of the
__git_main() and break up lines that contain multiple statements.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliased command lookup accesses the `list` variable before it has been
set, causing an error in "nounset" mode. Initialize to an empty string
to avoid that.
$ git nonexistent-command <Tab>bash: list: unbound variable
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) has learned that
CHERRY_PICK_HEAD is a possible pseudo-ref.
* ab/complete-cherry-pick-head:
bash completion: complete CHERRY_PICK_HEAD
The command-line completion script (in contrib/) had a couple of
references that would have given a warning under the "-u" (nounset)
option.
* vs/completion-with-set-u:
completion: audit and guard $GIT_* against unset use
The command line completion (in contrib/) has learned that
CHERRY_PICK_HEAD is a possible pseudo-ref.
* ab/complete-cherry-pick-head:
bash completion: complete CHERRY_PICK_HEAD
The command-line completion script (in contrib/) had a couple of
references that would have given a warning under the "-u" (nounset)
option.
* vs/completion-with-set-u:
completion: audit and guard $GIT_* against unset use
Junio C Hamano
Jeff Hostetler
Elijah Newren
Đoàn Trần Công Danh
Sardorbek Imomaliev
Luke Shumaker
Denton Liu
Ville Skyttä