Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e0 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288 (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a `struct wt_status_state`, we manually free its `branch`,
`onto` and `detached_from`, or sometimes just one or two of them.
Provide a function `wt_status_state_free_buffers()` which does the
freeing.
The callers are still aware of these fields, e.g., they check whether
`branch` was populated or not. But this way, they don't need to know
about *all* of them, and if `struct wt_status_state` gets more fields,
they will not need to learn to free them.
Users of `struct wt_status` (which contains a `wt_status_state`) already
have `wt_status_collect_free_buffers()` (corresponding to
`wt_status_collect()`) which we can also teach to use this new helper.
Finally, note that we're currently leaving dangling pointers behind.
Some callers work on a stack-allocated struct, where this is obviously
ok. But for the users of `run_status()` in builtin/commit.c, there are
ample opportunities for someone to mistakenly use those dangling
pointers. We seem to be ok for now, but it's a use-after-free waiting to
happen. Let's leave NULL-pointers behind instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the early feedback of folks trying out sparse-checkouts at
$dayjob is that sparse checkouts can sometimes be disorienting; users
can forget that they had a sparse-checkout and then wonder where files
went. Add some output to 'git status' in the form of a simple line that
states:
You are in a sparse checkout with 35% of files present.
where, obviously, the exact figure changes depending on what percentage
of files from the index do not have the SKIP_WORKTREE bit set.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In dcb500dc16 (cherry-pick/revert: advise using --skip, 2019-07-02),
`git commit` learned to suggest to run `git cherry-pick --skip` when
trying to cherry-pick an empty patch.
However, it was overlooked that there are more conditions than just a
`git cherry-pick` when this advice is printed (which originally
suggested the neutral `git reset`): the same can happen during a rebase.
Let's suggest the correct command, even during a rebase.
While at it, we adjust more places in `builtin/commit.c` that
incorrectly assumed that the presence of a `CHERRY_PICK_HEAD` meant that
surely this must be a `cherry-pick` in progress.
Note: we take pains to handle the situation when a user runs a `git
cherry-pick` _during_ a rebase. This is quite valid (e.g. in an `exec`
line in an interactive rebase). On the other hand, it is not possible to
run a rebase during a cherry-pick, meaning: if both `rebase-merge/` and
`sequencer/` exist or CHERRY_PICK_HEAD and REBASE_HEAD point to the same
commit , we still want to advise to use `git cherry-pick --skip`.
Original-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add FROM_CHERRY_PICK_MULTI for a sequence of cherry-picks rather than
using a separate variable.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change struct wt_status to use struct object_id instead of an array of
unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" learned to always output the detached HEAD as
the first item (when the HEAD is detached, of course), regardless
of the locale.
* md/sort-detached-head-first:
ref-filter: sort detached HEAD lines firstly
Before this patch, "git branch" would put "(HEAD detached...)" and "(no
branch, rebasing...)" lines before all the other branches *in most
cases* except for when using Chinese-language messages. zh_CN generally
uses a full-width "(" symbol (codepoint FF08) to match the full-width
proportions of Chinese characters, and the translated strings we had did
use them. This meant that the detached HEAD line would appear after all
local refs and even after the remote refs if there were any.
AFAIK, it is sometimes not jarring to see the half-width parenthesis in
"full-width" text as in the CJK languages, for instance when there are
no characters preceding or following the parenthesized text fragment. By
removing the parenthesis from the localizable text, we can share strings
with wt-status.c and remove a cautionary comment to translators.
Remove the ( from the localizable portion of messages so the sorting
happens properly regardless of locale.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We started including stdio.h to pick up the declaration of "FILE" in
f26a001226 (Enable wt-status output to a given FILE pointer.,
2007-09-17). But there's no need, since headers can assume that
git-compat-util.h has been included, which covers stdio.
This should just be redundant, and not hurting anything (like pulling in
includes out of order) because C files are supposed to always include
git-compat-util.h first. But it's worth cleaning up to model good
behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change allows git-merge messages to be cleaned up with the
commit.cleanup configuration or --cleanup option, just like how
git-commit does it.
We also give git-pull the option of --cleanup so that it can also take
advantage of this change.
Finally, add testing to ensure that messages are properly cleaned up.
Note that some newlines that were added to the commit message were
removed so that if a file were read via -F, it would be copied
faithfully.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Status variables were initialized in the collect phase and some
variables were later freed in the print functions.
A "struct wt_status" used to be sufficient for the output phase to
work. It was designed to be filled in the collect phase and consumed
in the output phase, but over time some fields were added and output
phase started filling the fields.
A "struct wt_status_state" that was used in other codepaths turned out
to be useful in the "git status" output. This is not tied to "struct
wt_status", so filling in the collect phase was not consistently
followed.
Move the status state structure variables into the status state
structure and populate them in the collect functions.
Create a new function to free the buffers that were being freed in the
print function. Call this new function in commit.c where both the
collect and print functions were being called.
Based on a patch suggestion by Junio C Hamano. [1]
[1] https://public-inbox.org/git/xmqqr2i5ueg4.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After performing a merge that has conflicts git status will, by default,
attempt to detect renames which causes many objects to be examined. In a
virtualized repo, those objects do not exist locally so the rename logic
triggers them to be fetched from the server. This results in the status call
taking hours to complete on very large repos vs seconds with this patch.
Add a new config status.renames setting to enable turning off rename
detection during status and commit. This setting will default to the value
of diff.renames.
Add a new config status.renamelimit setting to to enable bounding the time
spent finding out inexact renames during status and commit. This setting
will default to the value of diff.renamelimit.
Add --no-renames command line option to status that enables overriding the
config setting from the command line. Add --find-renames[=<n>] command line
option to status that enables detecting renames and optionally setting the
similarity index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Original-Patch-by: Alejandro Pauly <alpauly@microsoft.com>
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the various *_sha1 members to use struct object_id instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" can spend a lot of cycles to compute the relation
between the current branch and its upstream, which can now be
disabled with "--no-ahead-behind" option.
* jh/status-no-ahead-behind:
status: support --no-ahead-behind in long format
status: update short status to respect --no-ahead-behind
status: add --[no-]ahead-behind to status and commit for V2 format.
stat_tracking_info: return +1 when branches not equal
Teach "git status" and "git commit" to accept "--no-ahead-behind"
and "--ahead-behind" arguments to request quick or full ahead/behind
reporting.
When "--no-ahead-behind" is given, the existing porcelain V2 line
"branch.ab +x -y" is replaced with a new "branch.ab +? -?" line.
This indicates that the branch and its upstream are or are not equal
without the expense of computing the full ahead/behind values.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
These field "head_path" is used for rename display only. In the next
patch we introduce another rename pair where the rename source is no
longer HEAD. Rename it to something more generic.
While at there, rename "score" as well and store the rename diff code
in a separate field instead of hardcoding key[0] (i.e. diff-index) in
porcelain v2 code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the status command more flexibility in how ignored files are
reported. Currently, the reporting of ignored files and untracked
files are linked. You cannot control how ignored files are reported
independently of how untracked files are reported (i.e. `all` vs
`normal`). This makes it impossible to show untracked files with the
`all` option, but show ignored files with the `normal` option.
This work 1) adds the ability to control the reporting of ignored
files independently of untracked files and 2) introduces the concept
of status reporting ignored paths that explicitly match an ignored
pattern. There are 2 benefits to these changes: 1) if a consumer needs
all untracked files but not all ignored files, there is a performance
benefit to not scanning all contents of an ignored directory and 2)
returning ignored files that explicitly match a path allow a consumer
to make more informed decisions about when a status result might be
stale.
This commit implements --ignored=matching with --untracked-files=all.
The following commit will implement --ignored=matching with
--untracked=files=normal.
As an example of where this flexibility could be useful is that our
application (Visual Studio) runs the status command and presents the
output. It shows all untracked files individually (e.g. using the
'--untracked-files==all' option), and would like to know about which
paths are ignored. It uses information about ignored paths to make
decisions about when the status result might have changed.
Additionally, many projects place build output into directories inside
a repository's working directory (e.g. in "bin/" and "obj/"
directories). Normal usage is to explicitly ignore these 2 directory
names in the .gitignore file (rather than or in addition to the *.obj
pattern).If an application could know that these directories are
explicitly ignored, it could infer that all contents are ignored as
well and make better informed decisions about files in these
directories. It could infer that any changes under these paths would
not affect the output of status. Additionally, there can be a
significant performance benefit by avoiding scanning through ignored
directories.
When status is set to report matching ignored files, it has the
following behavior. Ignored files and directories that explicitly
match an exclude pattern are reported. If an ignored directory matches
an exclude pattern, then the path of the directory is returned. If a
directory does not match an exclude pattern, but all of its contents
are ignored, then the contained files are reported instead of the
directory.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has long shown essentially the same message as "git
commit"; the message it gives while preparing for the root commit,
i.e. "Initial commit", was hard to understand for some new users.
Now it says "No commits yet" to stress more on the current status
(rather than the commit the user is preparing for, which is more in
line with the focus of "git commit").
* ks/status-initial-commit:
status: contextually notify user about an initial commit
The existing message, "Initial commit", makes sense for the commit template
notifying users that it's their initial commit, but is confusing when
merely checking the status of a fresh repository (or orphan branch)
without having any commits yet.
Change the output of "status" to say "No commits yet" when "git
status" is run on a fresh repo (or orphan branch), while retaining the
current "Initial commit" message displayed in the template that's
displayed in the editor when the initial commit is being authored.
Correspondingly change the output of "short status" to "No commits yet
on " when "git status -sb" is run on a fresh repo (or orphan branch).
A few alternatives considered were,
* Waiting for initial commit
* Your current branch does not have any commits
* Current branch waiting for initial commit
The most succint one among the alternatives was chosen.
[with help on tests from Ævar]
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce '--show-stash' and its configuration option 'status.showStash'
to allow git-status to show information about currently stashed entries.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 20 bytes, use the constant
GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead
of GIT_SHA1_RAWSZ. This will ease the transition down the line by
distinguishing between places where we need to allocate memory suitable
for the largest hash from those where we need to handle the current
hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we are *actually* interested in those changes... For
example when an interactive rebase wants to continue with a staged
submodule update.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They will be used in the upcoming rebase helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function used by "git pull" to stop the user when the working
tree has changes is useful in other places.
Let's move it into a more prominent (and into an actually reusable)
spot: wt-status.[ch].
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand porcelain v2 output to include branch and tracking
branch information. This includes the commit id, the branch,
the upstream branch, and the ahead and behind counts.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect extra per-file data for porcelain V2 format.
The output of `git status --porcelain` leaves out many
details about the current status that clients might like
to have. This can force them to be less efficient as they
may need to launch secondary commands (and try to match
the logic within git) to accumulate this extra information.
For example, a GUI IDE might want the file mode to display
the correct icon for a changed item (without having to stat
it afterwards).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the API between builtin/commit.c and wt-status.[ch].
Hide the details of the various wt_*status_print() routines inside
wt-status.c behind a single (new) wt_status_print() routine.
Eliminate the switch statements from builtin/commit.c.
Allow details of new status formats to be isolated within wt-status.c
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the various wt_status_print*() routines to be
wt_longstatus_print*() to make it clear that these
routines are only concerned with the normal/long
status output and reduce developer confusion as other
status formats are added in the future.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And make it work with any given worktree, in preparation for (again)
find_shared_symref(). read_and_strip_branch() is deleted because it's
no longer used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation step for find_shared_symref() to detect if any
worktree is being rebased.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree.c:find_shared_symref() later needs to know if a branch is being
rebased, and only rebase, no cherry-pick, do detached branch... Split
this code so it can be used independently from other in-progress tests.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The declaration of 'struct wt_status' requires the declararion of 'struct
pathspec'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt_status_print() is the only caller of wt_status_get_detached_from().
The latter performs most of the analysis of a detached HEAD, including
finding state->detached_from; the caller checks whether the detached
HEAD is still at state->detached_from or has moved away.
Move that last bit of analysis to wt_status_get_detached_from(), too,
and store the boolean result in state->detached_at.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --branch --porcelain" displays the status of the branch
(ahead, behind, gone), and used gettext to translate the string.
Use hardcoded strings when --porcelain is used, but keep the gettext
translation for "git status --short" which is essentially the same, but
meant to be read by a human.
Reported-by: Anarky <ghostanarky@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the '-v' option of "git commit" the diff added to the commit
message temporarily for editing is stripped off after the user exited the
editor by searching for "\ndiff --git " and truncating the commmit message
there if it is found.
But this approach has two problems:
- when the commit message itself contains a line starting with
"diff --git" it will be truncated there prematurely; and
- when the "diff.submodule" setting is set to "log", the diff may
start with "Submodule <hash1>..<hash2>", which will be left in
the commit message while it shouldn't.
Fix that by introducing a special scissor separator line starting with the
comment character ('#' or the core.commentChar config if set) followed by
two lines describing what it is for. The scissor line - which will not be
translated - is used to reliably detect the start of the diff so it can be
chopped off from the commit message, no matter what the user enters there.
Turn a known test failure fixed by this change into a successful test;
also add one for a diff starting with a submodule log and another one for
proper handling of the comment char.
Reported-by: Ari Pollak <ari@debian.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the commit log template, remove irrelevant "advice" messages
that are shared with "git status" output.
* mm/commit-template-squelch-advice-messages:
commit: disable status hints when writing to COMMIT_EDITMSG
wt-status: turn advice_status_hints into a field of wt_status
commit: factor status configuration is a helper function
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
No behavior change in this patch, but this makes the display of status
hints more flexible as they can be enabled or disabled for individual
calls to commit.c:run_status().
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.
Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.
Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason
Martin Ågren
Elijah Newren
Phillip Wood
brian m. carlson
Junio C Hamano
Matthew DeVore
Jeff King
Denton Liu
Nguyễn Thái Ngọc Duy
Stephen P. Smith
Ben Peart
Jeff Hostetler
Jameson Miller
Kaartic Sivaraam
Liam Beguin
Brian Malehorn
Johannes Schindelin
SZEDER Gábor
Michael J Gruber
Matthieu Moy
Jens Lehmann
Ralf Thielow