In some setups, packfile uris act as bearer token. It is not
recommended to expose them plainly in logs, although in special
circunstances (e.g. debug) it makes sense to write them.
Redact the packfile URL paths by default, unless the GIT_TRACE_REDACT
variable is set to false. This mimics the redacting of the Authorization
header in HTTP.
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in 4981fe750b (pkt-line: share
buffer/descriptor reading implementation, 2013-02-23), but in
01f9ec64c8 (Use packet_reader instead of packet_read_line,
2018-12-29) the code that was using it was removed.
Since it's being removed we can in turn remove the "src" and "src_len"
arguments to packet_read(), all the remaining users just passed a
NULL/NULL pair to it.
That function is only a thin wrapper for packet_read_with_status()
which still needs those arguments, but for the thin packet_read()
convenience wrapper we can do away with it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in f1f4d8acf4 (pkt-line: add
packet_buf_write_len function, 2018-03-15) for use in
0f1dc53f45 (remote-curl: implement stateless-connect command,
2018-03-15).
In a97d00799a (remote-curl: use post_rpc() for protocol v2 also,
2019-02-21) that only user of it went away, let's remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds three new functions to pkt-line.c: packet_fwrite,
packet_fwrite_fmt and packet_fflush. Besides writing a pktline flush
packet, packet_fflush also flushes the stdio buffer of the stream.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0181b600a6 (pkt-line: define PACKET_READ_RESPONSE_END, 2020-05-19),
the Response End packet was defined for Git's network protocol. When the
patch was sent, it included an oversight where the error messages
referenced "stateless separator", the work-in-progress name, over
"response end", the final name chosen.
Correct these error messages by having them correctly reference
a "response end" packet.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On write() errors, packet_write() dies with the same error message that
is already printed by its callee, packet_write_gently(). This produces
an unnecessarily verbose and repetitive output:
error: packet write failed
fatal: packet write failed: <strerror() message>
In addition to that, packet_write_gently() does not always fulfill its
caller expectation that errno will be properly set before a non-zero
return. In particular, that is not the case for a "data exceeds max
packet size" error. So, in this case, packet_write() will call
die_errno() and print an strerror(errno) message that might be totally
unrelated to the actual error.
Fix both those issues by turning packet_write() and
packet_write_gently() into wrappers to a common lower level function
that doesn't print the error message, but instead returns it on a buffer
for the caller to die() or error() as appropriate.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the calling sequence of `read_packetized_to_strbuf()` to take
an options argument and not assume a fixed set of options. Update the
only existing caller accordingly to explicitly pass the
formerly-assumed flags.
The `read_packetized_to_strbuf()` function calls `packet_read()` with
a fixed set of assumed options (`PACKET_READ_GENTLE_ON_EOF`). This
assumption has been fine for the single existing caller
`apply_multi_file_filter()` in `convert.c`.
In a later commit we would like to add other callers to
`read_packetized_to_strbuf()` that need a different set of options.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce PACKET_READ_GENTLE_ON_READ_ERROR option to help libify the
packet readers.
So far, the (possibly indirect) callers of `get_packet_data()` can ask
that function to return an error instead of `die()`ing upon end-of-file.
However, random read errors will still cause the process to die.
So let's introduce an explicit option to tell the packet reader
machinery to please be nice and only return an error on read errors.
This change prepares pkt-line for use by long-running daemon processes.
Such processes should be able to serve multiple concurrent clients and
and survive random IO errors. If there is an error on one connection,
a daemon should be able to drop that connection and continue serving
existing and future connections.
This ability will be used by a Git-aware "Builtin FSMonitor" feature
in a later patch series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `packet_flush_gently()` call in `write_packetized_from_buf() and
`write_packetized_from_fd()` and require the caller to call it if desired.
Rename both functions to `write_packetized_from_*_no_flush()` to prevent
later merge accidents.
`write_packetized_from_buf()` currently only has one caller:
`apply_multi_file_filter()` in `convert.c`. It always wants a flush packet
to be written after writing the payload.
However, we are about to introduce a caller that wants to write many
packets before a final flush packet, so let's make the caller responsible
for emitting the flush packet.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `packet_write_gently()` to write the pkt-line header and the actual
buffer in 2 separate calls to `write_in_full()` and avoid the need for a
static buffer, thread-safe scratch space, or an excessively large stack
buffer.
Change `write_packetized_from_fd()` to allocate a temporary buffer rather
than using a static buffer to avoid similar issues here.
These changes are intended to make it easier to use pkt-line routines in
a multi-threaded context with multiple concurrent writers writing to
different streams.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In demultiplex_sideband(), there are two oddities when we check an
incoming packet:
- if it has zero length, then we assume it's a flush packet. This
means we fail to notice the difference between a real flush and a
true zero-length packet that's missing its sideband designator. It's
not a huge problem in practice because we'd never send a zero-length
data packet (even our keepalives are otherwise-empty sideband-1
packets).
But it would be nice to detect and report the error, since it's
likely to cause other confusion (we think the other side flushed,
but they do not).
- we try to detect packets missing their designator by checking for
"if (len < 1)". But this will never trigger for "len == 0"; we've
already detected that and left the function before then.
It _could_ detect a negative "len" parameter. But in that case, the
error message is wrong. The issue is not "no sideband" but rather
"eof while reading the packet". However, this can't actually be
triggered in practice, because neither of the two callers uses
pkt_read's GENTLE_ON_EOF flag. Which means they'd die with "the
remote end hung up unexpectedly" before we even get here.
So this truly is dead code.
We can improve these cases by passing in a pkt-line status to the
demultiplexer, and by having recv_sideband() use GENTLE_ON_EOF. This
gives us two improvements:
- we can now reliably detect flush packets, and will report a normal
packet missing its sideband designator as an error
- we'll report an eof with a more detailed "protocol error: eof while
reading sideband packet", rather than the generic "the remote end
hung up unexpectedly"
- when we see an eof, we'll flush the sideband scratch buffer, which
may provide some hints from the remote about why they hung up
(though note we already flush on newlines, so it's likely that most
such messages already made it through)
In some sense this patch goes against fbd76cd450 (sideband: reverse its
dependency on pkt-line, 2019-01-16), which caused the sideband code not
to depend on the pkt-line code. But that commit was really just trying
to deal with the circular header dependency. The two modules are
conceptually interlinked, and it was just trying to keep things
compiling. And indeed, there's a sticking point in this patch: because
pkt-line.h includes sideband.h, we can't add the reverse include we need
for the sideband code to have an "enum packet_read_status" parameter.
Nor can we forward declare it, because you can't forward declare an enum
in C. However, C does guarantee that enums fit in an int, so we can just
use that type.
One alternative would be for the callers to check themselves that they
got something sane from the pkt-line code. But besides duplicating
logic, this gets quite tricky. Any error condition requires flushing the
sideband #2 scratch buffer, which only demultiplex_sideband() knows how
to do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was pretty tricky to verify that incomplete sideband messages are
handled correctly by the `recv_sideband()`/`demultiplex_sideband()`
code: they have to be flushed out at the end of the loop in
`recv_sideband()`, but the actual flushing is done by the
`demultiplex_sideband()` function (which therefore has to know somehow
that the loop will be done after it returns).
To catch future bugs where incomplete sideband messages might not be
shown by mistake, let's catch that condition and report a bug.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
Add a member for the hash algorithm currently in use to the packet
reader so it can parse references correctly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future commit, we will use PACKET_READ_RESPONSE_END to separate
messages proxied by remote-curl. To prepare for this, add the
PACKET_READ_RESPONSE_END enum value.
In switch statements that need a case added, die() or BUG() when a
PACKET_READ_RESPONSE_END is unexpected. Otherwise, mirror how
PACKET_READ_DELIM is implemented (especially in cases where packets are
being forwarded).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future commit, we will be manually processing packets and we will
need to access the length header. In order to simplify this, extern
packet_length() so that the logic can be reused.
Change the function parameter from `const char *linelen` to
`const char lenbuf_hex[4]`. Even though these two types behave
identically as function parameters, use the array notation to
semantically indicate exactly what this function is expecting as an
argument. Also, rename it from linelen to lenbuf_hex as the former
sounds like it should be an integral type which is misleading.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function's definition has a paramter of type "int" qualified as
"const". The fact that the incoming parameter is used as read-only
in the fuction is an implementation detail that the callers should
not have to be told in the prototype declaring it (and "const" there
has no effect, as C passes parameters by value).
The prototype defined for the function in pkt-line.h lacked the
matching "const" for this reason, but apparently some compilers
(e.g. MS Visual C 2017) complain about the parameter type mismatch.
Let's squelch it by removing the "const" that is pointless in the
definition of a small and trivial function like this, which would
not help optimizing compilers nor reading humans that much.
Noticed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 2d103c31c2 (pack-protocol.txt: accept error packets in any
context, 2018-12-29), the pktline code will detect an ERR packet and die
automatically, saving the caller from dealing with it. But we do so too
early in the function, before we have terminated the buffer with a NUL.
As a result, passing the ERR message to die() may result in us printing
random cruft from a previous packet. This doesn't trigger memory tools
like ASan because we reuse the same buffer over and over (so the
contents are valid and initialized; they're just stale).
We can see demonstrate this by tightening the regex we use to match the
error message in t5516; without this patch, git-fetch will accidentally
print the capabilities from the (much longer) initial packet we
received.
By moving the ERR code later in the function we get a few other
benefits, too:
- we'll now chomp any newline sent by the other side (which is what we
want, since die() will add its own newline)
- we'll now mention the ERR packet with GIT_TRACE_PACKET
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms where "git fetch" is killed with SIGPIPE (e.g. OSX),
the upload-pack that runs on the other end that hangs up after
detecting an error could cause "git fetch" to die with a signal,
which led to a flakey test. "git fetch" now ignores SIGPIPE during
the network portion of its operation (this is not a problem as we
check the return status from our write(2)s).
* jk/no-sigpipe-during-network-transport:
fetch: ignore SIGPIPE during network operation
fetch: avoid calling write_or_die()
The write_or_die() function has one quirk that a caller might not
expect: when it sees EPIPE from the write() call, it translates that
into a death by SIGPIPE. This doesn't change the overall behavior (the
program exits either way), but it does potentially confuse test scripts
looking for a non-signal exit code.
Let's switch away from using write_or_die() in a few code paths, which
will give us more consistent exit codes. It also gives us the
opportunity to write more descriptive error messages, since we have
context that write_or_die() does not.
Note that this won't do much by itself, since we'd typically be killed
by SIGPIPE before write_or_die() even gets a chance to do its thing.
That will be addressed in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When transmitting and receiving POSTs for protocol v0 and v1,
remote-curl uses post_rpc() (and associated functions), but when doing
the same for protocol v2, it uses a separate set of functions
(proxy_rpc() and others). Besides duplication of code, this has caused
at least one bug: the auth retry mechanism that was implemented in v0/v1
was not implemented in v2.
To fix this issue and avoid it in the future, make remote-curl also use
post_rpc() when handling protocol v2. Because line lengths are written
to the HTTP request in protocol v2 (unlike in protocol v0/v1), this
necessitates changes in post_rpc() and some of the functions it uses;
perform these changes too.
A test has been included to ensure that the code for both the unchunked
and chunked variants of the HTTP request is exercised.
Note: stateless_connect() has been updated to use the lower-level packet
reading functions instead of struct packet_reader. The low-level control
is necessary here because we cannot change the destination buffer of
struct packet_reader while it is being used; struct packet_buffer has a
peeking mechanism which relies on the destination buffer being present
in between a peek and a read.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a response to a fetch request has sideband support only while
the packfile is being sent, meaning that the server cannot send notices
until the start of the packfile.
Extend sideband support in protocol v2 fetch responses to the whole
response. upload-pack will advertise it if the
uploadpack.allowsidebandall configuration variable is set, and
fetch-pack will automatically request it if advertised.
If the sideband is to be used throughout the whole response, upload-pack
will use it to send errors instead of prefixing a PKT-LINE payload with
"ERR ".
This will be tested in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will teach struct packet_reader a new field that, if
set, instructs it to interpret read data as multiplexed. This will
create a dependency from pkt-line to sideband.
To avoid a circular dependency, split recv_sideband() into 2 parts: the
reading loop (left in recv_sideband()) and the processing of the
contents (in demultiplex_sideband()), and move the former into pkt-line.
This reverses the direction of dependency: sideband no longer depends on
pkt-line, and pkt-line now depends on sideband.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch will allow the client to request multiplexing of the
entire fetch response (and not only during packfile transmission), which
in turn allows the server to send progress and keepalive messages at any
time during the response.
It will be convenient for a future patch if writing options
(specifically, whether the written data is to be multiplexed) could be
controlled from a single place, so create struct packet_writer to serve
as that place, and modify upload-pack to use it.
Currently, it only stores the output fd, but a subsequent patch will (as
described above) introduce an option to determine if the written data is
to be multiplexed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'packet_buf_write_len()' function which allows for writing an
arbitrary length buffer into a 'struct strbuf' and formatting it in
packet-line format.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the design goals of protocol-v2 is to improve the semantics of
flush packets. Currently in protocol-v1, flush packets are used both to
indicate a break in a list of packet lines as well as an indication that
one side has finished speaking. This makes it particularly difficult
to implement proxies as a proxy would need to completely understand git
protocol instead of simply looking for a flush packet.
To do this, introduce the special deliminator packet '0001'. A delim
packet can then be used as a deliminator between lists of packet lines
while flush packets can be reserved to indicate the end of a response.
Documentation for how this packet will be used in protocol v2 will
included in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is advantageous to be able to peek the next packet line
without consuming it (e.g. to be able to determine the protocol version
a server is speaking). In order to do that introduce 'struct
packet_reader' which is an abstraction around the normal packet reading
logic. This enables a caller to be able to peek a single line at a time
using 'packet_reader_peek()' and having a caller consume a line by
calling 'packet_reader_read()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current pkt-line API encodes the status of a pkt-line read in the
length of the read content. An error is indicated with '-1', a flush
with '0' (which can be confusing since a return value of '0' can also
indicate an empty pkt-line), and a positive integer for the length of
the read content otherwise. This doesn't leave much room for allowing
the addition of additional special packets in the future.
To solve this introduce 'packet_read_with_status()' which reads a packet
and returns the status of the read encoded as an 'enum packet_status'
type. This allows for easily identifying between special and normal
packets as well as errors. It also enables easily adding a new special
packet in the future.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new mechanism to upgrade the wire protocol in place is proposed
and demonstrated that it works with the older versions of Git
without harming them.
* bw/protocol-v1:
Documentation: document Extra Parameters
ssh: introduce a 'simple' ssh variant
i5700: add interop test for protocol transition
http: tell server that the client understands v1
connect: tell server that the client understands v1
connect: teach client to recognize v1 server response
upload-pack, receive-pack: introduce protocol version 1
daemon: recognize hidden request arguments
protocol: introduce protocol extension mechanisms
pkt-line: add packet_write function
connect: in ref advertisement, shallows are last
Add a function which can be used to write the contents of an arbitrary
buffer. This makes it easy to build up data in a buffer before writing
the packet instead of formatting the entire contents of the packet using
'packet_write_fmt()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comparing the result of read_in_full() using less-than is
potentially dangerous, as a negative return value may be
converted to an unsigned type and be considered a success.
This is discussed further in 561598cfcf (read_pack_header:
handle signed/unsigned comparison in read result,
2017-09-13).
Each of these instances is actually fine in practice:
- in get-tar-commit-id, the HEADERSIZE macro expands to a
signed integer. If it were switched to an unsigned type
(e.g., a size_t), then it would be a bug.
- the other two callers check for a short read only after
handling a negative return separately. This is a fine
practice, but we'd prefer to model "!=" as a general
rule.
So all of these cases can be considered cleanups and not
actual bugfixes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
As with the previous two commits, we prefer to check
write_in_full()'s return value to see if it is negative,
rather than comparing it to the input length.
These cases actually flip the logic to check for success,
making conversion a little different than in other cases. We
could of course write:
if (write_in_full(...) >= 0)
return 0;
return error(...);
But our usual method of spelling write() error checks is
just "< 0". So let's flip the logic for each of these
conditionals to our usual style.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The static-ness was silently dropped in commit 70428d1a5 ("pkt-line: add
packet_write_fmt_gently()", 2016-10-16). As a result, for each call to
packet_write_fmt_1, we allocate and leak a buffer.
We could keep the strbuf non-static and instead make sure we always
release it before returning (but not before we die, so that we don't
touch errno). That would also prepare us for threaded use. But until
that needs to happen, let's just restore the static-ness so that we get
back to a situation where we (eventually) do not continuosly keep
allocating memory.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor, into a common function, the version and capability negotiation
done when invoking a long-running process as a clean or smudge filter.
This will be useful for other Git code that needs to interact similarly
with a long-running process.
As you can see in the change to t0021, this commit changes the error
message reported when the long-running process does not introduce itself
with the expected "server"-terminated line. Originally, the error
message reports that the filter "does not support filter protocol
version 2", differentiating between the old single-file filter protocol
and the new multi-file filter protocol - I have updated it to something
more generic and useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add packet_writel() which writes multiple lines in a single call and
then calls packet_flush_gently(). Update convert.c to use the new
packet_writel() function from pkt-line.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add packet_read_line_gently() to enable reading a line without dying on
EOF.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update packet_read_line() to test for len > 0 to avoid potential bug
if read functions return lengths less than zero to indicate errors.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Found/Fixed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_packetized_from_fd() and write_packetized_from_buf() write a
stream of packets. All content packets use the maximal packet size
except for the last one. After the last content packet a `flush` control
packet is written.
read_packetized_to_strbuf() reads arbitrary sized packets until it
detects a `flush` packet.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_write_fmt_gently() uses format_packet() which lets the caller
only send string data via "%s". That means it cannot be used for
arbitrary data that may contain NULs.
Add packet_write_gently() which writes arbitrary data and does not die
in case of an error. The function is used by other pkt-line functions in
a subsequent patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_flush() would die in case of a write error even though for some
callers an error would be acceptable. Add packet_flush_gently() which
writes a pkt-line flush packet like packet_flush() but does not die in
case of an error. The function is used in a subsequent patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
packet_write_fmt() would die in case of a write error even though for
some callers an error would be acceptable. Add packet_write_fmt_gently()
which writes a formatted pkt-line like packet_write_fmt() but does not
die in case of an error. The function is used in a subsequent patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ivan Frade
Junio C Hamano
Ævar Arnfjörð Bjarmason
Jacob Vosmaer
Denton Liu
Matheus Tavares
Johannes Schindelin
Jeff Hostetler
Jeff King
brian m. carlson
Jonathan Tan
Masaya Suzuki
Nguyễn Thái Ngọc Duy
Brandon Williams
Martin Ågren
Ben Peart
Lars Schneider