The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
The old address is still present in t/diff-lib/COPYING. This is
intentional, as the file is used in tests and the contents are not
expected to change.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The illustrated history used to explain the `--fork-point` mode
named three keypoint commits B3, B2 and B1 from the oldest to the
newest, which was hard to read. Relabel them to B0, B1, B2. Also
illustrate the history after the rebase using the `--fork-point`
facility was made.
The text already mentions use of reflog, but the description is not
clear what benefit we are trying to gain by using reflog. Clarify
that it is to find the commits that were known to be at the tip of
the remote-tracking branch. This in turn necessitates users to know
the ramifications of the underlying assumptions, namely, expiry of
reflog entries will make it impossible to determine which commits
were at the tip of the remote-tracking branches and we fail when in
doubt (instead of giving a random and incorrect result without even
warning). Another limitation is that it won't be useful if you did
not fork from the tip of a remote-tracking branch but from in the
middle.
Describe them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have seven callers of `reduce_heads(foo)`. Six of them do
not use the original list `foo` again, and actually, all six of those
end up leaking it.
Introduce and use `reduce_heads_replace(&foo)` as a leak-free version of
`foo = reduce_heads(foo)` to fix several of these. Fix the remaining
leaks using `free_commit_list()`.
While we're here, document `reduce_heads()` and mark it as `extern`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In several functions, we iterate through a commit list by assigning
`result = result->next`. As a consequence, we lose the original pointer
and eventually leak the list.
Rewrite the loops so that we keep the original pointers, then call
`free_commit_list()`. Various alternatives were considered:
1) Use `UNLEAK(result)` before the loop. Simple change, but not very
pretty. These would definitely be new lows among our usages of UNLEAK.
2) Use `pop_commit()` when looping. Slightly less simple change, but it
feels slightly preferable to first display the list, then free it.
3) As in this patch, but with `UNLEAK()` instead of freeing. We'd still
go through all the trouble of refactoring the loop, and because it's not
super-obvious that we're about to exit, let's just free the lists -- it
probably doesn't affect the runtime much.
In `handle_independent()` we can drop `result` while we're here and
reuse the `revs`-variable instead. That matches several other users of
`reduce_heads()`. The memory-leak that this hides will be addressed in
the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, the fetch process seems hanged while we fetch page
listings across the namespaces. Obviously, it should be possible to
silence this with -q, but that's an issue already present everywhere
in the code and should be fixed separately:
https://github.com/Git-Mediawiki/Git-Mediawiki/issues/30
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, we'd process them in numeric order since that is more
logical, but we can't do that yet since this is where we find the
numeric identifiers in the first place. Lexicographic order is a good
compromise.
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we specify a list of namespaces to fetch from, by default the MW
API will not fetch from the default namespace, refered to as "(Main)"
in the documentation:
https://www.mediawiki.org/wiki/Manual:Namespace#Built-in_namespaces
I haven't found a way to address that "(Main)" namespace when getting
the namespace ids: indeed, when listing namespaces, there is no
"canonical" field for the main namespace, although there is a "*"
field that is set to "" (empty). So in theory, we could specify the
empty namespace to get the main namespace, but that would make
specifying namespaces harder for the user: we would need to teach
users about the "empty" default namespace. It would also make the code
more complicated: we'd need to parse quotes in the configuration.
So we simply override the query here and allow the user to specify
"(Main)" since that is the publicly documented name.
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Virtual namespaces do not correspond to pages in the database and are
automatically generated by MediaWiki. It makes little sense,
therefore, to fetch pages from those namespaces and the MW API doesn't
support listing those pages.
According to the documentation, those virtual namespaces are currently
"Special" (-1) and "Media" (-2) but we treat all negative namespaces
as "virtual" as a future-proofing mechanism.
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we fail to find a requested namespace, we should tell the user
which ones we know about, since those were already fetched. This
allows users to fetch all namespaces by specifying a dummy namespace,
failing, then copying the list of namespaces in the config.
Eventually, we should have a flag that allows fetching all namespaces
automatically.
Reviewed-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is code in post_read_index_from() to catch out of order
entries when reading an index file. This order verification is ~13%
of the cost of every call to read_index_from().
Update check_ce_order() so that it skips this verification unless
the "verify_ce_order" global variable is set.
Teach fsck to force this verification.
The effect can be seen using t/perf/p0002-read-cache.sh:
Test HEAD HEAD~1
--------------------------------------------------------------------------------------
0002.1: read_cache/discard_cache 1000 times 0.41(0.04+0.04) 0.50(0.00+0.10) +22.0%
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This not only prevents regressions, but also serves as documentation
what this new feature is expected to do.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are times when scripts want to know not only the name of the
push branch on the remote, but also the name of the branch as known
by the remote repository.
An example of this is when a tool wants to push to the very same branch
from which it would pull automatically, i.e. the `<remote>` and the `<to>`
in `git push <remote> <from>:<to>` would be provided by
`%(upstream:remotename)` and `%(upstream:remoteref)`, respectively.
This patch offers the new suffix :remoteref for the `upstream` and `push`
atoms, allowing to show exactly that. Example:
$ cat .git/config
...
[remote "origin"]
url = https://where.do.we.come/from
fetch = refs/heads/*:refs/remote/origin/*
[branch "master"]
remote = origin
merge = refs/heads/master
[branch "develop/with/topics"]
remote = origin
merge = refs/heads/develop/with/topics
...
$ git for-each-ref \
--format='%(push) %(push:remoteref)' \
refs/heads
refs/remotes/origin/master refs/heads/master
refs/remotes/origin/develop/with/topics refs/heads/develop/with/topics
Signed-off-by: J Wyman <jwyman@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the commonalities from test_submodule_switch() and
test_submodule_forced_switch() in lib-submodule-update.sh, and document
their usage.
This also makes explicit (through the KNOWN_FAILURE_FORCED_SWITCH_TESTS
variable) the fact that, currently, all functionality tested using
test_submodule_forced_switch() do not correctly handle the situation in
which a submodule is replaced with an ordinary directory.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --ignore-cr-at-eol tells the diff machinery to treat a
carriage-return at the end of a (complete) line as if it does not
exist.
Just like other "--ignore-*" options to ignore various kinds of
whitespace differences, this will help reviewing the real changes
you made without getting distracted by spurious CRLF<->LF conversion
made by your editor program.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
[jch: squashed in command line completion by Dscho]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ff6f1f564 (submodule-config: lazy-load a repository's .gitmodules
file, 2017-08-03) rebase interactive fails if there are any submodules
with unstaged changes which have been configured with a value for
'submodule.<name>.ignore' in the repository's config.
This is due to how configured values of 'submodule.<name>.ignore' are
handled in addition to a change in how the submodule config is loaded.
When the diff machinery hits a submodule (gitlink as well as a
corresponding entry in the submodule subsystem) it will read the value
of 'submodule.<name>.ignore' stored in the repository's config and if
the config is present it will clear the 'IGNORE_SUBMODULES' (which is
the flag explicitly requested by rebase interactive),
'IGNORE_UNTRACKED_IN_SUBMODULES', and 'IGNORE_DIRTY_SUBMODULES' diff
flags and then set one of them based on the configured value.
Historically this wasn't a problem because the submodule subsystem
wasn't initialized because the .gitmodules file wasn't explicitly loaded
by the rebase interactive command. So when the diff machinery hit a
submodule it would skip over reading any configured values of
'submodule.<name>.ignore'.
In order to preserve the behavior of submodules being ignored by rebase
interactive, also set the 'OVERRIDE_SUBMODULE_CONFIG' diff flag when
submodules are requested to be ignored when checking for unstaged
changes.
Reported-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And while at it let's simplify t0021/rot13-filter.pl by
using Git/Packet.pm.
This will make it possible to reuse packet related
functions in other test scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These function help read and write capabilities.
To make them more generic and make it easy to reuse them,
the following changes are made:
- we don't require capabilities to come in a fixed order,
- we allow duplicates,
- we check that the remote supports the capabilities we
advertise,
- we don't check if the remote declares any capability we
don't know about.
The reason behind the last change is that the protocol
should work using only the capabilities that both ends
support, and it should not stop working if one end starts
to advertise a new capability.
Despite those changes, we can still require a set of
capabilities, and die if one of them is not supported.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As checking for a lf character at the end of a buffer
will be useful in another function, let's refactor this
functionality into a small remove_final_lf_or_die()
helper function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor the code to initialize communication into its own
packet_initialize() function, so that we can reuse this
functionality in following patches.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is no new line at the end of something it receives,
the packet_txt_read() function die()s, but it's difficult to
debug without much context.
Let's give a bit more information when that happens.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before further refactoring the "t0021/rot13-filter.pl" script,
let's modernize the style of its 'if .. elsif .. else' clauses
to improve its readability by making it more similar to our
other perl scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible in a following commit to move packet
reading and writing functions into a Packet.pm module,
let's refactor these functions, so they don't handle
printing debug output and exiting.
While at it let's create packet_required_key_val_read()
to still handle erroring out in a common case.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since edcc8581 ("convert: add filter.<driver>.process
option", 2016-10-16) when t0021/rot13-filter.pl was created, list
comparison in this perl script have been quite broken.
packet_txt_read() returns a 2-element list, and the right hand
side of "eq" also has a list with (two, elements), but "eq" takes
the last element of the list on each side, and compares them. The
first elements (0 or 1) on the right hand side lists do not matter,
which means we do not require to see a flush at the end of the
version -- a simple empty string or an EOF would do, which is
definitely not what we want.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
we still want to use spaces as separators in the config, but we should
allow the user to specify namespaces with spaces, so we use underscore
for this.
Reviewed-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new remote.origin.namespaces argument that is a
space-separated list of namespaces. The list of pages extract is then
taken from all the specified namespaces.
Reviewed-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" has been deprecated in favour of "git stash push".
* tg/deprecate-stash-save:
stash: remove now superfluos help for "stash push"
stash: mark "git stash save" deprecated in the man page
stash: replace "git stash save" with "git stash push" in the documentation
"gitweb" checks if a directory is searchable with Perl's "-x"
operator, which can be enhanced by using "filetest 'access'"
pragma, which now we do.
* gc/gitweb-filetest-acl:
gitweb: use filetest to allow ACLs
The "--push-option=<string>" option to "git push" now defaults to a
list of strings configured via push.pushOption variable.
* mp/push-pushoption-config:
builtin/push.c: add push.pushOption config
"git fetch --recurse-submodules" now knows that submodules can be
moved around in the superproject in addition to getting updated,
and finds the ones that need to be fetched accordingly.
* hv/fetch-moved-submodules-on-demand:
submodule: simplify decision tree whether to or not to fetch
implement fetching of moved submodules
fetch: add test to make sure we stay backwards compatible
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
Pathspec-limited revision traversal was taught not to keep finding
unneeded differences once it knows two trees are different inside
given pathspec.
* jk/revision-pruning-optim:
revision: quit pruning diff more quickly when possible
Optimize the code to find shortest unique prefix of object names.
* ds/find-unique-abbrev-optim:
sha1_name: minimize OID comparisons during disambiguation
sha1_name: parse less while finding common prefix
sha1_name: unroll len loop in find_unique_abbrev_r()
p4211-line-log.sh: add log --online --raw --parents perf test
"git pull" has been taught to accept "--[no-]signoff" option and
pass it down to "git merge".
* wk/pull-signoff:
pull: pass --signoff/--no-signoff to "git merge"
GSoC.
* pc/submodule-helper:
submodule: port submodule subcommand 'status' from shell to C
submodule--helper: introduce for_each_listed_submodule()
submodule--helper: introduce get_submodule_displaypath()
An early part of piece-by-piece rewrite of "git bisect".
* pb/bisect-helper:
bisect--helper: `is_expected_rev` & `check_expected_revs` shell function in C
t6030: explicitly test for bisection cleanup
bisect--helper: `bisect_clean_state` shell function in C
bisect--helper: `write_terms` shell function in C
bisect--helper: rewrite `check_term_format` shell function in C
bisect--helper: use OPT_CMDMODE instead of OPT_BOOL
A hook script that is set unexecutable is simply ignored. Git
notifies when such a file is ignored, unless the message is
squelched via advice.ignoredHook configuration.
* dm/run-command-ignored-hook-advise:
run-command: add hint when a hook is ignored
The most notable change is that we no longer take "git add ''" and
add everything. An empty string is now an error when used as a
pathspec element.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final step to make an empty string as a pathspec element
illegal. We started this by first deprecating and warning a
pathspec that has such an element in 2.11 (Nov 2016).
Hopefully we can merge this down to the 'master' by the end of the
year? A deprecation warning period that is about 1 year does not
sound too bad.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: die on empty strings as pathspec
t0027: do not use an empty string as a pathspec element
A recent regression in "git rebase -i" that broke execution of git
commands from subdirectories via "exec" insn has been fixed.
* jk/rebase-i-exec-gitdir-fix:
sequencer: pass absolute GIT_DIR to exec commands
A broken access to object databases in recent update to "git grep
--recurse-submodules" has been fixed.
* bw/grep-recurse-submodules:
grep: take the read-lock when adding a submodule
We try to see if somebody runs our test suite with a shell that
does not support "local" like bash/dash does.
* mh/test-local-canary:
t0000: check whether the shell supports the "local" keyword
Junio C Hamano
Todd Zullinger
Adam Dinwoodie
Martin Ågren
Antoine Beaupré
Ben Peart
Johannes Schindelin
J Wyman
Jonathan Tan
Brandon Williams
Christian Couder
Ingo Ruhnke
Kevin