In 1af265f0 (compat/bswap.h: simplify MSVC endianness
detection, 2020-11-08) we attempted to simplify code by assuming MSVC
builds will be for little-endian machines, since only unusably old
versions of MSVC supported big-endian MIPS and m68k architectures.
However, it's possible that MSVC could be ported to build for a
big-endian architecture again, so the simplification wasn't as
future-proof as hoped.
So let's go back to the old way of detecting MSVC, and then checking
architecture from a list of little-endian architecture macros.
Note that MSVC does not treat ARM64 as bi-endian, so we can safely treat
it as little-endian.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Daniel Gurney <dgurney99@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test added by the previous commit can be simplified a lot.
Let's do so.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 610e2b9240 (blame: validate and peel the object names on the
ignore list, 2020-09-24) git blame reports checks if objects specified
with --ignore-rev and in files loaded with --ignore-revs-file and config
option blame.ignoreRevsFile are actual objects and dies if they aren't.
The intent is to report typos to the user.
This also breaks the ability to use a single ignore file for multiple
repositories. Typos are presumably less likely in files than on the
command line, so alerting is less useful here. Restore that feature by
skipping non-commits without dying.
Reported-by: Jean-Yves Avenard <jyavenard@mozilla.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5411:
t5411: finish preparing for `main` being the default branch name
t5411: adjust the remaining support files for init.defaultBranch=main
t5411: start adjusting the support files for init.defaultBranch=main
t5411: start using the default branch name "main"
The code to detect premature EOF in the sideband demultiplexer has
been cleaned up.
* jk/sideband-more-error-checking:
sideband: diagnose more sideband anomalies
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
A commit and tag object may have CR at the end of each and
every line (you can create such an object with hash-object or
using --cleanup=verbatim to decline the default clean-up
action), but it would make it impossible to have a blank line
to separate the title from the body of the message. Be lenient
and accept a line with lone CR on it as a blank line, too.
* pb/ref-filter-with-crlf:
log, show: add tests for messages containing CRLF
ref-filter: handle CRLF at end-of-line more gracefully
"git checkout-index" did not consistently signal an error with its
exit status.
* jk/checkout-index-errors:
checkout-index: propagate errors to exit code
checkout-index: drop error message from empty --stage=all
"git diff" and other commands that share the same machinery to
compare with working tree files have been taught to take advantage
of the fsmonitor data when available.
* nk/diff-files-vs-fsmonitor:
p7519-fsmonitor: add a git add benchmark
p7519-fsmonitor: refactor to avoid code duplication
perf lint: add make test-lint to perf tests
t/perf: add fsmonitor perf test for git diff
t/perf/p7519-fsmonitor.sh: warm cache on first git status
t/perf/README: elaborate on output format
fsmonitor: use fsmonitor data in `git diff`
More preliminary tests have been added to document desired outcome
of various "directory rename" situations.
* en/dir-rename-tests:
t6423: more involved rules for renaming directories into each other
t6423: update directory rename detection tests with new rule
t6423: more involved directory rename test
directory-rename-detection.txt: update references to regression tests
This patch will let the new `check-whitespace` GitHub workflow be happy
with the upcoming patch series that wants to search-and-replace `master`
with `main` in t9603 and some other test scripts.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two blocks in t5570 want to align the closing double quotes, padding
with spaces if needed. Since the maximum length of those lines is
defined by the branch name `master`, the upcoming rename to `main` would
unalign the quotes.
But then, it is unclear how those aligned closing quotes should help
readability anyway, so let's just remove that padding altogether.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch actually prepares for the upcoming patches to replace
`master` with `main` in these tests: we do not want those changes to be
flagged by the new `check-whitespace` GitHub workflow (even if those
changes do not introduce the whitespace issues, they touch lines
affected by those issues without fixing them).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b6211b89eb3 (tests: avoid variations of the `master` branch name,
2020-09-26), the `master[123]` branch names were renamed to
`topic_[123]`. A non-literal mention of the corresponding files was
missed in that commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message in question reads awkward with the name "master", but will
be even more confusing once that is renamed to "main". Let's adjust it
in advance of said rename.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `git p4 clone`, we hard-code the branch name `master` instead of
looking what the _actual_ initial branch name is. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern MSVC or Windows versions don't support big-endian, so it's
unnecessary to consider architectures when using it.
This also makes ARM64 MSVC builds succeed.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Daniel Gurney <dgurney99@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compression programs like zip, gzip, bzip2 and xz allow to adjust the
trade-off between CPU cost and size gain with numerical options from -1
for fast compression and -9 for high compression ratio. zip also
accepts -0 for storing files verbatim. git archive directly support
these single-digit compression levels for ZIP output and passes them to
filters like gzip.
Zstandard additionally supports compression level options -10 to -19, or
up to -22 with --ultra. This *seems* to work with git archive in most
cases, e.g. it will produce an archive with -19 without complaining, but
since it only supports single-digit compression level options this is
the same as -1 -9 and thus -9.
Allow git archive to accept multi-digit compression levels to support
the full range supported by zstd. Explicitly reject them for the ZIP
format, as otherwise deflateInit2() would just fail with a somewhat
cryptic "stream consistency error".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8de7eeb54b6 (compression: unify pack.compression configuration
parsing, 2016-11-15), we introduced identical copies of the `file_size`
helper into three test scripts, with the plan to eventually consolidate
them into a single copy.
Let's do that, and adjust the function name to adhere to the `test_*`
naming convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 3aef54e8b8 ("diff: munmap() file contents before running external
diff") introduced calls to diff_free_filespec_data in
run_external_diff, which may pass NULL pointers.
Fix this and prevent any such bugs in the future by making
`diff_free_filespec_data(NULL)` a no-op.
Fixes: 3aef54e8b8 ("diff: munmap() file contents before running external diff")
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix misspelled "specified" and "occurred" in documentation and
comments.
Signed-off-by: Marlon Rac Cambasis <marlonrc08@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all the external users of head_hash have been converted to
use a opts->orig_head instead we can stop returning head_hash from
get_revision_ranges().
Because we want to pass the full object names back to the caller in
`revisions` the find_unique_abbrev_r() call that was used to initialize
`head_hash` is replaced with oid_to_hex().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than passing a string around pass the struct object_id that the
string was created from call oid_hex() when we write the file.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a struct object_id containing the oid that we want to
set ORIG_HEAD to so use that rather than converting it to a string and
then calling get_oid() on that string.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After rebasing, ORIG_HEAD is supposed to point to the old HEAD of the
rebased branch. The code used find_unique_abbrev() to obtain the
object name of the old HEAD and wrote to both
.git/rebase-merge/orig-head (used by `rebase --abort` to go back to
the previous state) and to ORIG_HEAD. The buffer find_unique_abbrev()
gives back is volatile, unfortunately, and was overwritten after the
former file is written but before ORIG_FILE is written, leaving an
incorrect object name in it.
Avoid relying on the volatile buffer of find_unique_abbrev(), and
instead supply our own buffer to keep the object name.
I think that all of the users of head_hash should actually be using
opts->orig_head instead as passing a string rather than a struct
object_id around is a hang over from the scripted implementation. This
patch just fixes the immediate bug and adds a regression test based on
Caspar's reproduction example[1]. The users will be converted to use
struct object_id and head_hash removed in the next few commits.
[1] https://lore.kernel.org/git/CAFzd1+7PDg2PZgKw7U0kdepdYuoML9wSN4kofmB_-8NHrbbrHg@mail.gmail.com
Reported-by: Caspar Duregger <herr.kaste@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've never intended to support diff's --output option in format-patch.
And until baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27), it was impossible to trigger. We
first parse the format-patch options before handing the remainder off to
setup_revisions(). Before that commit, we'd accept "--output=foo" as an
abbreviation for "--output-directory=foo". But afterwards, we don't
check abbreviations, and --output gets passed to the diff code.
This results in nonsense behavior and bugs. The diff code will have
opened a filehandle at rev.diffopt.file, but we'll overwrite that with
our own handles that we open for each individual patch file. So the
--output file will always just be empty. But worse, the diff code also
sets rev.diffopt.close_file, so log_tree_commit() will close the
filehandle itself. And then the main loop in cmd_format_patch() will try
to close it again, resulting in a double-free.
The simplest solution would be to just disallow --output with
format-patch, as nobody ever intended it to work. However, we have
accidentally documented it (because format-patch includes diff-options).
And it does work with "git log", which writes the whole output to the
specified file. It's easy enough to make that work for format-patch,
too: it's really the same as --stdout, but pointed at a specific file.
We can detect the use of the --output option by the "close_file" flag
(note that we can't use rev.diffopt.file, since the diff setup will
otherwise set it to stdout). So we just need to unset that flag, but
don't have to do anything else. Our situation is otherwise exactly like
--stdout (note that we don't fclose() the file, but nor does the stdout
case; exiting the program takes care of that for us).
Reported-by: Johannes Postler <johannes.postler@txture.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In format-patch we're either outputting to stdout or to individual files
in an output directory (which may be just "./"). Our logic for whether
to open a new file for each patch is checked with "!use_stdout", but it
is equally correct to check for a non-NULL output_directory.
The distinction will matter when we add a new single-stream output in a
future patch, when only one of the three methods will want individual
files. Let's swap the logic here in preparation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdout and --output-directory options are mutually exclusive, but
it's hard to tell from reading the code. We have three separate
conditionals that check for use_stdout, and it's only after we've set up
the output_directory fully that we check whether the user also specified
--stdout.
Instead, let's check the exclusion explicitly first, then have a single
conditional that handles stdout versus an output directory. This is
slightly easier to follow now, and also will keep things sane when we
add another output mode in a future patch.
We'll add a few tests as well, covering the mutual exclusion and the
fact that we are not confused by a configured output directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Early text written in 2006 explains the "--abbrev=<n>" option to
"show only a partial prefix", without saying that the length of the
partial prefix is not necessarily the number given to the option to
ensure that the output names the object uniquely.
Update documentation for the diff family of commands, "blame",
"branch --verbose", "ls-files" and "ls-tree" to stress that the
short prefix must uniquely refer to an object, and <n> is merely
the mininum number of hexdigits used in the prefix.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L option is documented to accept no pathspec, but the
command line option parser has allowed the combination without
checking so far. Ensure that there is no pathspec when the -L
option is in effect to fix this.
Incidentally, this change fixes another bug in the command line
option parser, which has allowed the -L option used together
with the --follow option. Because the latter requires exactly
one path given, but the former takes no pathspec, they become
mutually incompatible automatically. Because the -L option
follows renames on its own, there is no reason to give --follow
at the same time.
The new tests say they may fail with "-L and --follow being
incompatible" instead of "-L and pathspec being incompatible".
Currently the expected failure can come only from the latter, but
this is to futureproof them, in case we decide to add code to
explicititly die on -L and --follow used together.
Heled-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 32c83afc2c69 (ci: github action - add check for whitespace errors,
2020-09-22), we introduced a GitHub workflow that automatically checks
Pull Requests for whitespace problems.
However, when affected lines contain one or more double quote
characters, this workflow failed to attach the informative comment
because the Javascript snippet incorrectly interpreted these quotes
instead of using the `git log` output as-is.
Let's fix that.
While at it, let's `await` the result of the `createComment()` function.
Finally, we enclose the log in the comment with ```...``` to avoid
having the diff marker be misinterpreted as an enumeration bullet.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c57b3367bed (worktree: teach `list` to annotate locked worktree,
2020-10-11), we introduced a test case that wanted to talk about
"worktrees" but talked about "worktress" instead. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous three commits, We prepared the `t5515` script and the
files in `t/t5515/` for the upcoming change of the default branch name
to `main`. The changes were made over the course of three commits
because the overall patch would have been too big to send to the Git
mailing list for review.
Naturally, the test could not pass in the transitional stages and was
therefore disabled via the `PREPARE_FOR_MAIN_BRANCH` prereq. Now that
the transition is complete, we can re-enable it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous two commits, We just started preparing the `t5515` script
and part of `t/t5515/` for the upcoming change of the default
branch name to `main`. This patch adjusts the remainder of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515/refs.*
In addition to that, we need to adjust some file _names_ in `t/t5515/`
because they encode the branch name:
eval "$(git ls-files t/t5515/refs.\* | sed -n \
-e 's/\(.*\)master\(.*\)/git mv & \1main\2;/p')"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just started preparing t5515 for the upcoming change of the default
branch name to `main`. This patch adjusts roughly half of the supporting
material in `t/t5515/` (the patch adjusting all of `t/t5515/` would have
weighed more than 100kB and therefore not made it to the Git mailing
list for review).
Similar to what we did for the `t5515` script itself in the previous
commit, this patch was generated via:
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515/fetch.*
In addition to that, we need to adjust some file _names_ in `t/t5515/`
because they encode the branch name:
eval "$(git ls-files t/t5515/fetch.\* | sed -n \
-e 's/\(.*\)master\(.*\)/git mv & \1main\2;/p')"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the effort to change the default branch name to `main`, let's
prepare t5515.
In addition to adjusting the references to the branch name itself, this
also requires two commit hashes to be adjusted (actually four, as there
is a SHA-1 _and_ a SHA-256 of both).
That trick was performed by running
sed -i -e 's/master/main/g' -e 's/Master/Main/g' \
-e 's/6c9dec2b923228c9ff994c6cfe4ae16c12408dc5/ecf3b3627b498bdcb735cc4343bf165f76964e9a/g' \
-e 's/8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75/fff666109892bb4b1c80cd1649d2d8762a0663db8b5d46c8be98360b64fbba5f/g' \
-e 's/754b754407bf032e9a2f9d5a9ad05ca79a6b228f/b4ab76b1a01ea602209932134a44f1e6bd610832/g' \
-e 's/6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0/380ebae0113f877ce46fcdf39d5bc33e4dc0928db5c5a4d5fdc78381c4d55ae3/g' \
-- t/t5515-*.sh
These commit hashes have been determined manually, of course, by running
the test after adjusting only the branch names, and then copying the
hashes from the log of the failed run.
Note: this patch only touches the t5515 script so far, not the
supporting material in t/t5515/. The resulting patch would have weighed
over 100kB and therefore the Git mailing list would have dropped it. The
files in t/t5515/ will be adjusted in the next two commits. As t5515
would fail without these adjustments, we temporarily skip it via the
`PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
