String-lists may be used with callbacks for clearing or iteration. These
callbacks need to conform to a particular interface, even though not
every callback needs all of its parameters. Mark the unused ones to make
-Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
The codepath for the OPT_SUBCOMMAND facility has been cleaned up.
* sg/parse-options-subcommand:
notes, remote: show unknown subcommands between `'
notes: simplify default operation mode arguments check
test-parse-options.c: fix style of comparison with zero
test-parse-options.c: don't use for loop initial declaration
t0040-parse-options: remove leftover debugging
Update the "unknown subcommand" error message in 'git notes' and 'git
remote' to wrap the offending argument between `', to make it
consistent with the "unknown switch/option/subcommand" error messages
in parse-options.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the "subcommand" mode to parse-options API and update the
command line parser of Git commands with subcommands.
* sg/parse-options-subcommand: (23 commits)
remote: run "remote rm" argv through parse_options()
maintenance: add parse-options boilerplate for subcommands
pass subcommand "prefix" arguments to parse_options()
builtin/worktree.c: let parse-options parse subcommands
builtin/stash.c: let parse-options parse subcommands
builtin/sparse-checkout.c: let parse-options parse subcommands
builtin/remote.c: let parse-options parse subcommands
builtin/reflog.c: let parse-options parse subcommands
builtin/notes.c: let parse-options parse subcommands
builtin/multi-pack-index.c: let parse-options parse subcommands
builtin/hook.c: let parse-options parse subcommands
builtin/gc.c: let parse-options parse 'git maintenance's subcommands
builtin/commit-graph.c: let parse-options parse subcommands
builtin/bundle.c: let parse-options parse subcommands
parse-options: add support for parsing subcommands
parse-options: drop leading space from '--git-completion-helper' output
parse-options: clarify the limitations of PARSE_OPT_NODASH
parse-options: PARSE_OPT_KEEP_UNKNOWN only applies to --options
api-parse-options.txt: fix description of OPT_CMDMODE
t0040-parse-options: test parse_options() with various 'parse_opt_flags'
...
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75d (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git remote rm" command's option parsing is fairly primitive: it
insists on a single argument, which it treats as the remote name, and
displays a usage message otherwise.
This is OK, and maybe even convenient, as you could run:
git remote rm --foo
to drop a remote named "--foo". But it's also weirdly unlike most of the
rest of Git, which would complain that there is no option "--foo". The
right way to spell it by our conventions is:
git remote rm -- --foo
but this doesn't currently work.
So let's bring the command in line with the rest of Git (including its
sibling subcommands!) by feeding argv to parse_options(). We already
have an empty options array for the usage helper.
Note that we have to adjust the argc index down by one, as
parse_options() eats the program name from the start of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent commits such as bf0a6b65fc (builtin/multi-pack-index.c: let
parse-options parse subcommands, 2022-08-19) converted a few functions
to match our usual argc/argv/prefix conventions, but the prefix argument
remains unused.
However, there is a good use for it: they should pass it to their own
parse_options() functions, where it may be used to adjust the value of
any filename options. In all but one of these functions, there's no
behavior change, since they don't use OPT_FILENAME. But this is an
actual fix for one option, which you can see by modifying the test suite
like so:
diff --git a/t/t5326-multi-pack-bitmaps.sh b/t/t5326-multi-pack-bitmaps.sh
index 4fe57414c1..d0974d4371 100755
--- a/t/t5326-multi-pack-bitmaps.sh
+++ b/t/t5326-multi-pack-bitmaps.sh
@@ -186,7 +186,11 @@ test_expect_success 'writing a bitmap with --refs-snapshot' '
# Then again, but with a refs snapshot which only sees
# refs/tags/one.
- git multi-pack-index write --bitmap --refs-snapshot=snapshot &&
+ (
+ mkdir subdir &&
+ cd subdir &&
+ git multi-pack-index write --bitmap --refs-snapshot=../snapshot
+ ) &&
test_path_is_file $midx &&
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
I'd emphasize that this wasn't broken by bf0a6b65fc; it has been broken
all along, because the sub-function never got to see the prefix. It is
that commit which is actually enabling us to fix it (and which also
brought attention to the problem because it triggers -Wunused-parameter!)
The other functions changed here don't use OPT_FILENAME at all. In their
cases this isn't fixing anything visible, but it's following the usual
pattern and future-proofing them against somebody adding new options and
being surprised.
I didn't include a test for the one visible case above. We don't
generally test routine parse-options behavior for individual options.
The challenge here was finding the problem, and now that this has been
done, it's not likely to regress. Likewise, we could apply the patch
above to cover it "for free" but it makes reading the rest of the test
unnecessarily complicated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback passed to git_config() must conform to a particular
interface. But most callbacks don't actually look at the extra "void
*data" parameter. Let's mark the unused parameters to make
-Wunused-parameter happy.
Note there's one unusual case here in get_remote_default() where we
actually ignore the "value" parameter. That's because it's only checking
whether the option is found at all, and not parsing its value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote' parses its subcommands with a long list of if-else if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling unknown subcommands, and listing subcommands for Bash
completion. Make sure that the default operation mode doesn't accept
any arguments; and while at it remove the capitalization of the error
message and adjust the test checking it accordingly.
Note that 'git remote' has both 'remove' and 'rm' subcommands, and the
former is preferred [1], so hide the latter for completion.
Note also that the functions implementing each subcommand only accept
the 'argc' and '**argv' parameters, so add a (unused) '*prefix'
parameter to make them match the type expected by parse-options, and
thus avoid casting a bunch of function pointers.
[1] e17dba8fe1 (remote: prefer subcommand name 'remove' to 'rm',
2012-09-06)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4a4b4cda (builtin-remote: Make "remote -v" display push urls,
2009-06-13), the string_list that was initialized with 0 in its
strdup_string member is immediately made to strdup its key strings
by flipping the strdup_string member to true. When 183113a5
(string_list: Add STRING_LIST_INIT macro and make use of it.,
2010-07-04) has introduced STRING_LIST_INIT macros, it mechanically
replaced the initialization to STRING_LIST_INIT_NODUP.
Instead, just use the other initialization macro to make it strdup
the key from the beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, the git remote show command will query data from remotes to
show data about what might be done on a future git fetch. This process
currently does not handle negative refspecs. This can be confusing,
because the show command will list refs as if they would be fetched. For
example if the fetch refspec "^refs/heads/pr/*", it still displays the
following:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 new (next fetch will store in remotes/jdk19)
pr/2 new (next fetch will store in remotes/jdk19)
pr/3 new (next fetch will store in remotes/jdk19)
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
Fix this by adding an additional check inside of get_ref_states. If a
ref matches one of the negative refspecs, mark it as skipped instead of
marking it as new or tracked.
With this change, we now report remote branches that are skipped due to
negative refspecs properly:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 skipped
pr/2 skipped
pr/3 skipped
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
By showing the refs as skipped, it helps clarify that these references
won't actually be fetched.
This does not properly handle refs going stale due to a newly added
negative refspec. In addition, git remote prune doesn't handle that
negative refspec case either. Fixing that requires digging into
get_stale_heads and handling the case of a ref which exists on the
remote but is omitted due to a negative refspec locally.
Add a new test case which covers the functionality above, as well as a
new expected failure indicating the poor overlap with stale refs.
Reported-by: Pavel Rappo <pavel.rappo@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git remote -v` (`--verbose`) lists down the names of remotes along with
their URLs. It would be beneficial for users to also specify the filter
types for promisor remotes. Something like this -
origin remote-url (fetch) [blob:none]
origin remote-url (push)
Teach `git remote -v` to also specify the filters for promisor remotes.
Closes: https://github.com/gitgitgadget/git/issues/1211
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rename A B", depending on the number of remote-tracking
refs involved, takes long time renaming them. The command has been
taught to show progress bar while making the user wait.
* tb/rename-remote-progress:
builtin/remote.c: show progress when renaming remote references
builtin/remote.c: parse options in 'rename'
Various optimization for "git fetch".
* ps/fetch-mirror-optim:
refs/files-backend: optimize reading of symbolic refs
remote: read symbolic refs via `refs_read_symbolic_ref()`
refs: add ability for backends to special-case reading of symbolic refs
fetch: avoid lookup of commits when not appending to FETCH_HEAD
upload-pack: look up "want" lines via commit-graph
When renaming a remote, Git needs to rename all remote tracking
references to the remote's new name (e.g., renaming
"refs/remotes/old/foo" to "refs/remotes/new/foo" when renaming a remote
from "old" to "new").
This can be somewhat slow when there are many references to rename,
since each rename is done in a separate call to rename_ref() as opposed
to grouping all renames together into the same transaction. It would be
nice to execute all renames as a single transaction, but there is a
snag: the reference transaction backend doesn't support renames during a
transaction (only individually, via rename_ref()).
The reasons there are described in more detail in [1], but the main
problem is that in order to preserve the existing reflog, it must be
moved while holding both locks (i.e., on "oldname" and "newname"), and
the ref transaction code doesn't support inserting arbitrary actions
into the middle of a transaction like that.
As an aside, adding support for this to the ref transaction code is
less straightforward than inserting both a ref_update() and ref_delete()
call into the same transaction. rename_ref()'s special handling to
detect D/F conflicts would need to be rewritten for the transaction code
if we wanted to proactively catch D/F conflicts when renaming a
reference during a transaction. The reftable backend could support this
much more readily because of its lack of D/F conflicts.
Instead of a more complex modification to the ref transaction code,
display a progress meter when running verbosely in order to convince the
user that Git is doing work while renaming a remote.
This is mostly done as-expected, with the minor caveat that we
intentionally count symrefs renames twice, since renaming a symref takes
place over two separate calls (one to delete the old one, and another to
create the new one).
[1]: https://lore.kernel.org/git/572367B4.4050207@alum.mit.edu/
Suggested-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git remote rename' command doesn't currently take any command-line
arguments besides the existing and new name of a remote, and so has no
need to call parse_options().
But the subsequent patch will add a `--[no-]progress` option, in which
case we will need to call parse_options().
Do so now so as to avoid cluttering the following patch with noise, like
adjusting setting `rename.{old,new}_name` to argv[0] and argv[1], since
parse_options handles advancing argv past the name of the sub-command.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two cases in the remote code where we check whether a reference
is symbolic or not, but don't mind in case it doesn't exist or in case
it exists but is a non-symbolic reference. Convert these two callsites
to use the new `refs_read_symbolic_ref()` function, whose intent is to
implement exactly that usecase.
No change in behaviour is expected from this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ab/designated-initializers-more:
builtin/remote.c: add and use SHOW_INFO_INIT
builtin/remote.c: add and use a REF_STATES_INIT
urlmatch.[ch]: add and use URLMATCH_CONFIG_INIT
builtin/blame.c: refactor commit_info_init() to COMMIT_INFO_INIT macro
daemon.c: refactor hostinfo_init() to HOSTINFO_INIT macro
In the preceding commit we introduced REF_STATES_INIT, but did not
change the "struct show_info" to have a corresponding
initializer. Let's do that, and make it use "REF_STATES_INIT" and
"STRING_LIST_INIT_DUP", doing that requires changing "list" and
"states" away from being pointers.
The resulting end-state is simpler since we omit the local "info_list"
and "states" variables in show() as well as the memset().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a new REF_STATES_INIT designated initializer instead of assigning
to the "strdup_strings" member of the previously memzero()'d version
of this struct.
The pattern of assigning to "strdup_strings" dates back to
211c89682e (Make git-remote a builtin, 2008-02-29) (when it was
"strdup_paths"), i.e. long before we used anything like our current
established *_INIT patterns consistently.
Then in e61e0cc6b7 (builtin-remote: teach show to display remote
HEAD, 2009-02-25) and e5dcbfd9ab (builtin-remote: new show output
style for push refspecs, 2009-02-25) we added some more of these.
As it turns out we only initialized this struct three times, all the
other uses were of pointers to those initialized structs. So let's
initialize it in those three places, skip the memset(), and pass those
structs down appropriately.
This would be a behavior change if we had codepaths that relied say on
implicitly having had "new_refs" initialized to STRING_LIST_INIT_NODUP
with the memset(), but only set the "strdup_strings" on some other
struct, but then called string_list_append() on "new_refs". There
isn't any such codepath, all of the late assignments to
"strdup_strings" assigned to those structs that we'd use for those
codepaths.
So just initializing them all up-front makes for easier to understand
code, i.e. in the pre-image it looked as though we had that tricky
edge case, but we didn't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ignore them silently, but it actually makes sense to warn the users
that their config setting has no effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug or annotate remaining leaks that trigger while running the
very basic set of tests.
* ah/plugleaks:
transport: also free remote_refs in transport_disconnect()
parse-options: don't leak alias help messages
parse-options: convert bitfield values to use binary shift
init-db: silence template_dir leak when converting to absolute path
init: remove git_init_db_config() while fixing leaks
worktree: fix leak in dwim_branch()
clone: free or UNLEAK further pointers when finished
reset: free instead of leaking unneeded ref
symbolic-ref: don't leak shortened refname in check_symref()
transport_get_remote_refs() can populate the transport struct's
remote_refs. transport_disconnect() is already responsible for most of
transport's cleanup - therefore we also take care of freeing remote_refs
there.
There are 2 locations where transport_disconnect() is called before
we're done using the returned remote_refs. This patch changes those
callsites to only call transport_disconnect() after the returned refs
are no longer being used - which is necessary to safely be able to
free remote_refs during transport_disconnect().
This commit fixes the following leak which was found while running
t0000, but is expected to also fix the same pattern of leak in all
locations that use transport_get_remote_refs():
Direct leak of 165 byte(s) in 1 object(s) allocated from:
#0 0x49a6b2 in calloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9a72f2 in xcalloc /home/ahunt/oss-fuzz/git/wrapper.c:140:8
#2 0x8ce203 in alloc_ref_with_prefix /home/ahunt/oss-fuzz/git/remote.c:867:20
#3 0x8ce1a2 in alloc_ref /home/ahunt/oss-fuzz/git/remote.c:875:9
#4 0x72f63e in process_ref_v2 /home/ahunt/oss-fuzz/git/connect.c:426:8
#5 0x72f21a in get_remote_refs /home/ahunt/oss-fuzz/git/connect.c:525:8
#6 0x979ab7 in handshake /home/ahunt/oss-fuzz/git/transport.c:305:4
#7 0x97872d in get_refs_via_connect /home/ahunt/oss-fuzz/git/transport.c:339:9
#8 0x9774b5 in transport_get_remote_refs /home/ahunt/oss-fuzz/git/transport.c:1388:4
#9 0x51cf80 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1271:9
#10 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#11 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#12 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#13 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#14 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#15 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote is renamed don't change the canonical "*.pushRemote"
form to "*.pushremote". Fixes and tests for a minor bug in
923d4a5ca4 (remote rename/remove: handle branch.<name>.pushRemote
config values, 2020-01-27). See the preceding commit for why this does
& doesn't matter.
While we're at it let's also test that we handle the "*.pushDefault"
key correctly. The code to handle that was added in
b3fd6cbf29 (remote rename/remove: gently handle remote.pushDefault
config, 2020-02-01) and does the right thing, but nothing tested that
we wrote out the canonical camel-cased form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "git remote add" so that it adds a *.tagOpt key, and not the
lower-cased *.tagopt on "git remote add --no-tags", just as "git clone
--no-tags" would do.
This doesn't matter for anything that reads the config. It's just
prettier if we write config keys in their documented camelCase form to
user-readable config files.
When I added support for "clone -no-tags" in 0dab2468ee (clone: add a
--no-tags option to clone without tags, 2017-04-26) I made it use
the *.tagOpt form, but the older "git remote add" added in
111fb85865 (remote add: add a --[no-]tags option, 2010-04-20) has
been using *.tagopt all this time.
It's easy enough to add a test for this, so let's do that. We can't
use "git config -l" there, because it'll normalize the keys to their
lower-cased form. Let's add the test for "git clone" too for good
measure, not just to the "git remote" codepath we're fixing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will extend the flexibility of the config API. Before doing so, let's
take an existing 'int multi_replace' parameter and replace it with a new
'unsigned flags' parameter that can take multiple options as a bit field.
Update all callers that specified multi_replace to now specify the
CONFIG_FLAGS_MULTI_REPLACE flag. To add more clarity, extend the
documentation of git_config_set_multivar_in_file() including a clear
labeling of its arguments. Other config API methods in config.h require
only a change of the final parameter from 'int' to 'unsigned'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
read_config();
check_config_and_arg_sanity();
save_config();
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber remote.NAME.url, and add another (usually
duplicate) remote.NAME.fetch entry (and other values, depending on
invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future patch, extract from remote.c a function that
validates possible remote names so that its rules can be used
consistently in other places.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote set-head" that failed still said something that hints
the operation went through, which was misleading.
* cs/don-t-pretend-a-failed-remote-set-head-succeeded:
remote: don't show success message when set-head fails
Suppress the message 'origin/HEAD set to master' in case of an error.
$ git remote set-head origin -a
error: Not a valid ref: refs/remotes/origin/master
origin/HEAD set to master
Signed-off-by: Christian Schlack <christian@backhub.co>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of functions that used struct refspec_item did not zero out the
structure memory. This can result in unexpected behavior, especially if
additional parameters are ever added to refspec_item in the future. Use
memset to ensure that unset structure members are zero.
It may make sense to convert most of these uses of struct refspec_item
to use either struct initializers or refspec_item_init_or_die. However,
other similar code uses memset. Converting all of these uses has been
left as a future exercise.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote with
git remote rename X Y
git remote remove X
Git already renames or removes any branch.<name>.remote and
branch.<name>.pushRemote configurations if their value is X.
However remote.pushDefault needs a more gentle approach, as this may be
set in a non-repo configuration file. In such a case only a warning is
printed, such as:
warning: The global configuration remote.pushDefault in:
$HOME/.gitconfig:35
now names the non-existent remote origin
It is changed to remote.pushDefault = Y or removed when set in a repo
configuration though.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming or removing a remote with
git remote rename X Y
git remote remove X
Git already renames/removes any config values from
branch.<name>.remote = X
to
branch.<name>.remote = Y
As branch.<name>.pushRemote also names a remote, it now also renames
or removes these config values from
branch.<name>.pushRemote = X
to
branch.<name>.pushRemote = Y
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some minor clean-ups in function `config_read_branches`:
* remove hardcoded length in `key += 7`
* call `xmemdupz` only once
* use a switch to handle the configuration type and add a `BUG()`
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_ref_full() wraps refs_read_ref_full(), which in turn wraps
refs_resolve_ref_unsafe(), which handles a NULL oid pointer of callers
not interested in the resolved object ID. Make use of that feature to
document that mv() is such a caller.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function already takes a "key" parameter which uniquely identifies
the config key that we need to remove. There's no need for it to look at
the "remote" parameter at all. Let's drop it in the name of simplicity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update error messages given by "git remote" and make them consistent.
* ms/remote-error-message-update:
builtin/remote: quote remote name on error to display empty name
Jeff King
Junio C Hamano
SZEDER Gábor
Ævar Arnfjörð Bjarmason
Jacob Keller
Abhradeep Chakraborty
Taylor Blau
Patrick Steinhardt
Jean-Noël Avila
Johannes Schindelin
Andrzej Hunt
Derrick Stolee
Sean Barag
Christian Schlack
Jacob Keller
Denton Liu
Bert Wesarg
René Scharfe