Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.
There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).
Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).
This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename one function to reflect that it now uses struct object_id. This
conversion is a prerequisite for converting parse_object.
Note that while the use of a buffer that is exactly forty bytes long
looks questionable, get_oid_hex reads exactly the right number of bytes
and does not require the data to be NUL-terminated.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the lookup_tree function to take a pointer to struct object_id.
The commit was created with manual changes to tree.c, tree.h, and
object.c, plus the following semantic patch:
@@
@@
- lookup_tree(EMPTY_TREE_SHA1_BIN)
+ lookup_tree(&empty_tree_oid)
@@
expression E1;
@@
- lookup_tree(E1.hash)
+ lookup_tree(&E1)
@@
expression E1;
@@
- lookup_tree(E1->hash)
+ lookup_tree(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_blob to take a pointer to struct object_id.
The commit was created with manual changes to blob.c and blob.h, plus
the following semantic patch:
@@
expression E1;
@@
- lookup_blob(E1.hash)
+ lookup_blob(&E1)
@@
expression E1;
@@
- lookup_blob(E1->hash)
+ lookup_blob(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among the functions converted is a caller of lookup_commit_or_die, which
we will convert later on.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function always returns a reference to an object, creating one if
needed, so remove the unnecessary NULL check.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls.
In http-push.c it becomes easier to see what's going on without having
to verfiy that the definition of PROPFIND_ALL_REQUEST doesn't contain
any format specifiers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should be part of every program, as otherwise users do
not get translated error messages. However, some external
commands forgot to do so (e.g., git-credential-store). This
fixes them, and eliminates the repeated code in programs
that did remember to use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every program which links against libgit.a must call this
function, or risk hitting an assert() in system_path() that
checks whether we have configured argv0_path (though only
when RUNTIME_PREFIX is defined, so essentially only on
Windows).
Looking at the diff, you can see that putting it into the
common main() saves us having to do it individually in each
of the external commands. But what you can't see are the
cases where we _should_ have been doing so, but weren't
(e.g., git-credential-store, and all of the t/helper test
programs).
This has been an accident-waiting-to-happen for a long time,
but wasn't triggered until recently because it involves one
of those programs actually calling system_path(). That
happened with git-credential-store in v2.8.0 with ae5f677
(lazily load core.sharedrepository, 2016-03-11). The
program:
- takes a lock file, which...
- opens a tempfile, which...
- calls adjust_shared_perm to fix permissions, which...
- lazy-loads the config (as of ae5f677), which...
- calls system_path() to find the location of
/etc/gitconfig
On systems with RUNTIME_PREFIX, this means credential-store
reliably hits that assert() and cannot be used.
We never noticed in the test suite, because we set
GIT_CONFIG_NOSYSTEM there, which skips the system_path()
lookup entirely. But if we were to tweak git_config() to
find /etc/gitconfig even when we aren't going to open it,
then the test suite shows multiple failures (for
credential-store, and for some other test helpers). I didn't
include that tweak here because it's way too specific to
this particular call to be worth carrying around what is
essentially dead code.
The implementation is fairly straightforward, with one
exception: there is exactly one caller (git.c) that actually
cares about the result of the function, and not the
side-effect of setting up argv0_path. We can accommodate
that by simply replacing the value of argv[0] in the array
we hand down to cmd_main().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are certain startup tasks that we expect every git
process to do. In some cases this is just to improve the
quality of the program (e.g., setting up gettext()). In
others it is a requirement for using certain functions in
libgit.a (e.g., system_path() expects that you have called
git_extract_argv0_path()).
Most commands are builtins and are covered by the git.c
version of main(). However, there are still a few external
commands that use their own main(). Each of these has to
remember to include the correct startup sequence, and we are
not always consistent.
Rather than just fix the inconsistencies, let's make this
harder to get wrong by providing a common main() that can
run this standard startup.
We basically have two options to do this:
- the compat/mingw.h file already does something like this by
adding a #define that replaces the definition of main with a
wrapper that calls mingw_startup().
The upside is that the code in each program doesn't need
to be changed at all; it's rewritten on the fly by the
preprocessor.
The downside is that it may make debugging of the startup
sequence a bit more confusing, as the preprocessor is
quietly inserting new code.
- the builtin functions are all of the form cmd_foo(),
and git.c's main() calls them.
This is much more explicit, which may make things more
obvious to somebody reading the code. It's also more
flexible (because of course we have to figure out _which_
cmd_foo() to call).
The downside is that each of the builtins must define
cmd_foo(), instead of just main().
This patch chooses the latter option, preferring the more
explicit approach, even though it is more invasive. We
introduce a new file common-main.c, with the "real" main. It
expects to call cmd_main() from whatever other objects it is
linked against.
We link common-main.o against anything that links against
libgit.a, since we know that such programs will need to do
this setup. Note that common-main.o can't actually go inside
libgit.a, as the linker would not pick up its main()
function automatically (it has no callers).
The rest of the patch is just adjusting all of the various
external programs (mostly in t/helper) to use cmd_main().
I've provided a global declaration for cmd_main(), which
means that all of the programs also need to match its
signature. In particular, many functions need to switch to
"const char **" instead of "char **" for argv. This effect
ripples out to a few other variables and functions, as well.
This makes the patch even more invasive, but the end result
is much better. We should be treating argv strings as const
anyway, and now all programs conform to the same signature
(which also matches the way builtins are defined).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
We introduce a way to send custom HTTP headers with all requests.
This allows us, for example, to send an extra token from build agents
for temporary access to private repositories. (This is the use case that
triggered this patch.)
This feature can be used like this:
git -c http.extraheader='Secret: sssh!' fetch $URL $REF
Note that `curl_easy_setopt(..., CURLOPT_HTTPHEADER, ...)` takes only
a single list, overriding any previous call. This means we have to
collect _all_ of the headers we want to use into a single list, and
feed it to cURL in one shot. Since we already unconditionally set a
"pragma" header when initializing the curl handles, we can add our new
headers to that list.
For callers which override the default header list (like probe_rpc),
we provide `http_copy_default_headers()` so they can do the same
trick.
Big thanks to Jeff King and Junio Hamano for their outstanding help and
patient reviews.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graph traversal code here passes along a name_path to
build up the pathname at which we find each blob. But we
never actually do anything with the resulting names, making
it a waste of code and memory.
This usage came in aa1dbc9 (Update http-push functionality,
2006-03-07), and originally the result was passed to
"add_object" (which stored it, but didn't really use it,
either). But we stopped using that function in 1f1e895 (Add
"named object array" concept, 2006-06-19) in favor of
storing just the objects themselves.
Moreover, the generation of the name in process_tree() is
buggy. It sticks "name" onto the end of the name_path linked
list, and then passes it down again as it recurses (instead
of "entry.path"). So it's a good thing this was unused, as
the resulting path for "a/b/c/d" would end up as "a/a/a/a".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert ref_newer and its caller to use struct object_id instead of
unsigned char *.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
In some cases where we strcpy() the result of sha1_to_hex(),
there's no need; the result goes directly into a printf
statement, and we can simply pass the return value from
sha1_to_hex() directly.
When this code was originally written, sha1_to_hex used a
single buffer, and it was not safe to use it twice within a
single expression. That changed as of dcb3450 (sha1_to_hex()
usage cleanup, 2006-05-03), but this code was never updated.
History-dug-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This drops the magic number for the fixed-size argv arrays,
so we do not have to wonder if we are overflowing it. We can
also drop some confusing sha1_to_hex memory allocation
(which seems to predate the ring of buffers allowing
multiple calls), and get rid of an unchecked sprintf call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-push code defines an fwrite_buffer function for use
as a curl callback; it just writes to a strbuf. There's no
reason we need to use it ourselves, as we know we have a
strbuf. This lets us format directly into it, rather than
dealing with an extra temporary buffer (which required
manual length computation).
While we're here, let's also remove the literal tabs from
the source in favor of "\t", which is more visually obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We account for these strcats in our initial allocation, but
the code is confusing to follow and verify. Let's remember
our original allocation length, and then xsnprintf can
verify that we don't exceed it.
Note that we can't just use xstrfmt here (which would be
even cleaner) because the code tries to grow the buffer only
when necessary.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally use 32-byte buffers to format git's "type size"
header fields. These should not generally overflow unless
you can produce some truly gigantic objects (and our types
come from our internal array of constant strings). But it is
a good idea to use xsnprintf to make sure this is the case.
Note that we slightly modify the interface to
write_sha1_file_prepare, which nows uses "hdrlen" as an "in"
parameter as well as an "out" (on the way in it stores the
allocated size of the header, and on the way out it returns
the ultimate size of the header).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
preq is NULL as the condition the line before dictates. And the cleanup
function release_http_pack_request is not null pointer safe.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch a symbolic ref file from the remote, we get
the whole string "ref: refs/heads/master\n", recognize it by
skipping past the "ref: ", and store the rest. We should
chomp the trailing newline.
This bug was introduced in ae021d8 (use skip_prefix to avoid
magic numbers, 2014-06-18), which did not notice that the
length computation fed to xmemdupz was quietly tweaked by 1
to account for this.
We can solve it by explicitly trimming the newline, which is
more obvious. Note that we use strbuf_rtrim here, which will
actually cut off any trailing whitespace, not just a single
newline. This is a good thing, though, as it makes our
parsing more liberal (and spaces are not valid in refnames
anyway).
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An ancient rewrite passed a wrong pointer to a curl library
function in a rarely used code path.
* ah/fix-http-push:
http-push.c: make CURLOPT_IOCTLDATA a usable pointer
Fixes a small bug affecting push to remotes which use some sort of
multi-pass authentication. In particular the bug affected SabreDAV as
configured by Box.com [1].
It must be a weird server configuration for the bug to have survived
this long. Someone should write a test for it.
[1] http://marc.info/?l=git&m=140460482604482
Signed-off-by: Abbaad Haider <abbaad@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/xstrfmt:
setup_git_env(): introduce git_path_from_env() helper
unique_path: fix unlikely heap overflow
walker_fetch: fix minor memory leak
merge: use argv_array when spawning merge strategy
sequencer: use argv_array_pushf
setup_git_env: use git_pathdup instead of xmalloc + sprintf
use xstrfmt to replace xmalloc + strcpy/strcat
use xstrfmt to replace xmalloc + sprintf
use xstrdup instead of xmalloc + strcpy
use xstrfmt in favor of manual size calculations
strbuf: add xstrfmt helper
We get loose object names like "objects/??/..." from the
remote side, and need to convert them to their hex
representation.
The code to do so is rather hard to follow, as it uses some
calculated lengths whose origins are hard to understand and
verify (e.g., the path must be exactly 49 characters long.
why? Why doesn't the strcpy overflow obj_hex, which is the
same length as path?).
We can simplify this a bit by using skip_prefix, using standard
40- and 20-character buffers for hex and binary sha1s, and
adding some comments.
We also drop a totally bogus comment that claims strlcpy
cannot be used because "path" is not NUL-terminated. Right
between a call to strlen(path) and strcpy(path).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with a magic number, like:
if (starts_with(foo, "bar"))
foo += 3;
This is easy to get wrong, since you have to count the
prefix string yourself, and there's no compiler check if the
string changes. We can use skip_prefix to avoid the magic
numbers here.
Note that some of these conversions could be much shorter.
For example:
if (starts_with(arg, "--foo=")) {
bar = arg + 6;
continue;
}
could become:
if (skip_prefix(arg, "--foo=", &bar))
continue;
However, I have left it as:
if (skip_prefix(arg, "--foo=", &v)) {
bar = v;
continue;
}
to visually match nearby cases which need to actually
process the string. Like:
if (skip_prefix(arg, "--foo=", &v)) {
bar = atoi(v);
continue;
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one line shorter, and makes sure the length in the
malloc and sprintf steps match.
These conversions are very straightforward; we can drop the
malloc entirely, and replace the sprintf with xstrfmt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one line shorter, and makes sure the length in the
malloc and copy steps match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
http-push passes the arguments in reverse order, passing the size
of a repo, followed by the number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the field "flags" is mainly used by the revision walker, it is
also used in many other places. Centralize the whole flag allocation to
one place for a better overview (and easier to move flags if we have
too).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle the case where http transport gets redirected during the
authorization request better.
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
Over time, the http_get_strbuf function has grown several
optional parameters. We now have a bitfield with multiple
boolean options, as well as an optional strbuf for returning
the content-type of the response. And a future patch in this
series is going to add another strbuf option.
Treating these as separate arguments has a few downsides:
1. Most call sites need to add extra NULLs and 0s for the
options they aren't interested in.
2. The http_get_* functions are actually wrappers around
2 layers of low-level implementation functions. We have
to pass these options through individually.
3. The http_get_strbuf wrapper learned these options, but
nobody bothered to do so for http_get_file, even though
it is backed by the same function that does understand
the options.
Let's consolidate the options into a single struct. For the
common case of the default options, we'll allow callers to
simply pass a NULL for the options struct.
The resulting code is often a few lines longer, but it ends
up being easier to read (and to change as we add new
options, since we do not need to update each call site).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
When there is no sufficient overlap between old and new history
during a fetch into a shallow repository, we unnecessarily sent
objects the sending side knows the receiving end has.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
Jeff King
Jonathan Tan
Ævar Arnfjörð Bjarmason
brian m. carlson
René Scharfe
Junio C Hamano
Johannes Schindelin
Stefan Beller
Abbaad Haider
Brian Gesiak
Nguyễn Thái Ngọc Duy
Christian Couder