Fetching over dumb HTTP transport doesn't show any progress, even with
the option --progress. If the connection is slow or there is a lot of
data to get then this can take a long time while the user is left to
wonder if git got stuck.
We don't know the number of objects to fetch at the outset, but we can
count the ones we got. Show an open-ended progress indicator based on
that number if the user asked for it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix for a bug revealed by a recent change to make the protocol v2
the default.
* ds/partial-clone-fixes:
partial-clone: avoid fetching when looking for objects
partial-clone: demonstrate bugs in partial fetch
The merge-recursive machinery failed to refresh the cache entry for
a merge result in a couple of places, resulting in an unnecessary
merge failure, which has been fixed.
* en/t3433-rebase-stat-dirty-failure:
merge-recursive: fix the refresh logic in update_file_flags
t3433: new rebase testcase documenting a stat-dirty-like failure
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
"git check-ignore" did not work when the given path is explicitly
marked as not ignored with a negative entry in the .gitignore file.
* en/check-ignore:
check-ignore: fix documentation and implementation to match
The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
When a mergetag names a non-parent, which can occur after a shallow
clone, its hash was previously printed as raw data. Print it in hex form
instead.
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d9c6469 (git-gui: update status bar to track operations, 2019-12-01)
the call to 'ui_status' in 'do_gitk' was updated to create the newly
introduced "status bar operation". This allowed this status text to show
along with other operations happening in parallel, and removed a race
between all these operations.
But in that refactor, the fact that 'ui_status' checks for the existence
of 'main_status' was overlooked. This leads to an error message popping
up when the user selects "Show History Context" from the blame window
context menu on a source line. The error occurs because when running
"blame" 'main_status' is not initialized.
So, add a check for the existence of 'main_status' in 'do_gitk'. This
fix reverts to the original behaviour. In the future, we might want to
look into a better way of telling 'do_gitk' which status bar to use.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
This reverts commit 72b006f4bfd30b7c5037c163efaf279ab65bea9c, which
breaks the end-user experience when merging a signed tag without
having the public key. We should report "can't check because we
have no public key", but the code with this change claimed that
there was no signature.
We recently triggered some -Wformat-zero-length warnings in the code,
but no developers noticed because we suppress that warning in builds
with the DEVELOPER=1 Makefile knob set. But we _don't_ suppress them in
a non-developer build (and they're part of -Wall). So even though
non-developers probably aren't using -Werror, they see the annoying
warnings when they build.
We've had back and forth discussion over the years on whether this
warning is useful or not. In most cases we've seen, it's not true that
the call is a mistake, since we're using its side effects (like adding a
newline status_printf_ln()) or writing an empty string to a destination
which is handled by the function (as in write_file()). And so we end up
working around it in the source by passing ("%s", "").
There's more discussion in the subthread starting at:
https://lore.kernel.org/git/xmqqtwaod7ly.fsf@gitster.mtv.corp.google.com/
The short of it is that we probably can't just disable the warning for
everybody because of portability issues. And ignoring it for developers
puts us in the situation we're in now, where non-dev builds are annoyed.
Since the workaround is both rarely needed and fairly straight-forward,
let's just commit to doing it as necessary, and re-enable the warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes the following warnings:
rebase-interactive.c: In function ‘edit_todo_list’:
rebase-interactive.c:137:38: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_dropped(), "");
rebase-interactive.c:144:37: warning: zero-length gnu_printf format string [-Wformat-zero-length]
write_file(rebase_path_dropped(), "");
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explanation
-----------
The problem here is flawed `poll()` implementation. When it tries to
see if pipe can be written without blocking, it eventually calls
`NtQueryInformationFile()` and tests `WriteQuotaAvailable`. However,
the meaning of quota was misunderstood. The value of quota is reduced
when either some data was written to a pipe, *or* there is a pending
read on the pipe. Therefore, if there is a pending read of size >= than
the pipe's buffer size, poll() will think that pipe is not writable and
will hang forever, usually that means deadlocking both pipe users.
I have studied the problem and found that Windows pipes track two values:
`QuotaUsed` and `BytesInQueue`. The code in `poll()` apparently wants to
know `BytesInQueue` instead of quota. Unfortunately, `BytesInQueue` can
only be requested from read end of the pipe, while `poll()` receives
write end.
The git's implementation of `poll()` was copied from gnulib, which also
contains a flawed implementation up to today.
I also had a look at implementation in cygwin, which is also broken in a
subtle way. It uses this code in `pipe_data_available()`:
fpli.WriteQuotaAvailable = (fpli.OutboundQuota - fpli.ReadDataAvailable)
However, `ReadDataAvailable` always returns 0 for the write end of the pipe,
turning the code into an obfuscated version of returning pipe's total
buffer size, which I guess will in turn have `poll()` always say that pipe
is writable. The commit that introduced the code doesn't say anything about
this change, so it could be some debugging code that slipped in.
These are the typical sizes used in git:
0x2000 - default read size in `strbuf_read()`
0x1000 - default read size in CRT, used by `strbuf_getwholeline()`
0x2000 - pipe buffer size in compat\mingw.c
As a consequence, as soon as child process uses `strbuf_read()`,
`poll()` in parent process will hang forever, deadlocking both
processes.
This results in two observable behaviors:
1) If parent process begins sending STDIN quickly (and usually that's
the case), then first `poll()` will succeed and first block will go
through. MAX_IO_SIZE_DEFAULT is 8MB, so if STDIN exceeds 8MB, then
it will deadlock.
2) If parent process waits a little bit for any reason (including OS
scheduler) and child is first to issue `strbuf_read()`, then it will
deadlock immediately even on small STDINs.
The problem is illustrated by `git stash push`, which will currently
read the entire patch into memory and then send it to `git apply` via
STDIN. If patch exceeds 8MB, git hangs on Windows.
Possible solutions
------------------
1) Somehow obtain `BytesInQueue` instead of `QuotaUsed`
I did a pretty thorough search and didn't find any ways to obtain
the value from write end of the pipe.
2) Also give read end of the pipe to `poll()`
That can be done, but it will probably invite some dirty code,
because `poll()`
* can accept multiple pipes at once
* can accept things that are not pipes
* is expected to have a well known signature.
3) Make `poll()` always reply "writable" for write end of the pipe
Afterall it seems that cygwin (accidentally?) does that for years.
Also, it should be noted that `pump_io_round()` writes 8MB blocks,
completely ignoring the fact that pipe's buffer size is only 8KB,
which means that pipe gets clogged many times during that single
write. This may invite a deadlock, if child's STDERR/STDOUT gets
clogged while it's trying to deal with 8MB of STDIN. Such deadlocks
could be defeated with writing less than pipe's buffer size per
round, and always reading everything from STDOUT/STDERR before
starting next round. Therefore, making `poll()` always reply
"writable" shouldn't cause any new issues or block any future
solutions.
4) Increase the size of the pipe's buffer
The difference between `BytesInQueue` and `QuotaUsed` is the size
of pending reads. Therefore, if buffer is bigger than size of reads,
`poll()` won't hang so easily. However, I found that for example
`strbuf_read()` will get more and more hungry as it reads large inputs,
eventually surpassing any reasonable pipe buffer size.
Chosen solution
---------------
Make `poll()` always reply "writable" for write end of the pipe.
Hopefully one day someone will find a way to implement it properly.
Reproduction
------------
printf "%8388608s" X >large_file.txt
git stash push --include-untracked -- large_file.txt
I have decided not to include this as test to avoid slowing down the
test suite. I don't expect the specific problem to come back, and
chances are that `git stash push` will be reworked to avoid sending the
entire patch via STDIN.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We seem to be getting new users who get confused every 20 months or
so with this "-h consistently wants to give help, but the commands
to which `-h` may feel like a good short-form option want it to mean
something else." compromise.
Let's make sure that the readers know that `git cmd -h` (with no
other arguments) is a way to get usage text, even for commands like
ls-remote and grep.
Also extend the description that is already in gitcli.txt, as it is
clear that users still get confused with the current text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a repository has two files:
foo/bar/baz
foo/bar-2/baz
then a simple lexicographic ordering of files and directories shows
...
foo/bar
foo/bar-2
foo/bar/baz
...
and the appearance of foo/bar-2 between foo/bar and foo/bar/baz can trip
up some codepaths. Add a test to catch such cases.
t6020 might be a slight misfit since this testcase does not test any
kind of file/directory conflict. However, it is similar in spirit to
some tests (4-6) already in t6020 that check cases where a *file* sorted
between a directory and the files underneath that directory. This
testcase differs in that now there is a *directory* that sorts in the
middle.
Although merge-recursive currently has no problems with this simple
testcase, I discovered that it's very possible to accidentally mess it
up. Further, we have no other merge or cherry-pick or rebase testcases
in the entire testsuite that cover such a case, so I felt like it would
be a worthwhile addition to the testsuite.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6022, we were testing for file being overwritten (or not) based on
an output message instead of checking for the file being overwritten.
Since we can check for the file being overwritten via mtime updates,
check that instead.
In t6046, we were largely checking for both the expected behavior and a
proxy for it, which is unnecessary. The calls to test-tool also were a
bit cryptic. Make them a little clearer.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of test_path_is_file, test_write_lines, and similar helpers
in these old test files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Indent code, and include it inside test_expect* blocks.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the en/merge-path-collision topic (see commit ac193e0e0aa5, "Merge
branch 'en/merge-path-collision'", 2019-01-04), all the "file collision"
conflict types were modified for consistency. In particular,
rename/add, rename/rename(2to1) and each rename/add piece of a
rename/rename(1to2)/add[/add] conflict were made to behave like add/add
conflicts have always been handled.
However, this consistency was not enforced when opt->priv->call_depth >
0 for rename/rename conflicts. Update rename/rename(1to2) and
rename/rename(2to1) conflicts in the recursive case to also be
consistent. As an added bonus, this simplifies the code considerably.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most recent Azure Pipelines macOS agents enable what Apple calls
"System Integrity Protection". This makes `p4d -V` hang: there is some
sort of GUI dialog waiting for the user to acknowledge that the copied
binaries are legit and may be executed, but on build agents, there is no
user who could acknowledge that.
Let's ask Homebrew specifically to _not_ quarantine the Perforce
binaries.
Helped-by: Aleksandr Chebotov
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among other differences relative to GNU sed, macOS' sed always ends its
output with a trailing newline, even if the input did not have such a
trailing newline.
Surprisingly, this makes three httpd-based tests fail on macOS: t5616,
t5702 and t5703. ("Surprisingly" because those tests have been around
for some time, but apparently nobody runs them on macOS with a working
Apache2 setup.)
The reason is that we use `sed` in those tests to filter the response of
the web server. Apart from the fact that we use GNU constructs (such as
using a space after the `c` command instead of a backslash and a
newline), we have another problem: macOS' sed LF-only newlines while
webservers are supposed to use CR/LF ones.
Even worse, t5616 uses `sed` to replace a binary part of the response
with a new binary part (kind of hoping that the replaced binary part
does not contain a 0x0a byte which would be interpreted as a newline).
To that end, it calls on Perl to read the binary pack file and
hex-encode it, then calls on `sed` to prefix every hex digit pair with a
`\x` in order to construct the text that the `c` statement of the `sed`
invocation is supposed to insert. So we call Perl and sed to construct a
sed statement. The final nail in the coffin is that macOS' sed does not
even interpret those `\x<hex>` constructs.
Let's just replace all of that by Perl snippets. With Perl, at least, we
do not have to deal with GNU vs macOS semantics, we do not have to worry
about unwanted trailing newlines, and we do not have to spawn commands
to construct arguments for other commands to be spawned (i.e. we can
avoid a whole lot of shell scripting complexity).
The upshot is that this fixes t5616, t5702 and t5703 on macOS with
Apache2.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_commit_graphs() copies the (translated) progress message into a
strbuf and passes the copy to start_delayed_progress() at each loop
iteration. The latter function takes a string pointer, so let's avoid
the detour and hand the string to it directly. That's shorter, simpler
and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When searching the commit graph for tag candidates, `git-describe`
will stop as soon as there is only one active branch left and
it already found an annotated tag as a candidate.
This works well as long as all branches eventually connect back
to a common root, but if the tags are found across branches
with no common ancestor
B
o----.
\
o-----o---o----x
A
it can happen that the search on one branch terminates prematurely
because a tag was found on another, independent branch. This scenario
isn't quite as obscure as it sounds, since cloning with a limited
depth often introduces many independent "dead ends" into the commit
graph.
The help text of `git-describe` states pretty clearly that when
describing a commit D, the number appended to the emitted tag X should
correspond to the number of commits found by `git log X..D`.
Thus, this commit modifies the stopping condition to only abort
the search when only one branch is left to search *and* all current
best candidates are descendants from that branch.
For repositories with a single root, this condition is always
true: When the search is reduced to a single active branch, the
current commit must be an ancestor of *all* tag candidates. This
means that in the common case, this change will have no negative
performance impact since the same number of commits as before will
be traversed.
Signed-off-by: Benno Evers <benno@bmevers.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `options.switch_to' is set, `options.orig_head' is populated right
after with the object name the ref/commit argument points at.
Therefore, there is no need to parse `switch_to' again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
Previously, performing "git clone --recurse-submodules --single-branch"
resulted in submodules cloning all branches even though the superproject
cloned only one branch. Pipe --single-branch through the submodule
helper framework to make it to 'clone' later on.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start using a named initializer list for SUBMODULE_UPDATE_CLONE_INIT, as
the struct is becoming cumbersome for a typical struct initializer list.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Log graph comparision logic is duplicated many times in:
- t3430-rebase-merges.sh
- t4202-log.sh
- t4214-log-graph-octopus.sh
- t4215-log-skewed-merges.sh
Consolidate the core of the comparision and sanitization logic in
lib-log-graph, and use it to replace the existing tests.
While at it, lose the singular/plural transition magic from the
sanitize_output helper, which was necessary around 7f814632 ("Use
correct grammar in diffstat summary line", 2012-02-01), that has
long outlived its usefulness.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add <path>" performs various checks before approving
<path> as a valid location for the new worktree. Aside from ensuring
that <path> does not already exist, one of the questions it asks is
whether <path> is already a registered worktree. To perform this check,
it queries find_worktree() and disallows the "add" operation if
find_worktree() finds a match for <path>. As a convenience, however,
find_worktree() casts an overly wide net to allow users to identify
worktrees by shorthand in order to keep typing to a minimum. For
instance, it performs suffix matching which, given subtrees "foo/bar"
and "foo/baz", can correctly select the latter when asked only for
"baz".
"add" validation knows the exact path it is interrogating, so this sort
of heuristic-based matching is, at best, questionable for this use-case
and, at worst, may may accidentally interpret <path> as matching an
existing worktree and incorrectly report it as already registered even
when it isn't. (In fact, validate_worktree_add() already contains a
special case to avoid accidentally matching against the main worktree,
precisely due to this problem.)
Avoid the problem of potential accidental matching against an existing
worktree by instead taking advantage of find_worktree_by_path() which
matches paths deterministically, without applying any sort of magic
shorthand matching performed by find_worktree().
Reported-by: Cameron Gunnin <cameron.gunnin@synopsys.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_worktree() employs heuristics to match user provided input -- which
may be a pathname or some sort of shorthand -- with an actual worktree.
Although this convenience allows a user to identify a worktree with
minimal typing, the black-box nature of these heuristics makes it
potentially difficult for callers which already know the exact path of a
worktree to be confident that the correct worktree will be returned for
any specific pathname (particularly a relative one), especially as the
heuristics are enhanced and updated.
Therefore, add a companion function, find_worktree_by_path(), which
deterministically identifies a worktree strictly by pathname with no
interpretation and no magic matching.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do a better job of explaining that find_worktree()'s main purpose is to
locate a worktree based upon input from a user which may be some sort of
shorthand for identifying a worktree rather than an actual path. For
instance, one shorthand a user can use to identify a worktree is by
unique path suffix (i.e. given worktrees at paths "foo/bar" and
"foo/baz", the latter can be identified simply as "baz"). The actual
heuristics find_worktree() uses to select a worktree may be expanded in
the future (for instance, one day it may allow worktree selection by
<id> of the .git/worktrees/<id>/ administrative directory), thus the
documentation does not provide a precise description of how matching is
performed, instead leaving it open-ended to allow for future
enhancement.
While at it, drop mention of the non-NULL requirement of `prefix` since
NULL has long been allowed. For instance, prefix_filename() has
explicitly allowed NULL since 116fb64e43 (prefix_filename: drop length
parameter, 2017-03-20), and find_worktree() itself since e4da43b1f0
(prefix_filename: return newly allocated string, 2017-03-20).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, nth_packed_object_sha1() was the primary way to get
the oid of a packfile's index position. But these days we have the more
type-safe nth_packed_object_id() wrapper, and all callers have been
converted.
Let's drop the "sha1" version (turning the safer wrapper into a single
function) so that nobody is tempted to introduce new callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit changed the public interface of packed_object_info()
to return a struct object_id rather than a bare hash. That enables us to
convert our internal helper, as well. We can use nth_packed_object_id()
directly for OFS_DELTA, but we'll still have to use oidread() to pull
the hash for a REF_DELTA out of the packfile.
There should be no additional cost, since we're copying directly into
the object_id the caller provided us (just as we did before; it's just
happening now via nth_packed_object_id()).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller sets the object_info.delta_base_sha1 to a non-NULL pointer,
we'll write the oid of the object's delta base to it. But we can
increase our type safety by switching this to a real object_id struct.
All of our callers are just pointing into the hash member of an
object_id anyway, so there's no inconvenience.
Note that we do still keep it as a pointer-to-struct, because the NULL
sentinel value tells us whether the caller is even interested in the
information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're checking a pack with fsck or verify-pack, we first sort the
idx entries by offset, since accessing them in pack order is more
efficient. To do so, we loop over them and fill in an array of structs
with the offset, object_id, and index position of each, sort the result,
and only then do we iterate over the sorted array and process each
entry.
In order to avoid the memory cost of storing the hash of each object, we
just store a pointer into the copy in the mmap'd pack index file. To
keep that property even as the rest of the code converted to "struct
object_id", commit 9fd750461b (Convert the verify_pack callback to
struct object_id, 2017-05-06) introduced a union in order to type-pun
the pointer-to-hash into an object_id struct.
But we can make this even simpler by observing that the sort operation
doesn't need the object id at all! We only need them one at a time while
we actually process each entry. So we can just omit the oid from the
struct entirely and load it on the fly into a local variable in the
second loop.
This gets rid of the type-punning, and lets us directly use the more
type-safe nth_packed_object_id(), simplifying the code. And as a bonus,
it saves 8 bytes of memory per object.
Note that this does mean we'll do the offset lookup for each object
before the oid lookup. The oid lookup has more safety checks in it
(e.g., for looking past p->num_objects) which in theory protected the
offset lookup. But since violating those checks was already a BUG()
condition (as described in the previous commit), it's not worth worrying
about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
