When showing only one branch a lot of default output becomes redundant,
so clean it up a bit, and document what is shown. Retire the earlier
implementation "git-show-branches-script".
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'git show-branches' command turns out to be reasonably useful,
but painfully slow. So rewrite it in C, using ideas from merge-base
while enhancing it a bit more.
- Unlike show-branches, it can take --heads (show me all my
heads), --tags (show me all my tags), or --all (both).
- It can take --more=<number> to show beyond the merge-base.
- It shows the short name for each commit in the extended SHA1
syntax.
- It can find merge-base for more than two heads.
Examples:
$ git show-branch --more=6 HEAD
is almost the same as "git log --pretty=oneline --max-count=6".
$ git show-branch --merge-base master mhf misc
finds the merge base of the three given heads.
$ git show-branch master mhf misc
shows logs from the top of these three branch heads, up to their
common ancestor commit is shown.
$ git show-branch --all --more=10
is poor-man's gitk, showing all the tags and heads, and
going back 10 commits beyond the merge base of those refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We always show the diff as an absolute path, but pathnames to diff are
taken relative to the current working directory (and if no pathnames are
given, the default ends up being all of the current working directory).
Note that "../xyz" also works, so you can do
cd linux/drivers/char
git diff ../block
and it will generate a diff of the linux/drivers/block changes.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Often I find myself wanting to do quick branches check when I am
not in the windowing environment and cannot run gitk.
This stupid script shows commits leading to the heads of
interesting branches with indication which ones belong to which
branches, so that fork point is somewhat discernible without
using gitk.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tools directory being separate is just a historical
coincidence. Build and install together with the main
directory, just like the clean target does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use <tab> instead of two spaces uniformly in the Makefile, even in the
ifdefs. Gives it a nice consistent look.
[jc: At the same time I indented the nested ifdefs to make them
slightly easier to read.]
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$DESTDIR is more usual during the build than $dest and is what
is usually used in the makefiles, so let's use it too.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames COPTS to CFLAGS, because it's COPTS that was user
overridable. Also, -Wall is moved there because it's optional. What
was CFLAGS is now ALL_CFLAGS, which users should not override.
Defines are added to DEFINES. Since ALL_CFLAGS is recursively expanded,
it uses the final value of DEFINES.
Implicit rules are made explicit since the implicit rules use CFLAGS
rather than ALL_CFLAGS. I believe that serious projects should not rely
on implicit rules anyway. Percent rules are used because they are used
already and because they don't need the .SUFFIXES target.
[jc: in addition to updating the patch for 0.99.4, I fixed up a
glitch in Pavel's original patch which compiled sha1.o out of
mozilla-sha1/sha1.c, where it should have left the resulting
object file in mozilla-sha1 directory for later "ar".]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merges commit
c35a7b8d806317dc1762e36561cbd31c2530dd9c
from master into our head commit
edee414c3e5a546aae3dd1529f397df949713305
Sincerely,
jit-merge command.
Given one existing commit, revert the change the patch
introduces, and record a new commit that records it. This
requires your working tree to be clean (no modifications from
the HEAD commit).
This is based on what Linus posted to the list, with
enhancements he suggested, including the use of -M to attempt
reverting renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merges commit
f10e0e0b18c8e2e69535e7380fb3c1f9b097cfda
from master into our head commit
c3958a7926ab20b90fe0767580b466698477f5b6
Sincerely,
jit-merge command.
RPM folks have problem installing the package otherwise. Since
its usefulness does have much to do with GIT, downgrade it to
"contrib" status for now. We may want to move it to contrib/
subdirectory after auditing other programs when we reorganize
the source tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merges commit
3c4e8a636f4de3668b24d0020df731cdc78ae6e9
from master into our head commit
80f45687f44b6258b0eacae6b1ae15e3ad4a6552
Sincerely,
jit-merge command.
Run install-tools target to install the tools to accept e-mail
patches. Also clean up the main Makefile a bit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is my first attempt to adjust Debian and RPM to pass
prefix, to prepare the 0.99.4 release.
It updates debian/rules and git-core.spec.in to properly pass
prefix when building binary packages. It also updates
debian/changelog to make the resulting binary package name
0.99.4; this is not needed on the RPM side (it takes the version
number from the main Makefile).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Per discussion with people interested in binary packaging,
change the default template location from /etc/git-core to
/usr/share/git-core hierarchy. If a user wants to run git
before installing for whatever reason, in addition to adding
$src to the PATH environment variable, git-init-db can be run
with --template=$src/templates/blt/ parameter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Everybody envies rev-parse, who is the only one that can grok
the extended sha1 format. Move the get_extended_sha1() out of
rev-parse, rename it to get_sha1() and make it available to
everybody else.
The one I posted earlier to the list had one bug where it did
not handle a name that ends with a digit correctly (it
incorrectly tried the "Nth parent" path). This commit fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The king penguin said:
It has no point any more, all the tools check the file
status on their own, and yes, the thing should probably be
removed.
and the faithful servant makes it so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A template mechanism to populate newly initialized repository
with default set of files is introduced. Use it to ship example
hooks that can be used for update and post update checks, as
Josef Weidendorfer suggests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is based off of GregKH's script, send-lots-of-email.pl, and strives to do
all the nice things a good subsystem maintainer does when forwarding a patch or
50 upstream:
All the prior handlers of the patch, as determined by the
Signed-off-by: lines, and/or the author of the commit, are cc:ed on the
email.
All emails are sent as a reply to the previous email, making it easy to
skip a collection of emails that are uninteresting.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Things have slowly but surely started to settle down, and the
http transport finally can natively grok packed repositories.
To give Pasky a good anchor point, hoping that he can start
split off the core part from Cogito, here is the 0.99.3, which
will be accompanied with its own tag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just before updating a ref,
$GIT_DIR/hooks/update refname old-sha1 new-sha1
is called if executable. The hook can decline the ref to be
updated by exiting with a non-zero status, or allow it to be
updated by exiting with a zero status. The mechanism also
allows e.g sending of a mail with pushed commits on the remote
repository.
Documentation update with an example hook is included.
jc: The credits of the basic idea and initial implementation go
to Josef, but I ended up rewriting major parts of his patch, so
bugs are all mine. Also I changed the semantics for the hook
from his original version (which were post-update hook) so that
the hook can optionally decline to update the ref, and also can
be used to implement the overall cleanups. The latter was
primarily to implement a suggestion from Linus that calling
update-server-info should be made optional.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This counts the number of unpacked object files and disk space
consumed by them, to help you decide when it is a good time to
repack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Implement fetching from a packed repository over http/https
using the dumb server support files.
I consider some parts of the logic should be in a separate C
program, but it appears to work with my simple tests. I have
backburnered it for a bit too long for my liking, so let's throw
it out in the open and see what happens.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch implements Linus' idea that if you are not interested in
pulling by HTTP, you can now say
NO_CURL=1 make
to compile everything except git-http-pull (thus not needing curl at all).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a new "git bisect" command.
- "git bisect start"
start bisection search.
- "git bisect bad <rev>"
mark some version known-bad (if no arguments, then current HEAD)
- "git bisect good <revs>..."
mark some versions known-good (if no arguments, then current HEAD)
- "git bisect reset <branch>"
done with bisection search and go back to your work (if
no arguments, then "master").
The way you use it is:
git bisect start
git bisect bad # Current version is bad
git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version
# tested that was good
When you give at least one bad and one good versions, it will
bisect the revision tree and say something like:
Bisecting: 675 revisions left to test after this
and check out the state in the middle. Now, compile that kernel, and boot
it. Now, let's say that this booted kernel works fine, then just do
git bisect good # this one is good
which will now say
Bisecting: 337 revisions left to test after this
and you continue along, compiling that one, testing it, and depending on
whether it is good or bad, you say "git bisect good" or "git bisect bad",
and ask for the next bisection.
Until you have no more left, and you'll have been left with the first bad
kernel rev in "refs/bisect/bad".
Oh, and then after you want to reset to the original head, do a
git bisect reset
to get back to the master branch, instead of being in one of the bisection
branches ("git bisect start" will do that for you too, actually: it will
reset the bisection state, and before it does that it checks that you're
not using some old bisection branch).
Not really any harder than doing series of "quilt push" and "quilt pop",
now is it?
[jc: This patch is a rework based on what Linus posted to the
list. The changes are:
- The original introduced four separate commands, which was
three too many, so I merged them into one with subcommands.
- Since the next thing you would want to do after telling it
"bad" and "good" is always to bisect, this version does it
automatically for you.
- I think the termination condition was wrong. The original
version checked if the set of revisions reachable from next
bisection but not rechable from any of the known good ones
is empty, but if the current bisection was a bad one, this
would not terminate, so I changed it to terminate it when
the set becomes a singleton or empty.
- Removed the use of shell array variable.
]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate the process of building the commands to compilation and
linkage. This makes it more consistent with the library objects, is the
traditional thing to do, and significantly speeds up the subsequent
rebuilds, especially for us the people who develop git on 300MHz
notebooks.
Ported from Cogito.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Support for completely OpenSSL-less builds. FSF considers distributing GPL
binaries with OpenSSL linked in as a legal problem so this is trouble
e.g. for Debian, or some people might not want to install OpenSSL
anyway. If you
make NO_OPENSSL=1
you get completely OpenSSL-less build, disabling --merge-order and using
Mozilla's SHA1 implementation.
Ported from Cogito.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Makefile rules were massively reordered so that they are actually
logically grouped now. Captions were added to separate the sections. No
rule contents was touched during the process.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove about one gazillion of explicit dependency rules with few lines
describing the general dependency pattern and then the exceptions. This
noticably shortens the Makefile and makes it easier to touch it.
This is part of the Cogito Makefile changes port.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Describe variables which make itself takes and adjusts compilation
accordingly (MOZILLA_SHA1, NO_OPENSSL, PPC_SHA1), and make adding
defines more convenient through the $DEFINES variable. $COPTS includes
-g as well now and is not overriden if it was already declared in the
environment. Also, $CFLAGS is appended to rather than reset, so that if
there was already a $CFLAGS environment variable, it's appended to. Some
more variables are also made overridable through the environment. Renamed
$bin to $bindir which is the name commonly used for this.
This is part of the Cogito Makefile changes port.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On older Mac OS X (10.2.8), no socklen_t is defined, and therefore
daemon.c does not compile. However, Mac OS X 10.4 seems to define
socklen_t differently.
Also, linking fails due to some symbols defined in libssl (not just
libcrypto).
[jc: I am tentatively dropping the socklen_t part of the patch
because I am waiting for confirmation on the server side IPV6
patch from Yoshifuji-san]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short message requesting a pull from the repository is also included.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's stupid. We'd want to rename directories too, but this doesn't do
that yet - easy enough to do per se, we just need to carefully list all
the pathnames that got moved (and remember to ignore the files that
weren't tracked but are in the subdirectory that got moved).
Doing the directory case will require a bit more scripting.. Something like
oldfiles=($(git-ls-files | grep '^$src'))
newfiles=($(git-ls-files | sed ':^$src: s:^$src:$dst:'))
mv $src $dst && git-update-cache --add --remove -- "${oldfiles[@]}" "${newfiles[@]}"
might do it, except it needs to be done right, and carefully. Methinks
perl is probably better at this. Hint hint..
Using the information prepared with update-server-info, a truly
dumb http server can allow cloning with this client side
support.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The git-update-server-info command prepares informational files
to help clients discover the contents of a repository, and pull
from it via a dumb transport protocols. Currently, the
following files are produced.
- The $repo/info/refs file lists the name of heads and tags
available in the $repo/refs/ directory, along with their
SHA1. This can be used by git-ls-remote command running on
the client side.
- The $repo/info/rev-cache file describes the commit ancestry
reachable from references in the $repo/refs/ directory. This
file is in an append-only binary format to make the server
side friendly to rsync mirroring scheme, and can be read by
git-show-rev-cache command.
- The $repo/objects/info/pack file lists the name of the packs
available, the interdependencies among them, and the head
commits and tags contained in them. Along with the other two
files, this is designed to help clients to make smart pull
decisions.
The git-receive-pack command is changed to invoke it at the end,
so just after a push to a public repository finishes via "git
push", the server info is automatically updated.
In addition, building of the rev-cache file can be done by a
standalone git-build-rev-cache command separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
