The following sequence of commands reveals an issue with error
reporting of relative paths:
$ mkdir sub
$ cd sub
$ git ls-files --error-unmatch ../bbbbb
error: pathspec 'b' did not match any file(s) known to git.
$ git commit --error-unmatch ../bbbbb
error: pathspec 'b' did not match any file(s) known to git.
This bug is visible only if the normalized path (i.e., the relative
path from the repository root) is longer than the prefix.
Otherwise, the code skips over the normalized path and reads from
an unused memory location which still contains a leftover of the
original command line argument.
So instead, use the existing facilities to deal with relative paths
correctly.
Also fix inconsistency between "checkout" and "commit", e.g.
$ cd Documentation
$ git checkout nosuch.txt
error: pathspec 'Documentation/nosuch.txt' did not match...
$ git commit nosuch.txt
error: pathspec 'nosuch.txt' did not match...
by propagating the prefix down the codepath that reports the error.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
Templates should be just that: A form that the user fills out, and forms
have blanks. If people are attached to not having extra whitespace in the
editor, they can simply clean up their templates.
Added test with editor adding even more whitespace.
Signed-off-by: Boris Faure <billiob@gmail.com>
Based-on-patch-by:Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --interactive flag is already shared by git add and git commit,
share the -p and --patch flags too.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git commit --interactive feel more like git add --interactive by
allowing the user to restrict the list of files they have to deal with.
A test in t7501 used to ensure that this is not allowed; no need for that
anymore.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behaviour of git commit --interactive so that when you abort
the commit (by leaving the commit message empty) the index remains
unchanged.
Hitherto an aborted commit --interactive has added the selected hunks to
the index regardless of whether the commit succeeded or not.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we had to refresh the index internally before running diff or status,
we opportunistically updated the $GIT_INDEX_FILE so that later invocation
of git can use the lstat(2) we already did in this invocation.
Make them share a helper function to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Please enter the commit message for your changes."
message. Several tests in t7500-commit.sh and t7502-commit.sh assume
that this message starts with a newline. Change the tests to to skip
under GETTEXT_POISON=YesPlease.
These fail under GETTEXT_POISON=YesPlease because the poison editor
message doesn't do the right thing with comments and line breaks, so
these messages will be incorrectly broken up across lines.
This test should not be skipped under a hypothetical future testing
mode that tests Git under language locales, since those messages
should all start with a newline like the original.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "(root-commit)" and "detached HEAD" fragments that
appear when you commit either the root commit, or a commit in a
detached head translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You are in the middle of a merge -- cannot amend."
message. Several tests in t7110-reset-merge.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status code is used to provide a reminder of changes included and
not included for the commit message template opened in the operator's
text editor by "git commit". Therefore each line of its output begins
with the comment character "#":
# Please enter the commit message for your changes. Lines starting
Use the new status_printf{,_ln,_more} functions to take care of adding
"#" to the beginning of such status lines automatically. Using these
will have two advantages over the current code:
- The obvious one is to force separation of the "#" from the
translatable part of the message when git learns to translate its
output.
- Another advantage is that this makes it easier for us to drop "#"
prefix in "git status" output in later versions of git if we want
to.
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of maintaining a local variable for it, use s->fp to keep
track of where the commit message template should be written.
This prepares us to take advantage of the status_printf functions,
which use a struct wt_status instead of a FILE pointer to determine
where to send their output.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30,
2007-11-08), a subtle bug in --template was introduced. If the
file named by a --template parameter is missing, previously git
would error out with a message:
Commit template file does not exist.
but in the C version the --template parameter gets ignored and
the default template is used.
t7500 has two tests for this case which would have caught it, except
that with the default $EDITOR, the commit message template is left
unmodified, causing 'git commit' to error out and the test to
succeed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after
a conflicting cherry-pick. While this would preserve the original
commit's authorship, it would sadly discard cherry-pick's carefully
crafted MERGE_MSG (which contains the list of conflicts as well as the
original commit-id in the case of cherry-pick -x).
On the other hand, if a bare 'commit' were performed, it would preserve
the MERGE_MSG while resetting the authorship.
In other words, there was no way to simultaneously take the authorship
from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
This change fixes that situation. A bare 'commit' will now take the
authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG.
If the user wishes to reset authorship, that must now be done explicitly
via --reset-author.
A side-benefit of passing commit authorship along this way is that we
can eliminate redundant authorship parsing code from revert.c.
(Also removed an unused include from revert.c)
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick conflicts git advises:
$ git commit -c <original commit id>
to preserve the original commit message and authorship. Instead, let's
record the original commit id in CHERRY_PICK_HEAD and advise:
$ git commit -c CHERRY_PICK_HEAD
A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part.
Note that we record CHERRY_PICK_HEAD even in the case where there
are no conflicts so that we may use it to communicate authorship to
commit; this will then allow us to remove set_author_ident_env from
revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit
is used, as presumably the user intends to further edit the commit
and possibly even cherry-pick additional commits on top.
Tests and documentation contributed by Jonathan Nieder.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For its post-commit summary, commit was explicitly setting
the default rename limit to 100. Presumably when the code
was added, it was necessary to do so. These days, however,
it will fall back properly to the diff default, and that
default has long since changed from 100.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They differ by one character only. Being exactly equal should help
translations.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also removes the superfluous "specify" and rewords the misleading
"if any" which sounds as if omitting "-m" would omit the merge commit
message. (It means "if a merge commit is created at all".)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push has the clearer description, so take that one for all.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the message advises to fix the configuration first, the
advantage of using this command is that it is cut-and-paste ready,
while using --author='...' requires the user to type his name and
email again.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When determine_author_info() returns to the calling prepare_to_commit(),
we already know the pieces of information necessary to determine what
author ident will be used in the final message, but deferred making a call
to fmt_ident() before the final commit_tree(). Most importantly, we would
open the editor to ask the user to compose the log message before it.
As one important side effect of fmt_ident() is to error out when the given
information is malformed, this resulted in us spawning the editor first
and then refusing to commit due to error, even though we had enough
information to detect the error before starting the editor, which was
annoying.
Move the fmt_ident() call to the end of determine_author_info() where we
have final determination of author info to rectify this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be quiet". Also make use
of the macro in a place that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be verbose". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"squash! ..." where "..." is the subject line of the specified commit
message. This option can be used with other commit message options
such as -m, -c, -C and -F.
If an editor is invoked (as with -c or -eF or no message options) the
commit message is seeded with the correctly formatted subject line.
Example usage:
$ git commit --squash HEAD~2
$ git commit --squash HEAD~2 -m "clever comment"
$ git commit --squash HEAD~2 -F msgfile
$ git commit --squash HEAD~2 -C deadbeef
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"fixup! ..." where "..." is the subject line of the specified commit
message.
Example usage:
$ git commit --fixup HEAD~2
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin/commit.c: Replace block of code with a one-liner call to
logmsg_reencode().
* commit.c: new function for looking up a comit by name
* pretty.c: helper methods for getting output encodings
Add helpers get_log_output_encoding() and
get_commit_output_encoding() that eliminate some messy and duplicate
if-blocks.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" and "git commit" read .git/config and .gitmodules before
parsing options, but there is no reason to access a repository at all
when the caller just wanted to know what arguments are accepted.
[jn: rewrote the log message and added test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
Clemens Buchacher
Junio C Hamano
Boris Faure
Conrad Irwin
Ævar Arnfjörð Bjarmason
Jonathan Nieder
Jay Soffian
Jeff King
Michael J Gruber
Matthieu Moy
Aleksi Aalto
René Scharfe
Pat Notz
Nguyễn Thái Ngọc Duy