Hotfix for a topic of this cycle.
* ma/maintenance-crontab-fix:
t7900-maintenance: test for magic markers
gc: fix handling of crontab magic markers
git-maintenance.txt: add missing word
Test coverage fix.
* js/no-more-prepare-for-main-in-test:
tests: drop the `PREPARE_FOR_MAIN_BRANCH` prereq
t9902: use `main` as initial branch name
t6302: use `main` as initial branch name
t5703: use `main` as initial branch name
t5510: use `main` as initial branch name
t5505: finalize transitioning to using the branch name `main`
t3205: finalize transitioning to using the branch name `main`
t3203: complete the transition to using the branch name `main`
t3201: finalize transitioning to using the branch name `main`
t3200: finish transitioning to the initial branch name `main`
t1400: use `main` as initial branch name
"git pack-redandant" when there is only one packfile used to crash,
which has been corrected.
* jx/pack-redundant-on-single-pack:
pack-redundant: fix crash when one packfile in repo
The logic added to check for negative pathspec match by c0192df630
(refspec: add support for negative refspecs, 2020-09-30) looks at
refspec->src assuming it is never NULL, however when
remote.origin.push is set to ":", then refspec->src is NULL,
causing a segfault within strcmp.
Tell git to handle matching refspec by adding the needle to the
set of positively matched refspecs, since matching ":" refspecs
match anything as src.
Add test for matching refspec pushes fetch-negative-refspec
both individually and in combination with a negative refspec.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we insert our "BEGIN" and "END" markers into the cron table, it's
so that a Git version from many years into the future would be able to
identify this region in the cron table. Let's add a test to make sure
that these markers don't ever change.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On `git maintenance start`, we add a few entries to the user's cron
table. We wrap our entries using two magic markers, "# BEGIN GIT
MAINTENANCE SCHEDULE" and "# END GIT MAINTENANCE SCHEDULE". At a later
`git maintenance stop`, we will go through the table and remove these
lines. Or rather, we will remove the "BEGIN" marker, the "END" marker
and everything between them.
Alas, we have a bug in how we detect the "END" marker: we don't. As we
loop through all the lines of the crontab, if we are in the "old
region", i.e., the region we're aiming to remove, we make an early
`continue` and don't get as far as checking for the "END" marker. Thus,
once we've seen our "BEGIN", we remove everything until the end of the
file.
Rewrite the logic for identifying these markers. There are four cases
that are mutually exclusive: The current line starts a region or it ends
it, or it's firmly within the region, or it's outside of it (and should
be printed).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segmentation fault.
The bug is caused by dereferencing `new_branch_info->commit` when it is
`NULL`, which is the case when the tree-ish argument is actually a tree,
not a commit-ish. This was introduced in 5602b500c3 (builtin/checkout:
fix `git checkout -p HEAD...` bug, 2020-10-07), where we tried to ensure
that the special tree-ish `HEAD...` is handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff -I<pattern> -exit-code" should exit with 0 status when
all the changes match the ignored pattern, but it didn't.
* jc/diff-I-status-fix:
diff: correct interaction between --exit-code and -I<pattern>
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
Code clean-up.
* jk/oid-array-cleanup:
commit-graph: use size_t for array allocation and indexing
commit-graph: replace packed_oid_list with oid_array
commit-graph: drop count_distinct_commits() function
oid-array: provide a for-loop iterator
oid-array: make sort function public
cache.h: move hash/oid functions to hash.h
t0064: make duplicate tests more robust
t0064: drop sha1 mention from filename
oid-array.h: drop sha1 mention from header guard
Command `git pack-redundant --all` will crash if there is only one
packfile in the repository. This is because, if there is only one
packfile in local_packs, `cmp_local_packs` will do nothing and will
leave `pl->unique_objects` as uninitialized.
Also add testcases for repository with no packfile and one packfile
in t5323.
Reported-by: Daniel C. Klauer <daniel.c.klauer@web.de>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8164360fc8 (t9902: prepare a test for the upcoming default branch
name, 2020-10-23), we started adjusting this test script for the default
initial branch name changing to `main`.
However, there is no need to wait for that: let's adjust the test script
to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from one test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 66713e84e7 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we started adjusting this test script for the default
initial branch name changing to `main`.
However, there is no need to wait for that: let's adjust the test script
to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from six test cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 97cf8d50b5 (t5703: adjust a test case for the upcoming default
branch name, 2020-10-23), we prepared this test script for a world when
the default initial branch name would be `main`.
However, there is no need to wait for that: let's adjust the test script
to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from one test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 66713e84e7 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we prepared this test script for a time when the
default initial branch name would be `main`.
However, there is no need to wait for that: let's adjust the test script
to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from two test cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 66713e84e7 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we started that transition, trying to prepare for a
time when `git init` would use that name for the initial branch.
Even if that time has not arrived, we can complete the transition by
making the test script independent of the default branch name. This also
allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq from four test
cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 66713e84e7 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we started that transition, trying to prepare for a
time when `git init` would use that name for the initial branch.
Even if that time has not arrived, we can complete the transition by
making the test script independent of the default branch name. This also
allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq from one test
case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 66713e84e7 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we started that transition, trying to prepare for a
time when `git init` would use that name for the initial branch.
Even if that time has not arrived, we can complete the transition by
making the test script independent of the default branch name. This also
allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq from one test
case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 66713e84e7 (tests: prepare aligned mentions of the default branch
name, 2020-10-23), we started that transition, trying to prepare for a
time when `git init` would use that name for the initial branch.
Even if that time has not arrived, we can complete the transition by
making the test script independent of the default branch name. This also
allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq from one test
case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 56300ff356 (t3200: prepare for `main` being shorter than `master`,
2020-10-23) and in 66713e84e7 (tests: prepare aligned mentions of the
default branch name, 2020-10-23), we started to prepare t3200 for a new
world where `git init` uses the branch name `main` for the initial
branch.
We do not even have to wait for that new world: we can easily ensure
that that branch name is used, independent of the exact name `git init`
will give the initial branch, so let's do that.
This also lets us remove the `PREPARE_FOR_MAIN_BRANCH` prereq from three
test cases in that script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 3224b0f0bb (t1400: prepare for `main` being default branch name,
2020-10-23), we prepared t1400 for a time when the default initial
branch name would be `main`.
However, there is no need to wait that long: let's adjust the test
script to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from two test cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like "git diff -w --exit-code" should exit with 0 when ignoring
whitespace differences results in no changes shown, if ignoring
certain changes with "git diff -I<pattern> --exit-code" result in an
empty patch, we should exit with 0.
The test suite did not cover the interaction between "--exit-code"
and "-w"; add one while adding a new test for "--exit-code" + "-I".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_perf() runs each test in its own subshell which makes it difficult
to persist variables between tests. test_export() addresses this
shortcoming by grabbing the values of specified variables after a test
runs but before the subshell exits, and writes those values to a file
which is loaded into the environment of subsequent tests.
To grab the values to be persisted, test_export() pipes the output of
the shell's builtin `set` command through `sed` which plucks them out
using a regular expression along the lines of `s/^(var1|var2)/.../p`.
Unfortunately, though, this use of alternation is not portable. For
instance, BSD-lineage `sed` (including macOS `sed`) does not support it
in the default "basic regular expression" mode (BRE). It may be possible
to enable "extended regular expression" mode (ERE) in some cases with
`sed -E`, however, `-E` is neither portable nor part of POSIX.
Fortunately, alternation is unnecessary in this case and can easily be
avoided, so replace it with a series of simple expressions such as
`s/^var1/.../p;s/^var2/.../p`.
While at it, tighten the expressions so they match the variable names
exactly rather than matching prefixes (i.e. use `s/^var1=/.../p`).
If the requirements of test_export() become more complex in the future,
then an alternative would be to replace `sed` with `perl` which supports
alternation on all platforms, however, the simple elimination of
alternation via multiple `sed` expressions suffices for the present.
Reported-by: Sangeeta <sangunb09@gmail.com>
Diagnosed-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test update.
* js/t5526-with-no-particular-primary-branch-name:
t5526: drop the prereq expecting the default branch name `main`
t5526: avoid depending on a specific default branch name
Tighten error checking in the codepath that responds to "git fetch".
* jk/check-config-parsing-error-in-upload-pack:
upload-pack: propagate return value from object filter config callback
"@" sometimes worked (e.g. "git push origin @:there") as a part of
a refspec element, but "git push origin @" did not work, which has
been corrected.
* fc/atmark-in-refspec:
refspec: make @ a synonym of HEAD
tests: push: trivial cleanup
tests: push: improve cleanup of HEAD tests
"git $cmd $args", when $cmd is not a recognised subcommand, by
default tries to see if $cmd is a typo of an existing subcommand
and optionally executes the corrected command if there is only one
possibility, depending on the setting of help.autocorrect; the
users can now disable the whole thing, including the cycles spent
to find a likely typo, by setting the configuration variable to
'never'.
* dd/help-autocorrect-never:
help.c: help.autocorrect=never means "do not compute suggestions"
To give ample warning for users wishing to override Git's the fall-back
for an unconfigured `init.defaultBranch` (in case we decide to change it
in a future Git version), let's introduce some advice that is shown upon
`git init` when that value is not set.
Note: two test cases in Git's test suite want to verify that the
`stderr` output of `git init` is empty. It is now necessary to suppress
the advice, we now do that via the `init.defaultBranch` setting. While
not strictly necessary, we also set this to `false` in
`test_create_repo()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one of the next commits, we would like to give users some advice
regarding the initial branch name, and how to modify it.
To that end, it would be good if `git branch -m <name>` worked in a
freshly initialized repository without any commits. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use --fixed-value in git-config calls in the git-maintenance tests, so
that the tests will continue to work even if the repo path contains
regexp metacharacters.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git maintenance run/start/stop" needed to be run in a repository
to hold the lockfile they use, but didn't make sure they are
actually in a repository, which has been corrected.
* rs/maintenance-run-outside-repo:
t7900: fix typo: "test_execpt_success"
maintenance: fix SEGFAULT when no repository
The transport layer was taught to optionally exchange the session
ID assigned by the trace2 subsystem during fetch/push transactions.
* js/trace2-session-id:
receive-pack: log received client session ID
send-pack: advertise session ID in capabilities
upload-pack, serve: log received client session ID
fetch-pack: advertise session ID in capabilities
transport: log received server session ID
serve: advertise session ID in v2 capabilities
receive-pack: advertise session ID in v0 capabilities
upload-pack: advertise session ID in v0 capabilities
trace2: add a public function for getting the SID
docs: new transfer.advertiseSID option
docs: new capability to advertise session IDs
"git apply" adjusted the permission bits of working-tree files and
directories according core.sharedRepository setting by mistake and
for a long time, which has been corrected.
* mt/do-not-use-scld-in-working-tree:
apply: don't use core.sharedRepository to create working tree files
"git maintenance" command had trouble working in a directory whose
pathname contained an ERE metacharacter like '+'.
* ds/maintenance-part-3:
maintenance: use 'git config --fixed-value'
Various subcommands of "git config" that takes value_regex
learn the "--literal-value" option to take the value_regex option
as a literal string.
* ds/config-literal-value:
config doc: value-pattern is not necessarily a regexp
config: implement --fixed-value with --get*
config: plumb --fixed-value into config API
config: add --fixed-value option, un-implemented
t1300: add test for --replace-all with value-pattern
t1300: test "set all" mode with value-pattern
config: replace 'value_regex' with 'value_pattern'
config: convert multi_replace to flags
Processes that access packdata while the .idx file gets removed
(e.g. while repacking) did not fail or fall back gracefully as they
could.
* tb/idx-midx-race-fix:
midx.c: protect against disappearing packs
packfile.c: protect against disappearing indexes
"git update-ref --stdin" learns to take multiple transactions in a
single session.
* ps/update-ref-multi-transaction:
update-ref: disallow "start" for ongoing transactions
p1400: use `git-update-ref --stdin` to test multiple transactions
update-ref: allow creation of multiple transactions
t1400: avoid touching refs on filesystem
"git add -i" failed to honor custom colors configured to show
patches, which has been corrected.
* js/add-i-color-fix:
add -i: verify in the tests that colors can be overridden
add -p: prefer color.diff.context over color.diff.plain
add -i (Perl version): color header to match the C version
add -i (built-in): use the same indentation as the Perl version
add -p (built-in): do not color the progress indicator separately
add -i (built-in): use correct names to load color.diff.* config
add -i (built-in): prevent the `reset` "color" from being configured
add -i: use `reset_color` consistently
add -p (built-in): imitate `xdl_format_hunk_hdr()` generating hunk headers
add -i (built-in): send error messages to stderr
add -i (built-in): do show an error message for incorrect inputs
To allow us to consider a change in the default behavior of `git init`
where it uses a more inclusive name for the initial branch, we must
first teach the test suite not to rely on a specific default branch
name. In this patch, we teach t7064 that trick.
To that end, we set a specific name for the initial branch. Ideally, we
would simply start out by calling `git branch -M initial-branch`, but
there is a bug in `git branch -M` that does not allow renaming branches
unless they already have commits. This will be fixed in the
`js/init-defaultbranch-advice` topic, and until that time, we use the
equivalent (but less intuitive) `git checkout -f --orphan`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Nipunn Koorapati
Martin Ågren
Johannes Schindelin
Jiang Xin
Eric Sunshine
Josh Steadmon