You may want to run the test suite with a different shell
than you use to build Git. For instance, you may build with
SHELL_PATH=/bin/sh (because it's faster, or it's what you
expect to exist on systems where the build will be used) but
want to run the test suite with bash (e.g., since that
allows using "-x" reliably across the whole test suite).
There's currently no good way to do this.
You might think that doing two separate make invocations,
like:
make &&
make -C t SHELL_PATH=/bin/bash
would work. And it _almost_ does. The second make will see
our bash SHELL_PATH, and we'll use that to run the
individual test scripts (or tell prove to use it to do so).
So far so good.
But this breaks down when "--tee" or "--verbose-log" is
used. Those options cause the test script to actually
re-exec itself using $SHELL_PATH. But wait, wouldn't our
second make invocation have set SHELL_PATH correctly in the
environment?
Yes, but test-lib.sh sources GIT-BUILD-OPTIONS, which we
built during the first "make". And that overrides the
environment, giving us the original SHELL_PATH again.
Let's introduce a new variable that lets you specify a
specific shell to be run for the test scripts. Note that we
have to touch both the main and t/ Makefiles, since we have
to record it in GIT-BUILD-OPTIONS in one, and use it in the
latter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch automates the process of determining which tests failed
previously and re-running them.
While developing patch series, it is a good practice to run the test
suite from time to time, just to make sure that obvious bugs are caught
early. With complex patch series, it is common to run `make -j15 -k
test`, i.e. run the tests in parallel and *not* stop at the first
failing test but continue. This has the advantage of identifying
possibly multiple problems in one big test run.
It is particularly important to reduce the turn-around time thusly on
Windows, where the test suite spends 45 minutes on the computer on which
this patch was developed.
It is the most convenient way to determine which tests failed after
running the entire test suite, in parallel, to look for left-over "trash
directory.t*" subdirectories in the t/ subdirectory. However, those
directories might live outside t/ when overridden using the
--root=<directory> option, to which the Makefile has no access. The next
best method is to grep explicitly for failed tests in the test-results/
directory, which the Makefile *can* access.
Please note that the often-recommended `prove` tool requires Perl, and
that opens a whole new can of worms on Windows. As no native Windows Perl
comes with Subversion bindings, we have to use a Perl in Git for Windows
that uses the POSIX emulation layer named MSYS2 (which is a portable
version of Cygwin). When using this emulation layer under stress, e.g.
when running massively-parallel tests, unexplicable crashes occur quite
frequently, and instead of having a solution to the original problem, the
developer now has an additional, quite huge problem. For that reason, this
developer rejected `prove` as a solution and went with this patch instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some pathnames that are okay on ext4 and on HFS+ cannot be checked
out on Windows. Tests that want to see operations on such paths on
filesystems that support them must do so behind appropriate test
prerequisites, and must not include them in the source tree (instead
they should create them when they run). Otherwise, the source tree
cannot even be checked out.
Make sure that double-quotes, asterisk, colon, greater/less-than,
question-mark, backslash, tab, vertical-bar, as well as any non-ASCII
characters never appear in the pathnames with a new test-lint-* target
as part of a `make test`. To that end, we call `git ls-files` (ensuring
that the paths are quoted properly), relying on the fact that paths
containing non-ASCII characters are quoted within double-quotes.
In case that the source code does not actually live in a Git
repository (e.g. when extracted from a .zip file), or that the `git`
executable cannot be executed, we simply ignore the error for now; In
that case, our trusty Continuous Integration will be the last line of
defense and catch any problematic file name.
Noticed when a topic wanted to add a pathname with '>' in it. A
check like this will prevent a similar problems from happening in the
future.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn has not supported GIT_SVN_NO_OPTIMIZE_COMMITS for
the "set-tree" sub-command in 9 years since commit 490f49ea58
("git-svn: remove optimized commit stuff for set-tree").
So remove this target and TSVN variable to avoid confusion.
ref: http://mid.gmane.org/56C9B7B7.7030406@f2.dion.ne.jp
Helped-by: Kazutoshi Satoda <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the two targets "test-lint-duplicates" and "test-lint-executable" are
currently executed when running the test target. This was done on purpose
when the TEST_LINT variable was added in 81127d74 to avoid twisted shell
scripting by developers only to avoid false positives that might result
from the rather simple minded tests, e.g. test-lint-shell-syntax. But it
looks like it might be better to include all lint tests to help developers
to detect non portable shell constructs before the patch is sent to the
list and reviewed there.
Change the TEST_LINT variable to run all lint test unless the TEST_LINT
variable is overridden. If we hit false positives more often than helping
developers to avoid non-portable code (or add less accurate or slow tests
later) we could still fall back to exclude them like 81127d74 proposed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently only the "t[0-9][0-9][0-9][0-9]-*.sh" scripts are tested for
shell incompatibilities using the check-non-portable-shell.pl script. This
makes it easy to miss non-POSIX constructs added to one of the t/*lib*.sh
helper scripts, as they aren't automatically detected.
Fix that by adding a THELPERS variable containing all shell scripts that
aren't tests and add these to the "test-lint-shell-syntax" target too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, the setting of GIT_CONFIG in the
environment could affect how tests ran. Commit 9c3796f (Fix
setting config variables with an alternative GIT_CONFIG,
2006-06-20) unconditionally set GIT_CONFIG in the Makefile
when running tests to give us a known starting point.
This is insufficient for running the tests outside of the
Makefile, however, and 8565d2d (Make tests independent of
global config files, 2007-02-15) later set GIT_CONFIG
directly in test-lib.sh. At that point the Makefile setting
was redundant, but we never removed it. Let's do so now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When TEST_OUTPUT_DIRECTORY setting is used, it was handled somewhat
inconsistently between the test framework and t/Makefile, and logic
to summarize the results looked at a wrong place.
* jk/test-output:
t/Makefile: don't define TEST_RESULTS_DIRECTORY recursively
test output: respect $TEST_OUTPUT_DIRECTORY
t/Makefile: fix result handling with TEST_OUTPUT_DIRECTORY
Commit 54bb901 (t/Makefile: fix result handling with
TEST_OUTPUT_DIRECTORY - 2013-04-26) incorrectly defined
TEST_RESULTS_DIRECTORY relative to itself, when it should be relative to
TEST_OUTPUT_DIRECTORY. Fix this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d24fbca (Remove Git's support for smoke testing - 2011-12-23)
removed the smoke test support from the test suite but it was
re-added by commit 342e9ef (Introduce a performance testing
framework - 2012-02-17). This appears to be the result of a
mis-rebase, since re-adding the smoke testing infrastructure does
not relate to the subject of that commit.
The current 'smoke' target is broken since the 'harness' script it
uses no longer exists, so just reapply this section of commit d24fbca
and remove all of the smoke testing section in the makefile.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When TEST_OUTPUT_DIRECTORY is set, the test results will be generated in
"$TEST_OUTPUT_DIRECTORY/test-results", which may not be the same as
"test-results" in t/Makefile. This causes the aggregate-results target
to fail as it finds no count files.
Fix this by introducing TEST_RESULTS_DIRECTORY and using it wherever
test-results is referenced.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test Makefile knows about a few "lint" checks for common
errors. However, they are not enabled as part of "make test"
by default, which means that many people do not bother
running them. Since they are both quick to run and accurate
(i.e., no false positives), there should be no harm in
turning them on and helping submitters catch errors earlier.
We could just set:
TEST_LINT = test-lint
to enable all tests. But that would be unnecessarily
annoying later on if we add slower or less accurate tests
that should not be part of the default. Instead, we name the
tests individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the perl script "check-non-portable-shell.pl" to detect
non-portable shell syntax.
"echo -n" is an example of a shell command working on Linux, but not
on Mac OS X.
These shell commands are checked and reported as error:
- "echo -n" (printf should be used)
- "sed -i" (GNUism; use a temp file instead)
- "declare" (bashism, often used with arrays)
- "which" (unreliable exit status and output; use type instead)
- "test a == b" (bashism for "test a = b")
"make test-lint-shell-syntax" can be used to run only the check.
Helped-By: Jeff King <peff@peff.net>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently use a single space before and after the "=" (or ":=", "+=",
etc.) in assignments to make macros. Granted, this was not a big deal,
but I did find the needless inconsistency quite distracting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prove(1) can write a summary of its test results and timings into a
cache file, t/.prove, then use this information during later runs for
various purposes. But deleting t/.prove after every test run defeats
this purpose. So do not delete t/.prove as part of "make
DEFAILT_TEST_TARGET=prove test". (Continue to delete the file on
"make clean".)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm no longer running the Git smoke testing service at
smoke.git.nix.is due to Smolder being a fragile piece of software not
having time to follow through on making it easy for third parties to
run and submit their own smoke tests.
So remove the support in Git for sending smoke tests to
smoke.git.nix.is, it's still easy to modify the test suite to submit
smokes somewhere else.
This reverts the following commits:
Revert "t/README: Add SMOKE_{COMMENT,TAGS}= to smoke_report target" -- e38efac87d
Revert "t/README: Document the Smoke testing" -- d15e9ebc5c
Revert "t/Makefile: Create test-results dir for smoke target" -- 617344d77b
Revert "tests: Infrastructure for Git smoke testing" -- b6b84d1b74
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting from GNU Make 3.82 $(wildcard ...) no longer sorts the result
(from NEWS):
* WARNING: Backward-incompatibility!
Wildcards were not documented as returning sorted values, but the results
have been sorted up until this release.. If your makefiles require sorted
results from wildcard expansions, use the $(sort ...) function to request
it explicitly.
2a59dc32aa
I usually watch test progress visually, and if tests are sorted, even
with make -j4 they go more or less incrementally by their t number. On
the other side, without sorting, tests are executed in seemingly random
order even for -j1. Let's please maintain sane tests order for perceived
prettyness.
Another note is that in GNU Make sort also works as uniq, so after sort
being removed, we might expect e.g. $(wildcard *.sh a.*) to produce
duplicates for e.g. "a.sh". From this point of view, adding sort could
be seen as hardening t/Makefile from accidentally introduced dups.
It turned out that prevous releases of GNU Make did not perform full
sort in $(wildcard), only sorting results for each pattern, that's why
explicit sort-as-uniq is relevant even for older makes.
Signed-off-by: Kirill Smelkov <kirr@navytux.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The valgrind target just reinvokes make with GIT_TEST_OPTS
set to "--valgrind". However, it does this using an
environment variable, which means GIT_TEST_OPTS in your
config.mak would override it, and "make valgrind" would
simply run the test suite without valgrind on.
Instead, we should pass GIT_TEST_OPTS on the command-line,
overriding what's in config.mak, and take care to append to
whatever the user has there already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some common but minor errors we tend to make in
writing test scripts:
1. Scripts are left non-executable. This is not usually
noticed immediately because "make test" does not need
the bit, but it is a matter of git policy to make them
executable (and is a slight convenience when running
individual scripts).
2. Two scripts are allocated the same number. Usually this
happens on separate branches, and the problem only
comes about during a merge. But since there is no
textual conflict, the merger would have to be very
observant to notice.
This is also a minor error, but can make GIT_SKIP_TESTS
ambiguous.
This patch introduces a "test-lint" target which checks
both. It is not invoked by default. You can invoke it as
"make test-lint", or you can make it a prerequisite of
running the tests by specifying "TEST_LINT = test-lint" in
your config.mak or on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can run "make DEFAULT_TEST_TARGET=prove test" to run the test under
"prove" (or $(PROVE) if set). The output is a bit easier to read when
running many tests in parallel.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Liked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in t96xx series (cvsimport) want to write into the control area
(CVSROOT) of their test CVS repositories, but this does not work well when
the source area is made read-only (test trash directories are moved via
--root=else/where option).
Copy the supplied test CVS repository to a scratch place at the beginning
of these tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the smoke target to create a test-results directory. This was
done implicitly by the test-lib before my "test-lib: Don't write
test-results when HARNESS_ACTIVE" patch, but after that smoking from
the pu branch hasn't worked.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smoke server supports a free form text field with comments about a
report, and a comma delimited list of tags. Change the smoke_report
target to expose this functionality. Now smokers can send more data
that explains and categorizes the reports they're submitting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the smoke testing portion of t/Makefile not to include
GIT-BUILD-OPTIONS. It's a shellscript, not a Makefile snippet, so it
had the nasty side-effect of sneaking e.g. SHELL_PATH = '/bin/sh'
(with quotes) everywhere.
Just add our own PERL_PATH variable as a workaround. The t/Makefile
already has e.g. an equivalent SHELL_PATH and TAR option which
duplicate the definitions in GIT-BUILD-OPTIONS.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the capability to send smoke reports from the Git test suite.
Currently we only notice bugs in the test suite when it's run
manually. Bugs in Git that only occur on obscure platforms or setups
that the core developers aren't using can thus go unnoticed.
This series aims to change that. With it, anyone that's interested in
avoiding bitrot in Git can volunteer to run a smoke tester. A smoke
tester periodically compiles the latest version of Git, runs the test
suite, and submits a report to a central server indicating how the
test run went.
A smoke tester might run something like this in cron:
#!/bin/sh
cd ~/g/git
git fetch
for branch in maint master next pu; do
git checkout origin/$i &&
make clean all &&
cd t &&
make smoke_report
done
The smoker might want to compile git with non-default flags, include
bisecting functionality or run the tests under valgrind. Doing that is
outside the scope of this patch, this just adds a report submission
mechanism. But including a canonical smoke runner is something we'll
want to include eventually.
What this does now is add smoke and smoke_report targets to t/Makefile
(this example only uses a few tests for demonstration):
$ make clean smoke
rm -f -r 'trash directory'.* test-results
rm -f t????/cvsroot/CVSROOT/?*
rm -f -r valgrind/bin
rm -f .prove
perl ./harness --git-version="1.7.2.1.173.gc9b40" \
--no-verbose \
--archive="test-results/git-smoke.tar.gz" \
t0000-basic.sh t0001-init.sh t0002-gitfile.sh t0003-attributes.sh t0004-unwritable.sh t0005-signals.sh t0006-date.sh
t0000-basic.sh ....... ok
t0001-init.sh ........ ok
t0002-gitfile.sh ..... ok
t0003-attributes.sh .. ok
t0004-unwritable.sh .. ok
t0005-signals.sh ..... ok
t0006-date.sh ........ ok
All tests successful.
Test Summary Report
-------------------
t0000-basic.sh (Wstat: 0 Tests: 46 Failed: 0)
TODO passed: 5
Files=7, Tests=134, 3 wallclock secs ( 0.06 usr 0.05 sys + 0.23 cusr 1.33 csys = 1.67 CPU)
Result: PASS
TAP Archive created at /home/avar/g/git/t/test-results/git-smoke.tar.gz
The smoke target uses TAP::Harness::Archive to aggregate the test
results into a tarball. The tarball contains two things, the output of
every test file that was run, and a metadata file:
Tarball contents:
$ tar xzvf git-smoke.tar.gz
t0004-unwritable.sh
t0001-init.sh
t0002-gitfile.sh
t0005-signals.sh
t0000-basic.sh
t0003-attributes.sh
t0006-date.sh
meta.yml
A test report:
$ cat t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
A metadata file:
---
extra_properties:
file_attributes:
-
description: t0000-basic.sh
end_time: 1280437324.61398
start_time: 1280437324.22186
-
description: t0001-init.sh
end_time: 1280437325.12346
start_time: 1280437324.62393
-
description: t0002-gitfile.sh
end_time: 1280437325.29428
start_time: 1280437325.13646
-
description: t0003-attributes.sh
end_time: 1280437325.59678
start_time: 1280437325.30565
-
description: t0004-unwritable.sh
end_time: 1280437325.77376
start_time: 1280437325.61003
-
description: t0005-signals.sh
end_time: 1280437325.85426
start_time: 1280437325.78727
-
description: t0006-date.sh
end_time: 1280437326.2362
start_time: 1280437325.86768
file_order:
- t0000-basic.sh
- t0001-init.sh
- t0002-gitfile.sh
- t0003-attributes.sh
- t0004-unwritable.sh
- t0005-signals.sh
- t0006-date.sh
start_time: 1280437324
stop_time: 1280437326
The "extra_properties" hash is where we'll stick Git-specific info,
like whether Git was compiled with gettext or the fallback regex
engine, and what branch we're compiling. Currently no metadata like
this is included.
The entire tarball is then submitted to a central smokebox at
smoke.git.nix.is. This is done with curl(1) via the "smoke_report"
target:
$ make smoke_report
curl \
-H "Expect: " \
-F project=Git \
-F architecture=x86_64 \
-F platform=Linux \
-F revision="1.7.2.1.173.gc9b40" \
-F report_file=@test-results/git-smoke.tar.gz \
http://smoke.git.nix.is/app/projects/process_add_report/1 \
| grep -v ^Redirecting
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 117k 100 63 100 117k 3 6430 0:00:21 0:00:18 0:00:03 0
Reported #8 added.
Reports are then made available on the smokebox via a web interface:
http://smoke.git.nix.is/app/projects/smoke_reports/1
The smoke reports are also mirrored to a Git repository hosted on
GitHub:
http://github.com/gitsmoke/smoke-reports
The Smolder SQLite database that contains metadata about the reports
is also made available:
http://github.com/gitsmoke/smoke-database
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We document how to run prove with the --state option in t/README. This
produces a .prove YAML file in the current directory. Change the t/
gitignore to ignore it, and clean it up on `make clean'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
IRIX 6.5 has a default maximum argument list length of 20480. The file
glob that is passed to aggregate-results currently exceeds this length, and
so the script cannot run successfully. Work around this issue by passing
the file names in via the standard input rather than the argument list.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default the testsuite calls 'diff -u' whenever a file comparison is
called for. Unfortunately that throws a "diff: unknown option '-u'"
error for most non-GNU diffs.
This patch sets GIT_TEST_CMP to 'cmp' on all the architectures where
that happens. The previous version of this patch forgot to export
GIT_TEST_CMP from t/Makefile, which is why 'make test' continued to
fail most tests on most architectures - test-lib.sh was falling back
on its default of `diff -u' for GIT_TEST_CMP. This version of this
patch shows a vast improvement in testsuite results where either GNU
diff is in the path at configure time, or where Makefile knows that
GIT_TEST_CMP=cmp is required.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful if you want to specify GIT_TEST_OPTS that you
always use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring documentation in test-lib and clean target
in Makefile in-line with abc5d372.
Signed-off-by: Emil Sit <sit@emilsit.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to forget running valgrinded tests without -v, and it is
also easy to forget to redirect the output to "tee" (lest the output
scroll out of the terminal's buffer). Running "make valgrind" will
take care of all that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile targets 'aggregate-results' and 'clean' pretended to be
independent. This is not true, of course, since aggregate-results
needs the results _before_ they are removed.
Likewise, the tests should have been run already when the results are
to be aggregated.
However, as it is legitimate to run only a few tests, and then aggregate
just those results, so another target is introduced, that depends on all
tests, then aggregates the results, and only then removes the results.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes 'make' output the aggregated results at the end of each build.
The 'git-test-result' file is removed both before and after each build.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is needed order to aggregate data on the test run later on.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King
Johannes Schindelin
Eric Wong
Jens Lehmann
Junio C Hamano
John Keeping
Torsten Bögershausen
Stefano Lattarini
Michael Haggerty
Thomas Rast
Ævar Arnfjörð Bjarmason
Kirill Smelkov
Michael J Gruber
Jakub Narebski
Brandon Casey
Gary V. Vaughan
Emil Sit
SungHyun Nam
Sverre Rabbelier
Emil Medve