A new global "--no-advice" option can be used to disable all advice
messages, which is meant to be used only in scripts.
* jl/git-no-advice:
t0018: two small fixes
Before discovering the repository details, We used to assume SHA-1
as the "default" hash function, which has been corrected. Hopefully
this will smoke out codepaths that rely on such an unwarranted
assumptions.
* ps/undecided-is-not-necessarily-sha1:
repository: stop setting SHA1 as the default object hash
oss-fuzz/commit-graph: set up hash algorithm
builtin/shortlog: don't set up revisions without repo
builtin/diff: explicitly set hash algo when there is no repo
builtin/bundle: abort "verify" early when there is no repository
builtin/blame: don't access potentially unitialized `the_hash_algo`
builtin/rev-parse: allow shortening to more than 40 hex characters
remote-curl: fix parsing of detached SHA256 heads
attr: fix BUG() when parsing attrs outside of repo
attr: don't recompute default attribute source
parse-options-cb: only abbreviate hashes when hash algo is known
path: move `validate_headref()` to its only user
path: harden validation of HEAD with non-standard hashes
The "--exit-code" option of "git diff" command learned to work with
the "--ext-diff" option.
* rs/external-diff-with-exit-code:
diff: fix --exit-code with external diff
diff: report unmerged paths as changes in run_diff_cmd()
The refs API lost functions that implicitly assumes to work on the
primary ref_store by forcing the callers to pass a ref_store as an
argument.
* ps/refs-without-the-repository:
refs: remove functions without ref store
cocci: apply rules to rewrite callers of "refs" interfaces
cocci: introduce rules to transform "refs" to pass ref store
refs: add `exclude_patterns` parameter to `for_each_fullref_in()`
refs: introduce missing functions that accept a `struct ref_store`
The "whitespace check" task that was enabled for GitHub Actions CI
has been ported to GitLab CI.
* jt/port-ci-whitespace-check-to-gitlab:
gitlab-ci: add whitespace error check
ci: make the whitespace report optional
ci: separate whitespace check script
github-ci: fix link to whitespace error
ci: pre-collapse GitLab CI sections
Git 2.43 started using the tree of HEAD as the source of attributes
in a bare repository, which has severe performance implications.
For now, revert the change, without ripping out a more explicit
support for the attr.tree configuration variable.
* jc/no-default-attr-tree-in-bare:
stop using HEAD for attributes in bare repository by default
The color parsing code learned to handle 12-bit RGB colors, spelled
as "#RGB" (in addition to "#RRGGBB" that is already supported).
* bb/rgb-12-bit-colors:
color: add support for 12-bit RGB colors
t/t4026-color: add test coverage for invalid RGB colors
t/t4026-color: remove an extra double quote character
Command line completion support for zsh (in contrib/) has been
updated to stop exposing internal state to end-user shell
interaction.
* dk/zsh-git-repo-path-fix:
completion: zsh: stop leaking local cache variable
zsh can pretend to be a normal shell pretty well except for some
glitches that we tickle in some of our scripts. Work them around
so that "vimdiff" and our test suite works well enough with it.
* bc/zsh-compatibility:
vimdiff: make script and tests work with zsh
t4046: avoid continue in &&-chain for zsh
When the user responds to a prompt given by "git add -p" with an
unsupported command, list of available commands were given, which
was too much if the user knew what they wanted to type but merely
made a typo. Now the user gets a much shorter error message.
* rj/add-p-typo-reaction:
add-patch: response to unknown command
add-patch: do not show UI messages on stderr
Command line completion script (in contrib/) learned to complete
"git symbolic-ref" a bit better (you need to enable plumbing
commands to be completed with GIT_COMPLETION_SHOW_ALL_COMMANDS).
* rh/complete-symbolic-ref:
completion: add docs on how to add subcommand completions
completion: improve docs for using __git_complete
completion: add 'symbolic-ref'
The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* ps/the-index-is-no-more:
repository: drop `initialize_the_repository()`
repository: drop `the_index` variable
builtin/clone: stop using `the_index`
repository: initialize index in `repo_init()`
builtin: stop using `the_index`
t/helper: stop using `the_index`
The credential helper protocol, together with the HTTP layer, have
been enhanced to support authentication schemes different from
username & password pair, like Bearer and NTLM.
* bc/credential-scheme-enhancement:
credential: add method for querying capabilities
credential-cache: implement authtype capability
t: add credential tests for authtype
credential: add support for multistage credential rounds
t5563: refactor for multi-stage authentication
docs: set a limit on credential line length
credential: enable state capability
credential: add an argument to keep state
http: add support for authtype and credential
docs: indicate new credential protocol fields
credential: add a field called "ephemeral"
credential: gate new fields on capability
credential: add a field for pre-encoded credentials
http: use new headers for each object request
remote-curl: reset headers on new request
credential: add an authtype field
Tests to ensure interoperability between reftable written by jgit
and our code have been added and enabled in CI.
* ps/ci-test-with-jgit:
t0612: add tests to exercise Git/JGit reftable compatibility
t0610: fix non-portable variable assignment
t06xx: always execute backend-specific tests
ci: install JGit dependency
ci: make Perforce binaries executable for all users
ci: merge scripts which install dependencies
ci: fix setup of custom path for GitLab CI
ci: merge custom PATH directories
ci: convert "install-dependencies.sh" to use "/bin/sh"
ci: drop duplicate package installation for "linux-gcc-default"
ci: skip sudo when we are already root
ci: expose distro name in dockerized GitHub jobs
ci: rename "runs_on_pool" to "distro"
Code to write out reftable has seen some optimization and
simplification.
* ps/reftable-write-optim:
reftable/block: reuse compressed array
reftable/block: reuse zstream when writing log blocks
reftable/writer: reset `last_key` instead of releasing it
reftable/writer: unify releasing memory
reftable/writer: refactorings for `writer_flush_nonempty_block()`
reftable/writer: refactorings for `writer_add_record()`
refs/reftable: don't recompute committer ident
reftable: remove name checks
refs/reftable: skip duplicate name checks
refs/reftable: perform explicit D/F check when writing symrefs
refs/reftable: fix D/F conflict error message on ref copy
During the latest v2.45.0 update, 'scalar reconfigure --all' started to
segfault on my machine. Breaking it down via the debugger, it was
faulting on a NULL reference to the_hash_algo, which is a macro pointing
to the_repository->hash_algo.
In my case, this is due to one of my repositories having a detached HEAD,
which requires get_oid_hex() to parse that the HEAD reference is valid.
Another way to cause a failure is to use the "includeIf.onbranch" config
key, which will lead to a BUG() statement.
My first inclination was to try to refactor cmd_reconfigure() to execute
'git for-each-repo' instead of this loop. In addition to the difficulty
of executing 'scalar reconfigure' within 'git for-each-repo', it would
be difficult to perform the clean-up logic for non-existent repos if we
relied on that child process.
Instead, I chose to move the temporary repo to be within the loop and
reinstate the_repository to its old value after we are done performing
logic on the current array item.
Add tests to t9210-scalar.sh to test 'scalar reconfigure --all' with
multiple registered repos. There are two different ways that the old
use of the_repository could trigger bugs. These issues are being solved
independently to be more careful about the_repository being
uninitialized, but the change in this patch around the use of
the_repository is still a good safety precaution.
Co-authored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the three tests that were recently added started their
here-doc with "<<-\EOF", it did not take advantage of that and
instead wrote the here-doc payload abut to the left edge. Use a tabs
to indent these lines.
More importantly, because these all hardcode the expected output,
which contains the current branch name, they break the CI job that
uses 'main' as the default branch name.
Use
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=trunk
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
between the test_description line and ". ./test-lib.sh" line to
force the initial branch name to 'trunk' and expect it to show in
the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an entry in the 'merge-tree' builtin documentation for
-X/--strategy-option (added in 6a4c9e7b32 (merge-tree: add -X strategy
option, 2023-09-24)). The same option is documented for 'merge', 'rebase',
'revert', etc. in their respective Documentation/ files, so let's do the
same for 'merge-tree'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unbreak CI jobs so that we do not attempt to use Python 2 that has
been removed from the platform.
* ps/ci-python-2-deprecation:
ci: fix Python dependency on Ubuntu 24.04
"git tag" learned the "--trailer" option to futz with the trailers
in the same way as "git commit" does.
* jp/tag-trailer:
builtin/tag: add --trailer option
builtin/commit: refactor --trailer logic
builtin/commit: use ARGV macro to collect trailers
The "test-tool" has been taught to run testsuite tests in parallel,
bypassing the need to use the "prove" tool.
* js/unit-test-suite-runner:
cmake: let `test-tool` run the unit tests, too
ci: use test-tool as unit test runner on Windows
t/Makefile: run unit tests alongside shell tests
unit tests: add rule for running with test-tool
test-tool run-command testsuite: support unit tests
test-tool run-command testsuite: remove hardcoded filter
test-tool run-command testsuite: get shell from env
t0080: turn t-basic unit test into a helper
The preceding commit has rewritten all callers of ref-related functions
to use the equivalents that accept a `struct ref_store`. Consequently,
the respective variants without the ref store are now unused. Remove
them.
There are likely patch series in-flight that use the now-removed
functions. To help the authors, the old implementations have been added
to "refs.c" in an ifdef'd section as a reference for how to migrate each
of the respective callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the functions in "refs.h" have two flavors: one that accepts a
`struct ref_store`, and one that figures it out via `the_repository`.
As part of the libification efforts we want to get rid of the latter
variant and stop relying on `the_repository` altogether.
Introduce a set of Coccinelle rules that transform callers of the "refs"
interfaces to pass a `struct ref_store`. These rules are not yet applied
by this patch so that it can be reviewed standalone more easily. This
will be done in the next patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `for_each_fullref_in()` function is supposedly the ref-store-less
equivalent of `refs_for_each_fullref_in()`, but the latter has gained a
new parameter `exclude_patterns` over time. Bring these two functions
back in sync again by adding the parameter to the former function, as
well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While most of the functions in "refs.h" have a variant that accepts a
`struct ref_store`, some don't. Callers of these functions are thus
forced to implicitly rely on `the_repository` to figure out the ref
store that is to be used.
Introduce those missing functions to address this shortcoming.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-tag supports interpreting trailers from an annotated tag message,
using --list --format="%(trailers)". However, the available methods to
add a trailer to a tag message (namely -F or --editor) are not as
ergonomic.
In a previous patch, we moved git-commit's implementation of its
--trailer option to the trailer.h API. Let's use that new function to
teach git-tag the same --trailer option, emulating as much of
git-commit's behavior as much as possible.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: John Passaro <john.a.passaro@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit adds user trailers to the commit message by passing its
`--trailer` arguments to a child process running `git-interpret-trailers
--in-place`. This logic is broadly useful, not just for git-commit but
for other commands constructing message bodies (e.g. git-tag).
Let's move this logic from git-commit to a new function in the trailer
API, so that it can be re-used in other commands.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Passaro <john.a.passaro@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace git-commit's callback for --trailer with the standard
OPT_PASSTHRU_ARGV macro. The callback only adds its values to a strvec
and sanity-checks that `unset` is always false; both of these are
already implemented in the parse-option API.
Signed-off-by: John Passaro <john.a.passaro@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the startup of Git, we call `initialize_the_repository()` to set
up `the_repository` as well as `the_index`. Part of this setup is also
to set the default object hash of the repository to SHA1. This has the
effect that `the_hash_algo` is getting initialized to SHA1, as well.
This default hash algorithm eventually gets overridden by most Git
commands via `setup_git_directory()`, which also detects the actual hash
algorithm used by the repository.
There are some commands though that don't access a repository at all, or
at a later point only, and thus retain the default hash function for
some amount of time. As some of the the preceding commits demonstrate,
this can lead to subtle issues when we access `the_hash_algo` when no
repository has been set up.
Address this issue by dropping the set up of the default hash algorithm
completely. The effect of this is that `the_hash_algo` will map to a
`NULL` pointer and thus cause Git to crash when something tries to
access the hash algorithm without it being properly initialized. It thus
forces all Git commands to explicitly set up the hash algorithm in case
there is no repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our fuzzing setups don't work in a proper repository, but only use the
in-memory configured `the_repository`. Consequently, we never go through
the full repository setup procedures and thus do not set up the hash
algo used by the repository.
The commit-graph fuzzer does rely on a properly initialized hash algo
though. Initialize it explicitly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to run git-shortlog(1) outside of a repository by passing
it output from git-log(1) via standard input. Obviously, as there is no
repository in that context, it is thus unsupported to pass any revisions
as arguments.
Regardless of that we still end up calling `setup_revisions()`. While
that works alright, it is somewhat strange. Furthermore, this is about
to cause problems when we unset the default object hash.
Refactor the code to only call `setup_revisions()` when we have a
repository. This is safe to do as we already verify that there are no
arguments when running outside of a repository anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-diff(1) command can be used outside repositories to diff two
files with each other. But even if there is no repository we will end up
hashing the files that we are diffing so that we can print the "index"
line:
```
diff --git a/a b/b
index 7898192..6178079 100644
--- a/a
+++ b/b
@@ -1 +1 @@
-a
+b
```
We implicitly use SHA1 to calculate the hash here, which is because
`the_repository` gets initialized with SHA1 during the startup routine.
We are about to stop doing this though such that `the_repository` only
ever has a hash function when it was properly initialized via a repo's
configuration.
To give full control to our users, we would ideally add a new switch to
git-diff(1) that allows them to specify the hash function when executed
outside of a repository. But for now, we only convert the code to make
this explicit such that we can stop setting the default hash algorithm
for `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verifying a bundle requires us to have a repository. This is encoded in
`verify_bundle()`, which will return an error if there is no repository.
We call `open_bundle()` before we call `verify_bundle()` though, which
already performs some verifications even though we may ultimately abort
due to a missing repository.
This is problematic because `open_bundle()` already reads the bundle
header and verifies that it contains a properly formatted hash. When
there is no repository we have no clue what hash function to expect
though, so we always end up assuming SHA1 here, which may or may not be
correct. Furthermore, we are about to stop initializing `the_hash_algo`
when there is no repository, which will lead to segfaults.
Check early on whether we have a repository to fix this issue.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We access `the_hash_algo` in git-blame(1) before we have executed
`parse_options_start()`, which may not be properly set up in case we
have no repository. This is fine for most of the part because all the
call paths that lead to it (git-blame(1), git-annotate(1) as well as
git-pick-axe(1)) specify `RUN_SETUP` and thus require a repository.
There is one exception though, namely when passing `-h` to print the
help. Here we will access `the_hash_algo` even if there is no repo.
This works fine right now because `the_hash_algo` gets sets up to point
to the SHA1 algorithm via `initialize_repository()`. But we're about to
stop doing this, and thus the code would lead to a `NULL` pointer
exception.
Prepare the code for this and only access `the_hash_algo` after we are
sure that there is a proper repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--short=` option for git-rev-parse(1) allows the user to specify
to how many characters object IDs should be shortened to. The option is
broken though for SHA256 repositories because we set the maximum allowed
hash size to `the_hash_algo->hexsz` before we have even set up the repo.
Consequently, `the_hash_algo` will always be SHA1 and thus we truncate
every hash after at most 40 characters.
Fix this by accessing `the_hash_algo` only after we have set up the
repo.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dumb HTTP transport tries to read the remote HEAD reference by
downloading the "HEAD" file and then parsing it via `http_fetch_ref()`.
This function will either parse the file as an object ID in case it is
exactly `the_hash_algo->hexsz` long, or otherwise it will check whether
the reference starts with "ref :" and parse it as a symbolic ref.
This is broken when parsing detached HEADs of a remote SHA256 repository
because we never update `the_hash_algo` to the discovered remote object
hash. Consequently, `the_hash_algo` will always be the fallback SHA1
hash algorithm, which will cause us to fail parsing HEAD altogteher when
it contains a SHA256 object ID.
Fix this issue by setting up `the_hash_algo` via `repo_set_hash_algo()`.
While at it, let's make the expected SHA1 fallback explicit in our code,
which also addresses an upcoming issue where we are going to remove the
SHA1 fallback for `the_hash_algo`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If either the `--attr-source` option or the `GIT_ATTR_SOURCE` envvar are
set, then `compute_default_attr_source()` will try to look up the value
as a treeish. It is possible to hit that function while outside of a Git
repository though, for example when using `git grep --no-index`. In that
case, Git will hit a bug because we try to look up the main ref store
outside of a repository.
Handle the case gracefully and detect when we try to look up an attr
source without a repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `default_attr_source()` function lazily computes the attr source
supposedly once, only. This is done via a static variable `attr_source`
that contains the resolved object ID of the attr source's tree. If the
variable is the null object ID then we try to look up the attr source,
otherwise we skip over it.
This approach is flawed though: the variable will never be set to
anything else but the null object ID in case there is no attr source.
Consequently, we re-compute the information on every call. And in the
worst case, when we silently ignore bad trees, this will cause us to try
and look up the treeish every single time.
Improve this by introducing a separate variable `has_attr_source` to
track whether we already computed the attr source and, if so, whether we
have an attr source or not.
This also allows us to convert the `ignore_bad_attr_tree` to not be
static anymore as the code will only be executed once anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `OPT__ABBREV()` option can be used to add an option that abbreviates
object IDs. When given a length longer than `the_hash_algo->hexsz`, then
it will instead set the length to that maximum length.
It may not always be guaranteed that we have `the_hash_algo` initialized
properly as the hash algorithm can only be set up after we have set up
`the_repository`. In that case, the hash would always be truncated to
the hex length of SHA1, which may not be what the user desires.
In practice it's not a problem as all commands that use `OPT__ABBREV()`
also have `RUN_SETUP` set and thus cannot work without a repository.
Consequently, both `the_repository` and `the_hash_algo` would be
properly set up.
Regardless of that, harden the code to not truncate the length when we
didn't set up a repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While `validate_headref()` is only called from `is_git_directory()` in
"setup.c", it is currently implemented in "path.c". Move it over such
that it becomes clear that it is only really used during setup in order
to discover repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>