There are no callers left, and we don't want anybody to add new ones (they
should use the not-unsafe version instead). So let's drop the function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The midx reader assumes chunks are aligned to a 4-byte boundary: we
treat the fanout chunk as an array of uint32_t, indexing it to feed the
results to ntohl(). Without aligning the chunks, we may violate the
CPU's alignment constraints. Though many platforms allow this, some do
not. And certanily UBSan will complain, since it is undefined behavior.
Even though most chunks are naturally 4-byte-aligned (because they are
storing uint32_t or larger types), PNAM is not. It stores NUL-terminated
pack names, so you can have a valid chunk with any length. The writing
side handles this by 4-byte-aligning the chunk, introducing a few extra
NULs as necessary. But since we don't check this on the reading side, we
may end up with a misaligned fanout and trigger the undefined behavior.
We have two options here:
1. Swap out ntohl(fanout[i]) for get_be32(fanout+i) everywhere. The
latter handles alignment itself. It's possible that it's slightly
slower (though in practice I'm not sure how true that is,
especially for these code paths which then go on to do a binary
search).
2. Enforce the alignment when reading the chunks. This is easy to do,
since the table-of-contents reader can check it in one spot.
I went with the second option here, just because it places less burden
on maintenance going forward (it is OK to continue using ntohl), and we
know it can't have any performance impact on the actual reads.
The commit-graph code uses the same chunk API. It's usually also 4-byte
aligned, but some chunks are not (like Bloom filter BDAT chunks). So
we'll pass "1" here to allow any alignment. It doesn't suffer from the
same problem as midx with its fanout because the fanout chunk is always
the first (and the rest of the format dictates that the first chunk will
start aligned).
The new test shows the effect on a midx with a misaligned PNAM chunk.
Note that the midx-reading code treats chunk-toc errors as soft, falling
back to the non-midx path rather than calling die(), as we do for other
parsing errors. Arguably we should make all of these behave the same,
but that's out of scope for this patch. For now the test just expects
the fallback behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pair_chunk() function is provided as an easy helper for parsing
chunks that just want a pointer to a set of bytes. But every caller has
a hidden bug: because we return only the pointer without the matching
chunk size, the callers have no clue how many bytes they are allowed to
look at. And as a result, they may read off the end of the mmap'd data
when the on-disk file does not match their expectations.
Since chunk files are typically used for local-repository data like
commit-graph files and midx's, the security implications here are pretty
mild. The worst that can happen is that you hand somebody a corrupted
repository tarball, and running Git on it does an out-of-bounds read and
crashes. So it's worth being more defensive, but we don't need to drop
everything and fix every caller immediately.
I noticed the problem because the pair_chunk_fn() callback does not look
at its chunk_size argument, and wanted to annotate it to silence
-Wunused-parameter. We could do that now, but we'd lose the hint that
this code should be audited and fixed.
So instead, let's set ourselves up for going down that path:
1. Provide a pair_chunk() function that does return the size, which
prepares us for fixing these cases.
2. Rename the existing function to pair_chunk_unsafe(). That gives us
an easy way to grep for cases which still need to be fixed, and the
name should cause anybody adding new calls to think twice before
using it.
There are no callers of the "safe" version yet, but we'll add some in
subsequent patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hash.h depends upon and includes repository.h, due to the definition and
use of the_hash_algo (defined as the_repository->hash_algo). However,
most headers trying to include hash.h are only interested in the layout
of the structs like object_id. Move the parts of hash.h that do not
depend upon repository.h into a new file hash-ll.h (the "low level"
parts of hash.h), and adjust other files to use this new header where
the convenience inline functions aren't needed.
This allows hash.h and object.h to be fairly small, minimal headers. It
also exposes a lot of hidden dependencies on both path.h (which was
brought in by repository.h) and repository.h (which was previously
implicitly brought in by object.h), so also adjust other files to be
more explicit about what they depend upon.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the change in the last commit to move several functions to
write-or-die.h, csum-file.h no longer needs to include cache.h.
However, removing that include forces several other C files, which
directly or indirectly dependend upon csum-file.h's inclusion of
cache.h, to now be more explicit about their dependencies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three definitions of an identical function which converts
`the_hash_algo` into either 1 (for SHA-1) or 2 (for SHA-256). There is a
copy of this function for writing both the commit-graph and
multi-pack-index file, and another inline definition used to write the
.rev header.
Consolidate these into a single definition in chunk-format.h. It's not
clear that this is the best header to define this function in, but it
should do for now.
(Worth noting, the .rev caller expects a 4-byte unsigned, but the other
two callers work with a single unsigned byte. The consolidated version
uses the latter type, and lets the compiler widen it when required).
Another caller will be added in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hashfile API uses a hard-coded buffer size of 8KB and has ever since
it was introduced in c38138c (git-pack-objects: write the pack files
with a SHA1 csum, 2005-06-26). It performs a similar function to the
hashing buffers in read-cache.c, but that code was updated from 8KB to
128KB in f279894 (read-cache: make the index write buffer size 128K,
2021-02-18). The justification there was that do_write_index() improves
from 1.02s to 0.72s. Since our end goal is to have the index writing
code use the hashfile API, we need to unify this buffer size to avoid a
performance regression.
There is a buffer, 'check_buffer', that is used to verify the check_fd
file descriptor. When this buffer increases to 128K to fit the data
being flushed, it causes the stack to overflow the limits placed in the
test suite. To avoid issues with stack size, move both 'buffer' and
'check_buffer' to be heap pointers within 'struct hashfile'. The
'check_buffer' member is left as NULL unless check_fd is set in
hashfd_check(). Both buffers are cleared as part of finalize_hashfile()
which also frees the full structure.
Since these buffers are now on the heap, we can adjust their size based
on the needs of the consumer. In particular, callers to
hashfd_throughput() are expecting to report progress indicators as the
buffer flushes. These callers would prefer the smaller 8k buffer to
avoid large delays between updates, especially for users with slower
networks. When the progress indicator is not used, the larger buffer is
preferrable.
By adding a new trace2 region in the chunk-format API, we can see that
the writing portion of 'git multi-pack-index write' lowers from ~1.49s
to ~1.47s on a Linux machine. These effects may be more pronounced or
diminished on other filesystems. The end-to-end timing is too noisy to
have a definitive change either way.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before refactoring into the chunk-format API, the commit-graph parsing
logic included checks for duplicate chunks. It is unlikely that we would
desire a chunk-based file format that allows duplicate chunk IDs in the
table of contents, so add duplicate checks into
read_table_of_contents().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the capability to read the table of contents, then pair the chunks
with necessary logic using read_chunk_fn pointers. Callers will be added
in future changes, but the typical outline will be:
1. initialize a 'struct chunkfile' with init_chunkfile(NULL).
2. call read_table_of_contents().
3. for each chunk to parse,
a. call pair_chunk() to assign a pointer with the chunk position, or
b. call read_chunk() to run a callback on the chunk start and size.
4. call free_chunkfile() to clear the 'struct chunkfile' data.
We are re-using the anonymous 'struct chunkfile' data, as it is internal
to the chunk-format API. This gives it essentially two modes: write and
read. If the same struct instance was used for both reads and writes,
then there would be failures.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of combining the logic from the commit-graph and
multi-pack-index file formats, create a new chunk-format API. Use a
'struct chunkfile' pointer to keep track of data that has been
registered for writes. This struct is anonymous outside of
chunk-format.c to ensure no user attempts to interfere with the data.
The next change will use this API in commit-graph.c, but the general
approach is:
1. initialize the chunkfile with init_chunkfile(f).
2. add chunks in the intended writing order with add_chunk().
3. write any header information to the hashfile f.
4. write the chunkfile data using write_chunkfile().
5. free the chunkfile struct using free_chunkfile().
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King
Calvin Wan
Elijah Newren
Taylor Blau
Derrick Stolee