The git-for-each-ref(1) command doesn't provide a way to print root refs
i.e pseudorefs and HEAD with the regular "refs/" prefixed refs.
This commit adds a new option "--include-root-refs" to
git-for-each-ref(1). When used this would also print pseudorefs and HEAD
for the current worktree.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flag 'FILTER_REFS_ALL' is a bit ambiguous, where ALL doesn't specify
if it means to contain refs from all worktrees or whether all types of
refs (regular, HEAD & pseudorefs) or all of the above.
Since here it is actually referring to all refs with the "refs/" prefix,
let's rename it to 'FILTER_REFS_REGULAR' to indicate that this is
specifically for regular refs.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may easily run into serious crashes: For example, if we run
`init_tree_desc()` directly after a failed `parse_tree()`, we are
accessing uninitialized data or trying to dereference `NULL`.
Note that the `parse_tree()` function already takes care of showing an
error message. The `parse_tree_indirectly()` and
`repo_get_commit_tree()` functions do not, therefore those latter call
sites need to show a useful error message while the former do not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the git-reflog(1) command has subcommands to show reflog entries
or check for reflog existence, it does not have any subcommands that
would allow the user to enumerate all existing reflogs. This makes it
quite hard to discover which reflogs a repository has. While this can
be worked around with the "files" backend by enumerating files in the
".git/logs" directory, users of the "reftable" backend don't enjoy such
a luxury.
Introduce a new subcommand `git reflog list` that lists all reflogs the
repository knows of to fill this gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref and reflog iterators share much of the same underlying code to
iterate over the corresponding entries. This results in some weird code
because the reflog iterator also exposes an object ID as well as a flag
to the callback function. Neither of these fields do refer to the reflog
though -- they refer to the corresponding ref with the same name. This
is quite misleading. In practice at least the object ID cannot really be
implemented in any other way as a reflog does not have a specific object
ID in the first place. This is further stressed by the fact that none of
the callbacks except for our test helper make use of these fields.
Split up the infrastucture so that ref and reflog iterators use separate
callback signatures. This allows us to drop the nonsensical fields from
the reflog iterator.
Note that internally, the backends still use the same shared infra to
iterate over both types. As the backends should never end up being
called directly anyway, this is not much of a problem and thus kept
as-is for simplicity's sake.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you run `git rebase --continue` when no rebase is in progress, git
outputs `fatal: No rebase in progress?` which is not a question but a
statement. Make it appear as a statement, and use lowercase to align
with error message style.
Signed-off-by: Harmen Stoppels <me@harmenstoppels.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths that call repo_read_object_file() have been
tightened to react to errors.
* js/check-null-from-read-object-file:
Always check the return value of `repo_read_object_file()`
Code simplification.
* rs/receive-pack-remove-find-header:
receive-pack: use find_commit_header() in check_nonce()
receive-pack: use find_commit_header() in check_cert_push_options()
If the user asks for the list of tags to be displayed in columns
("--columns"), a child git-column process is used to format the output
as expected.
In a rare situation where we encounter a problem spawning that child
process, we will work erroneously.
Make noticeable we're having a problem executing git-column, so the user
can act accordingly.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9830926c7d (rev-list: add commit object support in `--missing`
option, 2023-10-27) we fixed the `--missing` option in `git rev-list`
so that it works with with missing commits, not just blobs/trees.
Unfortunately, such a command would still fail with a "fatal: bad
object <oid>" if it is passed a missing commit, blob or tree as an
argument (before the rev walking even begins).
When such a command is used to find the dependencies of some objects,
for example the dependencies of quarantined objects (see the
"QUARANTINE ENVIRONMENT" section in the git-receive-pack(1)
documentation), it would be better if the command would instead
consider such missing objects, especially commits, in the same way as
other missing objects.
If, for example `--missing=print` is used, it would be nice for some
use cases if the missing tips passed as arguments were reported in
the same way as other missing objects instead of the command just
failing.
We could introduce a new option to make it work like this, but most
users are likely to prefer the command to have this behavior as the
default one. Introducing a new option would require another dumb loop
to look for that option early, which isn't nice.
Also we made `git rev-list` work with missing commits very recently
and the command is most often passed commits as arguments. So let's
consider this as a bug fix related to these recent changes.
While at it let's add a NEEDSWORK comment to say that we should get
rid of the existing ugly dumb loops that parse the
`--exclude-promisor-objects` and `--missing=...` options early.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" sometimes was silent even when it failed due to
unwritable index file, which has been corrected.
* ps/report-failure-from-git-stash:
builtin/stash: report failure to write to index
A failed "git tag -s" did not necessarily result in an error
depending on the crypto backend, which has been corrected.
* jc/sign-buffer-failure-propagation-fix:
ssh signing: signal an error with a negative return value
tag: fix sign_buffer() call to create a signed tag
Update to a new feature recently added, "git show-ref --exists".
* tc/show-ref-exists-fix:
builtin/show-ref: treat directory as non-existing in --exists
Currently, (restore, checkout, reset) commands correctly take '@' as a
synonym for 'HEAD'. However, in patch mode different prompts/messages
are given on command line due to patch mode machinery not considering
'@' to be a synonym for 'HEAD' due to literal string comparison with
the word 'HEAD', and therefore assigning patch_mode_($command)_nothead
and triggering reverse mode (-R in diff-index). The NEEDSWORK comment
suggested comparing commit objects to get around this. However, doing
so would also take a non-checked out branch pointing to the same commit
as HEAD, as HEAD. This would cause confusion to the user.
Therefore, after parsing '@', replace it with 'HEAD' as reasonably
early as possible. This also solves another problem of disparity
between 'git checkout HEAD' and 'git checkout @' (latter detaches at
the HEAD commit and the former does not).
Trade-offs:
- Some of the errors would show the revision argument as 'HEAD' when
given '@'. This should be fine, as most users who probably use '@'
would be aware that it is a shortcut for 'HEAD' and most probably
used to use 'HEAD'. There is also relevant documentation in
'gitrevisions' manpage about '@' being the shortcut for 'HEAD'. Also,
the simplicity of the solution far outweighs this cost.
- Consider '@' as a shortcut for 'HEAD' even if 'refs/heads/@' exists
at a different commit. Naming a branch '@' is an obvious foot-gun and
many existing commands already take '@' for 'HEAD' even if
'refs/heads/@' exists at a different commit or does not exist at all
(e.g. 'git log @', 'git push origin @' etc.). Therefore this is an
existing assumption and should not be a problem.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A negative padding does not make sense and can cause errors in the
memory allocator since it’s interpreted as an unsigned integer.
Reported-by: Tiago Pascoal <tiago@pascoal.net>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-ref --verify" did not show things like "CHERRY_PICK_HEAD",
which has been corrected.
* pw/show-ref-pseudorefs:
t1400: use show-ref to check pseudorefs
show-ref --verify: accept pseudorefs
"git stash" sometimes was silent even when it failed due to
unwritable index file, which has been corrected.
* ps/report-failure-from-git-stash:
builtin/stash: report failure to write to index
A failed "git tag -s" did not necessarily result in an error
depending on the crypto backend, which has been corrected.
* jc/sign-buffer-failure-propagation-fix:
ssh signing: signal an error with a negative return value
tag: fix sign_buffer() call to create a signed tag
Add and apply a semantic patch for calling xstrncmpz() to compare a
NUL-terminated string with a buffer of a known length instead of using
strncmp() and checking the terminating NUL explicitly. This simplifies
callers by reducing code duplication.
I had to adjust remote.c manually because Coccinelle inexplicably
changed the indent of the else branches.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the public function find_commit_header() and remove find_header(),
as it becomes unused. This is safe and appropriate because we pass the
NUL-terminated payload buffer to check_nonce() instead of its start and
length. The underlying strbuf push_cert cannot contain NULs, as it is
built using strbuf_addstr(), only.
We no longer need to call strlen(), as find_commit_header() returns the
length of nonce already.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the public function find_commit_header() instead of find_header() to
simplify the code. This is possible and safe because we're operating on
a strbuf, which is always NUL-terminated, so there is no risk of running
over the end of the buffer. It cannot contain NUL within the buffer, as
it is built using strbuf_addstr(), only.
The string comparison becomes more complicated because we need to check
for NUL explicitly after comparing the length-limited option, but on the
flip side we don't need to clean up allocations or track the remaining
buffer length.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
Doc updates to clarify what an "unborn branch" means.
* jc/orphan-unborn:
orphan/unborn: fix use of 'orphan' in end-user facing messages
orphan/unborn: add to the glossary and use them consistently
Code clean-up.
* la/trailer-cleanups:
trailer: use offsets for trailer_start/trailer_end
trailer: find the end of the log message
commit: ignore_non_trailer computes number of bytes to ignore
Code clean-up around use of configuration variables.
* jk/config-cleanup:
sequencer: simplify away extra git_config_string() call
gpg-interface: drop pointless config_error_nonbool() checks
push: drop confusing configset/callback redundancy
config: use git_config_string() for core.checkRoundTripEncoding
diff: give more detailed messages for bogus diff.* config
config: use config_error_nonbool() instead of custom messages
imap-send: don't use git_die_config() inside callback
git_xmerge_config(): prefer error() to die()
config: reject bogus values for core.checkstat
Clean-up code that handles combinations of incompatible options.
* rs/incompatible-options-messages:
worktree: simplify incompatibility message for --orphan and commit-ish
worktree: standardize incompatibility messages
clean: factorize incompatibility message
revision, rev-parse: factorize incompatibility messages about - -exclude-hidden
revision: use die_for_incompatible_opt3() for - -graph/--reverse/--walk-reflogs
repack: use die_for_incompatible_opt3() for -A/-k/--cruft
push: use die_for_incompatible_opt4() for - -delete/--tags/--all/--mirror
Clean-up code that handles combinations of incompatible options.
* rs/i18n-cannot-be-used-together:
i18n: factorize even more 'incompatible options' messages
"git sparse-checkout set" added default patterns even when the
patterns are being fed from the standard input, which has been
corrected.
* jc/sparse-checkout-set-default-fix:
sparse-checkout: use default patterns for 'set' only !stdin
"git fetch --atomic" issued an unnecessary empty error message,
which has been corrected.
cf. <ZX__e7VjyLXIl-uV@tanuki>
* jx/fetch-atomic-error-message-fix:
fetch: no redundant error message for atomic fetch
t5574: test porcelain output of atomic fetch
Code clean-up for sanity checking of command line options for "git
show-ref".
* rs/show-ref-incompatible-options:
show-ref: use die_for_incompatible_opt3()
Some codepaths did not correctly parse configuration variables
specified with valueless "true", which has been corrected.
* jk/implicit-true:
fsck: handle NULL value when parsing message config
trailer: handle NULL value when parsing trailer-specific config
submodule: handle NULL value when parsing submodule.*.branch
help: handle NULL value for alias.* config
trace2: handle NULL values in tr2_sysenv config callback
setup: handle NULL value when parsing extensions
config: handle NULL value when parsing non-bools
"git bisect reset" has been taught to clean up state files and refs
even when BISECT_START file is gone.
* jk/bisect-reset-fix:
bisect: always clean on reset
The "--fsck-objects" option of "git index-pack" now can take the
optional parameter to tweak severity of different fsck errors.
* jc/index-pack-fsck-levels:
index-pack: --fsck-objects to take an optional argument for fsck msgs
index-pack: test and document --strict=<msg-id>=<severity>...
The command "git tag -s" internally calls sign_buffer() to make a
cryptographic signature using the chosen backend like GPG and SSH.
The internal helper functions used by "git tag" implementation seem
to use a "negative return values are errors, zero or positive return
values are not" convention, and there are places (e.g., verify_tag()
that calls gpg_verify_tag()) that these internal helper functions
translate return values that signal errors to conform to this
convention, but do_sign() that calls sign_buffer() forgets to do so.
Fix it, so that a failed call to sign_buffer() that can return the
exit status from pipe_command() will not be overlooked.
Reported-by: Sergey Kosukhin <skosukhin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-ref --verify" is useful for scripts that want to look up a
fully qualified refname without falling back to the DWIM rules used by
"git rev-parse" rules when the ref does not exist. Currently it will
only accept "HEAD" or a refname beginning with "refs/". Running
git show-ref --verify CHERRY_PICK_HEAD
will always result in
fatal: 'CHERRY_PICK_HEAD' - not a valid ref
even when CHERRY_PICK_HEAD exists. By calling refname_is_safe() instead
of comparing the refname to "HEAD" we can accept all one-level refs that
contain only uppercase ascii letters and underscores.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-stash(1) command needs to write to the index for many of its
operations. When the index is locked by a concurrent writer it will thus
fail to operate, which is expected. What is not expected though is that
we do not print any error message at all in this case. The user can thus
easily miss the fact that the command didn't do what they expected it to
do and would be left wondering why that is.
Fix this bug and report failures to write to the index. Add tests for
the subcommands which hit the respective code paths.
While at it, unify error messages when writing to the index fails. The
chosen error message is already used in "builtin/stash.c".
Reported-by: moti sd <motisd8@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of places in Git's source code where the return value
is not checked. As a consequence, they are susceptible to segmentation
faults.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that multi-pack reuse is supported, enable it via the
feature.experimental configuration in addition to the classic
`pack.allowPackReuse`.
This will allow more users to experiment with the new behavior who might
not otherwise be aware of the existing `pack.allowPackReuse`
configuration option.
The enum with values NO_PACK_REUSE, SINGLE_PACK_REUSE, and
MULTI_PACK_REUSE is defined statically in builtin/pack-objects.c's
compilation unit. We could hoist that enum into a scope visible from the
repository_settings struct, and then use that enum value in
pack-objects. Instead, define a single int that indicates what
pack-objects's default value should be to avoid additional unnecessary
code movement.
Though `feature.experimental` implies `pack.allowPackReuse=multi`, this
can still be overridden by explicitly setting the latter configuration
to either "single" or "false". Tests covering all of these cases are
showin t5332.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-index-pack has a --strict option that can take an optional argument
to provide a list of fsck issues to change their severity.
--fsck-objects does not have such a utility, which would be useful if
one would like to be more lenient or strict on data integrity in a
repository.
Like --strict, allow --fsck-objects to also take a list of fsck msgs to
change the severity.
Remove the "For internal use only" note for --fsck-objects, and document
the option. This won't often be used by the normal end user, but it
turns out it is useful for Git forges like GitLab.
Reviewed-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5d477a334a (fsck (receive-pack): allow demoting errors to warnings,
2015-06-22) allowed a list of fsck msg to downgrade to be passed to
--strict. However this is a hidden argument that was not documented nor
tested. Though it is true that most users would not call this option
directly, (nor use index-pack for that matter) it is still useful to
document and test this feature.
Reviewed-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define "special ref" as a very narrow set that consists of
FETCH_HEAD and MERGE_HEAD, and clarify everything else that used to
be classified as such are actually just pseudorefs.
* ps/not-so-many-refs-are-special:
Documentation: add "special refs" to the glossary
refs: redefine special refs
refs: convert MERGE_AUTOSTASH to become a normal pseudo-ref
sequencer: introduce functions to handle autostashes via refs
refs: convert AUTO_MERGE to become a normal pseudo-ref
sequencer: delete REBASE_HEAD in correct repo when picking commits
sequencer: clean up pseudo refs with REF_NO_DEREF
Update to a new feature recently added, "git show-ref --exists".
* tc/show-ref-exists-fix:
builtin/show-ref: treat directory as non-existing in --exists
c15129b699 (config: factor out global config file retrieval, 2024-01-18)
was a refactor that moved some of the code in this function to
`config.c`. However, in the process I managed to drop this code comment
which explains `$HOME not set`.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When specifying a merge base explicitly, there is actually no good
reason why the inputs need to be commits: that's only needed if the
merge base has to be deduced from the commit graph.
This commit is best viewed with `--color-moved
--color-moved-ws=allow-indentation-change`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $HOME/.gitignore is missing but XDG config file available, we
should write into the latter, not former. "git gc" and "git
maintenance" wrote into a wrong "global config" file, which have
been corrected.
* kh/maintenance-use-xdg-when-it-should:
maintenance: use XDG config if it exists
config: factor out global config file retrieval
config: rename global config function
config: format newlines
Instead of manually creating refs/ hierarchy on disk upon a
creation of a secondary worktree, which is only usable via the
files backend, use the refs API to populate it.
* ps/worktree-refdb-initialization:
builtin/worktree: create refdb via ref backend
worktree: expose interface to look up worktree by name
builtin/worktree: move setup of commondir file earlier
refs/files: skip creation of "refs/{heads,tags}" for worktrees
setup: move creation of "refs/" into the files backend
refs: prepare `refs_init_db()` for initializing worktree refs
The error message given when "git branch -d branch" fails due to
commits unique to the branch has been split into an error and a new
conditional advice message.
* rj/advice-delete-branch-not-fully-merged:
branch: make the advice to force-deleting a conditional one
advice: fix an unexpected leading space
advice: sort the advice related lists
Comment updates to help developers not to attempt to modify
messages from plumbing commands that must stay constant.
It might make sense to reassess the plumbing needs every few years,
but that should be done as a separate effort.
* es/some-up-to-date-messages-must-stay:
messages: mark some strings with "up-to-date" not to touch
"git fetch" learned to pay attention to "fetch.all" configuration
variable, which pretends as if "--all" was passed from the command
line when no remote parameter was given.
* tb/fetch-all-configuration:
fetch: add new config option fetch.all
Similar to the preceding conversion of the AUTO_MERGE pseudo-ref, let's
convert the MERGE_AUTOSTASH ref to become a normal pseudo-ref as well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 70c70de616 (refs: complete list of special refs, 2023-12-14) we have
inrtoduced a new `is_special_ref()` function that classifies some refs
as being special. The rule is that special refs are exclusively read and
written via the filesystem directly, whereas normal refs exclucsively go
via the refs API.
The intent of that commit was to record the status quo so that we know
to route reads of such special refs consistently. Eventually, the list
should be reduced to its bare minimum of refs which really are special,
namely FETCH_HEAD and MERGE_HEAD.
Follow up on this promise and convert the AUTO_MERGE ref to become a
normal pseudo-ref by using the refs API to both read and write it
instead of accessing the filesystem directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git maintenance register` registers the repository in the user's global
config. `$XDG_CONFIG_HOME/git/config` is supposed to be used if
`~/.gitconfig` does not exist. However, this command creates a
`~/.gitconfig` file and writes to that one even though the XDG variant
exists.
This used to work correctly until 50a044f1e4 (gc: replace config
subprocesses with API calls, 2022-09-27), when the command started calling
the config API instead of git-config(1).
Also change `unregister` accordingly.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out code that retrieves the global config file so that we can use
it in `gc.c` as well.
Use the old name from the previous commit since this function acts
functionally the same as `git_system_config` but for “global”.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename this function to a more descriptive name since we want to use the
existing name for a new function.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unneeded newlines according to `clang-format`.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9080a7f178 (builtin/show-ref: add new mode to check for reference
existence, 2023-10-31) added the option --exists to git-show-ref(1).
When you use this option against a ref that doesn't exist, but it is
a parent directory of an existing ref, you get the following error:
$ git show-ref --exists refs/heads
error: failed to look up reference: Is a directory
when the ref-files backend is in use. To be more clear to user,
hide the error about having found a directory. What matters to the
user is that the named ref does not exist. Instead, print the same
error as when the ref was not found:
error: reference does not exist
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
Streaming spans of packfile data used to be done only from a
single, primary, pack in a repository with multiple packfiles. It
has been extended to allow reuse from other packfiles, too.
* tb/multi-pack-verbatim-reuse: (26 commits)
t/perf: add performance tests for multi-pack reuse
pack-bitmap: enable reuse from all bitmapped packs
pack-objects: allow setting `pack.allowPackReuse` to "single"
t/test-lib-functions.sh: implement `test_trace2_data` helper
pack-objects: add tracing for various packfile metrics
pack-bitmap: prepare to mark objects from multiple packs for reuse
pack-revindex: implement `midx_pair_to_pack_pos()`
pack-revindex: factor out `midx_key_to_pack_pos()` helper
midx: implement `midx_preferred_pack()`
git-compat-util.h: implement checked size_t to uint32_t conversion
pack-objects: include number of packs reused in output
pack-objects: prepare `write_reused_pack_verbatim()` for multi-pack reuse
pack-objects: prepare `write_reused_pack()` for multi-pack reuse
pack-objects: pass `bitmapped_pack`'s to pack-reuse functions
pack-objects: keep track of `pack_start` for each reuse pack
pack-objects: parameterize pack-reuse routines over a single pack
pack-bitmap: return multiple packs via `reuse_partial_packfile_from_bitmap()`
pack-bitmap: simplify `reuse_partial_packfile_from_bitmap()` signature
ewah: implement `bitmap_is_empty()`
pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions
...
The treewide clean-up of "up-to-date" strings done in 7560f547
(treewide: correct several "up-to-date" to "up to date", 2017-08-23)
deliberately left some out, but unlike the lines that were changed
by the commit, the lines that were deliberately left untouched by
the commit is impossible to ask "git blame" to link back to the
commit that did not touch them.
Let's do the second best thing, leave a short comment near them
explaining why those strings should not be modified or localized.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[es: make in-code comment more developer-friendly]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message we show when the user tries to delete a not fully
merged branch describes the error and gives a hint to the user:
error: the branch 'foo' is not fully merged.
If you are sure you want to delete it, run 'git branch -D foo'.
Let's move the hint part so that it is displayed using the advice
machinery:
error: the branch 'foo' is not fully merged
hint: If you are sure you want to delete it, run 'git branch -D foo'
hint: Disable this message with "git config advice.forceDeleteBranch false"
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git sparse-checkout (add|set) --[no-]cone --end-of-options" did
not handle "--end-of-options" correctly after a recent update.
* en/sparse-checkout-eoo:
sparse-checkout: be consistent with end of options markers
"git sparse-checkout set" added default patterns even when the
patterns are being fed from the standard input, which has been
corrected.
* jc/sparse-checkout-set-default-fix:
sparse-checkout: use default patterns for 'set' only !stdin
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
Introduce a boolean configuration option fetch.all which allows to
fetch all available remotes by default. The config option can be
overridden by explicitly specifying a remote or by using --no-all.
The behavior for --all is unchanged and calling git-fetch with --all
and a remote will still result in an error.
Additionally, describe the configuration variable in the config
documentation and implement new tests to cover the expected behavior.
Also add --no-all to the command-line documentation of git-fetch.
Signed-off-by: Tamino Bauknecht <dev@tb6.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a worktree we create the worktree's ref database manually
by first writing a "HEAD" file so that the directory is recognized as a
Git repository by other commands, and then running git-update-ref(1) or
git-symbolic-ref(1) to write the actual value. But while this is fine
for the files backend, this logic simply assumes too much about how the
ref backend works and will leave behind an invalid ref database once any
other ref backend lands.
Refactor the code to instead use `refs_init_db()` to initialize the ref
database so that git-worktree(1) itself does not need to know about how
to initialize it. This will allow future ref backends to customize how
the per-worktree ref database is set up. Furthermore, as we now already
have a worktree ref store around, we can also avoid spawning external
commands to write the HEAD reference and instead use the refs API to do
so.
Note that we do not have an equivalent to passing the `--quiet` flag to
git-symbolic-ref(1) as we did before. This flag does not have an effect
anyway though, as git-symbolic-ref(1) only honors it when reading a
symref, but never when writing one.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shuffle around how we create supporting worktree files so that we first
ensure that the worktree has all link files ("gitdir", "commondir")
before we try to initialize the ref database by writing "HEAD". This
will be required by a subsequent commit where we start to initialize the
ref database via `refs_init_db()`, which will require an initialized
`struct worktree *`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t5309 script triggers a racy false positive with SANITIZE=leak on a
multi-core system. Running with "--stress --run=6" usually fails within
10 seconds or so for me, complaining with something like:
+ git index-pack --fix-thin --stdin
fatal: REF_DELTA at offset 46 already resolved (duplicate base 01d7713666f4de822776c7622c10f1b07de280dc?)
=================================================================
==3904583==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fa790d01986 in __interceptor_realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98
#1 0x7fa790add769 in __pthread_getattr_np nptl/pthread_getattr_np.c:180
#2 0x7fa790d117c5 in __sanitizer::GetThreadStackTopAndBottom(bool, unsigned long*, unsigned long*) ../../../../src/libsanitizer/sanitizer_common/sanitizer_linux_libcdep.cpp:150
#3 0x7fa790d11957 in __sanitizer::GetThreadStackAndTls(bool, unsigned long*, unsigned long*, unsigned long*, unsigned long*) ../../../../src/libsanitizer/sanitizer_common/sanitizer_linux_libcdep.cpp:598
#4 0x7fa790d03fe8 in __lsan::ThreadStart(unsigned int, unsigned long long, __sanitizer::ThreadType) ../../../../src/libsanitizer/lsan/lsan_posix.cpp:51
#5 0x7fa790d013fd in __lsan_thread_start_func ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:440
#6 0x7fa790adc3eb in start_thread nptl/pthread_create.c:444
#7 0x7fa790b5ca5b in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
SUMMARY: LeakSanitizer: 32 byte(s) leaked in 1 allocation(s).
Aborted
What happens is this:
0. We construct a bogus pack with a duplicate object in it and trigger
index-pack.
1. We spawn a bunch of worker threads to resolve deltas (on my system
it is 16 threads).
2. One of the threads sees the duplicate object and bails by calling
exit(), taking down all of the threads. This is expected and is the
point of the test.
3. At the time exit() is called, we may still be spawning threads from
the main process via pthread_create(). LSan hooks thread creation
to update its book-keeping; it has to know where each thread's
stack is (so it can find entry points for reachable memory). So it
calls pthread_getattr_np() to get information about the new thread.
That may allocate memory that must be freed with a matching call to
pthread_attr_destroy(). Probably LSan does that immediately, but
if you're unlucky enough, the exit() will happen while it's between
those two calls, and the allocated pthread_attr_t appears as a
leak.
This isn't a real leak. It's not even in our code, but rather in the
LSan instrumentation code. So we could just ignore it. But the false
positive can cause people to waste time tracking it down.
It's possibly something that LSan could protect against (e.g., cover the
getattr/destroy pair with a mutex, and then in the final post-exit()
check for leaks try to take the same mutex). But I don't know enough
about LSan to say if that's a reasonable approach or not (or if my
analysis is even completely correct).
In the meantime, it's pretty easy to avoid the race by making creation
of the worker threads "atomic". That is, we'll spawn all of them before
letting any of them start to work. That's easy to do because we already
have a work_lock() mutex for handing out that work. If the main process
takes it, then all of the threads will immediately block until we've
finished spawning and released it.
This shouldn't make any practical difference for non-LSan runs. The
thread spawning is quick, and could happen before any worker thread gets
scheduled anyway.
Probably other spots that use threads are subject to the same issues.
But since we have to manually insert locking (and since this really is
kind of a hack), let's not bother with them unless somebody experiences
a similar racy false-positive in practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
Doc updates to clarify what an "unborn branch" means.
* jc/orphan-unborn:
orphan/unborn: fix use of 'orphan' in end-user facing messages
orphan/unborn: add to the glossary and use them consistently
Code clean-up.
* la/trailer-cleanups:
trailer: use offsets for trailer_start/trailer_end
trailer: find the end of the log message
commit: ignore_non_trailer computes number of bytes to ignore
Introduce a new `--ref-format` value flag for git-clone(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new `--ref-format` value flag for git-init(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new `--show-ref-format` to git-rev-parse(1) that causes it
to print the ref format used by a repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "extensions.refStorage" extension that allows us to
specify the ref storage format used by a repository. For now, the only
supported format is the "files" format, but this list will likely soon
be extended to also support the upcoming "reftable" format.
There have been discussions on the Git mailing list in the past around
how exactly this extension should look like. One alternative [1] that
was discussed was whether it would make sense to model the extension in
such a way that backends are arbitrarily stackable. This would allow for
a combined value of e.g. "loose,packed-refs" or "loose,reftable", which
indicates that new refs would be written via "loose" files backend and
compressed into "packed-refs" or "reftable" backends, respectively.
It is arguable though whether this flexibility and the complexity that
it brings with it is really required for now. It is not foreseeable that
there will be a proliferation of backends in the near-term future, and
the current set of existing formats and formats which are on the horizon
can easily be configured with the much simpler proposal where we have a
single value, only.
Furthermore, if we ever see that we indeed want to gain the ability to
arbitrarily stack the ref formats, then we can adapt the current
extension rather easily. Given that Git clients will refuse any unknown
value for the "extensions.refStorage" extension they would also know to
ignore a stacked "loose,packed-refs" in the future.
So let's stick with the easy proposal for the time being and wire up the
extension.
[1]: <pull.1408.git.1667846164.gitgitgadget@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to discern which ref storage format a repository is supposed to
use we need to start setting up and/or discovering the format. This
needs to happen in two separate code paths.
- The first path is when we create a repository via `init_db()`. When
we are re-initializing a preexisting repository we need to retain
the previously used ref storage format -- if the user asked for a
different format then this indicates an error and we error out.
Otherwise we either initialize the repository with the format asked
for by the user or the default format, which currently is the
"files" backend.
- The second path is when discovering repositories, where we need to
read the config of that repository. There is not yet any way to
configure something other than the "files" backend, so we can just
blindly set the ref storage format to this backend.
Wire up this logic so that we have the ref storage format always readily
available when needed. As there is only a single backend and because it
is not configurable we cannot yet verify that this tracking works as
expected via tests, but tests will be added in subsequent commits. To
countermand this ommission now though, raise a BUG() in case the ref
storage format is not set up properly in `ref_store_init()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" has been prepared to allow cloning a repository with
non-default hash function into a repository that uses the reftable
backend.
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
"git fetch --atomic" issued an unnecessary empty error message,
which has been corrected.
* jx/fetch-atomic-error-message-fix:
fetch: no redundant error message for atomic fetch
t5574: test porcelain output of atomic fetch
Code clean-up for sanity checking of command line options for "git
show-ref".
* rs/show-ref-incompatible-options:
show-ref: use die_for_incompatible_opt3()
"git checkout -B <branch> [<start-point>]" allowed a branch that is
in use in another worktree to be updated and checked out, which
might be a bit unexpected. The rule has been tightened, which is a
breaking change. "--ignore-other-worktrees" option is required to
unbreak you, if you are used to the current behaviour that "-B"
overrides the safety.
* jc/checkout-B-branch-in-use:
checkout: forbid "-B <branch>" from touching a branch used elsewhere
checkout: refactor die_if_checked_out() caller
"git sparse-checkout set ---no-cone" uses default patterns when none
is given from the command line, but it should do so ONLY when
--stdin is not being used. Right now, add_patterns_from_input()
called when reading from the standard input is sloppy and does not
check if there are extra command line parameters that the command
will silently ignore, but that will change soon and not setting this
unnecessary and unused default patterns start to matter when it gets
fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
93851746 (parse-options: decouple "--end-of-options" and "--",
2023-12-06) updated the world order to make callers of parse-options
that set PARSE_OPT_KEEP_UNKNOWN_OPT responsible for deciding what to
do with "--end-of-options" they may see after parse_options() returns.
This made a previous bug in sparse-checkout more visible; namely,
that
git sparse-checkout [add|set] --[no-]cone --end-of-options ...
would simply treat "--end-of-options" as one of the paths to include in
the sparse-checkout. But this was already problematic before; namely,
git sparse-checkout [add|set| --[no-]cone --sikp-checks ...
would not give an error on the mis-typed "--skip-checks" but instead
simply treat "--sikp-checks" as a path or pattern to include in the
sparse-checkout, which is highly unfriendly.
This behavior began when the command was converted to parse-options in
7bffca95ea (sparse-checkout: add '--stdin' option to set subcommand,
2019-11-21). Back then it was just called KEEP_UNKNOWN. Later it was
renamed to KEEP_UNKNOWN_OPT in 99d86d60e5 (parse-options:
PARSE_OPT_KEEP_UNKNOWN only applies to --options, 2022-08-19) to clarify
that it was only about dashed options; we always keep non-option
arguments. Looking at that original patch, both Peff and I think that
the author was simply confused about the mis-named option, and really
just wanted to keep the non-option arguments. We never should have used
the flag all along (and the other cases were cargo-culted within the
file).
Remove the erroneous PARSE_OPT_KEEP_UNKNOWN_OPT flag now to fix this
bug. Note that this does mean that anyone who might have been using
git sparse-checkout [add|set] [--[no-]cone] --foo --bar
to request paths or patterns '--foo' and '--bar' will now have to use
git sparse-checkout [add|set] [--[no-]cone] -- --foo --bar
That makes sparse-checkout more consistent with other git commands,
provides users much friendlier error messages and behavior, and is
consistent with the all-caps warning in git-sparse-checkout.txt that
this command "is experimental...its behavior...will likely change". :-)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will remove a bunch of unnecessary includes, but to do
so, we need some of the lower level direct includes that files rely on
to be explicitly specified.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CodingGuidelines documents stipulates that multi-word placeholders
are to be separated by dashes, not underscores nor spaces.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use mem_pool_calloc() to get a zeroed buffer instead of zeroing it
ourselves. This makes the code clearer and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
Code clean-up around use of configuration variables.
* jk/config-cleanup:
sequencer: simplify away extra git_config_string() call
gpg-interface: drop pointless config_error_nonbool() checks
push: drop confusing configset/callback redundancy
config: use git_config_string() for core.checkRoundTripEncoding
diff: give more detailed messages for bogus diff.* config
config: use config_error_nonbool() instead of custom messages
imap-send: don't use git_die_config() inside callback
git_xmerge_config(): prefer error() to die()
config: reject bogus values for core.checkstat
Some codepaths did not correctly parse configuration variables
specified with valueless "true", which has been corrected.
* jk/implicit-true:
fsck: handle NULL value when parsing message config
trailer: handle NULL value when parsing trailer-specific config
submodule: handle NULL value when parsing submodule.*.branch
help: handle NULL value for alias.* config
trace2: handle NULL values in tr2_sysenv config callback
setup: handle NULL value when parsing extensions
config: handle NULL value when parsing non-bools
"git bisect reset" has been taught to clean up state files and refs
even when BISECT_START file is gone.
* jk/bisect-reset-fix:
bisect: always clean on reset
Clean-up code that handles combinations of incompatible options.
* rs/incompatible-options-messages:
worktree: simplify incompatibility message for --orphan and commit-ish
worktree: standardize incompatibility messages
clean: factorize incompatibility message
revision, rev-parse: factorize incompatibility messages about - -exclude-hidden
revision: use die_for_incompatible_opt3() for - -graph/--reverse/--walk-reflogs
repack: use die_for_incompatible_opt3() for -A/-k/--cruft
push: use die_for_incompatible_opt4() for - -delete/--tags/--all/--mirror
In run_am(), a strbuf is used to create a revision argument that is then
added to the argument list for git format-patch using strvec_push().
Use strvec_pushf() to add it directly instead, simplifying the code
and plugging a small leak on the error code path.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "--force-with-lease" option was introduced in 28f5d176
(remote.c: add command line option parser for "--force-with-lease",
2013-07-08), the design discussion revolved around the concept of
"compare-and-swap", and it can still be seen in the name used for
variables and helper functions. The end-user facing option name
ended up to be a bit different, so during the development iteration
of the feature, we used this C preprocessor macro to make it easier
to rename it later.
All of that happened more than 10 years ago, and the flexibility
afforded by the CAS_OPT_NAME macro outlived its usefulness. Inline
the constant string for the option name, like all other option names
in the code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" learned to take the "--diff-algorithm" option to
use algorithm different from the default "myers" diff.
* ad/merge-file-diff-algo:
merge-file: add --diff-algorithm option
Clean-up code that handles combinations of incompatible options.
* rs/i18n-cannot-be-used-together:
i18n: factorize even more 'incompatible options' messages
Introduce "git replay", a tool meant on the server side without
working tree to recreate a history.
* cc/git-replay:
replay: stop assuming replayed branches do not diverge
replay: add --contained to rebase contained branches
replay: add --advance or 'cherry-pick' mode
replay: use standard revision ranges
replay: make it a minimal server side command
replay: remove HEAD related sanity check
replay: remove progress and info output
replay: add an important FIXME comment about gpg signing
replay: change rev walking options
replay: introduce pick_regular_commit()
replay: die() instead of failing assert()
replay: start using parse_options API
replay: introduce new builtin
t6429: remove switching aspects of fast-rebase
If an error occurs during an atomic fetch, a redundant error message
will appear at the end of do_fetch(). It was introduced in b3a804663c
(fetch: make `--atomic` flag cover backfilling of tags, 2022-02-17).
Because a failure message is displayed before setting retcode in the
function do_fetch(), calling error() on the err message at the end of
this function may result in redundant or empty error message to be
displayed.
We can remove the redundant error() function, because we know that
the function ref_transaction_abort() never fails. While we can find a
common pattern for calling ref_transaction_abort() by running command
"git grep -A1 ref_transaction_abort", e.g.:
if (ref_transaction_abort(transaction, &error))
error("abort: %s", error.buf);
Following this pattern, we can tolerate the return value of the function
ref_transaction_abort() being changed in the future. We also delay the
output of the err message to the end of do_fetch() to reduce redundant
code. With these changes, the test case "fetch porcelain output
(atomic)" in t5574 will also be fixed.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that both the pack-bitmap and pack-objects code are prepared to
handle marking and using objects from multiple bitmapped packs for
verbatim reuse, allow marking objects from all bitmapped packs as
eligible for reuse.
Within the `reuse_partial_packfile_from_bitmap()` function, we no longer
only mark the pack whose first object is at bit position zero for reuse,
and instead mark any pack contained in the MIDX as a reuse candidate.
Provide a handful of test cases in a new script (t5332) exercising
interesting behavior for multi-pack reuse to ensure that we performed
all of the previous steps correctly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e704fc7978 (pack-objects: introduce pack.allowPackReuse, 2019-12-18),
the `pack.allowPackReuse` configuration option was introduced, allowing
users to disable the pack reuse mechanism.
To prepare for debugging multi-pack reuse, allow setting configuration
to "single" in addition to the usual bool-or-int values.
"single" implies the same behavior as "true", "1", "yes", and so on. But
it will complement a new "multi" value (to be introduced in a future
commit). When set to "single", we will only perform pack reuse on a
single pack, regardless of whether or not there are multiple MIDX'd
packs.
This requires no code changes (yet), since we only support single pack
reuse.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the multi-pack reuse effort, we will want to add some tests
that assert that we reused a certain number of objects from a certain
number of packs.
We could do this by grepping through the stderr output of
`pack-objects`, but doing so would be brittle in case the output format
changed.
Instead, let's use the trace2 mechanism to log various pieces of
information about the generated packfile, which we can then use to
compare against desired values.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to including the number of objects reused verbatim from a
reuse-pack, include the number of packs from which objects were reused.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `write_reused_pack_verbatim()` within
`builtin/pack-objects.c` is responsible for writing out a continuous
set of objects beginning at the start of the reuse packfile.
In the existing implementation, we did something like:
while (pos < reuse_packfile_bitmap->word_alloc &&
reuse_packfile_bitmap->words[pos] == (eword_t)~0)
pos++;
if (pos)
/* write first `pos * BITS_IN_WORD` objects from pack */
as an optimization to record a single chunk for the longest continuous
prefix of objects wanted out of the reuse pack, instead of having a
chunk for each individual object. For more details, see bb514de356
(pack-objects: improve partial packfile reuse, 2019-12-18).
In order to retain this optimization in a multi-pack reuse world, we can
no longer assume that the first object in a pack is on a word boundary
in the bitmap storing the set of reusable objects.
Assuming that all objects from the beginning of the reuse packfile up to
the object corresponding to the first bit on a word boundary are part of
the result, consume whole words at a time until the last whole word
belonging to the reuse packfile. Copy those objects to the resulting
packfile, and track that we reused them by recording a single chunk.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `write_reused_pack()` within `builtin/pack-objects.c` is
responsible for performing pack-reuse on a single pack, and has two main
functions:
- it dispatches a call to `write_reused_pack_verbatim()` to see if we
can reuse portions of the packfile in whole-word chunks
- for any remaining objects (that is, any objects that appear after
the first "gap" in the bitmap), call write_reused_pack_one() on that
object to record it for reuse.
Prepare this function for multi-pack reuse by removing the assumption
that the bit position corresponding to the first object being reused
from a given pack must be at bit position zero.
The changes in this function are mostly straightforward. Initialize `i`
to the position of the first word to contain bits corresponding to that
reuse pack. In most situations, we throw the initialized value away,
since we end up replacing it with the return value from
write_reused_pack_verbatim(), moving us past the section of whole words
that we reused.
Likewise, modify the per-object loop to ignore any bits at the beginning
of the first word that do not belong to the pack currently being reused,
as well as skip to the "done" section once we have processed the last
bit corresponding to this pack.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further prepare pack-objects to perform verbatim pack-reuse over
multiple packfiles by converting functions that take in a pointer to a
`struct packed_git` to instead take in a pointer to a `struct
bitmapped_pack`.
The additional information found in the bitmapped_pack struct (such as
the bit position corresponding to the beginning of the pack) will be
necessary in order to perform verbatim pack-reuse.
Note that we don't use any of the extra pieces of information contained
in the bitmapped_pack struct, so this step is merely preparatory and
does not introduce any functional changes.
Note further that we do not change the argument type to
write_reused_pack_one(). That function is responsible for copying
sections of the packfile directly and optionally patching any OFS_DELTAs
to account for not reusing sections of the packfile in between a delta
and its base.
As such, that function is (and should remain) oblivious to multi-pack
reuse, and does not require any of the extra pieces of information
stored in the bitmapped_pack struct.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reusing objects from a pack, we keep track of a set of one or more
`reused_chunk`s, corresponding to sections of one or more object(s) from
a source pack that we are reusing. Each chunk contains two pieces of
information:
- the offset of the first object in the source pack (relative to the
beginning of the source pack)
- the difference between that offset, and the corresponding offset in
the pack we're generating
The purpose of keeping track of these is so that we can patch an
OFS_DELTAs that cross over a section of the reuse pack that we didn't
take.
For instance, consider a hypothetical pack as shown below:
(chunk #2)
__________...
/
/
+--------+---------+-------------------+---------+
... | <base> | <other> | (unused) | <delta> | ...
+--------+---------+-------------------+---------+
\ /
\______________/
(chunk #1)
Suppose that we are sending objects "base", "other", and "delta", and
that the "delta" object is stored as an OFS_DELTA, and that its base is
"base". If we don't send any objects in the "(unused)" range, we can't
copy the delta'd object directly, since its delta offset includes a
range of the pack that we didn't copy, so we have to account for that
difference when patching and reassembling the delta.
In order to compute this value correctly, we need to know not only where
we are in the packfile we're assembling (with `hashfile_total(f)`) but
also the position of the first byte of the packfile that we are
currently reusing. Currently, this works just fine, since when reusing
only a single pack those two values are always identical (because
verbatim reuse is the first thing pack-objects does when enabled after
writing the pack header).
But when reusing multiple packs which have one or more gaps, we'll need
to account for these two values diverging.
Together, these two allow us to compute the reused chunk's offset
difference relative to the start of the reused pack, as desired.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The routines pack-objects uses to perform verbatim pack-reuse are:
- write_reused_pack_one()
- write_reused_pack_verbatim()
- write_reused_pack()
, all of which assume that there is exactly one packfile being reused:
the global constant `reuse_packfile`.
Prepare for reusing objects from multiple packs by making reuse packfile
a parameter of each of the above functions in preparation for calling
these functions in a loop with multiple packfiles.
Note that we still have the global "reuse_packfile", but pass it through
each of the above function's parameter lists, eliminating all but one
direct access (the top-level caller in `write_pack_file()`). Even after
this series, we will still have a global, but it will hold the array of
reusable packfiles, and we'll pass them one at a time to these functions
in a loop.
Note also that we will eventually need to pass a `bitmapped_pack`
instead of a `packed_git` in order to hold onto additional information
required for reuse (such as the bit position of the first object
belonging to that pack). But that change will be made in a future commit
so as to minimize the noise below as much as possible.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further prepare for enabling verbatim pack-reuse over multiple packfiles
by changing the signature of reuse_partial_packfile_from_bitmap() to
populate an array of `struct bitmapped_pack *`'s instead of a pointer to
a single packfile.
Since the array we're filling out is sized dynamically[^1], add an
additional `size_t *` parameter which will hold the number of reusable
packs (equal to the number of elements in the array).
Note that since we still have not implemented true multi-pack reuse,
these changes aren't propagated out to the rest of the caller in
builtin/pack-objects.c.
In the interim state, we expect that the array has a single element, and
we use that element to fill out the static `reuse_packfile` variable
(which is a bog-standard `struct packed_git *`). Future commits will
continue to push this change further out through the pack-objects code.
[^1]: That is, even though we know the number of packs which are
candidates for pack-reuse, we do not know how many of those
candidates we can actually reuse.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The signature of `reuse_partial_packfile_from_bitmap()` currently takes
in a bitmap, as well as three output parameters (filled through
pointers, and passed as arguments), and also returns an integer result.
The output parameters are filled out with: (a) the packfile used for
pack-reuse, (b) the number of objects from that pack that we can reuse,
and (c) a bitmap indicating which objects we can reuse. The return value
is either -1 (when there are no objects to reuse), or 0 (when there is
at least one object to reuse).
Some of these parameters are redundant. Notably, we can infer from the
bitmap how many objects are reused by calling bitmap_popcount(). And we
can similar compute the return value based on that number as well.
As such, clean up the signature of this function to drop the "*entries"
parameter, as well as the int return value, since the single caller of
this function can infer these values themself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-objects internals use a packing_data struct to track what
objects are part of the pack(s) being formed.
Since these structures contain allocated fields, failing to
appropriately free() them results in a leak. Plug that leak by
introducing a clear_packing_data() function, and call it in the
appropriate spots.
This is a fairly straightforward leak to plug, since none of the callers
expect to read any values or have any references to parts of the address
space being freed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're inconsistently writing BISECT_EXPECTED_REV both via the filesystem
and via the refdb, which violates the newly established rules for how
special refs must be treated. This works alright in practice with the
reffiles reference backend, but will cause bugs once we gain additional
backends.
Fix this issue and consistently write BISECT_EXPECTED_REV via the refdb
so that it is no longer a special ref.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -B <branch> [<start-point>]", being a "forced" version
of "-b", switches to the <branch>, after optionally resetting its
tip to the <start-point>, even if the <branch> is in use in another
worktree, which is somewhat unexpected.
Protect the <branch> using the same logic that forbids "git checkout
<branch>" from touching a branch that is in use elsewhere.
This is a breaking change that may deserve backward compatibliity
warning in the Release Notes. The "--ignore-other-worktrees" option
can be used as an escape hatch if the finger memory of existing
users depend on the current behaviour of "-B".
Reported-by: Willem Verstraeten <willem.verstraeten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're currently creating the reference database with a potentially
incorrect object format when the remote repository's object format is
different from the local default object format. This works just fine for
now because the files backend never records the object format anywhere.
But this logic will fail with any new reference backend that encodes
this information in some form either on-disk or in-memory.
The preceding commits have reshuffled code in git-clone(1) so that there
is no code path that will access the reference database before we have
detected the remote's object format. With these refactorings we can now
defer initialization of the reference database until after we have
learned the remote's object format and thus initialize it with the
correct format from the get-go.
These refactorings are required to make git-clone(1) work with the
upcoming reftable backend when cloning repositories with the SHA256
object format.
This change breaks a test in "t5550-http-fetch-dumb.sh" when cloning an
empty repository with `GIT_TEST_DEFAULT_HASH=sha256`. The test expects
the resulting hash format of the empty cloned repository to match the
default hash, but now we always end up with a sha1 repository. The
problem is that for dumb HTTP fetches, we have no easy way to figure out
the remote's hash function except for deriving it based on the hash
length of refs in `info/refs`. But as the remote repository is empty we
cannot rely on this detection mechanism.
Before the change in this commit we already initialized the repository
with the default hash function and then left it as-is. With this patch
we always use the hash function detected via the remote, where we fall
back to "sha1" in case we cannot detect it.
Neither the old nor the new behaviour are correct as we second-guess the
remote hash function in both cases. But given that this is a rather
unlikely edge case (we use the dumb HTTP protocol, the remote repository
uses SHA256 and the remote repository is empty), let's simply adapt the
test to assert the new behaviour. If we want to properly address this
edge case in the future we will have to extend the dumb HTTP protocol so
that we can properly detect the hash function for empty repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we have set up the remote configuration in git-clone(1) we'll call
`remote_get()` to read the remote from the on-disk configuration. But
next to reading the on-disk configuration, `remote_get()` will also
cause us to try and read the repository's HEAD reference so that we can
figure out the current branch. Besides being pointless in git-clone(1)
because we're operating in an empty repository anyway, this will also
break once we move creation of the reference database to a later point
in time.
Refactor the code to introduce a new `remote_get_early()` function that
will skip reading the HEAD reference to address this issue.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asked to do a sparse checkout, then git-clone(1) will spawn
`git sparse-checkout set` to set up the configuration accordingly. This
requires a proper Git repository or otherwise the command will fail. But
as we are about to move creation of the reference database to a later
point, this prerequisite will not hold anymore.
Move the logic to a later point in time where we know to have created
the reference database already.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create the reference database in git-clone(1) quite early before
connecting to the remote repository. Given that we do not yet know about
the object format that the remote repository uses at that point in time
the consequence is that the refdb may be initialized with the wrong
object format.
This is not a problem in the context of the files backend as we do not
encode the object format anywhere, and furthermore the only reference
that we write between initializing the refdb and learning about the
object format is the "HEAD" symref. It will become a problem though once
we land the reftable backend, which indeed does require to know about
the proper object format at the time of creation. We thus need to
rearrange the logic in git-clone(1) so that we only initialize the refdb
once we have learned about the actual object format.
As a first step, move listing of remote references to happen earlier,
which also allow us to set up the hash algorithm of the repository
earlier now. While we aim to execute this logic as late as possible
until after most of the setup has happened already, detection of the
object format and thus later the setup of the reference database must
happen before any other logic that may spawn Git commands or otherwise
these Git commands may not recognize the repository as such.
The first Git step where we expect the repository to be fully initalized
is when we fetch bundles via bundle URIs. Funny enough, the comments
there also state that "the_repository must match the cloned repo", which
is indeed not necessarily the case for the hash algorithm right now. So
in practice it is the right thing to detect the remote's object format
before downloading bundle URIs anyway, and not doing so causes clones
with bundle URIs to fail when the local default object format does not
match the remote repository's format.
Unfortunately though, this creates a new issue: downloading bundles may
take a long time, so if we list refs beforehand they might've grown
stale meanwhile. It is not clear how to solve this issue except for a
second reference listing though after we have downloaded the bundles,
which may be an expensive thing to do.
Arguably though, it's preferable to have a staleness issue compared to
being unable to clone a repository altogether.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard message for reporting the use of multiple mutually
exclusive options by calling die_for_incompatible_opt3() instead of
rolling our own. This has the benefits of showing only the actually
given options, reducing the number of strings to translate and making
the UI slightly more consistent.
Adjust the test to no longer insist on a specific order of the
reported options, as this implementation detail does not affect the
usefulness of the error message.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --autosquash" is now enabled for non-interactive rebase,
but it is still incompatible with the apply backend.
* ak/rebase-autosquash:
rebase: rewrite --(no-)autosquash documentation
rebase: support --autosquash without -i
rebase: fully ignore rebase.autoSquash without -i
"git for-each-ref --no-sort" still sorted the refs alphabetically
which paid non-trivial cost. It has been redefined to show output
in an unspecified order, to allow certain optimizations to take
advantage of.
* vd/for-each-ref-unsorted-optimization:
t/perf: add perf tests for for-each-ref
ref-filter.c: use peeled tag for '*' format fields
for-each-ref: clean up documentation of --format
ref-filter.c: filter & format refs in the same callback
ref-filter.c: refactor to create common helper functions
ref-filter.c: rename 'ref_filter_handler()' to 'filter_one()'
ref-filter.h: add functions for filter/format & format-only
ref-filter.h: move contains caches into filter
ref-filter.h: add max_count and omit_empty to ref_format
ref-filter.c: really don't sort when using --no-sort
"git format-patch --encode-email-headers" ignored the option when
preparing the cover letter, which has been corrected.
* ss/format-patch-use-encode-headers-for-cover-letter:
format-patch: fix ignored encode_email_headers for cover letter
"git add" and "git stash" learned to support the ":(attr:...)"
magic pathspec.
* jw/git-add-attr-pathspec:
attr: enable attr pathspec magic for git-add and git-stash
We parse push config by calling git_config() with our git_push_config()
callback. But inside that callback, when we see "push.gpgsign", we
ignore the value passed into the callback and instead make a new call to
git_config_get_value().
This is unnecessary at best, and slightly wrong at worst (if there are
multiple instances, get_value() only returns one; both methods end up
with last-one-wins, but we'd fail to report errors if earlier
incarnations were bogus).
The call was added by 68c757f219 (push: add a config option push.gpgSign
for default signed pushes, 2015-08-19). That commit doesn't give any
reason to deviate from the usual strategy here; it was probably just
somebody unfamiliar with our config API and its conventions.
It also added identical code to builtin/send-pack.c, which also handles
push.gpgsign.
And then the same issue spread to its neighbor in b33a15b081 (push: add
recurseSubmodules config option, 2015-11-17), presumably via
cargo-culting.
This patch fixes all three to just directly use the value provided to
the callback. While I was adjusting the code to do so, I noticed that
push.gpgsign is overly careful about a NULL value. After
git_parse_maybe_bool() has returned anything besides 1, we know that the
value cannot be NULL (if it were, it would be an implicit "true", and
many callers of maybe_bool rely on that). Here that lets us shorten "if
(v && !strcasecmp(v, ...))" to just "if (!strcasecmp(v, ...))".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing fsck.*, receive.fsck.*, or fetch.fsck.*, we don't check for
an implicit bool. So any of:
[fsck]
badTree
[receive "fsck"]
badTree
[fetch "fsck"]
badTree
will cause us to segfault. We can fix it with config_error_nonbool() in
the usual way, but we have to make a few more changes to get good error
messages. The problem is that all three spots do:
if (skip_prefix(var, "fsck.", &var))
to match and parse the actual message id. But that means that "var" now
just says "badTree" instead of "receive.fsck.badTree", making the
resulting message confusing. We can fix that by storing the parsed
message id in its own separate variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the config parser sees an "implicit" bool like:
[core]
someVariable
it passes NULL to the config callback. Any callback code which expects a
string must check for NULL. This usually happens via helpers like
git_config_string(), etc, but some custom code forgets to do so and will
segfault.
These are all fairly vanilla cases where the solution is just the usual
pattern of:
if (!value)
return config_error_nonbool(var);
though note that in a few cases we have to split initializers like:
int some_var = initializer();
into:
int some_var;
if (!value)
return config_error_nonbool(var);
some_var = initializer();
There are still some broken instances after this patch, which I'll
address on their own in individual patches after this one.
Reported-by: Carlos Andrés Ramírez Cataño <antaigroupltda@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually "bisect reset" cleans up any refs/bisect/ refs, along with
meta-files like .git/BISECT_LOG. But it only does so after deciding that
a bisection is active, which it does by reading BISECT_START. This is
usually fine, but it's possible to get into a confusing state if the
BISECT_START file is gone, but other cruft is left (this might be due to
a bug, or a system crash, etc).
And since "bisect reset" refuses to do anything in this state, the user
has no easy way to clean up the leftover cruft. While another "bisect
start" would clear the state, in the interim it can be annoying, as
other tools (like our bash prompt code) think we are bisecting, and
for-each-ref output may be polluted with refs/bisect/ entries.
Further adding to the confusion is that running "bisect reset $some_ref"
skips the BISECT_START check. So it never realizes that there's no
bisection active and does the cleanup anyway!
So let's just make sure we always do the cleanup, whether we looked at
BISECT_START or not. If the user doesn't give us a commit to reset to,
we'll still say "We are not bisecting" and skip the call to "git
checkout".
Reported-by: Janik Haag <janik@aq0.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a single translatable string to report that the worktree add option
--orphan is incompatible with a commit-ish instead of having the
commit-ish in a separate translatable string. This reduces the number
of strings to translate and gives translators the full context.
A similar message is used in builtin/describe.c, but with the plural of
commit-ish, and here we need the singular form.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard parameterized message for reporting incompatible
options for worktree add. This reduces the number of strings to
translate and makes the UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard parameterized message for reporting incompatible
options to inform users that they can't use -x and -X together. This
reduces the number of strings to translate and makes the UI slightly
more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard parameterized message for reporting incompatible
options to report options that are not accepted in combination with
--exclude-hidden. This reduces the number of strings to translate and
makes the UI a bit more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repack option --keep-unreachable is incompatible with -A, --cruft is
incompatible with -A and -k, and -k is short for --keep-unreachable. So
they are all incompatible with each other.
Use the function for checking three mutually incompatible options,
die_for_incompatible_opt3(), to perform this check in one place and
without repetition. This is shorter and clearer.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The push option --delete is incompatible with --all, --mirror, and
--tags; --tags is incompatible with --all and --mirror; --all is
incompatible with --mirror. This means they are all incompatible with
each other. And --branches is an alias for --all.
Use the function for checking four mutually incompatible options,
die_for_incompatible_opt4(), to perform this check in one place and
without repetition. This is shorter and clearer.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the work of 12909b6b8a (i18n: turn "options are incompatible"
into "cannot be used together", 2022-01-05) and a699367bb8 (i18n:
factorize more 'incompatible options' messages, 2022-01-31) to use the
same parameterized error message for reporting incompatible command line
options. This reduces the number of strings to translate and makes the
UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Releasing strbuf and string_list just before exiting is not strictly
necessary, but it gets rid of false positives reported by leak checkers,
which can then be more easily used to show that the column-printing
machinery behind print_columns() are free of leaks.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The replay command is able to replay multiple branches but when some of
them are based on other replayed branches, their commit should be
replayed onto already replayed commits.
For this purpose, let's store the replayed commit and its original
commit in a key value store, so that we can easily find and reuse a
replayed commit instead of the original one.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's add a `--contained` option that can be used along with
`--onto` to rebase all the branches contained in the <revision-range>
argument.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already a 'rebase' mode with `--onto`. Let's add an 'advance' or
'cherry-pick' mode with `--advance`. This new mode will make the target
branch advance as we replay commits onto it.
The replayed commits should have a single tip, so that it's clear where
the target branch should be advanced. If they have more than one tip,
this new mode will error out.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of the fixed "<oldbase> <branch>" arguments, the replay
command now accepts "<revision-range>..." arguments in a similar
way as many other Git commands. This makes its interface more
standard and more flexible.
This also enables many revision related options accepted and
eaten by setup_revisions(). If the replay command was a high level
one or had a high level mode, it would make sense to restrict some
of the possible options, like those generating non-contiguous
history, as they could be confusing for most users.
Also as the interface of the command is now mostly finalized,
we can add more documentation and more testcases to make sure
the command will continue to work as designed in the future.
We only document the rev-list related options among all the
revision related options that are now accepted, as the rev-list
related ones are probably the most useful for now.
Helped-by: Dragan Simic <dsimic@manjaro.org>
Helped-by: Linus Arver <linusa@google.com>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want this command to be a minimal command that just does server side
picking of commits, displaying the results on stdout for higher level
scripts to consume.
So let's simplify it:
* remove the worktree and index reading/writing,
* remove the ref (and reflog) updating,
* remove the assumptions tying us to HEAD, since (a) this is not a
rebase and (b) we want to be able to pick commits in a bare repo,
i.e. to/from branches that are not checked out and not the main
branch,
* remove unneeded includes,
* handle rebasing multiple branches by printing on stdout the update
ref commands that should be performed.
The output can be piped into `git update-ref --stdin` for the ref
updates to happen.
In the future to make it easier for users to use this command
directly maybe an option can be added to automatically pipe its output
into `git update-ref`.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want replay to be a command that can be used on the server side on
any branch, not just the current one, so we are going to stop updating
HEAD in a future commit.
A "sanity check" that makes sure we are replaying the current branch
doesn't make sense anymore. Let's remove it.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The replay command will be changed in a follow up commit, so that it
will not update refs directly, but instead it will print on stdout a
list of commands that can be consumed by `git update-ref --stdin`.
We don't want this output to be polluted by its current low value
output, so let's just remove the latter.
In the future, when the command gets an option to update refs by
itself, it will make a lot of sense to display a progress meter, but
we are not there yet.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to be able to handle signed commits in some way in the future,
but we are not ready to do it now. So for the time being let's just add
a FIXME comment to remind us about it.
These are different ways we could handle them:
- in case of a cli user and if there was an interactive mode, we could
perhaps ask if the user wants to sign again
- we could add an option to just fail if there are signed commits
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's force the rev walking options we need after calling
setup_revisions() instead of before.
This might override some user supplied rev walking command line options
though. So let's detect that and warn users by:
a) setting the desired values, before setup_revisions(),
b) checking after setup_revisions() whether these values differ from
the desired values,
c) if so throwing a warning and setting the desired values again.
We want the command to work from older commits to newer ones by default.
Also we don't want history simplification, as we want to deal with all
the commits in the affected range.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's refactor the code to handle a regular commit (a commit that is
neither a root commit nor a merge commit) into a single function instead
of keeping it inside cmd_replay().
This is good for separation of concerns, and this will help further work
in the future to replay merge commits.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not a good idea for regular Git commands to use an assert() to
check for things that could happen but are not supported.
Let's die() with an explanation of the issue instead.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of manually parsing arguments, let's start using the parse_options
API. This way this new builtin will look more standard, and in some
upcoming commits will more easily be able to handle more command line
options.
Note that we plan to later use standard revision ranges instead of
hardcoded "<oldbase> <branch>" arguments. When we will use standard
revision ranges, it will be easier to check if there are no spurious
arguments if we keep ARGV[0], so let's call parse_options() with
PARSE_OPT_KEEP_ARGV0 even if we don't need ARGV[0] right now to avoid
some useless code churn.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, this is just a rename from `t/helper/test-fast-rebase.c` into
`builtin/replay.c` with minimal changes to make it build appropriately.
Let's add a stub documentation and a stub test script though.
Subsequent commits will flesh out the capabilities of the new command
and make it a more standard regular builtin.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for reflog states that the --dry-run option of the
expire and delete subcommands has a corresponding short name, -n.
However, 33d7bdd645 (builtin/reflog.c: use parse-options api for expire,
delete subcommands, 2022-01-06) did not include this short name in the
new options parsing.
Re-add the short name in the new dry-run option definitions.
Signed-off-by: Josh Brobst <josh@brob.st>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"orphan branch" is not even grammatical ("orphaned branch" is), and
we have been using "unborn branch" to mean the state where the HEAD
points at a branch that does not yet exist.
Update end-user facing messages to correct them. There are cases
other random words are used (e.g., "unparented branch") but now we
have a glossary entry, use the term "unborn branch" consistently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bit dense logic to make a call to "die_if_checked_out()"
while trying to check out a branch. Extract it into a helper
function and give it a bit of comment to describe what is going on.
The most important part of the refactoring is the separation of the
guarding logic before making the call to die_if_checked_out() into
the caller specific part (e.g., the logic that decides that the
caller is trying to check out an existing branch) and the bypass due
to the "--ignore-other-worktrees" option. The latter will be common
no matter how the current or future callers decides they need this
protection.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to use other diff algorithms than the 'myers'
default algorithm, when using the 'git merge-file' command, to help
avoid spurious conflicts by selecting a more recent algorithm such
as 'histogram', for instance when using 'git merge-file' as part of
a custom merge driver.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Reviewed-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new public methods to 'ref-filter.h':
* 'print_formatted_ref_array()' which, given a format specification & array
of ref items, formats and prints the items to stdout.
* 'filter_and_format_refs()' which combines 'filter_refs()',
'ref_array_sort()', and 'print_formatted_ref_array()' into a single
function.
This consolidates much of the code used to filter and format refs in
'builtin/for-each-ref.c', 'builtin/tag.c', and 'builtin/branch.c', reducing
duplication and simplifying the future changes needed to optimize the filter
& format process.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an internal 'array_opts' struct to 'struct ref_format' containing
formatting options that pertain to the formatting of an entire ref array:
'max_count' and 'omit_empty'. These values are specified by the '--count'
and '--omit-empty' options, respectively, to 'for-each-ref'/'tag'/'branch'.
Storing these values in the 'ref_format' will simplify the consolidation of
ref array formatting logic across builtins in later patches.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When '--no-sort' is passed to 'for-each-ref', 'tag', and 'branch', the
printed refs are still sorted by ascending refname. Change the handling of
sort options in these commands so that '--no-sort' to truly disables
sorting.
'--no-sort' does not disable sorting in these commands is because their
option parsing does not distinguish between "the absence of '--sort'"
(and/or values for tag.sort & branch.sort) and '--no-sort'. Both result in
an empty 'sorting_options' string list, which is parsed by
'ref_sorting_options()' to create the 'struct ref_sorting *' for the
command. If the string list is empty, 'ref_sorting_options()' interprets
that as "the absence of '--sort'" and returns the default ref sorting
structure (equivalent to "refname" sort).
To handle '--no-sort' properly while preserving the "refname" sort in the
"absence of --sort'" case, first explicitly add "refname" to the string list
*before* parsing options. This alone doesn't actually change any behavior,
since 'compare_refs()' already falls back on comparing refnames if two refs
are equal w.r.t all other sort keys.
Now that the string list is populated by default, '--no-sort' is the only
way to empty the 'sorting_options' string list. Update
'ref_sorting_options()' to return a NULL 'struct ref_sorting *' if the
string list is empty, and add a condition to 'ref_array_sort()' to skip the
sort altogether if the sort structure is NULL. Note that other functions
using 'struct ref_sorting *' do not need any changes because they already
ignore NULL values.
Finally, remove the condition around sorting in 'ls-remote', since it's no
longer necessary. Unlike 'for-each-ref' et. al., it does *not* do any
sorting by default. This default is preserved by simply leaving its sort key
string list empty before parsing options; if no additional sort keys are
set, 'struct ref_sorting *' is NULL and sorting is skipped.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase --autosquash option is quietly ignored when used without
--interactive (apart from preventing preemptive fast-forwarding and
triggering conflicts with apply backend options).
Change that to support --autosquash without --interactive, by dropping
its restriction to REBASE_INTERACTIVE_EXCPLICIT mode. When used this
way, auto-squashing is done without opening the todo list editor.
Drop the -i requirement from the --autosquash description, and amend
t3415-rebase-autosquash.sh to test the option and the rebase.autoSquash
config variable with and without -i.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting the rebase.autoSquash config variable to true implies a couple
of restrictions: it prevents preemptive fast-forwarding and it triggers
conflicts with apply backend options. However, it only actually results
in auto-squashing when combined with the --interactive (or -i) option,
due to code in run_specific_rebase() that disables auto-squashing unless
the REBASE_INTERACTIVE_EXPLICIT flag is set.
Doing autosquashing for rebase.autoSquash without --interactive would be
problematic in terms of backward compatibility, but conversely, there is
no need for the aforementioned restrictions without --interactive.
So drop the options.config_autosquash check from the conditions for
clearing allow_preemptive_ff, as the case where it is combined with
--interactive is already covered by the REBASE_INTERACTIVE_EXPLICIT
flag check above it.
Also drop the "apply options are incompatible with rebase.autoSquash"
error, because it is unreachable if it is restricted to --interactive,
as apply options already cause an error when used with --interactive.
Drop the tests for the error from t3422-rebase-incompatible-options.sh,
which has separate tests for the conflicts of --interactive with apply
options.
When neither --autosquash nor --no-autosquash are given, only set
options.autosquash to true if rebase.autosquash is combined with
--interactive.
Don't initialize options.config_autosquash to -1, as there is no need to
distinguish between rebase.autoSquash being unset or explicitly set to
false.
Finally, amend the rebase.autoSquash documentation to say it only
affects interactive mode.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing the cover letter, the encode_email_headers option was
ignored. That is, UTF-8 subject lines and email addresses were
written out as-is, without any Q-encoding, even if
--encode-email-headers was passed on the command line.
This is due to encode_email_headers not being copied over from
struct rev_info to struct pretty_print_context. Fix that and add
a test.
Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" learns a mode to read three contents to be merged
from blob objects.
* bc/merge-file-object-input:
merge-file: add an option to process object IDs
git-merge-file doc: drop "-file" from argument placeholders
"git rev-list --missing" did not work for missing commit objects,
which has been corrected.
* kn/rev-list-missing-fix:
rev-list: add commit object support in `--missing` option
rev-list: move `show_commit()` to the bottom
revision: rename bit to `do_not_die_on_missing_objects`
Teach "git show-ref" a mode to check the existence of a ref.
* ps/show-ref:
t: use git-show-ref(1) to check for ref existence
builtin/show-ref: add new mode to check for reference existence
builtin/show-ref: explicitly spell out different modes in synopsis
builtin/show-ref: ensure mutual exclusiveness of subcommands
builtin/show-ref: refactor options for patterns subcommand
builtin/show-ref: stop using global vars for `show_one()`
builtin/show-ref: stop using global variable to count matches
builtin/show-ref: refactor `--exclude-existing` options
builtin/show-ref: fix dead code when passing patterns
builtin/show-ref: fix leaking string buffer
builtin/show-ref: split up different subcommands
builtin/show-ref: convert pattern to a local variable
"git bugreport" learned to complain when it received a command line
argument that it will not use.
* es/bugreport-no-extra-arg:
bugreport: reject positional arguments
t0091-bugreport: stop using i18ngrep
"git reflog expire --single-worktree" has been broken for the past
20 months or so, which has been corrected.
* rs/reflog-expire-single-worktree-fix:
reflog: fix expire --single-worktree
"cd sub && git grep -f patterns" tried to read "patterns" file at
the top level of the working tree; it has been corrected to read
"sub/patterns" instead.
* jc/grep-f-relative-to-cwd:
grep: -f <path> is relative to $cwd
Allow users to limit or exclude files based on file attributes
during git-add and git-stash.
For example, the chromium project would like to use
$ git add . ':(exclude,attr:submodule)'
as submodules are managed by an external tool, forbidding end users
to record changes with "git add". Allowing "git add" to often
records changes that users do not want in their commits.
This commit does not change any attr magic implementation. It is
only adding attr as an allowed pathspec in git-add and git-stash,
which was previously blocked by GUARD_PATHSPEC and a pathspec mask
in parse_pathspec()).
However, we fix a bug in prefix_magic() where attr values were
unintentionally removed. This was triggerable when parse_pathspec()
is called with PATHSPEC_PREFIX_ORIGIN as a flag, which was the case
for git-stash (Bug originally filed here [*])
Furthermore, while other commands hit this code path it did not
result in unexpected behavior because this bug only impacts the
pathspec->items->original field which is NOT used to filter
paths. However, git-stash does use pathspec->items->original when
building args used to call other git commands. (See add_pathspecs()
usage and implementation in stash.c)
It is possible that when the attr pathspec feature was first added
in b0db704652 (pathspec: allow querying for attributes, 2017-03-13),
"PATHSPEC_ATTR" was just unintentionally left out of a few
GUARD_PATHSPEC() invocations.
Later, to get a more user-friendly error message when attr was used
with git-add, PATHSPEC_ATTR was added as a mask to git-add's
invocation of parse_pathspec() 84d938b732 (add: do not accept
pathspec magic 'attr', 2018-09-18). However, this user-friendly
error message was never added for git-stash.
[Reference]
* https://lore.kernel.org/git/CAMmZTi-0QKtj7Q=sbC5qhipGsQxJFOY-Qkk1jfkRYwfF5FcUVg@mail.gmail.com/)
Signed-off-by: Joanna Wang <jojwang@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git maintainance" timers' implementation based on systemd
timers to work with WSL.
* js/systemd-timers-wsl-fix:
maintenance(systemd): support the Windows Subsystem for Linux
"git grep -e A --no-or -e B" is accepted, even though the negation
of "or" did not mean anything, which has been tightened.
* rs/grep-no-no-or:
grep: reject --no-or
"git diff --no-such-option" and other corner cases around the exit
status of the "diff" command has been corrected.
* jk/diff-result-code-cleanup:
diff: drop useless "status" parameter from diff_result_code()
diff: drop useless return values in git-diff helpers
diff: drop useless return from run_diff_{files,index} functions
diff: die when failing to read index in git-diff builtin
diff: show usage for unknown builtin_diff_files() options
diff-files: avoid negative exit value
diff: spell DIFF_INDEX_CACHED out when calling run_diff_index()
transfer.unpackLimit ought to be used as a fallback, but overrode
fetch.unpackLimit and receive.unpackLimit instead.
* ts/unpacklimit-config-fix:
transfer.unpackLimit: fetch/receive.unpackLimit takes precedence
git merge-file knows how to merge files on the file system already. It
would be helpful, however, to allow it to also merge single blobs.
Teach it an `--object-id` option which means that its arguments are
object IDs and not files to allow it to do so.
We handle the empty blob specially since read_mmblob doesn't read it
directly and otherwise users cannot specify an empty ancestor.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we have multiple ways to show the value of a given reference, we
do not have any way to check whether a reference exists at all. While
commands like git-rev-parse(1) or git-show-ref(1) can be used to check
for reference existence in case the reference resolves to something
sane, neither of them can be used to check for existence in some other
scenarios where the reference does not resolve cleanly:
- References which have an invalid name cannot be resolved.
- References to nonexistent objects cannot be resolved.
- Dangling symrefs can be resolved via git-symbolic-ref(1), but this
requires the caller to special case existence checks depending on
whether or not a reference is symbolic or direct.
Furthermore, git-rev-list(1) and other commands do not let the caller
distinguish easily between an actually missing reference and a generic
error.
Taken together, this seems like sufficient motivation to introduce a
separate plumbing command to explicitly check for the existence of a
reference without trying to resolve its contents.
This new command comes in the form of `git show-ref --exists`. This
new mode will exit successfully when the reference exists, with a
specific exit code of 2 when it does not exist, or with 1 when there
has been a generic error.
Note that the only way to properly implement this command is by using
the internal `refs_read_raw_ref()` function. While the public function
`refs_resolve_ref_unsafe()` can be made to behave in the same way by
passing various flags, it does not provide any way to obtain the errno
with which the reference backend failed when reading the reference. As
such, it becomes impossible for us to distinguish generic errors from
the explicit case where the reference wasn't found.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis treats the `--verify` and the implicit mode the same. They
are slightly different though:
- They accept different sets of flags.
- The implicit mode accepts patterns while the `--verify` mode
accepts references.
Split up the synopsis for these two modes such that we can disambiguate
those differences.
While at it, drop "--quiet" from the pattern mode's synopsis. It does
not make a lot of sense to list patterns, but squelch the listing output
itself. The description for "--quiet" is adapted accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-show-ref(1) command has three different modes, of which one is
implicit and the other two can be chosen explicitly by passing a flag.
But while these modes are standalone and cause us to execute completely
separate code paths, we gladly accept the case where a user asks for
both `--exclude-existing` and `--verify` at the same time even though it
is not obvious what will happen. Spoiler: we ignore `--verify` and
execute the `--exclude-existing` mode.
Let's explicitly detect this invalid usage and die in case both modes
were requested.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patterns subcommand is the last command that still uses global
variables to track its options. Convert it to use a structure instead
with the same motivation as preceding commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `show_one()` function implicitly receives a bunch of options which
are tracked via global variables. This makes it hard to see which
subcommands of git-show-ref(1) actually make use of these options.
Introduce a `show_one_options` structure that gets passed down to this
function. This allows us to get rid of more global state and makes it
more explicit which subcommands use those options.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing patterns to git-show-ref(1) we're checking whether any
reference matches -- if none do, we indicate this condition via an
unsuccessful exit code.
We're using a global variable to count these matches, which is required
because the counter is getting incremented in a callback function. But
now that we have the `struct show_ref_data` in place, we can get rid of
the global variable and put the counter in there instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not immediately obvious options which options are applicable to
what subcommand in git-show-ref(1) because all options exist as global
state. This can easily cause confusion for the reader.
Refactor options for the `--exclude-existing` subcommand to be contained
in a separate structure. This structure is stored on the stack and
passed down as required. Consequently, it clearly delimits the scope of
those options and requires the reader to worry less about global state.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing patterns to `git show-ref` we have some code that will
cause us to die if `verify && !quiet` is true. But because `verify`
indicates a different subcommand of git-show-ref(1) that causes us to
execute `cmd_show_ref__verify()` and not `cmd_show_ref__patterns()`, the
condition cannot ever be true.
Let's remove this dead code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a leaking string buffer in `git show-ref --exclude-existing`. While
the buffer is technically not leaking because its variable is declared
as static, there is no inherent reason why it should be.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While not immediately obvious, git-show-ref(1) actually implements three
different subcommands:
- `git show-ref <patterns>` can be used to list references that
match a specific pattern.
- `git show-ref --verify <refs>` can be used to list references.
These are _not_ patterns.
- `git show-ref --exclude-existing` can be used as a filter that
reads references from standard input, performing some conversions
on each of them.
Let's make this more explicit in the code by splitting up the three
subcommands into separate functions. This also allows us to address the
confusingly named `patterns` variable, which may hold either patterns or
reference names.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `pattern` variable is a global variable that tracks either the
reference names (not patterns!) for the `--verify` mode or the patterns
for the non-verify mode. This is a bit confusing due to the slightly
different meanings.
Convert the variable to be local. While this does not yet fix the double
meaning of the variable, this change allows us to address it in a
subsequent patch more easily by explicitly splitting up the different
subcommands of git-show-ref(1).
Note that we introduce a `struct show_ref_data` to pass the patterns to
`show_ref()`. While this is overengineered now, we will extend this
structure in a subsequent patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--missing` object option in rev-list currently works only with
missing blobs/trees. For missing commits the revision walker fails with
a fatal error.
Let's extend the functionality of `--missing` option to also support
commit objects. This is done by adding a `missing_objects` field to
`rev_info`. This field is an `oidset` to which we'll add the missing
commits as we encounter them. The revision walker will now continue the
traversal and call `show_commit()` even for missing commits. In rev-list
we can then check if the commit is a missing commit and call the
existing code for parsing `--missing` objects.
A scenario where this option would be used is to find the boundary
objects between different object directories. Consider a repository with
a main object directory (GIT_OBJECT_DIRECTORY) and one or more alternate
object directories (GIT_ALTERNATE_OBJECT_DIRECTORIES). In such a
repository, using the `--missing=print` option while disabling the
alternate object directory allows us to find the boundary objects
between the main and alternate object directory.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `show_commit()` function already depends on `finish_commit()`, and
in the upcoming commit, we'll also add a dependency on
`finish_object__ma()`. Since in C symbols must be declared before
they're used, let's move `show_commit()` below both `finish_commit()`
and `finish_object__ma()`, so the code is cleaner as a whole without the
need for declarations.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bit `do_not_die_on_missing_tree` is used in revision.h to ensure the
revision walker does not die when encountering a missing tree. This is
currently exclusively set within `builtin/rev-list.c` to ensure the
`--missing` option works with missing trees.
In the upcoming commits, we will extend `--missing` to also support
missing commits. So let's rename the bit to
`do_not_die_on_missing_objects`, which is object type agnostic and can
be used for both trees/commits.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ob/rebase-cleanup:
rebase: move parse_opt_keep_empty() down
rebase: handle --strategy via imply_merge() as well
rebase: simplify code related to imply_merge()
33d7bdd645 (builtin/reflog.c: use parse-options api for expire, delete
subcommands, 2022-01-06) broke the option --single-worktree of git
reflog expire and added a non-printable short flag for it, presumably by
accident. While before it set the variable "all_worktrees" to 0, now it
sets it to 1, its default value. --no-single-worktree is required now
to set it to 0.
Fix it by replacing the variable with one that has the opposite meaning,
to avoid the negation and its potential for confusion. The new variable
"single_worktree" directly captures whether --single-worktree was given.
Also remove the unprintable short flag SOH (start of heading) because it
is undocumented, hard to use and is likely to have been added by mistake
in connection with the negation bug above.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use parentheses and pipes to present alternatives in the argument help
for the --empty options of git am and git rebase, like in the rest of
the documentation.
While at it remove a stray use of the enum empty_action value
STOP_ON_EMPTY_COMMIT to indicate that no short option is present.
While it has a value of 0 and thus there is no user-visible change,
that enum is not meant to hold short option characters. Hard-code 0,
like we do for other options without a short option.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let the parse-options code detect and handle the use of options that are
incompatible with --show-current-patch. This requires exposing the
distinction between the "raw" and "diff" sub-modes. Do that by
splitting the mode RESUME_SHOW_PATCH into RESUME_SHOW_PATCH_RAW and
RESUME_SHOW_PATCH_DIFF and stop tracking sub-modes in a separate struct.
The result is a simpler callback function and more precise error
messages. The original reports a spurious argument or a NULL pointer:
$ git am --show-current-patch --show-current-patch=diff
error: options '--show-current-patch=diff' and '--show-current-patch=raw' cannot be used together
$ git am --show-current-patch=diff --show-current-patch
error: options '--show-current-patch=(null)' and '--show-current-patch=diff' cannot be used together
With this patch we get the more precise:
$ git am --show-current-patch --show-current-patch=diff
error: --show-current-patch=diff is incompatible with --show-current-patch
$ git am --show-current-patch=diff --show-current-patch
error: --show-current-patch is incompatible with --show-current-patch=diff
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-bugreport already rejected unrecognized flag arguments, like
`--diaggnose`, but this doesn't help if the user's mistake was to forget
the `--` in front of the argument. This can result in a user's intended
argument not being parsed with no indication to the user that something
went wrong. Since git-bugreport presently doesn't take any positionals
at all, let's reject all positionals and give the user a usage hint.
Signed-off-by: Emily Shaffer <nasamuffin@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Feeding "git stash store" with a random commit that was not created
by "git stash create" now errors out.
* jc/fail-stash-to-store-non-stash:
stash: be careful what we store
The description of the `git bisect run` command syntax at the beginning
of the manpage is `git bisect run <cmd>...`, which isn't quite clear
about what `<cmd>` is or what the `...` mean; one could think that it is
the whole (quoted) command line with all arguments in a single string,
or that it supports multiple commands, or that it doesn't accept
commands with arguments at all.
Change to `git bisect run <cmd> [<arg>...]` to clarify the syntax,
in both the manpage and the `git bisect -h` command output.
Additionally, change `--term-{new,bad}` et al to `--term-(new|bad)`
for consistency with the synopsis syntax conventions.
Signed-off-by: Javier Mora <cousteaulecommandant@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As per the CodingGuidelines document, it is recommended that error messages
such as die(), error() and warning(), should start with a lowercase letter
and should not end with a period.
This patch adjusts tests to match updated messages.
Signed-off-by: Isoken June Ibizugbe <isokenjune@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-tree" learned to take strategy backend specific options
via the "-X" option, like "git merge" does.
* ty/merge-tree-strategy-options:
merge: introduce {copy|clear}_merge_options()
merge-tree: add -X strategy option
This moves it right next to parse_opt_empty(), which is a much more
logical place. As a side effect, this removes the need for a forward
declaration of imply_merge().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At least after the successive trimming of enum rebase_type mentioned in
the previous commit, this code did exactly what imply_merge() does, so
just call it instead.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code's evolution left in some bits surrounding enum rebase_type that
don't really make sense any more. In particular, it makes no sense to
invoke imply_merge() if the type is already known not to be
REBASE_APPLY, and it makes no sense to assign the type after calling
imply_merge().
enum rebase_type had more values until commit a74b35081c ("rebase: drop
support for `--preserve-merges`") and commit 10cdb9f38a ("rebase: rename
the two primary rebase backends"). The latter commit also renamed
imply_interactive() to imply_merge().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ignore_non_trailer() returns the _number of bytes_ that should be
ignored from the end of the log message. It does not by itself "ignore"
anything.
Rename this function to remove the leading "ignore" verb, to sound more
like a quantity than an action.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git repack" learned "--max-cruft-size" to prevent cruft packs from
growing without bounds.
* tb/repack-max-cruft-size:
repack: free existing_cruft array after use
builtin/repack.c: avoid making cruft packs preferred
builtin/repack.c: implement support for `--max-cruft-size`
builtin/repack.c: parse `--max-pack-size` with OPT_MAGNITUDE
t7700: split cruft-related tests to t7704
These error messages say "new_index" as if that spelling has some
significance to the end users (e.g. the file "$GIT_DIR/new_index"
has some issues), but that is not the case at all. The i18n folks
were made to include the word literally in the translated messages,
which was not a good idea at all. Spell it "new index", as we are
just telling the users that we failed to create a new index file.
The term is expected to be translated to the end-users' languages,
not left as if it were a literal file name.
This dates all the way back to the first re-implemenation of "git
commit" command in C (the scripted version did not have such wording
in its error messages), in f5bbc322 (Port git commit to C.,
2007-11-08).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As described in the CodingGuidelines document, a single line message
given to die() and its friends should not capitalize its first word,
and should not add full-stop at the end.
Signed-off-by: Naomi Ibe <naomi.ibeh69@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In .gitmodules files, submodules are keyed by their names, and the
path to the submodule whose name is $name is specified by the
submodule.$name.path variable. There were a few codepaths that
mixed the name and path up when consulting the submodule database,
which have been corrected. It took long for these bugs to be found
as the name of a submodule initially is the same as its path, and
the problem does not surface until it is moved to a different path,
which apparently happens very rarely.
* js/submodule-fix-misuse-of-path-and-name:
t7420: test that we correctly handle renamed submodules
t7419: test that we correctly handle renamed submodules
t7419, t7420: use test_cmp_config instead of grepping .gitmodules
t7419: actually test the branch switching
submodule--helper: return error from set-url when modifying failed
submodule--helper: use submodule_from_path in set-{url,branch}
Leakfix.
* jk/commit-graph-leak-fixes:
commit-graph: clear oidset after finishing write
commit-graph: free write-context base_graph_name during cleanup
commit-graph: free write-context entries before overwriting
commit-graph: free graph struct that was not added to chain
commit-graph: delay base_graph assignment in add_graph_to_chain()
commit-graph: free all elements of graph chain
commit-graph: move slab-clearing to close_commit_graph()
merge: free result of repo_get_merge_bases()
commit-reach: free temporary list in get_octopus_merge_bases()
t6700: mark test as leak-free
Test coverage for trailers has been improved.
* la/trailer-test-and-doc-updates:
trailer doc: <token> is a <key> or <keyAlias>, not both
trailer doc: separator within key suppresses default separator
trailer doc: emphasize the effect of configuration variables
trailer --unfold help: prefer "reformat" over "join"
trailer --parse docs: add explanation for its usefulness
trailer --only-input: prefer "configuration variables" over "rules"
trailer --parse help: expose aliased options
trailer --no-divider help: describe usual "---" meaning
trailer: trailer location is a place, not an action
trailer doc: narrow down scope of --where and related flags
trailer: add tests to check defaulting behavior with --no-* flags
trailer test description: this tests --where=after, not --where=before
trailer tests: make test cases self-contained
Just like OPT_FILENAME() does, "git grep -f <path>" should treat
the <path> relative to the original $cwd by paying attention to the
prefix the command is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash store" is meant to store what "git stash create"
produces, as these two are implementation details of the end-user
facing "git stash save" command. Even though it is clearly
documented as such, users would try silly things like "git stash
store HEAD" to render their stash unusable.
Worse yet, because "git stash drop" does not allow such a stash
entry to be removed, "git stash clear" would be the only way to
recover from such a mishap. Reuse the logic that allows "drop" to
refrain from working on such a stash entry to teach "store" to avoid
storing an object that is not a stash entry in the first place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When mostly the same set of options are to be used to perform
multiple merges, one instance of the merge_options structure may
want to be created and used by copying from the same template
instance. We saw such a use recently in "git merge-tree".
Let's make the pattern official by introducing copy_merge_options()
as a supported way to make a copy of the structure, and also give
clear_merge_options() to release any resources held by a copied
instance. Currently we only make a shallow copy, so the former is a
mere structure assignment while the latter is a no-op, but this may
change in the future as the members of merge_options structure
evolve.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DESCRIPTION's "first form" is actually the 1st, 2nd, 3rd and 5th
form in SYNOPSIS, the "second form" is the 4th one.
Interestingly, this state of affairs was introduced in
97fe725075 (cat-file docs: fix SYNOPSIS and "-h" output, 2021-12-28)
with the claim of "Now the two will match again." ("the two" being
DESCRIPTION and SYNOPSIS)...
The description also suffers from other correctness and clarity issues,
e.g., the "first form" paragraph discusses -p, -s and -t, but leaves out
-e, which is included in the corresponding SYNOPSIS section; the second
paragraph mentions <format>, which doesn't occur in SYNOPSIS at all, and
of the three batch options, really only describes the behavior of
--batch-check. Also the mention of "drivers" seems an implementation
detail not adding much clarity in a short summary (and isn't expanded
upon in the rest of the man page, either).
Rather than trying to maintain one-to-one (or N-to-M) correspondence
between the DESCRIPTION and SYNOPSIS forms, creating duplication and
providing opportunities for error, shorten the former into a concise
summary describing the two general modes of operation: batch and
non-batch, leaving details to the subsequent manual sections.
While here, fix a grammar error in the description of -e and make the
following further minor improvements:
NAME:
shorten ("content or type and size" isn't the whole story; say
"details" and leave the actual details to later sections)
SYNOPSIS and --help:
move the (--textconv | --filters) form before --batch, closer
to the other non-batch forms
Signed-off-by: Štěpán Němec <stepnem@smrk.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allocate an array of packed_git pointers so that we can sort the list
of cruft packs, but we never free the array, causing a small leak. Note
that we don't need to free the packed_git structs themselves; they're
owned by the repository object.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a `--geometric` repack, we make sure that the preferred pack
(if writing a MIDX) is the largest pack that we *didn't* repack. That
has the effect of keeping the preferred pack in sync with the pack
containing a majority of the repository's reachable objects.
But if the repository happens to double in size, we'll repack
everything. Here we don't specify any `--preferred-pack`, and instead
let the MIDX code choose.
In the past, that worked fine, since there would only be one pack to
choose from: the one we just wrote. But it's no longer necessarily the
case that there is one pack to choose from. It's possible that the
repository also has a cruft pack, too.
If the cruft pack happens to come earlier in lexical order (and has an
earlier mtime than any non-cruft pack), we'll pick that pack as
preferred. This makes it impossible to reuse chunks of the reachable
pack verbatim from pack-objects, so is sub-optimal.
Luckily, this is a somewhat rare circumstance to be in, since we would
have to repack the entire repository during a `--geometric` repack, and
the cruft pack would have to sort ahead of the pack we just created.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cruft packs are an alternative mechanism for storing a collection of
unreachable objects whose mtimes are recent enough to avoid being
pruned out of the repository.
When cruft packs were first introduced back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20) and
a7d493833f (builtin/pack-objects.c: --cruft with expiration,
2022-05-20), the recommended workflow consisted of:
- Repacking periodically, either by packing anything loose in the
repository (via `git repack -d`) or producing a geometric sequence
of packs (via `git repack --geometric=<d> -d`).
- Every so often, splitting the repository into two packs, one cruft
to store the unreachable objects, and another non-cruft pack to
store the reachable objects.
Repositories may (out of band with the above) choose periodically to
prune out some unreachable objects which have aged out of the grace
period by generating a pack with `--cruft-expiration=<approxidate>`.
This allowed repositories to maintain relatively few packs on average,
and quarantine unreachable objects together in a cruft pack, avoiding
the pitfalls of holding unreachable objects as loose while they age out
(for more, see some of the details in 3d89a8c118
(Documentation/technical: add cruft-packs.txt, 2022-05-20)).
This all works, but can be costly from an I/O-perspective when
frequently repacking a repository that has many unreachable objects.
This problem is exacerbated when those unreachable objects are rarely
(if every) pruned.
Since there is at most one cruft pack in the above scheme, each time we
update the cruft pack it must be rewritten from scratch. Because much of
the pack is reused, this is a relatively inexpensive operation from a
CPU-perspective, but is very costly in terms of I/O since we end up
rewriting basically the same pack (plus any new unreachable objects that
have entered the repository since the last time a cruft pack was
generated).
At the time, we decided against implementing more robust support for
multiple cruft packs. This patch implements that support which we were
lacking.
Introduce a new option `--max-cruft-size` which allows repositories to
accumulate cruft packs up to a given size, after which point a new
generation of cruft packs can accumulate until it reaches the maximum
size, and so on. To generate a new cruft pack, the process works like
so:
- Sort a list of any existing cruft packs in ascending order of pack
size.
- Starting from the beginning of the list, group cruft packs together
while the accumulated size is smaller than the maximum specified
pack size.
- Combine the objects in these cruft packs together into a new cruft
pack, along with any other unreachable objects which have since
entered the repository.
Once a cruft pack grows beyond the size specified via `--max-cruft-size`
the pack is effectively frozen. This limits the I/O churn up to a
quadratic function of the value specified by the `--max-cruft-size`
option, instead of behaving quadratically in the number of total
unreachable objects.
When pruning unreachable objects, we bypass the new code paths which
combine small cruft packs together, and instead start from scratch,
passing in the appropriate `--max-pack-size` down to `pack-objects`,
putting it in charge of keeping the resulting set of cruft packs sized
correctly.
This may seem like further I/O churn, but in practice it isn't so bad.
We could prune old cruft packs for whom all or most objects are removed,
and then generate a new cruft pack with just the remaining set of
objects. But this additional complexity buys us relatively little,
because most objects end up being pruned anyway, so the I/O churn is
well contained.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repack builtin takes a `--max-pack-size` command-line argument which
it uses to feed into any of the pack-objects children that it may spawn
when generating a new pack.
This option is parsed with OPT_STRING, meaning that we'll accept
anything as input, punting on more fine-grained validation until we get
down into pack-objects.
This is fine, but it's wasteful to spend an entire sub-process just to
figure out that one of its option is bogus. Instead, parse the value of
`--max-pack-size` with OPT_MAGNITUDE in 'git repack', and then pass the
known-good result down to pack-objects.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
set-branch will return an error when setting the config fails so I don't
see why set-url shouldn't. Also skip the sync in this case.
Signed-off-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commands need a path to a submodule but treated it as the name when
modifying the .gitmodules file, leading to confusion when a submodule's
name does not match its path.
Because calling submodule_from_path initializes the submodule cache, we
need to manually trigger a reread before syncing, as the cache is
missing the config change we just made.
Signed-off-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In graph_write() we store commits in an oidset, but never clean it up,
leaking the contents. We should clear it in the cleanup section.
The oidset comes from 6830c36077 (commit-graph.h: replace 'commit_hex'
with 'commits', 2020-04-13), but it was just replacing a string_list
that was also leaked. Curiously, we fixed the leak of some adjacent
variables in commit fa8953cb40 (builtin/commit-graph.c: extract
'read_one_commit()', 2020-05-18), but the oidset wasn't included for
some reason.
In combination with the preceding commits, this lets us mark t5324 as
leak-free.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call repo_get_merge_bases(), which allocates a commit_list, but never
free the result, causing a leak.
The obvious solution is to free it, but we need to look at the contents
of the first item to decide whether to leave the loop. One option is to
free it in both code paths. But since the commit that the list points to
is longer-lived than the list itself, we can just dereference it
immediately, free the list, and then continue with the existing logic.
This is about the same amount of code, but keeps the list management all
in one place.
This lets us mark a number of merge-related test scripts as leak-free.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak
Johannes Schindelin
Patrick Steinhardt
Harmen Stoppels
Junio C Hamano
Rubén Justo
Christian Couder
Ghanshyam Thakkar
Kristoffer Haugsbakk
René Scharfe
Phillip Wood
Taylor Blau
John Cai
Toon Claes
Tamino Bauknecht
Jeff King
Elijah Newren
Jean-Noël Avila
Jiang Xin
Josh Brobst
Antonin Delpeuch
Victoria Dye
Andy Koppe
Simon Ser
Joanna Wang
brian m. carlson
Emily Shaffer
Javier Mora
Isoken June Ibizugbe
Oswald Buddenhagen
Linus Arver
Naomi Ibe
Štěpán Němec
Jan Alexander Steffens (heftig)