1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-05-13 12:16:10 +02:00
Commit Graph

271 Commits

Author SHA1 Message Date
Junio C Hamano 6c6ea3800d Merge branch 'sb/clean'
* sb/clean:
  Teach git clean to use setup_standard_excludes()
  git-clean: Fix error message if clean.requireForce is not set.
  Make git-clean a builtin
2007-11-24 16:31:34 -08:00
Kristian Høgsberg f5bbc3225c Port git commit to C.
This makes git commit a builtin and moves git-commit.sh to
contrib/examples.  This also removes the git-runstatus
helper, which was mostly just a git-status.sh implementation detail.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-22 17:05:02 -08:00
Thomas Harning a00a42ae33 git-merge-ours: make it a builtin.
Except that this fixes a longstanding corner case bug by
tightening the way underlying diff-index command is run, it is
functionally equivalent to the scripted version.

Signed-off-by: Thomas Harning Jr <harningt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-22 14:21:59 -08:00
Shawn Bohrer 113f10f22f Make git-clean a builtin
This replaces git-clean.sh with builtin-clean.c, and moves
git-clean.sh to the examples.

This also introduces a change in behavior when removing directories
explicitly specified as a path.  For example currently:

1. When dir has only untracked files, these two behave differently:

    $ git clean -n dir
    $ git clean -n dir/

the former says "Would not remove dir/", while the latter would say
"Would remove dir/untracked" for all paths under it, but not the
directory itself.

With -d, the former would stop refusing, however since the user
explicitly asked to remove the directory the -d is no longer required.

2. When there are more parameters:

    $ git clean -n dir foo
    $ git clean -n dir/ foo

both cases refuse to remove dir/ unless -d is specified.  Once again
since both cases requested to remove dir the -d is no longer required.

Thanks to Johannes Schindelin for the conversion to using the
parse-options API.

Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-18 19:11:42 -08:00
Daniel Barkalow 8951d7c1f1 Build in ls-remote
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-05 12:25:42 -08:00
Daniel Barkalow 96249c04c0 Build-in send-pack, with an API for other programs to call.
Also marks some more things as const, as needed.

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-02 22:40:44 -07:00
Daniel Barkalow 18f7c51cf9 Build-in peek-remote, using transport infrastructure.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-02 22:40:44 -07:00
Scott R Parish 3d7e2d857a "git" returns 1; "git help" and "git help -a" return 0
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-29 20:51:36 -07:00
Shawn O. Pearce 2e13e5d892 Merge branch 'master' into db/fetch-pack
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic.  Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.

* master: (184 commits)
  Whip post 1.5.3.4 maintenance series into shape.
  Minor usage update in setgitperms.perl
  manual: use 'URL' instead of 'url'.
  manual: add some markup.
  manual: Fix example finding commits referencing given content.
  Fix wording in push definition.
  Fix some typos, punctuation, missing words, minor markup.
  manual: Fix or remove em dashes.
  Add a --dry-run option to git-push.
  Add a --dry-run option to git-send-pack.
  Fix in-place editing functions in convert.c
  instaweb: support for Ruby's WEBrick server
  instaweb: allow for use of auto-generated scripts
  Add 'git-p4 commit' as an alias for 'git-p4 submit'
  hg-to-git speedup through selectable repack intervals
  git-svn: respect Subversion's [auth] section configuration values
  gtksourceview2 support for gitview
  fix contrib/hooks/post-receive-email hooks.recipients error message
  Support cvs via git-shell
  rebase -i: use diff plumbing instead of porcelain
  ...

Conflicts:

	Makefile
	builtin-push.c
	rsh.c
2007-10-16 00:15:25 -04:00
Kristian Høgsberg 6d69b6f6ac Clean up stripspace a bit, use strbuf even more.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-27 00:33:33 -07:00
Daniel Barkalow b888d61c83 Make fetch a builtin
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.

This changes a few small bits of behavior:

branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.

branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.

Also, fetch prints different information to standard out.

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-19 03:22:30 -07:00
Daniel Barkalow 2d4177c01c Make fetch-pack a builtin with an internal API
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-19 03:22:30 -07:00
Daniel Barkalow 30ae764b1e Modularize commit-walker
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).

Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-19 03:22:30 -07:00
Carlos Rica 0e5a7faa3a Make "git reset" a builtin.
This replaces the script "git-reset.sh" with "builtin-reset.c".

A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.

The reset option with paths was implemented by Johannes Schindelin.

Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.

The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:

reset:  --soft  --mixed  --hard  -- <paths>
HEAD       X       X        X        -
index      -       X        X        X
files      -       -        X        -

Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-12 13:25:07 -07:00
Carlos Rica 2ae68fcb78 Make verify-tag a builtin.
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".

Testing relies on the "git tag -v" tests calling this command.

A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.

The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.

Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.

The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.

Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-26 22:51:27 -07:00
Carlos Rica 62e09ce998 Make git tag a builtin.
This replaces the script "git-tag.sh" with "builtin-tag.c".

The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.

There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.

The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.

Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-20 01:27:25 -07:00
Carlos Rica 975e0daf5e Function stripspace now gets a buffer instead file descriptors.
An implementation easier to call from builtins. It is designed
to be used from the upcoming builtin-tag.c and builtin-commit.c,
because both need to remove unwanted spaces from messages.

Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-11 21:17:07 -07:00
Carlos Rica 9690c118fa Fix git-stripspace to process correctly long lines and spaces.
Now the implementation gets more memory to store completely
each line before removing trailing spaces, and does it right
when the last line of the file ends with spaces and no newline
at the end.

Function stripspace needs again to be non-static in order to call
it from "builtin-tag.c" and the upcoming "builtin-commit.c".
A new parameter skip_comments was also added to the stripspace
function to optionally strips every shell #comment from the input,
needed for doing this task on those programs.

Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-26 21:55:55 -07:00
Junio C Hamano 16befb8b7f Even more missing static
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-08 02:54:57 -07:00
Junio C Hamano fcd056a6d2 More missing static
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-08 02:37:19 -07:00
Fernando J. Pereda d63bd9a217 Teach mailsplit about Maildir's
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-24 19:01:56 -07:00
Junio C Hamano d0bfd026a8 Add basic infrastructure to assign attributes to paths
This adds the basic infrastructure to assign attributes to
paths, in a way similar to what the exclusion mechanism does
based on $GIT_DIR/info/exclude and .gitignore files.

An attribute is just a simple string that does not contain any
whitespace.  They can be specified in $GIT_DIR/info/attributes
file, and .gitattributes file in each directory.

Each line in these files defines a pattern matching rule.
Similar to the exclusion mechanism, a later match overrides an
earlier match in the same file, and entries from .gitattributes
file in the same directory takes precedence over the ones from
parent directories.  Lines in $GIT_DIR/info/attributes file are
used as the lowest precedence default rules.

A line is either a comment (an empty line, or a line that begins
with a '#'), or a rule, which is a whitespace separated list of
tokens.  The first token on the line is a shell glob pattern.
The rest are names of attributes, each of which can optionally
be prefixed with '!'.  Such a line means "if a path matches this
glob, this attribute is set (or unset -- if the attribute name
is prefixed with '!').  For glob matching, the same "if the
pattern does not have a slash in it, the basename of the path is
matched with fnmatch(3) against the pattern, otherwise, the path
is matched with the pattern with FNM_PATHNAME" rule as the
exclusion mechanism is used.

This does not define what an attribute means.  Tying an
attribute to various effects it has on git operation for paths
that have it will be specified separately.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-14 08:57:06 -07:00
James Bowes 6757ada403 Make gc a builtin.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-17 00:34:19 -07:00
Junio C Hamano c1f5086e23 Merge branch 'jc/fetch'
* jc/fetch:
  .gitignore: add git-fetch--tool
  builtin-fetch--tool: fix reflog notes.
  git-fetch: retire update-local-ref which is not used anymore.
  builtin-fetch--tool: make sure not to overstep ls-remote-result buffer.
  fetch--tool: fix uninitialized buffer when reading from stdin
  builtin-fetch--tool: adjust to updated sha1_object_info().
  git-fetch--tool takes flags before the subcommand.
  Use stdin reflist passing in git-fetch.sh
  Use stdin reflist passing in parse-remote
  Allow fetch--tool to read from stdin
  git-fetch: rewrite expand_ref_wildcard in C
  git-fetch: rewrite another shell loop in C
  git-fetch: move more code into C.
  git-fetch--tool: start rewriting parts of git-fetch in C.
  git-fetch: split fetch_main into fetch_dumb and fetch_native
2007-03-14 01:40:19 -07:00
Johannes Schindelin 9509af686b Make git-revert & git-cherry-pick a builtin
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-03 22:59:34 -08:00
Junio C Hamano 77b50ab009 Merge branch 'js/bundle'
* js/bundle:
  bundle: reword missing prerequisite error message
  git-bundle: record commit summary in the prerequisite data
  git-bundle: fix 'create --all'
  git-bundle: avoid fork() in verify_bundle()
  git-bundle: assorted fixes
  Add git-bundle: move objects and references by archive
2007-02-28 14:38:36 -08:00
Junio C Hamano 88459358cd Merge branch 'np/types' into jc/fetch
* np/types: (253 commits)
  get rid of lookup_object_type()
  convert object type handling from a string to a number
  formalize typename(), and add its reverse type_from_string()
  sha1_file.c: don't ignore an error condition in sha1_loose_object_info()
  sha1_file.c: cleanup "offset" usage
  sha1_file.c: cleanup hdr usage
  git-apply: do not fix whitespaces on context lines.
  diff --cc: integer overflow given a 2GB-or-larger file
  mailinfo: do not get confused with logical lines that are too long.
  Documentation: link in 1.5.0.2 material to the top documentation page.
  Documentation: document remote.<name>.tagopt
  GIT 1.5.0.2
  git-remote: support remotes with a dot in the name
  Documentation: describe "-f/-t/-m" options to "git-remote add"
  diff --cc: fix display of symlink conflicts during a merge.
  merge-recursive: fix longstanding bug in merging symlinks
  merge-index: fix longstanding bug in merging symlinks
  diff --cached: give more sensible error message when HEAD is yet to be created.
  Update tests to use test-chmtime
  Add test-chmtime: a utility to change mtime on files
  ...
2007-02-27 02:27:26 -08:00
Johannes Schindelin 2e0afafebd Add git-bundle: move objects and references by archive
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.

git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.

The original patch was done by Mark Levedahl <mdl123@verizon.net>.

It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-22 22:30:33 -08:00
Junio C Hamano d4289fff87 git-fetch--tool: start rewriting parts of git-fetch in C.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-13 21:43:52 -08:00
Junio C Hamano 4a164d48df Merge branch 'jc/merge-base' (early part)
This contains an evil merge to fast-import, in order to
resolve in_merge_bases() update.
2007-02-13 16:54:35 -08:00
Junio C Hamano 4cc41a16c1 Remove git-diff-stages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-12 19:33:03 -08:00
Linus Torvalds cf39f54efc git reflog show
It makes "git reflog [show]" act as

	git log -g --pretty=oneline --abbrev-cmit

and is fairly straightforward. So you can just write

	git reflog

or

	git reflog show

and it will show you the reflog in a nice format.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-08 15:35:24 -08:00
Mark Wooding b4dfefe00f Make fsck and fsck-objects be builtins.
The earlier change df391b192 to rename fsck-objects to fsck broke
fsck-objects.  This should fix it again.

Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-29 09:36:21 -08:00
Tom Prince e0d10e1c63 [PATCH] Rename git-repo-config to git-config.
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28 16:16:53 -08:00
Shawn O. Pearce 9a0eaf83ea Make git-describe a builtin.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-10 08:27:01 -08:00
Junio C Hamano 71dfbf224f Make merge-base a built-in.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-09 17:57:03 -08:00
Junio C Hamano e8b4029f99 Merge branch 'jc/fsck-reflog'
* jc/fsck-reflog:
  Add git-reflog to .gitignore
  reflog expire: do not punt on tags that point at non commits.
  reflog expire: prune commits that are not incomplete
  Don't crash during repack of a reflog with pruned commits.
  git reflog expire
  Move in_merge_bases() to commit.c
  reflog: fix warning message.
  Teach git-repack to preserve objects referred to by reflog entries.
  Protect commits recorded in reflog from pruning.
  add for_each_reflog_ent() iterator
2006-12-26 23:47:40 -08:00
Johannes Schindelin 658f365027 Make git-rerere a builtin
The perl version used modules which are non-standard in some setups.
This patch brings the full power of rerere to a wider audience.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-21 23:10:14 -08:00
Junio C Hamano 4264dc15e1 git reflog expire
This prepares a place to collect reflog management subcommands,
and implements "expire" action.

	$ git reflog expire --dry-run \
		--expire=4.weeks \
		--expire-unreachable=1.week \
		refs/heads/master

The expiration uses two timestamps: --expire and --expire-unreachable.
Entries older than expire time (defaults to 90 days), and entries older
than expire-unreachable time (defaults to 30 days) and records a commit
that has been rewound and made unreachable from the current tip of the
ref are removed from the reflog.

The parameter handling is still rough, but I think the
core logic for expiration is already sound.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-20 17:22:10 -08:00
Johannes Schindelin ba1f5f3537 Add builtin merge-file, a minimal replacement for RCS merge
merge-file has the same syntax as RCS merge, but supports only the
"-L" option.

For good measure, a test is added, which is quite minimal, though.

[jc: further fix for compliation errors included.]

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-06 10:00:24 -08:00
Johannes Schindelin b8ec59234b Build in shortlog
[jc: with minimum squelching of compiler warning under "-pedantic"
 compilation options.]

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-19 22:59:05 -08:00
Junio C Hamano acca687fa9 git-pickaxe: retire pickaxe
Just make it take over blame's place.  Documentation and command
have all stopped mentioning "git-pickaxe".  The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-08 18:49:37 -08:00
Junio C Hamano 24ad8e0ce2 Merge branch 'jc/pickaxe' 2006-11-07 16:33:59 -08:00
Junio C Hamano 56532fa147 Merge branch 'rs/cherry'
* rs/cherry:
  Make git-cherry handle root trees
  Built-in cherry
2006-11-01 09:17:37 -08:00
Junio C Hamano 58a1e0e83b Merge branch 'lj/refs'
* lj/refs: (63 commits)
  Fix show-ref usagestring
  t3200: git-branch testsuite update
  sha1_name.c: avoid compilation warnings.
  Make git-branch a builtin
  ref-log: fix D/F conflict coming from deleted refs.
  git-revert with conflicts to behave as git-merge with conflicts
  core.logallrefupdates thinko-fix
  git-pack-refs --all
  core.logallrefupdates create new log file only for branch heads.
  Remove bashism from t3210-pack-refs.sh
  ref-log: allow ref@{count} syntax.
  pack-refs: call fflush before fsync.
  pack-refs: use lockfile as everybody else does.
  git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
  lock_ref_sha1_basic does not remove empty directories on BSD
  Do not create tag leading directories since git update-ref does it.
  Check that a tag exists using show-ref instead of looking for the ref file.
  Use git-update-ref to delete a tag instead of rm()ing the ref file.
  Fix refs.c;:repack_without_ref() clean-up path
  Clean up "git-branch.sh" and add remove recursive dir test cases.
  ...
2006-11-01 08:48:50 -08:00
Junio C Hamano 9ee93dceb5 Merge for-each-ref to sync gitweb fully with 'next' 2006-10-25 13:29:12 -07:00
Junio C Hamano 8e95026f29 Merge branch 'jc/web-blame'
* jc/web-blame:
  gitweb: spell "blame --porcelain" with -p
  blame: Document and add help text for -f, -n, and -p
  gitweb: blame porcelain: lineno and orig lineno swapped
  Remove git-annotate.perl and create a builtin-alias for git-blame
  gitweb: use blame --porcelain
  git-blame --porcelain
  blame.c: move code to output metainfo into a separate function.
  git-blame: --show-number (and -n)
  git-blame: --show-name (and -f)
  blame.c: whitespace and formatting clean-up.
  Gitweb - provide site headers and footers
  gitweb: blame: Mouse-over commit-8 shows author and date
  gitweb: blame: print commit-8 on the leading row of a commit-block
  Revert 954a618375
  gitweb: prepare for repositories with packed refs.
  gitweb: make leftmost column of blame less cluttered.
2006-10-25 13:18:06 -07:00
Lars Hjemli c31820c26b Make git-branch a builtin
This replaces git-branch.sh with builtin-branch.c

The changes is basically a patch from Kristian Høgsberg, updated
to apply onto current 'next'

Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-23 20:43:49 -07:00
Rene Scharfe e827633a5d Built-in cherry
This replaces the shell script git-cherry with a version written in C.

The behaviour of the new version differs from the original in two
points: it has no long help any more, and it is handling the (optional)
third parameter a bit differently.  Basically, it does the equivalent
of

   ours=`git-rev-list $ours ^$limit ^$upstream`

instead of

   ours=`git-rev-list $ours ^$limit`

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-23 20:25:32 -07:00
J. Bruce Fields 2eb53e65bd Make prune also run prune-packed
Both the git-prune manpage and everday.txt say that git-prune should also prune
unpacked objects that are also found in packs, by running git prune-packed.

Junio thought this was "a regression when prune was rewritten as a built-in."

So modify prune to call prune-packed again.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2006-10-22 16:39:58 -07:00
Junio C Hamano cee7f245dc git-pickaxe: blame rewritten.
Currently it does what git-blame does, but only faster.

More importantly, its internal structure is designed to support
content movement (aka cut-and-paste) more easily by allowing
more than one paths to be taken from the same commit.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-19 22:42:49 -07:00
Ryan Anderson f789e34746 Remove git-annotate.perl and create a builtin-alias for git-blame
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-09 20:25:28 -07:00
Junio C Hamano 2958d9b5db Merge branch 'master' into lj/refs
* master: (72 commits)
  runstatus: do not recurse into subdirectories if not needed
  grep: fix --fixed-strings combined with expression.
  grep: free expressions and patterns when done.
  Corrected copy-and-paste thinko in ignore executable bit test case.
  An illustration of rev-list --parents --pretty=raw
  Allow git-checkout when on a non-existant branch.
  gitweb: Decode long title for link tooltips
  git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
  Ignore executable bit when adding files if filemode=0.
  Remove empty ref directories that prevent creating a ref.
  Use const for interpolate arguments
  git-archive: update documentation
  Deprecate merge-recursive.py
  gitweb: fix over-eager application of esc_html().
  Allow '(no author)' in git-svn's authors file.
  Allow 'svn fetch' on '(no date)' revisions in Subversion.
  git-repack: allow git-repack to run in subdirectory
  Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
  git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
  git-tar-tree: Remove duplicate git_config() call
  ...
2006-09-27 22:23:12 -07:00
Junio C Hamano e9800b28c2 Merge branch 'jc/lt-ref2-with-lt-refs' into jc/ref-locking
* jc/lt-ref2-with-lt-refs:
  Fix show-ref usage for --dereference.
  Document git-show-ref [-s|--hash] option.
  Add man page for git-show-ref
  gitignore: git-show-ref is a generated file.
  Use Linus' show ref in "git-branch.sh".
  Add [-s|--hash] option to Linus' show-ref.
  Teach "git checkout" to use git-show-ref
  Add "git show-ref" builtin command
2006-09-27 00:53:29 -07:00
Rene Scharfe 31756c5da8 Remove git-zip-tree
git-zip-tree can be safely removed because it was never part of a formal
release.  This patch makes 'git-archive --format=zip' the one and only git
ZIP file creation command.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-23 14:00:27 -07:00
Junio C Hamano eaf12a8c7d Merge branch 'lt/refs' into jc/lt-ref2-with-lt-refs
* lt/refs: (58 commits)
  git-pack-refs --prune
  pack-refs: do not pack symbolic refs.
  Tell between packed, unpacked and symbolic refs.
  Add callback data to for_each_ref() family.
  symbolit-ref: fix resolve_ref conversion.
  Fix broken sha1 locking
  fsck-objects: adjust to resolve_ref() clean-up.
  gitignore: git-pack-refs is a generated file.
  wt-status: use simplified resolve_ref to find current branch
  Fix t1400-update-ref test minimally
  Enable the packed refs file format
  Make ref resolution saner
  Add support for negative refs
  Start handling references internally as a sorted in-memory list
  gitweb fix validating pg (page) parameter
  git-repack(1): document --window and --depth
  git-apply(1): document --unidiff-zero
  gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
  upload-archive: monitor child communication even more carefully.
  gitweb: export options
  ...
2006-09-21 00:40:28 -07:00
Junio C Hamano 340adb8bcc Merge branch 'lt/refs' into jc/for-each-ref-with-lt-refs
* lt/refs: (58 commits)
  git-pack-refs --prune
  pack-refs: do not pack symbolic refs.
  Tell between packed, unpacked and symbolic refs.
  Add callback data to for_each_ref() family.
  symbolit-ref: fix resolve_ref conversion.
  Fix broken sha1 locking
  fsck-objects: adjust to resolve_ref() clean-up.
  gitignore: git-pack-refs is a generated file.
  wt-status: use simplified resolve_ref to find current branch
  Fix t1400-update-ref test minimally
  Enable the packed refs file format
  Make ref resolution saner
  Add support for negative refs
  Start handling references internally as a sorted in-memory list
  gitweb fix validating pg (page) parameter
  git-repack(1): document --window and --depth
  git-apply(1): document --unidiff-zero
  gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
  upload-archive: monitor child communication even more carefully.
  gitweb: export options
  ...
2006-09-21 00:29:37 -07:00
Linus Torvalds e1e22e37f4 Start handling references internally as a sorted in-memory list
This also adds some very rudimentary support for the notion of packed
refs.  HOWEVER! At this point it isn't used to actually look up a ref
yet, only for listing them (ie "for_each_ref()" and friends see the
packed refs, but none of the other single-ref lookup routines).

Note how we keep two separate lists: one for the loose refs, and one for
the packed refs we read. That's so that we can easily keep the two apart,
and read only one set or the other (and still always make sure that the
loose refs take precedence).

[ From this, it's not actually obvious why we'd keep the two separate
  lists, but it's important to have the packed refs on their own list
  later on, when I add support for looking up a single loose one.

  For that case, we will want to read _just_ the packed refs in case the
  single-ref lookup fails, yet we may end up needing the other list at
  some point in the future, so keeping them separated is important ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-17 19:09:11 -07:00
Junio C Hamano b467fb0b90 Merge branch 'jk/diff'
* jk/diff:
  wt-status: remove extraneous newline from 'deleted:' output
  git-status: document colorization config options
  Teach runstatus about --untracked
  git-commit.sh: convert run_status to a C builtin
  Move color option parsing out of diff.c and into color.[ch]
  diff: support custom callbacks for output
2006-09-17 18:14:03 -07:00
Junio C Hamano 4d69065d3a Merge branch 'jc/archive'
* jc/archive:
  git-tar-tree: devolve git-tar-tree into a wrapper for git-archive
  git-archive: inline default_parse_extra()
  builtin-archive.c: rename remote_request() to extract_remote_arg()
  upload-archive: monitor child communication more carefully.
  Add sideband status report to git-archive protocol
  Prepare larger packet buffer for upload-pack protocol.
  Teach --exec to git-archive --remote
  Add --verbose to git-archive
  archive: force line buffered output to stderr
  Use xstrdup instead of strdup in builtin-{tar,zip}-tree.c
  Move sideband server side support into reusable form.
  Move sideband client side support into reusable form.
  archive: allow remote to have more formats than we understand.
  git-archive: make compression level of ZIP archives configurable
  Add git-upload-archive
  git-archive: wire up ZIP format.
  git-archive: wire up TAR format.
  Add git-archive
2006-09-17 02:46:00 -07:00
Junio C Hamano 9f613ddd21 Add git-for-each-ref: helper for language bindings
This adds a new command, git-for-each-ref.  You can have it iterate
over refs and have it output various aspects of the objects they
refer to.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 10:22:02 -07:00
Linus Torvalds 358ddb62cf Add "git show-ref" builtin command
It's kind of like "git peek-remote", but works only locally (and thus
avoids the whole overhead of git_connect()) and has some extra
verification features.

For example, it allows you to filter the results, and to choose whether
you want the tag dereferencing or not. You can also use it to just test
whether a particular ref exists.

For example:

	git show-ref master

will show all references called "master", whether tags or heads or
anything else, and regardless of how deep in the reference naming
hierarchy they are (so it would show "refs/heads/master" but also
"refs/remote/other-repo/master").

When using the "--verify" flag, the command requires an exact ref path:

	git show-ref --verify refs/heads/master

will only match the exact branch called "master".

If nothing matches, show-ref will return an error code of 1, and in the
case of verification, it will show an error message.

For scripting, you can ask it to be quiet with the "--quiet" flag, which
allows you to do things like

	git-show-ref --quiet --verify -- "refs/heads/$headname" ||
		echo "$headname is not a valid branch"

to check whether a particular branch exists or not (notice how we don't
actually want to show any results, and we want to use the full refname for
it in order to not trigger the problem with ambiguous partial matches).

To show only tags, or only proper branch heads, use "--tags" and/or
"--heads" respectively (using both means that it shows tags _and_ heads,
but not other random references under the refs/ subdirectory).

To do automatic tag object dereferencing, use the "-d" or "--dereference"
flag, so you can do

	git show-ref --tags --dereference

to get a listing of all tags together with what they dereference.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 02:23:51 -07:00
Junio C Hamano d0c2449f78 Define fallback PATH_MAX on systems that do not define one in <limits.h>
Notably on GNU/Hurd, as reported by Gerrit Pape.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-15 22:47:21 -07:00
Franck Bui-Huu 39345a216f Add git-upload-archive
This command implements the git archive protocol on the server
side. This command is not intended to be used by the end user.
Underlying git-archive command line options are sent over the
protocol from "git-archive --remote=...", just like upload-tar
currently does with "git-tar-tree=...".

As for "git-archive" command implementation, this new command
does not execute any existing "git-{tar,zip}-tree" but rely
on the archive API defined by "git-archive" patch. Hence we
get 2 good points:

 - "git-archive" and "git-upload-archive" share all option
   parsing code.

 - All kind of git-upload-{tar,zip} can be deprecated.

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-09 11:57:37 -07:00
Franck Bui-Huu 4df096a5ca Add git-archive
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.

Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.

 - The first one is used to parse 'extra' parameters which have
   signification only for the specific archiver. That would allow
   different archive backends to have different kind of options.

 - The second one is used to ask to an archive backend to build
   the archive given some already resolved parameters.

The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?

It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.

The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:

$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD

We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-09 11:57:36 -07:00
Jeff King c91f0d92ef git-commit.sh: convert run_status to a C builtin
This creates a new git-runstatus which should do roughly the same thing
as the run_status function from git-commit.sh. Except for color support,
the main focus has been to keep the output identical, so that it can be
verified as correct and then used as a C platform for other improvements to
the status printing code.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-08 16:46:35 -07:00
Rene Scharfe e4fbbfe9ec Add git-zip-tree
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.

git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees.  It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.

There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.

[jc: with a minor typefix to avoid void* arithmetic]

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-26 18:27:35 -07:00
Rene Scharfe 2e3ed670eb git-verify-pack: make builtin
Convert git-verify-pack to a builtin command.  Also rename ac to argc
and av to argv for consistancy.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-10 14:19:06 -07:00
Junio C Hamano f754fa9c54 builtins: Makefile clean-up
This cleans up the build procedure for built-in commands by:

 - generating mostly redundant definition of BUILT_INS from
   BUILTIN_OBJS in the Makefile,
 - renaming a few files to make the above possible, and
 - sorting the built-in command table in git.c.

It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-04 01:51:04 -07:00
Junio C Hamano e414156ab6 Make git-checkout-index a builtin
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-04 01:23:19 -07:00
Matthias Kestenholz 640ce1052b Make git-symbolic-ref a builtin
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-03 23:15:11 -07:00
Matthias Kestenholz 6441363079 Make git-unpack-objects a builtin
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-03 23:15:11 -07:00
Matthias Kestenholz 5d4a600335 Make git-pack-objects a builtin
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-03 23:15:11 -07:00
Matthias Kestenholz d6b64ed0f3 Make git-name-rev a builtin
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-03 23:15:11 -07:00
Matthias Kestenholz e12c095aa6 Make git-repo-config a builtin
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02 17:05:14 -07:00
Matthias Kestenholz 53bb2c002a Make git-prune-packed a builtin
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02 11:36:01 -07:00
Ramsay Allan Jones 822a7d5071 Remove cmd_usage() routine and re-organize the help/usage code.
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.

[jc: this incidentally revealed that t9100 test assumed that the output
 from "git help" to be fixed in stone, but this patch lower-cases
 "Usage" to "usage".  Update the test not to rely on "git help" output.]

Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02 00:27:18 -07:00
Ramsay Allan Jones 8e76483ce0 Fix header breakage due to redefining PATH_MAX.
The header builtin.h was, incorrectly, redefining PATH_MAX which
causes a header order dependency in builtin-write-tree.c.  The fix
is to simply include <limits.h> directly to obtain the correct
definition of PATH_MAX.

Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02 00:27:18 -07:00
Junio C Hamano 7061cf0f20 Merge branch 'lt/setup' into __/setup-n-mv
This merges the new built-in calling convention code into Johannes's
builtin-mv topic in order to resolve their conflicts early on.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-29 01:54:54 -07:00
Linus Torvalds a633fca0c0 Call setup_git_directory() much earlier
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-29 01:34:07 -07:00
Johannes Schindelin 11be42a476 Make git-mv a builtin
This also moves add_file_to_index() to read-cache.c. Oh, and while
touching builtin-add.c, it also removes a duplicate git_config() call.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-26 13:36:36 -07:00
Linus Torvalds ba84a797e7 builtin "git prune"
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).

This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-09 00:57:22 -07:00
Johannes Schindelin 00449f992b Make git-fmt-merge-msg a builtin
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-03 19:42:41 -07:00
Lukas Sandström 854b4629f9 Make git-update-ref a builtin
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18 22:12:20 -07:00
Lukas Sandström fefe81c996 Make git-update-index a builtin
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18 22:12:19 -07:00
Lukas Sandström 7499c99615 Make git-stripspace a builtin
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18 22:12:16 -07:00
Lukas Sandström 34488e3c37 Make git-mailinfo a builtin
[jc: with a bit of constness tightening]

Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18 22:10:28 -07:00
Lukas Sandström e690e84315 Make git-mailsplit a builtin
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18 21:58:20 -07:00
Lukas Sandström 8ed05fb5e9 Make git-write-tree a builtin
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18 21:58:19 -07:00
Rene Scharfe 52ba03cbb1 Built-in git-get-tar-commit-id
By being an internal command git-get-commit-id can make use of
struct ustar_header and other stuff and stops wasting precious
disk space.

Note: I recycled one of the two "tar-tree" entries instead of
splitting that cleanup into a separate patch.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-10 11:14:00 -07:00
Christian Couder 895f10c3b5 Builtin git-rev-parse.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-03 23:45:30 -07:00
Timo Hirvonen f81daefe56 Builtin git-cat-file
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-24 13:35:35 -07:00
Junio C Hamano 73f0a1577b Merge branch 'js/fmt-patch'
This makes "git format-patch" a built-in.

* js/fmt-patch:
  git-rebase: use canonical A..B syntax to format-patch
  git-format-patch: now built-in.
  fmt-patch: Support --attach
  fmt-patch: understand old <his> notation
  Teach fmt-patch about --keep-subject
  Teach fmt-patch about --numbered
  fmt-patch: implement -o <dir>
  fmt-patch: output file names to stdout
  Teach fmt-patch to write individual files.
  Use RFC2822 dates from "git fmt-patch".
  git-fmt-patch: thinkofix to show [PATCH] properly.
  rename internal format-patch wip
  Minor tweak on subject line in --pretty=email
  Tentative built-in format-patch.
2006-05-24 12:19:47 -07:00
Junio C Hamano f2054be4c4 Merge branch 'jc/builtin-n-tar-tree'
This pulls in "make many commands built-in" branches.

* jc/builtin-n-tar-tree:
  built-in tar-tree and remote tar-tree
  Builtin git-diff-files, git-diff-index, git-diff-stages, and git-diff-tree.
  Builtin git-show-branch.
  Builtin git-apply.
  Builtin git-commit-tree.
  Builtin git-read-tree.
  Builtin git-tar-tree.
  Builtin git-ls-tree.
  Builtin git-ls-files.
2006-05-24 11:24:50 -07:00
Junio C Hamano 376bb3a352 Merge branch 'lt/dirwalk'
This makes 'git add' and 'git rm' built-ins.

* lt/dirwalk:
  Add builtin "git rm" command
  Move pathspec matching from builtin-add.c into dir.c
  Prevent bogus paths from being added to the index.
  builtin-add: fix unmatched pathspec warnings.
  Remove old "git-add.sh" remnants
  builtin-add: warn on unmatched pathspecs
  Do "git add" as a builtin
  Clean up git-ls-file directory walking library interface
  libify git-ls-files directory traversal
2006-05-24 11:04:16 -07:00
Junio C Hamano 1af0d11283 Merge branch 'jc/tartree' into jc/builtin-n-tar-tree
* jc/tartree:
  built-in tar-tree and remote tar-tree
2006-05-23 14:44:31 -07:00
Peter Eriksen e8cc9cd98e Builtin git-diff-files, git-diff-index, git-diff-stages, and git-diff-tree.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:13 -07:00
Peter Eriksen 51ce34b992 Builtin git-show-branch.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:13 -07:00
Peter Eriksen ac6245e31a Builtin git-apply.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:13 -07:00
Peter Eriksen 6d96ac18e5 Builtin git-commit-tree.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:12 -07:00
Peter Eriksen d147e501f3 Builtin git-read-tree.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:12 -07:00
Peter Eriksen 56d1398ad3 Builtin git-tar-tree.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:12 -07:00
Peter Eriksen aae01bda7f Builtin git-ls-tree.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:12 -07:00
Peter Eriksen 0864f26421 Builtin git-ls-files.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-23 13:11:12 -07:00
Junio C Hamano 328b710d80 Merge branch 'master' into js/fmt-patch
* master: (119 commits)
  diff family: add --check option
  Document that "git add" only adds non-ignored files.
  Add a conversion tool to migrate remote information into the config
  fetch, pull: ask config for remote information
  Fix build procedure for builtin-init-db
  read-tree -m -u: do not overwrite or remove untracked working tree files.
  apply --cached: do not check newly added file in the working tree
  Implement a --dry-run option to git-quiltimport
  Implement git-quiltimport
  Revert "builtin-grep: workaround for non GNU grep."
  builtin-grep: workaround for non GNU grep.
  builtin-grep: workaround for non GNU grep.
  git-am: use apply --cached
  apply --cached: apply a patch without using working tree.
  apply --numstat: show new name, not old name.
  Documentation/Makefile: create tarballs for the man pages and html files
  Allow pickaxe and diff-filter options to be used by git log.
  Libify the index refresh logic
  Builtin git-init-db
  Remove unnecessary local in get_ref_sha1.
  ...
2006-05-21 01:34:54 -07:00
Junio C Hamano 217542640e built-in tar-tree and remote tar-tree
This makes tar-tree a built-in.  As an added bonus, you can now
say:

	git tar-tree --remote=remote-repository <ent> [<base>]

This does not work with git-daemon yet, but should work with
localhost and git over ssh transports.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 17:48:34 -07:00
Linus Torvalds d9b814cc97 Add builtin "git rm" command
This changes semantics very subtly, because it adds a new atomicity
guarantee.

In particular, if you "git rm" several files, it will now do all or
nothing. The old shell-script really looped over the removed files one by
one, and would basically randomly fail in the middle if "-f" was used and
one of the files didn't exist in the working directory.

This C builtin one will not re-write the index after each remove, but
instead remove all files at once. However, that means that if "-f" is used
(to also force removal of the file from the working directory), and some
files have already been removed from the workspace, it won't stop in the
middle in some half-way state like the old one did.

So what happens is that if the _first_ file fails to be removed with "-f",
we abort the whole "git rm". But once we've started removing, we don't
leave anything half done. If some of the other files don't exist, we'll
just ignore errors of removal from the working tree.

This is only an issue with "-f", of course.

I think the new behaviour is strictly an improvement, but perhaps more
importantly, it is _different_. As a special case, the semantics are
identical for the single-file case (which is the only one our test-suite
seems to test).

The other question is what to do with leading directories. The old "git
rm" script didn't do anything, which is somewhat inconsistent. This one
will actually clean up directories that have become empty as a result of
removing the last file, but maybe we want to have a flag to decide the
behaviour?

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 17:28:33 -07:00
Timo Hirvonen c3c8835fbb Builtin git-init-db
Basically this just renames init-db.c to builtin-init-db.c and makes
some strings const.

Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 15:31:20 -07:00
Lukas Sandström 9370bae2ce Make git-check-format-ref a builtin.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-18 15:51:38 -07:00
Linus Torvalds 5fb61b8dcf Make "git rev-list" be a builtin
This was surprisingly easy. The diff is truly minimal: rename "main()" to
"cmd_rev_list()" in rev-list.c, and rename the whole file to reflect its
new built-in status.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-18 15:46:11 -07:00
Linus Torvalds 0d78153952 Do "git add" as a builtin
First try. Let's see how well this works.

In many ways, the hard parts of "git commit" are not so different from
this, and a builtin commit would share a lot of the code, I think.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:52:40 -07:00
Junio C Hamano efca578eec Merge branch 'jc/grep'
* jc/grep: (22 commits)
  Fix silly typo in new builtin grep
  builtin-grep: unparse more command line options.
  builtin-grep: use external grep when we can take advantage of it
  builtin-grep: -F (--fixed-strings)
  builtin-grep: -w fix
  builtin-grep: typofix
  builtin-grep: tighten argument parsing.
  builtin-grep: documentation
  Teach -f <file> option to builtin-grep.
  builtin-grep: -L (--files-without-match).
  builtin-grep: binary files -a and -I
  builtin-grep: terminate correctly at EOF
  builtin-grep: tighten path wildcard vs tree traversal.
  builtin-grep: support -w (--word-regexp).
  builtin-grep: support -c (--count).
  builtin-grep: allow more than one patterns.
  builtin-grep: allow -<n> and -[ABC]<n> notation for context lines.
  builtin-grep: printf %.*s length is int, not ptrdiff_t.
  builtin-grep: do not use setup_revisions()
  builtin-grep: support '-l' option.
  ...
2006-05-15 18:12:06 -07:00
Junio C Hamano c66b6c067e Merge branch 'master' into js/fmt-patch
* master: (109 commits)
  t1300-repo-config: two new config parsing tests.
  Another config file parsing fix.
  update-index: plug memory leak from prefix_path()
  checkout-index: plug memory leak from prefix_path()
  update-index --unresolve: work from a subdirectory.
  pack-object: squelch eye-candy on non-tty
  core.prefersymlinkrefs: use symlinks for .git/HEAD
  repo-config: trim white-space before comment
  Fix for config file section parsing.
  Clarify git-cherry documentation.
  Update git-unpack-objects documentation.
  Fix up docs where "--" isn't displayed correctly.
  Several trivial documentation touch ups.
  git-svn 1.0.0
  git-svn: documentation updates
  delta: stricter constness
  Makefile: do not link rev-list any specially.
  builtin-push: --all and --tags _are_ explicit refspecs
  builtin-log/whatchanged/show: make them official.
  show-branch: omit uninteresting merges.
  ...
2006-05-06 14:42:59 -07:00
Junio C Hamano 230f544e87 Merge branch 'jc/diff'
* jc/diff:
  builtin-diff: call it "git-diff", really.
  builtin-diff.c: die() formatting type fix.
  built-in diff: assorted updates.
  built-in diff.
2006-05-03 23:54:34 -07:00
Junio C Hamano d820f91871 Merge branch 'jc/count'
* jc/count:
  builtin-count-objects: open packs when running -v
  builtin-count-objects: make it official.
  built-in count-objects.
2006-05-03 23:40:39 -07:00
Junio C Hamano 5010cb5fcc built-in "git grep"
This attempts to set up built-in "git grep" to further reduce
our dependence on the shell, while at the same time optionally
allowing to run grep against object database.  You could do
funky things like these:

	git grep --cached -e pattern	;# grep from index
	git grep -e pattern master	;# or in a rev
	git grep -e pattern master next ;# or in multiple revs
	git grep -e pattern pu^@	;# even like this with an
					;# extension from another topic ;-)
	git grep -e pattern master..next ;# or even from rev ranges
	git grep -e pattern master~20:Documentation
					;# or an arbitrary tree
	git grep -e pattern next:git-commit.sh
        				;# or an arbitrary blob

Right now, it does not understand and/or obey many options grep
should accept, and the pattern must be given with -e option due
to the way the parameter parser is structured, both of which
obviously need to be fixed for usability.

But this is going in the right direction.  The shell script
version is one of the worst Portability offender in the git
barebone Porcelainish; it uses xargs -0 to pass paths around and
shell arrays to sift flags and parameters.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-01 01:26:46 -07:00
Linus Torvalds 755225de6c git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.

Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.

(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).

And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.

Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 00:59:18 -07:00
Junio C Hamano 65056021f2 built-in diff.
This starts to replace the shell script version of "git diff".

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-28 23:20:52 -07:00
Junio C Hamano c74320872b built-in count-objects.
Also it learned to do -v (verbose) to report:

	- number of loose objects
	- disk occupied by loose objects
	- number of objects in local packs
	- number of loose objects that are also in pack
	- unrecognised garbage in .git/objects/??/.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-27 21:35:27 -07:00
Junio C Hamano 91efcf6065 Merge branch 'master' into jc/fmt-patch
* master:
  Split up builtin commands into separate files from git.c
  git-log produces no output
  fix pack-object buffer size
  mailinfo: decode underscore used in "Q" encoding properly.
  Reintroduce svn pools to solve the memory leak.
  pack-objects: do not stop at object that is "too small"
  git-commit --amend: two fixes.
  get_tree_entry(): make it available from tree-walk
  sha1_name.c: no need to include diff.h; tree-walk.h will do.
  sha1_name.c: prepare to make get_tree_entry() reusable from others.
  get_sha1() shorthands for blob/tree objects
  pre-commit hook: complain about conflict markers.
  git-merge: a bit more readable user guidance.
  diff: move diff.c to diff-lib.c to make room.
  git log: don't do merge diffs by default
  Allow "git repack" users to specify repacking window/depth
  Document git-clone --reference
  Fix filename scaling for binary files
  Fix uninteresting tags in new revision parsing

Conflicts:

    Adjusted the addition of fmt-patch to match the recent split
    from git.c to builtin.log.c.
2006-04-21 13:25:47 -07:00
Linus Torvalds 70827b15bf Split up builtin commands into separate files from git.c
Right now it split it into "builtin-log.c" for log-related commands
("log", "show" and "whatchanged"), and "builtin-help.c" for the
informational commands (usage printing and "help" and "version").

This just makes things easier to read, I find.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-21 13:14:41 -07:00