When the user responds to a prompt given by "git add -p" with an
unsupported command, list of available commands were given, which
was too much if the user knew what they wanted to type but merely
made a typo. Now the user gets a much shorter error message.
* rj/add-p-typo-reaction:
add-patch: response to unknown command
add-patch: do not show UI messages on stderr
When the user gives an unknown command to the "add -p" prompt, the list
of accepted commands with their explanation is given. This is the same
output they get when they say '?'.
However, the unknown command may be due to a user input error rather
than the user not knowing the valid command.
To reduce the likelihood of user confusion and error repetition, instead
of displaying the list of accepted commands, display a short error
message with the unknown command received, as feedback to the user.
Include a reminder about the current command '?' in the new message, to
guide the user if they want help.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to show some UI messages on stderr, and yet doing so
may produce some undesirable results, such as messages appearing in an
unexpected order.
Let's use stdout for all UI messages, and adjusts the tests accordingly.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" and other "interactive hunk selection" UI has learned to
skip showing the hunk immediately after it has already been shown, and
an additional action to explicitly ask to reshow the current hunk.
* rj/add-p-explicit-reshow:
add-patch: do not print hunks repeatedly
add-patch: introduce 'p' in interactive-patch
The interactive-patch is a sequential process where, on each step, we
print one hunk from a patch and then ask the user how to proceed.
There is a possibility of repeating a step, for example if the user
enters a non-applicable option, i.e: "s"
$ git add -p
diff --git a/add-patch.c b/add-patch.c
index 52be1ddb15..8fb75e82e2 100644
--- a/add-patch.c
+++ b/add-patch.c
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]? s
Sorry, cannot split this hunk
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]?
... or an invalid option, i.e: "U"
$ git add -p
diff --git a/add-patch.c b/add-patch.c
index 52be1ddb15..8fb75e82e2 100644
--- a/add-patch.c
+++ b/add-patch.c
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]? U
y - stage this hunk
n - do not stage this hunk
q - quit; do not stage this hunk or any of the remaining ones
a - stage this hunk and all later hunks in the file
d - do not stage this hunk or any of the later hunks in the file
j - leave this hunk undecided, see next undecided hunk
J - leave this hunk undecided, see next hunk
g - select a hunk to go to
/ - search for a hunk matching the given regex
e - manually edit the current hunk
p - print again the current hunk
? - print help
@@ -1394,7 +1394,7 @@ N_("j - leave this hunk undecided, see next undecided hunk\n"
static int patch_update_file(struct add_p_state *s,
struct file_diff *file_diff)
{
- size_t hunk_index = 0;
+ size_t hunk_index = 0, prev_hunk_index = -1;
ssize_t i, undecided_previous, undecided_next;
struct hunk *hunk;
char ch;
(1/4) Stage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]?
Printing the chunk again followed by the question can be confusing as
the user has to pay special attention to notice that the same chunk is
being reconsidered.
It can also be problematic if the chunk is longer than one screen height
because the result of the previous iteration is lost off the screen (the
help guide in the previous example).
To avoid such problems, stop printing the chunk if the iteration does
not advance to a different chunk.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shortly we're going make interactive-patch stop printing automatically
the hunk under certain circumstances.
Let's introduce a new option to allow the user to explicitly request
the printing.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several parts of the code need to identify lines that begin with the
comment character, and do so with a simple byte equality check. As part
of the transition to handling multi-byte characters, we need to match
all of the bytes. For cases where we are looking in a NUL-terminated
string, we can just use starts_with(), which checks all of the
characters in comment_line_str.
Note that we can drop the "line.len" check in wt-status.c's
read_rebase_todolist(). The starts_with() function handles the case of
an empty haystack buffer (it will always return false for a non-empty
prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, we should
use the string variable rather than the historical character variable.
All of the sites adjusted here are just swapping out "%c" for "%s" in
format strings, or strbuf_addch() for strbuf_addstr(). The type system
and printf-attribute give the compiler enough information to make sure
our formats and variable changes all match (especially important for
cases where the format string is defined far away from its use, like
prepare_to_commit() in commit.c).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of our transition to multi-byte comment characters, let's take a
NUL-terminated string pointer for strbuf_commented_addf() rather than a
single character.
All of the callers have to be adjusted, but they can just pass
comment_line_str rather than comment_line_char.
Note that we rely on strbuf_add_commented_lines() under the hood, so
we'll cheat a bit to squeeze our string into a single character (for now
the two are equivalent, and we'll address this TODO in the next patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, (restore, checkout, reset) commands correctly take '@' as a
synonym for 'HEAD'. However, in patch mode different prompts/messages
are given on command line due to patch mode machinery not considering
'@' to be a synonym for 'HEAD' due to literal string comparison with
the word 'HEAD', and therefore assigning patch_mode_($command)_nothead
and triggering reverse mode (-R in diff-index). The NEEDSWORK comment
suggested comparing commit objects to get around this. However, doing
so would also take a non-checked out branch pointing to the same commit
as HEAD, as HEAD. This would cause confusion to the user.
Therefore, after parsing '@', replace it with 'HEAD' as reasonably
early as possible. This also solves another problem of disparity
between 'git checkout HEAD' and 'git checkout @' (latter detaches at
the HEAD commit and the former does not).
Trade-offs:
- Some of the errors would show the revision argument as 'HEAD' when
given '@'. This should be fine, as most users who probably use '@'
would be aware that it is a shortcut for 'HEAD' and most probably
used to use 'HEAD'. There is also relevant documentation in
'gitrevisions' manpage about '@' being the shortcut for 'HEAD'. Also,
the simplicity of the solution far outweighs this cost.
- Consider '@' as a shortcut for 'HEAD' even if 'refs/heads/@' exists
at a different commit. Naming a branch '@' is an obvious foot-gun and
many existing commands already take '@' for 'HEAD' even if
'refs/heads/@' exists at a different commit or does not exist at all
(e.g. 'git log @', 'git push origin @' etc.). Therefore this is an
existing assumption and should not be a problem.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
Move functions that are not about pure string manipulation out of
strbuf.[ch]
* cw/strbuf-cleanup:
strbuf: remove global variable
path: move related function to path
object-name: move related functions to object-name
credential-store: move related functions to credential-store file
abspath: move related functions to abspath
strbuf: clarify dependency
strbuf: clarify API boundary
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files depended upon various
things that oidset included, but had omitted the direct #include for
those headers. Add those now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a library that only interacts with other primitives, strbuf should
not utilize the comment_line_char global variable within its
functions. Therefore, add an additional parameter for functions that use
comment_line_char and refactor callers to pass it in instead.
strbuf_stripspace() removes the skip_comments boolean and checks if
comment_line_char is a non-NUL character to determine whether to skip
comments or not.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h and strbuf.[ch] had editor-related functions. Move these into
editor.[ch].
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards making strbuf.c not depend upon cache.h.
Additional steps will follow in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" while the index is unmerged sometimes failed to parse
the diff output it internally produces and died, which has been
corrected.
* jk/add-p-unmerged-fix:
add-patch: handle "* Unmerged path" lines
When we generate a diff with --cached, unmerged entries have no oid for
their index entry:
$ git diff-index --abbrev --cached HEAD
:100644 000000 f719efd 0000000 U my-conflict
So when we are asked to produce a patch, since we only have one side, we
just emit a special message:
$ git diff-index --cached -p HEAD
* Unmerged path my-conflict
This confuses interactive-patch modes that look at cached diffs. For
example:
$ git reset -p
BUG: add-patch.c:498: diff starts with unexpected line:
* Unmerged path my-conflict
Making things even more confusing, you'll get that error only if the
unmerged entry is alphabetically the first changed file. Otherwise, we
simply stick the unrecognized line to the end of the previous hunk.
There it's mostly harmless, as it eventually gets fed back to "git
apply", which happily ignores it. But it's still shown to the user
attached to the hunk, which is wrong.
So let's handle these lines as a noop. There's not really anything
useful to do with a conflicted merge in this case, and that's what we do
for other cases like "add -p". There we get a "diff --cc" line, which we
accept as starting a new file, but we refuse to use any of its hunks
(their headers start with "@@@" and not "@@ ", so we silently ignore
them).
It seems like simply recognizing the line and continuing in our parsing
loop would work. But we actually need to run the rest of the loop body
to handle matching up our colored/filtered output. But that code assumes
that we have some active file_diff we're working on. So instead, we'll
just insert a dummy entry into our array. This ends up the same as if we
saw a "diff --cc" line (a file with no hunks).
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discard_index() function has not returned non-zero since
7a51ed66f6 (Make on-disk index representation separate from in-core
one, 2008-01-14), but we've had various code in-tree still acting as
though that might be the case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cee6cb7300 (built-in add -p: implement the "worktree" patch modes,
2019-12-21) added the worktree patch modes to the built-in add -p.
Its commit message claims to be a port of 2f0896ec3a (restore:
support --patch, 2019-04-25), which did the same for the script
git-add--interactive.perl.
The script mentioned only the worktree in its prompt messages in
worktree mode, while the built-in mentions the worktree and also the
index, even though the command doesn't actually affect the index.
2c8bd8471a (checkout -p: handle new files correctly, 2020-05-27)
added new prompt messages for addition that also mention the index in
worktree mode in the built-in, but not in the script.
Correct these prompts to state that only the worktree will be affected.
Reported-by: David Plumpton <david.plumpton@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More fixes to "add -p"
* js/builtin-add-p-portability-fix:
t6132(NO_PERL): do not run the scripted `add -p`
t3701: test the built-in `add -i` regardless of NO_PERL
add -p: avoid ambiguous signed/unsigned comparison
Thanks to always running `diff-index` and `diff-files` with the
`--numstat` option (the latter with `--ignore-submodules=dirty`) before
even generating any real diff to parse, the Perl version of `git add -p`
simply ignored dirty submodules and does not even offer them up for
staging.
However, the built-in variant did not use that flag because it tries to
run only one `diff` command, skipping the unneeded
`diff-index`/`diff-files` invocation of the Perl variant and therefore
only faithfully recapitulates what the Perl code does once it _does_
generate and parse the real diff.
This causes a problem when running the built-in `add -p` with
`diff-so-fancy` because that diff colorizer always inserts an empty line
before the diff header to ensure that it produces 4 lines as expected by
`git add -p` (the equivalent of the non-colorized `diff`, `index`, `---`
and `+++` lines). But `git diff-files` does not produce any `index` line
for dirty submodules.
The underlying problem is not even the discrepancy in lines, but that
`git add -p` presents diffs for dirty submodules: there is nothing that
_can_ be staged for those.
Let's fix that bug, and teach the built-in `add -p` to ignore dirty
submodules, too. This _incidentally_ also fixes the `diff-so-fancy`
problem ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In
https://lore.kernel.org/git/ecf6f5be-22ca-299f-a8f1-bda38e5ca246@gmail.com,
Phillipe Blain reported that the built-in `git add -p` command fails
when asked to use [`diff-so-fancy`][diff-so-fancy] to colorize the diff.
The reason is that this tool produces colored diffs with a hunk header
that does not contain any parseable `@@ ... @@` line range information,
and therefore we cannot detect any part in that header that comes after
the line range.
As proposed by Phillip Wood, let's take that for a clear indicator that
we should show the hunk headers verbatim. This is what the Perl version
of the interactive `add` command did, too.
[diff-so-fancy]: https://github.com/so-fancy/diff-so-fancy
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the colored version of a diff, the interactive `add`
command really relies on the colored version having the same number of
lines as the plain (uncolored) version. That is an invariant.
We already have code to verify correctly when the colored diff has less
lines than the plain diff. Modulo an off-by-one bug: If the last diff
line has no matching colored one, the code pretends to succeed, still.
To make matters worse, when we adjusted the test in 1e4ffc765d (t3701:
adjust difffilter test, 2020-01-14), we did not catch this because `add
-p` fails for a _different_ reason: it does not find any colored hunk
header that contains a parseable line range.
If we change the test case so that the line range _can_ be parsed, the
bug is exposed.
Let's address all of the above by
- fixing the off-by-one,
- adjusting the test case to allow `add -p` to parse the line range
- making the test case more stringent by verifying that the expected
error message is shown
Also adjust a misleading code comment about the now-fixed code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the interactive `add` operation, users can choose to jump to specific
hunks, and Git will present the hunk list in that case. To avoid showing
too many lines at once, only a maximum of 21 hunks are shown, skipping
the "mode change" pseudo hunk.
The comparison performed to skip the "mode change" pseudo hunk (if any)
compares a signed integer `i` to the unsigned value `mode_change` (which
can be 0 or 1 because it is a 1-bit type).
According to section 6.3.1.8 of the C99 standard (see e.g.
https://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf), what should
happen is an automatic conversion of the "lesser" type to the "greater"
type, but since the types differ in signedness, it is ill-defined what
is the correct "usual arithmetic conversion".
Which means that Visual C's behavior can (and does) differ from GCC's:
When compiling Git using the latter, `add -p`'s `goto` command shows no
hunks by default because it casts a negative start offset to a pretty
large unsigned value, breaking the "goto hunk" test case in
`t3701-add-interactive.sh`.
Let's avoid that by converting the unsigned bit explicitly to a signed
integer.
Note: This is a long-standing bug in the Visual C build of Git, but it
has never been caught because t3701 is skipped when `NO_PERL` is set,
which is the case in the `vs-test` jobs of Git's CI runs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" rewritten in C regressed hunk splitting in some cases,
which has been corrected.
* pw/add-p-hunk-split-fix:
builtin add -p: fix hunk splitting
t3701: clean up hunk splitting tests
The C reimplementation of "add -p" fails to split the last hunk in a
file if hunk ends with an addition or deletion without any post context
line unless it is the last file to be processed.
To determine whether a hunk can be split a counter is incremented each
time a context line follows an insertion or deletion. If at the end of
the hunk the value of this counter is greater than one then the hunk
can be split into that number of smaller hunks. If the last hunk in a
file ends with an insertion or deletion then there is no following
context line and the counter will not be incremented. This case is
already handled at the end of the loop where counter is incremented if
the last hunk ended with an insertion or deletion. Unfortunately there
is no similar check between files (likely because the perl version
only ever parses one diff at a time). Fix this by checking if the last
hunk ended with an insertion or deletion when we see the diff header
of a new file and extend the existing regression test.
Reproted-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate those run-command API users that assign directly to the "argv"
member to use a strvec_pushv() of "args" instead.
In these cases it did not make sense to further refactor these
callers, e.g. daemon.c could be made to construct the arguments closer
to handle(), but that would require moving the construction from its
cmd_main() and pass "argv" through two intermediate functions.
It would be possible for a change like this to introduce a regression
if we were doing:
cp.argv = argv;
argv[1] = "foo";
And changed the code, as is being done here, to:
strvec_pushv(&cp.args, argv);
argv[1] = "foo";
But as viewing this change with the "-W" flag reveals none of these
functions modify variable that's being pushed afterwards in a way that
would introduce such a logic error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -i" failed to honor custom colors configured to show
patches, which has been corrected.
* js/add-i-color-fix:
add -i: verify in the tests that colors can be overridden
add -p: prefer color.diff.context over color.diff.plain
add -i (Perl version): color header to match the C version
add -i (built-in): use the same indentation as the Perl version
add -p (built-in): do not color the progress indicator separately
add -i (built-in): use correct names to load color.diff.* config
add -i (built-in): prevent the `reset` "color" from being configured
add -i: use `reset_color` consistently
add -p (built-in): imitate `xdl_format_hunk_hdr()` generating hunk headers
add -i (built-in): send error messages to stderr
add -i (built-in): do show an error message for incorrect inputs
The Perl version of this command colors the progress indicator and the
prompt message in one go.
Let's do the same in the built-in version so that the same upcoming test
(which will compare the output of `git add -p` against a known-good
version) will pass both for the Perl version as well as for the built-in
version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already maintain a list of colors in the `add_i_state`, therefore we
should use them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In libxdiff, imitating GNU diff, the hunk headers only show the line
count if it is different from 1. When splitting hunks, the Perl version
of `git add -p` already imitates this. Let's do the same in the built-in
version of said command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -p A...B [-- <path>]" did not work, even though the
same command without "-p" correctly used the merge-base between
commits A and B.
* dl/checkout-p-merge-base:
t2016: add a NEEDSWORK about the PERL prerequisite
add-patch: add NEEDSWORK about comparing commits
Doc: document "A...B" form for <tree-ish> in checkout and switch
builtin/checkout: fix `git checkout -p HEAD...` bug
The two versions of add-patch has special-casing for the literal
revision "HEAD". However, we want to handle other ways of saying "HEAD"
in the same way.[0] Add a NEEDSWORK to the add-patch code that does this
so that it can be addressed later.
[0]: https://lore.kernel.org/git/xmqqsgat7ttf.fsf@gitster.c.googlers.com/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Rubén Justo
Jeff King
Ghanshyam Thakkar
Elijah Newren
Calvin Wan
Ævar Arnfjörð Bjarmason
René Scharfe
Johannes Schindelin
Phillip Wood
Denton Liu