After eff45daab8 ("repository: enable SHA-256 support by default",
2020-07-29), vanilla builds of Git enable the user to run, e.g.,
git init --object-format=sha256
and hack away. This can be a good way to gain experience with the
SHA-256 world, e.g., to find bugs that
GIT_TEST_DEFAULT_HASH=sha256 make test
doesn't spot.
But it really is a separate world: Such SHA-256 repos will live entirely
separate from the (by now fairly large) set of SHA-1 repos. Interacting
across the border is possible in principle, e.g., through "diff + apply"
(or "format-patch + am"), but even that has its limitations: Applying a
SHA-256 diff in a SHA-1 repo works in the simple case, but if you need
to resort to `-3`, you're out of luck.
Similarly, "push + pull" should work, but you really will be operating
mostly offset from the rest of the world. That might be ok by the time
you initialize your repository, and it might be ok for several months
after that, but there might come a day when you're starting to regret
your use of `git init --object-format=sha256` and have dug yourself into
a fairly deep hole.
There are currently topics in flight to document our data formats and
protocols regarding SHA-256 and in some cases (midx and commit-graph),
we're considering adjusting how the file formats indicate which object
format to use.
Wherever `--object-format` is mentioned in our documentation, let's make
it clear that using it with "sha256" is experimental. If we later need
to explain why we can't handle data we generated back in 2020, we can
always point to this paragraph we're adding here.
By "include::"-ing a small blurb, we should be able to be consistent
throughout the documentation and can eventually gradually tone down the
severity of this text. One day, we might even use it to start phasing
out `--object-format=sha1`, but let's not get ahead of ourselves...
There's also `extensions.objectFormat`, but it's only mentioned three
times. Twice where we're adding this new disclaimer and in the third
spot we already have a "do not edit" warning. From there, interested
readers should eventually find this new one that we're adding here.
Because `GIT_DEFAULT_HASH` provides another entry point to this
functionality, document the experimental nature of it too.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
show-index is capable of reading any possible index file whether or not
the index is inside a repository. However, because our index files lack
metadata about the hash algorithm in use, it's not possible to
autodetect the algorithm that a particular index file is using.
In order to allow us to read index files of any algorithm, let's set up
the .git directory gently so that we default to the algorithm for the
current repository, and add an --object-format option to allow users to
override this setting and continue to run show-index outside of a
repository altogether. Let's also document this new option so that
people can find it and use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 32637cdf4a (show-index.c: learn about index v2,
2007-04-09) changed the output format of show-index to
include the object CRC32 but didn't update the
documentation. Let's fix that and generally describe the
output in more detail.
There are a few other fixes here while we're rewording:
- refer to index-pack along with pack-objects, since either
can create .idx files
- use "linkgit:" for referring to other commands
- expand the bit about verify-pack, giving reasons why you
might want this command instead. I almost omitted this
entirely, but referring to verify-pack might help a
reader who is looking for more information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsys text and the usage string of subcommands that read list
of things from the standard input are often shown like this:
git gostak [--distim] < <list-of-doshes>
This is problematic in a number of ways:
* The way to use these commands is more often to feed them the
output from another command, not feed them from a file.
* Manual pages outside Git, commands that operate on the data read
from the standard input, e.g "sort", "grep", "sed", etc., are not
described with such a "< redirection-from-file" in their synopsys
text. Our doing so introduces inconsistency.
* We do not insist on where the output should go, by saying
git gostak [--distim] < <list-of-doshes> > <output>
* As it is our convention to enclose placeholders inside <braket>,
the redirection operator followed by a placeholder filename
becomes very hard to read, both in the documentation and in the
help text.
Let's clean them all up, after making sure that the documentation
clearly describes the modes that take information from the standard
input and what kind of things are expected on the input.
[jc: stole example for fmt-merge-msg from Jonathan]
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds documentation for creating packed archives, inspecting,
validating them, and unpacking them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Martin Ågren
brian m. carlson
Jeff King
Junio C Hamano
Thomas Ackermann
Martin von Zweigbergk
Thomas Rast
Jonathan Nieder
Christian Couder
Dan McGee
Christian Meder
Junio C Hamano
Sergey Vlasov