Merge branch 'cc/sha1-bsearch' into HEAD

* cc/sha1-bsearch: (95 commits)
  patch-ids: use the new generic "sha1_pos" function to lookup sha1
  sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
  Update draft release notes to 1.6.3
  GIT 1.6.2.2
  send-email: ensure quoted addresses are rfc2047 encoded
  send-email: correct two tests which were going interactive
  Documentation: git-svn: fix trunk/fetch svn-remote key typo
  Mailmap: Allow empty email addresses to be mapped
  Cleanup warning about known issues in cvsimport documentation
  Documentation: Remove an odd "instead"
  send-email: ask_default should apply to all emails, not just the first
  send-email: don't attempt to prompt if tty is closed
  fix portability problem with IS_RUN_COMMAND_ERR
  Documentation: use "spurious .sp" XSLT if DOCBOOK_SUPPRESS_SP is set
  mailmap: resurrect lower-casing of email addresses
  builtin-clone.c: no need to strdup for setenv
  builtin-clone.c: make junk_pid static
  git-svn: add a double quiet option to hide git commits
  Update draft release notes to 1.6.2.2
  Documentation: push.default applies to all remotes
  ...

Documentation/Makefile

@@ -41,7 +41,8 @@ man7dir=$(mandir)/man7
 
 ASCIIDOC=asciidoc
 ASCIIDOC_EXTRA =
-MANPAGE_XSL = callouts.xsl
+MANPAGE_XSL = manpage-normal.xsl
+XMLTO_EXTRA =
 INSTALL?=install
 RM ?= rm -f
 DOC_REF = origin/man
@@ -59,12 +60,47 @@ endif
 -include ../config.mak.autogen
 -include ../config.mak
 
+#
+# For asciidoc ...
+#	-7.1.2,	no extra settings are needed.
+#	8.0-,	set ASCIIDOC8.
+#
+
+#
+# For docbook-xsl ...
+#	-1.68.1,	set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+#	1.69.0,		no extra settings are needed?
+#	1.69.1-1.71.0,	set DOCBOOK_SUPPRESS_SP?
+#	1.71.1,		no extra settings are needed?
+#	1.72.0,		set DOCBOOK_XSL_172.
+#	1.73.0-,	set ASCIIDOC_NO_ROFF
+#
+
+#
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+#
+
 ifdef ASCIIDOC8
 ASCIIDOC_EXTRA += -a asciidoc7compatible
 endif
 ifdef DOCBOOK_XSL_172
-ASCIIDOC_EXTRA += -a docbook-xsl-172
+ASCIIDOC_EXTRA += -a git-asciidoc-no-roff
 MANPAGE_XSL = manpage-1.72.xsl
+else
+	ifdef ASCIIDOC_NO_ROFF
+	# docbook-xsl after 1.72 needs the regular XSL, but will not
+	# pass-thru raw roff codes from asciidoc.conf, so turn them off.
+	ASCIIDOC_EXTRA += -a git-asciidoc-no-roff
+	endif
+endif
+ifdef MAN_BOLD_LITERAL
+XMLTO_EXTRA += -m manpage-bold-literal.xsl
+endif
+ifdef DOCBOOK_SUPPRESS_SP
+XMLTO_EXTRA += -m manpage-suppress-sp.xsl
 endif
 
 #
@@ -76,6 +112,32 @@ endif
 # yourself - yes, all 6 characters of it!
 #
 
+QUIET_SUBDIR0  = +$(MAKE) -C # space to separate -C and subdir
+QUIET_SUBDIR1  =
+
+ifneq ($(findstring $(MAKEFLAGS),w),w)
+PRINT_DIR = --no-print-directory
+else # "make -w"
+NO_SUBDIR = :
+endif
+
+ifneq ($(findstring $(MAKEFLAGS),s),s)
+ifndef V
+	QUIET_ASCIIDOC	= @echo '   ' ASCIIDOC $@;
+	QUIET_XMLTO	= @echo '   ' XMLTO $@;
+	QUIET_DB2TEXI	= @echo '   ' DB2TEXI $@;
+	QUIET_MAKEINFO	= @echo '   ' MAKEINFO $@;
+	QUIET_DBLATEX	= @echo '   ' DBLATEX $@;
+	QUIET_XSLTPROC	= @echo '   ' XSLTPROC $@;
+	QUIET_GEN	= @echo '   ' GEN $@;
+	QUIET_STDERR	= 2> /dev/null
+	QUIET_SUBDIR0	= +@subdir=
+	QUIET_SUBDIR1	= ;$(NO_SUBDIR) echo '   ' SUBDIR $$subdir; \
+			  $(MAKE) $(PRINT_DIR) -C $$subdir
+	export V
+endif
+endif
+
 all: html man
 
 html: $(DOC_HTML)
@@ -119,7 +181,7 @@ install-html: html
 	sh ./install-webdoc.sh $(DESTDIR)$(htmldir)
 
 ../GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE
-	$(MAKE) -C ../ GIT-VERSION-FILE
+	$(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) GIT-VERSION-FILE
 
 -include ../GIT-VERSION-FILE
 
@@ -127,8 +189,8 @@ install-html: html
 # Determine "include::" file references in asciidoc files.
 #
 doc.dep : $(wildcard *.txt) build-docdep.perl
-	$(RM) $@+ $@
-	$(PERL_PATH) ./build-docdep.perl >$@+
+	$(QUIET_GEN)$(RM) $@+ $@ && \
+	$(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \
 	mv $@+ $@
 
 -include doc.dep
@@ -146,91 +208,94 @@ cmds_txt = cmds-ancillaryinterrogators.txt \
 $(cmds_txt): cmd-list.made
 
 cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT)
-	$(RM) $@
-	$(PERL_PATH) ./cmd-list.perl ../command-list.txt
+	$(QUIET_GEN)$(RM) $@ && \
+	$(PERL_PATH) ./cmd-list.perl ../command-list.txt $(QUIET_STDERR) && \
 	date >$@
 
 clean:
 	$(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7
-	$(RM) *.texi *.texi+ git.info gitman.info
+	$(RM) *.texi *.texi+ *.texi++ git.info gitman.info
 	$(RM) howto-index.txt howto/*.html doc.dep
 	$(RM) technical/api-*.html technical/api-index.txt
 	$(RM) $(cmds_txt) *.made
 
 $(MAN_HTML): %.html : %.txt
-	$(RM) $@+ $@
+	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
 	$(ASCIIDOC) -b xhtml11 -d manpage -f asciidoc.conf \
-		$(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $<
+		$(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< && \
 	mv $@+ $@
 
 %.1 %.5 %.7 : %.xml
-	$(RM) $@
-	xmlto -m $(MANPAGE_XSL) man $<
+	$(QUIET_XMLTO)$(RM) $@ && \
+	xmlto -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<
 
 %.xml : %.txt
-	$(RM) $@+ $@
+	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
 	$(ASCIIDOC) -b docbook -d manpage -f asciidoc.conf \
-		$(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $<
+		$(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< && \
 	mv $@+ $@
 
 user-manual.xml: user-manual.txt user-manual.conf
-	$(ASCIIDOC) -b docbook -d book $<
+	$(QUIET_ASCIIDOC)$(ASCIIDOC) -b docbook -d book $<
 
 technical/api-index.txt: technical/api-index-skel.txt \
 	technical/api-index.sh $(patsubst %,%.txt,$(API_DOCS))
-	cd technical && sh ./api-index.sh
+	$(QUIET_GEN)cd technical && sh ./api-index.sh
 
 $(patsubst %,%.html,$(API_DOCS) technical/api-index): %.html : %.txt
-	$(ASCIIDOC) -b xhtml11 -f asciidoc.conf \
+	$(QUIET_ASCIIDOC)$(ASCIIDOC) -b xhtml11 -f asciidoc.conf \
 		$(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) $*.txt
 
 XSLT = docbook.xsl
 XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css
 
 user-manual.html: user-manual.xml
-	xsltproc $(XSLTOPTS) -o $@ $(XSLT) $<
+	$(QUIET_XSLTPROC)xsltproc $(XSLTOPTS) -o $@ $(XSLT) $<
 
 git.info: user-manual.texi
-	$(MAKEINFO) --no-split -o $@ user-manual.texi
+	$(QUIET_MAKEINFO)$(MAKEINFO) --no-split -o $@ user-manual.texi
 
 user-manual.texi: user-manual.xml
-	$(RM) $@+ $@
-	$(DOCBOOK2X_TEXI) user-manual.xml --encoding=UTF-8 --to-stdout | \
-		$(PERL_PATH) fix-texi.perl >$@+
+	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
+	$(DOCBOOK2X_TEXI) user-manual.xml --encoding=UTF-8 --to-stdout >$@++ && \
+	$(PERL_PATH) fix-texi.perl <$@++ >$@+ && \
+	rm $@++ && \
 	mv $@+ $@
 
 user-manual.pdf: user-manual.xml
-	$(RM) $@+ $@
-	$(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $<
+	$(QUIET_DBLATEX)$(RM) $@+ $@ && \
+	$(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $< && \
 	mv $@+ $@
 
 gitman.texi: $(MAN_XML) cat-texi.perl
-	$(RM) $@+ $@
+	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
 	($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \
-		--to-stdout $(xml);)) | $(PERL_PATH) cat-texi.perl $@ >$@+
+		--to-stdout $(xml) &&) true) > $@++ && \
+	$(PERL_PATH) cat-texi.perl $@ <$@++ >$@+ && \
+	rm $@++ && \
 	mv $@+ $@
 
 gitman.info: gitman.texi
-	$(MAKEINFO) --no-split --no-validate $*.texi
+	$(QUIET_MAKEINFO)$(MAKEINFO) --no-split --no-validate $*.texi
 
 $(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml
-	$(RM) $@+ $@
-	$(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+
+	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
+	$(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ && \
 	mv $@+ $@
 
 howto-index.txt: howto-index.sh $(wildcard howto/*.txt)
-	$(RM) $@+ $@
-	sh ./howto-index.sh $(wildcard howto/*.txt) >$@+
+	$(QUIET_GEN)$(RM) $@+ $@ && \
+	sh ./howto-index.sh $(wildcard howto/*.txt) >$@+ && \
 	mv $@+ $@
 
 $(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt
-	$(ASCIIDOC) -b xhtml11 $*.txt
+	$(QUIET_ASCIIDOC)$(ASCIIDOC) -b xhtml11 $*.txt
 
 WEBDOC_DEST = /pub/software/scm/git/docs
 
 $(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt
-	$(RM) $@+ $@
-	sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+
+	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+	sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+ && \
 	mv $@+ $@
 
 install-webdoc : html

Documentation/RelNotes-1.6.2.2.txt

@@ -7,9 +7,15 @@ Fixes since v1.6.2.1
 * A longstanding confusing description of what --pickaxe option of
   git-diff does has been clarified in the documentation.
 
+* "git-blame -S" did not quite work near the commits that were given
+  on the command line correctly.
+
 * "git diff --pickaxe-regexp" did not count overlapping matches
   correctly.
 
+* "git diff" did not feed files in work-tree representation to external
+  diff and textconv.
+
 * "git-fetch" in a repository that was not cloned from anywhere said
   it cannot find 'origin', which was hard to understand for new people.
 
@@ -27,9 +33,13 @@ Fixes since v1.6.2.1
 * 'git-submodule add' did not tolerate extra slashes and ./ in the path it
   accepted from the command line; it now is more lenient.
 
+* git-svn misbehaved when the project contained a path that began with
+  two dashes.
 
----
-exec >/var/tmp/1
-O=v1.6.2.1-23-g67c176f
-echo O=$(git describe maint)
-git shortlog --no-merges $O..maint
+* import-zips script (in contrib) did not compute the common directory
+  prefix correctly.
+
+* miscompilation of negated enum constants by old gcc (2.9) affected the
+  codepaths to spawn subprocesses.
+
+Many small documentation updates are included as well.

Documentation/RelNotes-1.6.3.txt

@@ -22,6 +22,13 @@ branch pointed at by its HEAD, gets a large warning.  You can choose what
 should happen upon such a push by setting the configuration variable
 receive.denyDeleteCurrent in the receiving repository.
 
+When the user does not tell "git push" what to push, it has always
+pushed matching refs.  For some people it is unexpected, and a new
+configuration variable push.default has been introduced to allow
+changing a different default behaviour.  To advertise the new feature,
+a big warning is issued if this is not configured and a git push without
+arguments is attempted.
+
 
 Updates since v1.6.2
 --------------------
@@ -39,6 +46,9 @@ Updates since v1.6.2
   repositories.  It may not be useful in practice; meant primarily for
   testing.
 
+* http transport learned to prompt and use password when fetching from or
+  pushing to http://user@host.xz/ URL.
+
 * (msysgit) progress output that is sent over the sideband protocol can
   be handled appropriately in Windows console.
 
@@ -52,6 +62,10 @@ Updates since v1.6.2
   with the 'edit' action in git-add -i/-p, you can abort the editor to
   tell git not to apply it.
 
+* The number of commits shown in "you are ahead/behind your upstream"
+  messages given by "git checkout" and "git status" used to count merge
+  commits; now it doesn't.
+
 * git-archive learned --output=<file> option.
 
 * git-bisect shows not just the number of remaining commits whose goodness
@@ -67,11 +81,17 @@ Updates since v1.6.2
 
 * git-clone runs post-checkout hook when run without --no-checkout.
 
+* git-fast-export choked when seeing a tag that does not point at commit.
+
 * git-format-patch can be told to use attachment with a new configuration,
   format.attach.
 
 * git-format-patch can be told to produce deep or shallow message threads.
 
+* git-format-patch learned format.headers configuration to add extra
+  header fields to the output.  This behaviour is similar to the existing
+  --add-header=<header> option of the command.
+
 * git-grep learned to highlight the found substrings in color.
 
 * git-imap-send learned to work around Thunderbird's inability to easily
@@ -85,6 +105,11 @@ Updates since v1.6.2
 
 * Output from git-remote command has been vastly improved.
 
+* git-repack (invoked from git-gc) did not work as nicely as it should in
+  a repository that borrows objects from neighbours via alternates
+  mechanism especially when some packs are marked with the ".keep" flag
+  to prevent them from being repacked.
+
 * git-send-email learned --confirm option to review the Cc: list before
   sending the messages out.
 
@@ -92,9 +117,18 @@ Updates since v1.6.2
 
 * Test scripts can be run under valgrind.
 
+* Test scripts can be run with installed git.
+
 * Makefile learned 'coverage' option to run the test suites with
   coverage tracking enabled.
 
+* Building the manpages with docbook-xsl between 1.69.1 and 1.71.1 now
+  requires setting DOCBOOK_SUPPRESS_SP to work around a docbook-xsl bug.
+  This workaround used to be enabled by default, but causes problems
+  with newer versions of docbook-xsl.  In addition, there are a few more
+  knobs you can tweak to work around issues with various versions of the
+  docbook-xsl package.  See comments in Documentation/Makefile for details.
+
 Fixes since v1.6.2
 ------------------
 
@@ -104,11 +138,14 @@ release, unless otherwise noted.
 Here are fixes that this release has, but have not been backported to
 v1.6.2.X series.
 
+* The initial checkout did not read the attributes from the .gitattribute
+  file that is being checked out.
+
 * git-gc spent excessive amount of time to decide if an object appears
   in a locally existing pack (if needed, backport by merging 69e020a).
 
 ---
 exec >/var/tmp/1
-O=v1.6.2.1-213-g7d4e3a7
+O=v1.6.2.2-403-g8130949
 echo O=$(git describe master)
 git shortlog --no-merges $O..master ^maint

Documentation/asciidoc.conf

@@ -27,7 +27,7 @@ ifdef::backend-docbook[]
 endif::backend-docbook[]
 
 ifdef::backend-docbook[]
-ifndef::docbook-xsl-172[]
+ifndef::git-asciidoc-no-roff[]
 # "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this.
 # v1.72 breaks with this because it replaces dots not in roff requests.
 [listingblock]
@@ -42,16 +42,16 @@ ifdef::doctype-manpage[]
 endif::doctype-manpage[]
 </literallayout>
 {title#}</example>
-endif::docbook-xsl-172[]
+endif::git-asciidoc-no-roff[]
 
-ifdef::docbook-xsl-172[]
+ifdef::git-asciidoc-no-roff[]
 ifdef::doctype-manpage[]
 # The following two small workarounds insert a simple paragraph after screen
 [listingblock]
 <example><title>{title}</title>
-<screen>
+<literallayout>
 |
-</screen><simpara></simpara>
+</literallayout><simpara></simpara>
 {title#}</example>
 
 [verseblock]
@@ -59,10 +59,11 @@ ifdef::doctype-manpage[]
 {title%}<literallayout{id? id="{id}"}>
 {title#}<literallayout>
 |
-</literallayout><simpara></simpara>
+</literallayout>
 {title#}</para></formalpara>
+{title%}<simpara></simpara>
 endif::doctype-manpage[]
-endif::docbook-xsl-172[]
+endif::git-asciidoc-no-roff[]
 endif::backend-docbook[]
 
 ifdef::doctype-manpage[]

Documentation/callouts.xsl

@@ -1,30 +0,0 @@
-<!-- callout.xsl: converts asciidoc callouts to man page format -->
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
-<xsl:template match="co">
-	<xsl:value-of select="concat('\fB(',substring-after(@id,'-'),')\fR')"/>
-</xsl:template>
-<xsl:template match="calloutlist">
-	<xsl:text>.sp&#10;</xsl:text>
-	<xsl:apply-templates/>
-	<xsl:text>&#10;</xsl:text>
-</xsl:template>
-<xsl:template match="callout">
-	<xsl:value-of select="concat('\fB',substring-after(@arearefs,'-'),'. \fR')"/>
-	<xsl:apply-templates/>
-	<xsl:text>.br&#10;</xsl:text>
-</xsl:template>
-
-<!-- sorry, this is not about callouts, but attempts to work around
- spurious .sp at the tail of the line docbook stylesheets seem to add -->
-<xsl:template match="simpara">
-  <xsl:variable name="content">
-    <xsl:apply-templates/>
-  </xsl:variable>
-  <xsl:value-of select="normalize-space($content)"/>
-  <xsl:if test="not(ancestor::authorblurb) and
-                not(ancestor::personblurb)">
-    <xsl:text>&#10;&#10;</xsl:text>
-  </xsl:if>
-</xsl:template>
-
-</xsl:stylesheet>

Documentation/config.txt

@@ -473,10 +473,14 @@ branch.autosetuprebase::
 	This option defaults to never.
 
 branch.<name>.remote::
-	When in branch <name>, it tells 'git-fetch' which remote to fetch.
-	If this option is not given, 'git-fetch' defaults to remote "origin".
+	When in branch <name>, it tells 'git-fetch' and 'git-push' which
+	remote to fetch from/push to.  It defaults to `origin` if no remote is
+	configured. `origin` is also used if you are not on any branch.
 
 branch.<name>.merge::
+	Defines, together with branch.<name>.remote, the upstream branch
+	for the given branch. It tells 'git-fetch'/'git-pull' which
+	branch to merge from.
 	When in branch <name>, it tells 'git-fetch' the default
 	refspec to be marked for merging in FETCH_HEAD. The value is
 	handled like the remote part of a refspec, and must match a
@@ -1194,6 +1198,19 @@ pull.octopus::
 pull.twohead::
 	The default merge strategy to use when pulling a single branch.
 
+push.default::
+	Defines the action git push should take if no refspec is given
+	on the command line, no refspec is configured in the remote, and
+	no refspec is implied by any of the options given on the command
+	line. Possible values are:
++
+* `nothing` do not push anything.
+* `matching` push all matching branches.
+  All branches having the same name in both ends are considered to be
+  matching. This is the default.
+* `tracking` push the current branch to the branch it is tracking.
+* `current` push the current branch to a branch of the same name.
+
 rebase.stat::
 	Whether to show a diffstat of what changed upstream since the last
 	rebase. False by default.

Documentation/git-bisect.txt

@@ -81,7 +81,7 @@ will have been left with the first bad kernel revision in "refs/bisect/bad".
 Bisect reset
 ~~~~~~~~~~~~
 
-To return to the original head after a bisect session, you issue the
+To return to the original head after a bisect session, issue the
 following command:
 
 ------------------------------------------------
@@ -95,8 +95,8 @@ the bisection state).
 Bisect visualize
 ~~~~~~~~~~~~~~~~
 
-To see the currently remaining suspects in 'gitk', the following command
-is issued during the bisection process:
+To see the currently remaining suspects in 'gitk', issue the following
+command during the bisection process:
 
 ------------
 $ git bisect visualize
@@ -115,7 +115,7 @@ $ git bisect view --stat
 Bisect log and bisect replay
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-After having marked revisions as good or bad, you issue the following
+After having marked revisions as good or bad, issue the following
 command to show what has been done so far:
 
 ------------
@@ -135,7 +135,7 @@ $ git bisect replay that-file
 Avoiding testing a commit
 ~~~~~~~~~~~~~~~~~~~~~~~~~
 
-If in the middle of a bisect session, you know that the next suggested
+If, in the middle of a bisect session, you know that the next suggested
 revision is not a good one to test (e.g. the change the commit
 introduces is known not to work in your environment and you know it
 does not have anything to do with the bug you are chasing), you may
@@ -151,8 +151,8 @@ $ git reset --hard HEAD~3		# try 3 revisions before what
 					# was suggested
 ------------
 
-Then compile and test the chosen revision. Afterwards the revision
-is marked as good or bad in the usual manner.
+Then compile and test the chosen revision, and afterwards mark
+the revision as good or bad in the usual manner.
 
 Bisect skip
 ~~~~~~~~~~~~
@@ -175,8 +175,8 @@ using the "'<commit1>'..'<commit2>'" notation. For example:
 $ git bisect skip v2.5..v2.6
 ------------
 
-The effect of this would be that no commit between `v2.5` excluded and
-`v2.6` included could be tested.
+This tells the bisect process that no commit after `v2.5`, up to and
+including `v2.6`, should be tested.
 
 Note that if you also want to skip the first commit of the range you
 would issue the command:
@@ -185,8 +185,8 @@ would issue the command:
 $ git bisect skip v2.5 v2.5..v2.6
 ------------
 
-This would cause the commits between `v2.5` included and `v2.6` included
-to be skipped.
+This tells the bisect process that the commits between `v2.5` included
+and `v2.6` included should be skipped.
 
 
 Cutting down bisection by giving more parameters to bisect start

Documentation/git-bundle.txt

@@ -19,13 +19,13 @@ DESCRIPTION
 
 Some workflows require that one or more branches of development on one
 machine be replicated on another machine, but the two machines cannot
-be directly connected so the interactive git protocols (git, ssh,
-rsync, http) cannot be used.  This command provides support for
+be directly connected, and therefore the interactive git protocols (git,
+ssh, rsync, http) cannot be used.  This command provides support for
 'git-fetch' and 'git-pull' to operate by packaging objects and references
 in an archive at the originating machine, then importing those into
 another repository using 'git-fetch' and 'git-pull'
 after moving the archive by some means (i.e., by sneakernet).  As no
-direct connection between repositories exists, the user must specify a
+direct connection between the repositories exists, the user must specify a
 basis for the bundle that is held by the destination repository: the
 bundle assumes that all objects in the basis are already in the
 destination repository.
@@ -43,7 +43,7 @@ verify <file>::
        bundle format itself as well as checking that the prerequisite
        commits exist and are fully linked in the current repository.
        'git-bundle' prints a list of missing commits, if any, and exits
-       with non-zero status.
+       with a non-zero status.
 
 list-heads <file>::
        Lists the references defined in the bundle.  If followed by a
@@ -53,14 +53,14 @@ list-heads <file>::
 unbundle <file>::
        Passes the objects in the bundle to 'git-index-pack'
        for storage in the repository, then prints the names of all
-       defined references. If a reflist is given, only references
-       matching those in the given list are printed. This command is
+       defined references. If a list of references is given, only
+       references matching those in the list are printed. This command is
        really plumbing, intended to be called only by 'git-fetch'.
 
 [git-rev-list-args...]::
        A list of arguments, acceptable to 'git-rev-parse' and
-       'git-rev-list', that specify the specific objects and references
-       to transport.  For example, "master~10..master" causes the
+       'git-rev-list', that specifies the specific objects and references
+       to transport.  For example, `master\~10..master` causes the
        current master reference to be packaged along with all objects
        added since its 10th ancestor commit.  There is no explicit
        limit to the number of references and objects that may be
@@ -71,24 +71,24 @@ unbundle <file>::
        A list of references used to limit the references reported as
        available. This is principally of use to 'git-fetch', which
        expects to receive only those references asked for and not
-       necessarily everything in the pack (in this case, 'git-bundle' is
-       acting like 'git-fetch-pack').
+       necessarily everything in the pack (in this case, 'git-bundle' acts
+       like 'git-fetch-pack').
 
 SPECIFYING REFERENCES
 ---------------------
 
 'git-bundle' will only package references that are shown by
 'git-show-ref': this includes heads, tags, and remote heads.  References
-such as master~1 cannot be packaged, but are perfectly suitable for
+such as `master\~1` cannot be packaged, but are perfectly suitable for
 defining the basis.  More than one reference may be packaged, and more
 than one basis can be specified.  The objects packaged are those not
 contained in the union of the given bases.  Each basis can be
-specified explicitly (e.g., ^master~10), or implicitly (e.g.,
-master~10..master, --since=10.days.ago master).
+specified explicitly (e.g. `^master\~10`), or implicitly (e.g.
+`master\~10..master`, `--since=10.days.ago master`).
 
 It is very important that the basis used be held by the destination.
-It is okay to err on the side of conservatism, causing the bundle file
-to contain objects already in the destination as these are ignored
+It is okay to err on the side of caution, causing the bundle file
+to contain objects already in the destination, as these are ignored
 when unpacking at the destination.
 
 EXAMPLE
@@ -97,13 +97,13 @@ EXAMPLE
 Assume you want to transfer the history from a repository R1 on machine A
 to another repository R2 on machine B.
 For whatever reason, direct connection between A and B is not allowed,
-but we can move data from A to B via some mechanism (CD, email, etc).
-We want to update R2 with developments made on branch master in R1.
+but we can move data from A to B via some mechanism (CD, email, etc.).
+We want to update R2 with development made on the branch master in R1.
 
-To bootstrap the process, you can first create a bundle that doesn't have
-any basis. You can use a tag to remember up to what commit you sent out
-in order to make it easy to later update the other repository with
-incremental bundle,
+To bootstrap the process, you can first create a bundle that does not have
+any basis. You can use a tag to remember up to what commit you last
+processed, in order to make it easy to later update the other repository
+with an incremental bundle:
 
 ----------------
 machineA$ cd R1
@@ -111,17 +111,17 @@ machineA$ git bundle create file.bundle master
 machineA$ git tag -f lastR2bundle master
 ----------------
 
-Then you sneakernet file.bundle to the target machine B. Because you don't
-have to have any object to extract objects from such a bundle, not only
-you can fetch/pull from a bundle, you can clone from it as if it was a
-remote repository.
+Then you transfer file.bundle to the target machine B. If you are creating
+the repository on machine B, then you can clone from the bundle as if it
+were a remote repository instead of creating an empty repository and then
+pulling or fetching objects from the bundle:
 
 ----------------
 machineB$ git clone /home/me/tmp/file.bundle R2
 ----------------
 
 This will define a remote called "origin" in the resulting repository that
-lets you fetch and pull from the bundle. $GIT_DIR/config file in R2 may
+lets you fetch and pull from the bundle. The $GIT_DIR/config file in R2 will
 have an entry like this:
 
 ------------------------
@@ -130,12 +130,12 @@ have an entry like this:
     fetch = refs/heads/*:refs/remotes/origin/*
 ------------------------
 
-You can fetch/pull to update the resulting mine.git repository after
-replacing the bundle you store at /home/me/tmp/file.bundle with incremental
-updates from here on.
+To update the resulting mine.git repository, you can fetch or pull after
+replacing the bundle stored at /home/me/tmp/file.bundle with incremental
+updates.
 
-After working more in the original repository, you can create an
-incremental bundle to update the other:
+After working some more in the original repository, you can create an
+incremental bundle to update the other repository:
 
 ----------------
 machineA$ cd R1
@@ -143,8 +143,8 @@ machineA$ git bundle create file.bundle lastR2bundle..master
 machineA$ git tag -f lastR2bundle master
 ----------------
 
-and sneakernet it to the other machine to replace /home/me/tmp/file.bundle,
-and pull from it.
+You then transfer the bundle to the other machine to replace
+/home/me/tmp/file.bundle, and pull from it.
 
 ----------------
 machineB$ cd R2
@@ -152,49 +152,49 @@ machineB$ git pull
 ----------------
 
 If you know up to what commit the intended recipient repository should
-have the necessary objects for, you can use that knowledge to specify the
+have the necessary objects, you can use that knowledge to specify the
 basis, giving a cut-off point to limit the revisions and objects that go
 in the resulting bundle. The previous example used lastR2bundle tag
-for this purpose, but you can use other options you would give to
+for this purpose, but you can use any other options that you would give to
 the linkgit:git-log[1] command. Here are more examples:
 
-You can use a tag that is present in both.
+You can use a tag that is present in both:
 
 ----------------
 $ git bundle create mybundle v1.0.0..master
 ----------------
 
-You can use a basis based on time.
+You can use a basis based on time:
 
 ----------------
 $ git bundle create mybundle --since=10.days master
 ----------------
 
-Or you can use the number of commits.
+You can use the number of commits:
 
 ----------------
 $ git bundle create mybundle -10 master
 ----------------
 
 You can run `git-bundle verify` to see if you can extract from a bundle
-that was created with a basis.
+that was created with a basis:
 
 ----------------
 $ git bundle verify mybundle
 ----------------
 
 This will list what commits you must have in order to extract from the
-bundle and will error out if you don't have them.
+bundle and will error out if you do not have them.
 
 A bundle from a recipient repository's point of view is just like a
-regular repository it fetches/pulls from. You can for example map
-refs, like this example, when fetching:
+regular repository which it fetches or pulls from. You can, for example, map
+references when fetching:
 
 ----------------
 $ git fetch mybundle master:localRef
 ----------------
 
-Or see what refs it offers.
+You can also see what references it offers.
 
 ----------------
 $ git ls-remote mybundle

Documentation/git-cat-file.txt

@@ -3,7 +3,7 @@ git-cat-file(1)
 
 NAME
 ----
-git-cat-file - Provide content or type/size information for repository objects
+git-cat-file - Provide content or type and size information for repository objects
 
 
 SYNOPSIS
@@ -14,19 +14,19 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-In the first form, provides content or type of objects in the repository. The
-type is required unless '-t' or '-p' is used to find the object type, or '-s'
-is used to find the object size.
+In its first form, the command provides the content or the type of an object in
+the repository. The type is required unless '-t' or '-p' is used to find the
+object type, or '-s' is used to find the object size.
 
-In the second form, a list of object (separated by LFs) is provided on stdin,
-and the SHA1, type, and size of each object is printed on stdout.
+In the second form, a list of objects (separated by linefeeds) is provided on
+stdin, and the SHA1, type, and size of each object is printed on stdout.
 
 OPTIONS
 -------
 <object>::
 	The name of the object to show.
 	For a more complete list of ways to spell object names, see
-	"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1].
+	the "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1].
 
 -t::
 	Instead of the content, show the object type identified by
@@ -56,8 +56,8 @@ OPTIONS
 	stdin. May not be combined with any other options or arguments.
 
 --batch-check::
-	Print the SHA1, type, and size of each object provided on stdin. May not be
-	combined with any other options or arguments.
+	Print the SHA1, type, and size of each object provided on stdin. May not
+	be combined with any other options or arguments.
 
 OUTPUT
 ------

Documentation/git-check-attr.txt

@@ -14,7 +14,7 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-For every pathname, this command will list if each attr is 'unspecified',
+For every pathname, this command will list if each attribute is 'unspecified',
 'set', or 'unset' as a gitattribute on that pathname.
 
 OPTIONS
@@ -23,11 +23,11 @@ OPTIONS
 	Read file names from stdin instead of from the command-line.
 
 -z::
-	Only meaningful with `--stdin`; paths are separated with
-	NUL character instead of LF.
+	Only meaningful with `--stdin`; paths are separated with a
+	NUL character instead of a linefeed character.
 
 \--::
-	Interpret all preceding arguments as attributes, and all following
+	Interpret all preceding arguments as attributes and all following
 	arguments as path names. If not supplied, only the first argument will
 	be treated as an attribute.
 
@@ -37,12 +37,12 @@ OUTPUT
 The output is of the form:
 <path> COLON SP <attribute> COLON SP <info> LF
 
-Where <path> is the path of a file being queried, <attribute> is an attribute
+<path> is the path of a file being queried, <attribute> is an attribute
 being queried and <info> can be either:
 
 'unspecified';; when the attribute is not defined for the path.
-'unset';;	when the attribute is defined to false.
-'set';;		when the attribute is defined to true.
+'unset';;	when the attribute is defined as false.
+'set';;		when the attribute is defined as true.
 <value>;;	when a value has been assigned to the attribute.
 
 EXAMPLES
@@ -69,7 +69,7 @@ org/example/MyClass.java: diff: java
 org/example/MyClass.java: myAttr: set
 ---------------
 
-* Listing attribute for multiple files:
+* Listing an attribute for multiple files:
 ---------------
 $ git check-attr myAttr -- org/example/MyClass.java org/example/NoMyAttr.java
 org/example/MyClass.java: myAttr: set

Documentation/git-check-ref-format.txt

@@ -3,7 +3,7 @@ git-check-ref-format(1)
 
 NAME
 ----
-git-check-ref-format - Make sure ref name is well formed
+git-check-ref-format - Ensures that a reference name is well formed
 
 SYNOPSIS
 --------
@@ -11,40 +11,40 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-Checks if a given 'refname' is acceptable, and exits non-zero if
-it is not.
+Checks if a given 'refname' is acceptable, and exits with a non-zero
+status if it is not.
 
 A reference is used in git to specify branches and tags.  A
-branch head is stored under `$GIT_DIR/refs/heads` directory, and
-a tag is stored under `$GIT_DIR/refs/tags` directory.  git
-imposes the following rules on how refs are named:
+branch head is stored under the `$GIT_DIR/refs/heads` directory, and
+a tag is stored under the `$GIT_DIR/refs/tags` directory.  git
+imposes the following rules on how references are named:
 
-. It can include slash `/` for hierarchical (directory)
+. They can include slash `/` for hierarchical (directory)
   grouping, but no slash-separated component can begin with a
-  dot `.`;
+  dot `.`.
 
-. It cannot have two consecutive dots `..` anywhere;
+. They cannot have two consecutive dots `..` anywhere.
 
-. It cannot have ASCII control character (i.e. bytes whose
+. They cannot have ASCII control characters (i.e. bytes whose
   values are lower than \040, or \177 `DEL`), space, tilde `~`,
   caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`,
-  or open bracket `[` anywhere;
+  or open bracket `[` anywhere.
 
-. It cannot end with a slash `/`.
+. They cannot end with a slash `/`.
 
-These rules makes it easy for shell script based tools to parse
-refnames, pathname expansion by the shell when a refname is used
+These rules make it easy for shell script based tools to parse
+reference names, pathname expansion by the shell when a reference name is used
 unquoted (by mistake), and also avoids ambiguities in certain
-refname expressions (see linkgit:git-rev-parse[1]).  Namely:
+reference name expressions (see linkgit:git-rev-parse[1]):
 
-. double-dot `..` are often used as in `ref1..ref2`, and in some
-  context this notation means `{caret}ref1 ref2` (i.e. not in
-  ref1 and in ref2).
+. A double-dot `..` is often used as in `ref1..ref2`, and in some
+  contexts this notation means `{caret}ref1 ref2` (i.e. not in
+  `ref1` and in `ref2`).
 
-. tilde `~` and caret `{caret}` are used to introduce postfix
+. A tilde `~` and caret `{caret}` are used to introduce the postfix
   'nth parent' and 'peel onion' operation.
 
-. colon `:` is used as in `srcref:dstref` to mean "use srcref\'s
+. A colon `:` is used as in `srcref:dstref` to mean "use srcref\'s
   value and store it in dstref" in fetch and push operations.
   It may also be used to select a specific object such as with
   'git-cat-file': "git cat-file blob v1.3.3:refs.c".

Documentation/git-clone.txt

@@ -117,7 +117,7 @@ then the cloned repository will become corrupt.
 --origin <name>::
 -o <name>::
 	Instead of using the remote name 'origin' to keep track
-	of the upstream repository, use <name> instead.
+	of the upstream repository, use <name>.
 
 --upload-pack <upload-pack>::
 -u <upload-pack>::

Documentation/git-cvsimport.txt

@@ -65,7 +65,7 @@ OPTIONS
 -r <remote>::
 	The git remote to import this CVS repository into.
 	Moves all CVS branches into remotes/<remote>/<branch>
-	akin to the 'git-clone' "--use-separate-remote" option.
+	akin to the way 'git-clone' uses 'origin' by default.
 
 -o <branch-for-HEAD>::
 	When no remote is specified (via -r) the 'HEAD' branch
@@ -173,24 +173,26 @@ ISSUES
 Problems related to timestamps:
 
  * If timestamps of commits in the cvs repository are not stable enough
-   to be used for ordering commits
+   to be used for ordering commits changes may show up in the wrong
+   order.
  * If any files were ever "cvs import"ed more than once (e.g., import of
-   more than one vendor release)
+   more than one vendor release) the HEAD contains the wrong content.
  * If the timestamp order of different files cross the revision order
-   within the commit matching time window
+   within the commit matching time window the order of commits may be
+   wrong.
 
 Problems related to branches:
 
- * Branches on which no commits have been made are not imported
+ * Branches on which no commits have been made are not imported.
  * All files from the branching point are added to a branch even if
-   never added in cvs
- * files added to the source branch *after* a daughter branch was
-   created: If previously no commit was made on the daugther branch they
-   will erroneously be added to the daughter branch in git
+   never added in cvs.
+ * This applies to files added to the source branch *after* a daughter
+   branch was created: if previously no commit was made on the daughter
+   branch they will erroneously be added to the daughter branch in git.
 
 Problems related to tags:
 
-* Multiple tags on the same revision are not imported
+* Multiple tags on the same revision are not imported.
 
 If you suspect that any of these issues may apply to the repository you
 want to import consider using these alternative tools which proved to be

Documentation/git-format-patch.txt

@@ -40,15 +40,11 @@ There are two ways to specify which commits to operate on.
    REVISIONS" section in linkgit:git-rev-parse[1]) means the
    commits in the specified range.
 
-A single commit, when interpreted as a <revision range>
-expression, means "everything that leads to that commit", but
-if you write 'git format-patch <commit>', the previous rule
-applies to that command line and you do not get "everything
-since the beginning of the time".  If you want to format
-everything since project inception to one commit, say "git
-format-patch \--root <commit>" to make it clear that it is the
-latter case.  If you want to format a single commit, you can do
-this with "git format-patch -1 <commit>".
+The first rule takes precedence in the case of a single <commit>.  To
+apply the second rule, i.e., format everything since the beginning of
+history up until <commit>, use the '\--root' option: "git format-patch
+\--root <commit>".  If you want to format only <commit> itself, you
+can do this with "git format-patch -1 <commit>".
 
 By default, each output file is numbered sequentially from 1, and uses the
 first line of the commit message (massaged for pathname safety) as
@@ -161,6 +157,11 @@ if that is not set.
 	Add a "Cc:" header to the email headers. This is in addition
 	to any configured headers, and may be used multiple times.
 
+--add-header=<header>::
+	Add an arbitrary header to the email headers.  This is in addition
+	to any configured headers, and may be used multiple times.
+	For example, --add-header="Organization: git-foo"
+
 --cover-letter::
 	In addition to the patches, generate a cover letter file
 	containing the shortlog and the overall diffstat.  You can
@@ -182,6 +183,13 @@ not add any suffix.
 	applied.  By default the contents of changes in those files are
 	encoded in the patch.
 
+--root::
+	Treat the revision argument as a <revision range>, even if it
+	is just a single commit (that would normally be treated as a
+	<since>).  Note that root commits included in the specified
+	range are always formatted as creation patches, independently
+	of this flag.
+
 CONFIGURATION
 -------------
 You can specify extra mail header lines to be added to each message

Documentation/git-merge.txt

@@ -40,8 +40,8 @@ include::merge-options.txt[]
 include::merge-strategies.txt[]
 
 
-If you tried a merge which resulted in a complex conflicts and
-would want to start over, you can recover with 'git-reset'.
+If you tried a merge which resulted in complex conflicts and
+want to start over, you can recover with 'git-reset'.
 
 CONFIGURATION
 -------------

Documentation/git-patch-id.txt

@@ -20,7 +20,7 @@ IOW, you can use this thing to look for likely duplicate commits.
 
 When dealing with 'git-diff-tree' output, it takes advantage of
 the fact that the patch is prefixed with the object name of the
-commit, and outputs two 40-byte hexadecimal string.  The first
+commit, and outputs two 40-byte hexadecimal strings.  The first
 string is the patch ID, and the second string is the commit ID.
 This can be used to make a mapping from patch ID to commit ID.
 

Documentation/git-svn.txt

@@ -385,7 +385,8 @@ config key: svn.authorsfile
 
 -q::
 --quiet::
-	Make 'git-svn' less verbose.
+	Make 'git-svn' less verbose. Specify a second time to make it
+	even less verbose.
 
 --repack[=<n>]::
 --repack-flags=<flags>::
@@ -672,9 +673,9 @@ listed below are allowed:
 ------------------------------------------------------------------------
 [svn-remote "project-a"]
 	url = http://server.org/svn
+	fetch = trunk/project-a:refs/remotes/project-a/trunk
 	branches = branches/*/project-a:refs/remotes/project-a/branches/*
 	tags = tags/*/project-a:refs/remotes/project-a/tags/*
-	trunk = trunk/project-a:refs/remotes/project-a/trunk
 ------------------------------------------------------------------------
 
 Keep in mind that the '*' (asterisk) wildcard of the local ref

Documentation/git-tag.txt

@@ -63,6 +63,7 @@ OPTIONS
 	are printed when using -l.
 	The default is not to print any annotation lines.
 	If no number is given to `-n`, only the first line is printed.
+	If the tag is not annotated, the commit message is displayed instead.
 
 -l <pattern>::
 	List tags with names that match the given pattern (or all if no pattern is given).

Documentation/githooks.txt

@@ -151,6 +151,10 @@ indicating whether the checkout was a branch checkout (changing branches,
 flag=1) or a file checkout (retrieving a file from the index, flag=0).
 This hook cannot affect the outcome of 'git-checkout'.
 
+It is also run after 'git-clone', unless the --no-checkout (-n) option is
+used. The first parameter given to the hook is the null-ref, the second the
+ref of the new HEAD and the flag is always 1.
+
 This hook can be used to perform repository validity checks, auto-display
 differences from the previous HEAD if different, or set working dir metadata
 properties.

Documentation/manpage-1.72.xsl

@@ -1,21 +1,14 @@
-<!-- Based on callouts.xsl. Fixes man page callouts for DocBook 1.72 XSL -->
-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
+<!-- manpage-1.72.xsl:
+     special settings for manpages rendered from asciidoc+docbook
+     handles peculiarities in docbook-xsl 1.72.0 -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
 
-<xsl:param name="man.output.quietly" select="1"/>
-<xsl:param name="refentry.meta.get.quietly" select="1"/>
+<xsl:import href="manpage-base.xsl"/>
 
-<xsl:template match="co">
-	<xsl:value-of select="concat('&#x2593;fB(',substring-after(@id,'-'),')&#x2593;fR')"/>
-</xsl:template>
-<xsl:template match="calloutlist">
-	<xsl:text>&#x2302;sp&#10;</xsl:text>
-	<xsl:apply-templates/>
-	<xsl:text>&#10;</xsl:text>
-</xsl:template>
-<xsl:template match="callout">
-	<xsl:value-of select="concat('&#x2593;fB',substring-after(@arearefs,'-'),'. &#x2593;fR')"/>
-	<xsl:apply-templates/>
-	<xsl:text>&#x2302;br&#10;</xsl:text>
-</xsl:template>
+<!-- these are the special values for the roff control characters
+     needed for docbook-xsl 1.72.0 -->
+<xsl:param name="git.docbook.backslash">&#x2593;</xsl:param>
+<xsl:param name="git.docbook.dot"      >&#x2302;</xsl:param>
 
 </xsl:stylesheet>

Documentation/manpage-base.xsl

@@ -0,0 +1,35 @@
+<!-- manpage-base.xsl:
+     special formatting for manpages rendered from asciidoc+docbook -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<!-- these params silence some output from xmlto -->
+<xsl:param name="man.output.quietly" select="1"/>
+<xsl:param name="refentry.meta.get.quietly" select="1"/>
+
+<!-- convert asciidoc callouts to man page format;
+     git.docbook.backslash and git.docbook.dot params
+     must be supplied by another XSL file or other means -->
+<xsl:template match="co">
+	<xsl:value-of select="concat(
+			      $git.docbook.backslash,'fB(',
+			      substring-after(@id,'-'),')',
+			      $git.docbook.backslash,'fR')"/>
+</xsl:template>
+<xsl:template match="calloutlist">
+	<xsl:value-of select="$git.docbook.dot"/>
+	<xsl:text>sp&#10;</xsl:text>
+	<xsl:apply-templates/>
+	<xsl:text>&#10;</xsl:text>
+</xsl:template>
+<xsl:template match="callout">
+	<xsl:value-of select="concat(
+			      $git.docbook.backslash,'fB',
+			      substring-after(@arearefs,'-'),
+			      '. ',$git.docbook.backslash,'fR')"/>
+	<xsl:apply-templates/>
+	<xsl:value-of select="$git.docbook.dot"/>
+	<xsl:text>br&#10;</xsl:text>
+</xsl:template>
+
+</xsl:stylesheet>

Documentation/manpage-bold-literal.xsl

@@ -0,0 +1,17 @@
+<!-- manpage-bold-literal.xsl:
+     special formatting for manpages rendered from asciidoc+docbook -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<!-- render literal text as bold (instead of plain or monospace);
+     this makes literal text easier to distinguish in manpages
+     viewed on a tty -->
+<xsl:template match="literal">
+	<xsl:value-of select="$git.docbook.backslash"/>
+	<xsl:text>fB</xsl:text>
+	<xsl:apply-templates/>
+	<xsl:value-of select="$git.docbook.backslash"/>
+	<xsl:text>fR</xsl:text>
+</xsl:template>
+
+</xsl:stylesheet>

Documentation/manpage-normal.xsl

@@ -0,0 +1,13 @@
+<!-- manpage-normal.xsl:
+     special settings for manpages rendered from asciidoc+docbook
+     handles anything we want to keep away from docbook-xsl 1.72.0 -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<xsl:import href="manpage-base.xsl"/>
+
+<!-- these are the normal values for the roff control characters -->
+<xsl:param name="git.docbook.backslash">\</xsl:param>
+<xsl:param name="git.docbook.dot"	>.</xsl:param>
+
+</xsl:stylesheet>

Documentation/manpage-suppress-sp.xsl

@@ -0,0 +1,21 @@
+<!-- manpage-suppress-sp.xsl:
+     special settings for manpages rendered from asciidoc+docbook
+     handles erroneous, inline .sp in manpage output of some
+     versions of docbook-xsl -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+		version="1.0">
+
+<!-- attempt to work around spurious .sp at the tail of the line
+     that some versions of docbook stylesheets seem to add -->
+<xsl:template match="simpara">
+  <xsl:variable name="content">
+    <xsl:apply-templates/>
+  </xsl:variable>
+  <xsl:value-of select="normalize-space($content)"/>
+  <xsl:if test="not(ancestor::authorblurb) and
+                not(ancestor::personblurb)">
+    <xsl:text>&#10;&#10;</xsl:text>
+  </xsl:if>
+</xsl:template>
+
+</xsl:stylesheet>

Documentation/merge-strategies.txt

@@ -3,15 +3,15 @@ MERGE STRATEGIES
 
 resolve::
 	This can only resolve two heads (i.e. the current branch
-	and another branch you pulled from) using 3-way merge
+	and another branch you pulled from) using a 3-way merge
 	algorithm.  It tries to carefully detect criss-cross
 	merge ambiguities and is considered generally safe and
 	fast.
 
 recursive::
-	This can only resolve two heads using 3-way merge
-	algorithm.  When there are more than one common
-	ancestors that can be used for 3-way merge, it creates a
+	This can only resolve two heads using a 3-way merge
+	algorithm.  When there is more than one common
+	ancestor that can be used for 3-way merge, it creates a
 	merged tree of the common ancestors and uses that as
 	the reference tree for the 3-way merge.  This has been
 	reported to result in fewer merge conflicts without
@@ -22,11 +22,11 @@ recursive::
 	pulling or merging one branch.
 
 octopus::
-	This resolves more than two-head case, but refuses to do
-	complex merge that needs manual resolution.  It is
+	This resolves cases with more than two heads, but refuses to do
+	a complex merge that needs manual resolution.  It is
 	primarily meant to be used for bundling topic branch
 	heads together.  This is the default merge strategy when
-	pulling or merging more than one branches.
+	pulling or merging more than one branch.
 
 ours::
 	This resolves any number of heads, but the result of the

Documentation/technical/api-history-graph.txt

@@ -148,22 +148,22 @@ outputting that information, if desired.
 ------------
 *
 *
-M
+*
 |\
 * |
 | | *
 | \ \
 |  \ \
-M-. \ \
+*-. \ \
 |\ \ \ \
 | | * | |
 | | | | | *
 | | | | | *
-| | | | | M
+| | | | | *
 | | | | | |\
 | | | | | | *
 | * | | | | |
-| | | | | M  \
+| | | | | *  \
 | | | | | |\  |
 | | | | * | | |
 | | | | * | | |

Makefile

@@ -263,6 +263,18 @@ SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 BASIC_CFLAGS =
 BASIC_LDFLAGS =
 
+# Guard against environment variables
+BUILTIN_OBJS =
+BUILT_INS =
+COMPAT_CFLAGS =
+COMPAT_OBJS =
+LIB_H =
+LIB_OBJS =
+PROGRAMS =
+SCRIPT_PERL =
+SCRIPT_SH =
+TEST_PROGRAMS =
+
 SCRIPT_SH += git-am.sh
 SCRIPT_SH += git-bisect.sh
 SCRIPT_SH += git-filter-branch.sh

attr.c

@@ -1,3 +1,4 @@
+#define NO_THE_INDEX_COMPATIBILITY_MACROS
 #include "cache.h"
 #include "attr.h"
 
@@ -318,6 +319,9 @@ static struct attr_stack *read_attr_from_array(const char **list)
 	return res;
 }
 
+static enum git_attr_direction direction;
+static struct index_state *use_index;
+
 static struct attr_stack *read_attr_from_file(const char *path, int macro_ok)
 {
 	FILE *fp = fopen(path, "r");
@@ -340,9 +344,10 @@ static void *read_index_data(const char *path)
 	unsigned long sz;
 	enum object_type type;
 	void *data;
+	struct index_state *istate = use_index ? use_index : &the_index;
 
 	len = strlen(path);
-	pos = cache_name_pos(path, len);
+	pos = index_name_pos(istate, path, len);
 	if (pos < 0) {
 		/*
 		 * We might be in the middle of a merge, in which
@@ -350,15 +355,15 @@ static void *read_index_data(const char *path)
 		 */
 		int i;
 		for (i = -pos - 1;
-		     (pos < 0 && i < active_nr &&
-		      !strcmp(active_cache[i]->name, path));
+		     (pos < 0 && i < istate->cache_nr &&
+		      !strcmp(istate->cache[i]->name, path));
 		     i++)
-			if (ce_stage(active_cache[i]) == 2)
+			if (ce_stage(istate->cache[i]) == 2)
 				pos = i;
 	}
 	if (pos < 0)
 		return NULL;
-	data = read_sha1_file(active_cache[pos]->sha1, &type, &sz);
+	data = read_sha1_file(istate->cache[pos]->sha1, &type, &sz);
 	if (!data || type != OBJ_BLOB) {
 		free(data);
 		return NULL;
@@ -366,27 +371,17 @@ static void *read_index_data(const char *path)
 	return data;
 }
 
-static struct attr_stack *read_attr(const char *path, int macro_ok)
+static struct attr_stack *read_attr_from_index(const char *path, int macro_ok)
 {
 	struct attr_stack *res;
 	char *buf, *sp;
 	int lineno = 0;
 
-	res = read_attr_from_file(path, macro_ok);
-	if (res)
-		return res;
-
-	res = xcalloc(1, sizeof(*res));
-
-	/*
-	 * There is no checked out .gitattributes file there, but
-	 * we might have it in the index.  We allow operation in a
-	 * sparsely checked out work tree, so read from it.
-	 */
 	buf = read_index_data(path);
 	if (!buf)
-		return res;
+		return NULL;
 
+	res = xcalloc(1, sizeof(*res));
 	for (sp = buf; *sp; ) {
 		char *ep;
 		int more;
@@ -401,6 +396,30 @@ static struct attr_stack *read_attr(const char *path, int macro_ok)
 	return res;
 }
 
+static struct attr_stack *read_attr(const char *path, int macro_ok)
+{
+	struct attr_stack *res;
+
+	if (direction == GIT_ATTR_CHECKOUT) {
+		res = read_attr_from_index(path, macro_ok);
+		if (!res)
+			res = read_attr_from_file(path, macro_ok);
+	}
+	else {
+		res = read_attr_from_file(path, macro_ok);
+		if (!res)
+			/*
+			 * There is no checked out .gitattributes file there, but
+			 * we might have it in the index.  We allow operation in a
+			 * sparsely checked out work tree, so read from it.
+			 */
+			res = read_attr_from_index(path, macro_ok);
+	}
+	if (!res)
+		res = xcalloc(1, sizeof(*res));
+	return res;
+}
+
 #if DEBUG_ATTR
 static void debug_info(const char *what, struct attr_stack *elem)
 {
@@ -428,6 +447,15 @@ static void debug_set(const char *what, const char *match, struct git_attr *attr
 #define debug_set(a,b,c,d) do { ; } while (0)
 #endif
 
+static void drop_attr_stack(void)
+{
+	while (attr_stack) {
+		struct attr_stack *elem = attr_stack;
+		attr_stack = elem->prev;
+		free_attr_elem(elem);
+	}
+}
+
 static void bootstrap_attr_stack(void)
 {
 	if (!attr_stack) {
@@ -642,3 +670,12 @@ int git_checkattr(const char *path, int num, struct git_attr_check *check)
 
 	return 0;
 }
+
+void git_attr_set_direction(enum git_attr_direction new, struct index_state *istate)
+{
+	enum git_attr_direction old = direction;
+	direction = new;
+	if (new != old)
+		drop_attr_stack();
+	use_index = istate;
+}

attr.h

@@ -31,4 +31,10 @@ struct git_attr_check {
 
 int git_checkattr(const char *path, int, struct git_attr_check *);
 
+enum git_attr_direction {
+	GIT_ATTR_CHECKIN,
+	GIT_ATTR_CHECKOUT
+};
+void git_attr_set_direction(enum git_attr_direction, struct index_state *);
+
 #endif /* ATTR_H */

builtin-blame.c

@@ -2250,6 +2250,10 @@ int cmd_blame(int argc, const char **argv, const char *prefix)
 parse_done:
 	argc = parse_options_end(&ctx);
 
+	if (revs_file && read_ancestry(revs_file))
+		die("reading graft file %s failed: %s",
+		    revs_file, strerror(errno));
+
 	if (cmd_is_annotate) {
 		output_option |= OUTPUT_ANNOTATE_COMPAT;
 		blame_date_mode = DATE_ISO8601;
@@ -2418,10 +2422,6 @@ int cmd_blame(int argc, const char **argv, const char *prefix)
 	sb.ent = ent;
 	sb.path = path;
 
-	if (revs_file && read_ancestry(revs_file))
-		die("reading graft file %s failed: %s",
-		    revs_file, strerror(errno));
-
 	read_mailmap(&mailmap, NULL);
 
 	if (!incremental)

builtin-branch.c

@@ -171,7 +171,7 @@ static int delete_branches(int argc, const char **argv, int force, int kinds)
 			ret = 1;
 		} else {
 			struct strbuf buf = STRBUF_INIT;
-			printf("Deleted %sbranch %s (%s).\n", remote,
+			printf("Deleted %sbranch %s (was %s).\n", remote,
 			       bname.buf,
 			       find_unique_abbrev(sha1, DEFAULT_ABBREV));
 			strbuf_addf(&buf, "branch.%s", bname.buf);

builtin-clone.c

@@ -270,7 +270,7 @@ static const struct ref *clone_local(const char *src_repo,
 
 static const char *junk_work_tree;
 static const char *junk_git_dir;
-pid_t junk_pid;
+static pid_t junk_pid;
 
 static void remove_junk(void)
 {
@@ -406,7 +406,7 @@ int cmd_clone(int argc, const char **argv, const char *prefix)
 	atexit(remove_junk);
 	sigchain_push_common(remove_junk_on_signal);
 
-	setenv(CONFIG_ENVIRONMENT, xstrdup(mkpath("%s/config", git_dir)), 1);
+	setenv(CONFIG_ENVIRONMENT, mkpath("%s/config", git_dir), 1);
 
 	if (safe_create_leading_directories_const(git_dir) < 0)
 		die("could not create leading directories of '%s'", git_dir);

builtin-fast-export.c

@@ -221,7 +221,8 @@ static void handle_commit(struct commit *commit, struct rev_info *rev)
 	if (message)
 		message += 2;
 
-	if (commit->parents) {
+	if (commit->parents &&
+	    get_object_mark(&commit->parents->item->object) != 0) {
 		parse_commit(commit->parents->item);
 		diff_tree_sha1(commit->parents->item->tree->object.sha1,
 			       commit->tree->object.sha1, "", &rev->diffopt);
@@ -362,7 +363,10 @@ static void get_tags_and_duplicates(struct object_array *pending,
 			break;
 		case OBJ_TAG:
 			tag = (struct tag *)e->item;
+
+			/* handle nested tags */
 			while (tag && tag->object.type == OBJ_TAG) {
+				parse_object(tag->object.sha1);
 				string_list_append(full_name, extra_refs)->util = tag;
 				tag = (struct tag *)tag->tagged;
 			}
@@ -375,11 +379,17 @@ static void get_tags_and_duplicates(struct object_array *pending,
 			case OBJ_BLOB:
 				handle_object(tag->object.sha1);
 				continue;
+			default: /* OBJ_TAG (nested tags) is already handled */
+				warning("Tag points to object of unexpected type %s, skipping.",
+					typename(tag->object.type));
+				continue;
 			}
 			break;
 		default:
-			die ("Unexpected object of type %s",
-			     typename(e->item->type));
+			warning("%s: Unexpected object of type %s, skipping.",
+				e->name,
+				typename(e->item->type));
+			continue;
 		}
 		if (commit->util)
 			/* more than one name for the same object */

builtin-fetch.c

@@ -197,11 +197,7 @@ static int update_local_ref(struct ref *ref,
 	struct commit *current = NULL, *updated;
 	enum object_type type;
 	struct branch *current_branch = branch_get(NULL);
-	const char *pretty_ref = ref->name + (
-		!prefixcmp(ref->name, "refs/heads/") ? 11 :
-		!prefixcmp(ref->name, "refs/tags/") ? 10 :
-		!prefixcmp(ref->name, "refs/remotes/") ? 13 :
-		0);
+	const char *pretty_ref = prettify_ref(ref);
 
 	*display = 0;
 	type = sha1_object_info(ref->new_sha1, NULL);

builtin-log.c

@@ -918,6 +918,8 @@ int cmd_format_patch(int argc, const char **argv, const char *prefix)
 			cover_letter = 1;
 		else if (!strcmp(argv[i], "--no-binary"))
 			no_binary_diff = 1;
+		else if (!prefixcmp(argv[i], "--add-header="))
+			add_header(argv[i] + 13);
 		else
 			argv[j++] = argv[i];
 	}

builtin-pack-objects.c

@@ -1966,7 +1966,7 @@ static void add_objects_in_unpacked_packs(struct rev_info *revs)
 		const unsigned char *sha1;
 		struct object *o;
 
-		if (p->pack_keep)
+		if (!p->pack_local || p->pack_keep)
 			continue;
 		if (open_pack_index(p))
 			die("cannot open pack index");
@@ -1995,6 +1995,29 @@ static void add_objects_in_unpacked_packs(struct rev_info *revs)
 	free(in_pack.array);
 }
 
+static int has_sha1_pack_kept_or_nonlocal(const unsigned char *sha1)
+{
+	static struct packed_git *last_found = (void *)1;
+	struct packed_git *p;
+
+	p = (last_found != (void *)1) ? last_found : packed_git;
+
+	while (p) {
+		if ((!p->pack_local || p->pack_keep) &&
+			find_pack_entry_one(sha1, p)) {
+			last_found = p;
+			return 1;
+		}
+		if (p == last_found)
+			p = packed_git;
+		else
+			p = p->next;
+		if (p == last_found)
+			p = p->next;
+	}
+	return 0;
+}
+
 static void loosen_unused_packed_objects(struct rev_info *revs)
 {
 	struct packed_git *p;
@@ -2002,7 +2025,7 @@ static void loosen_unused_packed_objects(struct rev_info *revs)
 	const unsigned char *sha1;
 
 	for (p = packed_git; p; p = p->next) {
-		if (p->pack_keep)
+		if (!p->pack_local || p->pack_keep)
 			continue;
 
 		if (open_pack_index(p))
@@ -2010,7 +2033,8 @@ static void loosen_unused_packed_objects(struct rev_info *revs)
 
 		for (i = 0; i < p->num_objects; i++) {
 			sha1 = nth_packed_object_sha1(p, i);
-			if (!locate_object_entry(sha1))
+			if (!locate_object_entry(sha1) &&
+				!has_sha1_pack_kept_or_nonlocal(sha1))
 				if (force_object_loose(sha1, p->mtime))
 					die("unable to force loose object");
 		}
@@ -2200,7 +2224,6 @@ int cmd_pack_objects(int argc, const char **argv, const char *prefix)
 			continue;
 		}
 		if (!strcmp("--unpacked", arg) ||
-		    !strcmp("--kept-pack-only", arg) ||
 		    !strcmp("--reflog", arg) ||
 		    !strcmp("--all", arg)) {
 			use_internal_rev_list = 1;

builtin-push.c

@@ -48,6 +48,71 @@ static void set_refspecs(const char **refs, int nr)
 	}
 }
 
+static void setup_push_tracking(void)
+{
+	struct strbuf refspec = STRBUF_INIT;
+	struct branch *branch = branch_get(NULL);
+	if (!branch)
+		die("You are not currently on a branch.");
+	if (!branch->merge_nr)
+		die("The current branch %s is not tracking anything.",
+		    branch->name);
+	if (branch->merge_nr != 1)
+		die("The current branch %s is tracking multiple branches, "
+		    "refusing to push.", branch->name);
+	strbuf_addf(&refspec, "%s:%s", branch->name, branch->merge[0]->src);
+	add_refspec(refspec.buf);
+}
+
+static const char *warn_unconfigured_push_msg[] = {
+	"You did not specify any refspecs to push, and the current remote",
+	"has not configured any push refspecs. The default action in this",
+	"case is to push all matching refspecs, that is, all branches",
+	"that exist both locally and remotely will be updated.  This may",
+	"not necessarily be what you want to happen.",
+	"",
+	"You can specify what action you want to take in this case, and",
+	"avoid seeing this message again, by configuring 'push.default' to:",
+	"  'nothing'  : Do not push anything",
+	"  'matching' : Push all matching branches (default)",
+	"  'tracking' : Push the current branch to whatever it is tracking",
+	"  'current'  : Push the current branch"
+};
+
+static void warn_unconfigured_push(void)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(warn_unconfigured_push_msg); i++)
+		warning("%s", warn_unconfigured_push_msg[i]);
+}
+
+static void setup_default_push_refspecs(void)
+{
+	git_config(git_default_config, NULL);
+	switch (push_default) {
+	case PUSH_DEFAULT_UNSPECIFIED:
+		warn_unconfigured_push();
+		/* fallthrough */
+
+	case PUSH_DEFAULT_MATCHING:
+		add_refspec(":");
+		break;
+
+	case PUSH_DEFAULT_TRACKING:
+		setup_push_tracking();
+		break;
+
+	case PUSH_DEFAULT_CURRENT:
+		add_refspec("HEAD");
+		break;
+
+	case PUSH_DEFAULT_NOTHING:
+		die("You didn't specify any refspecs to push, and "
+		    "push.default is \"nothing\".");
+		break;
+	}
+}
+
 static int do_push(const char *repo, int flags)
 {
 	int i, errs;
@@ -79,11 +144,12 @@ static int do_push(const char *repo, int flags)
 		return error("--all and --mirror are incompatible");
 	}
 
-	if (!refspec
-		&& !(flags & TRANSPORT_PUSH_ALL)
-		&& remote->push_refspec_nr) {
-		refspec = remote->push_refspec;
-		refspec_nr = remote->push_refspec_nr;
+	if (!refspec && !(flags & TRANSPORT_PUSH_ALL)) {
+		if (remote->push_refspec_nr) {
+			refspec = remote->push_refspec;
+			refspec_nr = remote->push_refspec_nr;
+		} else if (!(flags & TRANSPORT_PUSH_MIRROR))
+			setup_default_push_refspecs();
 	}
 	errs = 0;
 	for (i = 0; i < remote->url_nr; i++) {

builtin-remote.c

@@ -922,6 +922,20 @@ int add_push_to_show_info(struct string_list_item *push_item, void *cb_data)
 	return 0;
 }
 
+/*
+ * Sorting comparison for a string list that has push_info
+ * structs in its util field
+ */
+static int cmp_string_with_push(const void *va, const void *vb)
+{
+	const struct string_list_item *a = va;
+	const struct string_list_item *b = vb;
+	const struct push_info *a_push = a->util;
+	const struct push_info *b_push = b->util;
+	int cmp = strcmp(a->string, b->string);
+	return cmp ? cmp : strcmp(a_push->dest, b_push->dest);
+}
+
 int show_push_info_item(struct string_list_item *item, void *cb_data)
 {
 	struct show_info *show_info = cb_data;
@@ -1032,7 +1046,8 @@ static int show(int argc, const char **argv)
 
 		info.width = info.width2 = 0;
 		for_each_string_list(add_push_to_show_info, &states.push, &info);
-		sort_string_list(info.list);
+		qsort(info.list->items, info.list->nr,
+			sizeof(*info.list->items), cmp_string_with_push);
 		if (info.list->nr)
 			printf("  Local ref%s configured for 'git push'%s:\n",
 				info.list->nr > 1 ? "s" : "",

builtin-send-pack.c

@@ -10,9 +10,7 @@ static const char send_pack_usage[] =
 "git send-pack [--all | --mirror] [--dry-run] [--force] [--receive-pack=<git-receive-pack>] [--verbose] [--thin] [<host>:]<directory> [<ref>...]\n"
 "  --all and explicit <ref> specification are mutually exclusive.";
 
-static struct send_pack_args args = {
-	/* .receivepack = */ "git-receive-pack",
-};
+static struct send_pack_args args;
 
 static int feed_object(const unsigned char *sha1, int fd, int negative)
 {
@@ -31,7 +29,7 @@ static int feed_object(const unsigned char *sha1, int fd, int negative)
 /*
  * Make a pack stream and spit it out into file descriptor fd
  */
-static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *extra)
+static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *extra, struct send_pack_args *args)
 {
 	/*
 	 * The child becomes pack-objects --revs; we feed
@@ -49,7 +47,7 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext
 	struct child_process po;
 	int i;
 
-	if (args.use_thin_pack)
+	if (args->use_thin_pack)
 		argv[4] = "--thin";
 	memset(&po, 0, sizeof(po));
 	po.argv = argv;
@@ -83,8 +81,6 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext
 	return 0;
 }
 
-static struct ref *remote_refs, **remote_tail;
-
 static int receive_status(int in, struct ref *refs)
 {
 	struct ref *hint;
@@ -172,16 +168,6 @@ static void update_tracking_ref(struct remote *remote, struct ref *ref)
 	}
 }
 
-static const char *prettify_ref(const struct ref *ref)
-{
-	const char *name = ref->name;
-	return name + (
-		!prefixcmp(name, "refs/heads/") ? 11 :
-		!prefixcmp(name, "refs/tags/") ? 10 :
-		!prefixcmp(name, "refs/remotes/") ? 13 :
-		0);
-}
-
 #define SUMMARY_WIDTH (2 * DEFAULT_ABBREV + 3)
 
 static void print_ref_status(char flag, const char *summary, struct ref *to, struct ref *from, const char *msg)
@@ -310,27 +296,19 @@ static int refs_pushed(struct ref *ref)
 	return 0;
 }
 
-static int do_send_pack(int in, int out, struct remote *remote, const char *dest, int nr_refspec, const char **refspec)
+int send_pack(struct send_pack_args *args,
+	      int fd[], struct child_process *conn,
+	      struct ref *remote_refs,
+	      struct extra_have_objects *extra_have)
 {
-	struct ref *ref, *local_refs;
+	int in = fd[0];
+	int out = fd[1];
+	struct ref *ref;
 	int new_refs;
 	int ask_for_status_report = 0;
 	int allow_deleting_refs = 0;
 	int expect_status_report = 0;
-	int flags = MATCH_REFS_NONE;
 	int ret;
-	struct extra_have_objects extra_have;
-
-	memset(&extra_have, 0, sizeof(extra_have));
-	if (args.send_all)
-		flags |= MATCH_REFS_ALL;
-	if (args.send_mirror)
-		flags |= MATCH_REFS_MIRROR;
-
-	/* No funny business with the matcher */
-	remote_tail = get_remote_heads(in, &remote_refs, 0, NULL, REF_NORMAL,
-				       &extra_have);
-	local_refs = get_local_heads();
 
 	/* Does the other end support the reporting? */
 	if (server_supports("report-status"))
@@ -338,19 +316,9 @@ static int do_send_pack(int in, int out, struct remote *remote, const char *dest
 	if (server_supports("delete-refs"))
 		allow_deleting_refs = 1;
 
-	/* match them up */
-	if (!remote_tail)
-		remote_tail = &remote_refs;
-	if (match_refs(local_refs, remote_refs, &remote_tail,
-		       nr_refspec, refspec, flags)) {
-		close(out);
-		return -1;
-	}
-
 	if (!remote_refs) {
 		fprintf(stderr, "No refs in common and none specified; doing nothing.\n"
 			"Perhaps you should specify a branch such as 'master'.\n");
-		close(out);
 		return 0;
 	}
 
@@ -362,7 +330,7 @@ static int do_send_pack(int in, int out, struct remote *remote, const char *dest
 
 		if (ref->peer_ref)
 			hashcpy(ref->new_sha1, ref->peer_ref->new_sha1);
-		else if (!args.send_mirror)
+		else if (!args->send_mirror)
 			continue;
 
 		ref->deletion = is_null_sha1(ref->new_sha1);
@@ -401,7 +369,7 @@ static int do_send_pack(int in, int out, struct remote *remote, const char *dest
 		    (!has_sha1_file(ref->old_sha1)
 		      || !ref_newer(ref->new_sha1, ref->old_sha1));
 
-		if (ref->nonfastforward && !ref->force && !args.force_update) {
+		if (ref->nonfastforward && !ref->force && !args->force_update) {
 			ref->status = REF_STATUS_REJECT_NONFASTFORWARD;
 			continue;
 		}
@@ -409,7 +377,7 @@ static int do_send_pack(int in, int out, struct remote *remote, const char *dest
 		if (!ref->deletion)
 			new_refs++;
 
-		if (!args.dry_run) {
+		if (!args->dry_run) {
 			char *old_hex = sha1_to_hex(ref->old_sha1);
 			char *new_hex = sha1_to_hex(ref->new_sha1);
 
@@ -430,27 +398,19 @@ static int do_send_pack(int in, int out, struct remote *remote, const char *dest
 	}
 
 	packet_flush(out);
-	if (new_refs && !args.dry_run) {
-		if (pack_objects(out, remote_refs, &extra_have) < 0)
+	if (new_refs && !args->dry_run) {
+		if (pack_objects(out, remote_refs, extra_have, args) < 0) {
+			for (ref = remote_refs; ref; ref = ref->next)
+				ref->status = REF_STATUS_NONE;
 			return -1;
+		}
 	}
-	else
-		close(out);
 
 	if (expect_status_report)
 		ret = receive_status(in, remote_refs);
 	else
 		ret = 0;
 
-	print_push_status(dest, remote_refs);
-
-	if (!args.dry_run && remote) {
-		for (ref = remote_refs; ref; ref = ref->next)
-			update_tracking_ref(remote, ref);
-	}
-
-	if (!refs_pushed(remote_refs))
-		fprintf(stderr, "Everything up-to-date\n");
 	if (ret < 0)
 		return ret;
 	for (ref = remote_refs; ref; ref = ref->next) {
@@ -499,11 +459,19 @@ static void verify_remote_names(int nr_heads, const char **heads)
 
 int cmd_send_pack(int argc, const char **argv, const char *prefix)
 {
-	int i, nr_heads = 0;
-	const char **heads = NULL;
+	int i, nr_refspecs = 0;
+	const char **refspecs = NULL;
 	const char *remote_name = NULL;
 	struct remote *remote = NULL;
 	const char *dest = NULL;
+	int fd[2];
+	struct child_process *conn;
+	struct extra_have_objects extra_have;
+	struct ref *remote_refs, **remote_tail, *local_refs;
+	int ret;
+	int send_all = 0;
+	const char *receivepack = "git-receive-pack";
+	int flags;
 
 	argv++;
 	for (i = 1; i < argc; i++, argv++) {
@@ -511,11 +479,11 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 
 		if (*arg == '-') {
 			if (!prefixcmp(arg, "--receive-pack=")) {
-				args.receivepack = arg + 15;
+				receivepack = arg + 15;
 				continue;
 			}
 			if (!prefixcmp(arg, "--exec=")) {
-				args.receivepack = arg + 7;
+				receivepack = arg + 7;
 				continue;
 			}
 			if (!prefixcmp(arg, "--remote=")) {
@@ -523,7 +491,7 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 				continue;
 			}
 			if (!strcmp(arg, "--all")) {
-				args.send_all = 1;
+				send_all = 1;
 				continue;
 			}
 			if (!strcmp(arg, "--dry-run")) {
@@ -552,8 +520,8 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 			dest = arg;
 			continue;
 		}
-		heads = (const char **) argv;
-		nr_heads = argc - i;
+		refspecs = (const char **) argv;
+		nr_refspecs = argc - i;
 		break;
 	}
 	if (!dest)
@@ -562,8 +530,8 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 	 * --all and --mirror are incompatible; neither makes sense
 	 * with any refspecs.
 	 */
-	if ((heads && (args.send_all || args.send_mirror)) ||
-					(args.send_all && args.send_mirror))
+	if ((refspecs && (send_all || args.send_mirror)) ||
+	    (send_all && args.send_mirror))
 		usage(send_pack_usage);
 
 	if (remote_name) {
@@ -574,24 +542,50 @@ int cmd_send_pack(int argc, const char **argv, const char *prefix)
 		}
 	}
 
-	return send_pack(&args, dest, remote, nr_heads, heads);
-}
+	conn = git_connect(fd, dest, receivepack, args.verbose ? CONNECT_VERBOSE : 0);
 
-int send_pack(struct send_pack_args *my_args,
-	      const char *dest, struct remote *remote,
-	      int nr_heads, const char **heads)
-{
-	int fd[2], ret;
-	struct child_process *conn;
+	memset(&extra_have, 0, sizeof(extra_have));
 
-	memcpy(&args, my_args, sizeof(args));
+	get_remote_heads(fd[0], &remote_refs, 0, NULL, REF_NORMAL,
+			 &extra_have);
 
-	verify_remote_names(nr_heads, heads);
+	verify_remote_names(nr_refspecs, refspecs);
 
-	conn = git_connect(fd, dest, args.receivepack, args.verbose ? CONNECT_VERBOSE : 0);
-	ret = do_send_pack(fd[0], fd[1], remote, dest, nr_heads, heads);
+	local_refs = get_local_heads();
+
+	flags = MATCH_REFS_NONE;
+
+	if (send_all)
+		flags |= MATCH_REFS_ALL;
+	if (args.send_mirror)
+		flags |= MATCH_REFS_MIRROR;
+
+	/* match them up */
+	remote_tail = &remote_refs;
+	while (*remote_tail)
+		remote_tail = &((*remote_tail)->next);
+	if (match_refs(local_refs, remote_refs, &remote_tail,
+		       nr_refspecs, refspecs, flags)) {
+		return -1;
+	}
+
+	ret = send_pack(&args, fd, conn, remote_refs, &extra_have);
+
+	close(fd[1]);
 	close(fd[0]);
-	/* do_send_pack always closes fd[1] */
+
 	ret |= finish_connect(conn);
-	return !!ret;
+
+	print_push_status(dest, remote_refs);
+
+	if (!args.dry_run && remote) {
+		struct ref *ref;
+		for (ref = remote_refs; ref; ref = ref->next)
+			update_tracking_ref(remote, ref);
+	}
+
+	if (!ret && !refs_pushed(remote_refs))
+		fprintf(stderr, "Everything up-to-date\n");
+
+	return ret;
 }

cache.h

@@ -542,8 +542,17 @@ enum rebase_setup_type {
 	AUTOREBASE_ALWAYS,
 };
 
+enum push_default_type {
+	PUSH_DEFAULT_UNSPECIFIED = -1,
+	PUSH_DEFAULT_NOTHING = 0,
+	PUSH_DEFAULT_MATCHING,
+	PUSH_DEFAULT_TRACKING,
+	PUSH_DEFAULT_CURRENT,
+};
+
 extern enum branch_track git_branch_track;
 extern enum rebase_setup_type autorebase;
+extern enum push_default_type push_default;
 
 #define GIT_REPO_VERSION 0
 extern int repository_format_version;
@@ -646,7 +655,6 @@ extern int check_sha1_signature(const unsigned char *sha1, void *buf, unsigned l
 extern int move_temp_to_file(const char *tmpfile, const char *filename);
 
 extern int has_sha1_pack(const unsigned char *sha1);
-extern int has_sha1_kept_pack(const unsigned char *sha1);
 extern int has_sha1_file(const unsigned char *sha1);
 extern int has_loose_object_nonlocal(const unsigned char *sha1);
 

config.c

@@ -565,6 +565,31 @@ static int git_default_branch_config(const char *var, const char *value)
 	return 0;
 }
 
+static int git_default_push_config(const char *var, const char *value)
+{
+	if (!strcmp(var, "push.default")) {
+		if (!value)
+			return config_error_nonbool(var);
+		else if (!strcmp(value, "nothing"))
+			push_default = PUSH_DEFAULT_NOTHING;
+		else if (!strcmp(value, "matching"))
+			push_default = PUSH_DEFAULT_MATCHING;
+		else if (!strcmp(value, "tracking"))
+			push_default = PUSH_DEFAULT_TRACKING;
+		else if (!strcmp(value, "current"))
+			push_default = PUSH_DEFAULT_CURRENT;
+		else {
+			error("Malformed value for %s: %s", var, value);
+			return error("Must be one of nothing, matching, "
+				     "tracking or current.");
+		}
+		return 0;
+	}
+
+	/* Add other config variables here and to Documentation/config.txt. */
+	return 0;
+}
+
 static int git_default_mailmap_config(const char *var, const char *value)
 {
 	if (!strcmp(var, "mailmap.file"))
@@ -588,6 +613,9 @@ int git_default_config(const char *var, const char *value, void *dummy)
 	if (!prefixcmp(var, "branch."))
 		return git_default_branch_config(var, value);
 
+	if (!prefixcmp(var, "push."))
+		return git_default_push_config(var, value);
+
 	if (!prefixcmp(var, "mailmap."))
 		return git_default_mailmap_config(var, value);
 

contrib/completion/git-completion.bash

@@ -1103,7 +1103,7 @@ _git_log ()
 	local cur="${COMP_WORDS[COMP_CWORD]}"
 	local g="$(git rev-parse --git-dir 2>/dev/null)"
 	local merge=""
-	if [ -f $g/MERGE_HEAD ]; then
+	if [ -f "$g/MERGE_HEAD" ]; then
 		merge="--merge"
 	fi
 	case "$cur" in
@@ -1943,7 +1943,7 @@ _gitk ()
 	local cur="${COMP_WORDS[COMP_CWORD]}"
 	local g="$(__gitdir)"
 	local merge=""
-	if [ -f $g/MERGE_HEAD ]; then
+	if [ -f "$g/MERGE_HEAD" ]; then
 		merge="--merge"
 	fi
 	case "$cur" in

contrib/fast-import/import-zips.py

@@ -44,7 +44,8 @@ def printlines(list):
 			common_prefix = name[:name.rfind('/') + 1]
 		else:
 			while not name.startswith(common_prefix):
-				common_prefix = name[:name.rfind('/') + 1]
+				last_slash = common_prefix[:-1].rfind('/') + 1
+				common_prefix = common_prefix[:last_slash]
 
 		mark[name] = ':' + str(next_mark)
 		next_mark += 1

diff-no-index.c

@@ -205,8 +205,6 @@ void diff_no_index(struct rev_info *revs,
 		    no_index ? "--no-index" : "[--no-index]");
 
 	diff_setup(&revs->diffopt);
-	if (!revs->diffopt.output_format)
-		revs->diffopt.output_format = DIFF_FORMAT_PATCH;
 	for (i = 1; i < argc - 2; ) {
 		int j;
 		if (!strcmp(argv[i], "--no-index"))
@@ -252,6 +250,8 @@ void diff_no_index(struct rev_info *revs,
 		revs->diffopt.paths = argv + argc - 2;
 	revs->diffopt.nr_paths = 2;
 	revs->diffopt.skip_stat_unmatch = 1;
+	if (!revs->diffopt.output_format)
+		revs->diffopt.output_format = DIFF_FORMAT_PATCH;
 
 	DIFF_OPT_SET(&revs->diffopt, EXIT_WITH_STATUS);
 	DIFF_OPT_SET(&revs->diffopt, NO_INDEX);

diff.c

@@ -1757,7 +1757,8 @@ static int reuse_worktree_file(const char *name, const unsigned char *sha1, int
 	struct stat st;
 	int pos, len;
 
-	/* We do not read the cache ourselves here, because the
+	/*
+	 * We do not read the cache ourselves here, because the
 	 * benchmark with my previous version that always reads cache
 	 * shows that it makes things worse for diff-tree comparing
 	 * two linux-2.6 kernel trees in an already checked out work
@@ -1797,6 +1798,13 @@ static int reuse_worktree_file(const char *name, const unsigned char *sha1, int
 	if (hashcmp(sha1, ce->sha1) || !S_ISREG(ce->ce_mode))
 		return 0;
 
+	/*
+	 * If ce is marked as "assume unchanged", there is no
+	 * guarantee that work tree matches what we are looking for.
+	 */
+	if (ce->ce_flags & CE_VALID)
+		return 0;
+
 	/*
 	 * If ce matches the file in the work tree, we can reuse it.
 	 */
@@ -1946,17 +1954,23 @@ void diff_free_filespec_data(struct diff_filespec *s)
 	s->cnt_data = NULL;
 }
 
-static void prep_temp_blob(struct diff_tempfile *temp,
+static void prep_temp_blob(const char *path, struct diff_tempfile *temp,
 			   void *blob,
 			   unsigned long size,
 			   const unsigned char *sha1,
 			   int mode)
 {
 	int fd;
+	struct strbuf buf = STRBUF_INIT;
 
 	fd = git_mkstemp(temp->tmp_path, PATH_MAX, ".diff_XXXXXX");
 	if (fd < 0)
 		die("unable to create temp-file: %s", strerror(errno));
+	if (convert_to_working_tree(path,
+			(const char *)blob, (size_t)size, &buf)) {
+		blob = buf.buf;
+		size = buf.len;
+	}
 	if (write_in_full(fd, blob, size) != size)
 		die("unable to write temp-file");
 	close(fd);
@@ -1964,6 +1978,7 @@ static void prep_temp_blob(struct diff_tempfile *temp,
 	strcpy(temp->hex, sha1_to_hex(sha1));
 	temp->hex[40] = 0;
 	sprintf(temp->mode, "%06o", mode);
+	strbuf_release(&buf);
 }
 
 static struct diff_tempfile *prepare_temp_file(const char *name,
@@ -2004,7 +2019,7 @@ static struct diff_tempfile *prepare_temp_file(const char *name,
 				die("readlink(%s)", name);
 			if (ret == sizeof(buf))
 				die("symlink too long: %s", name);
-			prep_temp_blob(temp, buf, ret,
+			prep_temp_blob(name, temp, buf, ret,
 				       (one->sha1_valid ?
 					one->sha1 : null_sha1),
 				       (one->sha1_valid ?
@@ -2030,7 +2045,7 @@ static struct diff_tempfile *prepare_temp_file(const char *name,
 	else {
 		if (diff_populate_filespec(one, 0))
 			die("cannot read data blob for %s", one->path);
-		prep_temp_blob(temp, one->data, one->size,
+		prep_temp_blob(name, temp, one->data, one->size,
 			       one->sha1, one->mode);
 	}
 	return temp;

environment.c

@@ -42,6 +42,7 @@ enum safe_crlf safe_crlf = SAFE_CRLF_WARN;
 unsigned whitespace_rule_cfg = WS_DEFAULT_RULE;
 enum branch_track git_branch_track = BRANCH_TRACK_REMOTE;
 enum rebase_setup_type autorebase = AUTOREBASE_NEVER;
+enum push_default_type push_default = PUSH_DEFAULT_UNSPECIFIED;
 
 /* Parallel index stat data preload? */
 int core_preload_index = 0;

exec_cmd.c

@@ -61,6 +61,10 @@ const char *git_extract_argv0_path(const char *argv0)
 void git_set_argv_exec_path(const char *exec_path)
 {
 	argv_exec_path = exec_path;
+	/*
+	 * Propagate this setting to external programs.
+	 */
+	setenv(EXEC_PATH_ENVIRONMENT, exec_path, 1);
 }
 
 

fast-import.c

@@ -1,4 +1,5 @@
 /*
+(See Documentation/git-fast-import.txt for maintained documentation.)
 Format of STDIN stream:
 
   stream ::= cmd*;
@@ -18,8 +19,8 @@ Format of STDIN stream:
 
   new_commit ::= 'commit' sp ref_str lf
     mark?
-    ('author' sp name '<' email '>' when lf)?
-    'committer' sp name '<' email '>' when lf
+    ('author' sp name sp '<' email '>' sp when lf)?
+    'committer' sp name sp '<' email '>' sp when lf
     commit_msg
     ('from' sp (ref_str | hexsha1 | sha1exp_str | idnum) lf)?
     ('merge' sp (ref_str | hexsha1 | sha1exp_str | idnum) lf)*
@@ -43,7 +44,7 @@ Format of STDIN stream:
 
   new_tag ::= 'tag' sp tag_str lf
     'from' sp (ref_str | hexsha1 | sha1exp_str | idnum) lf
-    ('tagger' sp name '<' email '>' when lf)?
+    ('tagger' sp name sp '<' email '>' sp when lf)?
     tag_msg;
   tag_msg ::= data;
 

git-filter-branch.sh

@@ -272,10 +272,10 @@ test $commits -eq 0 && die "Found nothing to rewrite"
 
 # Rewrite the commits
 
-i=0
+git_filter_branch__commit_count=0
 while read commit parents; do
-	i=$(($i+1))
-	printf "\rRewrite $commit ($i/$commits)"
+	git_filter_branch__commit_count=$(($git_filter_branch__commit_count+1))
+	printf "\rRewrite $commit ($git_filter_branch__commit_count/$commits)"
 
 	case "$filter_subdir" in
 	"")

git-rebase.sh

@@ -319,7 +319,7 @@ do
 	--root)
 		rebase_root=t
 		;;
-	-f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force_rebas|--force-rebase)
+	-f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase)
 		force_rebase=t
 		;;
 	-*)

git-repack.sh

@@ -71,11 +71,7 @@ case ",$all_into_one," in
 				existing="$existing $e"
 			fi
 		done
-		if test -n "$existing"
-		then
-			args="--kept-pack-only"
-		fi
-		if test -n "$args" -a -n "$unpack_unreachable" -a \
+		if test -n "$existing" -a -n "$unpack_unreachable" -a \
 			-n "$remove_redundant"
 		then
 			args="$args $unpack_unreachable"

git-send-email.perl

@@ -606,32 +606,43 @@ ($)
 	do_edit(@files);
 }
 
+sub ask {
+	my ($prompt, %arg) = @_;
+	my $valid_re = $arg{valid_re} || ""; # "" matches anything
+	my $default = $arg{default};
+	my $resp;
+	my $i = 0;
+	return defined $default ? $default : undef
+		unless defined $term->IN and defined fileno($term->IN) and
+		       defined $term->OUT and defined fileno($term->OUT);
+	while ($i++ < 10) {
+		$resp = $term->readline($prompt);
+		if (!defined $resp) { # EOF
+			print "\n";
+			return defined $default ? $default : undef;
+		}
+		if ($resp eq '' and defined $default) {
+			return $default;
+		}
+		if ($resp =~ /$valid_re/) {
+			return $resp;
+		}
+	}
+	return undef;
+}
+
 my $prompting = 0;
 if (!defined $sender) {
 	$sender = $repoauthor || $repocommitter || '';
-
-	while (1) {
-		$_ = $term->readline("Who should the emails appear to be from? [$sender] ");
-		last if defined $_;
-		print "\n";
-	}
-
-	$sender = $_ if ($_);
+	$sender = ask("Who should the emails appear to be from? [$sender] ",
+	              default => $sender);
 	print "Emails will be sent from: ", $sender, "\n";
 	$prompting++;
 }
 
 if (!@to) {
-
-
-	while (1) {
-		$_ = $term->readline("Who should the emails be sent to? ", "");
-		last if defined $_;
-		print "\n";
-	}
-
-	my $to = $_;
-	push @to, parse_address_line($to);
+	my $to = ask("Who should the emails be sent to? ");
+	push @to, parse_address_line($to) if defined $to; # sanitized/validated later
 	$prompting++;
 }
 
@@ -651,13 +662,8 @@ sub expand_aliases {
 @bcclist = expand_aliases(@bcclist);
 
 if ($thread && !defined $initial_reply_to && $prompting) {
-	while (1) {
-		$_= $term->readline("Message-ID to be used as In-Reply-To for the first email? ", $initial_reply_to);
-		last if defined $_;
-		print "\n";
-	}
-
-	$initial_reply_to = $_;
+	$initial_reply_to = ask(
+		"Message-ID to be used as In-Reply-To for the first email? ");
 }
 if (defined $initial_reply_to) {
 	$initial_reply_to =~ s/^\s*<?//;
@@ -681,7 +687,7 @@ sub expand_aliases {
 
 # Variables we set as part of the loop over files
 our ($message_id, %mail, $subject, $reply_to, $references, $message,
-	$needs_confirm, $message_num);
+	$needs_confirm, $message_num, $ask_default);
 
 sub extract_valid_address {
 	my $address = shift;
@@ -770,12 +776,13 @@ sub sanitize_address
 	}
 
 	# if recipient_name is already quoted, do nothing
-	if ($recipient_name =~ /^(".*"|=\?utf-8\?q\?.*\?=)$/) {
+	if ($recipient_name =~ /^("[[:ascii:]]*"|=\?utf-8\?q\?.*\?=)$/) {
 		return $recipient;
 	}
 
 	# rfc2047 is needed if a non-ascii char is included
 	if ($recipient_name =~ /[^[:ascii:]]/) {
+		$recipient_name =~ s/^"(.*)"$/$1/;
 		$recipient_name = quote_rfc2047($recipient_name);
 	}
 
@@ -841,6 +848,7 @@ sub send_message
 		print "\n$header\n";
 		if ($needs_confirm eq "inform") {
 			$confirm_unconfigured = 0; # squelch this message for the rest of this run
+			$ask_default = "y"; # assume yes on EOF since user hasn't explicitly asked for confirmation
 			print "    The Cc list above has been expanded by additional\n";
 			print "    addresses found in the patch commit message. By default\n";
 			print "    send-email prompts before sending whenever this occurs.\n";
@@ -851,13 +859,10 @@ sub send_message
 			print "    To retain the current behavior, but squelch this message,\n";
 			print "    run 'git config --global sendemail.confirm auto'.\n\n";
 		}
-		while (1) {
-			chomp ($_ = $term->readline(
-				"Send this email? ([y]es|[n]o|[q]uit|[a]ll): "
-			));
-			last if /^(?:yes|y|no|n|quit|q|all|a)/i;
-			print "\n";
-		}
+		$_ = ask("Send this email? ([y]es|[n]o|[q]uit|[a]ll): ",
+		         valid_re => qr/^(?:yes|y|no|n|quit|q|all|a)/i,
+		         default => $ask_default);
+		die "Send this email reply required" unless defined $_;
 		if (/^n/i) {
 			return;
 		} elsif (/^q/i) {

git-svn.perl

@@ -68,6 +68,7 @@ BEGIN
 	$_prefix, $_no_checkout, $_url, $_verbose,
 	$_git_format, $_commit_url, $_tag);
 $Git::SVN::_follow_parent = 1;
+$_q ||= 0;
 my %remote_opts = ( 'username=s' => \$Git::SVN::Prompt::_username,
                     'config-dir=s' => \$Git::SVN::Ra::config_dir,
                     'no-auth-cache' => \$Git::SVN::Prompt::_no_auth_cache,
@@ -80,7 +81,7 @@ BEGIN
 		'useSvnsyncProps' => \$Git::SVN::_use_svnsync_props,
 		'log-window-size=i' => \$Git::SVN::Ra::_log_window_size,
 		'no-checkout' => \$_no_checkout,
-		'quiet|q' => \$_q,
+		'quiet|q+' => \$_q,
 		'repack-flags|repack-args|repack-opts=s' =>
 		   \$Git::SVN::_repack_flags,
 		'use-log-author' => \$Git::SVN::_use_log_author,
@@ -2331,13 +2332,13 @@ sub do_git_commit {
 
 	$self->{last_rev} = $log_entry->{revision};
 	$self->{last_commit} = $commit;
-	print "r$log_entry->{revision}";
+	print "r$log_entry->{revision}" unless $::_q > 1;
 	if (defined $log_entry->{svm_revision}) {
-		 print " (\@$log_entry->{svm_revision})";
+		 print " (\@$log_entry->{svm_revision})" unless $::_q > 1;
 		 $self->rev_map_set($log_entry->{svm_revision}, $commit,
 		                   0, $self->svm_uuid);
 	}
-	print " = $commit ($self->{ref_id})\n";
+	print " = $commit ($self->{ref_id})\n" unless $::_q > 1;
 	if (--$_gc_nr == 0) {
 		$_gc_nr = $_gc_period;
 		gc();
@@ -3387,15 +3388,18 @@ sub delete_entry {
 	return undef if ($gpath eq '');
 
 	# remove entire directories.
-	if (command('ls-tree', $self->{c}, '--', $gpath) =~ /^040000 tree/) {
+	my ($tree) = (command('ls-tree', '-z', $self->{c}, "./$gpath")
+	                 =~ /\A040000 tree ([a-f\d]{40})\t\Q$gpath\E\0/);
+	if ($tree) {
 		my ($ls, $ctx) = command_output_pipe(qw/ls-tree
 		                                     -r --name-only -z/,
-				                     $self->{c}, '--', $gpath);
+				                     $tree);
 		local $/ = "\0";
 		while (<$ls>) {
 			chomp;
-			$self->{gii}->remove($_);
-			print "\tD\t$_\n" unless $::_q;
+			my $rmpath = "$gpath/$_";
+			$self->{gii}->remove($rmpath);
+			print "\tD\t$rmpath\n" unless $::_q;
 		}
 		print "\tD\t$gpath/\n" unless $::_q;
 		command_close_pipe($ls, $ctx);
@@ -3414,8 +3418,8 @@ sub open_file {
 	goto out if is_path_ignored($path);
 
 	my $gpath = $self->git_path($path);
-	($mode, $blob) = (command('ls-tree', $self->{c}, '--', $gpath)
-	                     =~ /^(\d{6}) blob ([a-f\d]{40})\t/);
+	($mode, $blob) = (command('ls-tree', '-z', $self->{c}, "./$gpath")
+	                     =~ /\A(\d{6}) blob ([a-f\d]{40})\t\Q$gpath\E\0/);
 	unless (defined $mode && defined $blob) {
 		die "$path was not found in commit $self->{c} (r$rev)\n";
 	}

http-push.c

@@ -97,7 +97,7 @@ struct repo
 	struct remote_lock *locks;
 };
 
-static struct repo *remote;
+static struct repo *repo;
 
 enum transfer_state {
 	NEED_FETCH,
@@ -324,7 +324,7 @@ static void start_fetch_loose(struct transfer_request *request)
 
 	git_SHA1_Init(&request->c);
 
-	url = get_remote_object_url(remote->url, hex, 0);
+	url = get_remote_object_url(repo->url, hex, 0);
 	request->url = xstrdup(url);
 
 	/* If a previous temp file is present, process what was already
@@ -389,7 +389,7 @@ static void start_fetch_loose(struct transfer_request *request)
 	request->state = RUN_FETCH_LOOSE;
 	if (!start_active_slot(slot)) {
 		fprintf(stderr, "Unable to start GET request\n");
-		remote->can_update_info_refs = 0;
+		repo->can_update_info_refs = 0;
 		release_request(request);
 	}
 }
@@ -399,7 +399,7 @@ static void start_mkcol(struct transfer_request *request)
 	char *hex = sha1_to_hex(request->obj->sha1);
 	struct active_request_slot *slot;
 
-	request->url = get_remote_object_url(remote->url, hex, 1);
+	request->url = get_remote_object_url(repo->url, hex, 1);
 
 	slot = get_active_slot();
 	slot->callback_func = process_response;
@@ -434,10 +434,10 @@ static void start_fetch_packed(struct transfer_request *request)
 	struct transfer_request *check_request = request_queue_head;
 	struct active_request_slot *slot;
 
-	target = find_sha1_pack(request->obj->sha1, remote->packs);
+	target = find_sha1_pack(request->obj->sha1, repo->packs);
 	if (!target) {
 		fprintf(stderr, "Unable to fetch %s, will not be able to update server info refs\n", sha1_to_hex(request->obj->sha1));
-		remote->can_update_info_refs = 0;
+		repo->can_update_info_refs = 0;
 		release_request(request);
 		return;
 	}
@@ -450,9 +450,9 @@ static void start_fetch_packed(struct transfer_request *request)
 	snprintf(request->tmpfile, sizeof(request->tmpfile),
 		 "%s.temp", filename);
 
-	url = xmalloc(strlen(remote->url) + 64);
+	url = xmalloc(strlen(repo->url) + 64);
 	sprintf(url, "%sobjects/pack/pack-%s.pack",
-		remote->url, sha1_to_hex(target->sha1));
+		repo->url, sha1_to_hex(target->sha1));
 
 	/* Make sure there isn't another open request for this pack */
 	while (check_request) {
@@ -469,7 +469,7 @@ static void start_fetch_packed(struct transfer_request *request)
 	if (!packfile) {
 		fprintf(stderr, "Unable to open local file %s for pack",
 			request->tmpfile);
-		remote->can_update_info_refs = 0;
+		repo->can_update_info_refs = 0;
 		free(url);
 		return;
 	}
@@ -505,7 +505,7 @@ static void start_fetch_packed(struct transfer_request *request)
 	request->state = RUN_FETCH_PACKED;
 	if (!start_active_slot(slot)) {
 		fprintf(stderr, "Unable to start GET request\n");
-		remote->can_update_info_refs = 0;
+		repo->can_update_info_refs = 0;
 		release_request(request);
 	}
 }
@@ -554,10 +554,10 @@ static void start_put(struct transfer_request *request)
 	request->buffer.buf.len = stream.total_out;
 
 	strbuf_addstr(&buf, "Destination: ");
-	append_remote_object_url(&buf, remote->url, hex, 0);
+	append_remote_object_url(&buf, repo->url, hex, 0);
 	request->dest = strbuf_detach(&buf, NULL);
 
-	append_remote_object_url(&buf, remote->url, hex, 0);
+	append_remote_object_url(&buf, repo->url, hex, 0);
 	strbuf_add(&buf, request->lock->tmpfile_suffix, 41);
 	request->url = strbuf_detach(&buf, NULL);
 
@@ -648,7 +648,7 @@ static int refresh_lock(struct remote_lock *lock)
 
 static void check_locks(void)
 {
-	struct remote_lock *lock = remote->locks;
+	struct remote_lock *lock = repo->locks;
 	time_t current_time = time(NULL);
 	int time_remaining;
 
@@ -788,7 +788,7 @@ static void finish_request(struct transfer_request *request)
 		if (request->curl_result != CURLE_OK) {
 			fprintf(stderr, "Unable to get pack file %s\n%s",
 				request->url, curl_errorstr);
-			remote->can_update_info_refs = 0;
+			repo->can_update_info_refs = 0;
 		} else {
 			off_t pack_size = ftell(request->local_stream);
 
@@ -798,7 +798,7 @@ static void finish_request(struct transfer_request *request)
 					       request->filename)) {
 				target = (struct packed_git *)request->userData;
 				target->pack_size = pack_size;
-				lst = &remote->packs;
+				lst = &repo->packs;
 				while (*lst != target)
 					lst = &((*lst)->next);
 				*lst = (*lst)->next;
@@ -806,7 +806,7 @@ static void finish_request(struct transfer_request *request)
 				if (!verify_pack(target))
 					install_packed_git(target);
 				else
-					remote->can_update_info_refs = 0;
+					repo->can_update_info_refs = 0;
 			}
 		}
 		release_request(request);
@@ -889,7 +889,7 @@ static int add_send_request(struct object *obj, struct remote_lock *lock)
 		get_remote_object_list(obj->sha1[0]);
 	if (obj->flags & (REMOTE | PUSHING))
 		return 0;
-	target = find_sha1_pack(obj->sha1, remote->packs);
+	target = find_sha1_pack(obj->sha1, repo->packs);
 	if (target) {
 		obj->flags |= REMOTE;
 		return 0;
@@ -930,8 +930,8 @@ static int fetch_index(unsigned char *sha1)
 	struct slot_results results;
 
 	/* Don't use the index if the pack isn't there */
-	url = xmalloc(strlen(remote->url) + 64);
-	sprintf(url, "%sobjects/pack/pack-%s.pack", remote->url, hex);
+	url = xmalloc(strlen(repo->url) + 64);
+	sprintf(url, "%sobjects/pack/pack-%s.pack", repo->url, hex);
 	slot = get_active_slot();
 	slot->results = &results;
 	curl_easy_setopt(slot->curl, CURLOPT_URL, url);
@@ -956,7 +956,7 @@ static int fetch_index(unsigned char *sha1)
 	if (push_verbosely)
 		fprintf(stderr, "Getting index for pack %s\n", hex);
 
-	sprintf(url, "%sobjects/pack/pack-%s.idx", remote->url, hex);
+	sprintf(url, "%sobjects/pack/pack-%s.idx", repo->url, hex);
 
 	filename = sha1_pack_index_name(sha1);
 	snprintf(tmpfile, sizeof(tmpfile), "%s.temp", filename);
@@ -1018,8 +1018,8 @@ static int setup_index(unsigned char *sha1)
 		return -1;
 
 	new_pack = parse_pack_index(sha1);
-	new_pack->next = remote->packs;
-	remote->packs = new_pack;
+	new_pack->next = repo->packs;
+	repo->packs = new_pack;
 	return 0;
 }
 
@@ -1037,8 +1037,8 @@ static int fetch_indices(void)
 	if (push_verbosely)
 		fprintf(stderr, "Getting pack list\n");
 
-	url = xmalloc(strlen(remote->url) + 20);
-	sprintf(url, "%sobjects/info/packs", remote->url);
+	url = xmalloc(strlen(repo->url) + 20);
+	sprintf(url, "%sobjects/info/packs", repo->url);
 
 	slot = get_active_slot();
 	slot->results = &results;
@@ -1223,11 +1223,11 @@ static struct remote_lock *lock_remote(const char *path, long timeout)
 	struct curl_slist *dav_headers = NULL;
 	struct xml_ctx ctx;
 
-	url = xmalloc(strlen(remote->url) + strlen(path) + 1);
-	sprintf(url, "%s%s", remote->url, path);
+	url = xmalloc(strlen(repo->url) + strlen(path) + 1);
+	sprintf(url, "%s%s", repo->url, path);
 
 	/* Make sure leading directories exist for the remote ref */
-	ep = strchr(url + strlen(remote->url) + 1, '/');
+	ep = strchr(url + strlen(repo->url) + 1, '/');
 	while (ep) {
 		char saved_character = ep[1];
 		ep[1] = '\0';
@@ -1319,8 +1319,8 @@ static struct remote_lock *lock_remote(const char *path, long timeout)
 	} else {
 		lock->url = url;
 		lock->start_time = time(NULL);
-		lock->next = remote->locks;
-		remote->locks = lock;
+		lock->next = repo->locks;
+		repo->locks = lock;
 	}
 
 	return lock;
@@ -1330,7 +1330,7 @@ static int unlock_remote(struct remote_lock *lock)
 {
 	struct active_request_slot *slot;
 	struct slot_results results;
-	struct remote_lock *prev = remote->locks;
+	struct remote_lock *prev = repo->locks;
 	struct curl_slist *dav_headers;
 	int rc = 0;
 
@@ -1356,8 +1356,8 @@ static int unlock_remote(struct remote_lock *lock)
 
 	curl_slist_free_all(dav_headers);
 
-	if (remote->locks == lock) {
-		remote->locks = lock->next;
+	if (repo->locks == lock) {
+		repo->locks = lock->next;
 	} else {
 		while (prev && prev->next != lock)
 			prev = prev->next;
@@ -1375,7 +1375,7 @@ static int unlock_remote(struct remote_lock *lock)
 
 static void remove_locks(void)
 {
-	struct remote_lock *lock = remote->locks;
+	struct remote_lock *lock = repo->locks;
 
 	fprintf(stderr, "Removing remote locks...\n");
 	while (lock) {
@@ -1457,7 +1457,7 @@ static void handle_remote_ls_ctx(struct xml_ctx *ctx, int tag_closed)
 				}
 			}
 			if (path) {
-				path += remote->path_len;
+				path += repo->path_len;
 				ls->dentry_name = xstrdup(path);
 			}
 		} else if (!strcmp(ctx->name, DAV_PROPFIND_COLLECTION)) {
@@ -1480,7 +1480,7 @@ static void remote_ls(const char *path, int flags,
 		      void (*userFunc)(struct remote_ls_ctx *ls),
 		      void *userData)
 {
-	char *url = xmalloc(strlen(remote->url) + strlen(path) + 1);
+	char *url = xmalloc(strlen(repo->url) + strlen(path) + 1);
 	struct active_request_slot *slot;
 	struct slot_results results;
 	struct strbuf in_buffer = STRBUF_INIT;
@@ -1496,7 +1496,7 @@ static void remote_ls(const char *path, int flags,
 	ls.userData = userData;
 	ls.userFunc = userFunc;
 
-	sprintf(url, "%s%s", remote->url, path);
+	sprintf(url, "%s%s", repo->url, path);
 
 	strbuf_addf(&out_buffer.buf, PROPFIND_ALL_REQUEST);
 
@@ -1574,7 +1574,7 @@ static int locking_available(void)
 	struct xml_ctx ctx;
 	int lock_flags = 0;
 
-	strbuf_addf(&out_buffer.buf, PROPFIND_SUPPORTEDLOCK_REQUEST, remote->url);
+	strbuf_addf(&out_buffer.buf, PROPFIND_SUPPORTEDLOCK_REQUEST, repo->url);
 
 	dav_headers = curl_slist_append(dav_headers, "Depth: 0");
 	dav_headers = curl_slist_append(dav_headers, "Content-Type: text/xml");
@@ -1586,7 +1586,7 @@ static int locking_available(void)
 	curl_easy_setopt(slot->curl, CURLOPT_READFUNCTION, fread_buffer);
 	curl_easy_setopt(slot->curl, CURLOPT_FILE, &in_buffer);
 	curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION, fwrite_buffer);
-	curl_easy_setopt(slot->curl, CURLOPT_URL, remote->url);
+	curl_easy_setopt(slot->curl, CURLOPT_URL, repo->url);
 	curl_easy_setopt(slot->curl, CURLOPT_UPLOAD, 1);
 	curl_easy_setopt(slot->curl, CURLOPT_CUSTOMREQUEST, DAV_PROPFIND);
 	curl_easy_setopt(slot->curl, CURLOPT_HTTPHEADER, dav_headers);
@@ -1617,15 +1617,15 @@ static int locking_available(void)
 			XML_ParserFree(parser);
 			if (!lock_flags)
 				error("no DAV locking support on %s",
-				      remote->url);
+				      repo->url);
 
 		} else {
 			error("Cannot access URL %s, return code %d",
-			      remote->url, results.curl_result);
+			      repo->url, results.curl_result);
 			lock_flags = 0;
 		}
 	} else {
-		error("Unable to start PROPFIND request on %s", remote->url);
+		error("Unable to start PROPFIND request on %s", repo->url);
 	}
 
 	strbuf_release(&out_buffer.buf);
@@ -1801,10 +1801,10 @@ static void one_remote_ref(char *refname)
 
 	ref = alloc_ref(refname);
 
-	if (http_fetch_ref(remote->url, ref) != 0) {
+	if (http_fetch_ref(repo->url, ref) != 0) {
 		fprintf(stderr,
 			"Unable to fetch ref %s from %s\n",
-			refname, remote->url);
+			refname, repo->url);
 		free(ref);
 		return;
 	}
@@ -1813,7 +1813,7 @@ static void one_remote_ref(char *refname)
 	 * Fetch a copy of the object if it doesn't exist locally - it
 	 * may be required for updating server info later.
 	 */
-	if (remote->can_update_info_refs && !has_sha1_file(ref->old_sha1)) {
+	if (repo->can_update_info_refs && !has_sha1_file(ref->old_sha1)) {
 		obj = lookup_unknown_object(ref->old_sha1);
 		if (obj) {
 			fprintf(stderr,	"  fetch %s for %s\n",
@@ -1853,10 +1853,10 @@ static void add_remote_info_ref(struct remote_ls_ctx *ls)
 
 	ref = alloc_ref(ls->dentry_name);
 
-	if (http_fetch_ref(remote->url, ref) != 0) {
+	if (http_fetch_ref(repo->url, ref) != 0) {
 		fprintf(stderr,
 			"Unable to fetch ref %s from %s\n",
-			ls->dentry_name, remote->url);
+			ls->dentry_name, repo->url);
 		aborted = 1;
 		free(ref);
 		return;
@@ -1931,12 +1931,12 @@ static void update_remote_info_refs(struct remote_lock *lock)
 
 static int remote_exists(const char *path)
 {
-	char *url = xmalloc(strlen(remote->url) + strlen(path) + 1);
+	char *url = xmalloc(strlen(repo->url) + strlen(path) + 1);
 	struct active_request_slot *slot;
 	struct slot_results results;
 	int ret = -1;
 
-	sprintf(url, "%s%s", remote->url, path);
+	sprintf(url, "%s%s", repo->url, path);
 
 	slot = get_active_slot();
 	slot->results = &results;
@@ -1966,8 +1966,8 @@ static void fetch_symref(const char *path, char **symref, unsigned char *sha1)
 	struct active_request_slot *slot;
 	struct slot_results results;
 
-	url = xmalloc(strlen(remote->url) + strlen(path) + 1);
-	sprintf(url, "%s%s", remote->url, path);
+	url = xmalloc(strlen(repo->url) + strlen(path) + 1);
+	sprintf(url, "%s%s", repo->url, path);
 
 	slot = get_active_slot();
 	slot->results = &results;
@@ -2082,7 +2082,7 @@ static int delete_remote_branch(char *pattern, int force)
 				     "of your current HEAD.\n"
 				     "If you are sure you want to delete it,"
 				     " run:\n\t'git http-push -D %s %s'",
-				     remote_ref->name, remote->url, pattern);
+				     remote_ref->name, repo->url, pattern);
 		}
 	}
 
@@ -2090,8 +2090,8 @@ static int delete_remote_branch(char *pattern, int force)
 	fprintf(stderr, "Removing remote branch '%s'\n", remote_ref->name);
 	if (dry_run)
 		return 0;
-	url = xmalloc(strlen(remote->url) + strlen(remote_ref->name) + 1);
-	sprintf(url, "%s%s", remote->url, remote_ref->name);
+	url = xmalloc(strlen(repo->url) + strlen(remote_ref->name) + 1);
+	sprintf(url, "%s%s", repo->url, remote_ref->name);
 	slot = get_active_slot();
 	slot->results = &results;
 	curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1);
@@ -2128,13 +2128,14 @@ int main(int argc, char **argv)
 	int i;
 	int new_refs;
 	struct ref *ref, *local_refs;
+	struct remote *remote;
 	char *rewritten_url = NULL;
 
 	git_extract_argv0_path(argv[0]);
 
 	setup_git_directory();
 
-	remote = xcalloc(sizeof(*remote), 1);
+	repo = xcalloc(sizeof(*repo), 1);
 
 	argv++;
 	for (i = 1; i < argc; i++, argv++) {
@@ -2167,14 +2168,14 @@ int main(int argc, char **argv)
 				continue;
 			}
 		}
-		if (!remote->url) {
+		if (!repo->url) {
 			char *path = strstr(arg, "//");
-			remote->url = arg;
-			remote->path_len = strlen(arg);
+			repo->url = arg;
+			repo->path_len = strlen(arg);
 			if (path) {
-				remote->path = strchr(path+2, '/');
-				if (remote->path)
-					remote->path_len = strlen(remote->path);
+				repo->path = strchr(path+2, '/');
+				if (repo->path)
+					repo->path_len = strlen(repo->path);
 			}
 			continue;
 		}
@@ -2187,7 +2188,7 @@ int main(int argc, char **argv)
 	die("git-push is not available for http/https repository when not compiled with USE_CURL_MULTI");
 #endif
 
-	if (!remote->url)
+	if (!repo->url)
 		usage(http_push_usage);
 
 	if (delete_branch && nr_refspec != 1)
@@ -2195,17 +2196,24 @@ int main(int argc, char **argv)
 
 	memset(remote_dir_exists, -1, 256);
 
-	http_init(NULL);
+	/*
+	 * Create a minimum remote by hand to give to http_init(),
+	 * primarily to allow it to look at the URL.
+	 */
+	remote = xcalloc(sizeof(*remote), 1);
+	ALLOC_GROW(remote->url, remote->url_nr + 1, remote->url_alloc);
+	remote->url[remote->url_nr++] = repo->url;
+	http_init(remote);
 
 	no_pragma_header = curl_slist_append(no_pragma_header, "Pragma:");
 
-	if (remote->url && remote->url[strlen(remote->url)-1] != '/') {
-		rewritten_url = xmalloc(strlen(remote->url)+2);
-		strcpy(rewritten_url, remote->url);
+	if (repo->url && repo->url[strlen(repo->url)-1] != '/') {
+		rewritten_url = xmalloc(strlen(repo->url)+2);
+		strcpy(rewritten_url, repo->url);
 		strcat(rewritten_url, "/");
-		remote->path = rewritten_url + (remote->path - remote->url);
-		remote->path_len++;
-		remote->url = rewritten_url;
+		repo->path = rewritten_url + (repo->path - repo->url);
+		repo->path_len++;
+		repo->url = rewritten_url;
 	}
 
 	/* Verify DAV compliance/lock support */
@@ -2217,20 +2225,20 @@ int main(int argc, char **argv)
 	sigchain_push_common(remove_locks_on_signal);
 
 	/* Check whether the remote has server info files */
-	remote->can_update_info_refs = 0;
-	remote->has_info_refs = remote_exists("info/refs");
-	remote->has_info_packs = remote_exists("objects/info/packs");
-	if (remote->has_info_refs) {
+	repo->can_update_info_refs = 0;
+	repo->has_info_refs = remote_exists("info/refs");
+	repo->has_info_packs = remote_exists("objects/info/packs");
+	if (repo->has_info_refs) {
 		info_ref_lock = lock_remote("info/refs", LOCK_TIME);
 		if (info_ref_lock)
-			remote->can_update_info_refs = 1;
+			repo->can_update_info_refs = 1;
 		else {
 			error("cannot lock existing info/refs");
 			rc = 1;
 			goto cleanup;
 		}
 	}
-	if (remote->has_info_packs)
+	if (repo->has_info_packs)
 		fetch_indices();
 
 	/* Get a list of all local and remote heads to validate refspecs */
@@ -2388,8 +2396,8 @@ int main(int argc, char **argv)
 	}
 
 	/* Update remote server info if appropriate */
-	if (remote->has_info_refs && new_refs) {
-		if (info_ref_lock && remote->can_update_info_refs) {
+	if (repo->has_info_refs && new_refs) {
+		if (info_ref_lock && repo->can_update_info_refs) {
 			fprintf(stderr, "Updating remote server info\n");
 			if (!dry_run)
 				update_remote_info_refs(info_ref_lock);
@@ -2402,7 +2410,7 @@ int main(int argc, char **argv)
 	free(rewritten_url);
 	if (info_ref_lock)
 		unlock_remote(info_ref_lock);
-	free(remote);
+	free(repo);
 
 	curl_slist_free_all(no_pragma_header);
 

http.c

@@ -1,7 +1,7 @@
 #include "http.h"
 
 int data_received;
-int active_requests = 0;
+int active_requests;
 
 #ifdef USE_CURL_MULTI
 static int max_requests = -1;
@@ -13,22 +13,23 @@ static CURL *curl_default;
 char curl_errorstr[CURL_ERROR_SIZE];
 
 static int curl_ssl_verify = -1;
-static const char *ssl_cert = NULL;
+static const char *ssl_cert;
 #if LIBCURL_VERSION_NUM >= 0x070902
-static const char *ssl_key = NULL;
+static const char *ssl_key;
 #endif
 #if LIBCURL_VERSION_NUM >= 0x070908
-static const char *ssl_capath = NULL;
+static const char *ssl_capath;
 #endif
-static const char *ssl_cainfo = NULL;
+static const char *ssl_cainfo;
 static long curl_low_speed_limit = -1;
 static long curl_low_speed_time = -1;
-static int curl_ftp_no_epsv = 0;
-static const char *curl_http_proxy = NULL;
+static int curl_ftp_no_epsv;
+static const char *curl_http_proxy;
+static char *user_name, *user_pass;
 
 static struct curl_slist *pragma_header;
 
-static struct active_request_slot *active_queue_head = NULL;
+static struct active_request_slot *active_queue_head;
 
 size_t fread_buffer(void *ptr, size_t eltsize, size_t nmemb, void *buffer_)
 {
@@ -94,53 +95,33 @@ static void process_curl_messages(void)
 static int http_options(const char *var, const char *value, void *cb)
 {
 	if (!strcmp("http.sslverify", var)) {
-		if (curl_ssl_verify == -1) {
-			curl_ssl_verify = git_config_bool(var, value);
-		}
-		return 0;
-	}
-
-	if (!strcmp("http.sslcert", var)) {
-		if (ssl_cert == NULL)
-			return git_config_string(&ssl_cert, var, value);
+		curl_ssl_verify = git_config_bool(var, value);
 		return 0;
 	}
+	if (!strcmp("http.sslcert", var))
+		return git_config_string(&ssl_cert, var, value);
 #if LIBCURL_VERSION_NUM >= 0x070902
-	if (!strcmp("http.sslkey", var)) {
-		if (ssl_key == NULL)
-			return git_config_string(&ssl_key, var, value);
-		return 0;
-	}
+	if (!strcmp("http.sslkey", var))
+		return git_config_string(&ssl_key, var, value);
 #endif
 #if LIBCURL_VERSION_NUM >= 0x070908
-	if (!strcmp("http.sslcapath", var)) {
-		if (ssl_capath == NULL)
-			return git_config_string(&ssl_capath, var, value);
-		return 0;
-	}
+	if (!strcmp("http.sslcapath", var))
+		return git_config_string(&ssl_capath, var, value);
 #endif
-	if (!strcmp("http.sslcainfo", var)) {
-		if (ssl_cainfo == NULL)
-			return git_config_string(&ssl_cainfo, var, value);
-		return 0;
-	}
-
+	if (!strcmp("http.sslcainfo", var))
+		return git_config_string(&ssl_cainfo, var, value);
 #ifdef USE_CURL_MULTI
 	if (!strcmp("http.maxrequests", var)) {
-		if (max_requests == -1)
-			max_requests = git_config_int(var, value);
+		max_requests = git_config_int(var, value);
 		return 0;
 	}
 #endif
-
 	if (!strcmp("http.lowspeedlimit", var)) {
-		if (curl_low_speed_limit == -1)
-			curl_low_speed_limit = (long)git_config_int(var, value);
+		curl_low_speed_limit = (long)git_config_int(var, value);
 		return 0;
 	}
 	if (!strcmp("http.lowspeedtime", var)) {
-		if (curl_low_speed_time == -1)
-			curl_low_speed_time = (long)git_config_int(var, value);
+		curl_low_speed_time = (long)git_config_int(var, value);
 		return 0;
 	}
 
@@ -148,19 +129,28 @@ static int http_options(const char *var, const char *value, void *cb)
 		curl_ftp_no_epsv = git_config_bool(var, value);
 		return 0;
 	}
-	if (!strcmp("http.proxy", var)) {
-		if (curl_http_proxy == NULL)
-			return git_config_string(&curl_http_proxy, var, value);
-		return 0;
-	}
+	if (!strcmp("http.proxy", var))
+		return git_config_string(&curl_http_proxy, var, value);
 
 	/* Fall back on the default ones */
 	return git_default_config(var, value, cb);
 }
 
-static CURL* get_curl_handle(void)
+static void init_curl_http_auth(CURL *result)
 {
-	CURL* result = curl_easy_init();
+	if (user_name) {
+		struct strbuf up = STRBUF_INIT;
+		if (!user_pass)
+			user_pass = xstrdup(getpass("Password: "));
+		strbuf_addf(&up, "%s:%s", user_name, user_pass);
+		curl_easy_setopt(result, CURLOPT_USERPWD,
+				 strbuf_detach(&up, NULL));
+	}
+}
+
+static CURL *get_curl_handle(void)
+{
+	CURL *result = curl_easy_init();
 
 	if (!curl_ssl_verify) {
 		curl_easy_setopt(result, CURLOPT_SSL_VERIFYPEER, 0);
@@ -176,6 +166,8 @@ static CURL* get_curl_handle(void)
 	curl_easy_setopt(result, CURLOPT_NETRC, CURL_NETRC_OPTIONAL);
 #endif
 
+	init_curl_http_auth(result);
+
 	if (ssl_cert != NULL)
 		curl_easy_setopt(result, CURLOPT_SSLCERT, ssl_cert);
 #if LIBCURL_VERSION_NUM >= 0x070902
@@ -213,11 +205,60 @@ static CURL* get_curl_handle(void)
 	return result;
 }
 
+static void http_auth_init(const char *url)
+{
+	char *at, *colon, *cp, *slash;
+	int len;
+
+	cp = strstr(url, "://");
+	if (!cp)
+		return;
+
+	/*
+	 * Ok, the URL looks like "proto://something".  Which one?
+	 * "proto://<user>:<pass>@<host>/...",
+	 * "proto://<user>@<host>/...", or just
+	 * "proto://<host>/..."?
+	 */
+	cp += 3;
+	at = strchr(cp, '@');
+	colon = strchr(cp, ':');
+	slash = strchrnul(cp, '/');
+	if (!at || slash <= at)
+		return; /* No credentials */
+	if (!colon || at <= colon) {
+		/* Only username */
+		len = at - cp;
+		user_name = xmalloc(len + 1);
+		memcpy(user_name, cp, len);
+		user_name[len] = '\0';
+		user_pass = NULL;
+	} else {
+		len = colon - cp;
+		user_name = xmalloc(len + 1);
+		memcpy(user_name, cp, len);
+		user_name[len] = '\0';
+		len = at - (colon + 1);
+		user_pass = xmalloc(len + 1);
+		memcpy(user_pass, colon + 1, len);
+		user_pass[len] = '\0';
+	}
+}
+
+static void set_from_env(const char **var, const char *envname)
+{
+	const char *val = getenv(envname);
+	if (val)
+		*var = val;
+}
+
 void http_init(struct remote *remote)
 {
 	char *low_speed_limit;
 	char *low_speed_time;
 
+	git_config(http_options, NULL);
+
 	curl_global_init(CURL_GLOBAL_ALL);
 
 	if (remote && remote->http_proxy)
@@ -242,14 +283,14 @@ void http_init(struct remote *remote)
 	if (getenv("GIT_SSL_NO_VERIFY"))
 		curl_ssl_verify = 0;
 
-	ssl_cert = getenv("GIT_SSL_CERT");
+	set_from_env(&ssl_cert, "GIT_SSL_CERT");
 #if LIBCURL_VERSION_NUM >= 0x070902
-	ssl_key = getenv("GIT_SSL_KEY");
+	set_from_env(&ssl_key, "GIT_SSL_KEY");
 #endif
 #if LIBCURL_VERSION_NUM >= 0x070908
-	ssl_capath = getenv("GIT_SSL_CAPATH");
+	set_from_env(&ssl_capath, "GIT_SSL_CAPATH");
 #endif
-	ssl_cainfo = getenv("GIT_SSL_CAINFO");
+	set_from_env(&ssl_cainfo, "GIT_SSL_CAINFO");
 
 	low_speed_limit = getenv("GIT_HTTP_LOW_SPEED_LIMIT");
 	if (low_speed_limit != NULL)
@@ -258,8 +299,6 @@ void http_init(struct remote *remote)
 	if (low_speed_time != NULL)
 		curl_low_speed_time = strtol(low_speed_time, NULL, 10);
 
-	git_config(http_options, NULL);
-
 	if (curl_ssl_verify == -1)
 		curl_ssl_verify = 1;
 
@@ -271,6 +310,9 @@ void http_init(struct remote *remote)
 	if (getenv("GIT_CURL_FTP_NO_EPSV"))
 		curl_ftp_no_epsv = 1;
 
+	if (remote && remote->url && remote->url[0])
+		http_auth_init(remote->url[0]);
+
 #ifndef NO_CURL_EASY_DUPHANDLE
 	curl_default = get_curl_handle();
 #endif
@@ -322,15 +364,14 @@ struct active_request_slot *get_active_slot(void)
 	/* Wait for a slot to open up if the queue is full */
 	while (active_requests >= max_requests) {
 		curl_multi_perform(curlm, &num_transfers);
-		if (num_transfers < active_requests) {
+		if (num_transfers < active_requests)
 			process_curl_messages();
-		}
 	}
 #endif
 
-	while (slot != NULL && slot->in_use) {
+	while (slot != NULL && slot->in_use)
 		slot = slot->next;
-	}
+
 	if (slot == NULL) {
 		newslot = xmalloc(sizeof(*newslot));
 		newslot->curl = NULL;
@@ -341,9 +382,8 @@ struct active_request_slot *get_active_slot(void)
 		if (slot == NULL) {
 			active_queue_head = newslot;
 		} else {
-			while (slot->next != NULL) {
+			while (slot->next != NULL)
 				slot = slot->next;
-			}
 			slot->next = newslot;
 		}
 		slot = newslot;
@@ -404,7 +444,7 @@ struct fill_chain {
 	struct fill_chain *next;
 };
 
-static struct fill_chain *fill_cfg = NULL;
+static struct fill_chain *fill_cfg;
 
 void add_fill_function(void *data, int (*fill)(void *))
 {
@@ -535,9 +575,8 @@ static void finish_active_slot(struct active_request_slot *slot)
 	}
 
 	/* Run callback if appropriate */
-	if (slot->callback_func != NULL) {
+	if (slot->callback_func != NULL)
 		slot->callback_func(slot->callback_data);
-	}
 }
 
 void finish_all_active_slots(void)
@@ -567,8 +606,10 @@ static inline int needs_quote(int ch)
 
 static inline int hex(int v)
 {
-	if (v < 10) return '0' + v;
-	else return 'A' + v - 10;
+	if (v < 10)
+		return '0' + v;
+	else
+		return 'A' + v - 10;
 }
 
 static char *quote_ref_url(const char *base, const char *ref)

mailmap.c

@@ -50,6 +50,15 @@ static void add_mapping(struct string_list *map,
 {
 	struct mailmap_entry *me;
 	int index;
+	char *p;
+
+	if (old_email)
+		for (p = old_email; *p; p++)
+			*p = tolower(*p);
+	if (new_email)
+		for (p = new_email; *p; p++)
+			*p = tolower(*p);
+
 	if (old_email == NULL) {
 		old_email = new_email;
 		new_email = NULL;
@@ -90,7 +99,8 @@ static void add_mapping(struct string_list *map,
 		 old_name, old_email, new_name, new_email);
 }
 
-static char *parse_name_and_email(char *buffer, char **name, char **email)
+static char *parse_name_and_email(char *buffer, char **name,
+		char **email, int allow_empty_email)
 {
 	char *left, *right, *nstart, *nend;
 	*name = *email = 0;
@@ -99,7 +109,7 @@ static char *parse_name_and_email(char *buffer, char **name, char **email)
 		return NULL;
 	if ((right = strchr(left+1, '>')) == NULL)
 		return NULL;
-	if (left+1 == right)
+	if (!allow_empty_email && (left+1 == right))
 		return NULL;
 
 	/* remove whitespace from beginning and end of name */
@@ -150,8 +160,8 @@ static int read_single_mailmap(struct string_list *map, const char *filename, ch
 			}
 			continue;
 		}
-		if ((name2 = parse_name_and_email(buffer, &name1, &email1)) != NULL)
-			parse_name_and_email(name2, &name2, &email2);
+		if ((name2 = parse_name_and_email(buffer, &name1, &email1, 0)) != NULL)
+			parse_name_and_email(name2, &name2, &email2, 1);
 
 		if (email1)
 			add_mapping(map, name1, email1, name2, email2);

patch-ids.c

@@ -1,6 +1,7 @@
 #include "cache.h"
 #include "diff.h"
 #include "commit.h"
+#include "sha1-lookup.h"
 #include "patch-ids.h"
 
 static int commit_patch_id(struct commit *commit, struct diff_options *options,
@@ -15,99 +16,15 @@ static int commit_patch_id(struct commit *commit, struct diff_options *options,
 	return diff_flush_patch_id(options, sha1);
 }
 
-static uint32_t take2(const unsigned char *id)
+static const unsigned char *patch_id_access(size_t index, void *table)
 {
-	return ((id[0] << 8) | id[1]);
+	struct patch_id **id_table = table;
+	return id_table[index]->patch_id;
 }
 
-/*
- * Conventional binary search loop looks like this:
- *
- *      do {
- *              int mi = (lo + hi) / 2;
- *              int cmp = "entry pointed at by mi" minus "target";
- *              if (!cmp)
- *                      return (mi is the wanted one)
- *              if (cmp > 0)
- *                      hi = mi; "mi is larger than target"
- *              else
- *                      lo = mi+1; "mi is smaller than target"
- *      } while (lo < hi);
- *
- * The invariants are:
- *
- * - When entering the loop, lo points at a slot that is never
- *   above the target (it could be at the target), hi points at a
- *   slot that is guaranteed to be above the target (it can never
- *   be at the target).
- *
- * - We find a point 'mi' between lo and hi (mi could be the same
- *   as lo, but never can be the same as hi), and check if it hits
- *   the target.  There are three cases:
- *
- *    - if it is a hit, we are happy.
- *
- *    - if it is strictly higher than the target, we update hi with
- *      it.
- *
- *    - if it is strictly lower than the target, we update lo to be
- *      one slot after it, because we allow lo to be at the target.
- *
- * When choosing 'mi', we do not have to take the "middle" but
- * anywhere in between lo and hi, as long as lo <= mi < hi is
- * satisfied.  When we somehow know that the distance between the
- * target and lo is much shorter than the target and hi, we could
- * pick mi that is much closer to lo than the midway.
- */
 static int patch_pos(struct patch_id **table, int nr, const unsigned char *id)
 {
-	int hi = nr;
-	int lo = 0;
-	int mi = 0;
-
-	if (!nr)
-		return -1;
-
-	if (nr != 1) {
-		unsigned lov, hiv, miv, ofs;
-
-		for (ofs = 0; ofs < 18; ofs += 2) {
-			lov = take2(table[0]->patch_id + ofs);
-			hiv = take2(table[nr-1]->patch_id + ofs);
-			miv = take2(id + ofs);
-			if (miv < lov)
-				return -1;
-			if (hiv < miv)
-				return -1 - nr;
-			if (lov != hiv) {
-				/*
-				 * At this point miv could be equal
-				 * to hiv (but id could still be higher);
-				 * the invariant of (mi < hi) should be
-				 * kept.
-				 */
-				mi = (nr-1) * (miv - lov) / (hiv - lov);
-				if (lo <= mi && mi < hi)
-					break;
-				die("oops");
-			}
-		}
-		if (18 <= ofs)
-			die("cannot happen -- lo and hi are identical");
-	}
-
-	do {
-		int cmp;
-		cmp = hashcmp(table[mi]->patch_id, id);
-		if (!cmp)
-			return mi;
-		if (cmp > 0)
-			hi = mi;
-		else
-			lo = mi + 1;
-		mi = (hi + lo) / 2;
-	} while (lo < hi);
-	return -lo-1;
+	return sha1_pos(id, table, nr, patch_id_access);
 }
 
 #define BUCKET_SIZE 190 /* 190 * 21 = 3990, with slop close enough to 4K */

reflog-walk.c

@@ -242,7 +242,7 @@ void fake_reflog_parent(struct reflog_walk_info *info, struct commit *commit)
 }
 
 void show_reflog_message(struct reflog_walk_info* info, int oneline,
-	int relative_date)
+	enum date_mode dmode)
 {
 	if (info && info->last_commit_reflog) {
 		struct commit_reflog *commit_reflog = info->last_commit_reflog;
@@ -251,8 +251,10 @@ void show_reflog_message(struct reflog_walk_info* info, int oneline,
 		info = &commit_reflog->reflogs->items[commit_reflog->recno+1];
 		if (oneline) {
 			printf("%s@{", commit_reflog->reflogs->ref);
-			if (commit_reflog->flag || relative_date)
-				printf("%s", show_date(info->timestamp, 0, 1));
+			if (commit_reflog->flag || dmode)
+				printf("%s", show_date(info->timestamp,
+						       info->tz,
+						       dmode));
 			else
 				printf("%d", commit_reflog->reflogs->nr
 				       - 2 - commit_reflog->recno);
@@ -260,10 +262,10 @@ void show_reflog_message(struct reflog_walk_info* info, int oneline,
 		}
 		else {
 			printf("Reflog: %s@{", commit_reflog->reflogs->ref);
-			if (commit_reflog->flag || relative_date)
+			if (commit_reflog->flag || dmode)
 				printf("%s", show_date(info->timestamp,
 							info->tz,
-							relative_date));
+							dmode));
 			else
 				printf("%d", commit_reflog->reflogs->nr
 				       - 2 - commit_reflog->recno);

reflog-walk.h

@@ -1,11 +1,14 @@
 #ifndef REFLOG_WALK_H
 #define REFLOG_WALK_H
 
+#include "cache.h"
+
 extern void init_reflog_walk(struct reflog_walk_info** info);
 extern int add_reflog_for_walk(struct reflog_walk_info *info,
 		struct commit *commit, const char *name);
 extern void fake_reflog_parent(struct reflog_walk_info *info,
 		struct commit *commit);
-extern void show_reflog_message(struct reflog_walk_info *info, int, int);
+extern void show_reflog_message(struct reflog_walk_info *info, int,
+		enum date_mode);
 
 #endif

refs.c

@@ -742,6 +742,16 @@ int check_ref_format(const char *ref)
 	}
 }
 
+const char *prettify_ref(const struct ref *ref)
+{
+	const char *name = ref->name;
+	return name + (
+		!prefixcmp(name, "refs/heads/") ? 11 :
+		!prefixcmp(name, "refs/tags/") ? 10 :
+		!prefixcmp(name, "refs/remotes/") ? 13 :
+		0);
+}
+
 const char *ref_rev_parse_rules[] = {
 	"%.*s",
 	"refs/%.*s",

refs.h

@@ -80,6 +80,8 @@ extern int for_each_reflog(each_ref_fn, void *);
 #define CHECK_REF_FORMAT_WILDCARD (-3)
 extern int check_ref_format(const char *target);
 
+extern const char *prettify_ref(const struct ref *ref);
+
 /** rename ref, return 0 on success **/
 extern int rename_ref(const char *oldref, const char *newref, const char *logmsg);
 

remote.c

@@ -1401,9 +1401,10 @@ int stat_tracking_info(struct branch *branch, int *num_ours, int *num_theirs)
 	if (theirs == ours)
 		return 0;
 
-	/* Run "rev-list --left-right ours...theirs" internally... */
+	/* Run "rev-list --no-merges --left-right ours...theirs" internally... */
 	rev_argc = 0;
 	rev_argv[rev_argc++] = NULL;
+	rev_argv[rev_argc++] = "--no-merges";
 	rev_argv[rev_argc++] = "--left-right";
 	rev_argv[rev_argc++] = symmetric;
 	rev_argv[rev_argc++] = "--";

revision.c

@@ -1106,10 +1106,6 @@ static int handle_revision_opt(struct rev_info *revs, int argc, const char **arg
 		revs->edge_hint = 1;
 	} else if (!strcmp(arg, "--unpacked")) {
 		revs->unpacked = 1;
-		revs->kept_pack_only = 0;
-	} else if (!strcmp(arg, "--kept-pack-only")) {
-		revs->unpacked = 1;
-		revs->kept_pack_only = 1;
 	} else if (!prefixcmp(arg, "--unpacked=")) {
 		die("--unpacked=<packfile> no longer supported.");
 	} else if (!strcmp(arg, "-r")) {
@@ -1679,10 +1675,7 @@ enum commit_action simplify_commit(struct rev_info *revs, struct commit *commit)
 {
 	if (commit->object.flags & SHOWN)
 		return commit_ignore;
-	if (revs->unpacked &&
-	    (revs->kept_pack_only
-	     ? has_sha1_kept_pack(commit->object.sha1)
-	     : has_sha1_pack(commit->object.sha1)))
+	if (revs->unpacked && has_sha1_pack(commit->object.sha1))
 		return commit_ignore;
 	if (revs->show_all)
 		return commit_show;

revision.h

@@ -50,7 +50,6 @@ struct rev_info {
 			edge_hint:1,
 			limited:1,
 			unpacked:1,
-			kept_pack_only:1,
 			boundary:2,
 			left_right:1,
 			rewrite_parents:1,

run-command.h

@@ -10,7 +10,7 @@ enum {
 	ERR_RUN_COMMAND_WAITPID_SIGNAL,
 	ERR_RUN_COMMAND_WAITPID_NOEXIT,
 };
-#define IS_RUN_COMMAND_ERR(x) ((x) <= -ERR_RUN_COMMAND_FORK)
+#define IS_RUN_COMMAND_ERR(x) (-(x) >= ERR_RUN_COMMAND_FORK)
 
 struct child_process {
 	const char **argv;

send-pack.h

@@ -2,9 +2,7 @@
 #define SEND_PACK_H
 
 struct send_pack_args {
-	const char *receivepack;
 	unsigned verbose:1,
-		send_all:1,
 		send_mirror:1,
 		force_update:1,
 		use_thin_pack:1,
@@ -12,7 +10,7 @@ struct send_pack_args {
 };
 
 int send_pack(struct send_pack_args *args,
-	      const char *dest, struct remote *remote,
-	      int nr_heads, const char **heads);
+	      int fd[], struct child_process *conn,
+	      struct ref *remote_refs, struct extra_have_objects *extra_have);
 
 #endif

sha1-lookup.c

@@ -1,6 +1,107 @@
 #include "cache.h"
 #include "sha1-lookup.h"
 
+static uint32_t take2(const unsigned char *sha1)
+{
+	return ((sha1[0] << 8) | sha1[1]);
+}
+
+/*
+ * Conventional binary search loop looks like this:
+ *
+ *      do {
+ *              int mi = (lo + hi) / 2;
+ *              int cmp = "entry pointed at by mi" minus "target";
+ *              if (!cmp)
+ *                      return (mi is the wanted one)
+ *              if (cmp > 0)
+ *                      hi = mi; "mi is larger than target"
+ *              else
+ *                      lo = mi+1; "mi is smaller than target"
+ *      } while (lo < hi);
+ *
+ * The invariants are:
+ *
+ * - When entering the loop, lo points at a slot that is never
+ *   above the target (it could be at the target), hi points at a
+ *   slot that is guaranteed to be above the target (it can never
+ *   be at the target).
+ *
+ * - We find a point 'mi' between lo and hi (mi could be the same
+ *   as lo, but never can be the same as hi), and check if it hits
+ *   the target.  There are three cases:
+ *
+ *    - if it is a hit, we are happy.
+ *
+ *    - if it is strictly higher than the target, we update hi with
+ *      it.
+ *
+ *    - if it is strictly lower than the target, we update lo to be
+ *      one slot after it, because we allow lo to be at the target.
+ *
+ * When choosing 'mi', we do not have to take the "middle" but
+ * anywhere in between lo and hi, as long as lo <= mi < hi is
+ * satisfied.  When we somehow know that the distance between the
+ * target and lo is much shorter than the target and hi, we could
+ * pick mi that is much closer to lo than the midway.
+ */
+/*
+ * The table should contain "nr" elements.
+ * The sha1 of element i (between 0 and nr - 1) should be returned
+ * by "fn(i, table)".
+ */
+int sha1_pos(const unsigned char *sha1, void *table, size_t nr,
+	     sha1_access_fn fn)
+{
+	size_t hi = nr;
+	size_t lo = 0;
+	size_t mi = 0;
+
+	if (!nr)
+		return -1;
+
+	if (nr != 1) {
+		size_t lov, hiv, miv, ofs;
+
+		for (ofs = 0; ofs < 18; ofs += 2) {
+			lov = take2(fn(0, table) + ofs);
+			hiv = take2(fn(nr - 1, table) + ofs);
+			miv = take2(sha1 + ofs);
+			if (miv < lov)
+				return -1;
+			if (hiv < miv)
+				return -1 - nr;
+			if (lov != hiv) {
+				/*
+				 * At this point miv could be equal
+				 * to hiv (but sha1 could still be higher);
+				 * the invariant of (mi < hi) should be
+				 * kept.
+				 */
+				mi = (nr - 1) * (miv - lov) / (hiv - lov);
+				if (lo <= mi && mi < hi)
+					break;
+				die("oops");
+			}
+		}
+		if (18 <= ofs)
+			die("cannot happen -- lo and hi are identical");
+	}
+
+	do {
+		int cmp;
+		cmp = hashcmp(fn(mi, table), sha1);
+		if (!cmp)
+			return mi;
+		if (cmp > 0)
+			hi = mi;
+		else
+			lo = mi + 1;
+		mi = (hi + lo) / 2;
+	} while (lo < hi);
+	return -lo-1;
+}
+
 /*
  * Conventional binary search loop looks like this:
  *

sha1-lookup.h

@@ -1,6 +1,13 @@
 #ifndef SHA1_LOOKUP_H
 #define SHA1_LOOKUP_H
 
+typedef const unsigned char *sha1_access_fn(size_t index, void *table);
+
+extern int sha1_pos(const unsigned char *sha1,
+		    void *table,
+		    size_t nr,
+		    sha1_access_fn fn);
+
 extern int sha1_entry_pos(const void *table,
 			  size_t elem_size,
 			  size_t key_offset,

sha1_file.c

@@ -1919,8 +1919,7 @@ off_t find_pack_entry_one(const unsigned char *sha1,
 	return 0;
 }
 
-static int find_pack_ent(const unsigned char *sha1, struct pack_entry *e,
-			 int kept_pack_only)
+static int find_pack_entry(const unsigned char *sha1, struct pack_entry *e)
 {
 	static struct packed_git *last_found = (void *)1;
 	struct packed_git *p;
@@ -1932,8 +1931,6 @@ static int find_pack_ent(const unsigned char *sha1, struct pack_entry *e,
 	p = (last_found == (void *)1) ? packed_git : last_found;
 
 	do {
-		if (kept_pack_only && !p->pack_keep)
-			goto next;
 		if (p->num_bad_objects) {
 			unsigned i;
 			for (i = 0; i < p->num_bad_objects; i++)
@@ -1973,16 +1970,6 @@ static int find_pack_ent(const unsigned char *sha1, struct pack_entry *e,
 	return 0;
 }
 
-static int find_pack_entry(const unsigned char *sha1, struct pack_entry *e)
-{
-	return find_pack_ent(sha1, e, 0);
-}
-
-static int find_kept_pack_entry(const unsigned char *sha1, struct pack_entry *e)
-{
-	return find_pack_ent(sha1, e, 1);
-}
-
 struct packed_git *find_sha1_pack(const unsigned char *sha1,
 				  struct packed_git *packs)
 {
@@ -2456,12 +2443,6 @@ int has_sha1_pack(const unsigned char *sha1)
 	return find_pack_entry(sha1, &e);
 }
 
-int has_sha1_kept_pack(const unsigned char *sha1)
-{
-	struct pack_entry e;
-	return find_kept_pack_entry(sha1, &e);
-}
-
 int has_sha1_file(const unsigned char *sha1)
 {
 	struct pack_entry e;

t/Makefile

@@ -24,7 +24,7 @@ pre-clean:
 	$(RM) -r test-results
 
 clean:
-	$(RM) -r 'trash directory' test-results
+	$(RM) -r 'trash directory'.* test-results
 
 aggregate-results-and-cleanup: $(T)
 	$(MAKE) aggregate-results

t/t0020-crlf.sh

@@ -429,6 +429,37 @@ test_expect_success 'in-tree .gitattributes (4)' '
 	}
 '
 
+test_expect_success 'checkout with existing .gitattributes' '
+
+	git config core.autocrlf true &&
+	git config --unset core.safecrlf &&
+	echo ".file2 -crlfQ" | q_to_cr >> .gitattributes &&
+	git add .gitattributes &&
+	git commit -m initial &&
+	echo ".file -crlfQ" | q_to_cr >> .gitattributes &&
+	echo "contents" > .file &&
+	git add .gitattributes .file &&
+	git commit -m second &&
+
+	git checkout master~1 &&
+	git checkout master &&
+	test "$(git diff-files --raw)" = ""
+
+'
+
+test_expect_success 'checkout when deleting .gitattributes' '
+
+	git rm .gitattributes &&
+	echo "contentsQ" | q_to_cr > .file2 &&
+	git add .file2 &&
+	git commit -m third
+
+	git checkout master~1 &&
+	git checkout master &&
+	remove_cr .file2 >/dev/null
+
+'
+
 test_expect_success 'invalid .gitattributes (must not crash)' '
 
 	echo "three +crlf" >>.gitattributes &&

t/t1411-reflog-show.sh

@@ -0,0 +1,67 @@
+#!/bin/sh
+
+test_description='Test reflog display routines'
+. ./test-lib.sh
+
+test_expect_success 'setup' '
+	echo content >file &&
+	git add file &&
+	test_tick &&
+	git commit -m one
+'
+
+cat >expect <<'EOF'
+Reflog: HEAD@{0} (C O Mitter <committer@example.com>)
+Reflog message: commit (initial): one
+EOF
+test_expect_success 'log -g shows reflog headers' '
+	git log -g -1 >tmp &&
+	grep ^Reflog <tmp >actual &&
+	test_cmp expect actual
+'
+
+cat >expect <<'EOF'
+e46513e HEAD@{0}: commit (initial): one
+EOF
+test_expect_success 'oneline reflog format' '
+	git log -g -1 --oneline >actual &&
+	test_cmp expect actual
+'
+
+cat >expect <<'EOF'
+Reflog: HEAD@{Thu Apr 7 15:13:13 2005 -0700} (C O Mitter <committer@example.com>)
+Reflog message: commit (initial): one
+EOF
+test_expect_success 'using @{now} syntax shows reflog date (multiline)' '
+	git log -g -1 HEAD@{now} >tmp &&
+	grep ^Reflog <tmp >actual &&
+	test_cmp expect actual
+'
+
+cat >expect <<'EOF'
+e46513e HEAD@{Thu Apr 7 15:13:13 2005 -0700}: commit (initial): one
+EOF
+test_expect_success 'using @{now} syntax shows reflog date (oneline)' '
+	git log -g -1 --oneline HEAD@{now} >actual &&
+	test_cmp expect actual
+'
+
+cat >expect <<'EOF'
+Reflog: HEAD@{1112911993 -0700} (C O Mitter <committer@example.com>)
+Reflog message: commit (initial): one
+EOF
+test_expect_success 'using --date= shows reflog date (multiline)' '
+	git log -g -1 --date=raw >tmp &&
+	grep ^Reflog <tmp >actual &&
+	test_cmp expect actual
+'
+
+cat >expect <<'EOF'
+e46513e HEAD@{1112911993 -0700}: commit (initial): one
+EOF
+test_expect_success 'using --date= shows reflog date (oneline)' '
+	git log -g -1 --oneline --date=raw >actual &&
+	test_cmp expect actual
+'
+
+test_done

t/t3200-branch.sh

@@ -195,7 +195,7 @@ test_expect_success 'test deleting branch deletes branch config' \
 test_expect_success 'test deleting branch without config' \
     'git branch my7 s &&
      sha1=$(git rev-parse my7 | cut -c 1-7) &&
-     test "$(git branch -d my7 2>&1)" = "Deleted branch my7 ($sha1)."'
+     test "$(git branch -d my7 2>&1)" = "Deleted branch my7 (was $sha1)."'
 
 test_expect_success 'test --track without .fetch entries' \
     'git branch --track my8 &&

t/t4014-format-patch.sh

@@ -128,6 +128,21 @@ test_expect_success 'additional command line cc' '
 	grep "^ *S. E. Cipient <scipient@example.com>$" patch5
 '
 
+test_expect_success 'command line headers' '
+
+	git config --unset-all format.headers &&
+	git format-patch --add-header="Cc: R. E. Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^$/q" >patch6 &&
+	grep "^Cc: R. E. Cipient <rcipient@example.com>$" patch6
+'
+
+test_expect_success 'configuration headers and command line headers' '
+
+	git config --replace-all format.headers "Cc: R. E. Cipient <rcipient@example.com>" &&
+	git format-patch --add-header="Cc: S. E. Cipient <scipient@example.com>" --stdout master..side | sed -e "/^$/q" >patch7 &&
+	grep "^Cc: R. E. Cipient <rcipient@example.com>,$" patch7 &&
+	grep "^ *S. E. Cipient <scipient@example.com>$" patch7
+'
+
 test_expect_success 'multiple files' '
 
 	rm -rf patches/ &&

t/t4020-diff-external.sh

@@ -136,4 +136,28 @@ test_expect_success 'GIT_EXTERNAL_DIFF with more than one changed files' '
 	GIT_EXTERNAL_DIFF=echo git diff
 '
 
+echo "#!$SHELL_PATH" >fake-diff.sh
+cat >> fake-diff.sh <<\EOF
+cat $2 >> crlfed.txt
+EOF
+chmod a+x fake-diff.sh
+
+keep_only_cr () {
+	tr -dc '\015'
+}
+
+test_expect_success 'external diff with autocrlf = true' '
+	git config core.autocrlf true &&
+	GIT_EXTERNAL_DIFF=./fake-diff.sh git diff &&
+	test $(wc -l < crlfed.txt) = $(cat crlfed.txt | keep_only_cr | wc -c)
+'
+
+test_expect_success 'diff --cached' '
+	git add file &&
+	git update-index --assume-unchanged file &&
+	echo second >file &&
+	git diff --cached >actual &&
+	test_cmp ../t4020/diff.NUL actual
+'
+
 test_done

t/t7005-editor.sh

@@ -7,6 +7,7 @@ test_description='GIT_EDITOR, core.editor, and stuff'
 for i in GIT_EDITOR core_editor EDITOR VISUAL vi
 do
 	cat >e-$i.sh <<-EOF
+	#!$SHELL_PATH
 	echo "Edited by $i" >"\$1"
 	EOF
 	chmod +x e-$i.sh

t/t7502-commit.sh

@@ -234,7 +234,7 @@ cat >.git/FAKE_EDITOR <<EOF
 # kill -TERM command added below.
 EOF
 
-test_expect_success 'a SIGTERM should break locks' '
+test_expect_success EXECKEEPSPID 'a SIGTERM should break locks' '
 	echo >>negative &&
 	! "$SHELL_PATH" -c '\''
 	  echo kill -TERM $$ >> .git/FAKE_EDITOR

t/t7700-repack.sh

@@ -88,5 +88,66 @@ test_expect_failure 'packed obs in alt ODB are repacked when local repo has pack
 	done
 '
 
+test_expect_success 'packed obs in alternate ODB kept pack are repacked' '
+	# swap the .keep so the commit object is in the pack with .keep
+	for p in alt_objects/pack/*.pack
+	do
+		base_name=$(basename $p .pack)
+		if test -f alt_objects/pack/$base_name.keep
+		then
+			rm alt_objects/pack/$base_name.keep
+		else
+			touch alt_objects/pack/$base_name.keep
+		fi
+	done
+	git repack -a -d &&
+	myidx=$(ls -1 .git/objects/pack/*.idx) &&
+	test -f "$myidx" &&
+	for p in alt_objects/pack/*.idx; do
+		git verify-pack -v $p | sed -n -e "/^[0-9a-f]\{40\}/p"
+	done | while read sha1 rest; do
+		if ! ( git verify-pack -v $myidx | grep "^$sha1" ); then
+			echo "Missing object in local pack: $sha1"
+			return 1
+		fi
+	done
+'
+
+test_expect_success 'packed unreachable obs in alternate ODB are not loosened' '
+	rm -f alt_objects/pack/*.keep &&
+	mv .git/objects/pack/* alt_objects/pack/ &&
+	csha1=$(git rev-parse HEAD^{commit}) &&
+	git reset --hard HEAD^ &&
+	sleep 1 &&
+	git reflog expire --expire=now --expire-unreachable=now --all &&
+	# The pack-objects call on the next line is equivalent to
+	# git repack -A -d without the call to prune-packed
+	git pack-objects --honor-pack-keep --non-empty --all --reflog \
+	    --unpack-unreachable </dev/null pack &&
+	rm -f .git/objects/pack/* &&
+	mv pack-* .git/objects/pack/ &&
+	test 0 = $(git verify-pack -v -- .git/objects/pack/*.idx |
+		egrep "^$csha1 " | sort | uniq | wc -l) &&
+	echo > .git/objects/info/alternates &&
+	test_must_fail git show $csha1
+'
+
+test_expect_success 'local packed unreachable obs that exist in alternate ODB are not loosened' '
+	echo `pwd`/alt_objects > .git/objects/info/alternates &&
+	echo "$csha1" | git pack-objects --non-empty --all --reflog pack &&
+	rm -f .git/objects/pack/* &&
+	mv pack-* .git/objects/pack/ &&
+	# The pack-objects call on the next line is equivalent to
+	# git repack -A -d without the call to prune-packed
+	git pack-objects --honor-pack-keep --non-empty --all --reflog \
+	    --unpack-unreachable </dev/null pack &&
+	rm -f .git/objects/pack/* &&
+	mv pack-* .git/objects/pack/ &&
+	test 0 = $(git verify-pack -v -- .git/objects/pack/*.idx |
+		egrep "^$csha1 " | sort | uniq | wc -l) &&
+	echo > .git/objects/info/alternates &&
+	test_must_fail git show $csha1
+'
+
 test_done
 

t/t9001-send-email.sh

@@ -421,8 +421,8 @@ test_confirm () {
 		--from="Example <nobody@example.com>" \
 		--to=nobody@example.com \
 		--smtp-server="$(pwd)/fake.sendmail" \
-		$@ \
-		$patches | grep "Send this email"
+		$@ $patches > stdout &&
+	grep "Send this email" stdout
 }
 
 test_expect_success '--confirm=always' '
@@ -444,8 +444,10 @@ test_expect_success '--confirm=compose' '
 test_expect_success 'confirm by default (due to cc)' '
 	CONFIRM=$(git config --get sendemail.confirm) &&
 	git config --unset sendemail.confirm &&
-	test_confirm &&
-	git config sendemail.confirm $CONFIRM
+	test_confirm
+	ret="$?"
+	git config sendemail.confirm ${CONFIRM:-never}
+	test $ret = "0"
 '
 
 test_expect_success 'confirm by default (due to --compose)' '
@@ -457,6 +459,65 @@ test_expect_success 'confirm by default (due to --compose)' '
 	test $ret = "0"
 '
 
+test_expect_success 'confirm detects EOF (inform assumes y)' '
+	CONFIRM=$(git config --get sendemail.confirm) &&
+	git config --unset sendemail.confirm &&
+	rm -fr outdir &&
+	git format-patch -2 -o outdir &&
+	GIT_SEND_EMAIL_NOTTY=1 \
+		git send-email \
+			--from="Example <nobody@example.com>" \
+			--to=nobody@example.com \
+			--smtp-server="$(pwd)/fake.sendmail" \
+			outdir/*.patch < /dev/null
+	ret="$?"
+	git config sendemail.confirm ${CONFIRM:-never}
+	test $ret = "0"
+'
+
+test_expect_success 'confirm detects EOF (auto causes failure)' '
+	CONFIRM=$(git config --get sendemail.confirm) &&
+	git config sendemail.confirm auto &&
+	GIT_SEND_EMAIL_NOTTY=1 &&
+	export GIT_SEND_EMAIL_NOTTY &&
+		test_must_fail git send-email \
+			--from="Example <nobody@example.com>" \
+			--to=nobody@example.com \
+			--smtp-server="$(pwd)/fake.sendmail" \
+			$patches < /dev/null
+	ret="$?"
+	git config sendemail.confirm ${CONFIRM:-never}
+	test $ret = "0"
+'
+
+test_expect_success 'confirm doesnt loop forever' '
+	CONFIRM=$(git config --get sendemail.confirm) &&
+	git config sendemail.confirm auto &&
+	GIT_SEND_EMAIL_NOTTY=1 &&
+	export GIT_SEND_EMAIL_NOTTY &&
+		yes "bogus" | test_must_fail git send-email \
+			--from="Example <nobody@example.com>" \
+			--to=nobody@example.com \
+			--smtp-server="$(pwd)/fake.sendmail" \
+			$patches
+	ret="$?"
+	git config sendemail.confirm ${CONFIRM:-never}
+	test $ret = "0"
+'
+
+test_expect_success 'utf8 Cc is rfc2047 encoded' '
+	clean_fake_sendmail &&
+	rm -fr outdir &&
+	git format-patch -1 -o outdir --cc="àéìöú <utf8@example.com>" &&
+	git send-email \
+	--from="Example <nobody@example.com>" \
+	--to=nobody@example.com \
+	--smtp-server="$(pwd)/fake.sendmail" \
+	outdir/*.patch &&
+	grep "^Cc:" msgtxt1 |
+	grep "=?utf-8?q?=C3=A0=C3=A9=C3=AC=C3=B6=C3=BA?= <utf8@example.com>"
+'
+
 test_expect_success '--compose adds MIME for utf8 body' '
 	clean_fake_sendmail &&
 	(echo "#!$SHELL_PATH" &&

t/t9301-fast-export.sh

@@ -8,6 +8,9 @@ test_description='git fast-export'
 
 test_expect_success 'setup' '
 
+	echo break it > file0 &&
+	git add file0 &&
+	test_tick &&
 	echo Wohlauf > file &&
 	git add file &&
 	test_tick &&
@@ -57,8 +60,8 @@ test_expect_success 'fast-export master~2..master' '
 		(cd new &&
 		 git fast-import &&
 		 test $MASTER != $(git rev-parse --verify refs/heads/partial) &&
-		 git diff master..partial &&
-		 git diff master^..partial^ &&
+		 git diff --exit-code master partial &&
+		 git diff --exit-code master^ partial^ &&
 		 test_must_fail git rev-parse partial~2)
 
 '
@@ -259,4 +262,19 @@ test_expect_success 'cope with tagger-less tags' '
 
 '
 
+test_expect_success 'set-up a few more tags for tag export tests' '
+	git checkout -f master &&
+	HEAD_TREE=`git show -s --pretty=raw HEAD | grep tree | sed "s/tree //"` &&
+	git tag    tree_tag        -m "tagging a tree" $HEAD_TREE &&
+	git tag -a tree_tag-obj    -m "tagging a tree" $HEAD_TREE &&
+	git tag    tag-obj_tag     -m "tagging a tag" tree_tag-obj &&
+	git tag -a tag-obj_tag-obj -m "tagging a tag" tree_tag-obj
+'
+
+# NEEDSWORK: not just check return status, but validate the output
+test_expect_success 'tree_tag'        'git fast-export tree_tag'
+test_expect_success 'tree_tag-obj'    'git fast-export tree_tag-obj'
+test_expect_success 'tag-obj_tag'     'git fast-export tag-obj_tag'
+test_expect_success 'tag-obj_tag-obj' 'git fast-export tag-obj_tag-obj'
+
 test_done

t/test-lib.sh

@@ -523,14 +523,6 @@ test_done () {
 	fi
 	case "$test_failure" in
 	0)
-		# We could:
-		# cd .. && rm -fr 'trash directory'
-		# but that means we forbid any tests that use their own
-		# subdirectory from calling test_done without coming back
-		# to where they started from.
-		# The Makefile provided will clean this test area so
-		# we will leave things as they are.
-
 		say_color pass "passed all $msg"
 
 		test -d "$remove_trash" &&
@@ -697,10 +689,12 @@ case $(uname -s) in
 	}
 	# no POSIX permissions
 	# backslashes in pathspec are converted to '/'
+	# exec does not inherit the PID
 	;;
 *)
 	test_set_prereq POSIXPERM
 	test_set_prereq BSLASHPSPEC
+	test_set_prereq EXECKEEPSPID
 	;;
 esac
 

transport.c

@@ -143,7 +143,7 @@ static const char *rsync_url(const char *url)
 	return prefixcmp(url, "rsync://") ? skip_prefix(url, "rsync:") : url;
 }
 
-static struct ref *get_refs_via_rsync(struct transport *transport)
+static struct ref *get_refs_via_rsync(struct transport *transport, int for_push)
 {
 	struct strbuf buf = STRBUF_INIT, temp_dir = STRBUF_INIT;
 	struct ref dummy, *tail = &dummy;
@@ -151,6 +151,9 @@ static struct ref *get_refs_via_rsync(struct transport *transport)
 	const char *args[5];
 	int temp_dir_len;
 
+	if (for_push)
+		return NULL;
+
 	/* copy the refs to the temporary directory */
 
 	strbuf_addstr(&temp_dir, git_path("rsync-refs-XXXXXX"));
@@ -429,7 +432,7 @@ static int curl_transport_push(struct transport *transport, int refspec_nr, cons
 	return !!err;
 }
 
-static struct ref *get_refs_via_curl(struct transport *transport)
+static struct ref *get_refs_via_curl(struct transport *transport, int for_push)
 {
 	struct strbuf buffer = STRBUF_INIT;
 	char *data, *start, *mid;
@@ -446,6 +449,9 @@ static struct ref *get_refs_via_curl(struct transport *transport)
 
 	struct walker *walker;
 
+	if (for_push)
+		return NULL;
+
 	if (!transport->data)
 		transport->data = get_http_walker(transport->url,
 						transport->remote);
@@ -532,12 +538,15 @@ struct bundle_transport_data {
 	struct bundle_header header;
 };
 
-static struct ref *get_refs_from_bundle(struct transport *transport)
+static struct ref *get_refs_from_bundle(struct transport *transport, int for_push)
 {
 	struct bundle_transport_data *data = transport->data;
 	struct ref *result = NULL;
 	int i;
 
+	if (for_push)
+		return NULL;
+
 	if (data->fd > 0)
 		close(data->fd);
 	data->fd = read_bundle_header(transport->url, &data->header);
@@ -578,6 +587,7 @@ struct git_transport_data {
 	int fd[2];
 	const char *uploadpack;
 	const char *receivepack;
+	struct extra_have_objects extra_have;
 };
 
 static int set_git_option(struct transport *connection,
@@ -609,20 +619,23 @@ static int set_git_option(struct transport *connection,
 	return 1;
 }
 
-static int connect_setup(struct transport *transport)
+static int connect_setup(struct transport *transport, int for_push, int verbose)
 {
 	struct git_transport_data *data = transport->data;
-	data->conn = git_connect(data->fd, transport->url, data->uploadpack, 0);
+	data->conn = git_connect(data->fd, transport->url,
+				 for_push ? data->receivepack : data->uploadpack,
+				 verbose ? CONNECT_VERBOSE : 0);
 	return 0;
 }
 
-static struct ref *get_refs_via_connect(struct transport *transport)
+static struct ref *get_refs_via_connect(struct transport *transport, int for_push)
 {
 	struct git_transport_data *data = transport->data;
 	struct ref *refs;
 
-	connect_setup(transport);
-	get_remote_heads(data->fd[0], &refs, 0, NULL, 0, NULL);
+	connect_setup(transport, for_push, 0);
+	get_remote_heads(data->fd[0], &refs, 0, NULL,
+			 for_push ? REF_NORMAL : 0, &data->extra_have);
 
 	return refs;
 }
@@ -654,7 +667,7 @@ static int fetch_refs_via_pack(struct transport *transport,
 		origh[i] = heads[i] = xstrdup(to_fetch[i]->name);
 
 	if (!data->conn) {
-		connect_setup(transport);
+		connect_setup(transport, 0, 0);
 		get_remote_heads(data->fd[0], &refs_tmp, 0, NULL, 0, NULL);
 	}
 
@@ -677,20 +690,216 @@ static int fetch_refs_via_pack(struct transport *transport,
 	return (refs ? 0 : -1);
 }
 
-static int git_transport_push(struct transport *transport, int refspec_nr, const char **refspec, int flags)
+static int refs_pushed(struct ref *ref)
+{
+	for (; ref; ref = ref->next) {
+		switch(ref->status) {
+		case REF_STATUS_NONE:
+		case REF_STATUS_UPTODATE:
+			break;
+		default:
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static void update_tracking_ref(struct remote *remote, struct ref *ref, int verbose)
+{
+	struct refspec rs;
+
+	if (ref->status != REF_STATUS_OK && ref->status != REF_STATUS_UPTODATE)
+		return;
+
+	rs.src = ref->name;
+	rs.dst = NULL;
+
+	if (!remote_find_tracking(remote, &rs)) {
+		if (verbose)
+			fprintf(stderr, "updating local tracking ref '%s'\n", rs.dst);
+		if (ref->deletion) {
+			delete_ref(rs.dst, NULL, 0);
+		} else
+			update_ref("update by push", rs.dst,
+					ref->new_sha1, NULL, 0, 0);
+		free(rs.dst);
+	}
+}
+
+#define SUMMARY_WIDTH (2 * DEFAULT_ABBREV + 3)
+
+static void print_ref_status(char flag, const char *summary, struct ref *to, struct ref *from, const char *msg)
+{
+	fprintf(stderr, " %c %-*s ", flag, SUMMARY_WIDTH, summary);
+	if (from)
+		fprintf(stderr, "%s -> %s", prettify_ref(from), prettify_ref(to));
+	else
+		fputs(prettify_ref(to), stderr);
+	if (msg) {
+		fputs(" (", stderr);
+		fputs(msg, stderr);
+		fputc(')', stderr);
+	}
+	fputc('\n', stderr);
+}
+
+static const char *status_abbrev(unsigned char sha1[20])
+{
+	return find_unique_abbrev(sha1, DEFAULT_ABBREV);
+}
+
+static void print_ok_ref_status(struct ref *ref)
+{
+	if (ref->deletion)
+		print_ref_status('-', "[deleted]", ref, NULL, NULL);
+	else if (is_null_sha1(ref->old_sha1))
+		print_ref_status('*',
+			(!prefixcmp(ref->name, "refs/tags/") ? "[new tag]" :
+			  "[new branch]"),
+			ref, ref->peer_ref, NULL);
+	else {
+		char quickref[84];
+		char type;
+		const char *msg;
+
+		strcpy(quickref, status_abbrev(ref->old_sha1));
+		if (ref->nonfastforward) {
+			strcat(quickref, "...");
+			type = '+';
+			msg = "forced update";
+		} else {
+			strcat(quickref, "..");
+			type = ' ';
+			msg = NULL;
+		}
+		strcat(quickref, status_abbrev(ref->new_sha1));
+
+		print_ref_status(type, quickref, ref, ref->peer_ref, msg);
+	}
+}
+
+static int print_one_push_status(struct ref *ref, const char *dest, int count)
+{
+	if (!count)
+		fprintf(stderr, "To %s\n", dest);
+
+	switch(ref->status) {
+	case REF_STATUS_NONE:
+		print_ref_status('X', "[no match]", ref, NULL, NULL);
+		break;
+	case REF_STATUS_REJECT_NODELETE:
+		print_ref_status('!', "[rejected]", ref, NULL,
+				"remote does not support deleting refs");
+		break;
+	case REF_STATUS_UPTODATE:
+		print_ref_status('=', "[up to date]", ref,
+				ref->peer_ref, NULL);
+		break;
+	case REF_STATUS_REJECT_NONFASTFORWARD:
+		print_ref_status('!', "[rejected]", ref, ref->peer_ref,
+				"non-fast forward");
+		break;
+	case REF_STATUS_REMOTE_REJECT:
+		print_ref_status('!', "[remote rejected]", ref,
+				ref->deletion ? NULL : ref->peer_ref,
+				ref->remote_status);
+		break;
+	case REF_STATUS_EXPECTING_REPORT:
+		print_ref_status('!', "[remote failure]", ref,
+				ref->deletion ? NULL : ref->peer_ref,
+				"remote failed to report status");
+		break;
+	case REF_STATUS_OK:
+		print_ok_ref_status(ref);
+		break;
+	}
+
+	return 1;
+}
+
+static void print_push_status(const char *dest, struct ref *refs, int verbose)
+{
+	struct ref *ref;
+	int n = 0;
+
+	if (verbose) {
+		for (ref = refs; ref; ref = ref->next)
+			if (ref->status == REF_STATUS_UPTODATE)
+				n += print_one_push_status(ref, dest, n);
+	}
+
+	for (ref = refs; ref; ref = ref->next)
+		if (ref->status == REF_STATUS_OK)
+			n += print_one_push_status(ref, dest, n);
+
+	for (ref = refs; ref; ref = ref->next) {
+		if (ref->status != REF_STATUS_NONE &&
+		    ref->status != REF_STATUS_UPTODATE &&
+		    ref->status != REF_STATUS_OK)
+			n += print_one_push_status(ref, dest, n);
+	}
+}
+
+static void verify_remote_names(int nr_heads, const char **heads)
+{
+	int i;
+
+	for (i = 0; i < nr_heads; i++) {
+		const char *local = heads[i];
+		const char *remote = strrchr(heads[i], ':');
+
+		if (*local == '+')
+			local++;
+
+		/* A matching refspec is okay.  */
+		if (remote == local && remote[1] == '\0')
+			continue;
+
+		remote = remote ? (remote + 1) : local;
+		switch (check_ref_format(remote)) {
+		case 0: /* ok */
+		case CHECK_REF_FORMAT_ONELEVEL:
+			/* ok but a single level -- that is fine for
+			 * a match pattern.
+			 */
+		case CHECK_REF_FORMAT_WILDCARD:
+			/* ok but ends with a pattern-match character */
+			continue;
+		}
+		die("remote part of refspec is not a valid name in %s",
+		    heads[i]);
+	}
+}
+
+static int git_transport_push(struct transport *transport, struct ref *remote_refs, int flags)
 {
 	struct git_transport_data *data = transport->data;
 	struct send_pack_args args;
+	int ret;
+
+	if (!data->conn) {
+		struct ref *tmp_refs;
+		connect_setup(transport, 1, 0);
+
+		get_remote_heads(data->fd[0], &tmp_refs, 0, NULL, REF_NORMAL,
+				 NULL);
+	}
 
-	args.receivepack = data->receivepack;
-	args.send_all = !!(flags & TRANSPORT_PUSH_ALL);
 	args.send_mirror = !!(flags & TRANSPORT_PUSH_MIRROR);
 	args.force_update = !!(flags & TRANSPORT_PUSH_FORCE);
 	args.use_thin_pack = data->thin;
 	args.verbose = !!(flags & TRANSPORT_PUSH_VERBOSE);
 	args.dry_run = !!(flags & TRANSPORT_PUSH_DRY_RUN);
 
-	return send_pack(&args, transport->url, transport->remote, refspec_nr, refspec);
+	ret = send_pack(&args, data->fd, data->conn, remote_refs,
+			&data->extra_have);
+
+	close(data->fd[1]);
+	close(data->fd[0]);
+	ret |= finish_connect(data->conn);
+	data->conn = NULL;
+
+	return ret;
 }
 
 static int disconnect_git(struct transport *transport)
@@ -760,7 +969,7 @@ struct transport *transport_get(struct remote *remote, const char *url)
 		ret->set_option = set_git_option;
 		ret->get_refs_list = get_refs_via_connect;
 		ret->fetch = fetch_refs_via_pack;
-		ret->push = git_transport_push;
+		ret->push_refs = git_transport_push;
 		ret->disconnect = disconnect_git;
 
 		data->thin = 1;
@@ -787,15 +996,53 @@ int transport_set_option(struct transport *transport,
 int transport_push(struct transport *transport,
 		   int refspec_nr, const char **refspec, int flags)
 {
-	if (!transport->push)
-		return 1;
-	return transport->push(transport, refspec_nr, refspec, flags);
+	verify_remote_names(refspec_nr, refspec);
+
+	if (transport->push)
+		return transport->push(transport, refspec_nr, refspec, flags);
+	if (transport->push_refs) {
+		struct ref *remote_refs =
+			transport->get_refs_list(transport, 1);
+		struct ref **remote_tail;
+		struct ref *local_refs = get_local_heads();
+		int match_flags = MATCH_REFS_NONE;
+		int verbose = flags & TRANSPORT_PUSH_VERBOSE;
+		int ret;
+
+		if (flags & TRANSPORT_PUSH_ALL)
+			match_flags |= MATCH_REFS_ALL;
+		if (flags & TRANSPORT_PUSH_MIRROR)
+			match_flags |= MATCH_REFS_MIRROR;
+
+		remote_tail = &remote_refs;
+		while (*remote_tail)
+			remote_tail = &((*remote_tail)->next);
+		if (match_refs(local_refs, remote_refs, &remote_tail,
+			       refspec_nr, refspec, match_flags)) {
+			return -1;
+		}
+
+		ret = transport->push_refs(transport, remote_refs, flags);
+
+		print_push_status(transport->url, remote_refs, verbose);
+
+		if (!(flags & TRANSPORT_PUSH_DRY_RUN)) {
+			struct ref *ref;
+			for (ref = remote_refs; ref; ref = ref->next)
+				update_tracking_ref(transport->remote, ref, verbose);
+		}
+
+		if (!ret && !refs_pushed(remote_refs))
+			fprintf(stderr, "Everything up-to-date\n");
+		return ret;
+	}
+	return 1;
 }
 
 const struct ref *transport_get_remote_refs(struct transport *transport)
 {
 	if (!transport->remote_refs)
-		transport->remote_refs = transport->get_refs_list(transport);
+		transport->remote_refs = transport->get_refs_list(transport, 0);
 	return transport->remote_refs;
 }
 

transport.h

@@ -18,8 +18,9 @@ struct transport {
 	int (*set_option)(struct transport *connection, const char *name,
 			  const char *value);
 
-	struct ref *(*get_refs_list)(struct transport *transport);
+	struct ref *(*get_refs_list)(struct transport *transport, int for_push);
 	int (*fetch)(struct transport *transport, int refs_nr, const struct ref **refs);
+	int (*push_refs)(struct transport *transport, struct ref *refs, int flags);
 	int (*push)(struct transport *connection, int refspec_nr, const char **refspec, int flags);
 
 	int (*disconnect)(struct transport *connection);

unpack-trees.c

@@ -7,6 +7,7 @@
 #include "unpack-trees.h"
 #include "progress.h"
 #include "refs.h"
+#include "attr.h"
 
 /*
  * Error messages expected by scripts out of plumbing commands such as
@@ -86,6 +87,7 @@ static int check_updates(struct unpack_trees_options *o)
 		cnt = 0;
 	}
 
+	git_attr_set_direction(GIT_ATTR_CHECKOUT, &o->result);
 	for (i = 0; i < index->cache_nr; i++) {
 		struct cache_entry *ce = index->cache[i];
 
@@ -110,6 +112,7 @@ static int check_updates(struct unpack_trees_options *o)
 		}
 	}
 	stop_progress(&progress);
+	git_attr_set_direction(GIT_ATTR_CHECKIN, NULL);
 	return errs != 0;
 }