1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-05-23 13:46:09 +02:00
git/commit-graph.c

2118 lines
54 KiB
C
Raw Normal View History

#include "cache.h"
#include "config.h"
#include "dir.h"
#include "git-compat-util.h"
#include "lockfile.h"
#include "pack.h"
#include "packfile.h"
#include "commit.h"
#include "object.h"
#include "refs.h"
#include "revision.h"
#include "sha1-lookup.h"
#include "commit-graph.h"
#include "object-store.h"
#include "alloc.h"
#include "hashmap.h"
#include "replace-object.h"
commit-graph write: add progress output Before this change the "commit-graph write" command didn't report any progress. On my machine this command takes more than 10 seconds to write the graph for linux.git, and around 1m30s on the 2015-04-03-1M-git.git[1] test repository (a test case for a large monorepository). Furthermore, since the gc.writeCommitGraph setting was added in d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27), there was no indication at all from a "git gc" run that anything was different. This why one of the progress bars being added here uses start_progress() instead of start_delayed_progress(), so that it's guaranteed to be seen. E.g. on my tiny 867 commit dotfiles.git repository: $ git -c gc.writeCommitGraph=true gc Enumerating objects: 2821, done. [...] Computing commit graph generation numbers: 100% (867/867), done. On larger repositories, such as linux.git the delayed progress bar(s) will kick in, and we'll show what's going on instead of, as was previously happening, printing nothing while we write the graph: $ git -c gc.writeCommitGraph=true gc [...] Annotating commits in commit graph: 1565573, done. Computing commit graph generation numbers: 100% (782484/782484), done. Note that here we don't show "Finding commits for commit graph", this is because under "git gc" we seed the search with the commit references in the repository, and that set is too small to show any progress, but would e.g. on a smaller repo such as git.git with --stdin-commits: $ git rev-list --all | git -c gc.writeCommitGraph=true write --stdin-commits Finding commits for commit graph: 100% (162576/162576), done. Computing commit graph generation numbers: 100% (162576/162576), done. With --stdin-packs we don't show any estimation of how much is left to do. This is because we might be processing more than one pack. We could be less lazy here and show progress, either by detecting that we're only processing one pack, or by first looping over the packs to discover how many commits they have. I don't see the point in doing that work. So instead we get (on 2015-04-03-1M-git.git): $ echo pack-<HASH>.idx | git -c gc.writeCommitGraph=true --exec-path=$PWD commit-graph write --stdin-packs Finding commits for commit graph: 13064614, done. Annotating commits in commit graph: 3001341, done. Computing commit graph generation numbers: 100% (1000447/1000447), done. No GC mode uses --stdin-packs. It's what they use at Microsoft to manually compute the generation numbers for their collection of large packs which are never coalesced. The reason we need a "report_progress" variable passed down from "git gc" is so that we don't report this output when we're running in the process "git gc --auto" detaches from the terminal. Since we write the commit graph from the "git gc" process itself (as opposed to what we do with say the "git repack" phase), we'd end up writing the output to .git/gc.log and reporting it to the user next time as part of the "The last gc run reported the following[...]" error, see 329e6e8794 ("gc: save log from daemonized gc --auto and print it next time", 2015-09-19). So we must keep track of whether or not we're running in that demonized mode, and if so print no progress. See [2] and subsequent replies for a discussion of an approach not taken in compute_generation_numbers(). I.e. we're saying "Computing commit graph generation numbers", even though on an established history we're mostly skipping over all the work we did in the past. This is similar to the white lie we tell in the "Writing objects" phase (not all are objects being written). Always showing progress is considered more important than accuracy. I.e. on a repository like 2015-04-03-1M-git.git we'd hang for 6 seconds with no output on the second "git gc" if no changes were made to any objects in the interim if we'd take the approach in [2]. 1. https://github.com/avar/2015-04-03-1M-git 2. <c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com> (https://public-inbox.org/git/c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com/) Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17 17:33:35 +02:00
#include "progress.h"
#define GRAPH_SIGNATURE 0x43475048 /* "CGPH" */
#define GRAPH_CHUNKID_OIDFANOUT 0x4f494446 /* "OIDF" */
#define GRAPH_CHUNKID_OIDLOOKUP 0x4f49444c /* "OIDL" */
#define GRAPH_CHUNKID_DATA 0x43444154 /* "CDAT" */
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
#define GRAPH_CHUNKID_EXTRAEDGES 0x45444745 /* "EDGE" */
#define GRAPH_CHUNKID_BASE 0x42415345 /* "BASE" */
#define GRAPH_DATA_WIDTH (the_hash_algo->rawsz + 16)
#define GRAPH_VERSION_1 0x1
#define GRAPH_VERSION GRAPH_VERSION_1
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
#define GRAPH_EXTRA_EDGES_NEEDED 0x80000000
#define GRAPH_EDGE_LAST_MASK 0x7fffffff
#define GRAPH_PARENT_NONE 0x70000000
#define GRAPH_LAST_EDGE 0x80000000
#define GRAPH_HEADER_SIZE 8
#define GRAPH_FANOUT_SIZE (4 * 256)
#define GRAPH_CHUNKLOOKUP_WIDTH 12
#define GRAPH_MIN_SIZE (GRAPH_HEADER_SIZE + 4 * GRAPH_CHUNKLOOKUP_WIDTH \
+ GRAPH_FANOUT_SIZE + the_hash_algo->rawsz)
commit-graph: fix writing first commit-graph during fetch The previous commit includes a failing test for an issue around fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we fix that bug and set the test to "test_expect_success". The problem arises with this set of commands when the remote repo at <url> has a submodule. Note that --recurse-submodules is not needed to demonstrate the bug. $ git clone <url> test $ cd test $ git -c fetch.writeCommitGraph=true fetch origin Computing commit graph generation numbers: 100% (12/12), done. BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2> Aborted (core dumped) As an initial fix, I converted the code in builtin/fetch.c that calls write_commit_graph_reachable() to instead launch a "git commit-graph write --reachable --split" process. That code worked, but is not how we want the feature to work long-term. That test did demonstrate that the issue must be something to do with internal state of the 'git fetch' process. The write_commit_graph() method in commit-graph.c ensures the commits we plan to write are "closed under reachability" using close_reachable(). This method walks from the input commits, and uses the UNINTERESTING flag to mark which commits have already been visited. This allows the walk to take O(N) time, where N is the number of commits, instead of O(P) time, where P is the number of paths. (The number of paths can be exponential in the number of commits.) However, the UNINTERESTING flag is used in lots of places in the codebase. This flag usually means some barrier to stop a commit walk, such as in revision-walking to compare histories. It is not often cleared after the walk completes because the starting points of those walks do not have the UNINTERESTING flag, and clear_commit_marks() would stop immediately. This is happening during a 'git fetch' call with a remote. The fetch negotiation is comparing the remote refs with the local refs and marking some commits as UNINTERESTING. I tested running clear_commit_marks_many() to clear the UNINTERESTING flag inside close_reachable(), but the tips did not have the flag, so that did nothing. It turns out that the calculate_changed_submodule_paths() method is at fault. Thanks, Peff, for pointing out this detail! More specifically, for each submodule, the collect_changed_submodules() runs a revision walk to essentially do file-history on the list of submodules. That revision walk marks commits UNININTERESTING if they are simplified away by not changing the submodule. Instead, I finally arrived on the conclusion that I should use a flag that is not used in any other part of the code. In commit-reach.c, a number of flags were defined for commit walk algorithms. The REACHABLE flag seemed like it made the most sense, and it seems it was not actually used in the file. The REACHABLE flag was used in early versions of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make can_all_from_reach... linear, 2018-07-20). Add the REACHABLE flag to commit-graph.c and use it instead of UNINTERESTING in close_reachable(). This fixes the bug in manual testing. Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Helped-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 15:40:42 +02:00
/* Remember to update object flag allocation in object.h */
#define REACHABLE (1u<<15)
char *get_commit_graph_filename(const char *obj_dir)
{
char *filename = xstrfmt("%s/info/commit-graph", obj_dir);
char *normalized = xmalloc(strlen(filename) + 1);
normalize_path_copy(normalized, filename);
free(filename);
return normalized;
}
static char *get_split_graph_filename(const char *obj_dir,
const char *oid_hex)
{
char *filename = xstrfmt("%s/info/commit-graphs/graph-%s.graph",
obj_dir,
oid_hex);
char *normalized = xmalloc(strlen(filename) + 1);
normalize_path_copy(normalized, filename);
free(filename);
return normalized;
}
static char *get_chain_filename(const char *obj_dir)
{
return xstrfmt("%s/info/commit-graphs/commit-graph-chain", obj_dir);
}
static uint8_t oid_version(void)
{
return 1;
}
static struct commit_graph *alloc_commit_graph(void)
{
struct commit_graph *g = xcalloc(1, sizeof(*g));
g->graph_fd = -1;
return g;
}
extern int read_replace_refs;
static int commit_graph_compatible(struct repository *r)
{
if (!r->gitdir)
return 0;
if (read_replace_refs) {
prepare_replace_object(r);
if (hashmap_get_size(&r->objects->replace_map->map))
return 0;
}
prepare_commit_graft(r);
if (r->parsed_objects && r->parsed_objects->grafts_nr)
return 0;
if (is_repository_shallow(r))
return 0;
return 1;
}
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:30 +01:00
int open_commit_graph(const char *graph_file, int *fd, struct stat *st)
{
*fd = git_open(graph_file);
if (*fd < 0)
return 0;
if (fstat(*fd, st)) {
close(*fd);
return 0;
}
return 1;
}
struct commit_graph *load_commit_graph_one_fd_st(int fd, struct stat *st)
{
void *graph_map;
size_t graph_size;
struct commit_graph *ret;
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:30 +01:00
graph_size = xsize_t(st->st_size);
if (graph_size < GRAPH_MIN_SIZE) {
close(fd);
error(_("commit-graph file is too small"));
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:30 +01:00
return NULL;
}
graph_map = xmmap(NULL, graph_size, PROT_READ, MAP_PRIVATE, fd, 0);
ret = parse_commit_graph(graph_map, fd, graph_size);
if (!ret) {
munmap(graph_map, graph_size);
close(fd);
}
return ret;
}
commit-graph: fix segfault on e.g. "git status" When core.commitGraph=true is set, various common commands now consult the commit graph. Because the commit-graph code is very trusting of its input data, it's possibly to construct a graph that'll cause an immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In some other cases where git immediately exits with a cryptic error about the graph being broken. The root cause of this is that while the "commit-graph verify" sub-command exhaustively verifies the graph, other users of the graph simply trust the graph, and will e.g. deference data found at certain offsets as pointers, causing segfaults. This change does the bare minimum to ensure that we don't segfault in the common fill_commit_in_graph() codepath called by e.g. setup_revisions(), to do this instrument the "commit-graph verify" tests to always check if "status" would subsequently segfault. This fixes the following tests which would previously segfault: not ok 50 - detect low chunk count not ok 51 - detect missing OID fanout chunk not ok 52 - detect missing OID lookup chunk not ok 53 - detect missing commit data chunk Those happened because with the commit-graph enabled setup_revisions() would eventually call fill_commit_in_graph(), where e.g. g->chunk_commit_data is used early as an offset (and will be 0x0). With this change we get far enough to detect that the graph is broken, and show an error instead. E.g.: $ git status; echo $? error: commit-graph is missing the Commit Data chunk 1 That also sucks, we should *warn* and not hard-fail "status" just because the commit-graph is corrupt, but fixing is left to a follow-up change. A side-effect of changing the reporting from graph_report() to error() is that we now have an "error: " prefix for these even for "commit-graph verify". Pseudo-diff before/after: $ git commit-graph verify -commit-graph is missing the Commit Data chunk +error: commit-graph is missing the Commit Data chunk Changing that is OK. Various errors it emits now early on are prefixed with "error: ", moving these over and changing the output doesn't break anything. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:29 +01:00
static int verify_commit_graph_lite(struct commit_graph *g)
{
/*
* Basic validation shared between parse_commit_graph()
* which'll be called every time the graph is used, and the
* much more expensive verify_commit_graph() used by
* "commit-graph verify".
*
* There should only be very basic checks here to ensure that
* we don't e.g. segfault in fill_commit_in_graph(), but
* because this is a very hot codepath nothing that e.g. loops
* over g->num_commits, or runs a checksum on the commit-graph
* itself.
*/
if (!g->chunk_oid_fanout) {
error("commit-graph is missing the OID Fanout chunk");
return 1;
}
if (!g->chunk_oid_lookup) {
error("commit-graph is missing the OID Lookup chunk");
return 1;
}
if (!g->chunk_commit_data) {
error("commit-graph is missing the Commit Data chunk");
return 1;
}
return 0;
}
struct commit_graph *parse_commit_graph(void *graph_map, int fd,
size_t graph_size)
{
const unsigned char *data, *chunk_lookup;
uint32_t i;
struct commit_graph *graph;
uint64_t last_chunk_offset;
uint32_t last_chunk_id;
uint32_t graph_signature;
unsigned char graph_version, hash_version;
if (!graph_map)
return NULL;
if (graph_size < GRAPH_MIN_SIZE)
return NULL;
data = (const unsigned char *)graph_map;
graph_signature = get_be32(data);
if (graph_signature != GRAPH_SIGNATURE) {
error(_("commit-graph signature %X does not match signature %X"),
graph_signature, GRAPH_SIGNATURE);
return NULL;
}
graph_version = *(unsigned char*)(data + 4);
if (graph_version != GRAPH_VERSION) {
error(_("commit-graph version %X does not match version %X"),
graph_version, GRAPH_VERSION);
return NULL;
}
hash_version = *(unsigned char*)(data + 5);
if (hash_version != oid_version()) {
error(_("commit-graph hash version %X does not match version %X"),
hash_version, oid_version());
return NULL;
}
graph = alloc_commit_graph();
graph->hash_len = the_hash_algo->rawsz;
graph->num_chunks = *(unsigned char*)(data + 6);
graph->graph_fd = fd;
graph->data = graph_map;
graph->data_len = graph_size;
last_chunk_id = 0;
last_chunk_offset = 8;
chunk_lookup = data + 8;
for (i = 0; i < graph->num_chunks; i++) {
uint32_t chunk_id;
uint64_t chunk_offset;
int chunk_repeated = 0;
if (data + graph_size - chunk_lookup <
GRAPH_CHUNKLOOKUP_WIDTH) {
error(_("commit-graph chunk lookup table entry missing; file may be incomplete"));
free(graph);
return NULL;
}
chunk_id = get_be32(chunk_lookup + 0);
chunk_offset = get_be64(chunk_lookup + 4);
chunk_lookup += GRAPH_CHUNKLOOKUP_WIDTH;
if (chunk_offset > graph_size - the_hash_algo->rawsz) {
error(_("commit-graph improper chunk offset %08x%08x"), (uint32_t)(chunk_offset >> 32),
(uint32_t)chunk_offset);
free(graph);
return NULL;
}
switch (chunk_id) {
case GRAPH_CHUNKID_OIDFANOUT:
if (graph->chunk_oid_fanout)
chunk_repeated = 1;
else
graph->chunk_oid_fanout = (uint32_t*)(data + chunk_offset);
break;
case GRAPH_CHUNKID_OIDLOOKUP:
if (graph->chunk_oid_lookup)
chunk_repeated = 1;
else
graph->chunk_oid_lookup = data + chunk_offset;
break;
case GRAPH_CHUNKID_DATA:
if (graph->chunk_commit_data)
chunk_repeated = 1;
else
graph->chunk_commit_data = data + chunk_offset;
break;
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
case GRAPH_CHUNKID_EXTRAEDGES:
if (graph->chunk_extra_edges)
chunk_repeated = 1;
else
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
graph->chunk_extra_edges = data + chunk_offset;
break;
case GRAPH_CHUNKID_BASE:
if (graph->chunk_base_graphs)
chunk_repeated = 1;
else
graph->chunk_base_graphs = data + chunk_offset;
}
if (chunk_repeated) {
error(_("commit-graph chunk id %08x appears multiple times"), chunk_id);
free(graph);
return NULL;
}
if (last_chunk_id == GRAPH_CHUNKID_OIDLOOKUP)
{
graph->num_commits = (chunk_offset - last_chunk_offset)
/ graph->hash_len;
}
last_chunk_id = chunk_id;
last_chunk_offset = chunk_offset;
}
hashcpy(graph->oid.hash, graph->data + graph->data_len - graph->hash_len);
if (verify_commit_graph_lite(graph)) {
free(graph);
commit-graph: fix segfault on e.g. "git status" When core.commitGraph=true is set, various common commands now consult the commit graph. Because the commit-graph code is very trusting of its input data, it's possibly to construct a graph that'll cause an immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In some other cases where git immediately exits with a cryptic error about the graph being broken. The root cause of this is that while the "commit-graph verify" sub-command exhaustively verifies the graph, other users of the graph simply trust the graph, and will e.g. deference data found at certain offsets as pointers, causing segfaults. This change does the bare minimum to ensure that we don't segfault in the common fill_commit_in_graph() codepath called by e.g. setup_revisions(), to do this instrument the "commit-graph verify" tests to always check if "status" would subsequently segfault. This fixes the following tests which would previously segfault: not ok 50 - detect low chunk count not ok 51 - detect missing OID fanout chunk not ok 52 - detect missing OID lookup chunk not ok 53 - detect missing commit data chunk Those happened because with the commit-graph enabled setup_revisions() would eventually call fill_commit_in_graph(), where e.g. g->chunk_commit_data is used early as an offset (and will be 0x0). With this change we get far enough to detect that the graph is broken, and show an error instead. E.g.: $ git status; echo $? error: commit-graph is missing the Commit Data chunk 1 That also sucks, we should *warn* and not hard-fail "status" just because the commit-graph is corrupt, but fixing is left to a follow-up change. A side-effect of changing the reporting from graph_report() to error() is that we now have an "error: " prefix for these even for "commit-graph verify". Pseudo-diff before/after: $ git commit-graph verify -commit-graph is missing the Commit Data chunk +error: commit-graph is missing the Commit Data chunk Changing that is OK. Various errors it emits now early on are prefixed with "error: ", moving these over and changing the output doesn't break anything. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:29 +01:00
return NULL;
}
commit-graph: fix segfault on e.g. "git status" When core.commitGraph=true is set, various common commands now consult the commit graph. Because the commit-graph code is very trusting of its input data, it's possibly to construct a graph that'll cause an immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In some other cases where git immediately exits with a cryptic error about the graph being broken. The root cause of this is that while the "commit-graph verify" sub-command exhaustively verifies the graph, other users of the graph simply trust the graph, and will e.g. deference data found at certain offsets as pointers, causing segfaults. This change does the bare minimum to ensure that we don't segfault in the common fill_commit_in_graph() codepath called by e.g. setup_revisions(), to do this instrument the "commit-graph verify" tests to always check if "status" would subsequently segfault. This fixes the following tests which would previously segfault: not ok 50 - detect low chunk count not ok 51 - detect missing OID fanout chunk not ok 52 - detect missing OID lookup chunk not ok 53 - detect missing commit data chunk Those happened because with the commit-graph enabled setup_revisions() would eventually call fill_commit_in_graph(), where e.g. g->chunk_commit_data is used early as an offset (and will be 0x0). With this change we get far enough to detect that the graph is broken, and show an error instead. E.g.: $ git status; echo $? error: commit-graph is missing the Commit Data chunk 1 That also sucks, we should *warn* and not hard-fail "status" just because the commit-graph is corrupt, but fixing is left to a follow-up change. A side-effect of changing the reporting from graph_report() to error() is that we now have an "error: " prefix for these even for "commit-graph verify". Pseudo-diff before/after: $ git commit-graph verify -commit-graph is missing the Commit Data chunk +error: commit-graph is missing the Commit Data chunk Changing that is OK. Various errors it emits now early on are prefixed with "error: ", moving these over and changing the output doesn't break anything. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:29 +01:00
return graph;
}
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:30 +01:00
static struct commit_graph *load_commit_graph_one(const char *graph_file)
{
struct stat st;
int fd;
struct commit_graph *g;
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:30 +01:00
int open_ok = open_commit_graph(graph_file, &fd, &st);
if (!open_ok)
return NULL;
g = load_commit_graph_one_fd_st(fd, &st);
if (g)
g->filename = xstrdup(graph_file);
return g;
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:30 +01:00
}
static struct commit_graph *load_commit_graph_v1(struct repository *r,
struct object_directory *odb)
{
char *graph_name = get_commit_graph_filename(odb->path);
struct commit_graph *g = load_commit_graph_one(graph_name);
free(graph_name);
if (g)
g->odb = odb;
return g;
}
static int add_graph_to_chain(struct commit_graph *g,
struct commit_graph *chain,
struct object_id *oids,
int n)
{
struct commit_graph *cur_g = chain;
if (n && !g->chunk_base_graphs) {
warning(_("commit-graph has no base graphs chunk"));
return 0;
}
while (n) {
n--;
if (!cur_g ||
!oideq(&oids[n], &cur_g->oid) ||
!hasheq(oids[n].hash, g->chunk_base_graphs + g->hash_len * n)) {
warning(_("commit-graph chain does not match"));
return 0;
}
cur_g = cur_g->base_graph;
}
g->base_graph = chain;
if (chain)
g->num_commits_in_base = chain->num_commits + chain->num_commits_in_base;
return 1;
}
static struct commit_graph *load_commit_graph_chain(struct repository *r,
struct object_directory *odb)
{
struct commit_graph *graph_chain = NULL;
struct strbuf line = STRBUF_INIT;
struct stat st;
struct object_id *oids;
int i = 0, valid = 1, count;
char *chain_name = get_chain_filename(odb->path);
FILE *fp;
int stat_res;
fp = fopen(chain_name, "r");
stat_res = stat(chain_name, &st);
free(chain_name);
if (!fp ||
stat_res ||
st.st_size <= the_hash_algo->hexsz)
return NULL;
count = st.st_size / (the_hash_algo->hexsz + 1);
oids = xcalloc(count, sizeof(struct object_id));
prepare_alt_odb(r);
for (i = 0; i < count; i++) {
struct object_directory *odb;
if (strbuf_getline_lf(&line, fp) == EOF)
break;
if (get_oid_hex(line.buf, &oids[i])) {
warning(_("invalid commit-graph chain: line '%s' not a hash"),
line.buf);
valid = 0;
break;
}
valid = 0;
for (odb = r->objects->odb; odb; odb = odb->next) {
char *graph_name = get_split_graph_filename(odb->path, line.buf);
struct commit_graph *g = load_commit_graph_one(graph_name);
free(graph_name);
if (g) {
g->odb = odb;
if (add_graph_to_chain(g, graph_chain, oids, i)) {
graph_chain = g;
valid = 1;
}
break;
}
}
if (!valid) {
warning(_("unable to find all commit-graph files"));
break;
}
}
free(oids);
fclose(fp);
strbuf_release(&line);
return graph_chain;
}
struct commit_graph *read_commit_graph_one(struct repository *r,
struct object_directory *odb)
{
struct commit_graph *g = load_commit_graph_v1(r, odb);
if (!g)
g = load_commit_graph_chain(r, odb);
return g;
commit-graph: don't early exit(1) on e.g. "git status" Make the commit-graph loading code work as a library that returns an error code instead of calling exit(1) when the commit-graph is corrupt. This means that e.g. "status" will now report commit-graph corruption as an "error: [...]" at the top of its output, but then proceed to work normally. This required splitting up the load_commit_graph_one() function so that the code that deals with open()-ing and stat()-ing the graph can now be called independently as open_commit_graph(). This is needed because "commit-graph verify" where the graph doesn't exist isn't an error. See the third paragraph in 283e68c72f ("commit-graph: add 'verify' subcommand", 2018-06-27). There's a bug in that logic where we conflate the intended ENOENT with other errno values (e.g. EACCES), but this change doesn't address that. That'll be addressed in a follow-up change. I'm then splitting most of the logic out of load_commit_graph_one() into load_commit_graph_one_fd_st(), which allows for providing an existing file descriptor and stat information to the loading code. This isn't strictly needed, but it would be redundant and confusing to open() and stat() the file twice for some of the codepaths, this allows for calling open_commit_graph() followed by load_commit_graph_one_fd_st(). The "graph_file" still needs to be passed to that function for the the "graph file %s is too small" error message. This leaves load_commit_graph_one() unused by everything except the internal prepare_commit_graph_one() function, so let's mark it as "static". If someone needs it in the future we can remove the "static" attribute. I could also rewrite its sole remaining user ("prepare_commit_graph_one()") to use load_commit_graph_one_fd_st() instead, but let's leave it at this. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:30 +01:00
}
static void prepare_commit_graph_one(struct repository *r,
struct object_directory *odb)
{
if (r->objects->commit_graph)
return;
r->objects->commit_graph = read_commit_graph_one(r, odb);
}
/*
* Return 1 if commit_graph is non-NULL, and 0 otherwise.
*
* On the first invocation, this function attempts to load the commit
* graph if the_repository is configured to have one.
*/
static int prepare_commit_graph(struct repository *r)
{
struct object_directory *odb;
upload-pack: disable commit graph more gently for shallow traversal When the client has asked for certain shallow options like "deepen-since", we do a custom rev-list walk that pretends to be shallow. Before doing so, we have to disable the commit-graph, since it is not compatible with the shallow view of the repository. That's handled by 829a321569 (commit-graph: close_commit_graph before shallow walk, 2018-08-20). That commit literally closes and frees our repo->objects->commit_graph struct. That creates an interesting problem for commits that have _already_ been parsed using the commit graph. Their commit->object.parsed flag is set, their commit->graph_pos is set, but their commit->maybe_tree may still be NULL. When somebody later calls repo_get_commit_tree(), we see that we haven't loaded the tree oid yet and try to get it from the commit graph. But since it has been freed, we segfault! So the root of the issue is a data dependency between the commit's lazy-load of the tree oid and the fact that the commit graph can go away mid-process. How can we resolve it? There are a couple of general approaches: 1. The obvious answer is to avoid loading the tree from the graph when we see that it's NULL. But then what do we return for the tree oid? If we return NULL, our caller in do_traverse() will rightly complain that we have no tree. We'd have to fallback to loading the actual commit object and re-parsing it. That requires teaching parse_commit_buffer() to understand re-parsing (i.e., not starting from a clean slate and not leaking any allocated bits like parent list pointers). 2. When we close the commit graph, walk through the set of in-memory objects and clear any graph_pos pointers. But this means we also have to "unparse" any such commits so that we know they still need to open the commit object to fill in their trees. So it's no less complicated than (1), and is more expensive (since we clear objects we might not later need). 3. Stop freeing the commit-graph struct. Continue to let it be used for lazy-loads of tree oids, but let upload-pack specify that it shouldn't be used for further commit parsing. 4. Push the whole shallow rev-list out to its own sub-process, with the commit-graph disabled from the start, giving it a clean memory space to work from. I've chosen (3) here. Options (1) and (2) would work, but are non-trivial to implement. Option (4) is more expensive, and I'm not sure how complicated it is (shelling out for the actual rev-list part is easy, but we do then parse the resulting commits internally, and I'm not clear which parts need to be handling shallow-ness). The new test in t5500 triggers this segfault, but see the comments there for how horribly intimate it has to be with how both upload-pack and commit graphs work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 16:44:45 +02:00
/*
* This must come before the "already attempted?" check below, because
* we want to disable even an already-loaded graph file.
*/
if (r->commit_graph_disabled)
return 0;
commit-graph write: don't die if the existing graph is corrupt When the commit-graph is written we end up calling parse_commit(). This will in turn invoke code that'll consult the existing commit-graph about the commit, if the graph is corrupted we die. We thus get into a state where a failing "commit-graph verify" can't be followed-up with a "commit-graph write" if core.commitGraph=true is set, the graph either needs to be manually removed to proceed, or core.commitGraph needs to be set to "false". Change the "commit-graph write" codepath to use a new parse_commit_no_graph() helper instead of parse_commit() to avoid this. The latter will call repo_parse_commit_internal() with use_commit_graph=1 as seen in 177722b344 ("commit: integrate commit graph with commit parsing", 2018-04-10). Not using the old graph at all slows down the writing of the new graph by some small amount, but is a sensible way to prevent an error in the existing commit-graph from spreading. Just fixing the current issue would be likely to result in code that's inadvertently broken in the future. New code might use the commit-graph at a distance. To detect such cases introduce a "GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD" setting used when we do our corruption tests, and test that a "write/verify" combo works after every one of our current test cases where we now detect commit-graph corruption. Some of the code changes here might be strictly unnecessary, e.g. I was unable to find cases where the parse_commit() called from write_graph_chunk_data() didn't exit early due to "item->object.parsed" being true in repo_parse_commit_internal() (before the use_commit_graph=1 has any effect). But let's also convert those cases for good measure, we do not have exhaustive tests for all possible types of commit-graph corruption. This might need to be re-visited if we learn to write the commit-graph incrementally, but probably not. Hopefully we'll just start by finding out what commits we have in total, then read the old graph(s) to see what they cover, and finally write a new graph file with everything that's missing. In that case the new graph writing code just needs to continue to use e.g. a parse_commit() that doesn't consult the existing commit-graphs. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:33 +01:00
if (r->objects->commit_graph_attempted)
return !!r->objects->commit_graph;
r->objects->commit_graph_attempted = 1;
commit-graph: bump DIE_ON_LOAD check to actual load-time Commit 43d3561805 (commit-graph write: don't die if the existing graph is corrupt, 2019-03-25) added an environment variable we use only in the test suite, $GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD. But it put the check for this variable at the very top of prepare_commit_graph(), which is called every time we want to use the commit graph. Most importantly, it comes _before_ we check the fast-path "did we already try to load?", meaning we end up calling getenv() for every single use of the commit graph, rather than just when we load. getenv() is allowed to have unexpected side effects, but that shouldn't be a problem here; we're lazy-loading the graph so it's clear that at least _one_ invocation of this function is going to call it. But it is inefficient. getenv() typically has to do a linear search through the environment space. We could memoize the call, but it's simpler still to just bump the check down to the actual loading step. That's fine for our sole user in t5318, and produces this minor real-world speedup: [before] Benchmark #1: git -C linux rev-list HEAD >/dev/null Time (mean ± σ): 1.460 s ± 0.017 s [User: 1.174 s, System: 0.285 s] Range (min … max): 1.440 s … 1.491 s 10 runs [after] Benchmark #1: git -C linux rev-list HEAD >/dev/null Time (mean ± σ): 1.391 s ± 0.005 s [User: 1.118 s, System: 0.273 s] Range (min … max): 1.385 s … 1.399 s 10 runs Of course that actual speedup depends on how big your environment is. We can game it like this: for i in $(seq 10000); do export dummy$i=$i done in which case I get: [before] Benchmark #1: git -C linux rev-list HEAD >/dev/null Time (mean ± σ): 6.257 s ± 0.061 s [User: 6.005 s, System: 0.250 s] Range (min … max): 6.174 s … 6.337 s 10 runs [after] Benchmark #1: git -C linux rev-list HEAD >/dev/null Time (mean ± σ): 1.403 s ± 0.005 s [User: 1.146 s, System: 0.256 s] Range (min … max): 1.396 s … 1.412 s 10 runs So this is really more about avoiding the pathological case than providing a big real-world speedup. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 16:44:34 +02:00
if (git_env_bool(GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD, 0))
die("dying as requested by the '%s' variable on commit-graph load!",
GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD);
prepare_repo_settings(r);
if (!git_env_bool(GIT_TEST_COMMIT_GRAPH, 0) &&
r->settings.core_commit_graph != 1)
/*
* This repository is not configured to use commit graphs, so
* do not load one. (But report commit_graph_attempted anyway
* so that commit graph loading is not attempted again for this
* repository.)
*/
return 0;
if (!commit_graph_compatible(r))
return 0;
prepare_alt_odb(r);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
for (odb = r->objects->odb;
!r->objects->commit_graph && odb;
odb = odb->next)
prepare_commit_graph_one(r, odb);
return !!r->objects->commit_graph;
}
commit-reach: use can_all_from_reach The is_descendant_of method previously used in_merge_bases() to check if the commit can reach any of the commits in the provided list. This had two performance problems: 1. The performance is quadratic in worst-case. 2. A single in_merge_bases() call requires walking beyond the target commit in order to find the full set of boundary commits that may be merge-bases. The can_all_from_reach method avoids this quadratic behavior and can limit the search beyond the target commits using generation numbers. It requires a small prototype adjustment to stop using commit-date as a cutoff, as that optimization is no longer appropriate here. Since in_merge_bases() uses paint_down_to_common(), is_descendant_of() naturally found cutoffs to avoid walking the entire commit graph. Since we want to always return the correct result, we cannot use the min_commit_date cutoff in can_all_from_reach. We then rely on generation numbers to provide the cutoff. Since not all repos will have a commit-graph file, nor will we always have generation numbers computed for a commit-graph file, create a new method, generation_numbers_enabled(), that checks for a commit-graph file and sees if the first commit in the file has a non-zero generation number. In the case that we do not have generation numbers, use the old logic for is_descendant_of(). Performance was meausured on a copy of the Linux repository using the 'test-tool reach is_descendant_of' command using this input: A:v4.9 X:v4.10 X:v4.11 X:v4.12 X:v4.13 X:v4.14 X:v4.15 X:v4.16 X:v4.17 X.v3.0 Note that this input is tailored to demonstrate the quadratic nature of the previous method, as it will compute merge-bases for v4.9 versus all of the later versions before checking against v4.1. Before: 0.26 s After: 0.21 s Since we previously used the is_descendant_of method in the ref_newer method, we also measured performance there using 'test-tool reach ref_newer' with this input: A:v4.9 B:v3.19 Before: 0.10 s After: 0.08 s By adding a new commit with parent v3.19, we test the non-reachable case of ref_newer: Before: 0.09 s After: 0.08 s Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20 18:33:30 +02:00
int generation_numbers_enabled(struct repository *r)
{
uint32_t first_generation;
struct commit_graph *g;
if (!prepare_commit_graph(r))
return 0;
g = r->objects->commit_graph;
if (!g->num_commits)
return 0;
first_generation = get_be32(g->chunk_commit_data +
g->hash_len + 8) >> 2;
return !!first_generation;
}
static void close_commit_graph_one(struct commit_graph *g)
{
if (!g)
return;
close_commit_graph_one(g->base_graph);
free_commit_graph(g);
}
void close_commit_graph(struct raw_object_store *o)
{
close_commit_graph_one(o->commit_graph);
o->commit_graph = NULL;
}
static int bsearch_graph(struct commit_graph *g, struct object_id *oid, uint32_t *pos)
{
return bsearch_hash(oid->hash, g->chunk_oid_fanout,
g->chunk_oid_lookup, g->hash_len, pos);
}
static void load_oid_from_graph(struct commit_graph *g,
uint32_t pos,
struct object_id *oid)
{
uint32_t lex_index;
while (g && pos < g->num_commits_in_base)
g = g->base_graph;
if (!g)
BUG("NULL commit-graph");
if (pos >= g->num_commits + g->num_commits_in_base)
die(_("invalid commit position. commit-graph is likely corrupt"));
lex_index = pos - g->num_commits_in_base;
hashcpy(oid->hash, g->chunk_oid_lookup + g->hash_len * lex_index);
}
static struct commit_list **insert_parent_or_die(struct repository *r,
struct commit_graph *g,
uint32_t pos,
struct commit_list **pptr)
{
struct commit *c;
struct object_id oid;
if (pos >= g->num_commits + g->num_commits_in_base)
die("invalid parent position %"PRIu32, pos);
load_oid_from_graph(g, pos, &oid);
c = lookup_commit(r, &oid);
if (!c)
die(_("could not find commit %s"), oid_to_hex(&oid));
c->graph_pos = pos;
return &commit_list_insert(c, pptr)->next;
}
static void fill_commit_graph_info(struct commit *item, struct commit_graph *g, uint32_t pos)
{
const unsigned char *commit_data;
uint32_t lex_index;
while (pos < g->num_commits_in_base)
g = g->base_graph;
lex_index = pos - g->num_commits_in_base;
commit_data = g->chunk_commit_data + GRAPH_DATA_WIDTH * lex_index;
item->graph_pos = pos;
item->generation = get_be32(commit_data + g->hash_len + 8) >> 2;
}
static inline void set_commit_tree(struct commit *c, struct tree *t)
{
c->maybe_tree = t;
}
static int fill_commit_in_graph(struct repository *r,
struct commit *item,
struct commit_graph *g, uint32_t pos)
{
uint32_t edge_value;
uint32_t *parent_data_ptr;
uint64_t date_low, date_high;
struct commit_list **pptr;
const unsigned char *commit_data;
uint32_t lex_index;
while (pos < g->num_commits_in_base)
g = g->base_graph;
if (pos >= g->num_commits + g->num_commits_in_base)
die(_("invalid commit position. commit-graph is likely corrupt"));
/*
* Store the "full" position, but then use the
* "local" position for the rest of the calculation.
*/
item->graph_pos = pos;
lex_index = pos - g->num_commits_in_base;
commit_data = g->chunk_commit_data + (g->hash_len + 16) * lex_index;
item->object.parsed = 1;
set_commit_tree(item, NULL);
date_high = get_be32(commit_data + g->hash_len + 8) & 0x3;
date_low = get_be32(commit_data + g->hash_len + 12);
item->date = (timestamp_t)((date_high << 32) | date_low);
item->generation = get_be32(commit_data + g->hash_len + 8) >> 2;
pptr = &item->parents;
edge_value = get_be32(commit_data + g->hash_len);
if (edge_value == GRAPH_PARENT_NONE)
return 1;
pptr = insert_parent_or_die(r, g, edge_value, pptr);
edge_value = get_be32(commit_data + g->hash_len + 4);
if (edge_value == GRAPH_PARENT_NONE)
return 1;
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
if (!(edge_value & GRAPH_EXTRA_EDGES_NEEDED)) {
pptr = insert_parent_or_die(r, g, edge_value, pptr);
return 1;
}
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
parent_data_ptr = (uint32_t*)(g->chunk_extra_edges +
4 * (uint64_t)(edge_value & GRAPH_EDGE_LAST_MASK));
do {
edge_value = get_be32(parent_data_ptr);
pptr = insert_parent_or_die(r, g,
edge_value & GRAPH_EDGE_LAST_MASK,
pptr);
parent_data_ptr++;
} while (!(edge_value & GRAPH_LAST_EDGE));
return 1;
}
static int find_commit_in_graph(struct commit *item, struct commit_graph *g, uint32_t *pos)
{
if (item->graph_pos != COMMIT_NOT_FROM_GRAPH) {
*pos = item->graph_pos;
return 1;
} else {
struct commit_graph *cur_g = g;
uint32_t lex_index;
while (cur_g && !bsearch_graph(cur_g, &(item->object.oid), &lex_index))
cur_g = cur_g->base_graph;
if (cur_g) {
*pos = lex_index + cur_g->num_commits_in_base;
return 1;
}
return 0;
}
}
static int parse_commit_in_graph_one(struct repository *r,
struct commit_graph *g,
struct commit *item)
{
uint32_t pos;
if (item->object.parsed)
return 1;
if (find_commit_in_graph(item, g, &pos))
return fill_commit_in_graph(r, item, g, pos);
return 0;
}
int parse_commit_in_graph(struct repository *r, struct commit *item)
{
if (!prepare_commit_graph(r))
return 0;
return parse_commit_in_graph_one(r, r->objects->commit_graph, item);
}
void load_commit_graph_info(struct repository *r, struct commit *item)
{
uint32_t pos;
if (!prepare_commit_graph(r))
return;
if (find_commit_in_graph(item, r->objects->commit_graph, &pos))
fill_commit_graph_info(item, r->objects->commit_graph, pos);
}
static struct tree *load_tree_for_commit(struct repository *r,
struct commit_graph *g,
struct commit *c)
{
struct object_id oid;
const unsigned char *commit_data;
while (c->graph_pos < g->num_commits_in_base)
g = g->base_graph;
commit_data = g->chunk_commit_data +
GRAPH_DATA_WIDTH * (c->graph_pos - g->num_commits_in_base);
hashcpy(oid.hash, commit_data);
set_commit_tree(c, lookup_tree(r, &oid));
return c->maybe_tree;
}
static struct tree *get_commit_tree_in_graph_one(struct repository *r,
struct commit_graph *g,
const struct commit *c)
{
if (c->maybe_tree)
return c->maybe_tree;
if (c->graph_pos == COMMIT_NOT_FROM_GRAPH)
BUG("get_commit_tree_in_graph_one called from non-commit-graph commit");
return load_tree_for_commit(r, g, (struct commit *)c);
}
struct tree *get_commit_tree_in_graph(struct repository *r, const struct commit *c)
{
return get_commit_tree_in_graph_one(r, r->objects->commit_graph, c);
}
struct packed_commit_list {
struct commit **list;
int nr;
int alloc;
};
struct packed_oid_list {
struct object_id *list;
int nr;
int alloc;
};
struct write_commit_graph_context {
struct repository *r;
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
struct object_directory *odb;
char *graph_name;
struct packed_oid_list oids;
struct packed_commit_list commits;
int num_extra_edges;
unsigned long approx_nr_objects;
struct progress *progress;
int progress_done;
uint64_t progress_cnt;
char *base_graph_name;
int num_commit_graphs_before;
int num_commit_graphs_after;
char **commit_graph_filenames_before;
char **commit_graph_filenames_after;
char **commit_graph_hash_after;
uint32_t new_num_commits_in_base;
struct commit_graph *new_base_graph;
unsigned append:1,
report_progress:1,
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 10:02:40 +02:00
split:1,
check_oids:1;
const struct split_commit_graph_opts *split_opts;
};
static void write_graph_chunk_fanout(struct hashfile *f,
struct write_commit_graph_context *ctx)
{
int i, count = 0;
struct commit **list = ctx->commits.list;
/*
* Write the first-level table (the list is sorted,
* but we use a 256-entry lookup to be able to avoid
* having to do eight extra binary search iterations).
*/
for (i = 0; i < 256; i++) {
while (count < ctx->commits.nr) {
if ((*list)->object.oid.hash[0] != i)
break;
display_progress(ctx->progress, ++ctx->progress_cnt);
count++;
list++;
}
hashwrite_be32(f, count);
}
}
static void write_graph_chunk_oids(struct hashfile *f, int hash_len,
struct write_commit_graph_context *ctx)
{
struct commit **list = ctx->commits.list;
int count;
for (count = 0; count < ctx->commits.nr; count++, list++) {
display_progress(ctx->progress, ++ctx->progress_cnt);
hashwrite(f, (*list)->object.oid.hash, (int)hash_len);
}
}
static const unsigned char *commit_to_sha1(size_t index, void *table)
{
struct commit **commits = table;
return commits[index]->object.oid.hash;
}
static void write_graph_chunk_data(struct hashfile *f, int hash_len,
struct write_commit_graph_context *ctx)
{
struct commit **list = ctx->commits.list;
struct commit **last = ctx->commits.list + ctx->commits.nr;
uint32_t num_extra_edges = 0;
while (list < last) {
struct commit_list *parent;
struct object_id *tree;
int edge_value;
uint32_t packedDate[2];
display_progress(ctx->progress, ++ctx->progress_cnt);
2019-09-06 00:04:55 +02:00
if (parse_commit_no_graph(*list))
die(_("unable to parse commit %s"),
oid_to_hex(&(*list)->object.oid));
tree = get_commit_tree_oid(*list);
hashwrite(f, tree->hash, hash_len);
parent = (*list)->parents;
if (!parent)
edge_value = GRAPH_PARENT_NONE;
else {
edge_value = sha1_pos(parent->item->object.oid.hash,
ctx->commits.list,
ctx->commits.nr,
commit_to_sha1);
if (edge_value >= 0)
edge_value += ctx->new_num_commits_in_base;
else {
uint32_t pos;
if (find_commit_in_graph(parent->item,
ctx->new_base_graph,
&pos))
edge_value = pos;
}
if (edge_value < 0)
BUG("missing parent %s for commit %s",
oid_to_hex(&parent->item->object.oid),
oid_to_hex(&(*list)->object.oid));
}
hashwrite_be32(f, edge_value);
if (parent)
parent = parent->next;
if (!parent)
edge_value = GRAPH_PARENT_NONE;
else if (parent->next)
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
edge_value = GRAPH_EXTRA_EDGES_NEEDED | num_extra_edges;
else {
edge_value = sha1_pos(parent->item->object.oid.hash,
ctx->commits.list,
ctx->commits.nr,
commit_to_sha1);
if (edge_value >= 0)
edge_value += ctx->new_num_commits_in_base;
else {
uint32_t pos;
if (find_commit_in_graph(parent->item,
ctx->new_base_graph,
&pos))
edge_value = pos;
}
if (edge_value < 0)
BUG("missing parent %s for commit %s",
oid_to_hex(&parent->item->object.oid),
oid_to_hex(&(*list)->object.oid));
}
hashwrite_be32(f, edge_value);
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
if (edge_value & GRAPH_EXTRA_EDGES_NEEDED) {
do {
num_extra_edges++;
parent = parent->next;
} while (parent);
}
if (sizeof((*list)->date) > 4)
packedDate[0] = htonl(((*list)->date >> 32) & 0x3);
else
packedDate[0] = 0;
packedDate[0] |= htonl((*list)->generation << 2);
packedDate[1] = htonl((*list)->date);
hashwrite(f, packedDate, 8);
list++;
}
}
commit-graph: rename "large edges" to "extra edges" The optional 'Large Edge List' chunk of the commit graph file stores parent information for commits with more than two parents, and the names of most of the macros, variables, struct fields, and functions related to this chunk contain the term "large edges", e.g. write_graph_chunk_large_edges(). However, it's not a really great term, as the edges to the second and subsequent parents stored in this chunk are not any larger than the edges to the first and second parents stored in the "main" 'Commit Data' chunk. It's the number of edges, IOW number of parents, that is larger compared to non-merge and "regular" two-parent merge commits. And indeed, two functions in 'commit-graph.c' have a local variable called 'num_extra_edges' that refer to the same thing, and this "extra edges" term is much better at describing these edges. So let's rename all these references to "large edges" in macro, variable, function, etc. names to "extra edges". There is a GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency rename it to GRAPH_EXTRA_EDGES_NEEDED. We can do so safely without causing any incompatibility issues, because the term "large edges" doesn't come up in the file format itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there is no 'L' in there), but only in the specification text. The string "large edges", however, does come up in the output of 'git commit-graph read' and in tests looking at its input, but that command is explicitly documented as debugging aid, so we can change its output and the affected tests safely. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:13 +01:00
static void write_graph_chunk_extra_edges(struct hashfile *f,
struct write_commit_graph_context *ctx)
{
struct commit **list = ctx->commits.list;
struct commit **last = ctx->commits.list + ctx->commits.nr;
struct commit_list *parent;
while (list < last) {
int num_parents = 0;
display_progress(ctx->progress, ++ctx->progress_cnt);
for (parent = (*list)->parents; num_parents < 3 && parent;
parent = parent->next)
num_parents++;
if (num_parents <= 2) {
list++;
continue;
}
/* Since num_parents > 2, this initializer is safe. */
for (parent = (*list)->parents->next; parent; parent = parent->next) {
int edge_value = sha1_pos(parent->item->object.oid.hash,
ctx->commits.list,
ctx->commits.nr,
commit_to_sha1);
if (edge_value >= 0)
edge_value += ctx->new_num_commits_in_base;
else {
uint32_t pos;
if (find_commit_in_graph(parent->item,
ctx->new_base_graph,
&pos))
edge_value = pos;
}
if (edge_value < 0)
BUG("missing parent %s for commit %s",
oid_to_hex(&parent->item->object.oid),
oid_to_hex(&(*list)->object.oid));
else if (!parent->next)
edge_value |= GRAPH_LAST_EDGE;
hashwrite_be32(f, edge_value);
}
list++;
}
}
static int oid_compare(const void *_a, const void *_b)
{
const struct object_id *a = (const struct object_id *)_a;
const struct object_id *b = (const struct object_id *)_b;
return oidcmp(a, b);
}
static int add_packed_commits(const struct object_id *oid,
struct packed_git *pack,
uint32_t pos,
void *data)
{
struct write_commit_graph_context *ctx = (struct write_commit_graph_context*)data;
enum object_type type;
off_t offset = nth_packed_object_offset(pack, pos);
struct object_info oi = OBJECT_INFO_INIT;
if (ctx->progress)
display_progress(ctx->progress, ++ctx->progress_done);
commit-graph write: add progress output Before this change the "commit-graph write" command didn't report any progress. On my machine this command takes more than 10 seconds to write the graph for linux.git, and around 1m30s on the 2015-04-03-1M-git.git[1] test repository (a test case for a large monorepository). Furthermore, since the gc.writeCommitGraph setting was added in d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27), there was no indication at all from a "git gc" run that anything was different. This why one of the progress bars being added here uses start_progress() instead of start_delayed_progress(), so that it's guaranteed to be seen. E.g. on my tiny 867 commit dotfiles.git repository: $ git -c gc.writeCommitGraph=true gc Enumerating objects: 2821, done. [...] Computing commit graph generation numbers: 100% (867/867), done. On larger repositories, such as linux.git the delayed progress bar(s) will kick in, and we'll show what's going on instead of, as was previously happening, printing nothing while we write the graph: $ git -c gc.writeCommitGraph=true gc [...] Annotating commits in commit graph: 1565573, done. Computing commit graph generation numbers: 100% (782484/782484), done. Note that here we don't show "Finding commits for commit graph", this is because under "git gc" we seed the search with the commit references in the repository, and that set is too small to show any progress, but would e.g. on a smaller repo such as git.git with --stdin-commits: $ git rev-list --all | git -c gc.writeCommitGraph=true write --stdin-commits Finding commits for commit graph: 100% (162576/162576), done. Computing commit graph generation numbers: 100% (162576/162576), done. With --stdin-packs we don't show any estimation of how much is left to do. This is because we might be processing more than one pack. We could be less lazy here and show progress, either by detecting that we're only processing one pack, or by first looping over the packs to discover how many commits they have. I don't see the point in doing that work. So instead we get (on 2015-04-03-1M-git.git): $ echo pack-<HASH>.idx | git -c gc.writeCommitGraph=true --exec-path=$PWD commit-graph write --stdin-packs Finding commits for commit graph: 13064614, done. Annotating commits in commit graph: 3001341, done. Computing commit graph generation numbers: 100% (1000447/1000447), done. No GC mode uses --stdin-packs. It's what they use at Microsoft to manually compute the generation numbers for their collection of large packs which are never coalesced. The reason we need a "report_progress" variable passed down from "git gc" is so that we don't report this output when we're running in the process "git gc --auto" detaches from the terminal. Since we write the commit graph from the "git gc" process itself (as opposed to what we do with say the "git repack" phase), we'd end up writing the output to .git/gc.log and reporting it to the user next time as part of the "The last gc run reported the following[...]" error, see 329e6e8794 ("gc: save log from daemonized gc --auto and print it next time", 2015-09-19). So we must keep track of whether or not we're running in that demonized mode, and if so print no progress. See [2] and subsequent replies for a discussion of an approach not taken in compute_generation_numbers(). I.e. we're saying "Computing commit graph generation numbers", even though on an established history we're mostly skipping over all the work we did in the past. This is similar to the white lie we tell in the "Writing objects" phase (not all are objects being written). Always showing progress is considered more important than accuracy. I.e. on a repository like 2015-04-03-1M-git.git we'd hang for 6 seconds with no output on the second "git gc" if no changes were made to any objects in the interim if we'd take the approach in [2]. 1. https://github.com/avar/2015-04-03-1M-git 2. <c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com> (https://public-inbox.org/git/c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com/) Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17 17:33:35 +02:00
oi.typep = &type;
if (packed_object_info(ctx->r, pack, offset, &oi) < 0)
die(_("unable to get type of object %s"), oid_to_hex(oid));
if (type != OBJ_COMMIT)
return 0;
ALLOC_GROW(ctx->oids.list, ctx->oids.nr + 1, ctx->oids.alloc);
oidcpy(&(ctx->oids.list[ctx->oids.nr]), oid);
ctx->oids.nr++;
return 0;
}
static void add_missing_parents(struct write_commit_graph_context *ctx, struct commit *commit)
{
struct commit_list *parent;
for (parent = commit->parents; parent; parent = parent->next) {
commit-graph: fix writing first commit-graph during fetch The previous commit includes a failing test for an issue around fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we fix that bug and set the test to "test_expect_success". The problem arises with this set of commands when the remote repo at <url> has a submodule. Note that --recurse-submodules is not needed to demonstrate the bug. $ git clone <url> test $ cd test $ git -c fetch.writeCommitGraph=true fetch origin Computing commit graph generation numbers: 100% (12/12), done. BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2> Aborted (core dumped) As an initial fix, I converted the code in builtin/fetch.c that calls write_commit_graph_reachable() to instead launch a "git commit-graph write --reachable --split" process. That code worked, but is not how we want the feature to work long-term. That test did demonstrate that the issue must be something to do with internal state of the 'git fetch' process. The write_commit_graph() method in commit-graph.c ensures the commits we plan to write are "closed under reachability" using close_reachable(). This method walks from the input commits, and uses the UNINTERESTING flag to mark which commits have already been visited. This allows the walk to take O(N) time, where N is the number of commits, instead of O(P) time, where P is the number of paths. (The number of paths can be exponential in the number of commits.) However, the UNINTERESTING flag is used in lots of places in the codebase. This flag usually means some barrier to stop a commit walk, such as in revision-walking to compare histories. It is not often cleared after the walk completes because the starting points of those walks do not have the UNINTERESTING flag, and clear_commit_marks() would stop immediately. This is happening during a 'git fetch' call with a remote. The fetch negotiation is comparing the remote refs with the local refs and marking some commits as UNINTERESTING. I tested running clear_commit_marks_many() to clear the UNINTERESTING flag inside close_reachable(), but the tips did not have the flag, so that did nothing. It turns out that the calculate_changed_submodule_paths() method is at fault. Thanks, Peff, for pointing out this detail! More specifically, for each submodule, the collect_changed_submodules() runs a revision walk to essentially do file-history on the list of submodules. That revision walk marks commits UNININTERESTING if they are simplified away by not changing the submodule. Instead, I finally arrived on the conclusion that I should use a flag that is not used in any other part of the code. In commit-reach.c, a number of flags were defined for commit walk algorithms. The REACHABLE flag seemed like it made the most sense, and it seems it was not actually used in the file. The REACHABLE flag was used in early versions of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make can_all_from_reach... linear, 2018-07-20). Add the REACHABLE flag to commit-graph.c and use it instead of UNINTERESTING in close_reachable(). This fixes the bug in manual testing. Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Helped-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 15:40:42 +02:00
if (!(parent->item->object.flags & REACHABLE)) {
ALLOC_GROW(ctx->oids.list, ctx->oids.nr + 1, ctx->oids.alloc);
oidcpy(&ctx->oids.list[ctx->oids.nr], &(parent->item->object.oid));
ctx->oids.nr++;
commit-graph: fix writing first commit-graph during fetch The previous commit includes a failing test for an issue around fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we fix that bug and set the test to "test_expect_success". The problem arises with this set of commands when the remote repo at <url> has a submodule. Note that --recurse-submodules is not needed to demonstrate the bug. $ git clone <url> test $ cd test $ git -c fetch.writeCommitGraph=true fetch origin Computing commit graph generation numbers: 100% (12/12), done. BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2> Aborted (core dumped) As an initial fix, I converted the code in builtin/fetch.c that calls write_commit_graph_reachable() to instead launch a "git commit-graph write --reachable --split" process. That code worked, but is not how we want the feature to work long-term. That test did demonstrate that the issue must be something to do with internal state of the 'git fetch' process. The write_commit_graph() method in commit-graph.c ensures the commits we plan to write are "closed under reachability" using close_reachable(). This method walks from the input commits, and uses the UNINTERESTING flag to mark which commits have already been visited. This allows the walk to take O(N) time, where N is the number of commits, instead of O(P) time, where P is the number of paths. (The number of paths can be exponential in the number of commits.) However, the UNINTERESTING flag is used in lots of places in the codebase. This flag usually means some barrier to stop a commit walk, such as in revision-walking to compare histories. It is not often cleared after the walk completes because the starting points of those walks do not have the UNINTERESTING flag, and clear_commit_marks() would stop immediately. This is happening during a 'git fetch' call with a remote. The fetch negotiation is comparing the remote refs with the local refs and marking some commits as UNINTERESTING. I tested running clear_commit_marks_many() to clear the UNINTERESTING flag inside close_reachable(), but the tips did not have the flag, so that did nothing. It turns out that the calculate_changed_submodule_paths() method is at fault. Thanks, Peff, for pointing out this detail! More specifically, for each submodule, the collect_changed_submodules() runs a revision walk to essentially do file-history on the list of submodules. That revision walk marks commits UNININTERESTING if they are simplified away by not changing the submodule. Instead, I finally arrived on the conclusion that I should use a flag that is not used in any other part of the code. In commit-reach.c, a number of flags were defined for commit walk algorithms. The REACHABLE flag seemed like it made the most sense, and it seems it was not actually used in the file. The REACHABLE flag was used in early versions of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make can_all_from_reach... linear, 2018-07-20). Add the REACHABLE flag to commit-graph.c and use it instead of UNINTERESTING in close_reachable(). This fixes the bug in manual testing. Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Helped-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 15:40:42 +02:00
parent->item->object.flags |= REACHABLE;
}
}
}
static void close_reachable(struct write_commit_graph_context *ctx)
{
int i;
struct commit *commit;
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
_("Loading known commits in commit graph"),
ctx->oids.nr);
for (i = 0; i < ctx->oids.nr; i++) {
display_progress(ctx->progress, i + 1);
commit = lookup_commit(ctx->r, &ctx->oids.list[i]);
if (commit)
commit-graph: fix writing first commit-graph during fetch The previous commit includes a failing test for an issue around fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we fix that bug and set the test to "test_expect_success". The problem arises with this set of commands when the remote repo at <url> has a submodule. Note that --recurse-submodules is not needed to demonstrate the bug. $ git clone <url> test $ cd test $ git -c fetch.writeCommitGraph=true fetch origin Computing commit graph generation numbers: 100% (12/12), done. BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2> Aborted (core dumped) As an initial fix, I converted the code in builtin/fetch.c that calls write_commit_graph_reachable() to instead launch a "git commit-graph write --reachable --split" process. That code worked, but is not how we want the feature to work long-term. That test did demonstrate that the issue must be something to do with internal state of the 'git fetch' process. The write_commit_graph() method in commit-graph.c ensures the commits we plan to write are "closed under reachability" using close_reachable(). This method walks from the input commits, and uses the UNINTERESTING flag to mark which commits have already been visited. This allows the walk to take O(N) time, where N is the number of commits, instead of O(P) time, where P is the number of paths. (The number of paths can be exponential in the number of commits.) However, the UNINTERESTING flag is used in lots of places in the codebase. This flag usually means some barrier to stop a commit walk, such as in revision-walking to compare histories. It is not often cleared after the walk completes because the starting points of those walks do not have the UNINTERESTING flag, and clear_commit_marks() would stop immediately. This is happening during a 'git fetch' call with a remote. The fetch negotiation is comparing the remote refs with the local refs and marking some commits as UNINTERESTING. I tested running clear_commit_marks_many() to clear the UNINTERESTING flag inside close_reachable(), but the tips did not have the flag, so that did nothing. It turns out that the calculate_changed_submodule_paths() method is at fault. Thanks, Peff, for pointing out this detail! More specifically, for each submodule, the collect_changed_submodules() runs a revision walk to essentially do file-history on the list of submodules. That revision walk marks commits UNININTERESTING if they are simplified away by not changing the submodule. Instead, I finally arrived on the conclusion that I should use a flag that is not used in any other part of the code. In commit-reach.c, a number of flags were defined for commit walk algorithms. The REACHABLE flag seemed like it made the most sense, and it seems it was not actually used in the file. The REACHABLE flag was used in early versions of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make can_all_from_reach... linear, 2018-07-20). Add the REACHABLE flag to commit-graph.c and use it instead of UNINTERESTING in close_reachable(). This fixes the bug in manual testing. Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Helped-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 15:40:42 +02:00
commit->object.flags |= REACHABLE;
}
stop_progress(&ctx->progress);
/*
* As this loop runs, ctx->oids.nr may grow, but not more
* than the number of missing commits in the reachable
* closure.
*/
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
_("Expanding reachable commits in commit graph"),
commit-graph: don't show progress percentages while expanding reachable commits Commit 49bbc57a57 (commit-graph write: emit a percentage for all progress, 2019-01-19) was a bit overeager when it added progress percentages to the "Expanding reachable commits in commit graph" phase as well, because most of the time the number of commits that phase has to iterate over is not known in advance and grows significantly, and, consequently, we end up with nonsensical numbers: $ git commit-graph write --reachable Expanding reachable commits in commit graph: 138606% (824706/595), done. [...] $ git rev-parse v5.0 | git commit-graph write --stdin-commits Expanding reachable commits in commit graph: 81264400% (812644/1), done. [...] Even worse, because the percentage grows so quickly, the progress code outputs much more often than it should (because it ticks every second, or every 1%), slowing the whole process down. My time for "git commit-graph write --reachable" on linux.git went from 13.463s to 12.521s with this patch, ~7% savings. Therefore, don't show progress percentages in the "Expanding reachable commits in commit graph" phase. Note that the current code does sometimes do the right thing, if we picked up all commits initially (e.g., omitting "--reachable" in a fully-packed repository would get the correct count without any parent traversal). So it may be possible to come up with a way to tell when we could use a percentage here. But in the meantime, let's make sure we robustly avoid printing nonsense. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-07 07:01:33 +02:00
0);
for (i = 0; i < ctx->oids.nr; i++) {
display_progress(ctx->progress, i + 1);
commit = lookup_commit(ctx->r, &ctx->oids.list[i]);
if (!commit)
continue;
if (ctx->split) {
if (!parse_commit(commit) &&
commit->graph_pos == COMMIT_NOT_FROM_GRAPH)
add_missing_parents(ctx, commit);
} else if (!parse_commit_no_graph(commit))
add_missing_parents(ctx, commit);
}
stop_progress(&ctx->progress);
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
_("Clearing commit marks in commit graph"),
ctx->oids.nr);
for (i = 0; i < ctx->oids.nr; i++) {
display_progress(ctx->progress, i + 1);
commit = lookup_commit(ctx->r, &ctx->oids.list[i]);
if (commit)
commit-graph: fix writing first commit-graph during fetch The previous commit includes a failing test for an issue around fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we fix that bug and set the test to "test_expect_success". The problem arises with this set of commands when the remote repo at <url> has a submodule. Note that --recurse-submodules is not needed to demonstrate the bug. $ git clone <url> test $ cd test $ git -c fetch.writeCommitGraph=true fetch origin Computing commit graph generation numbers: 100% (12/12), done. BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2> Aborted (core dumped) As an initial fix, I converted the code in builtin/fetch.c that calls write_commit_graph_reachable() to instead launch a "git commit-graph write --reachable --split" process. That code worked, but is not how we want the feature to work long-term. That test did demonstrate that the issue must be something to do with internal state of the 'git fetch' process. The write_commit_graph() method in commit-graph.c ensures the commits we plan to write are "closed under reachability" using close_reachable(). This method walks from the input commits, and uses the UNINTERESTING flag to mark which commits have already been visited. This allows the walk to take O(N) time, where N is the number of commits, instead of O(P) time, where P is the number of paths. (The number of paths can be exponential in the number of commits.) However, the UNINTERESTING flag is used in lots of places in the codebase. This flag usually means some barrier to stop a commit walk, such as in revision-walking to compare histories. It is not often cleared after the walk completes because the starting points of those walks do not have the UNINTERESTING flag, and clear_commit_marks() would stop immediately. This is happening during a 'git fetch' call with a remote. The fetch negotiation is comparing the remote refs with the local refs and marking some commits as UNINTERESTING. I tested running clear_commit_marks_many() to clear the UNINTERESTING flag inside close_reachable(), but the tips did not have the flag, so that did nothing. It turns out that the calculate_changed_submodule_paths() method is at fault. Thanks, Peff, for pointing out this detail! More specifically, for each submodule, the collect_changed_submodules() runs a revision walk to essentially do file-history on the list of submodules. That revision walk marks commits UNININTERESTING if they are simplified away by not changing the submodule. Instead, I finally arrived on the conclusion that I should use a flag that is not used in any other part of the code. In commit-reach.c, a number of flags were defined for commit walk algorithms. The REACHABLE flag seemed like it made the most sense, and it seems it was not actually used in the file. The REACHABLE flag was used in early versions of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make can_all_from_reach... linear, 2018-07-20). Add the REACHABLE flag to commit-graph.c and use it instead of UNINTERESTING in close_reachable(). This fixes the bug in manual testing. Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Helped-by: Szeder Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24 15:40:42 +02:00
commit->object.flags &= ~REACHABLE;
}
stop_progress(&ctx->progress);
}
static void compute_generation_numbers(struct write_commit_graph_context *ctx)
{
int i;
struct commit_list *list = NULL;
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
_("Computing commit graph generation numbers"),
ctx->commits.nr);
for (i = 0; i < ctx->commits.nr; i++) {
display_progress(ctx->progress, i + 1);
if (ctx->commits.list[i]->generation != GENERATION_NUMBER_INFINITY &&
ctx->commits.list[i]->generation != GENERATION_NUMBER_ZERO)
continue;
commit_list_insert(ctx->commits.list[i], &list);
while (list) {
struct commit *current = list->item;
struct commit_list *parent;
int all_parents_computed = 1;
uint32_t max_generation = 0;
for (parent = current->parents; parent; parent = parent->next) {
if (parent->item->generation == GENERATION_NUMBER_INFINITY ||
parent->item->generation == GENERATION_NUMBER_ZERO) {
all_parents_computed = 0;
commit_list_insert(parent->item, &list);
break;
} else if (parent->item->generation > max_generation) {
max_generation = parent->item->generation;
}
}
if (all_parents_computed) {
current->generation = max_generation + 1;
pop_commit(&list);
if (current->generation > GENERATION_NUMBER_MAX)
current->generation = GENERATION_NUMBER_MAX;
}
}
}
stop_progress(&ctx->progress);
}
static int add_ref_to_list(const char *refname,
const struct object_id *oid,
int flags, void *cb_data)
{
struct string_list *list = (struct string_list *)cb_data;
string_list_append(list, oid_to_hex(oid));
return 0;
}
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
int write_commit_graph_reachable(struct object_directory *odb,
enum commit_graph_write_flags flags,
const struct split_commit_graph_opts *split_opts)
{
struct string_list list = STRING_LIST_INIT_DUP;
int result;
for_each_ref(add_ref_to_list, &list);
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
result = write_commit_graph(odb, NULL, &list,
flags, split_opts);
string_list_clear(&list, 0);
return result;
}
static int fill_oids_from_packs(struct write_commit_graph_context *ctx,
struct string_list *pack_indexes)
{
uint32_t i;
struct strbuf progress_title = STRBUF_INIT;
struct strbuf packname = STRBUF_INIT;
int dirlen;
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
strbuf_addf(&packname, "%s/pack/", ctx->odb->path);
dirlen = packname.len;
if (ctx->report_progress) {
strbuf_addf(&progress_title,
Q_("Finding commits for commit graph in %d pack",
"Finding commits for commit graph in %d packs",
pack_indexes->nr),
pack_indexes->nr);
ctx->progress = start_delayed_progress(progress_title.buf, 0);
ctx->progress_done = 0;
}
for (i = 0; i < pack_indexes->nr; i++) {
struct packed_git *p;
strbuf_setlen(&packname, dirlen);
strbuf_addstr(&packname, pack_indexes->items[i].string);
p = add_packed_git(packname.buf, packname.len, 1);
if (!p) {
error(_("error adding pack %s"), packname.buf);
return -1;
}
if (open_pack_index(p)) {
error(_("error opening index for %s"), packname.buf);
return -1;
}
for_each_object_in_pack(p, add_packed_commits, ctx,
FOR_EACH_OBJECT_PACK_ORDER);
close_pack(p);
free(p);
}
stop_progress(&ctx->progress);
strbuf_release(&progress_title);
strbuf_release(&packname);
return 0;
}
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 10:02:40 +02:00
static int fill_oids_from_commit_hex(struct write_commit_graph_context *ctx,
struct string_list *commit_hex)
{
uint32_t i;
struct strbuf progress_title = STRBUF_INIT;
if (ctx->report_progress) {
strbuf_addf(&progress_title,
Q_("Finding commits for commit graph from %d ref",
"Finding commits for commit graph from %d refs",
commit_hex->nr),
commit_hex->nr);
ctx->progress = start_delayed_progress(
progress_title.buf,
commit_hex->nr);
}
for (i = 0; i < commit_hex->nr; i++) {
const char *end;
struct object_id oid;
struct commit *result;
display_progress(ctx->progress, i + 1);
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 10:02:40 +02:00
if (!parse_oid_hex(commit_hex->items[i].string, &oid, &end) &&
(result = lookup_commit_reference_gently(ctx->r, &oid, 1))) {
ALLOC_GROW(ctx->oids.list, ctx->oids.nr + 1, ctx->oids.alloc);
oidcpy(&ctx->oids.list[ctx->oids.nr], &(result->object.oid));
ctx->oids.nr++;
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 10:02:40 +02:00
} else if (ctx->check_oids) {
error(_("invalid commit object id: %s"),
commit_hex->items[i].string);
return -1;
}
}
stop_progress(&ctx->progress);
strbuf_release(&progress_title);
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 10:02:40 +02:00
return 0;
}
static void fill_oids_from_all_packs(struct write_commit_graph_context *ctx)
{
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
_("Finding commits for commit graph among packed objects"),
ctx->approx_nr_objects);
for_each_packed_object(add_packed_commits, ctx,
FOR_EACH_OBJECT_PACK_ORDER);
if (ctx->progress_done < ctx->approx_nr_objects)
display_progress(ctx->progress, ctx->approx_nr_objects);
stop_progress(&ctx->progress);
}
static uint32_t count_distinct_commits(struct write_commit_graph_context *ctx)
{
uint32_t i, count_distinct = 1;
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
commit-graph write: add itermediate progress Add progress output to sections of code between "Annotating[...]" and "Computing[...]generation numbers". This can collectively take 5-10 seconds on a large enough repository. On a test repository with I have with ~7 million commits and ~50 million objects we'll now emit: $ ~/g/git/git --exec-path=$HOME/g/git commit-graph write Finding commits for commit graph among packed objects: 100% (124763727/124763727), done. Loading known commits in commit graph: 100% (18989461/18989461), done. Expanding reachable commits in commit graph: 100% (18989507/18989461), done. Clearing commit marks in commit graph: 100% (18989507/18989507), done. Counting distinct commits in commit graph: 100% (18989507/18989507), done. Finding extra edges in commit graph: 100% (18989507/18989507), done. Computing commit graph generation numbers: 100% (7250302/7250302), done. Writing out commit graph in 4 passes: 100% (29001208/29001208), done. Whereas on a medium-sized repository such as linux.git these new progress bars won't have time to kick in and as before and we'll still emit output like: $ ~/g/git/git --exec-path=$HOME/g/git commit-graph write Finding commits for commit graph among packed objects: 100% (6529159/6529159), done. Expanding reachable commits in commit graph: 815990, done. Computing commit graph generation numbers: 100% (815983/815983), done. Writing out commit graph in 4 passes: 100% (3263932/3263932), done. The "Counting distinct commits in commit graph" phase will spend most of its time paused at "0/*" as we QSORT(...) the list. That's not optimal, but at least we don't seem to be stalling anymore most of the time. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:20 +01:00
_("Counting distinct commits in commit graph"),
ctx->oids.nr);
display_progress(ctx->progress, 0); /* TODO: Measure QSORT() progress */
QSORT(ctx->oids.list, ctx->oids.nr, oid_compare);
for (i = 1; i < ctx->oids.nr; i++) {
display_progress(ctx->progress, i + 1);
if (!oideq(&ctx->oids.list[i - 1], &ctx->oids.list[i])) {
if (ctx->split) {
struct commit *c = lookup_commit(ctx->r, &ctx->oids.list[i]);
if (!c || c->graph_pos != COMMIT_NOT_FROM_GRAPH)
continue;
}
count_distinct++;
}
}
stop_progress(&ctx->progress);
return count_distinct;
}
static void copy_oids_to_commits(struct write_commit_graph_context *ctx)
{
uint32_t i;
ctx->num_extra_edges = 0;
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
commit-graph write: add itermediate progress Add progress output to sections of code between "Annotating[...]" and "Computing[...]generation numbers". This can collectively take 5-10 seconds on a large enough repository. On a test repository with I have with ~7 million commits and ~50 million objects we'll now emit: $ ~/g/git/git --exec-path=$HOME/g/git commit-graph write Finding commits for commit graph among packed objects: 100% (124763727/124763727), done. Loading known commits in commit graph: 100% (18989461/18989461), done. Expanding reachable commits in commit graph: 100% (18989507/18989461), done. Clearing commit marks in commit graph: 100% (18989507/18989507), done. Counting distinct commits in commit graph: 100% (18989507/18989507), done. Finding extra edges in commit graph: 100% (18989507/18989507), done. Computing commit graph generation numbers: 100% (7250302/7250302), done. Writing out commit graph in 4 passes: 100% (29001208/29001208), done. Whereas on a medium-sized repository such as linux.git these new progress bars won't have time to kick in and as before and we'll still emit output like: $ ~/g/git/git --exec-path=$HOME/g/git commit-graph write Finding commits for commit graph among packed objects: 100% (6529159/6529159), done. Expanding reachable commits in commit graph: 815990, done. Computing commit graph generation numbers: 100% (815983/815983), done. Writing out commit graph in 4 passes: 100% (3263932/3263932), done. The "Counting distinct commits in commit graph" phase will spend most of its time paused at "0/*" as we QSORT(...) the list. That's not optimal, but at least we don't seem to be stalling anymore most of the time. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-19 21:21:20 +01:00
_("Finding extra edges in commit graph"),
ctx->oids.nr);
for (i = 0; i < ctx->oids.nr; i++) {
unsigned int num_parents;
display_progress(ctx->progress, i + 1);
if (i > 0 && oideq(&ctx->oids.list[i - 1], &ctx->oids.list[i]))
continue;
ALLOC_GROW(ctx->commits.list, ctx->commits.nr + 1, ctx->commits.alloc);
ctx->commits.list[ctx->commits.nr] = lookup_commit(ctx->r, &ctx->oids.list[i]);
if (ctx->split &&
ctx->commits.list[ctx->commits.nr]->graph_pos != COMMIT_NOT_FROM_GRAPH)
continue;
parse_commit_no_graph(ctx->commits.list[ctx->commits.nr]);
num_parents = commit_list_count(ctx->commits.list[ctx->commits.nr]->parents);
if (num_parents > 2)
ctx->num_extra_edges += num_parents - 1;
ctx->commits.nr++;
}
stop_progress(&ctx->progress);
}
static int write_graph_chunk_base_1(struct hashfile *f,
struct commit_graph *g)
{
int num = 0;
if (!g)
return 0;
num = write_graph_chunk_base_1(f, g->base_graph);
hashwrite(f, g->oid.hash, the_hash_algo->rawsz);
return num + 1;
}
static int write_graph_chunk_base(struct hashfile *f,
struct write_commit_graph_context *ctx)
{
int num = write_graph_chunk_base_1(f, ctx->new_base_graph);
if (num != ctx->num_commit_graphs_after - 1) {
error(_("failed to write correct number of base graph ids"));
return -1;
}
return 0;
}
static int write_commit_graph_file(struct write_commit_graph_context *ctx)
{
uint32_t i;
int fd;
struct hashfile *f;
struct lock_file lk = LOCK_INIT;
uint32_t chunk_ids[6];
uint64_t chunk_offsets[6];
const unsigned hashsz = the_hash_algo->rawsz;
struct strbuf progress_title = STRBUF_INIT;
int num_chunks = 3;
struct object_id file_hash;
if (ctx->split) {
struct strbuf tmp_file = STRBUF_INIT;
strbuf_addf(&tmp_file,
"%s/info/commit-graphs/tmp_graph_XXXXXX",
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
ctx->odb->path);
ctx->graph_name = strbuf_detach(&tmp_file, NULL);
} else {
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
ctx->graph_name = get_commit_graph_filename(ctx->odb->path);
}
if (safe_create_leading_directories(ctx->graph_name)) {
UNLEAK(ctx->graph_name);
error(_("unable to create leading directories of %s"),
ctx->graph_name);
return -1;
}
if (ctx->split) {
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
char *lock_name = get_chain_filename(ctx->odb->path);
hold_lock_file_for_update(&lk, lock_name, LOCK_DIE_ON_ERROR);
fd = git_mkstemp_mode(ctx->graph_name, 0444);
if (fd < 0) {
error(_("unable to create '%s'"), ctx->graph_name);
return -1;
}
f = hashfd(fd, ctx->graph_name);
} else {
hold_lock_file_for_update(&lk, ctx->graph_name, LOCK_DIE_ON_ERROR);
fd = lk.tempfile->fd;
f = hashfd(lk.tempfile->fd, lk.tempfile->filename.buf);
}
chunk_ids[0] = GRAPH_CHUNKID_OIDFANOUT;
chunk_ids[1] = GRAPH_CHUNKID_OIDLOOKUP;
chunk_ids[2] = GRAPH_CHUNKID_DATA;
if (ctx->num_extra_edges) {
chunk_ids[num_chunks] = GRAPH_CHUNKID_EXTRAEDGES;
num_chunks++;
}
if (ctx->num_commit_graphs_after > 1) {
chunk_ids[num_chunks] = GRAPH_CHUNKID_BASE;
num_chunks++;
}
chunk_ids[num_chunks] = 0;
chunk_offsets[0] = 8 + (num_chunks + 1) * GRAPH_CHUNKLOOKUP_WIDTH;
chunk_offsets[1] = chunk_offsets[0] + GRAPH_FANOUT_SIZE;
chunk_offsets[2] = chunk_offsets[1] + hashsz * ctx->commits.nr;
chunk_offsets[3] = chunk_offsets[2] + (hashsz + 16) * ctx->commits.nr;
num_chunks = 3;
if (ctx->num_extra_edges) {
chunk_offsets[num_chunks + 1] = chunk_offsets[num_chunks] +
4 * ctx->num_extra_edges;
num_chunks++;
}
if (ctx->num_commit_graphs_after > 1) {
chunk_offsets[num_chunks + 1] = chunk_offsets[num_chunks] +
hashsz * (ctx->num_commit_graphs_after - 1);
num_chunks++;
}
hashwrite_be32(f, GRAPH_SIGNATURE);
hashwrite_u8(f, GRAPH_VERSION);
hashwrite_u8(f, oid_version());
hashwrite_u8(f, num_chunks);
hashwrite_u8(f, ctx->num_commit_graphs_after - 1);
for (i = 0; i <= num_chunks; i++) {
uint32_t chunk_write[3];
chunk_write[0] = htonl(chunk_ids[i]);
chunk_write[1] = htonl(chunk_offsets[i] >> 32);
chunk_write[2] = htonl(chunk_offsets[i] & 0xffffffff);
hashwrite(f, chunk_write, 12);
}
if (ctx->report_progress) {
strbuf_addf(&progress_title,
Q_("Writing out commit graph in %d pass",
"Writing out commit graph in %d passes",
num_chunks),
num_chunks);
ctx->progress = start_delayed_progress(
progress_title.buf,
num_chunks * ctx->commits.nr);
}
write_graph_chunk_fanout(f, ctx);
write_graph_chunk_oids(f, hashsz, ctx);
write_graph_chunk_data(f, hashsz, ctx);
if (ctx->num_extra_edges)
write_graph_chunk_extra_edges(f, ctx);
if (ctx->num_commit_graphs_after > 1 &&
write_graph_chunk_base(f, ctx)) {
return -1;
}
stop_progress(&ctx->progress);
strbuf_release(&progress_title);
if (ctx->split && ctx->base_graph_name && ctx->num_commit_graphs_after > 1) {
char *new_base_hash = xstrdup(oid_to_hex(&ctx->new_base_graph->oid));
char *new_base_name = get_split_graph_filename(ctx->new_base_graph->odb->path, new_base_hash);
free(ctx->commit_graph_filenames_after[ctx->num_commit_graphs_after - 2]);
free(ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 2]);
ctx->commit_graph_filenames_after[ctx->num_commit_graphs_after - 2] = new_base_name;
ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 2] = new_base_hash;
}
close_commit_graph(ctx->r->objects);
finalize_hashfile(f, file_hash.hash, CSUM_HASH_IN_STREAM | CSUM_FSYNC);
if (ctx->split) {
FILE *chainf = fdopen_lock_file(&lk, "w");
char *final_graph_name;
int result;
close(fd);
if (!chainf) {
error(_("unable to open commit-graph chain file"));
return -1;
}
if (ctx->base_graph_name) {
const char *dest = ctx->commit_graph_filenames_after[
ctx->num_commit_graphs_after - 2];
if (strcmp(ctx->base_graph_name, dest)) {
result = rename(ctx->base_graph_name, dest);
if (result) {
error(_("failed to rename base commit-graph file"));
return -1;
}
}
} else {
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
char *graph_name = get_commit_graph_filename(ctx->odb->path);
unlink(graph_name);
}
ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 1] = xstrdup(oid_to_hex(&file_hash));
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
final_graph_name = get_split_graph_filename(ctx->odb->path,
ctx->commit_graph_hash_after[ctx->num_commit_graphs_after - 1]);
ctx->commit_graph_filenames_after[ctx->num_commit_graphs_after - 1] = final_graph_name;
result = rename(ctx->graph_name, final_graph_name);
for (i = 0; i < ctx->num_commit_graphs_after; i++)
fprintf(lk.tempfile->fp, "%s\n", ctx->commit_graph_hash_after[i]);
if (result) {
error(_("failed to rename temporary commit-graph file"));
return -1;
}
}
commit_lock_file(&lk);
return 0;
}
static void split_graph_merge_strategy(struct write_commit_graph_context *ctx)
{
struct commit_graph *g;
uint32_t num_commits;
uint32_t i;
int max_commits = 0;
int size_mult = 2;
if (ctx->split_opts) {
max_commits = ctx->split_opts->max_commits;
if (ctx->split_opts->size_multiple)
size_mult = ctx->split_opts->size_multiple;
}
g = ctx->r->objects->commit_graph;
num_commits = ctx->commits.nr;
ctx->num_commit_graphs_after = ctx->num_commit_graphs_before + 1;
while (g && (g->num_commits <= size_mult * num_commits ||
(max_commits && num_commits > max_commits))) {
if (strcmp(g->odb->path, ctx->odb->path))
break;
num_commits += g->num_commits;
g = g->base_graph;
ctx->num_commit_graphs_after--;
}
ctx->new_base_graph = g;
if (ctx->num_commit_graphs_after == 2) {
char *old_graph_name = get_commit_graph_filename(g->odb->path);
if (!strcmp(g->filename, old_graph_name) &&
strcmp(g->odb->path, ctx->odb->path)) {
ctx->num_commit_graphs_after = 1;
ctx->new_base_graph = NULL;
}
free(old_graph_name);
}
ALLOC_ARRAY(ctx->commit_graph_filenames_after, ctx->num_commit_graphs_after);
ALLOC_ARRAY(ctx->commit_graph_hash_after, ctx->num_commit_graphs_after);
for (i = 0; i < ctx->num_commit_graphs_after &&
i < ctx->num_commit_graphs_before; i++)
ctx->commit_graph_filenames_after[i] = xstrdup(ctx->commit_graph_filenames_before[i]);
i = ctx->num_commit_graphs_before - 1;
g = ctx->r->objects->commit_graph;
while (g) {
if (i < ctx->num_commit_graphs_after)
ctx->commit_graph_hash_after[i] = xstrdup(oid_to_hex(&g->oid));
i--;
g = g->base_graph;
}
}
static void merge_commit_graph(struct write_commit_graph_context *ctx,
struct commit_graph *g)
{
uint32_t i;
uint32_t offset = g->num_commits_in_base;
ALLOC_GROW(ctx->commits.list, ctx->commits.nr + g->num_commits, ctx->commits.alloc);
for (i = 0; i < g->num_commits; i++) {
struct object_id oid;
struct commit *result;
display_progress(ctx->progress, i + 1);
load_oid_from_graph(g, i + offset, &oid);
/* only add commits if they still exist in the repo */
result = lookup_commit_reference_gently(ctx->r, &oid, 1);
if (result) {
ctx->commits.list[ctx->commits.nr] = result;
ctx->commits.nr++;
}
}
}
static int commit_compare(const void *_a, const void *_b)
{
const struct commit *a = *(const struct commit **)_a;
const struct commit *b = *(const struct commit **)_b;
return oidcmp(&a->object.oid, &b->object.oid);
}
static void sort_and_scan_merged_commits(struct write_commit_graph_context *ctx)
{
uint32_t i;
if (ctx->report_progress)
ctx->progress = start_delayed_progress(
_("Scanning merged commits"),
ctx->commits.nr);
QSORT(ctx->commits.list, ctx->commits.nr, commit_compare);
ctx->num_extra_edges = 0;
for (i = 0; i < ctx->commits.nr; i++) {
display_progress(ctx->progress, i);
if (i && oideq(&ctx->commits.list[i - 1]->object.oid,
&ctx->commits.list[i]->object.oid)) {
die(_("unexpected duplicate commit id %s"),
oid_to_hex(&ctx->commits.list[i]->object.oid));
} else {
unsigned int num_parents;
num_parents = commit_list_count(ctx->commits.list[i]->parents);
if (num_parents > 2)
commit-graph: fix bug around octopus merges In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18), the method sort_and_scan_merged_commits() was added to merge the commit lists of two commit-graph files in the incremental format. Unfortunately, there was an off-by-one error in that method around incrementing num_extra_edges, which leads to an incorrect offset for the base graph chunk. When we store an octopus merge in the commit-graph file, we store the first parent in the normal place, but use the second parent position to point into the "extra edges" chunk where the remaining parents exist. This means we should be adding "num_parents - 1" edges to this list, not "num_parents - 2". That is the basic error. The reason this was not caught in the test suite is more subtle. In 5324-split-commit-graph.sh, we test creating an octopus merge and adding it to the tip of a commit-graph chain, then verify the result. This _should_ have caught the problem, except that when we load the commit-graph files we were overly careful to not fail when the commit-graph chain does not match. This care was on purpose to avoid race conditions as one process reads the chain and another process modifies it. In such a case, the reading process outputs the following message to stderr: warning: commit-graph chain does not match These warnings are output in the test suite, but ignored. By checking the stderr of `git commit-graph verify` to include the expected progress output, it will now catch this error. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 18:43:41 +02:00
ctx->num_extra_edges += num_parents - 1;
}
}
stop_progress(&ctx->progress);
}
static void merge_commit_graphs(struct write_commit_graph_context *ctx)
{
struct commit_graph *g = ctx->r->objects->commit_graph;
uint32_t current_graph_number = ctx->num_commit_graphs_before;
struct strbuf progress_title = STRBUF_INIT;
while (g && current_graph_number >= ctx->num_commit_graphs_after) {
current_graph_number--;
if (ctx->report_progress) {
strbuf_addstr(&progress_title, _("Merging commit-graph"));
ctx->progress = start_delayed_progress(progress_title.buf, 0);
}
merge_commit_graph(ctx, g);
stop_progress(&ctx->progress);
strbuf_release(&progress_title);
g = g->base_graph;
}
if (g) {
ctx->new_base_graph = g;
ctx->new_num_commits_in_base = g->num_commits + g->num_commits_in_base;
}
if (ctx->new_base_graph)
ctx->base_graph_name = xstrdup(ctx->new_base_graph->filename);
sort_and_scan_merged_commits(ctx);
}
static void mark_commit_graphs(struct write_commit_graph_context *ctx)
{
uint32_t i;
time_t now = time(NULL);
for (i = ctx->num_commit_graphs_after - 1; i < ctx->num_commit_graphs_before; i++) {
struct stat st;
struct utimbuf updated_time;
stat(ctx->commit_graph_filenames_before[i], &st);
updated_time.actime = st.st_atime;
updated_time.modtime = now;
utime(ctx->commit_graph_filenames_before[i], &updated_time);
}
}
static void expire_commit_graphs(struct write_commit_graph_context *ctx)
{
struct strbuf path = STRBUF_INIT;
DIR *dir;
struct dirent *de;
size_t dirnamelen;
timestamp_t expire_time = time(NULL);
if (ctx->split_opts && ctx->split_opts->expire_time)
expire_time -= ctx->split_opts->expire_time;
if (!ctx->split) {
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
char *chain_file_name = get_chain_filename(ctx->odb->path);
unlink(chain_file_name);
free(chain_file_name);
ctx->num_commit_graphs_after = 0;
}
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
strbuf_addstr(&path, ctx->odb->path);
strbuf_addstr(&path, "/info/commit-graphs");
dir = opendir(path.buf);
if (!dir)
goto out;
strbuf_addch(&path, '/');
dirnamelen = path.len;
while ((de = readdir(dir)) != NULL) {
struct stat st;
uint32_t i, found = 0;
strbuf_setlen(&path, dirnamelen);
strbuf_addstr(&path, de->d_name);
stat(path.buf, &st);
if (st.st_mtime > expire_time)
continue;
if (path.len < 6 || strcmp(path.buf + path.len - 6, ".graph"))
continue;
for (i = 0; i < ctx->num_commit_graphs_after; i++) {
if (!strcmp(ctx->commit_graph_filenames_after[i],
path.buf)) {
found = 1;
break;
}
}
if (!found)
unlink(path.buf);
}
out:
strbuf_release(&path);
}
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
int write_commit_graph(struct object_directory *odb,
struct string_list *pack_indexes,
struct string_list *commit_hex,
enum commit_graph_write_flags flags,
const struct split_commit_graph_opts *split_opts)
{
struct write_commit_graph_context *ctx;
uint32_t i, count_distinct = 0;
int res = 0;
if (!commit_graph_compatible(the_repository))
return 0;
ctx = xcalloc(1, sizeof(struct write_commit_graph_context));
ctx->r = the_repository;
commit-graph.h: store an odb in 'struct write_commit_graph_context' There are lots of places in 'commit-graph.h' where a function either has (or almost has) a full 'struct object_directory *', accesses '->path', and then throws away the rest of the struct. This can cause headaches when comparing the locations of object directories across alternates (e.g., in the case of deciding if two commit-graph layers can be merged). These paths are normalized with 'normalize_path_copy()' which mitigates some comparison issues, but not all [1]. Replace usage of 'char *object_dir' with 'odb->path' by storing a 'struct object_directory *' in the 'write_commit_graph_context' structure. This is an intermediate step towards getting rid of all path normalization in 'commit-graph.c'. Resolving a user-provided '--object-dir' argument now requires that we compare it to the known alternates for equality. Prior to this patch, an unknown '--object-dir' argument would silently exit with status zero. This can clearly lead to unintended behavior, such as verifying commit-graphs that aren't in a repository's own object store (or one of its alternates), or causing a typo to mask a legitimate commit-graph verification failure. Make this error non-silent by 'die()'-ing when the given '--object-dir' does not match any known alternate object store. [1]: In my testing, for example, I can get one side of the commit-graph code to fill object_dir with "./objects" and the other with just "objects". Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04 06:51:50 +01:00
ctx->odb = odb;
ctx->append = flags & COMMIT_GRAPH_WRITE_APPEND ? 1 : 0;
ctx->report_progress = flags & COMMIT_GRAPH_WRITE_PROGRESS ? 1 : 0;
ctx->split = flags & COMMIT_GRAPH_WRITE_SPLIT ? 1 : 0;
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 10:02:40 +02:00
ctx->check_oids = flags & COMMIT_GRAPH_WRITE_CHECK_OIDS ? 1 : 0;
ctx->split_opts = split_opts;
if (ctx->split) {
struct commit_graph *g;
prepare_commit_graph(ctx->r);
g = ctx->r->objects->commit_graph;
while (g) {
ctx->num_commit_graphs_before++;
g = g->base_graph;
}
if (ctx->num_commit_graphs_before) {
ALLOC_ARRAY(ctx->commit_graph_filenames_before, ctx->num_commit_graphs_before);
i = ctx->num_commit_graphs_before;
g = ctx->r->objects->commit_graph;
while (g) {
ctx->commit_graph_filenames_before[--i] = xstrdup(g->filename);
g = g->base_graph;
}
}
}
ctx->approx_nr_objects = approximate_object_count();
ctx->oids.alloc = ctx->approx_nr_objects / 32;
if (ctx->split && split_opts && ctx->oids.alloc > split_opts->max_commits)
ctx->oids.alloc = split_opts->max_commits;
if (ctx->append) {
prepare_commit_graph_one(ctx->r, ctx->odb);
if (ctx->r->objects->commit_graph)
ctx->oids.alloc += ctx->r->objects->commit_graph->num_commits;
}
if (ctx->oids.alloc < 1024)
ctx->oids.alloc = 1024;
ALLOC_ARRAY(ctx->oids.list, ctx->oids.alloc);
if (ctx->append && ctx->r->objects->commit_graph) {
struct commit_graph *g = ctx->r->objects->commit_graph;
for (i = 0; i < g->num_commits; i++) {
const unsigned char *hash = g->chunk_oid_lookup + g->hash_len * i;
hashcpy(ctx->oids.list[ctx->oids.nr++].hash, hash);
}
}
if (pack_indexes) {
if ((res = fill_oids_from_packs(ctx, pack_indexes)))
goto cleanup;
}
commit-graph: error out on invalid commit oids in 'write --stdin-commits' While 'git commit-graph write --stdin-commits' expects commit object ids as input, it accepts and silently skips over any invalid commit object ids, and still exits with success: # nonsense $ echo not-a-commit-oid | git commit-graph write --stdin-commits $ echo $? 0 # sometimes I forgot that refs are not good... $ echo HEAD | git commit-graph write --stdin-commits $ echo $? 0 # valid tree OID, but not a commit OID $ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits $ echo $? 0 $ ls -l .git/objects/info/commit-graph ls: cannot access '.git/objects/info/commit-graph': No such file or directory Check that all input records are indeed valid commit object ids and return with error otherwise, the same way '--stdin-packs' handles invalid input; see e103f7276f (commit-graph: return with errors during write, 2019-06-12). Note that it should only return with error when encountering an invalid commit object id coming from standard input. However, '--reachable' uses the same code path to process object ids pointed to by all refs, and that includes tag object ids as well, which should still be skipped over. Therefore add a new flag to 'enum commit_graph_write_flags' and a corresponding field to 'struct write_commit_graph_context', so we can differentiate between those two cases. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-05 10:02:40 +02:00
if (commit_hex) {
if ((res = fill_oids_from_commit_hex(ctx, commit_hex)))
goto cleanup;
}
if (!pack_indexes && !commit_hex)
fill_oids_from_all_packs(ctx);
close_reachable(ctx);
count_distinct = count_distinct_commits(ctx);
if (count_distinct >= GRAPH_EDGE_LAST_MASK) {
error(_("the commit graph format cannot write %d commits"), count_distinct);
res = -1;
goto cleanup;
}
ctx->commits.alloc = count_distinct;
ALLOC_ARRAY(ctx->commits.list, ctx->commits.alloc);
copy_oids_to_commits(ctx);
if (ctx->commits.nr >= GRAPH_EDGE_LAST_MASK) {
error(_("too many commits to write graph"));
res = -1;
goto cleanup;
}
if (!ctx->commits.nr)
goto cleanup;
if (ctx->split) {
split_graph_merge_strategy(ctx);
merge_commit_graphs(ctx);
} else
ctx->num_commit_graphs_after = 1;
compute_generation_numbers(ctx);
res = write_commit_graph_file(ctx);
if (ctx->split)
mark_commit_graphs(ctx);
expire_commit_graphs(ctx);
cleanup:
free(ctx->graph_name);
free(ctx->commits.list);
free(ctx->oids.list);
if (ctx->commit_graph_filenames_after) {
for (i = 0; i < ctx->num_commit_graphs_after; i++) {
free(ctx->commit_graph_filenames_after[i]);
free(ctx->commit_graph_hash_after[i]);
}
for (i = 0; i < ctx->num_commit_graphs_before; i++)
free(ctx->commit_graph_filenames_before[i]);
free(ctx->commit_graph_filenames_after);
free(ctx->commit_graph_filenames_before);
free(ctx->commit_graph_hash_after);
}
free(ctx);
return res;
}
#define VERIFY_COMMIT_GRAPH_ERROR_HASH 2
static int verify_commit_graph_error;
static void graph_report(const char *fmt, ...)
{
va_list ap;
verify_commit_graph_error = 1;
va_start(ap, fmt);
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
va_end(ap);
}
#define GENERATION_ZERO_EXISTS 1
#define GENERATION_NUMBER_EXISTS 2
int verify_commit_graph(struct repository *r, struct commit_graph *g, int flags)
{
uint32_t i, cur_fanout_pos = 0;
struct object_id prev_oid, cur_oid, checksum;
int generation_zero = 0;
struct hashfile *f;
int devnull;
struct progress *progress = NULL;
int local_error = 0;
if (!g) {
graph_report("no commit-graph file loaded");
return 1;
}
commit-graph: fix segfault on e.g. "git status" When core.commitGraph=true is set, various common commands now consult the commit graph. Because the commit-graph code is very trusting of its input data, it's possibly to construct a graph that'll cause an immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In some other cases where git immediately exits with a cryptic error about the graph being broken. The root cause of this is that while the "commit-graph verify" sub-command exhaustively verifies the graph, other users of the graph simply trust the graph, and will e.g. deference data found at certain offsets as pointers, causing segfaults. This change does the bare minimum to ensure that we don't segfault in the common fill_commit_in_graph() codepath called by e.g. setup_revisions(), to do this instrument the "commit-graph verify" tests to always check if "status" would subsequently segfault. This fixes the following tests which would previously segfault: not ok 50 - detect low chunk count not ok 51 - detect missing OID fanout chunk not ok 52 - detect missing OID lookup chunk not ok 53 - detect missing commit data chunk Those happened because with the commit-graph enabled setup_revisions() would eventually call fill_commit_in_graph(), where e.g. g->chunk_commit_data is used early as an offset (and will be 0x0). With this change we get far enough to detect that the graph is broken, and show an error instead. E.g.: $ git status; echo $? error: commit-graph is missing the Commit Data chunk 1 That also sucks, we should *warn* and not hard-fail "status" just because the commit-graph is corrupt, but fixing is left to a follow-up change. A side-effect of changing the reporting from graph_report() to error() is that we now have an "error: " prefix for these even for "commit-graph verify". Pseudo-diff before/after: $ git commit-graph verify -commit-graph is missing the Commit Data chunk +error: commit-graph is missing the Commit Data chunk Changing that is OK. Various errors it emits now early on are prefixed with "error: ", moving these over and changing the output doesn't break anything. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-25 13:08:29 +01:00
verify_commit_graph_error = verify_commit_graph_lite(g);
if (verify_commit_graph_error)
return verify_commit_graph_error;
devnull = open("/dev/null", O_WRONLY);
f = hashfd(devnull, NULL);
hashwrite(f, g->data, g->data_len - g->hash_len);
finalize_hashfile(f, checksum.hash, CSUM_CLOSE);
if (!hasheq(checksum.hash, g->data + g->data_len - g->hash_len)) {
graph_report(_("the commit-graph file has incorrect checksum and is likely corrupt"));
verify_commit_graph_error = VERIFY_COMMIT_GRAPH_ERROR_HASH;
}
for (i = 0; i < g->num_commits; i++) {
struct commit *graph_commit;
hashcpy(cur_oid.hash, g->chunk_oid_lookup + g->hash_len * i);
if (i && oidcmp(&prev_oid, &cur_oid) >= 0)
graph_report(_("commit-graph has incorrect OID order: %s then %s"),
oid_to_hex(&prev_oid),
oid_to_hex(&cur_oid));
oidcpy(&prev_oid, &cur_oid);
while (cur_oid.hash[0] > cur_fanout_pos) {
uint32_t fanout_value = get_be32(g->chunk_oid_fanout + cur_fanout_pos);
if (i != fanout_value)
graph_report(_("commit-graph has incorrect fanout value: fanout[%d] = %u != %u"),
cur_fanout_pos, fanout_value, i);
cur_fanout_pos++;
}
graph_commit = lookup_commit(r, &cur_oid);
if (!parse_commit_in_graph_one(r, g, graph_commit))
graph_report(_("failed to parse commit %s from commit-graph"),
oid_to_hex(&cur_oid));
}
while (cur_fanout_pos < 256) {
uint32_t fanout_value = get_be32(g->chunk_oid_fanout + cur_fanout_pos);
if (g->num_commits != fanout_value)
graph_report(_("commit-graph has incorrect fanout value: fanout[%d] = %u != %u"),
cur_fanout_pos, fanout_value, i);
cur_fanout_pos++;
}
if (verify_commit_graph_error & ~VERIFY_COMMIT_GRAPH_ERROR_HASH)
return verify_commit_graph_error;
if (flags & COMMIT_GRAPH_WRITE_PROGRESS)
progress = start_progress(_("Verifying commits in commit graph"),
g->num_commits);
for (i = 0; i < g->num_commits; i++) {
struct commit *graph_commit, *odb_commit;
struct commit_list *graph_parents, *odb_parents;
uint32_t max_generation = 0;
display_progress(progress, i + 1);
hashcpy(cur_oid.hash, g->chunk_oid_lookup + g->hash_len * i);
graph_commit = lookup_commit(r, &cur_oid);
odb_commit = (struct commit *)create_object(r, &cur_oid, alloc_commit_node(r));
if (parse_commit_internal(odb_commit, 0, 0)) {
graph_report(_("failed to parse commit %s from object database for commit-graph"),
oid_to_hex(&cur_oid));
continue;
}
if (!oideq(&get_commit_tree_in_graph_one(r, g, graph_commit)->object.oid,
get_commit_tree_oid(odb_commit)))
graph_report(_("root tree OID for commit %s in commit-graph is %s != %s"),
oid_to_hex(&cur_oid),
oid_to_hex(get_commit_tree_oid(graph_commit)),
oid_to_hex(get_commit_tree_oid(odb_commit)));
graph_parents = graph_commit->parents;
odb_parents = odb_commit->parents;
while (graph_parents) {
if (odb_parents == NULL) {
graph_report(_("commit-graph parent list for commit %s is too long"),
oid_to_hex(&cur_oid));
break;
}
/* parse parent in case it is in a base graph */
parse_commit_in_graph_one(r, g, graph_parents->item);
if (!oideq(&graph_parents->item->object.oid, &odb_parents->item->object.oid))
graph_report(_("commit-graph parent for %s is %s != %s"),
oid_to_hex(&cur_oid),
oid_to_hex(&graph_parents->item->object.oid),
oid_to_hex(&odb_parents->item->object.oid));
if (graph_parents->item->generation > max_generation)
max_generation = graph_parents->item->generation;
graph_parents = graph_parents->next;
odb_parents = odb_parents->next;
}
if (odb_parents != NULL)
graph_report(_("commit-graph parent list for commit %s terminates early"),
oid_to_hex(&cur_oid));
if (!graph_commit->generation) {
if (generation_zero == GENERATION_NUMBER_EXISTS)
graph_report(_("commit-graph has generation number zero for commit %s, but non-zero elsewhere"),
oid_to_hex(&cur_oid));
generation_zero = GENERATION_ZERO_EXISTS;
} else if (generation_zero == GENERATION_ZERO_EXISTS)
graph_report(_("commit-graph has non-zero generation number for commit %s, but zero elsewhere"),
oid_to_hex(&cur_oid));
if (generation_zero == GENERATION_ZERO_EXISTS)
continue;
/*
* If one of our parents has generation GENERATION_NUMBER_MAX, then
* our generation is also GENERATION_NUMBER_MAX. Decrement to avoid
* extra logic in the following condition.
*/
if (max_generation == GENERATION_NUMBER_MAX)
max_generation--;
if (graph_commit->generation != max_generation + 1)
graph_report(_("commit-graph generation for commit %s is %u != %u"),
oid_to_hex(&cur_oid),
graph_commit->generation,
max_generation + 1);
if (graph_commit->date != odb_commit->date)
graph_report(_("commit date for commit %s in commit-graph is %"PRItime" != %"PRItime),
oid_to_hex(&cur_oid),
graph_commit->date,
odb_commit->date);
}
stop_progress(&progress);
local_error = verify_commit_graph_error;
if (!(flags & COMMIT_GRAPH_VERIFY_SHALLOW) && g->base_graph)
local_error |= verify_commit_graph(r, g->base_graph, flags);
return local_error;
}
void free_commit_graph(struct commit_graph *g)
{
if (!g)
return;
if (g->graph_fd >= 0) {
munmap((void *)g->data, g->data_len);
g->data = NULL;
close(g->graph_fd);
}
free(g->filename);
free(g);
}
upload-pack: disable commit graph more gently for shallow traversal When the client has asked for certain shallow options like "deepen-since", we do a custom rev-list walk that pretends to be shallow. Before doing so, we have to disable the commit-graph, since it is not compatible with the shallow view of the repository. That's handled by 829a321569 (commit-graph: close_commit_graph before shallow walk, 2018-08-20). That commit literally closes and frees our repo->objects->commit_graph struct. That creates an interesting problem for commits that have _already_ been parsed using the commit graph. Their commit->object.parsed flag is set, their commit->graph_pos is set, but their commit->maybe_tree may still be NULL. When somebody later calls repo_get_commit_tree(), we see that we haven't loaded the tree oid yet and try to get it from the commit graph. But since it has been freed, we segfault! So the root of the issue is a data dependency between the commit's lazy-load of the tree oid and the fact that the commit graph can go away mid-process. How can we resolve it? There are a couple of general approaches: 1. The obvious answer is to avoid loading the tree from the graph when we see that it's NULL. But then what do we return for the tree oid? If we return NULL, our caller in do_traverse() will rightly complain that we have no tree. We'd have to fallback to loading the actual commit object and re-parsing it. That requires teaching parse_commit_buffer() to understand re-parsing (i.e., not starting from a clean slate and not leaking any allocated bits like parent list pointers). 2. When we close the commit graph, walk through the set of in-memory objects and clear any graph_pos pointers. But this means we also have to "unparse" any such commits so that we know they still need to open the commit object to fill in their trees. So it's no less complicated than (1), and is more expensive (since we clear objects we might not later need). 3. Stop freeing the commit-graph struct. Continue to let it be used for lazy-loads of tree oids, but let upload-pack specify that it shouldn't be used for further commit parsing. 4. Push the whole shallow rev-list out to its own sub-process, with the commit-graph disabled from the start, giving it a clean memory space to work from. I've chosen (3) here. Options (1) and (2) would work, but are non-trivial to implement. Option (4) is more expensive, and I'm not sure how complicated it is (shelling out for the actual rev-list part is easy, but we do then parse the resulting commits internally, and I'm not clear which parts need to be handling shallow-ness). The new test in t5500 triggers this segfault, but see the comments there for how horribly intimate it has to be with how both upload-pack and commit graphs work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 16:44:45 +02:00
void disable_commit_graph(struct repository *r)
{
r->commit_graph_disabled = 1;
}